This commit handles the edge case where a draft is lost with no warnings if the user edits the title (or category/tags) of a topic while they're replying.to the same topic. Repro steps are as follows:
1. Start replying to a topic and type enough to get a draft saved.
2. Scroll up to the topic title and click the pencil icon next to the topic title, change the title, category and/or tags, and then save the changes.
3. Reload the page and you'll see that the draft is gone.
This happens because we only allow 1 draft per topic per user and when you edit the title of a topic that you're replying to, from the server perspective it'll look like as if you've submitted your reply so it will advance the draft sequence for the topic and delete the draft.
The fix in this commit makes `PostRevisor` skip advancing the draft sequence when a topic's title is edited using the pencil button next to the title.
Internal ticket: t60854.
Co-authored-by: Robin Ward <robin.ward@gmail.com>
Meta topic: https://meta.discourse.org/t/rtl-direction-is-broken-in-quotes/217639?u=osama.
Posts in Discourse are by default always rendered in the same direction as the rest of site, for example if the site is RTL, a post in that site is always rendered RTL even if it's made of an LTR language entirely. However, this behavior can be changed by enabling the `support mixed text direction` site setting which makes our posts rendering engine consider each "paragraph" in the post and apply an appropriate direction (using the `dir` attribute) on it based on its content/language.
I put paragraph in quotes because technically we only loop through the immediate children of the HTML element that contains the post cooked HTML and do this direction check on them. Most of the time the immediate children are actually paragraphs, but not always. The direction of an element is determined by checking its `textContent` property against a regular expression that checks all characters are RTL characters and based on the regular expression result the `dir` attribute is set on the element.
This technique doesn't work so well on quotes because they may contain multiple paragraphs which may be in different languages/directions. For example: if a site's language is Arabic (RTL language) and the `support mixed text direction` setting is enabled, regular paragraphs outside quotes are rendered as expected with the right direction depending on the paragraph's language. However, paragraphs within a quote are all (incorrectly) rendered in a single direction, LTR or RTL, regardless of whether they're of different languages/directions or not.
The reason for this is that when we're determining the direction for the quote, it's considered as one element and the direction is set on the whole quote. But for complex quotes that contain mixed paragraphs, we need to be more surgical and apply direction on individual paragraphs/elements within the quote.
This commit adds special handling for quotes to ensure that:
* the quote top bar (the avatar plus the chevron and arrow) always match the site direction
* each immediate paragraph (`<p>` elements) under `<blockquote>` in the quote gets a direction based on its content.
For before/after screenshots, see PR #16004.
This option will make it so the [quote] bbcode will always
include the HTML link to the quoted post, even if a topic_id
is not provided in the PrettyText#cook options. This is so
[quote] bbcode can be used in other places, like chat messages,
that always need the link and do not have an "off-topic" ID
to use.
The 'new' tab doesn't exist for anonymous users. Every 'new' topic also publishes a message on the `/latest` channel, so the blue banner at the top of the topic-list will still be functional
* DEV: remove duplicate code in button component template
* DEV: refactor is-loading state of d-button component
Before this change on initialisation `forceDisabled` is set `false` and then might change to `undefined` - depending on the use of the button component. This change ensures a boolean value for `forceDisabled`.
The added test works with and without the new change. The test is added as it represents the default use case for most buttons.
Previously we were publishing one messagebus message per user which was 'tracking' a topic. On large sites, this can easily be 1000+ messages. The important information in the message is common between all users, so we can manage with a single message on a shared channel, which will be much more efficient.
For user-specific values (notification_level and last_read_post_number), the JS app can infer values which are 'good enough'. Correct values will be loaded as soon as a topic-list containing the topic is visited.
This will only work under Ember CLI, and a small hack is required to make the Resolver work in development mode. In future, when we move to a more recent version of the Ember Resolver, this hack will not be required.
The use of a `/g` regex was causing some surprising, seemingly random, behavior. (https://stackoverflow.com/a/1520853/5913559)
There was also a known issue which would cause inconsistent class behavior when running the 'loading slider' theme component.
This commit takes the opportunity to refactor the component to remove the use of observers and remove the regex-based class parsing.
This commit moves _getMultilineContents and _applySurround into
TextareaTextManipulation, so other text area components using
that mixin can benefit from them (such as the chat composer).
It also creates a public function wrapper for many TextareaTextManipulation
functions that should not have underscore prefixes because they are
used outside the file. Will make follow-up PRs for each plugin/theme using
those functions then a final follow-up core PR to fix these up.
After leaving a group, it is trying to reload its member list. Previously, when the members_visibility_level attribute has a value of 2 or higher, it displayed an error popup since the can_see_members attribute was not updated.
2FA support in Discourse was added and grown gradually over the years: we first
added support for TOTP for logins, then we implemented backup codes, and last
but not least, security keys. 2FA usage was initially limited to logging in,
but it has been expanded and we now require 2FA for risky actions such as
adding a new admin to the site.
As a result of this gradual growth of the 2FA system, technical debt has
accumulated to the point where it has become difficult to require 2FA for more
actions. We now have 5 different 2FA UI implementations and each one has to
support all 3 2FA methods (TOTP, backup codes, and security keys) which makes
it difficult to maintain a consistent UX for these different implementations.
Moreover, there is a lot of repeated logic in the server-side code behind these
5 UI implementations which hinders maintainability even more.
This commit is the first step towards repaying the technical debt: it builds a
system that centralizes as much as possible of the 2FA server-side logic and
UI. The 2 main components of this system are:
1. A dedicated page for 2FA with support for all 3 methods.
2. A reusable server-side class that centralizes the 2FA logic (the
`SecondFactor::AuthManager` class).
