OpenSearch/Vagrantfile

303 lines
10 KiB
Plaintext
Raw Normal View History

# -*- mode: ruby -*-
# vi: set ft=ruby :
# This Vagrantfile exists to test packaging. Read more about its use in the
# vagrant section in TESTING.asciidoc.
# Licensed to Elasticsearch under one or more contributor
# license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright
# ownership. Elasticsearch licenses this file to you under
# the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied. See the License for the
# specific language governing permissions and limitations
# under the License.
Vagrant.configure(2) do |config|
[test] Gradle-ify vagrant tests This gets the tar and tar_plugins tests working in gradle. It does so by adding a subproject, qa/vagrant, which adds the following tasks: Verification ------------ checkPackages - Check the packages against a representative sample of the linux distributions we have in our Vagrantfile checkPackagesAllDistros - Check the packages against all the linux distributions we have in our Vagrantfile Package Verification -------------------- checkCentos6 - Run packaging tests against centos-6 checkCentos7 - Run packaging tests against centos-7 checkDebian8 - Run packaging tests against debian-8 checkFedora22 - Run packaging tests against fedora-22 checkOel7 - Run packaging tests against oel-7 checkOpensuse13 - Run packaging tests against opensuse-13 checkSles12 - Run packaging tests against sles-12 checkUbuntu1204 - Run packaging tests against ubuntu-1204 checkUbuntu1404 - Run packaging tests against ubuntu-1404 checkUbuntu1504 - Run packaging tests against ubuntu-1504 Vagrant ------- smokeTestCentos6 - Smoke test the centos-6 VM smokeTestCentos7 - Smoke test the centos-7 VM smokeTestDebian8 - Smoke test the debian-8 VM smokeTestFedora22 - Smoke test the fedora-22 VM smokeTestOel7 - Smoke test the oel-7 VM smokeTestOpensuse13 - Smoke test the opensuse-13 VM smokeTestSles12 - Smoke test the sles-12 VM smokeTestUbuntu1204 - Smoke test the ubuntu-1204 VM smokeTestUbuntu1404 - Smoke test the ubuntu-1404 VM smokeTestUbuntu1504 - Smoke test the ubuntu-1504 VM vagrantHaltCentos6 - Shutdown the vagrant VM running centos-6 vagrantHaltCentos7 - Shutdown the vagrant VM running centos-7 vagrantHaltDebian8 - Shutdown the vagrant VM running debian-8 vagrantHaltFedora22 - Shutdown the vagrant VM running fedora-22 vagrantHaltOel7 - Shutdown the vagrant VM running oel-7 vagrantHaltOpensuse13 - Shutdown the vagrant VM running opensuse-13 vagrantHaltSles12 - Shutdown the vagrant VM running sles-12 vagrantHaltUbuntu1204 - Shutdown the vagrant VM running ubuntu-1204 vagrantHaltUbuntu1404 - Shutdown the vagrant VM running ubuntu-1404 vagrantHaltUbuntu1504 - Shutdown the vagrant VM running ubuntu-1504 vagrantSmokeTest - Smoke test some representative distros from the Vagrantfile vagrantSmokeTestAllDistros - Smoke test all distros from the Vagrantfile vagrantUpCentos6 - Startup a vagrant VM running centos-6 vagrantUpCentos7 - Startup a vagrant VM running centos-7 vagrantUpDebian8 - Startup a vagrant VM running debian-8 vagrantUpFedora22 - Startup a vagrant VM running fedora-22 vagrantUpOel7 - Startup a vagrant VM running oel-7 vagrantUpOpensuse13 - Startup a vagrant VM running opensuse-13 vagrantUpSles12 - Startup a vagrant VM running sles-12 vagrantUpUbuntu1204 - Startup a vagrant VM running ubuntu-1204 vagrantUpUbuntu1404 - Startup a vagrant VM running ubuntu-1404 vagrantUpUbuntu1504 - Startup a vagrant VM running ubuntu-1504 It does not make the "check" task depend on "checkPackages" so running the vagrant tests is still optional. They are slow and depend on vagrant and virtualbox. The Package Verification tasks are useful for testing individual distros. The Vagrant tasks are listed in `gradle tasks` primarily for discoverability.
