* the spec to check if changing the topic between PM and
public to see if the upload security status is changed
is already covered extensively in topic_upload_security_manager_spec.rb
Basically, say you had already downloaded a certain image from a certain URL
using pull_hotlinked_images and the onebox. The upload would be stored
by its sha as an upload record. Whenever you linked to the same URL again
in a post (e.g. in our case an og:image on review.discourse) we would
would reuse the original upload record because of the sha1.
However when you turned on secure media this could cause problems as
the first post that uses that upload after secure media is enabled
will set the access control post for the upload to the new post.
Then if the post is deleted every single onebox/link to that same image
URL will fail forever with 403 as the secure-media-uploads URL fails
if the access control post has been deleted.
To fix this when cooking posts and pulling hotlinked images, we only
allow using an original upload by URL if its access control post
matches the current post, and if the original_sha1 is filled in,
meaning it was uploaded AFTER secure media was enabled. otherwise
we just redownload the media again to be safe, as the URL will always
be new then.
Regression was created here:
https://github.com/discourse/discourse/pull/8750
When tag or category is added and the user is watching that category/tag
we changed notification type to `edited` instead of `new post`.
However, the logic here should be a little bit more sophisticated.
If the user has already seen the post, notification should be `edited`.
However, when user hasn't yet seen post, notification should be "new
reply". The case for that is when for example topic is under private
category and set for publishing later. In that case, we modify an
existing topic, however, for a user, it is like a new post.
Discussion on meta:
https://meta.discourse.org/t/publication-of-timed-topics-dont-trigger-new-topic-notifications/139335/13
Add TopicUploadSecurityManager to handle post moves. When a post moves around or a topic changes between categories and public/private message status the uploads connected to posts in the topic need to have their secure status updated, depending on the security context the topic now lives in.
There is a feature, that when tag or category is added to the topic,
customers who are watching that category or tag are notified.
The problem is that it is using default notification type "new post"
It would be better to use "new post" only when there really is a new
post and "edited" when categories or tags were modified.
### General Changes and Duplication
* We now consider a post `with_secure_media?` if it is in a read-restricted category.
* When uploading we now set an upload's secure status straight away.
* When uploading if `SiteSetting.secure_media` is enabled, we do not check to see if the upload already exists using the `sha1` digest of the upload. The `sha1` column of the upload is filled with a `SecureRandom.hex(20)` value which is the same length as `Upload::SHA1_LENGTH`. The `original_sha1` column is filled with the _real_ sha1 digest of the file.
* Whether an upload `should_be_secure?` is now determined by whether the `access_control_post` is `with_secure_media?` (if there is no access control post then we leave the secure status as is).
* When serializing the upload, we now cook the URL if the upload is secure. This is so it shows up correctly in the composer preview, because we set secure status on upload.
### Viewing Secure Media
* The secure-media-upload URL will take the post that the upload is attached to into account via `Guardian.can_see?` for access permissions
* If there is no `access_control_post` then we just deliver the media. This should be a rare occurrance and shouldn't cause issues as the `access_control_post` is set when `link_post_uploads` is called via `CookedPostProcessor`
### Removed
We no longer do any of these because we do not reuse uploads by sha1 if secure media is enabled.
* We no longer have a way to prevent cross-posting of a secure upload from a private context to a public context.
* We no longer have to set `secure: false` for uploads when uploading for a theme component.
6e1fe22 introduced the possiblity for category_users to have a NULL notification_level, so that we can store `last_seen_at` dates without locking the notification level. At the time, this did not affect the topic-tracking-state query. However, the query changes in f434de2 introduced a slight change in behavior.
Previously, a subquery would look for a category_user with notification_level=mute. f434de2 refactored this to remove the subquery, and inverted some of the logic to suit.
The new query checked for `notification_level <> :muted`. If `notification_level` is NULL, this comparison will return NULL. In this scenario, notification_level=NULL means that we should fall back to the default tracking level (regular), and so we want the expression to resolve as true, not false. There was already a check for the existence of the category_users row, but it did not check for the existence of a NOT NULL notification_level.
This commit amends the expression so that the notification_level will only be compared if it is non-null.
* FIX: bulk insert to create application requests
* FIX: bulk insert to create topics
* FIX: no need to create separate user for each topic, post etc.