From a top-level view, the 2FA flow in this new system looks like this:
1. User initiates an action that requires 2FA;
2. Server is aware that 2FA is required for this action, so it redirects the
user to the 2FA page if the user has a 2FA method, otherwise the action is
performed.
3. User submits the 2FA form on the page;
4. Server validates the 2FA and if it's successful, the action is performed and
the user is redirected to the previous page.
A more technically-detailed explanation/documentation of the new system is
available as a comment at the top of the `lib/second_factor/auth_manager.rb`
file. Please note that the details are not set in stone and will likely change
in the future, so please don't use the system in your plugins yet.
Since this is a new system that needs to be tested, we've decided to migrate
only the 2FA for adding a new admin to the new system at this time (in this
commit). Our plan is to gradually migrate the remaining 2FA implementations to
the new system.
For screenshots of the 2FA page, see PR #15377 on GitHub.
When parent category or grandparent category is muted, then category should be muted as well.
Still, it can be overridden by setting individual subcategory notification level.
CategoryUser record is not created, mute for subcategories is purely virtual.
This can happen if the topic to which a user is invited is in a private
category and the user was not invited to one of the groups that can see
that specific category.
This used to be a warning and this commit makes it an error.
This was deprecated in Discourse 2.4, but no end version was put on the deprecation. Many plugins/themes are still using it. This commit restores it under ember-cli so that it does not block the Ember CLI rollout, and can be removed in a future commit.
To make this possible in development mode, the `sourceURL=` implementation needs to include something plugin-specific. This has no effect on production.
The asset version is bumped in order to trigger a re-compilation of plugin JS assets.
The old choose-topic component did not have the same style as the rest
of the create invite modal and was not very suitable to use in the modal
because it introduced the search results in modal's body.
The new topic-chooser is built using select-kit and provides a more
polished user experience.
This makes a small improvement to 'cold cache' ember-cli build times, and a large improvement to 'warm cache' build times
The ember-auto-import update means that vendor is now split into multiple files for efficiency. These are named `chunk.*`, and should be included immediately after the `vendor.js` file. This commit also updates the rails app to render script tags for these chunks.
This change was previously merged, and caused memory-related errors on RAM-constrained machines. This was because Webpack 5 switches from multiple worker processes to a single multi-threaded process. This meant that it was hitting node's default heap size limit (~500mb on a 1GB RAM server). Discourse's standard install procedure recommends adding 2GB swap to 1GB-RAM machines, so we can afford to override's Node's default via the `--max-old-space-size` flag.
- Update UI to improve contrast
- Make it clear that the message is only shown to administrators
- Add theme name and id to the console output
- Parse the error backtrace to identify the theme-id for post-decoration errors
- Improve console output to include the theme name / URL
- Add `?safe_mode=no_custom` to the admin panel link, so that it will work even if the theme is causing the site to break
The chat quoting mechanism will need to be able to generate
markdown for all kinds of uploads. The UploadMarkdown class
was missing generation for video and audio uploads. This
commit adds that in, and also expands the server-side regex
recognition of FileHelper types to match those in uploads.js,
and adds a spec for UploadMarkdown
Another use case for focusComposer() is if the user is
already inside a topic but another component (such as the
floating chat window) needs to open the composer. This
commit also fixes the appendText option to only prepend
2 new lines if there is text before the text to be appended.
Follow up 7850ee318f
- Update UI to improve contrast
- Make it clear that the message is only shown to administrators
- Add theme name and id to the console output
- Parse the error backtrace to identify the theme-id for post-decoration errors
- Improve console output to include the theme name / URL
- Add `?safe_mode=no_custom` to the admin panel link, so that it will work even if the theme is causing the site to break
accept HTML attribute is not fully supported on iOS yet and can contain
only MIME types. This changes the input to allow all files and the
extension check is performed later in JavaScript.
Instead of relaying on /timings request, we should cache last read post number. That should protect from having incorrect unread counter when going back to topic list.
This additional cache is very temporary as once /timings request is finished, serializer will have a correct result.
Simplified flow is:
1. Store in cache information about last seen post number before /timings request is sent
2. When getting back to topic list compare value of last seen post number returned by /latest request and information in cache. If cache number is higher, than use it instead of information returned by /latest. In addition delete cache item as there is high chance that `/timings` request already finished.
3. Optionally, delete cache when timings request is done and topic list was not yet visited.
Keeping cache reasonably small should not affect performance.
TopicTrackingState should correctly set filterCategory and filterTag for all different configurations.
When filterTag exists and new_topic message arrives, it ensures that filterTag is included in payload tags
If filterTag is part of payload tags, message that new topics are available is displayed and after click, new topics are included in the list.
Allows to write custom code blocks:
```
```mermaid height=200,foo=bar
test
```
```
Which will then get converted to:
```
<pre data-code-wrap="mermaid" data-code-height="200" data-code-foo="bar">
<code class="lang-nohighlight">
test
</code>
</pre>
```
We need this in other places, this commit moves clipboardCopy
to the utilities.js lib. Had to remove use of Promise as well because
lib/utilities cannot import it, otherwise it will cause a mini racer error.
This commit adds a new helpful function to the composer controller
which can be used to focus the composer and insert text, regardless
of whether the consumer knows whether the composer is open or has
a draft. This is good for cases where an action needs to copy text
to the composer or open it with text after navigating to a URL.
The inspiration for this addition is the discourse-chat plugin,
which needs to be able to copy quoted markdown from the chat
and insert it into the composer, and unlike in the topic controller
we have no idea of the state of the composer from chat.
