Adds timer_float which can be used to get the time elapsed so far during the PHP script. Should make it easier to display the page generation time in the footer of admin.
WordPress should expose timing data as a float in the most accurate manner possible. timer_stop() has two problems: it uses an initial timestamp generated later than it needs to be and its formatted return value can not reliably be used as a number (some locales swap commas and periods, for example).
Props andy, matt, jorbin.
Fixes#39163.
Built from https://develop.svn.wordpress.org/trunk@50786
git-svn-id: http://core.svn.wordpress.org/trunk@50395 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In [49752] a check was added to prevent creating new Application Passwords if Basic Auth credentials were detected to prevent conflicts. This check takes place in WP-Admin, though a conflict would only arise if Basic Auth was used on the website's front-end.
This commit extracts the Basic Auth check into a reusable function, `wp_is_site_protected_by_basic_auth()`, which can be adjusted using a filter of the same name. This way, a site that uses Basic Auth to protect WP-Admin can still use the Application Passwords feature.
In the future, instead of requiring the use of a filter, WordPress could make a loopback request and check for a `WWW-Authenticate` header to make this detection more robust out of the box.
Props SeBsZ, archon810, aaroncampbell, ocean90, SergeyBiryukov, TimothyBlynJacobs.
Fixes#52066.
Built from https://develop.svn.wordpress.org/trunk@50006
git-svn-id: http://core.svn.wordpress.org/trunk@49707 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Previously, we only supported `application/json` which prevented using subtypes like `application/activity+json`. This allows for the REST API to `json_decode` the body of requests using a JSON subtype `Content-Type`. Additionally, `wp_die()` now properly sends the error as JSON when a JSON subtype is specified in the `Accept` header.
Props pfefferle.
Fixes#49404.
Built from https://develop.svn.wordpress.org/trunk@49329
git-svn-id: http://core.svn.wordpress.org/trunk@49090 1a063a9b-81f0-0310-95a4-ce76da25c4cd
When the `mysql` extention isn't loaded and a custom db dropin is not in place, we give folks a nice error. However, we can't assume that the `WP_CONTENT_DIR` constant is set yet since this runs before we define default constants.
This fixes a PHP 8 error.
Props jorbin.
Merges [49161] to trunk.
See #50913.
Built from https://develop.svn.wordpress.org/trunk@49163
git-svn-id: http://core.svn.wordpress.org/trunk@48925 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In WordPress 4.4 the REST API was first introduced. A few releases later in WordPress 4.7, the Content API endpoints were added, paving the way for Gutenberg and countless in-site experiences. In the intervening years, numerous plugins have built on top of the REST API. Many developers shared a common frustration, the lack of external authentication to the REST API.
This commit introduces Application Passwords to allow users to connect to external applications to their WordPress website. Users can generate individual passwords for each application, allowing for easy revocation and activity monitoring. An authorization flow is introduced to make the connection flow simple for users and application developers.
Application Passwords uses Basic Authentication, and by default is only available over an SSL connection.
Props georgestephanis, kasparsd, timothyblynjacobs, afercia, akkspro, andraganescu, arippberger, aristath, austyfrosty, ayesh, batmoo, bradyvercher, brianhenryie, helen, ipstenu, jeffmatson, jeffpaul, joostdevalk, joshlevinson, kadamwhite, kjbenk, koke, michael-arestad, Otto42, pekz0r, salzano, spacedmonkey, valendesigns.
Fixes#42790.
Built from https://develop.svn.wordpress.org/trunk@49109
git-svn-id: http://core.svn.wordpress.org/trunk@48871 1a063a9b-81f0-0310-95a4-ce76da25c4cd
These actions allow debugging tools to track `WP_Error` instances as they're created and subsequently passed between functions which check for error objects.
Props Shelob9, Mte90, TimothyBlynJacobs, johnbillion
Fixes#40568
Built from https://develop.svn.wordpress.org/trunk@49022
git-svn-id: http://core.svn.wordpress.org/trunk@48784 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The intention of `wp_get_environment_type()` is to provide a consistent means of identifying the environment type, not of identifying a specific environment.
