The Has Privileges API allows to tap into the authorization process, to validate
privileges without actually running the operations to be authorized. This commit
fixes a bug, in which the Has Privilege API returned spurious results when checking
for index privileges over restricted indices (currently .security, .security-6,
.security-7). The actual authorization process is not affected by the bug.
This adds a new `role_templates` field to role mappings that is an
alternative to the existing roles field.
These templates are evaluated at runtime to determine which roles should be
granted to a user.
For example, it is possible to specify:
"role_templates": [
{ "template":{ "source": "_user_{{username}}" } }
]
which would mean that every user is assigned to their own role based on
their username.
You may not specify both roles and role_templates in the same role
mapping.
This commit adds support for templates to the role mapping API, the role
mapping engine, the Java high level rest client, and Elasticsearch
documentation.
Due to the lack of caching in our role mapping store, it is currently
inefficient to use a large number of templated role mappings. This will be
addressed in a future change.
Backport of: #39984, #40504
X-Pack security supports built-in authentication service
`token-service` that allows access tokens to be used to
access Elasticsearch without using Basic authentication.
The tokens are generated by `token-service` based on
OAuth2 spec. The access token is a short-lived token
(defaults to 20m) and refresh token with a lifetime of 24 hours,
making them unsuitable for long-lived or recurring tasks where
the system might go offline thereby failing refresh of tokens.
This commit introduces a built-in authentication service
`api-key-service` that adds support for long-lived tokens aka API
keys to access Elasticsearch. The `api-key-service` is consulted
after `token-service` in the authentication chain. By default,
if TLS is enabled then `api-key-service` is also enabled.
The service can be disabled using the configuration setting.
The API keys:-
- by default do not have an expiration but expiration can be
configured where the API keys need to be expired after a
certain amount of time.
- when generated will keep authentication information of the user that
generated them.
- can be defined with a role describing the privileges for accessing
Elasticsearch and will be limited by the role of the user that
generated them
- can be invalidated via invalidation API
- information can be retrieved via a get API
- that have been expired or invalidated will be retained for 1 week
before being deleted. The expired API keys remover task handles this.
Following are the API key management APIs:-
1. Create API Key - `PUT/POST /_security/api_key`
2. Get API key(s) - `GET /_security/api_key`
3. Invalidate API Key(s) `DELETE /_security/api_key`
The API keys can be used to access Elasticsearch using `Authorization`
header, where the auth scheme is `ApiKey` and the credentials, is the
base64 encoding of API key Id and API key separated by a colon.
Example:-
```
curl -H "Authorization: ApiKey YXBpLWtleS1pZDphcGkta2V5" http://localhost:9200/_cluster/health
```
Closes#34383
* move watcher to seq# occ
* top level set
* fix parsing and missing setters
* share toXContent for PutResponse and rest end point
* fix redacted password
* fix username reference
* fix deactivate-watch.asciidoc have seq no references
* add seq# + term to activate-watch.asciidoc
* more doc fixes
Types have been deprecated and this commit removes the documentation
for specifying types in the index action, and search input/transform.
Relates #37594#35190
This grants the capability to grant privileges over certain restricted
indices (.security and .security-6 at the moment).
It also removes the special status of the superuser role.
IndicesPermission.Group is extended by adding the `allow_restricted_indices`
boolean flag. By default the flag is false. When it is toggled, you acknowledge
that the indices under the scope of the permission group can cover the
restricted indices as well. Otherwise, by default, restricted indices are ignored
when granting privileges, thus rendering them hidden for authorization purposes.
This effectively adds a confirmation "check-box" for roles that might grant
privileges to restricted indices.