Under ember-cli, we rely on the `ember-export-application-global` addon to make `window.Discourse` available. This happens in an initializer. Previously this inititalizer would run after `auto-load-modules`, and so any widget/helper modules would not be able to access it. This commit sets some `after` parameters on the `auto-load-modules` and `inject-objects` initializers to ensure that `export-application-global` is run first.
This reverts commit f4c6a61855 and a8325c9016
This update of ember-auto-import and webpack causes significantly higher memory use during rebuilds. This made ember-cli totally unusable on 1GB RAM / 2GB swap environments. We don't have a specific need for this upgrade right now, so reverting for now.
In the commit d8bf2810ff we hoisted
the userOptionFields array to a module-level variable, but kept
the code inside save() the same. This causes an issue where if
save() is called twice on the same user with some array of user
option fields, the userOptionFields array is mutated, which means
the second save is likely not saving the fields intended.
This commit fixes the issue by not mutating the array. We cannot
change them into consts though, because we have an API to add more
items to the array.
This commit allows group SMTP emails to be sent with a
different from email address that has been set up as an
alias in the email provider. Emails from the alias will
be grouped correctly using Message-IDs in the mail client,
and replies to the alias go into the correct group inbox.
Ember tests follows a convention where test files have a postfix of
`-test.js`. This ensures that any files in the tests folder which
follows this pattern is included.
When uploading an image, we change the uploading placeholder several times. Every time, we correct the position of the cursor after replacing. But we schedule repositioning of cursor to the afterRender queue in Ember Run Loop. As a result, sometimes we replace the placeholder several times but correct the cursor position only once at the end.
It just cannot work correctly with scheduling, we'll always be dealing with cumulative error. Removing scheduling fixes the problem.
Sadly, I cannot make the test work, I skipped it for now, going to give it another try later.
This makes a small improvement to 'cold cache' ember-cli build times, and a large improvement to 'warm cache' build times
The ember-auto-import update means that vendor is now split into multiple files for efficiency. These are named `chunk.*`, and should be included immediately after the `vendor.js` file. This commit also updates the rails app to render script tags for these chunks
This commit adds a requestCustomMarkdownCookFunction function
to the `helper` that is provided to custom markdown rules
via their `setup` function.
The way this works is that once the default markdown engine that
we use for cooking posts has been set up, we loop through all
of the callbacks registered by `requestCustomMarkdownCookFunction`
and call `_buildCustomMarkdownCookFunction`. This creates
a new markdown engine using many of the same settings as the
default one, but will allow for the following options to be
changed by the markdown rule requesting the custom function:
* featuresOverride - The markdown-it features to allow for the engine
* markdownItRules - The markdown-it rules to allow for the engine
After this engine is set up a render function which renders + sanitizes
the output is returned for use by the markdown rule.
The use case for this API is mainly for block BBCode markdown rules
which want to render their content with a limited subset of the
markdown features/rules. Our initial use case for this is chat message
quoting.
This commit also does some minor refactoring of discourse-markdown-it
to accommodate this new engine building.
When changing to uppy for file uploads we forgot to add
these conditions to the paste event from 9c96511ec4
Basically, if you are pasting more than just a file (e.g. text,
html, rtf), then we should not handle the file and upload it, and
instead just paste in the text. This causes issues with spreadsheet
tools, that will copy the text representation and also an image
representation of cells to the user's clipboard.
This also moves the paste event for composer-upload-uppy to the
element found by the `editorClass` property, so it shares the paste
event with d-editor (via TextareaTextManipulation), which makes testing
this possible as the ember paste bindings are not picked up unless both
paste events are on the same element.
Adds up and down buttons next to the inputs of value lists when there is more than 1 item present. This helps to re-order the items in the value lists if necessary.
- Limit bulk re-invite to 1 time per day
- Move bulk invite by csv behind a site setting (hidden by default)
- Bump invite expiry from 30 -> 90 days
## Updates to rate_limiter
When limiting reinvites I found that **staff** are never limited in any way. So I updated the **rate_limiter** model to allow for a few things:
- add an optional param of `staff_limit`, which (when included and passed values, and the user passes `.staff?`) will override the default `max` & `secs` values and apply them to the user.
- in the case you **do** pass values to `staff_limit` but the user **does not** pass `staff?` the standard `max` & `secs` values will be applied to the user.
This should give us enough flexibility to
1. continue to apply a strict rate limit to a standard user
2. but also apply a secondary (less strict) limit to staff
In our legacy environment, Ember RFC176 shims are included in `discourse-loader.js` which is part of the `vendor.js` bundle. This meant that the module shims were available as soon as the vendor.js asset was loaded.
Under Ember CLI, we were defining these shims in `discourse-boot.js`. This is loaded by the browser much later, and meant that the shims were not available to themes/plugins that call `require()` before Discourse has booted. This was causing errors under some circumstances.
This commit refactors the Ember CLI implementation so that the shims are included in the vendor.js bundle. This is done via an addon which leans on the ember-rfc176-data NPM package. This will ensure we have all the definitions, without the need for manual copy/paste.
In our legacy environment, Ember RFC176 shims are included in `discourse-loader.js` which is part of the `vendor.js` bundle. This meant that the module shims were available as soon as the vendor.js asset was loaded.
Under Ember CLI, we were defining these shims in `discourse-boot.js`. This is loaded by the browser much later, and meant that the shims were not available to themes/plugins that call `require()` before Discourse has booted. This was causing errors under some circumstances.
This commit refactors the Ember CLI implementation so that the shims are included in the vendor.js bundle. This is done via an addon which leans on the ember-rfc176-data NPM package. This will ensure we have all the definitions, without the need for manual copy/paste.
