In hamcrest 2.1 warnings for unchecked varargs were fixed by hamcrest using @SafeVarargs for those matchers where this warning occurred.
This PR is aimed to remove these annotations when Matchers.contains ,Matchers.containsInAnyOrder or Matchers.hasItems was used
backport #41528
This commit changes the way token ids are hashed so that the output is
url safe without requiring encoding. This follows the pattern that we
use for document ids that are autogenerated, see UUIDs and the
associated classes for additional details.
The date_histogram accepts an interval which can be either a calendar
interval (DST-aware, leap seconds, arbitrary length of months, etc) or
fixed interval (strict multiples of SI units). Unfortunately this is inferred
by first trying to parse as a calendar interval, then falling back to fixed
if that fails.
This leads to confusing arrangement where `1d` == calendar, but
`2d` == fixed. And if you want a day of fixed time, you have to
specify `24h` (e.g. the next smallest unit). This arrangement is very
error-prone for users.
This PR adds `calendar_interval` and `fixed_interval` parameters to any
code that uses intervals (date_histogram, rollup, composite, datafeed, etc).
Calendar only accepts calendar intervals, fixed accepts any combination of
units (meaning `1d` can be used to specify `24h` in fixed time), and both
are mutually exclusive.
The old interval behavior is deprecated and will throw a deprecation warning.
It is also mutually exclusive with the two new parameters. In the future the
old dual-purpose interval will be removed.
The change applies to both REST and java clients.
This commit updates the default ciphers and TLS protocols that are used
when the runtime JDK supports them. New cipher support has been
introduced in JDK 11 and 12 along with performance fixes for AES GCM.
The ciphers are ordered with PFS ciphers being most preferred, then
AEAD ciphers, and finally those with mainstream hardware support. When
available stronger encryption is preferred for a given cipher.
This is a backport of #41385 and #41808. There are known JDK bugs with
TLSv1.3 that have been fixed in various versions. These are:
1. The JDK's bundled HttpsServer will endless loop under JDK11 and JDK
12.0 (Fixed in 12.0.1) based on the way the Apache HttpClient performs
a close (half close).
2. In all versions of JDK 11 and 12, the HttpsServer will endless loop
when certificates are not trusted or another handshake error occurs. An
email has been sent to the openjdk security-dev list and #38646 is open
to track this.
3. In JDK 11.0.2 and prior there is a race condition with session
resumption that leads to handshake errors when multiple concurrent
handshakes are going on between the same client and server. This bug
does not appear when client authentication is in use. This is
JDK-8213202, which was fixed in 11.0.3 and 12.0.
4. In JDK 11.0.2 and prior there is a bug where resumed TLS sessions do
not retain peer certificate information. This is JDK-8212885.
The way these issues are addressed is that the current java version is
checked and used to determine the supported protocols for tests that
provoke these issues.
testclusters detect from settings that security is enabled
if a user is not specified using the DSL introduced in this PR, a default one is created
the appropriate wait conditions are used authenticating with the first user defined in the DSL ( or the default user ).
an example DSL to create a user is user username:"test_user" password:"x-pack-test-password" role: "superuser" all keys are optional and default to the values shown in this example
This commit introduces the `.security-tokens` and `.security-tokens-7`
alias-index pair. Because index snapshotting is at the index level granularity
(ie you cannot snapshot a subset of an index) snapshoting .`security` had
the undesirable effect of storing ephemeral security tokens. The changes
herein address this issue by moving tokens "seamlessly" (without user
intervention) to another index, so that a "Security Backup" (ie snapshot of
`.security`) would not be bloated by ephemeral data.
This is related to #36652. We intend to deprecate a number of transport
settings in 7.x and remove them in 8.0. This commit removes the string
usages of these settings.
This commit removes xpack dependencies of many xpack qa modules.
(for some qa modules this will require some more work)
The reason behind this change is that qa rest modules should not depend
on the x-pack plugins, because the plugins are an implementation detail and
the tests should only know about the rest interface and qa cluster that is
being tested.
Also some qa modules rely on xpack plugins and hlrc (which is a valid
dependency for rest qa tests) creates a cyclic dependency and this is
something that we should avoid. Also Eclipse can't handle gradle cyclic
dependencies (see #41064).
* don't copy xpack-core's plugin property into the test resource of qa
modules. Otherwise installing security manager fails, because it tries
to find the XPackPlugin class.
This commit adds an OpenID Connect authentication realm to
elasticsearch. Elasticsearch (with the assistance of kibana or
another web component) acts as an OpenID Connect Relying
Party and supports the Authorization Code Grant and Implicit
flows as described in http://ela.st/oidc-spec. It adds support
for consuming and verifying signed ID Tokens, both RP
initiated and 3rd party initiated Single Sign on and RP
initiated signle logout.
It also adds an OpenID Connect Provider in the idp-fixture to
be used for the associated integration tests.