* FIX: Another bulk_insert of ApplicationRequests
* FIX: dont create user and topic instances when not neccessary
* FIX: merge examples with expensive setup into one example
Previously, categories without any topics were being excluded from the UPDATE query. This means the counter gets stuck, and the category cannot be deleted. This change ensures that the counters get correctly set to zero.
Restore tl3 reachability by calculating penalty counts vs unsuspend/unsilence.
Only count unsuspend or unsilences that have been made by a user other than
the Discourse system user.
API keys are now only visible when first created. After that, only the first four characters are stored in the database for identification, along with an sha256 hash of the full key. This makes key usage easier to audit, and ensures attackers would not have access to the live site in the event of a database leak.
This makes the merge lower risk, because we have some time to revert if needed. Once the change is confirmed to be working, we will add a second commit to drop the `key` column.
We like to stay as close as possible to latest with rubocop cause the cops
get better.
This update required some code changes, specifically the default is to avoid
explicit returns where implicit is done
Also this renames a few rules
When the tag is muted and topic contains that tag, we should not mark that message as NEW.
There are 3 possible settings which site admin can set.
remove_muted_tags_from_latest - always
It means that if the topic got at least one muted tag, we should not mark that topic as NEW
remove_muted_tags_from_latest - only muted
Similar to above, however, if at least one tag is not muted, the topic is marked as NEW
remove_muted_tags_from_latest - never
Basically, mute tag setting is ignored and all topics are set as NEW
Previously it was unclear why certain gems are being held back cause Gemfile
had no comment explaining it.
I tried to add some explanation from memory and remove some exceptions that
seemed to be superfluous.
This upgrades shoulda to latest, it appears to work once a couple of assertions
are removed
Also update http accept language used to auto detect language from http header
this is tested
Zeitwerk small update seems fine
This feature adds the ability to define synonyms for tags, and the ability to merge one tag into another while keeping it as a synonym. For example, tags named "js" and "java-script" can be synonyms of "javascript". When searching and creating topics using synonyms, they will be mapped to the base tag.
Along with this change is a new UI found on each tag's page (for example, `/tags/javascript`) where more information about the tag can be shown. It will list the synonyms, which categories it's restricted to (if any), and which tag groups it belongs to (if tag group names are public on the `/tags` page by enabling the "tags listed by group" setting). Staff users will be able to manage tags in this UI, merge tags, and add/remove synonyms.
* FEATURE: Ability to add components to all themes
This is the first and functional step from that topic https://dev.discourse.org/t/adding-a-theme-component-is-too-much-work/15398/16
The idea here is that when a new component is added, the user can easily assign it to all themes (parents).
To achieve that, I needed to change a site-setting component to accept `setDefaultValues` action and `setDefaultValuesLabel` translated label.
Also, I needed to add `allowAny` option to disable that for theme selector.
I also refactored backend to accept both parent and child ids with one method to avoid duplication (Renamed `add_child_theme!` to more general `add_relative_theme!`)
* FIX: Improvement after code review
* FIX: Improvement after code review2
* FIX: use mapBy and filterBy directly
When uploading a file to a theme component, and that file is existing and has already been marked as secure, we now automatically mark the file as secure: false, change the ACL, and log the action as the user (also rebake the posts for the upload)
PG 12 changes internals in a subtle way, time jitter is noticed in a few new
spots (which is normal) and default ordering is a bit different which is meant
to be random anyway.
* Add timezone to user_options table
* Also migrate existing timezone values from UserCustomField,
which is where the discourse-calendar plugin is storing them
* Allow user to change their core timezone from Profile
* Auto guess & set timezone on login & invite accept & signup
* Serialize user_options.timezone for group members. this is so discourse-group-timezones can access the core user timezone, as it is being removed in discourse-calendar.
* Annotate user_option with timezone
* Validate timezone values
This PR introduces a new secure media setting. When enabled, it prevent unathorized access to media uploads (files of type image, video and audio). When the `login_required` setting is enabled, then all media uploads will be protected from unauthorized (anonymous) access. When `login_required`is disabled, only media in private messages will be protected from unauthorized access.
A few notes:
- the `prevent_anons_from_downloading_files` setting no longer applies to audio and video uploads
- the `secure_media` setting can only be enabled if S3 uploads are already enabled and configured
- upload records have a new column, `secure`, which is a boolean `true/false` of the upload's secure status
- when creating a public post with an upload that has already been uploaded and is marked as secure, the post creator will raise an error
- when enabling or disabling the setting on a site with existing uploads, the rake task `uploads:ensure_correct_acl` should be used to update all uploads' secure status and their ACL on S3
Previously people were not consistent about mocking which left internals in
a fragile state when running subfolder specs.