2015-11-02 12:40:47 -05:00
config.vm.define "ubuntu-1404" do |config|
config.vm.box = "elastic/ubuntu-14.04-x86_64"
ubuntu_common config
end
config.vm.define "ubuntu-1604" do |config|
config.vm.box = "elastic/ubuntu-16.04-x86_64"
ubuntu_common config, extra: <<-SHELL
# Install Jayatana so we can work around it being present.
[ -f /usr/share/java/jayatanaag.jar ] || install jayatana
SHELL
end
# Wheezy's backports don't contain Openjdk 8 and the backflips required to
# get the sun jdk on there just aren't worth it. We have jessie for testing
# debian and it works fine.
[test] Gradle-ify vagrant tests This gets the tar and tar_plugins tests working in gradle. It does so by adding a subproject, qa/vagrant, which adds the following tasks: Verification ------------ checkPackages - Check the packages against a representative sample of the linux distributions we have in our Vagrantfile checkPackagesAllDistros - Check the packages against all the linux distributions we have in our Vagrantfile Package Verification -------------------- checkCentos6 - Run packaging tests against centos-6 checkCentos7 - Run packaging tests against centos-7 checkDebian8 - Run packaging tests against debian-8 checkFedora22 - Run packaging tests against fedora-22 checkOel7 - Run packaging tests against oel-7 checkOpensuse13 - Run packaging tests against opensuse-13 checkSles12 - Run packaging tests against sles-12 checkUbuntu1204 - Run packaging tests against ubuntu-1204 checkUbuntu1404 - Run packaging tests against ubuntu-1404 checkUbuntu1504 - Run packaging tests against ubuntu-1504 Vagrant ------- smokeTestCentos6 - Smoke test the centos-6 VM smokeTestCentos7 - Smoke test the centos-7 VM smokeTestDebian8 - Smoke test the debian-8 VM smokeTestFedora22 - Smoke test the fedora-22 VM smokeTestOel7 - Smoke test the oel-7 VM smokeTestOpensuse13 - Smoke test the opensuse-13 VM smokeTestSles12 - Smoke test the sles-12 VM smokeTestUbuntu1204 - Smoke test the ubuntu-1204 VM smokeTestUbuntu1404 - Smoke test the ubuntu-1404 VM smokeTestUbuntu1504 - Smoke test the ubuntu-1504 VM vagrantHaltCentos6 - Shutdown the vagrant VM running centos-6 vagrantHaltCentos7 - Shutdown the vagrant VM running centos-7 vagrantHaltDebian8 - Shutdown the vagrant VM running debian-8 vagrantHaltFedora22 - Shutdown the vagrant VM running fedora-22 vagrantHaltOel7 - Shutdown the vagrant VM running oel-7 vagrantHaltOpensuse13 - Shutdown the vagrant VM running opensuse-13 vagrantHaltSles12 - Shutdown the vagrant VM running sles-12 vagrantHaltUbuntu1204 - Shutdown the vagrant VM running ubuntu-1204 vagrantHaltUbuntu1404 - Shutdown the vagrant VM running ubuntu-1404 vagrantHaltUbuntu1504 - Shutdown the vagrant VM running ubuntu-1504 vagrantSmokeTest - Smoke test some representative distros from the Vagrantfile vagrantSmokeTestAllDistros - Smoke test all distros from the Vagrantfile vagrantUpCentos6 - Startup a vagrant VM running centos-6 vagrantUpCentos7 - Startup a vagrant VM running centos-7 vagrantUpDebian8 - Startup a vagrant VM running debian-8 vagrantUpFedora22 - Startup a vagrant VM running fedora-22 vagrantUpOel7 - Startup a vagrant VM running oel-7 vagrantUpOpensuse13 - Startup a vagrant VM running opensuse-13 vagrantUpSles12 - Startup a vagrant VM running sles-12 vagrantUpUbuntu1204 - Startup a vagrant VM running ubuntu-1204 vagrantUpUbuntu1404 - Startup a vagrant VM running ubuntu-1404 vagrantUpUbuntu1504 - Startup a vagrant VM running ubuntu-1504 It does not make the "check" task depend on "checkPackages" so running the vagrant tests is still optional. They are slow and depend on vagrant and virtualbox. The Package Verification tasks are useful for testing individual distros. The Vagrant tasks are listed in `gradle tasks` primarily for discoverability.