Actual environments should fit within one of the existing types: `local`, `development`, `staging`, or `production`. That should cover the types that plugins and themes might be concerned about when toggling functionality.
Props johnbillion, joostdevalk, TimothyBlynJacobs, jeremyfelt, batmoo, claytoncollie, Clorith, markjaquith, garrett-eclipse, GaryJ, elrae.
Fixes#50992.
Built from https://develop.svn.wordpress.org/trunk@48894
git-svn-id: http://core.svn.wordpress.org/trunk@48656 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This gives developers a better control over their existing development workflow and ensures that `local` is not the exact same as `development` if it does not need to be.
Props claytoncollie, johnbillion, jeremyfelt, kreppar, dushakov, TimothyBlynJacobs, Ipstenu, khag7, knutsp, Clorith, markjaquith, joostdevalk, SergeyBiryukov.
Fixes#51064.
Built from https://develop.svn.wordpress.org/trunk@48856
git-svn-id: http://core.svn.wordpress.org/trunk@48618 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Since `wp_get_environment_type()` runs too early for plugins to hook these filters, and the result is then cached in a static variable and cannot be changed later, the filters are not that useful.
The `WP_ENVIRONMENT_TYPES` and `WP_ENVIRONMENT_TYPE` constants and environment variables should be enough for now.
Follow-up to [47919], [48188], [48372].
Props Clorith, SergeyBiryukov.
Fixes#33161.
Built from https://develop.svn.wordpress.org/trunk@48662
git-svn-id: http://core.svn.wordpress.org/trunk@48424 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* Rename the `wp_approved_environment_types` filter to `wp_environment_types`.
* Introduce `WP_ENVIRONMENT_TYPES` system variable and constant to complement the filter.
* Correct the argument type for the `wp_environment_types` filter.
* Cache the result in a static variable to ensure consistent return value.
* Rename the `stage` type to `staging`.
Follow-up to [47919].
Props dlh, dd32, TimothyBlynJacobs, johnbillion, pbiron.
See #33161.
Built from https://develop.svn.wordpress.org/trunk@48188
git-svn-id: http://core.svn.wordpress.org/trunk@47957 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Partially reverts [48059] as there's no full consensus on the removal of the text prefix. Further actions should be taken to improve consistency and accessibility of the admin notices. Keeps some improvements to the translatable strings from [48059].
Fixes#47656.
Built from https://develop.svn.wordpress.org/trunk@48115
git-svn-id: http://core.svn.wordpress.org/trunk@47884 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The tag was supported in phpDocumentor 1.x, but is no longer supported in 2.x and 3.x.
Usage of static variables is considered an internal implementation detail and has no information value for someone reading the docs.
Props alishanvr, jrf.
Fixes#50426.
Built from https://develop.svn.wordpress.org/trunk@48109
git-svn-id: http://core.svn.wordpress.org/trunk@47878 1a063a9b-81f0-0310-95a4-ce76da25c4cd
For a number of years, most of the WordPress error messages have been prefixed with "Error:". However, these messages appear in a context where it's already clear an error occurred. Whether it's an error, a warning, or any other classification, that's not so relevant for users. The content of the message is the relevant part. The "Error:" prefix doesn't add great value while it does add unnecessary complexity for the message readability.
Also, revises some of these messages to improve clarity and removes HTML from translatable strings.
Props garrett-eclipse, ramiy, SergeyBiryukov, afercia, sabernhardt, quadthemes, audrasjb.
See #47003, #43037, #42945, #15887.
Fixes#47656.
Built from https://develop.svn.wordpress.org/trunk@48059
git-svn-id: http://core.svn.wordpress.org/trunk@47826 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Many caching backend have support for multiple gets in a single request. This brings that support to core, with a compatability fallback that will loop over requests if needed.
Fixes: #20875.
Props: nacin, tollmanz, wonderboymusic, ryan, jeremyfelt, spacedmonkey, boonebgorges, dd32, rmccue, ocean90, jipmoors, johnjamesjacoby, tillkruess, donmhico, davidbaumwald, SergeyBiryukov, whyisjake.
Built from https://develop.svn.wordpress.org/trunk@47938
git-svn-id: http://core.svn.wordpress.org/trunk@47711 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The type can be set via the `WP_ENVIRONMENT_TYPE` global system variable, a constant of the same name, or the `wp_get_environment_type` filter.