This introduces a simple helper `set_subfolder` which you can use to set
the subfolder for the spec. It takes care of proper configuration of subfolder
and teardown.
```
# usage
set_subfolder "/my_amazing_subfolder"
```
You should no longer stub base_uri or global_settings
* Fix user title logic when badge name customized
* Fix an issue where a user's title was not considered a badge granted title when the user used a badge for their title and the badge name was customized. this affected the effectiveness of revoke_ungranted_titles! which only operates on badge_granted_titles.
* When a user's title is set now it is considered a badge_granted_title if the badge name OR the badge custom name from TranslationOverride is the same as the title
* When a user's badge is revoked we now also revoke their title if the user's title matches the badge name OR the badge custom name from TranslationOverride
* Add a user history log when the title is revoked to remove confusion about why titles are revoked
* Add granted_title_badge_id to user_profile, now when we set badge_granted_title on a user profile when updating a user's title based on a badge, we also remember which badge matched the title
* When badge name (or custom text) changes update titles of users in a background job
* When the name of a badge changes, or in the case of system badges when their custom translation text changes, then we need to update the title of all corresponding users who have a badge_granted_title and matching granted_title_badge_id. In the case of system badges we need to first get the proper badge ID based on the translation key e.g. badges.regular.name
* Add migration to backfill all granted_title_badge_ids for both normal badge name titles and titles using custom badge text.
Instead of enabling `suppress_from_latest` setting on many categories now we can enable `mute_all_categories_by_default` site setting. Then users should opt-in to categories for them to appear in the latest and categories pages.
- Allow revoking keys without deleting them
- Auto-revoke keys after a period of no use (default 6 months)
- Allow multiple keys per user
- Allow attaching a description to each key, for easier auditing
- Log changes to keys in the staff action log
- Move all key management to one place, and improve the UI
This is a major change to draft internals. Previously there were quite a
few cases where the draft system would say "draft saved", when in fact
we just skipped saving.
This commit ensures the draft system deals with draft ownership handover in
a predictable way.
For example:
- Window 1 editing draft
- Window 2 editing same draft at the same time
Previously we would allow window 1 and 2 to just fight on the same draft
each window overwriting the same draft over an over.
This commit introduces an ownership concept where either window 1 or 2 win
and user is prompted on the loser window to reload screen to correct the issue
This also corrects edge cases where a user could have multiple browser windows
open and posts in 1 window, later to post in the second window. Previously
drafts would break in the second window, this corrects it.
Break up single large example into multiple examples, using fab! to maintain performance. On my machine, this speeds up the test slightly, and also makes it more readable.
Doing .pluck(:column).first is a very common pattern in Discourse and in
most cases, a limit cause isn't being added. Instead of adding a limit
clause to all these callsites, this commit adds two new methods to
ActiveRecord::Relation:
pluck_first, equivalent to limit(1).pluck(*columns).first
and pluck_first! which, like other finder methods, raises an exception
when no record is found
Under exceptional situations the automatic draft feature can fail.
This new **hidden, default off** site setting
`backup_drafts_to_pm_length` will automatically backup any draft that is
saved by the system to a dedicated PM (originating from self)
The body of that PM will contain the text of the reply.
We can enable this feature strategically on sites exhibiting issues to
diagnose issues with the draft system and offer a recourse to users who
appear to lose drafts. We automatically checkpoint these drafts every 5
minutes forcing a new revision each 5 minutes so you can revert to old
content.
Longer term we are considering automatically enabling this kind of feature
for extremely long drafts where the risk is really high one could lose
days of writing.
When a category has a subcategory, we ensure that no one who can see the
subcategory cannot see the parent. However, we don't take into account
the fact that, when no CategoryGroups exist, the default is that
everyone has full permissions.
Moving posts also moves the read state (`topic_users` table) to the destination topic. This changes that behavior so that only users who posted in the destination topic will have the original notification level (probably "watching") of the original topic. The notification level for all other users will be set to "regular".
Previously the 'local_cdn_url' method didn't returned the correct cdn url. So we written few incorrect spec tests too.\n\nf92a6f7ac5228342177bf089d269e2f69a69e2f5
When an admin changes the site setting slug_generation_method to
encoded, we weren't really encoding the slug, but just allowing non-ascii
characters in the slug (unicode).