Previously, `resetSite()` would immediately generate a new `Site` instance, and run all the initialization logic within the model. This included initializing Category objects.
This was problematic because `resetSite()` is called before any initializers have been run. That means that any modifications to the Site or Category classes would not have any effect on the already-initialized Site/Category instances.
This commit makes two main changes so so that the test environment is more production-like:
1. Update `resetSite` so that it simply stores the new data in the PreloadStore, and destroys the old Site instance. Initialization of a new site instance happens 'just in time' (normally during the `inject-discourse-objects` initializer)
2. Update the `helperContext` in tests to use getters. This avoids the need to look up `Site.current()` before initializers have run
It also makes a minor adjustment to one test which was relying on a side-effect of the previous behavior.
This should resolve the failing tests for discourse-category-expert under Ember-CLI: https://github.com/discourse/discourse-category-experts/pull/69
This also switches to using the NPM package for better build stability. And adds a clearer label in the alert that is displayed to show your current timezone (when changing timezones).
* Some are no longer flaky or easily fixed
* Some are out of date or test things we can't do accurately (scroll
position) and are removed.
* Unwinds some uppy tests and makes sure all promises and runloops are
resolved.
Everything has been run in legacy/ember cli multiple times to ensure no
obvious suite regressions.
When the record is not saved, we should display a proper message.
One potential reason can be plugins for example discourse-calendar is specifying that only first post can contain event
We don't need raw to decide if we can fast edit or not, we will fetch the raw later when we do the replacement, but this step can be done directly from innerHTML.
Sometimes plugins need to have additional data or options available
when rendering custom markdown features/rules that are not available
on the default opts.discourse object. These additional options should
be namespaced to the plugin adding them.
```
Site.markdown_additional_options["chat"] = { limited_pretty_text_markdown_rules: [] }
```
These are passed down to markdown rules on opts.discourse.additionalOptions.
The main motivation for adding this is the chat plugin, which currently stores
chat_pretty_text_features and chat_pretty_text_markdown_rules on
the Site object via additions to the serializer, and the Site object is
not accessible to import via markdown rules (either through
Site.current() or through container.lookup). So, to have this working
for both front + backend code, we need to attach these additional options
from the Site object onto the markdown options object.
This reverts commit f43bba8d59.
Adding randomness has introduced a lot of flakiness in our ember-cli tests. We should fix those issues at the source. However, given the upcoming stable release, this randomness has been reverted so that the stable release includes a stable test suite. Having a stable test suite on stable will make backporting future commits much easier.
When staff visits the user profile of another user, the `email` field
in the model is empty. In this case, staff cannot send the reset email
password because nothing is passed in the `login` field.
This commit changes the behavior for staff users to allow resetting
password by username instead.
The topic ID portion of the topic URL is optional in Discourse as long as the topic slug is unique across the site. If you navigate to a topic without the ID in the URL, Discourse will redirect you to the canonical version of the URL that includes the ID.
However, we have a now regression where the client app doesn't correctly handle ID-less topic URLs displays an error message when the user clicks on such URL. The regression was introduced b537d591b3 when we switched from `DiscourseURL.routeTo` to using Ember's router to perform the redirecting to the canonical version of the URL, but the problem is that the canonical version comes from the server and it contains the hostname which the Ember router doesn't understand because it expects a relative URL.
This PR fixes the problem by constructing a relative URL that contains the topic slug and ID and passing that to the Ember route.
Removes one layer of indirection in the tests. `emoji-uploader`'s
`uploadDone` can call the test handler directly without going through
an additional action method.
It does this by creating a new initializer that runs every time the app
is booted to track the current test. Then after each test, we see if the
app needs to be torn down.
This creates a helper function with all the cleanup tasks we need to do
after tests, then makes sure to call it after tests that previously
weren't.
This fixes a lot of flakey tests.
Testing this is kinda complicated ATM (especially mobile template with hbr) , this is a component we should definitely aim to test very extensively when we move away from hbr templates.
The UI used to request a password reset by username when the user was
logged in. This did not work when hide_email_already_taken site setting
was enabled, which disables the lookup-by-username functionality.
This commit also introduces a check to ensure that the parameter is an
email when hide_email_already_taken is enabled as the single allowed
type is email (no usernames are allowed).
* FIX: Mark invites flash messages as HTML safe.
This change should be safe as all user inputs included in the errors are sanitized before sending it back to the client.
Context: https://meta.discourse.org/t/html-tags-are-explicit-after-latest-update/214220
* If somebody adds a new error message that includes user input and doesn't sanitize it, using html-safe suddenly becomes unsafe again. As an extra layer of protection, we make the client sanitize the error message received from the backend.
* Escape user input instead of sanitizing
If themes/plugins introduce a sidebar on the left of the screen, the quote button would sometimes be positioned underneath. This commit ensures that the positioning logic keeps the floating buttons within the width of `.topic-area`
Some safari-specific logic was inadvertently removed during the refactoring in b2d45c59. This commit restores it. The logic requires some state, so the getRangeBoundaryRect helper has to be moved back into the Component class. The functional change in this commit is the three lines enclosed by `if (this.capabilities.isSafari) {`.
As part of /t/10298, try to remove the first flaky test in the list.
One finding is that the /t/280 topic has a very long post stream, so that may have caused some delay when rendering the topic. One way is to wait for the first expected element to load, but that doesn't scale well given how many waits we will need to add. So I chose to render a shorter topic instead.
Previously we were adding `/assets/discourse/tests/core_plugin_tests.js` to the test html all the time. This works in development mode, but fails silently when using testem via the `ember test` CLI, because there is no proxy running.
