Currently when pressing Shift key and hitting Reply button the user
stays on the post they are on and does not get navigated to newly
created topic/PM/reply. This is fine for replies but creates confusion
when composing a new topic/PM.
This commits makes it such that pressing Shift key and Reply button
(or ctrl-shift-enter / cmd-shift-enter) works only for replies and not
for new topic/PM. The user will always be navigated to new topic/PM.
This means that our DiscourseURL logic will work consistently in tests, where `window.location` doesn't get updated.
To make it work properly, our `replaceState` implementation needed to be updated so that it writes the new URL to Ember's router, rather than bypassing the router and going straight to the `location` API.
A couple of tests needed updating following this fix:
- the composer-test was asserting that the new reply should be missing from the DOM... when really it **should** be in the DOM, and this fix to the test environment makes it so
- the topic-test was making a fake topic fixture based on the data from a topic with a different id. This was causing the topic route to get confused, and 'fix' the currentURL. This commit updates it to use a fixture with consistent data.
This commit also removes the feature detection of `window.history`. It's feature-detected within `discourse-location`. Plus, we don't support any browsers without it.
Previously only `<div>one top element</div>` was allowed because we use `firstChild` instead of `children`.
We also want `<div>one</div><div>two</div>` to work with this method.
This reverts commit ea84a82f77.
This is causing problems with `/theme-qunit` on legacy, non-ember-cli production sites. Reverting while we work on a fix
This is quite complex as it means that in production we have to build
Ember CLI test files and allow them to be used by our Rails application.
There is a fair bit of glue we can remove in the future once we move to
Ember CLI completely.
The `plugin:pull_compatible_all` task is intended to take incompatible plugins and downgrade them to an earlier version. Problem is, when running the rake task in development/production environments, the plugins have already been activated. If an incompatible plugin raises an error in `plugin.rb` then the rake task will be unable to start.
This commit centralises our LOAD_PLUGINS detection, adds support for LOAD_PLUGINS=0 in dev/prod, and adds a warning to `plugin:pull_compatible_all` if it's run with plugins enabled.
- Update the TOPIC_URL_REGEXP in `lib/url` so that `navigatedToPost` doesn't attempt to handle slug-less URLs. Slugs must contain at least one non-numeric character, so we can use that fact to make the regex more specific. We want slug-less URLs to be routed as a normal Ember transition, so that `topic-by-slug-or-id` can catch them and re-write the URL to include the slug.
- Update the `topic-by-slug-or-id` afterModel to ensure that the Ember router is used to handle the redirect, rather than DiscourseURL. This guarantees that it will function as a redirect (DiscourseURL.routeTo sometimes bypasses the router). This solves the history problem which was worked-around in 27211ee7bb.
- Update routes/topic to recover from aborted transitions gracefully. This means that following an aborted transition, the browser URL continues to be updated with post numbers as the user scrolls down the page.
An admin could search for all screened ip addresses in a block by
using wildcards. 192.168.* returned all IPs in range 192.168.0.0/16.
This feature allows admins to search for a single IP address in all
screened IP blocks. 192.168.0.1 returns all IP blocks that match it,
for example 192.168.0.0/16.
* FEATURE: Remove roll up button for screened IPs
* FIX: Match more specific screened IP address first
The new warnings cover more cases and more accurate. Most of the
warnings will be visible only to staff members because otherwise they
would leak information about user's preferences.
This commit extends the options which can be passed to
`PrettyText.markdown` so that which Markdown-it rules and Discourse
Markdown plugins to be used when rendering a text can be customizable.
Currently, this extension is mainly used by plugins.
Having to load `ip_addr` is confusing especially when that file exists
to monkey patch Ruby's `IpAddr` class. Moving it to our freedom patches
folder which is automatically loaded on initialization.
…after you re-open the modal or select another emoji.