That brings problems when a user posts a link to topic without the slug, as
our topic controller tries to redirect the user to the correct URL that contains
the slug with unicode characters. Having unicode in the Location header in a
response is a RFC violation and some browsers end up in a redirection loop.
Bug report: https://meta.discourse.org/t/-/125371?u=falco
This commit also checks if a site uses encoded slugs and clear all saved slugs
in the db so they can be regenerated using an onceoff job.
Post timings are created by `topic_id` and `post_number` and it's possible that the destination topic already contains post timings for non-existent posts. For example, this can happen if the destination topic was previously split and Discourse recorded post timings for moved posts in the destination topic.
This commit ensures that all timings which reference non-existent posts are deleted from the destination topic before the posts are moved.
Zeitwerk simplifies working with dependencies in dev and makes it easier reloading class chains.
We no longer need to use Rails "require_dependency" anywhere and instead can just use standard
Ruby patterns to require files.
This is a far reaching change and we expect some followups here.
Adds 2 factor authentication method via second factor security keys over [web authn](https://developer.mozilla.org/en-US/docs/Web/API/Web_Authentication_API).
Allows a user to authenticate a second factor on login, login-via-email, admin-login, and change password routes. Adds registration area within existing user second factor preferences to register multiple security keys. Supports both external (yubikey) and built-in (macOS/android fingerprint readers).
Currently, the topic is only validated for censored words and should be validated for blocked words as well.
Blocked word validation is now used by both Post and Topic. To avoid code duplication, I extracted blocked words validation code into separate Validator, and use it in both places.
The only downside is that even if the topic contains blocked words validation message is saying "Your post contains a word that's not allowed: tomato" but I think this is descriptive enough.
Forums without previously calculated scores would return the same values
for low/medium/high sensitivity. Now those are scaled based on the
default value.
The default value has also been changed from 10.0 to 12.5 based on
observing data from live discourse forums.
Prior to the new review queue there were a couple special cases where
posts would be auto hidden:
* If a TL3 or above flagged a TL0 post as spam
* If a TL4 or above flagged a non-staff, non-TL4 post as spam, inappropriate or off
topic.
These cases are now removed in favour of the scoring system.
The URL '/images/transparent.png' will be used in the cooked content if upload record not found. In that case we have to use 'short_url' as image src in 'post.each_upload_url' method.
* FIX: User should get notified when a post is deleted
* FEATURE: Notify posters when restoring flagged posts
* Fix typo
Co-Authored-By: Régis Hanol <regis@hanol.fr>
* Improve tests
* The read indicator now shows up when no member has read the last post of the topic (written by a non-member)
* The read indicator works on mobile and receives live updates from message bus
* The icon we display in the topic list was changed
* Added a title to the indicator to indicate its purpose when hovering over it
The client-side theme-selector would always apply the first in a series of file change notifications. This has been fixed, so it now applies the most recent notification.
Duplicate notifications were being sent because
- The remote_theme autosave was causing every change notification to be doubled
- Color scheme change notifications were being sent every time a theme was uploaded, even if the colors were unchanged
These duplicate notifications have been fixed, and a spec added to ensure it does not regress in future
When activating a user via an external provider, this would cause the "this account is not activated" message to show on the first attempt, even though the account had been activated correctly.
* Revert "Revert "FEATURE: Publish read state on group messages. (#7989) [Undo revert] (#8024)""
This reverts commit 36425eb9f0.
* Fix: Show who read only if the attribute is enabled
* PERF: Precalculate the last post readed by a group member
* Use book-reader icon instear of far-eye
* FIX: update topic groups correctly
* DEV: Tidy up read indicator update on write
This change allows themes and components access to theme assets.
This means that inside theme js you can now get the URL for an asset with:
```
settings.theme_uploads.name
```
* Reenable: "FEATURE: Publish read state on group messages. (#7989)"
This reverts commit 67f5cc1ce8.