This commit makes a few changes to fix this, and make it more useful:
- Only renders the plugin `<script>` when in development mode, or when `LOAD_PLUGINS=1` (matching core's behavior)
- Only loads plugin translations based on the same logic
- When running via testem, and the above conditions are met, testem is configured to proxy `core_plugin_tests.js` through to a rails server. (port based on the `UNICORN_PORT` env variable)
- Adds a descriptive error if the plugin `<script>` fails to load. This can happen if the rails server hasn't been started
- Updates the logic for testem browsers. Ember CLI always launches testem in "CI" mode, and we don't really want 3 browsers opening by default. Our CI explicitly specifies the 3 browsers at runtime
This expands cbf99f48 to apply to all mobile devices. It removes the old mobile positioning logic entirely, refactors the new system a little for robustness and readability, and removes some JQuery.
On Andoid, we also need to avoid the start selection handle. Therefore the logic for locating selection boundaries is abstracted into a function for easier re-use.
Previously the picker would attempt to avoid positioning itself hover textarea and could in limited width screen end up being out of screen.
This behavior would be even more probable on full screen mode where the textarea takes a lot of space.
* The current evaluation of uppy promises is causing the entire suite to fail
if there's an exception. Instead of using `done` we use the simpler
pattern of returning the promise from the test to force Qunit to wait
until it's completed.
* In some browser conditions `/last.json` will be requested depending on the
particular scroll / performance. This causes the tests not to fail if
that is the case.
* Keyboard shortcuts were not being fully cleared between runs,
resulting in tests failures.
This commit adds a hover effect for drag and drop in
the admin emoji uploader. It also changes the "Add New
Emoji" button to open the file selector; previously it
was useless because it was disabled unless a name was
entered (which is not even a requirement for the emoji)
and also it didn't actually do anything on click even
if it wasn't disabled.
Now we have a way of adding files without having to drag
and drop them, which is nice.
Also in this PR, there was no indication before that the upload was
complete apart from the button becoming enabled again.
This commit adds the highlight class to the emoji list
and removes it once the highlight fade animation is done,
like we do for new posts.
Tapping within ~50px of the selection end handle on iOS doesn't trigger a click event. This commit ensures that our quote buttons are always at least 50px away from the end handle. It will try 4 positions in order of preference:
1. The original position
2. 50px to the left of the handle
3. 50px to the right of the handle
4. 50px below the handle, centered on the handle
Follow up to 48f70dcd5f. The group
_appeared_ to be saved in the UI until a refresh when it became
clear that the group wasn't actually sent to the DB. This is because
of the way the per-file data was being set with a computed property.
This commit fixes the computed property by changing it to a regular
function and also makes sure the name resetting after the first upload
in multiple uploads works too.
When uploading multiple emoji in Admin/Customize/Emojis
with an emoji Group selected, the group was cleared between
each file uploaded, making bulk uploading of emojis a chore
if anything but the default group was needed.
This commit fixes the issue, introduces tests for emoji-uploader,
and also adds `add-files` appEvents for uppy-upload mixin, same
as the composer-upload-uppy mixin, for interop with tests and so
we don't have to rely on a file upload element's change event.
This reverts commit 2c7906999a.
The changes break some things in local development (putting JS files
into minified files, not allowing debugger, and others)
This is a workaround a behavior change in Chromium v97.
The following text was sent to the blink-dev mailing list:
> This change broke a SingleSignOn login on the FOSS software Discourse. We have a flow like:
>
> 1. User visits forum.siteA.com, click login
> 2. Gets redirected to idp.siteB.com
> 3. Fills login details
> 4. Gets redirected to forum.siteA.com/session/sso_login?parameters
> 5. Gets redirected to forum.siteA.com/homepage
>
> On step 4, the response includes a `set-cookie` header, with proper `HttpOnly; SameSite=Lax; Secure `and set. But if there is an active service worker, the login will fail as that cookie will be rejected by Chromium due to SameSite rules now.
>
> t=2971 [st=258] COOKIE_INCLUSION_STATUS
> --> domain = "forum.siteA.com"
> --> name = "_t"
> --> operation = "store"
> --> path = "/"
> --> status = "EXCLUDE_SAMESITE_LAX, DO_NOT_WARN"
>
> The service worker is a vanilla WorkboxJS service worker that intercepts all GETs with the "Network First" strategy.
>
> Disabling the service worker or using Firefox results in a successful login. There is no warning in either DevTools network tab nor the console that the cookie was rejected.
>
> Chrome 96: login works
> Chrome 97: login does not work
> Chrome 98: login does not work
>
> Is this expected behavior? Even if the request `GET forum.siteA.com` was initiated because of a redirect from a different domain, is it expected that Chrome will silently drop same site cookies from forum.siteA.com?
Currently when pressing Shift key and hitting Reply button the user
stays on the post they are on and does not get navigated to newly
created topic/PM/reply. This is fine for replies but creates confusion
when composing a new topic/PM.
This commits makes it such that pressing Shift key and Reply button
(or ctrl-shift-enter / cmd-shift-enter) works only for replies and not
for new topic/PM. The user will always be navigated to new topic/PM.
This means that our DiscourseURL logic will work consistently in tests, where `window.location` doesn't get updated.
To make it work properly, our `replaceState` implementation needed to be updated so that it writes the new URL to Ember's router, rather than bypassing the router and going straight to the `location` API.