2015-11-02 12:40:47 -05:00
config.vm.define "debian-8" do |config|
config.vm.box = "elastic/debian-8-x86_64"
deb_common config
end
config.vm.define "centos-6" do |config|
config.vm.box = "elastic/centos-6-x86_64"
rpm_common config
end
config.vm.define "centos-7" do |config|
config.vm.box = "elastic/centos-7-x86_64"
rpm_common config
end
config.vm.define "oel-6" do |config|
config.vm.box = "elastic/oraclelinux-6-x86_64"
rpm_common config
end
config.vm.define "oel-7" do |config|
config.vm.box = "elastic/oraclelinux-7-x86_64"
rpm_common config
end
config.vm.define "fedora-25" do |config|
config.vm.box = "elastic/fedora-25-x86_64"
dnf_common config
end
config.vm.define "opensuse-42" do |config|
config.vm.box = "elastic/opensuse-42-x86_64"
opensuse_common config
end
config.vm.define "sles-12" do |config|
config.vm.box = "elastic/sles-12-x86_64"
sles_common config
end
# Switch the default share for the project root from /vagrant to
# /elasticsearch because /vagrant is confusing when there is a project inside
# the elasticsearch project called vagrant....
config.vm.synced_folder ".", "/vagrant", disabled: true
config.vm.synced_folder ".", "/elasticsearch"
Add Vagrant Gradle plugin This commit changes the current :elactisearch:qa:vagrant build file and transforms it into a Gradle plugin in order to reuse it in other projects. Most of the code from the build.gradle file has been moved into the VagrantTestPlugin class. To avoid duplicated VMs when running vagrant tests, the Gradle plugin sets the following environment variables before running vagrant commands: VAGRANT_CWD: absolute path to the folder that contains the Vagrantfile VAGRANT_PROJECT_DIR: absolute path to the Gradle project that use the VagrantTestPlugin The VAGRANT_PROJECT_DIR is used to share project folders and files with the vagrant VM. These folders and files are exported when running the task `gradle vagrantSetUp` which: - collects all project archives dependencies and copies them into `${project.buildDir}/bats/archives` - copy all project bats testing files from 'src/test/resources/packaging/tests' into `${project.buildDir}/bats/tests` - copy all project bats utils files from 'src/test/resources/packaging/utils' into `${project.buildDir}/bats/utils` It is also possible to inherit and grab the archives/tests/utils files from project dependencies using the plugin configuration: apply plugin: 'elasticsearch.vagrant' esvagrant { inheritTestUtils true|false inheritTestArchives true|false inheritTests true|false } dependencies { // Inherit Bats test utils from :qa:vagrant project bats project(path: ':qa:vagrant', configuration: 'bats') } The folders `${project.buildDir}/bats/archives`, `${project.buildDir}/bats/tests` and `${project.buildDir}/bats/utils` are then exported to the vagrant VMs and mapped to the BATS_ARCHIVES, BATS_TESTS and BATS_UTILS environnement variables. The following Gradle tasks have also be renamed: * gradle vagrantSetUp This task copies all the necessary files to the project build directory (was `prepareTestRoot`) * gradle vagrantSmokeTest This task starts the VMs and echoes a "Hello world" within each VM (was: `smokeTest`)
2016-10-19 04:01:13 -04:00
# Expose project directory
PROJECT_DIR = ENV['VAGRANT_PROJECT_DIR'] || Dir.pwd
config.vm.synced_folder PROJECT_DIR, "/project"
config.vm.provider "virtualbox" do |v|
# Give the boxes 3GB because Elasticsearch defaults to using 2GB
v.memory = 3072
end
if Vagrant.has_plugin?("vagrant-cachier")
