* Remove BlobContainer Tests against Mocks
Removing all these weird mocks as asked for by #30424.
All these tests are now part of real repository ITs and otherwise left unchanged if they had
independent tests that didn't call the `createBlobStore` method previously.
The HDFS tests also get added coverage as a side-effect because they did not have an implementation
of the abstract repository ITs.
Closes#30424
* Remove Unused Single Delete in BlobStoreRepository
There are no more production uses of the non-bulk delete or the delete that throws
on missing so this commit removes both these methods.
Only the bulk delete logic remains. Where the bulk delete was derived from single deletes,
the single delete code was inlined into the bulk delete method.
Where single delete was used in tests it was replaced by bulk deleting.
* Make BlobStoreRepository Aware of ClusterState (#49639)
This is a preliminary to #49060.
It does not introduce any substantial behavior change to how the blob store repository
operates. What it does is to add all the infrastructure changes around passing the cluster service to the blob store, associated test changes and a best effort approach to tracking the latest repository generation on all nodes from cluster state updates. This brings a slight improvement to the consistency
by which non-master nodes (or master directly after a failover) will be able to determine the latest repository generation. It does not however do any tricky checks for the situation after a repository operation
(create, delete or cleanup) that could theoretically be used to get even greater accuracy to keep this change simple.
This change does not in any way alter the behavior of the blobstore repository other than adding a better "guess" for the value of the latest repo generation and is mainly intended to isolate the actual logical change to how the
repository operates in #49060
All the implementations of `EsBlobStoreTestCase` use the exact same
bootstrap code that is also used by their implementation of
`EsBlobStoreContainerTestCase`.
This means all tests might as well live under `EsBlobStoreContainerTestCase`
saving a lot of code duplication. Also, there was no HDFS implementation for
`EsBlobStoreTestCase` which is now automatically resolved by moving the tests over
since there is a HDFS implementation for the container tests.
Backport of #48849. Update `.editorconfig` to make the Java settings the
default for all files, and then apply a 2-space indent to all `*.gradle`
files. Then reformat all the files.
This commit introduces a consistent, and type-safe manner for handling
global build parameters through out our build logic. Primarily this
replaces the existing usages of extra properties with static accessors.
It also introduces and explicit API for initialization and mutation of
any such parameters, as well as better error handling for uninitialized
or eager access of parameter values.
Closes#42042
* Remove eclipse conditionals
We used to have some meta projects with a `-test` prefix because
historically eclipse could not distinguish between test and main
source-sets and could only use a single classpath.
This is no longer the case for the past few Eclipse versions.
This PR adds the necessary configuration to correctly categorize source
folders and libraries.
With this change eclipse can import projects, and the visibility rules
are correct e.x. auto compete doesn't offer classes from test code or
`testCompile` dependencies when editing classes in `main`.
Unfortunately the cyclic dependency detection in Eclipse doesn't seem to
take the difference between test and non test source sets into account,
but since we are checking this in Gradle anyhow, it's safe to set to
`warning` in the settings. Unfortunately there is no setting to ignore
it.
This might cause problems when building since Eclipse will probably not
know the right order to build things in so more wirk might be necesarry.
This commit change the repositories base paths used in Azure/S3/GCS
integration tests so that they don't conflict with each other when tests
run in parallel on real storage services.
Closes#47202
This PR adds some restrictions around testfixtures to make sure the same service ( as defiend in docker-compose.yml ) is not shared between multiple projects.
Sharing would break running with --parallel.
Projects can still share fixtures as long as each has it;s own service within.
This is still useful to share some of the setup and configuration code of the fixture.
Project now also have to specify a service name when calling useCluster to refer to a specific service.
If this is not the case all services will be claimed and the fixture can't be shared.
For this reason fixtures have to explicitly specify if they are using themselves ( fixture and tests in the same project ).
This commit starts from the simple premise that the use of node settings
in blob store repositories is a mistake. Here we see that the node
settings are used to get default settings for store and restore throttle
rates. Yet, since there are not any node settings registered to this
effect, there can never be a default setting to fall back to there, and
so we always end up falling back to the default rate. Since this was the
only use of node settings in blob store repository, we move them. From
this, several places fall out where we were chaining settings through
only to get them to the blob store repository, so we clean these up as
well. That leaves us with the changeset in this commit.