* FIX: Read indicator only appears when the group setting is enabled
* Enable or disable read state based on group attribute
* When read state needs to be published, the minimum unread count is calculated in the topic query. This way, we can know if someone reads the last post
* The option can be enabled/disabled from the UI
* The read indicator will live-updated using message bus
* Show read indicator on every post
* The read indicator now shows read count and can be expanded to see user avatars
* Read count gets updated everytime someone reads a message
* Simplify topic-list read indicator logic
* Unsubscribe from message bus on willDestroyElement, removed unnecesarry values from post-menu, and added a comment to explain where does minimum_unread_count comes from
Previously we relied on side effects to set tracking state correctly
when inviting groups to messages
Also has a minor optimisation in that we use pluck instead of pulling in
full record
Previously we would unconditionally issue an "invited_to_pm" notification
to all non muting users.
New behavior
- Watching and Watching first post get notified
- Tracking get a new "summary" message
- The rest get nothing
This is consistent with topic creation and way clearer
If enabled, this will fire a webhook whenever a user's notification has
been created. This could potentially be a lot of data depending on your
forum, and should be used carefully since it includes everything all users
will see in their feeds.
There are 5 visibility levels (similar to group visibility)
public (default)
logged-in users
members only
staff
owners
Admins & group owners always have visibility to group members.
Theme developers can now add any of the transformed color variables to their color scheme in about.json. For example
```
"color_schemes": {
"Light": {
"primary": "333333",
"secondary": "ffffff",
"primary-low": "ff0000"
}
},
```
would override the primary-low variable when compiling SCSS for the color scheme. The primary-low variable will also be visible in administrator color palette UI.
If a post is flagged after an action was already performed on it, it
will update the previous Reviable instance and not create a new one.
The notification logic was implemented in the :create callback which was
completely skipped in this case.
There are situations where depending on site settings, actions could be
taken due to flags (for example, hiding a post) but those actions were
not visibile in the review queue due to visibility settings.
This patch makes sure that the minimum score required for an action such
as hiding a post needs to meet the visibility for a moderator to see it.
This feature allows @ mentions to prioritize showing members of a group who
have explicit permission to a category.
This makes it far easier to @ mention group member when composing topics in
categories where only the group has access.
For example:
If Sam, Jane an Joan have access to bugs category.
Then `@` will auto complete to (jane,joan,sam) ordered on last seen at
This feature works on new topics and existing topics. There is an explicit
exclusion of trust level 0,1,2 groups cause they get too big.
* UX: Rename "Keep Post" to "Keep Post Hidden" when hidden
This is based on this feedback:
https://meta.discourse.org/t/category-group-review-moderation/116478/19
When a post is hidden this makes the operation much more clear.
* REFACTOR: Better support for aliases for actions
Allow calls on alias actions and delegate to the original one.
This is less code but also simplifies tests where the action might
be "agree_and_keep" or "agree_and_keep_hidden" which are the same.
When `SiteSetting.embed_truncate` is enabled (by default), the truncated
string is mutatable and does not raise an error.
However, when the setting is disabled, the `contents` string is frozen
and immutable, and will raise a `FrozenError`.
No need to let notifications stay around when users can't access
a topic after it was converted into a PM or posts were moved
into a restricted topic.
Also makes sure that moving to a new topic correctly uses the
guardian for the first post by enqueuing jobs outside of a
transaction.
Previously, users who had any penalties (were silenced or suspended)
were not allowed to promote to Trust Level 3.
There is also a more subtle change here: if users were silenced or
suspended and then the operation was reverted (user was un-silenced
or un-suspended), then it would have been like the user was never
penalized in the first place. This is no longer the case. To forgive a
user earlier, administrators can use "Clear Penalty History" feature.
Lastly, Jobs::UnsilenceUsers will automatically unsilence any users who
should no longer be silenced (silenced_till < now()). This made it so
silence_count - unsilence_count == 0 for any user who is not silenced,
which defeated the purpose of this TL3 requirement.
DEV: deprecate `invite.via_email` in favor of `invite.emailed_status`
This commit adds a new column `emailed_status` in `invites` table for
tracking email sending status.
0 - not required
1 - pending
2 - bulk pending
3 - sending
4 - sent
For normal email invites, invite record is created with emailed_status
set to 'pending'.
When bulk invites are sent invite record is created with emailed_status
set to 'bulk pending'.
For invites that generates link, invite record is created with
emailed_status set to 'not required'.
When invite email is in queue emailed_status is updated to 'sending'
Once the email is sent via `InviteEmail` job the invite emailed_status
is updated to 'sent'.
This is a low severity security fix because it requires a logged in
admin user to update a site setting via the API directly to an invalid
value.
The fix adds validation for the affected site settings, as well as a
secondary fix to prevent injection in the event of bad data somehow
already exists.