Possible values include `development`, `stage`, `production'. If not set, the type defaults to `production`.
Props Clorith, krogsgard, joostdevalk, frank-klein, Maelacuna, nathanrice, grierson, jchristopher, davidvee, jackfungi, johnbillion, tabrisrp, knutsp, ev3rywh3re, Rastaban, danielbachhuber, pfefferle, audrasjb, SergeyBiryukov.
Fixes#33161.
Built from https://develop.svn.wordpress.org/trunk@47919
git-svn-id: http://core.svn.wordpress.org/trunk@47693 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The `register_globals` directive in PHP was deprecated in version 5.3 and removed entirely in 5.4.
Now that WordPress only supports PHP 5.6.20 and newer, the `wp_unregister_GLOBALS()` function can be deprecated.
Props ayeshrajans, desrosj, SergeyBiryukov.
Fixes#49938.
Built from https://develop.svn.wordpress.org/trunk@47612
git-svn-id: http://core.svn.wordpress.org/trunk@47387 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This avoids the performance overhead of the function call every time `dirname( __FILE__ )` was used instead of `__DIR__`.
This commit also includes:
* Removing unnecessary parentheses from `include`/`require` statements. These are language constructs, not function calls.
* Replacing `include` statements for several files with `require_once`, for consistency:
* `wp-admin/admin-header.php`
* `wp-admin/admin-footer.php`
* `wp-includes/version.php`
Props ayeshrajans, desrosj, valentinbora, jrf, joostdevalk, netweb.
Fixes#48082.
Built from https://develop.svn.wordpress.org/trunk@47198
git-svn-id: http://core.svn.wordpress.org/trunk@46998 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Previously, `wp_favicon_request()` was introduced in [13205] to avoid a performance hit of serving a full 404 page on every favicon request.
While working as intended, that implementation did not provide a way for theme or plugin authors to manage the behavior of favicon requests.
This changeset implements the following logic (only applied if WordPress is installed in the root directory):
* If there is a Site Icon set in Customizer, redirect `/favicon.ico` requests to that icon.
* Otherwise, use the WordPress logo as a default icon.
* If a physical `/favicon.ico` file exists, do nothing, let the server handle the request.
Handling `/favicon.ico` is now more consistent with handling `/robots.txt` requests.
New functions and hooks:
* Introduce `is_favicon()` conditional tag to complement `is_robots()`.
* Introduce `do_favicon` action to complement `do_robots` and use it in template loader.
* Introduce `do_favicon()` function, hooked to the above action by default, to complement `do_robots()`.
* Introduce `do_faviconico` action to complement `do_robotstxt`, for plugins to override the default behavior.
* Mark `wp_favicon_request()` as deprecated in favor of `do_favicon()`.
Props jonoaldersonwp, birgire, joostdevalk, mukesh27, SergeyBiryukov.
Fixes#47398.
Built from https://develop.svn.wordpress.org/trunk@47018
git-svn-id: http://core.svn.wordpress.org/trunk@46818 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* Fix typo in `is_blog_admin()` description.
* Capitalize PHP correctly in `enable_wp_debug_mode_checks` filter description.
* Capitalize XML correctly in `wp_is_xml_request()` return value description.
Props stevegrunwell.
Fixes#48771.
Built from https://develop.svn.wordpress.org/trunk@46759
git-svn-id: http://core.svn.wordpress.org/trunk@46559 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The path to magic quote sanity took a fun and exciting turn: PHP core removed it and WordPress updated the minimum version.
For the formally external pclzip, the code is commented out to make investigating easier and in case we ever need to merge upstream (if that still exists) changes.
Props ayeshrajans, jrf, jorbin.
See #47783.
Fixes#18322.
Built from https://develop.svn.wordpress.org/trunk@46105
git-svn-id: http://core.svn.wordpress.org/trunk@45917 1a063a9b-81f0-0310-95a4-ce76da25c4cd
John Blackbourn
desrosj
Aaron Jorbin
Sergey Biryukov
TimothyBlynJacobs
Andrea Fercia
whyisjake