config.cache.scope = :box
end
config.vm.defined_vms.each do |name, config|
config.options[:autostart] = false
set_prompt = lambda do |config|
# Sets up a consistent prompt for all users. Or tries to. The VM might
# contain overrides for root and vagrant but this attempts to work around
# them by re-source-ing the standard prompt file.
config.vm.provision "prompt", type: "shell", inline: <<-SHELL
cat \<\<PROMPT > /etc/profile.d/elasticsearch_prompt.sh
export PS1='#{name}:\\w$ '
PROMPT
grep 'source /etc/profile.d/elasticsearch_prompt.sh' ~/.bashrc |
cat \<\<SOURCE_PROMPT >> ~/.bashrc
# Replace the standard prompt with a consistent one
source /etc/profile.d/elasticsearch_prompt.sh
SOURCE_PROMPT
grep 'source /etc/profile.d/elasticsearch_prompt.sh' ~vagrant/.bashrc |
cat \<\<SOURCE_PROMPT >> ~vagrant/.bashrc
# Replace the standard prompt with a consistent one
source /etc/profile.d/elasticsearch_prompt.sh
SOURCE_PROMPT
SHELL
# Creates a file to mark the machine as created by vagrant. Tests check
# for this file and refuse to run if it is not present so that they can't
# be run unexpectedly.
config.vm.provision "markerfile", type: "shell", inline: <<-SHELL
touch /etc/is_vagrant_vm
SHELL
end
config.config_procs.push ['2', set_prompt]
end
end
def ubuntu_common(config, extra: '')
deb_common config, extra: extra
end
def deb_common(config, extra: '')
# http://foo-o-rama.com/vagrant--stdin-is-not-a-tty--fix.html
config.vm.provision "fix-no-tty", type: "shell" do |s|
s.privileged = false
s.inline = "sudo sed -i '/tty/!s/mesg n/tty -s \\&\\& mesg n/' /root/.profile"
end
provision(config,
update_command: "apt-get update",
update_tracking_file: "/var/cache/apt/archives/last_update",
install_command: "apt-get install -y",
extra: extra)
end
def rpm_common(config)
provision(config,
update_command: "yum check-update",
update_tracking_file: "/var/cache/yum/last_update",
install_command: "yum install -y")
end
def dnf_common(config)
provision(config,
update_command: "dnf check-update",
update_tracking_file: "/var/cache/dnf/last_update",
install_command: "dnf install -y",
install_command_retries: 5)
if Vagrant.has_plugin?("vagrant-cachier")
# Autodetect doesn't work....
config.cache.auto_detect = false
config.cache.enable :generic, { :cache_dir => "/var/cache/dnf" }
end
end
def opensuse_common(config)
suse_common config, ''
end
def suse_common(config, extra)
provision(config,
update_command: "zypper --non-interactive list-updates",
update_tracking_file: "/var/cache/zypp/packages/last_update",
install_command: "zypper --non-interactive --quiet install --no-recommends",
extra: extra)
end
def sles_common(config)
extra = <<-SHELL
zypper rr systemsmanagement_puppet puppetlabs-pc1
zypper --non-interactive install git-core
SHELL
suse_common config, extra
end
# Register the main box provisioning script.
# @param config Vagrant's config object. Required.
# @param update_command [String] The command used to update the package
# manager. Required. Think `apt-get update`.
# @param update_tracking_file [String] The location of the file tracking the
# last time the update command was run. Required. Should be in a place that
# is cached by vagrant-cachier.
# @param install_command [String] The command used to install a package.
# Required. Think `apt-get install #{package}`.
# @param extra [String] Extra provisioning commands run before anything else.
# Optional. Used for things like setting up the ppa for Java 8.
def provision(config,
update_command: 'required',
update_tracking_file: 'required',
install_command: 'required',
install_command_retries: 0,
extra: '')
# Vagrant run ruby 2.0.0 which doesn't have required named parameters....
raise ArgumentError.new('update_command is required') if update_command == 'required'
raise ArgumentError.new('update_tracking_file is required') if update_tracking_file == 'required'
raise ArgumentError.new('install_command is required') if install_command == 'required'