A couple of tests needed updating following this fix:
- the composer-test was asserting that the new reply should be missing from the DOM... when really it **should** be in the DOM, and this fix to the test environment makes it so
- the topic-test was making a fake topic fixture based on the data from a topic with a different id. This was causing the topic route to get confused, and 'fix' the currentURL. This commit updates it to use a fixture with consistent data.
This commit also removes the feature detection of `window.history`. It's feature-detected within `discourse-location`. Plus, we don't support any browsers without it.
Previously only `<div>one top element</div>` was allowed because we use `firstChild` instead of `children`.
We also want `<div>one</div><div>two</div>` to work with this method.
This reverts commit ea84a82f77.
This is causing problems with `/theme-qunit` on legacy, non-ember-cli production sites. Reverting while we work on a fix
This is quite complex as it means that in production we have to build
Ember CLI test files and allow them to be used by our Rails application.
There is a fair bit of glue we can remove in the future once we move to
Ember CLI completely.
- Update the TOPIC_URL_REGEXP in `lib/url` so that `navigatedToPost` doesn't attempt to handle slug-less URLs. Slugs must contain at least one non-numeric character, so we can use that fact to make the regex more specific. We want slug-less URLs to be routed as a normal Ember transition, so that `topic-by-slug-or-id` can catch them and re-write the URL to include the slug.
- Update the `topic-by-slug-or-id` afterModel to ensure that the Ember router is used to handle the redirect, rather than DiscourseURL. This guarantees that it will function as a redirect (DiscourseURL.routeTo sometimes bypasses the router). This solves the history problem which was worked-around in 27211ee7bb.
- Update routes/topic to recover from aborted transitions gracefully. This means that following an aborted transition, the browser URL continues to be updated with post numbers as the user scrolls down the page.
An admin could search for all screened ip addresses in a block by
using wildcards. 192.168.* returned all IPs in range 192.168.0.0/16.
This feature allows admins to search for a single IP address in all
screened IP blocks. 192.168.0.1 returns all IP blocks that match it,
for example 192.168.0.0/16.
* FEATURE: Remove roll up button for screened IPs
* FIX: Match more specific screened IP address first
The new warnings cover more cases and more accurate. Most of the
warnings will be visible only to staff members because otherwise they
would leak information about user's preferences.
This commit extends the options which can be passed to
`PrettyText.markdown` so that which Markdown-it rules and Discourse
Markdown plugins to be used when rendering a text can be customizable.
Currently, this extension is mainly used by plugins.
…after you re-open the modal or select another emoji.
Reason:
Even the most used emoji would be knocked off the list after a while, if you use any emoji outside the recent. Consider the sequence:
✅, 😃, ✅ (from recent), 😀, ✅ (from recent), 😛, ✅ (from recent), 😎, ✅ (from recent), and so on
With the previous logic, the check mark emoji would leave the list, even though it used constantly and (and the time of removal) would the the second most recent used emoji.
---
It doesn't update the list when you use the recent list so that you can click an emoji repeatedly and it doesn't shift from under your mouse cursor.
The app's wrapper element ID is different in tests. `app.rootElement` allows us to consistently obtain the selector in the initializer, so it works correctly regardless of the app's configuration.
The test environment will wait for all timers to settle before continuing. These timers were causing all tests involving `/t/*` routes to spend 500ms doing nothing.
Fun fact: we load the topic route 214 times during the core test suite. That means that this commit saves a total of around 107s across the whole suite. On my machine, that's a 30% improvement in runtime.
Modern Ember only sets up a container when the ApplicationInstance is booted. We have legacy code which relies on having access to a container before boot (e.g. during pre-initializers).
In production we run with the default `autoboot` flag, which triggers Ember's internal `_globalsMode` flag, which sets up an ApplicationInstance immediately when an Application is initialized (via the `_buildDeprecatedInstance` method).
In tests, we worked around the problem by creating a fresh container, and placing a reference to it under `Discourse.__container__`.
HOWEVER, Ember was still creating a Container instance for each ApplicationInstance to use internally, and make available to EmberObjects via injection. The `Discourse.__container__` instance we created was barely used at all.
Having two different Container instances in play could cause some weird issues. For example, I noticed the problem because the `appEvents` instance held by DiscourseURL was different to the `appEvents` instance held by all the Ember components in our app. This meant that events triggered by DiscourseURL were not picked up by components in test mode.
This commit makes the hack more robust by ensuring that Ember re-uses the Container instance which we created pre-boot. This means we only have one Container instance in play, and makes `appEvents` work reliably across all parts of the app. It also adds detailed comments describing the hack, to help future travelers.
Hopefully in future we can remove this hack entirely, but it will require significant refactoring to our initialization process in Core and Plugins.
The mapping-router and map-routes initializer are updated to avoid the need for `container.lookup` during teardown. This isn't allowed under modern Ember, but was previously working for us because the pre-initializer was using the 'fake' container which was not ember-managed.
Migrate deprecated decorateCooked to decorateCookedElement for audio cloak-prevention.
This might give a minimal performance boost: running audio cloak-prevention for 20 (non-audio) posts takes 1 ms and not 15 ms.
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
It was impossible to select the 'all' filter for categories that have
the default list filter set to 'no subcategories'. This happens because
'/all' was not appended to the URL and in the absence of any list filter
('all' or 'none'), the default list filter ('none') was automatically
selected.
Before 6e0e6014, the flow looked something like:
1. `discovery/topics` controller (which extends `discovery` controller) `afterRefresh()` calls `.send("loadingComplete")`
2. Bubbles to [`discovery` route](554ff07786/app/assets/javascripts/discourse/app/routes/discovery.js (L58))
3. Discovery route calls `controllerFor('discovery').loadingComplete()`. `loading` is set false, and the spinner disappears
Now that `discovery/topics` defines `loadingComplete` as an action, the `discovery/topics` controller runs its own `loadingComplete` handler logic in step 1, and the action does not bubble any further.