Context: https://meta.discourse.org/t/121589
This new setting option lets group owners message/mention large groups
without granting that privilege to all members.
Groups can now be marked as visible to "logged on users". All automatic groups (except `everyone`) are now visible to "logged on users", previously they were marked as public but suppressed in the group page for non-staff.
This allows you to temporarily disable components without having to remove them from a theme.
This feature is very handy when doing quick fix engineering.
Previously users were still allowed to create topic via API even if
uncategorized was disabled.
Not 100% happy with all this special casing, but I guess we have to do
something.
This also splits up a mega spec now that we have fab! into a more easy to
understand structure (I hope)
* Remove unused method
* Prefabricate user in category_user_spec.rb
* FIX: Remove notification_level from category_users unique indexes
* FIX: CategoryUser#batch_set wasn't updating pre-existing records
* Improve tests for CategoryUser#batch_set
* FIX: changed was being reported incorrectly
* DEV: Rewrote query to do a bulk insert
* DEV: remove unnecessary parentheses
We now treat any external_id of blank string (" " or " " or "", etc) or a
invalid word (none, nil, blank, null) - case insensitive - as invalid.
In this case the client will see "please contact admin" the logs will explain
the reason clearly.
- Correct create_category_definition to skip validations and use a
transaction, no longer able to create corrupt topics
- ensure_consistency now clears topic_id if pointing at deleted or missing
topic_id
- Stop creating category definition topics for uncategorized
You can now add javascript files under `/javascripts/*` in a theme, and they will be loaded as if they were included in core, or a plugin. If you give something the same name as a core/plugin file, it will be overridden. Support file extensions are `.js.es6`, `.hbs` and `.raw.hbs`.
This is an attempt to fix the flaky:
```
1) Jobs::Onceoff can run all once off jobs without errors
Failure/Error: self.locale_no_cache = value
I18n::InvalidLocale:
:bar is not a valid locale
# ./lib/freedom_patches/translate_accelerator.rb:193:in `locale='
# ./app/jobs/onceoff/clean_up_user_export_topics.rb:7:in `block in execute_onceoff'
# ./app/jobs/onceoff/clean_up_user_export_topics.rb:6:in `map'
# ./app/jobs/onceoff/clean_up_user_export_topics.rb:6:in `execute_onceoff'
# ./spec/integrity/onceoff_integrity_spec.rb:13:in `block (3 levels) in <main>'
# ./spec/integrity/onceoff_integrity_spec.rb:12:in `each'
# ./spec/integrity/onceoff_integrity_spec.rb:12:in `block (2 levels) in <main>'
```
This feature allows end users to "defer" topics by marking them unread
The functionality is default disabled. This also introduces the new site
setting default_other_enable_defer: to enable this by default on new user
accounts.
* FEATURE: detect theme errors and catch them
* Bump COMPILER_VERSION
* Feedback
* Override eslint no console for one line
* Can't use our ajax method
* remove emoji from translation file
The issue here was that, with prefabrication, bumped_at was being
persisted and then loaded and the DB was storing it with less precision
than the object state.
We were blocking user registrations with same username and password,
but allowing usernames to be changed to be same as password later.
Also disallow names to be the same as password.
There was a race condition when 2 invites existed for 1 user where in some
cases data from both invites would be used for the redeem. Depending on DB
ordering.
Fix is to delete duplicate invites earlier in the process prior to
`redeem_from_email` being called.
Before: 6:05
After: 5:42
Featuring topics for `list/categories` is a very expensive operation that
happened each time we created a topic. This introduces a test only bypass
This is a feature that used to be present in discourse-assign but is
much easier to implement in core. It also allows a topic to be assigned
without it claiming for review and vice versa and allows it to work with
category group reviewers.
We found score hard to understand. It is still there behind the scenes
for sorting purposes, but it is no longer shown.
You can now filter by minimum priority (low, med, high) instead of
score.
* Moved let to more appropriate scopes
* Refactored tests
It's confusing when let blocks in a parent context depend on other let
blocks from a child context.