config.vm.provider "virtualbox" do |v|
# Give the box more memory and cpu because our tests are beasts!
v.memory = Integer(ENV['VAGRANT_MEMORY'] || 8192)
v.cpus = Integer(ENV['VAGRANT_CPUS'] || 4)
end
config.vm.synced_folder "#{Dir.home}/.gradle/caches", "/home/vagrant/.gradle/caches",
create: true,
owner: "vagrant"
config.vm.provision "dependencies", type: "shell", inline: <<-SHELL
set -e
set -o pipefail
# Retry install command up to $2 times, if failed
retry_installcommand() {
n=0
while true; do
#{install_command} $1 && break
let n=n+1
if [ $n -ge $2 ]; then
echo "==> Exhausted retries to install $1"
return 1
fi
echo "==> Retrying installing $1, attempt $((n+1))"
# Add a small delay to increase chance of metalink providing updated list of mirrors
sleep 5
done
}
installed() {
command -v $1 2>&1 >/dev/null
}
install() {
# Only apt-get update if we haven't in the last day
if [ ! -f #{update_tracking_file} ] || [ "x$(find #{update_tracking_file} -mtime +0)" == "x#{update_tracking_file}" ]; then
[test] Gradle-ify vagrant tests This gets the tar and tar_plugins tests working in gradle. It does so by adding a subproject, qa/vagrant, which adds the following tasks: Verification ------------ checkPackages - Check the packages against a representative sample of the linux distributions we have in our Vagrantfile checkPackagesAllDistros - Check the packages against all the linux distributions we have in our Vagrantfile Package Verification -------------------- checkCentos6 - Run packaging tests against centos-6 checkCentos7 - Run packaging tests against centos-7 checkDebian8 - Run packaging tests against debian-8 checkFedora22 - Run packaging tests against fedora-22 checkOel7 - Run packaging tests against oel-7 checkOpensuse13 - Run packaging tests against opensuse-13 checkSles12 - Run packaging tests against sles-12 checkUbuntu1204 - Run packaging tests against ubuntu-1204 checkUbuntu1404 - Run packaging tests against ubuntu-1404 checkUbuntu1504 - Run packaging tests against ubuntu-1504 Vagrant ------- smokeTestCentos6 - Smoke test the centos-6 VM smokeTestCentos7 - Smoke test the centos-7 VM smokeTestDebian8 - Smoke test the debian-8 VM smokeTestFedora22 - Smoke test the fedora-22 VM smokeTestOel7 - Smoke test the oel-7 VM smokeTestOpensuse13 - Smoke test the opensuse-13 VM smokeTestSles12 - Smoke test the sles-12 VM smokeTestUbuntu1204 - Smoke test the ubuntu-1204 VM smokeTestUbuntu1404 - Smoke test the ubuntu-1404 VM smokeTestUbuntu1504 - Smoke test the ubuntu-1504 VM vagrantHaltCentos6 - Shutdown the vagrant VM running centos-6 vagrantHaltCentos7 - Shutdown the vagrant VM running centos-7 vagrantHaltDebian8 - Shutdown the vagrant VM running debian-8 vagrantHaltFedora22 - Shutdown the vagrant VM running fedora-22 vagrantHaltOel7 - Shutdown the vagrant VM running oel-7 vagrantHaltOpensuse13 - Shutdown the vagrant VM running opensuse-13 vagrantHaltSles12 - Shutdown the vagrant VM running sles-12 vagrantHaltUbuntu1204 - Shutdown the vagrant VM running ubuntu-1204 vagrantHaltUbuntu1404 - Shutdown the vagrant VM running ubuntu-1404 vagrantHaltUbuntu1504 - Shutdown the vagrant VM running ubuntu-1504 vagrantSmokeTest - Smoke test some representative distros from the Vagrantfile vagrantSmokeTestAllDistros - Smoke test all distros from the Vagrantfile vagrantUpCentos6 - Startup a vagrant VM running centos-6 vagrantUpCentos7 - Startup a vagrant VM running centos-7 vagrantUpDebian8 - Startup a vagrant VM running debian-8 vagrantUpFedora22 - Startup a vagrant VM running fedora-22 vagrantUpOel7 - Startup a vagrant VM running oel-7 vagrantUpOpensuse13 - Startup a vagrant VM running opensuse-13 vagrantUpSles12 - Startup a vagrant VM running sles-12 vagrantUpUbuntu1204 - Startup a vagrant VM running ubuntu-1204 vagrantUpUbuntu1404 - Startup a vagrant VM running ubuntu-1404 vagrantUpUbuntu1504 - Startup a vagrant VM running ubuntu-1504 It does not make the "check" task depend on "checkPackages" so running the vagrant tests is still optional. They are slow and depend on vagrant and virtualbox. The Package Verification tasks are useful for testing individual distros. The Vagrant tasks are listed in `gradle tasks` primarily for discoverability.