This is a backport of #40674
Backport of (#41087)
* Use environment settings instead of state settings for Watcher config
Prior to this we used the settings from cluster state to see whether ILM was
enabled of disabled, however, these settings don't accurately reflect the
`xpack.ilm.enabled` setting in `elasticsearch.yml`.
This commit changes to using the `Environment` settings, which correctly reflect
the ILM enabled setting.
Resolves#41042
* moved hlrc parsing tests from xpack to hlrc module and removed dependency on hlrc from xpack core
* deprecated old base test class
* added deprecated jdoc tag
* split test between xpack-core part and hlrc part
* added lang-mustache test dependency, this previously came in via
hlrc dependency.
* added hlrc dependency on a qa module
* duplicated ClusterPrivilegeName class in xpack-core, since x-pack
core no longer has a dependency on hlrc.
* replace ClusterPrivilegeName usages with string literals
* moved tests to dedicated to hlrc packages in order to remove Hlrc part from the name and make sure to use imports instead of full qualified class where possible
* remove ESTestCase. from method invocation and use method directly,
because these tests indirectly extend from ESTestCase
* Replace usages RandomizedTestingTask with built-in Gradle Test (#40978)
This commit replaces the existing RandomizedTestingTask and supporting code with Gradle's built-in JUnit support via the Test task type. Additionally, the previous workaround to disable all tasks named "test" and create new unit testing tasks named "unitTest" has been removed such that the "test" task now runs unit tests as per the normal Gradle Java plugin conventions.
(cherry picked from commit 323f312bbc829a63056a79ebe45adced5099f6e6)
* Fix forking JVM runner
* Don't bump shadow plugin version
* Avoid sharing source directories as it breaks intellij
* Subprojects share main project output classes directory
* Fix jar hell
* Fix sql security with ssl integ tests
* Relax dependency ordering rule so we don't explode on cycles
Many gradle projects specifically use the -try exclude flag, because
there are many cases where auto-closeable resource ignore is never
referenced in body of corresponding try statement. Suppressing this
warning specifically in each case that it happens using
`@SuppressWarnings("try")` would be very verbose.
This change removes `-try` from any gradle project and adds it to the
build plugin. Also this change removes exclude flags from gradle projects
that is already specified in build plugin (for example -deprecation).
Relates to #40366
By default, in integ tests we wait for the standalone cluster to start
by using the ant Get task to retrieve the cluster health endpoint.
However the ant task has no facilities for customising the trusted
CAs for a https resource, so if the integ test cluster has TLS enabled
on the http interface (using a custom CA) we need a separate utility
for that purpose.
Backport of: #40573
* [ML] Addressing bug streaming DatafeedConfig aggs from (<= 6.5.4) -> 6.7.0 (#40610)
* Addressing stream failure and adding tests to catch such in the future
* Add aggs to full cluster restart tests
* Test BWC for datafeeds with and without aggs
The wire serialisation is different for null/non-null
aggs, so it's worth testing both cases.
* Fixing bwc test, removing types
* Fixing BWC test for datafeed
* Update 40_ml_datafeed_crud.yml
* Update build.gradle
This change removes the variants of the rolling upgrade and full
cluster restart tests that use or do not use a system key. These tests
were added during 5.x when the system key was still used for security
and now the system key is only used as the watcher encryption key so
duplicating rolling upgrade and full cluster restarts is not needed.
The change here removes the subprojects for testing these scenarios and
defaults to always run with the watcher sensitive values encrypted for
these tests.
Replaces the vagrant based kerberos fixtures with docker based test fixtures plugin.
The configuration is now entirely static on the docker side and no longer driven by Gradle,
also two different services are being configured since there are two different consumers of the fixture that can run in parallel and require different configurations.
This change removes the use of hardcoded port values for the
idp-fixture in favor of the mapped ephemeral ports. This should prevent
failures due to port conflicts in CI.
The Migration Assistance API has been functionally replaced by the
Deprecation Info API, and the Migration Upgrade API is not used for the
transition from ES 6.x to 7.x, and does not need to be kept around to
repair indices that were not properly upgraded before upgrading the
cluster, as was the case in 6.
This commit enables full-cluster-restart and rolling-upgrade tests
to run with nodes using a JVM in fips approved only node by using
PEM key material instead of a JKS for the transport layer in that
case.
The change replaces the Vagrant box based fixture with a fixture
based on docker compose and 2 docker images, one for an openldap
server and one for a Shibboleth SAML Identity Provider.
The configuration of both openldap and shibboleth is identical to
the previous one, in order to minimize required changes in the
tests
This change is a backport of #39252
- Fixes TokenBackwardsCompatibilityIT: Existing tests seemed to made
the assumption that in the oneThirdUpgraded stage the master node
will be on the old version and in the twoThirdsUpgraded stage, the
master node will be one of the upgraded ones. However, there is no
guarantee that the master node in any of the states will or will
not be one of the upgraded ones.
This class now tests:
- That we can generate and consume tokens before we start the
rolling upgrade.