* Repository Cleanup Endpoint (#43900)
* Snapshot cleanup functionality via transport/REST endpoint.
* Added all the infrastructure for this with the HLRC and node client
* Made use of it in tests and resolved relevant TODO
* Added new `Custom` CS element that tracks the cleanup logic.
Kept it similar to the delete and in progress classes and gave it
some (for now) redundant way of handling multiple cleanups but only allow one
* Use the exact same mechanism used by deletes to have the combination
of CS entry and increment in repository state ID provide some
concurrency safety (the initial approach of just an entry in the CS
was not enough, we must increment the repository state ID to be safe
against concurrent modifications, otherwise we run the risk of "cleaning up"
blobs that just got created without noticing)
* Isolated the logic to the transport action class as much as I could.
It's not ideal, but we don't need to keep any state and do the same
for other repository operations
(like getting the detailed snapshot shard status)
The repository-hdfs runners need to be disabled it in fips mode.
Testing done for all the tasks, dynamic created and static (integTest, integTestHa, integSecureTest, integSecureHaTest)
* We only use this method in one place in production code and can replace that with a read -> remove it to simplify the interface
* Keep it as an implementation detail in the Azure repository
Due to recent changes are done for converting `repository-hdfs` to test
clusters (#41252), the `integTestSecure*` tasks did not depend on
`secureHdfsFixture` which when running would fail as the fixture
would not be available. This commit adds the dependency of the fixture
to the task.
The `secureHdfsFixture` is a `AntFixture` which is spawned a process.
Internally it waits for 30 seconds for the resources to be made available.
For my local machine, it took almost 45 seconds to be available so I have
added the wait time as an input to the `AntFixture` defaults to 30 seconds
and set it to 60 seconds in case of secure hdfs fixture.
The integ test for secure hdfs was disabled for a long time and so
the changes done in #42090 to fix the tests are also done in this commit.
* Use ability to list child "folders" in the blob store to implement recursive delete on all stale index folders when cleaning up instead of using the diff between two `RepositoryData` instances to cover aborted deletes
* Runs after ever delete operation
* Relates #13159 (fixing most of this issues caused by unreferenced indices, leaving some meta files to be cleaned up only)
This is a prerequisite of #42189:
* Add directory delete method to blob container specific to each implementation:
* Some notes on the implementations:
* AWS + GCS: We can simply exploit the fact that both AWS and GCS return blobs lexicographically ordered which allows us to simply delete in the same order that we receive the blobs from the listing request. For AWS this simply required listing without the delimiter setting (so we get a deep listing) and for GCS the same behavior is achieved by not using the directory mode on the listing invocation. The nice thing about this is, that even for very large numbers of blobs the memory requirements are now capped nicely since we go page by page when deleting.
* For Azure I extended the parallelization to the listing calls as well and made it work recursively. I verified that this works with thread count `1` since we only block once in the initial thread and then fan out to a "graph" of child listeners that never block.
* HDFS and FS are trivial since we have directory delete methods available for them
* Enhances third party tests to ensure the new functionality works (I manually ran them for all cloud providers)
* Add Ability to List Child Containers to BlobContainer (#42653)
* Add Ability to List Child Containers to BlobContainer
* This is a prerequisite of #42189
Infra has fixed#10462 by installing `haveged` on CI workers.
This commit enables the disabled fixture and tests, and mounts
`/dev/urandom` for the container so there is enough
entropy required for kdc.
Note: hdfs-repository tests have been disabled, will raise a separate issue for it.
Closes#40624Closes#40678
We had this as a dependency for legacy dependencies that still needed
the Log4j 1.2 API. This appears to no longer be necessary, so this
commit removes this artifact as a dependency.
To remove this dependency, we had to fix a few places where we were
accidentally relying on Log4j 1.2 instead of Log4j 2 (easy to do, since
both APIs were on the compile-time classpath).
Finally, we can remove our custom Netty logger factory. This was needed
when we were on Log4j 1.2 and handled logging in our own unique
way. When we migrated to Log4j 2 we could have dropped this
dependency. However, even then Netty would still pick up Log4j 1.2 since
it was on the classpath, thus the advantage to removing this as a
dependency now.