2015-11-02 12:40:47 -05:00
echo "==> Updating repository"
#{update_command} || true
touch #{update_tracking_file}
fi
[test] Gradle-ify vagrant tests This gets the tar and tar_plugins tests working in gradle. It does so by adding a subproject, qa/vagrant, which adds the following tasks: Verification ------------ checkPackages - Check the packages against a representative sample of the linux distributions we have in our Vagrantfile checkPackagesAllDistros - Check the packages against all the linux distributions we have in our Vagrantfile Package Verification -------------------- checkCentos6 - Run packaging tests against centos-6 checkCentos7 - Run packaging tests against centos-7 checkDebian8 - Run packaging tests against debian-8 checkFedora22 - Run packaging tests against fedora-22 checkOel7 - Run packaging tests against oel-7 checkOpensuse13 - Run packaging tests against opensuse-13 checkSles12 - Run packaging tests against sles-12 checkUbuntu1204 - Run packaging tests against ubuntu-1204 checkUbuntu1404 - Run packaging tests against ubuntu-1404 checkUbuntu1504 - Run packaging tests against ubuntu-1504 Vagrant ------- smokeTestCentos6 - Smoke test the centos-6 VM smokeTestCentos7 - Smoke test the centos-7 VM smokeTestDebian8 - Smoke test the debian-8 VM smokeTestFedora22 - Smoke test the fedora-22 VM smokeTestOel7 - Smoke test the oel-7 VM smokeTestOpensuse13 - Smoke test the opensuse-13 VM smokeTestSles12 - Smoke test the sles-12 VM smokeTestUbuntu1204 - Smoke test the ubuntu-1204 VM smokeTestUbuntu1404 - Smoke test the ubuntu-1404 VM smokeTestUbuntu1504 - Smoke test the ubuntu-1504 VM vagrantHaltCentos6 - Shutdown the vagrant VM running centos-6 vagrantHaltCentos7 - Shutdown the vagrant VM running centos-7 vagrantHaltDebian8 - Shutdown the vagrant VM running debian-8 vagrantHaltFedora22 - Shutdown the vagrant VM running fedora-22 vagrantHaltOel7 - Shutdown the vagrant VM running oel-7 vagrantHaltOpensuse13 - Shutdown the vagrant VM running opensuse-13 vagrantHaltSles12 - Shutdown the vagrant VM running sles-12 vagrantHaltUbuntu1204 - Shutdown the vagrant VM running ubuntu-1204 vagrantHaltUbuntu1404 - Shutdown the vagrant VM running ubuntu-1404 vagrantHaltUbuntu1504 - Shutdown the vagrant VM running ubuntu-1504 vagrantSmokeTest - Smoke test some representative distros from the Vagrantfile vagrantSmokeTestAllDistros - Smoke test all distros from the Vagrantfile vagrantUpCentos6 - Startup a vagrant VM running centos-6 vagrantUpCentos7 - Startup a vagrant VM running centos-7 vagrantUpDebian8 - Startup a vagrant VM running debian-8 vagrantUpFedora22 - Startup a vagrant VM running fedora-22 vagrantUpOel7 - Startup a vagrant VM running oel-7 vagrantUpOpensuse13 - Startup a vagrant VM running opensuse-13 vagrantUpSles12 - Startup a vagrant VM running sles-12 vagrantUpUbuntu1204 - Startup a vagrant VM running ubuntu-1204 vagrantUpUbuntu1404 - Startup a vagrant VM running ubuntu-1404 vagrantUpUbuntu1504 - Startup a vagrant VM running ubuntu-1504 It does not make the "check" task depend on "checkPackages" so running the vagrant tests is still optional. They are slow and depend on vagrant and virtualbox. The Package Verification tasks are useful for testing individual distros. The Vagrant tasks are listed in `gradle tasks` primarily for discoverability.
