The Menu Customizer feature includes a performance technique whereby the controls for nav menu items are only embedded into the DOM once the containing menu section is expanded. This commit implements the same DOM deferral for widgets but goes a step further than just embedding the controls once the widget area's Customizer section is expanded: it also defers the embedding of the widget control's form until the widget is expanded, at which point the `widget-added` event also fires to allow any additional widget initialization to be done. The deferred DOM embedding can speed up initial load time by 10x or more. This DOM deferral also yields a reduction in overall memory usage in the browser process.
Includes changes to `wp_widget_control()` to facilitate separating out the widget form from the surrounding accordion container; also includes unit tests for this previously-untested function. Also included are initial QUnit tests (finally) for widgets in the Customizer.
Fixes#33901.
Built from https://develop.svn.wordpress.org/trunk@34563
git-svn-id: http://core.svn.wordpress.org/trunk@34527 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Previously, the 'page_comments' toggle allowed users to disable comment
pagination. This toggle was only superficial, however. Even with
'page_comments' turned on, `comments_template()` loaded all of a post's
comments into memory, and passed them to `wp_list_comments()` and
`Walker_Comment`, the latter of which produced markup for only the
current page of comments. In other words, it was possible to enable
'page_comments', thereby showing only a subset of a post's comments on a given
page, but all comments continued to be loaded in the background. This technique
scaled poorly. Posts with hundreds or thousands of comments would load slowly,
or not at all, even when the 'comments_per_page' setting was set to a
reasonable number.
Recent changesets have addressed this problem through more efficient tree-
walking, better descendant caching, and more selective queries for top-level
post comments. The current changeset completes the project by addressing the
root issue: that loading a post causes all of its comments to be loaded too.
Here's the breakdown:
* Comment pagination is now forced. Setting 'page_comments' to false leads to evil things when you have many comments. If you want to avoid pagination, set 'comments_per_page' to something high.
* The 'page_comments' setting has been expunged from options-discussion.php, and from places in the codebase where it was referenced. For plugins relying on 'page_comments', we now force the value to `true` with a `pre_option` filter.
* `comments_template()` now queries for an appropriately small number of comments. Usually, this means the `comments_per_page` value.
* To preserve the current (odd) behavior for comment pagination links, some unholy hacks have been inserted into `comments_template()`. The ugliness is insulated in this function for backward compatibility and to minimize collateral damage. A side-effect is that, for certain settings of 'default_comments_page', up to 2x the value of `comments_per_page` might be fetched at a time.
* In support of these changes, a `$format` parameter has been added to `WP_Comment::get_children()`. This param allows you to request a flattened array of comment children, suitable for feeding into `Walker_Comment`.
* `WP_Query` loops are now informed about total available comment counts and comment pages by the `WP_Comment_Query` (`found_comments`, `max_num_pages`), instead of by `Walker_Comment`.
Aside from radical performance improvements in the case of a post with many
comments, this changeset fixes a bug that caused the first page of comments to
be partial (`found_comments` % `comments_per_page`), rather than the last, as
you'd expect.
Props boonebgorges, wonderboymusic.
Fixes#8071.
Built from https://develop.svn.wordpress.org/trunk@34561
git-svn-id: http://core.svn.wordpress.org/trunk@34525 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* Don't allow comments to be created for posts that have `comment_status` set to `'closed'`
* Set some magic props on `WP_User` to vars before passing them to `wp_xmlrpc_server::escape()`
Props wonderboymusic, jesin.
Fixes#27471.
Built from https://develop.svn.wordpress.org/trunk@34559
git-svn-id: http://core.svn.wordpress.org/trunk@34523 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Shortlinks had their day in the popular usage sun before all these services moved to their own shorteners and running your own custom one became a lot easier. Shortlinks are still useful in some contexts, such as analytics or when links need to be shared verbally or copied down by hand.
If any filters are hooked onto `pre_get_shortlink` or `get_shortlink` and produce a non-empty value (with an exception described below), the button will magically reappear. This allows any custom shortlinks to keep the button without hiccups.