* Remove Delete Method from BlobStore (#41619)
* The delete method on the blob store was used almost nowhere and just duplicates the delete method on the blob containers
* The fact that it provided for some recursive delete logic (that did not behave the same way on all implementations) was not used and not properly tested either
Motivated by slow snapshot deletes reported in e.g. #39656 and the fact that these likely are a contributing factor to repositories accumulating stale files over time when deletes fail to finish in time and are interrupted before they can complete.
* Makes snapshot deletion async and parallelizes some steps of the delete process that can be safely run concurrently via the snapshot thread poll
* I did not take the biggest potential speedup step here and parallelize the shard file deletion because that's probably better handled by moving to bulk deletes where possible (and can still be parallelized via the snapshot pool where it isn't). Also, I wanted to keep the size of the PR manageable.
* See https://github.com/elastic/elasticsearch/pull/39656#issuecomment-470492106
* Also, as a side effect this gives the `SnapshotResiliencyTests` a little more coverage for master failover scenarios (since parallel access to a blob store repository during deletes is now possible since a delete isn't a single task anymore).
* By adding a `ThreadPool` reference to the repository this also lays the groundwork to parallelizing shard snapshot uploads to improve the situation reported in #39657
* Replace usages RandomizedTestingTask with built-in Gradle Test (#40978)
This commit replaces the existing RandomizedTestingTask and supporting code with Gradle's built-in JUnit support via the Test task type. Additionally, the previous workaround to disable all tasks named "test" and create new unit testing tasks named "unitTest" has been removed such that the "test" task now runs unit tests as per the normal Gradle Java plugin conventions.
(cherry picked from commit 323f312bbc829a63056a79ebe45adced5099f6e6)
* Fix forking JVM runner
* Don't bump shadow plugin version
The hdfs-fixture is actually executed in plugin/repository-hdfs as a
dependency. The fixture is not needed and actually causes a failure
because we have two copies now and both use the same ports.
Replaces the vagrant based kerberos fixtures with docker based test fixtures plugin.
The configuration is now entirely static on the docker side and no longer driven by Gradle,
also two different services are being configured since there are two different consumers of the fixture that can run in parallel and require different configurations.
Blob store compression was not enabled for some of the files in
snapshots due to constructor accessing sub-class fields. Fixed to
instead accept compress field as constructor param. Also fixed chunk
size validation to work.
Deprecated repositories.fs.compress setting as well to be able to unify
in a future commit.
This commit changes the `TransportVerifyShardBeforeCloseAction` so that it
always forces the flush of the shard. It seems that #37961 is not sufficient to
ensure that the translog and the Lucene commit share the exact same max
seq no and global checkpoint information in case of one or more noop
operations have been made.
The `BulkWithUpdatesIT.testThatMissingIndexDoesNotAbortFullBulkRequest`
and `FrozenIndexTests.testFreezeEmptyIndexWithTranslogOps` test this trivial
situation and they both fail 1 on 10 executions.
Relates to #33888
The apache commons http client implementations recently released
versions that solve TLS compatibility issues with the new TLS engine
that supports TLSv1.3 with JDK 11. This change updates our code to
use these versions since JDK 11 is a supported JDK and we should
allow the use of TLSv1.3.
* There is no point in hsyncing after every individual write since there is only value in completely written blobs for restores, this is ensures by the `SYNC` flag already and there is no need for separately invoking `hsync` after individual writes
This commit changes the format of the `hits.total` in the search response to be an object with
a `value` and a `relation`. The `value` indicates the number of hits that match the query and the
`relation` indicates whether the number is accurate (in which case the relation is equals to `eq`)
or a lower bound of the total (in which case it is equals to `gte`).
This change also adds a parameter called `rest_total_hits_as_int` that can be used in the
search APIs to opt out from this change (retrieve the total hits as a number in the rest response).
Note that currently all search responses are accurate (`track_total_hits: true`) or they don't contain
`hits.total` (`track_total_hits: true`). We'll add a way to get a lower bound of the total hits in a
follow up (to allow numbers to be passed to `track_total_hits`).
Relates #33028
Closes#35435
- make it easier to add additional testing tasks with the proper configuration and add some where they were missing.