This commit adds action overrides in `discovery/topics`, so that the new actions only apply to the main `discovery` controller. The need for this does suggest some more radical refactoring is required, but these are very critical routes, and we are very close to a major release.
This commit should be a no-op for all existing core outlets. Outlets which are introduced by themes/plugins may see a change in behavior, and should follow the steps below if they want to maintain their previous behavior.
`tagName="" connectorTagName=""` is almost always the correct choice for plugin outlets. 40eba8cd introduced a `noTags=true` shortcut which achieved this, and left a comment saying it should be the future default. This commit does exactly that. To avoid any breaking changes for plugins, all existing plugin outlets have been reviewed and adjusted by following this logic:
1) If `noTags=true`, remove the `noTags` parameter, and do not complete any further steps
2) If `tagName` is not specified, set `tagName="span"` (the previous default)
3) If `connectorTagName` is not specified, set `selectorTagName="div"` (the previous default)
4) If `tagName=""`, remove it
5) If `connectorTagName=""`, remove it
The updates were accomplished with the help of a ruby script:
```ruby
def removeAttr(tag, attribute)
tag = tag.sub /\s#{attribute}="?\w*"? /, " "
tag = tag.sub /\s#{attribute}="?\w*"?}}/, "}}"
tag = tag.sub /^\s*#{attribute}="?\w*"?\n/, ""
tag
end
files = Dir.glob("app/assets/javascripts/**/*.hbs")
puts "Checking #{files.count} files..."
files.each do |f|
content = File.read(f)
count = 0
edits = 0
content.gsub!(/{{\s*plugin-outlet.*?}}/m) do |match|
count += 1
result = match
noTags = result.include?("noTags=true")
tagName = result[/tagName="(\w*)"/, 1]
connectorTagName = result[/connectorTagName="(\w*)"/, 1]
if noTags
result = removeAttr(result, "noTags")
else
if connectorTagName == ""
result = removeAttr(result, "connectorTagName")
elsif connectorTagName.nil?
result = result.sub(/name="[\w-]+"/) { |m| "#{m} connectorTagName=\"div\"" }
end
if tagName == ""
result = removeAttr(result, "tagName")
elsif tagName.nil?
result = result.sub(/name="[\w-]+"/) { |m| "#{m} tagName=\"span\"" }
end
end
edits += 1 if match != result
result
end
puts "#{count} outlets, #{edits} edited -> #{f}"
File.write(f, content)
end
```
This workaround was introduced before we had the ability to render components with no wrapper element. Now we can pass `tagName=""` to `plugin-outlet`.
da6edc1 introduced the `lookupView` method, which initialized a fresh resolver, and used it to directly look up raw-views (with no caching). This worked well, but was not a clean solution. It required initializing an entirely new resolver, and did not have any caching.
This commit updates the `helperContext` to include access to the registry, and uses it to perform raw-view lookups. As well as re-using the registry, this also means we're making use of the resolver's built-in cache.
I haven't been able to measure any noticeable performance impact from this change, but there is certainly less work being done, so it may be beneficial on older devices.
Co-authored-by: Ayke Halder <rr-it@users.noreply.github.com>
If a theme/plugin raises an error while decorating post content, the decorator will be skipped, and the error reported on the console. Additionally, administrators will be shown a red warning at the top of the screen.
This commit refactors and re-uses some of the logic from the theme-initializer-error-reporting logic. In future, new error reports can be added by doing something like:
```
document.dispatchEvent(
new CustomEvent("discourse-error", {
detail: { messageKey: "some.translation.key", error },
})
);
```
- switches to a raster image QR code so it can be long-pressed (or right
clicked) and added to iCloud keychain
- adds `autocomplete="one-time-code"` to the 2FA input for better
discoverability
This commit adds a check that runs regularly as per
2d68e5d942 which tests the
credentials of groups with SMTP or IMAP enabled. If any issues
are found with those credentials a high priority problem is added to the
admin dashboard.
This commit also formats the admin dashboard differently if
there are high priority problems, bringing them to the top of
the list and highlighting them.
The problem will be cleared if the issue is fixed before the next
problem check, or if the group's settings are updated with a valid
credential.
Meta topic: https://meta.discourse.org/t/cant-pin-unpin-topic-from-the-title/213444?u=osama.
I know there is an inconsistency between the category of the linked topic (#bug) and the title prefix of this PR, but I really couldn't find anything in the code base that suggested this ever worked before, so I'm categorizing this PR as a feature.
Running in production mode is useful when doing performance-sensitive work.
- Set the `exportApplicationGlobal` flag, so we get the `Discourse` global in production mode. It defaults to only adding the global in development mode. Note that, when generating ember-cli assets via rails, we set this in `ApplicationHelper#discourse_config_environment`.
- Disable SRI - Ember CLI adds this to index.html when in production mode. We don't use SRI in production, so disable here to match.
- Refactor the `AssetRev` logic in `ember-cli-build.js`, so that our custom bundle hashes are find/replaced into index.html. Without this change, our custom bundles (e.g. `start-discourse.js`) remain without their hash in `index.html`, and do not function.
I have confirmed that the only diff in the `/dist` out following this change is to the `index.html` file. All other filenames and contents remain identical.
Centralizes calculations in a helper under the site header component.
This also reverts a small CSS change to the composer: since ac79c5ef,
the composer height was not including the grippie, which means that the
composer height was off by 11 pixels, and the topic progress widget was
sometimes being displayed cut off by 11 pixels.