* Moved fabrication to top level
* Removed unnecessary user fabrications
* Added a trust level 2 user at the top level
* Factored out category
* Made test use generic user
* Prefabricate topic
* Cut down redundant users
* Prefabricated more things
* Introduced fab!, a helper that creates database state for a group
It's almost identical to let_it_be, except:
1. It creates a new object for each test by default,
2. You can disable it using PREFABRICATION=0
This removes all uses of both `send` and `public_send` from consumers of
SiteSetting and instead introduces a `get` helper for dynamic lookup
This leads to much cleaner and safer code long term as we are always explicit
to test that a site setting is really there before sending an arbitrary
string to the class
It also removes a couple of risky stubs from the auth provider test
Hidden (staff-only) post actions are whisper posts with no content, that
are later transformed by the client into post actions (discourse-assign
uses this).
After careful analysis of large data-sets it became apparent that avg_time
had no impact whatsoever on "best of" topic scoring. Calculating avg_time
was a very costly operation especially on large databases.
We have some longer term plans of introducing other weighting that is read
time based into our scoring for "best of" and "top" topics, but in the
interim to stop a large amount of work that is not achieving any value we
are removing the jobs.
Column removal will follow once we decide on a new replacement metric.
`Upload#url` is more likely and can change from time to time. When it
does changes, we don't want to have to look through multiple tables to
ensure that the URLs are all up to date. Instead, we simply associate
uploads properly to `UserProfile` so that it does not have to replicate
the URLs in the table.
Minor fixes to add Rails 6 support to Discourse, we now will boot
with RAILS_MASTER=1, all specs pass
Only one tiny deprecation left
Largest change was the way ActiveModel:Errors changed interface a
bit but there is a simple backwards compat way of working it
This change automatically resizes icons for various purposes. Admins can now upload `logo` and `logo_small`, and everything else will be auto-generated. Specific icons can still be uploaded separately if required.
## Core
- Adds an SiteIconManager module which manages automatic resizing and fallback
- Icons are looked up in the OptimizedImage table at runtime, and then cached in Redis. If the resized version is missing for some reason, then most icons will fall back to the original files. Some icons (e.g. PWA Manifest) will return `nil` (because an incorrectly sized icon is worse than a missing icon).
- `SiteSetting.site_large_icon_url` will return the optimized version, including any fallback. `SiteSetting.large_icon` continues to return the upload object. This means that (almost) no changes are required in core/plugins to support this new system.
- Icons are resized whenever a relevant site setting is changed, and during post-deploy migrations
## Wizard
- Allows `requiresRefresh` wizard steps to reload data via AJAX instead of a full page reload
- Add placeholders to the **icons** step of the wizard, which automatically update from the "Square Logo"
- Various copy updates to support the changes
- Remove the "upload-time" resizing for `large_icon`. This is no longer required.
## Site Settings UX
- Move logo/icon settings under a new "Branding" tab
- Various copy changes to support the changes
- Adds placeholder support to the `image-uploader` component
- Automatically reloads site settings after saving. This allows setting placeholders to change based on changes to other settings
- Upload site settings will be assigned a placeholder if SiteIconManager `responds_to?` an icon of the same name
## Dashboard Warnings
- Remove PWA icon and PWA title warnings. Both are now handled automatically.
## Bonus
- Updated the sketch logos to use @awesomerobot's new high-res designs
This change both speeds up specs (less strings to allocate) and helps catch
cases where methods in Discourse are mutating inputs.
Overall we will be migrating everything to use #frozen_string_literal: true
it will take a while, but this is the first and safest move in this direction
If a tag group is set to only be visible to staff, and is restricted
to a category that is visible by everyone, the tags in the group were
being shown on the /tags page. They weren't visible anywhere else.
This commit fixes it so they don't show on the /tags page.
This is for backwards compatibility purposes. Even if `Upload#url` has a
format that we don't recognize, we should still return the upload object
as long as the upload record is present.
Martin Brennan
Mark VanLandingham
Martin Brennan
Krzysztof Kotlarek
Régis Hanol
Gerhard Schlager
David Taylor
Robin Ward
Roman Rizzi
Jeff Wong
Vinoth Kannan
Penar Musaraj
Bianca Nenciu
dependabot-preview[bot]
Sam Saffron
Neil Lalonde
Joffrey JAFFEUX
Vinoth Kannan
Dan Ungureanu
Blake Erickson
Michael Brown
Rafael dos Santos Silva
Daniel Waterworth
Mark VanLandingham
Osama Sayegh
Martin Brennan
Jarek Radosz
Guo Xiang Tan
Kyle Zhao
Arpit Jalan
Bianca Nenciu
Maja Komel
Natalia
Nicolas Sebastian Vidal