- mute or fix failing tests
- add a check as part of testing conventions to find classes not included in any testing task.
The contains syntax was added in #30874 but the skips were not properly
put in place.
The java runner has the feature so the tests will run as part of the
build, but language clients will be able to support it at their own
pace.
The new implementation is functional equivalent with the old, ant based one.
It parses task standard error to get the missing classes and violations in the same way.
I considered re-using ForbiddenApisCliTask but Gradle makes it hard to build inheritance with tasks that have task actions , since the order of the task actions can't be controlled.
This inheritance isn't dully desired either as the third party audit task is much more opinionated and we don't want to expose some of the configuration.
We could probably extract a common base class without any task actions, but probably more trouble than it's worth.
Closes#31715
This removes custom Response classes that extend `AcknowledgedResponse` and do nothing, these classes are not needed and we can directly use the non-abstract super-class instead.
While this appears to be a large PR, no code has actually changed, only class names have been changed and entire classes removed.
Hadoop's security model uses the OS level authentication modules to collect
information about the current user. In JDK 11, the UnixLoginModule makes
use of a new permission to determine if the executing code is allowed to load
the libraries required to pull the user information from the OS. This PR adds
that permission and re-enables the tests that were previously failing when
testing against JDK 11.
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes most of the calls not in X-Pack to their new versions.
* Upgrade bouncycastle
Required to fix
`bcprov-jdk15on-1.55.jar; invalid manifest format `
on jdk 11
* Downgrade bouncycastle to avoid invalid manifest
* Add checksum for new jars
* Update tika permissions for jdk 11
* Mute test failing on jdk 11
* Add JDK11 to CI
* Thread#stop(Throwable) was removed
http://mail.openjdk.java.net/pipermail/core-libs-dev/2018-June/053536.html
* Disable failing tests #31456
* Temprorarily disable doc tests
To see if there are other failures on JDK11
* Only blacklist specific doc tests
* Disable only failing tests in ingest attachment plugin
* Mute failing HDFS tests #31498
* Mute failing lang-painless tests #31500
* Fix backwards compatability builds
Fix JAVA version to 10 for ES 6.3
* Add 6.x to bwx -> java10
* Prefix out and err from buildBwcVersion for readability
```
> Task :distribution:bwc:next-bugfix-snapshot:buildBwcVersion
[bwc] :buildSrc:compileJava
[bwc] WARNING: An illegal reflective access operation has occurred
[bwc] WARNING: Illegal reflective access by org.codehaus.groovy.reflection.CachedClass (file:/home/alpar/.gradle/wrapper/dists/gradle-4.5-all/cg9lyzfg3iwv6fa00os9gcgj4/gradle-4.5/lib/groovy-all-2.4.12.jar) to method java.lang.Object.finalize()
[bwc] WARNING: Please consider reporting this to the maintainers of org.codehaus.groovy.reflection.CachedClass
[bwc] WARNING: Use --illegal-access=warn to enable warnings of further illegal reflective access operations
[bwc] WARNING: All illegal access operations will be denied in a future release
[bwc] :buildSrc:compileGroovy
[bwc] :buildSrc:writeVersionProperties
[bwc] :buildSrc:processResources
[bwc] :buildSrc:classes
[bwc] :buildSrc:jar
```
* Also set RUNTIME_JAVA_HOME for bwcBuild
So that we can make sure it's not too new for the build to understand.
* Align bouncycastle dependency
* fix painles array tets
closes#31500
* Update jar checksums
* Keep 8/10 runtime/compile untill consensus builds on 11
* Only skip failing tests if running on Java 11
* Failures are dependent of compile java version not runtime
* Condition doc test exceptions on compiler java version as well
* Disable hdfs tests based on runtime java
* Set runtime java to minimum supported for bwc
* PR review
* Add comment with ticket for forbidden apis
Armin Braun
Rory Hunter
Mark Vieira
Alpar Torok
Tanguy Leroux
Jason Tedor
Yogesh Gaikwad
Henning Andersen
Jay Modi
Jim Ferenczi
Gordon Brown
Pratik Sanglikar
Benjamin Trent
Lee Hinman
James Baiera
Nik Everett
Vladimir Dolzhenko