I plan to use this in an upcoming discourse-reactions PR, where I want to like a post without notifying the user, so I can instead create a reaction notification.
Additionally, we decouple the a11y attributes from the icon itself, which will let us extend the widget's icon without losing them.
A follow-up to #15117 and #15141. Applies the previous changes to PM-specific fields, makes the preview area take the all the available height of the composer, and unifies more spacing between composer elements.
The new draft sequence is returned after the draft is saved and usually
it is the old draft sequence plus one and this way the new draft
sequence can be predicted.
Sometimes drafts are saved at odd times or the request is slower than
usual which can create a race condition. This prediction can fix this
problem.
This commit removes jQuery file uploader from Discourse,
completing the transition to Uppy. The image-uploader
and UploadMixin components are also removed in this commit
as they have already been replaced and are the only things
using jQuery file upload.
.-'~~~`-.
.' `.
| R I P |
| jquery |
| file |
| upload |
| |
\\| 2013-2021 |//
-----------------
Now that d5e380e5c1 has been
committed there is nothing in the codebase that uses either
resumable.js or the old backup-uploader component.
R.I.P resumable.js
Occasionally there will be a misconfigured CORS rule or a different
network failure when loading one of the media optimization WASM scripts.
This commit handles load failures and sends a new installFailed message
from the service worker, so that we don't error and hold up the rest
of the uploads if this occurs; the worker will just not process anything
and will keep trying to install itself with subsequent uploads until it succeeds.
This commit also removes the redundant useUppy variable in the worker
this should have been removed a while ago in f70e6c302f
This commit removes the enable_experimental_backup_uploader site
setting and the flags in backups-index.hbs to make the uppy
backup uploader the main one from now on.
A follow-up commit will delete the old backup uploader code and
also remove resumable.js from the project.
* FEATURE: hide_email_address_taken forces use of email in forgot password form
This strengthens this site setting which is meant to be used to harden sites
that are experiencing abuse on forgot password routes.
Previously we would only deny letting people know if forgot password worked on not
New change also bans usage of username for forgot password when enabled
This commit introduces scheduled problem checks for the admin dashboard, which are long running or otherwise cumbersome problem checks that will be run every 10 minutes rather than every time the dashboard is loaded. If these scheduled checks add a problem, the problem will remain until it is cleared or until the scheduled job runs again.
An example of a check that should be scheduled is validating credentials against an external provider.
This commit also introduces the concept of a `priority` to the problems generated by `AdminDashboardData` and the scheduled checks. This is `low` by default, and can be set to `high`, but this commit does not change any part of the UI with this information, only adds a CSS class.
I will be making a follow up PR to check group SMTP credentials.
Discourse sent only translation overrides for the current language to the client instead of sending overrides from fallback locales as well. This especially impacted en_GB -> en since most overrides would be done in English instead of English (UK).
This also adds lots of tests for previously untested code.
There's a small caveat: The client currently doesn't handle fallback locales for MessageFormat strings. That is why overrides for those strings always have a higher priority than regular translations. So, as an example, the lookup order for MessageFormat strings in German is:
1. override for de
2. override for en
3. value from de
4. value from en
* Remove _calculateTopOffset entirely
* Show group card with animated loading state
Showing the animated loading state before rending the actual content prevents an
awkward scroll position jump when displaying this card.
This mimics the behaviour of the user card (which uses the same `CardContentsBase` mixin).
* Fix two user card issues
1. A JS console error (with no consequences) when clicking a group mention
2. User cards weren't being loaded from the header (for example, for PMs)
Co-authored-by: Penar Musaraj <pmusaraj@gmail.com>
If the Ember OnError validation test is added, it breaks the "no tests were run" detection (since at least 1 test is always run). This is particularly important when running tests scoped to a single plugin, because there is no indication that you have typo'd the `qunit_single_plugin` query parameter.
This is so the target element for file drag + drop is
not always just this.element for the component, and
provides a way to hook into onDragOver and onDragLeave.
By default also adds a .uppy-is-drag-over class to the target
element.
In the composer, we already only allow for S3 multipart uploads
if enable_direct_s3_uploads is true, so in the backups uploader
that is based on Uppy we want to do the same thing. In future
if self-hosters need some way to not use S3 multipart in these
scenarios for whatever reason we can revisit this then (which
should be as simple as adding a enable_multipart_s3_uploads site
setting).
We cannot use any of the uppy mixins or core code, because
the code there is not shared with the wizard, and to move
it all to discourse-common would be a task almost equal
difficulty to taking the ring to Mordor.
Therefore, we can just use the uppy vendor libraries in the
wizard, and do a quick-n-dirty version of the uppy upload
code for the wizard-field-image uploader.
This commit allows for using Tab and Shift+Tab to indent
and de-indent selected text in the composer. The selected
text is searched for the most occurrences of either tabs (\t)
or spaces at the start of each line, and that character is
used for indentation of all lines.
Bianca Nenciu
Kris
Jarek Radosz
Osama Sayegh
Martin Brennan
David Taylor
Ayke Halder
Dan Ungureanu
Vinoth Kannan
Penar Musaraj
Krzysztof Kotlarek
Gerhard Schlager
Mark VanLandingham
janzenisaac
Alan Guo Xiang Tan
Joffrey JAFFEUX
Martin Brennan
Andrei Prigorshnev
Keegan George
Jordan Vidrine
Natalie Tay
Robin Ward
tshenry
Rafael dos Santos Silva
Régis Hanol
Mark VanLandingham
Roman Rizzi
Arpit Jalan
Meghna
Joe
Sam
jbrw
Kerry Liu