Reason:
Even the most used emoji would be knocked off the list after a while, if you use any emoji outside the recent. Consider the sequence:
✅, 😃, ✅ (from recent), 😀, ✅ (from recent), 😛, ✅ (from recent), 😎, ✅ (from recent), and so on
With the previous logic, the check mark emoji would leave the list, even though it used constantly and (and the time of removal) would the the second most recent used emoji.
---
It doesn't update the list when you use the recent list so that you can click an emoji repeatedly and it doesn't shift from under your mouse cursor.
The app's wrapper element ID is different in tests. `app.rootElement` allows us to consistently obtain the selector in the initializer, so it works correctly regardless of the app's configuration.
The test environment will wait for all timers to settle before continuing. These timers were causing all tests involving `/t/*` routes to spend 500ms doing nothing.
Fun fact: we load the topic route 214 times during the core test suite. That means that this commit saves a total of around 107s across the whole suite. On my machine, that's a 30% improvement in runtime.
Modern Ember only sets up a container when the ApplicationInstance is booted. We have legacy code which relies on having access to a container before boot (e.g. during pre-initializers).
In production we run with the default `autoboot` flag, which triggers Ember's internal `_globalsMode` flag, which sets up an ApplicationInstance immediately when an Application is initialized (via the `_buildDeprecatedInstance` method).
In tests, we worked around the problem by creating a fresh container, and placing a reference to it under `Discourse.__container__`.
HOWEVER, Ember was still creating a Container instance for each ApplicationInstance to use internally, and make available to EmberObjects via injection. The `Discourse.__container__` instance we created was barely used at all.
Having two different Container instances in play could cause some weird issues. For example, I noticed the problem because the `appEvents` instance held by DiscourseURL was different to the `appEvents` instance held by all the Ember components in our app. This meant that events triggered by DiscourseURL were not picked up by components in test mode.
This commit makes the hack more robust by ensuring that Ember re-uses the Container instance which we created pre-boot. This means we only have one Container instance in play, and makes `appEvents` work reliably across all parts of the app. It also adds detailed comments describing the hack, to help future travelers.
Hopefully in future we can remove this hack entirely, but it will require significant refactoring to our initialization process in Core and Plugins.
The mapping-router and map-routes initializer are updated to avoid the need for `container.lookup` during teardown. This isn't allowed under modern Ember, but was previously working for us because the pre-initializer was using the 'fake' container which was not ember-managed.
This is a partial revert of 099b679fc5.
`Bookmark#topic_id` and `Bookmark#reminder_type` was dropped in
b22450c7a8 so we need to continue ignoring
the dropped columns so as to ensure a seamless deploy. Otherwise,
ActiveRecord's schema cache will still contain references to
`Bookmark#topic_id` when the column is dropped in a post migration.
New range tag for local dates with syntax like:
```
[date-range from=2022-01-06T13:00 to=2022-01-08 timezone=Australia/Sydney]
```
Previously, 2 dates in one line were considered as range. It was hard to decide if 2 dates are range when they were in separate lines or have some content between them.
New explicit tag should clearly distinguish between single date and range.
Common code from `addLocalDate` is extracted to `addSingleLocalDate`.
Both `addLocalDate` and new `addLocalRange` are using `addSingleLocalDate`.
Also, `defaultDateConfig` was extracted to have one place for all possible parameters.
1. Hide the results element when empty (and set top-margin of section to 0, which fixes some custom themes)
2. Fixed the on-hover color of .trash-recent
Multiple polls can be created without the min attribute but that means
the attribute defaults to 1. A default of 0 does not make any sense
because it is equivalent to saying that a user is not casting any votes.
David Taylor
Kris
dependabot[bot]
Jarek Radosz
Arpit Jalan
Robin Ward
Dan Ungureanu
Natalie Tay
Discourse Translator Bot
Bianca Nenciu
Vinoth Kannan
Alan Guo Xiang Tan
Krzysztof Kotlarek
Rafael dos Santos Silva
Andrei Prigorshnev
Penar Musaraj