2015-11-02 12:40:47 -05:00
echo "==> Installing $1"
if [ #{install_command_retries} -eq 0 ]
then
#{install_command} $1
else
retry_installcommand $1 #{install_command_retries}
fi
}
ensure() {
installed $1 || install $1
}
#{extra}
installed java || {
echo "==> Java is not installed on vagrant box ${config.vm.box}"
return 1
}
ensure tar
ensure curl
ensure unzip
installed bats || {
# Bats lives in a git repository....
ensure git
[test] Gradle-ify vagrant tests This gets the tar and tar_plugins tests working in gradle. It does so by adding a subproject, qa/vagrant, which adds the following tasks: Verification ------------ checkPackages - Check the packages against a representative sample of the linux distributions we have in our Vagrantfile checkPackagesAllDistros - Check the packages against all the linux distributions we have in our Vagrantfile Package Verification -------------------- checkCentos6 - Run packaging tests against centos-6 checkCentos7 - Run packaging tests against centos-7 checkDebian8 - Run packaging tests against debian-8 checkFedora22 - Run packaging tests against fedora-22 checkOel7 - Run packaging tests against oel-7 checkOpensuse13 - Run packaging tests against opensuse-13 checkSles12 - Run packaging tests against sles-12 checkUbuntu1204 - Run packaging tests against ubuntu-1204 checkUbuntu1404 - Run packaging tests against ubuntu-1404 checkUbuntu1504 - Run packaging tests against ubuntu-1504 Vagrant ------- smokeTestCentos6 - Smoke test the centos-6 VM smokeTestCentos7 - Smoke test the centos-7 VM smokeTestDebian8 - Smoke test the debian-8 VM smokeTestFedora22 - Smoke test the fedora-22 VM smokeTestOel7 - Smoke test the oel-7 VM smokeTestOpensuse13 - Smoke test the opensuse-13 VM smokeTestSles12 - Smoke test the sles-12 VM smokeTestUbuntu1204 - Smoke test the ubuntu-1204 VM smokeTestUbuntu1404 - Smoke test the ubuntu-1404 VM smokeTestUbuntu1504 - Smoke test the ubuntu-1504 VM vagrantHaltCentos6 - Shutdown the vagrant VM running centos-6 vagrantHaltCentos7 - Shutdown the vagrant VM running centos-7 vagrantHaltDebian8 - Shutdown the vagrant VM running debian-8 vagrantHaltFedora22 - Shutdown the vagrant VM running fedora-22 vagrantHaltOel7 - Shutdown the vagrant VM running oel-7 vagrantHaltOpensuse13 - Shutdown the vagrant VM running opensuse-13 vagrantHaltSles12 - Shutdown the vagrant VM running sles-12 vagrantHaltUbuntu1204 - Shutdown the vagrant VM running ubuntu-1204 vagrantHaltUbuntu1404 - Shutdown the vagrant VM running ubuntu-1404 vagrantHaltUbuntu1504 - Shutdown the vagrant VM running ubuntu-1504 vagrantSmokeTest - Smoke test some representative distros from the Vagrantfile vagrantSmokeTestAllDistros - Smoke test all distros from the Vagrantfile vagrantUpCentos6 - Startup a vagrant VM running centos-6 vagrantUpCentos7 - Startup a vagrant VM running centos-7 vagrantUpDebian8 - Startup a vagrant VM running debian-8 vagrantUpFedora22 - Startup a vagrant VM running fedora-22 vagrantUpOel7 - Startup a vagrant VM running oel-7 vagrantUpOpensuse13 - Startup a vagrant VM running opensuse-13 vagrantUpSles12 - Startup a vagrant VM running sles-12 vagrantUpUbuntu1204 - Startup a vagrant VM running ubuntu-1204 vagrantUpUbuntu1404 - Startup a vagrant VM running ubuntu-1404 vagrantUpUbuntu1504 - Startup a vagrant VM running ubuntu-1504 It does not make the "check" task depend on "checkPackages" so running the vagrant tests is still optional. They are slow and depend on vagrant and virtualbox. The Package Verification tasks are useful for testing individual distros. The Vagrant tasks are listed in `gradle tasks` primarily for discoverability.