- That we can consume tokens generated in the old cluster during
all the stages of the rolling upgrade.
- That while on a mixed cluster, when/if the master node is
upgraded, we can generate, consume and refresh a token
- That after the rolling upgrade, we can consume a token
generated in an old cluster and can invalidate it so that it
can't be used any more.
- Ensures that during the rolling upgrade, the upgraded nodes have
the same configuration as the old nodes. Specifically that the
file realm we use is explicitly named `file1`. This is needed
because while attempting to refresh a token in a mixed cluster
we might create a token hitting an old node and attempt to refresh
it hitting a new node. If the file realm name is not the same, the
refresh will be seen as being made by a "different" client, and
will, thus, fail.
- Renames the Authentication variable we check while refreshing a
token to be clientAuth in order to make the code more readable.
Some of the above were possibly causing the flakiness of #37379
* Remove Hipchat support from Watcher (#39199)
Hipchat has been shut down and has previously been deprecated in
Watcher (#39160), therefore we should remove support for these actions.
* Add migrate note
There have been intermittent failures where either
LDAP server could not be started or KDC server could
not be started causing failures during test runs.
`KdcNetwork` class from Apache kerby project does not set reuse
address to `true` on the socket so if the port that we found to be free
is in `TIME_WAIT` state it may fail to bind. As this is an internal
class for kerby, I could not find a way to extend.
This commit adds a retry loop for initialization. It will keep
trying in an await busy loop and fail after 10 seconds if not
initialized.
Closes#35982
* Disable specific locales for tests in fips mode
The Bouncy Castle FIPS provider that we use for running our tests
in fips mode has an issue with locale sensitive handling of Dates as
described in https://github.com/bcgit/bc-java/issues/405
This causes certificate validation to fail if any given test that
includes some form of certificate validation happens to run in one
of the locales. This manifested earlier in #33081 which was
handled insufficiently in #33299
This change ensures that the problematic 3 locales
* th-TH
* ja-JP-u-ca-japanese-x-lvariant-JP
* th-TH-u-nu-thai-x-lvariant-TH
will not be used when running our tests in a FIPS 140 JVM. It also
reverts #33299
* Fix#38623 remove xpack namespace REST API
Except for xpack.usage and xpack.info API's, this moves the last remaining API's out of the xpack namespace
* rename xpack api's inside inside the files as well
* updated yaml tests references to xpack namespaces api's
* update callsApi calls in the IT subclasses
* make sure docs testing does not use xpack namespaced api's
* fix leftover xpack namespaced method names in docs/build.gradle
* found another leftover reference
(cherry picked from commit ccb5d934363c37506b76119ac050a254fa80b5e7)
Follow index in follow cluster that follows an index in the leader cluster and another
follow index in the leader index that follows that index in the follow cluster.
During the upgrade index following is paused and after the upgrade
index following is resumed and then verified index following works as expected.
Relates to #38037
The rest of `CCRIT` is now no longer relevant, because the remaining
test tests the same of the index following test in the rolling upgrade
multi cluster module.
Added `tests.upgrade_from_version` version to test. It is not needed
in this branch, but is in 6.7 branch.
Closes#37231
* Add rolling upgrade multi cluster test module (#38277)
This test starts 2 clusters, each with 3 nodes.
First the leader cluster is started and tests are run against it and
then the follower cluster is started and tests execute against this two cluster.
Then the follower cluster is upgraded, one node at a time.
After that the leader cluster is upgraded, one node at a time.
Every time a node is upgraded tests are ran while both clusters are online.
(and either leader cluster has mixed node versions or the follower cluster)
This commit only tests CCR index following, but could be used for CCS tests as well.
In particular for CCR, unidirectional index following is tested during a rolling upgrade.
During the test several indices are created and followed in the leader cluster before or
while the follower cluster is being upgraded.
This tests also verifies that attempting to follow an index in the upgraded cluster
from the not upgraded cluster fails. After both clusters are upgraded following the
index that previously failed should succeed.
Relates to #37231 and #38037
* Filter out upgraded version index settings when starting index following (#38838)
The `index.version.upgraded` and `index.version.upgraded_string` are likely
to be different between leader and follower index. In the event that
a follower index gets restored on a upgraded node while the leader index
is still on non-upgraded nodes.
Closes#38835
Instead of using `WarningsHandler.PERMISSIVE`, we only match warnings
that are due to types removal.
This PR also renames `allowTypeRemovalWarnings` to `allowTypesRemovalWarnings`.
Relates to #37920.
Mark Vieira
Jay Modi
Przemyslaw Gomulka
Zachary Tong
Alpar Torok
Ioannis Kakavas
Jason Tedor
Albert Zaharovits
Alpar Torok
Tim Brooks
Martijn van Groningen
Ioannis Kakavas
Lee Hinman
Tim Vernum
Benjamin Trent
Ryan Ernst
jaymode
Gordon Brown
David Kyle
Costin Leau
Yogesh Gaikwad
Martijn Laarman
Julie Tibshirani