If you're in need of the default shortlinks, the fastest way to reenable them is `add_filter( 'pre_get_shortlink', '__return_false' )`. Note that it must return false in order to continue on to the rest of `wp_get_shortlink()`.
props grvrulz for the initial patch.
fixes#33495.
Built from https://develop.svn.wordpress.org/trunk@34556
git-svn-id: http://core.svn.wordpress.org/trunk@34520 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This is hopefully the final attempt at adding notifications to the #core channel on Slack. By default, Travis spams the channel. In order to cut that down a bit, notifications are set as follows:
- On Failure: Always (If the tests fail, the world needs to know)
- On Success: Change (this means that the first green run after a red run aka, the world is happy again)
- On Start: Never (Travis runs every time there is a commit. No need for a notification)
Props Netweb, samuelsidler
Fixes#30755
Built from https://develop.svn.wordpress.org/trunk@34555
git-svn-id: http://core.svn.wordpress.org/trunk@34519 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Comments can be threaded. Now your query can be threaded too! Bonus: it's
not totally insane.
* The new `$hierarchical` parameter for `WP_Comment_Query` accepts three values:
* `false` - Default value, and equivalent to current behavior. No descendants are fetched for matched comments.
* `'flat'` - `WP_Comment_Query` will fetch the descendant tree for each comment matched by the query paramaters, and append them to the flat array of comments returned. Use this when you have a separate routine for constructing the tree - for example, when passing a list of comments to a `Walker` object.
* `'threaded'` - `WP_Comment_Query` will fetch the descendant tree for each comment, and return it in a tree structure located in the `children` property of the `WP_Comment` objects.
* `WP_Comment` now has a few utility methods for fetching the descendant tree (`get_children()`), fetching a single direct descendant comment (`get_child()`), and adding anothing `WP_Comment` object as a direct descendant (`add_child()`). Note that `add_child()` only modifies the comment object - it does not touch the database.
Props boonebgorges, wonderboymusic.
See #8071.
Built from https://develop.svn.wordpress.org/trunk@34546
git-svn-id: http://core.svn.wordpress.org/trunk@34510 1a063a9b-81f0-0310-95a4-ce76da25c4cd
[34537] hooked `wp_new_comment_notify_postauthor()` to the
'wp_set_comment_status' when a comment had been approved. When performing
multiple actions on a comment in the same request (as happens in
`Tests_Ajax_DeleteComment::test_ajax_trash_double_action()`, and may happen
sometimes in real life too), and when one of those actions involves deleting
the comment, the `$comment_ID` passed to `wp_new_comment_notify_postauthor()`
can correspond to an already-deleted comment. The `comment_status` check should
account for this possibility.
See #14078.
Built from https://develop.svn.wordpress.org/trunk@34545
git-svn-id: http://core.svn.wordpress.org/trunk@34509 1a063a9b-81f0-0310-95a4-ce76da25c4cd
`WP_Comment_Query` will now report the total number of comments matching the
query params (`comments_found`), as well as the total number of pages required
to display these comments (`max_num_pages`). Because `SQL_CALC_FOUND_ROWS`
queries can introduce a lot of overhead in some cases, we disable the feature
by default. Pass `no_found_rows=false` to `WP_Comment_Query` to enable the
count. (We use the negative parameter name 'no_found_rows' for parity with
`WP_Query`.)
Props wonderboymusic, boonebgorges.
See #8071.
Built from https://develop.svn.wordpress.org/trunk@34544
git-svn-id: http://core.svn.wordpress.org/trunk@34508 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The 'last_changed' incrementor is used to invalidate the `get_terms()` query
cache. Since `get_terms()` queries may reference 'meta_query', changing term
metadata could change the results of the queries. So we invalidate the cache
on add, delete, and update.
See #10142.
Built from https://develop.svn.wordpress.org/trunk@34538
git-svn-id: http://core.svn.wordpress.org/trunk@34502 1a063a9b-81f0-0310-95a4-ce76da25c4cd
John Blackbourn
Sergey Biryukov
Scott Taylor
Aaron Jorbin
Drew Jaynes
Weston Ruter
Boone Gorges
Helen Hou-Sandí