The "special status" of the superuser role has been removed and coded as
any other role:
```
new RoleDescriptor("superuser",
new String[] { "all" },
new RoleDescriptor.IndicesPrivileges[] {
RoleDescriptor.IndicesPrivileges.builder()
.indices("*")
.privileges("all")
.allowRestrictedIndices(true)
// this ----^
.build() },
new RoleDescriptor.ApplicationResourcePrivileges[] {
RoleDescriptor.ApplicationResourcePrivileges.builder()
.application("*")
.privileges("*")
.resources("*")
.build()
},
null, new String[] { "*" },
MetadataUtils.DEFAULT_RESERVED_METADATA,
Collections.emptyMap());
```
In the context of the Backup .security work, this allows the creation of a
"curator role" that would permit listing (get settings) for all indices
(including the restricted ones). That way the curator role would be able to
ist and snapshot all indices, but not read or restore any of them.
Supersedes #36765
Relates #34454
This commit removes the fallback for SSL settings. While this may be
seen as a non user friendly change, the intention behind this change
is to simplify the reasoning needed to understand what is actually
being used for a given SSL configuration. Each configuration now needs
to be explicitly specified as there is no global configuration or
fallback to some other configuration.
Closes#29797
This change:
- Adds functionality to invalidate all (refresh+access) tokens for all users of a realm
- Adds functionality to invalidate all (refresh+access)tokens for a user in all realms
- Adds functionality to invalidate all (refresh+access) tokens for a user in a specific realm
- Changes the response format for the invalidate token API to contain information about the
number of the invalidated tokens and possible errors that were encountered.
- Updates the API Documentation
After back-porting to 6.x, the `created` field will be removed from master as a field in the
response
Resolves: #35115
Relates: #34556
* This commit is part of our plan to deprecate and ultimately remove the use of _xpack in the REST APIs.
- REST API docs
- HLRC docs and doc tests
- Handle REST actions with deprecation warnings
- Changed endpoints in rest-api-spec and relevant file names
- Add the authentication realm and lookup realm name and type in the response for the _authenticate API
- The authentication realm is set as the lookup realm too (instead of setting the lookup realm to null or empty ) when no lookup realm is used.
PR #35242 formalised support for the password_hash field in the body
of the Put User security API.
Since this field is now validated and tested, it can also be
documented.
The Put User API also supports a "refresh" query parameter that was
not documented. This commit adds it to the docs.
* Watcher: fix metric stats names
The current watcher stats metric names doesn't match the current
documentation. This commit fixes the behavior of `queued_watches`
metric, deprecates `pending_watches` metric and adds `current_watches`
to match the documented behavior. It also fixes the documentation, which
introduced `executing_watches` metric that was never added.
Fixes#34865
This enables Elasticsearch to use the JVM-wide configured
PKCS#11 token as a keystore or a truststore for its TLS configuration.
The JVM is assumed to be configured accordingly with the appropriate
Security Provider implementation that supports PKCS#11 tokens.
For the PKCS#11 token to be used as a keystore or a truststore for an
SSLConfiguration, the .keystore.type or .truststore.type must be
explicitly set to pkcs11 in the configuration.
The fact that the PKCS#11 token configuration is JVM wide implies that
there is only one available keystore and truststore that can be used by TLS
configurations in Elasticsearch.
The PIN for the PKCS#11 token can be set as a truststore parameter in
Elasticsearch or as a JVM parameter ( -Djavax.net.ssl.trustStorePassword).
The basic goal of enabling PKCS#11 token support is to allow PKCS#11-NSS in
FIPS mode to be used as a FIPS 140-2 enabled Security Provider.
This change removes the wrapping of the created field in the put user
response. The created field was added as a top level field in #32332,
while also still being wrapped within the `user` object of the
response. Since the value is available in both formats in 6.x, we can
remove the wrapped version for 7.0.
This commit adds a security client to the high level rest client, which
includes an implementation for the put user api. As part of these
changes, a new request and response class have been added that are
specific to the high level rest client. One change here is that the response
was previously wrapped inside a user object. The plan is to remove this
wrapping and this PR adds an unwrapped response outside of the user
object so we can remove the user object later on.
See #29827
We need to limit the search request aggregations to whole multiples
of the configured interval for both histogram and date_histogram.
Otherwise, agg buckets won't overlap with the rolled up buckets
and the results will be incorrect.