2015-11-02 12:40:47 -05:00
echo "==> Installing bats"
git clone https://github.com/sstephenson/bats /tmp/bats
# Centos doesn't add /usr/local/bin to the path....
/tmp/bats/install.sh /usr
rm -rf /tmp/bats
}
installed gradle || {
echo "==> Installing Gradle"
curl -sS -o /tmp/gradle.zip -L https://services.gradle.org/distributions/gradle-3.3-bin.zip
unzip /tmp/gradle.zip -d /opt
rm -rf /tmp/gradle.zip
ln -s /opt/gradle-3.3/bin/gradle /usr/bin/gradle
# make nfs mounted gradle home dir writeable
chown vagrant:vagrant /home/vagrant/.gradle
}
cat \<\<VARS > /etc/profile.d/elasticsearch_vars.sh
export ZIP=/elasticsearch/distribution/zip/build/distributions
export TAR=/elasticsearch/distribution/tar/build/distributions
export RPM=/elasticsearch/distribution/rpm/build/distributions
export DEB=/elasticsearch/distribution/deb/build/distributions
Add Vagrant Gradle plugin This commit changes the current :elactisearch:qa:vagrant build file and transforms it into a Gradle plugin in order to reuse it in other projects. Most of the code from the build.gradle file has been moved into the VagrantTestPlugin class. To avoid duplicated VMs when running vagrant tests, the Gradle plugin sets the following environment variables before running vagrant commands: VAGRANT_CWD: absolute path to the folder that contains the Vagrantfile VAGRANT_PROJECT_DIR: absolute path to the Gradle project that use the VagrantTestPlugin The VAGRANT_PROJECT_DIR is used to share project folders and files with the vagrant VM. These folders and files are exported when running the task `gradle vagrantSetUp` which: - collects all project archives dependencies and copies them into `${project.buildDir}/bats/archives` - copy all project bats testing files from 'src/test/resources/packaging/tests' into `${project.buildDir}/bats/tests` - copy all project bats utils files from 'src/test/resources/packaging/utils' into `${project.buildDir}/bats/utils` It is also possible to inherit and grab the archives/tests/utils files from project dependencies using the plugin configuration: apply plugin: 'elasticsearch.vagrant' esvagrant { inheritTestUtils true|false inheritTestArchives true|false inheritTests true|false } dependencies { // Inherit Bats test utils from :qa:vagrant project bats project(path: ':qa:vagrant', configuration: 'bats') } The folders `${project.buildDir}/bats/archives`, `${project.buildDir}/bats/tests` and `${project.buildDir}/bats/utils` are then exported to the vagrant VMs and mapped to the BATS_ARCHIVES, BATS_TESTS and BATS_UTILS environnement variables. The following Gradle tasks have also be renamed: * gradle vagrantSetUp This task copies all the necessary files to the project build directory (was `prepareTestRoot`) * gradle vagrantSmokeTest This task starts the VMs and echoes a "Hello world" within each VM (was: `smokeTest`)
2016-10-19 04:01:13 -04:00
export BATS=/project/build/bats
export BATS_UTILS=/project/build/bats/utils
export BATS_TESTS=/project/build/bats/tests
export BATS_ARCHIVES=/project/build/bats/archives
export GRADLE_HOME=/opt/gradle-3.3
VARS
cat \<\<SUDOERS_VARS > /etc/sudoers.d/elasticsearch_vars
Defaults env_keep += "ZIP"
Defaults env_keep += "TAR"
Defaults env_keep += "RPM"
Defaults env_keep += "DEB"
Defaults env_keep += "BATS"
Defaults env_keep += "BATS_UTILS"
Defaults env_keep += "BATS_TESTS"
Defaults env_keep += "BATS_ARCHIVES"
SUDOERS_VARS
chmod 0440 /etc/sudoers.d/elasticsearch_vars
SHELL
end