For histogram, the validation is very simple: request must be >= the config,
and modulo evenly.
Dates are more tricky.
- If both request and config are fixed dates, we can convert to millis
and treat them just like the histo
- If both are calendar, we make sure the request is >= the config with
a static lookup map that ranks the calendar values relatively. All
calendar units are "singles", so they are evenly divisible already
- We disallow any other combination (one fixed, one calendar, etc)
This change adds support for the client credentials grant type to the
token api. The client credentials grant allows for a client to
authenticate with the authorization server and obtain a token to access
as itself. Per RFC 6749, a refresh token should not be included with
the access token and as such a refresh token is not issued when the
client credentials grant is used.
The addition of the client credentials grant will allow users
authenticated with mechanisms such as kerberos or PKI to obtain a token
that can be used for subsequent access.
If a search request doesn't contain aggs (or an empty agg object),
we should just retun an empty response. This is how the normal search
API works if you specify zero hits and empty aggs.
The existing behavior throws an exception because it tries to send
an empty msearch.
Closes#32256
* [DOCS] Add configurable password hashing docs
Adds documentation about the newly introduced configuration option
for setting the password hashing algorithm to be used for the users
cache and for storing credentials for the native and file realm.
- Missing links to new IndexCaps API
- Incorrect security permissions on IndexCaps API
- GetJobs API must supply a job (or `_all`), omitting throws error
- Link to search/agg limitations from RollupSearch API
- Tweak URLs in quick reference
- Formatting of overview page
Previously, we were using a simple CRC32 for the IDs of rollup documents.
This is a very poor choice however, since 32bit IDs leads to collisions
between documents very quickly.
This commit moves Rollups over to a 128bit ID. The ID is a concatenation
of all the keys in the document (similar to the rolling CRC before),
hashed with 128bit Murmur3, then base64 encoded. Finally, the job
ID and a delimiter (`$`) are prepended to the ID.
This gurantees that there are 128bits per-job. 128bits should
essentially remove all chances of collisions, and the prepended
job ID means that _if_ there is a collision, it stays "within"
the job.
BWC notes:
We can only upgrade the ID scheme after we know there has been a good
checkpoint during indexing. We don't rely on a STARTED/STOPPED
status since we can't guarantee that resulted from a real checkpoint,
or other state. So we only upgrade the ID after we have reached
a checkpoint state during an active index run, and only after the
checkpoint has been confirmed.
Once a job has been upgraded and checkpointed, the version increments
and the new ID is used in the future. All new jobs use the
new ID from the start
This commit introduces "Application Privileges" to the X-Pack security
model.
Application Privileges are managed within Elasticsearch, and can be
tested with the _has_privileges API, but do not grant access to any
actions or resources within Elasticsearch. Their purpose is to allow
applications outside of Elasticsearch to represent and store their own
privileges model within Elasticsearch roles.
Access to manage application privileges is handled in a new way that
grants permission to specific application names only. This lays the
foundation for more OLS on cluster privileges, which is implemented by
allowing a cluster permission to inspect not just the action being
executed, but also the request to which the action is applied.
To support this, a "conditional cluster privilege" is introduced, which
is like the existing cluster privilege, except that it has a Predicate
over the request as well as over the action name.
Specifically, this adds
- GET/PUT/DELETE actions for defining application level privileges
- application privileges in role definitions
- application privileges in the has_privileges API
- changes to the cluster permission class to support checking of request
objects
- a new "global" element on role definition to provide cluster object
level security (only for manage application privileges)
- changes to `kibana_user`, `kibana_dashboard_only_user` and
`kibana_system` roles to use and manage application privileges
Closes#29820Closes#31559
Christoph Büscher
Albert Zaharovits
Ioannis Kakavas
Tim Vernum
Lisa Cawley
Shajahan Palayil
Yogesh Gaikwad
Boaz Leskes
Jake Landis
Albert Zaharovits
Jay Modi
Michael Basnight
Igor Motov
Or Bin
Zachary Tong
Zachary Tong
Dimitris Athanasiou