This switches a few tests for field mappers from `ESSingleNodeTestCase`
to `ESTestCase` because, in general, we prefer to avoid
`ESSingleNodeTestCase` when we can because it is slow and "big". "Big"
here means that it pulls in an entire node, making it difficult to
reason about what you are testing.
We have to set the recovery setting to `0` if we don't want throttling
from recoveries. Otherwise the randomized value used for this setting in
tests can lead to throttling unexpectedly.
Closes#61311
With #60683 we stopped forcing aggregating all docs using a single
Aggregator which made some of our accuracy assumptions about the stats
aggregator incorrect. This adds a test that does the forcing and asserts
the old accuracy and adds a test without the forcing with much looser
accuracy guarantees.
Closes#61132
The FieldNamesFieldMapper field has different behaviour for indexes created in
clusters earlier than v6.1, and the code to deal with this was still using the vestigial
FieldType field of FieldMapper in its indexing path. This meant that documents
added after an upgrade were not correctly indexing their field names field. This
commit corrects the parseCreateField method to use the default field type.
Fixes#61305
Today a common reason for a `ShardLockObtainFailedException` is when a
shard is removed from a node and then assigned straight back to it again
before the node has had a chance to shut the previous shard instance
down. For instance, this can happen if a node briefly leaves the cluster
holding a primary with no in-sync replicas.
The message in this case is typically as follows:
obtaining shard lock timed out after 5000ms, previous lock details: [shard creation] trying to lock for [shard creation]
This is pretty hard to interpret, and doesn't raise the important
question: "why didn't the shard shut down sooner?"
With this change we reword the message a bit, report the age of the
shard lock, and adjust the details to report that the lock is held by a
closing shard:
obtaining shard lock for [starting shard] timed out after [5000ms], lock already held for [closing shard] with age [12345ms]
Relates #38807
We have seen a situation where the total search operations are higher
than expected. Unfortunately, we did not have enough info to figure it
out. This commit adds the failures to the error to provide more context
and adjusts the log level in case of failure to debug.
We only work with heap byte buffers at this point and those we can and do unwrap the
`byte[]` ourselves and use `BytesArray` instead of a needless level of indirection via `ByteBuffer`.
There is a corner case here in which during partial snapshot the index is
deleted right between starting the snapshot in the CS and the data node getting to work
on it, causing the data node the fail that shard snapshot and making the snapshot `PARTIAL`.
Closes#61208
Adds a method to make a random date `DateFormatter` pattern. We expect
this'll be useful for runtime fields to compate their formatting with
the standard date field.
Currently we occasionally can get ArithmeticException from parsing bad input
values on 'date' fields that are passed on even if 'ignore_malformed' is set.
This change adds this exception to the ones we already catch for malformed
values.
Closes#52634
Today we allocate a new `byte[]` for each document written to the
cluster state. Some of these documents may be quite large. We need a
buffer that's at least as large as the largest document, but there's no
need to use a fresh buffer for each document.
With this commit we re-use the same `byte[]` much more, only allocating
it afresh if we need a larger one, and using the buffer needed for one
round of persistence as a hint for the size needed for the next one.
The 7.x branch preserves the legacy discovery mechanism from 6.x purely
for running internal cluster tests; this mechanism is otherwise
completely untested and unsupported. However it is still technically
possible to use it outside of the test suite if you dig through the
source code to work out what settings need to be set. With this change
we make it impossible to use this mechanism in production.
Closes#61177
The ReloadSecureSettingsIT makes requests to the reload settings apis.
In 7.x, the client used from the integ test infrastructure may be a
transport client. In that case, the expected exception type, and causes
the test to fail (though it will hang indefinitely due to not counting
down the latch, see
https://github.com/elastic/elasticsearch/pull/60800). This commit adds
unwrapping of the remote exception to get the underlying expected
exception.
closes#51546
Use transport blocking to make relocation take forever instead of relying on the relocation to take long enough to clash with the snapshot.
Closes#61069
It is disastrous if we commit an incremental cluster state update
without having written the full state first. We assert that this doesn't
happen, but it is hard to fully test the myriad ways that things might
fail in a messy production environment. Given the disastrous
consequences it is worth erring on the side of caution in this area.
This commit fails invalid writes even if assertions are disabled.
This commit adds the `data_hot`, `data_warm`, `data_cold`, and `data_frozen` node roles to the
x-pack plugin. These roles are intended to be the base for the formalization of data tiers in
Elasticsearch.
These roles all act as data nodes (meaning shards can be allocated to them). Nodes with the existing
`data` role acts as though they have all of the roles configured (it is a hot, warm, cold, and
frozen node).
This also includes a custom `AllocationDecider` that allows the user to configure the following
settings on a cluster level:
- `cluster.routing.allocation.require._tier`
- `cluster.routing.allocation.include._tier`
- `cluster.routing.allocation.exclude._tier`
And in index settings:
- `index.routing.allocation.require._tier`
- `index.routing.allocation.include._tier`
- `index.routing.allocation.exclude._tier`
Relates to #60848
Converting AllFieldMapper to parametrized form ended up not being run through BWC
testing, resulting in an incorrect implementation being committed. This commit fixes
the serialization, and adds unit tests as well as unmuting the BWC test that uncovered
the bug.
Fixes#60986
Elasticsearch currently blocks writes by default when a master is unavailable. The cluster.no_master_block setting allows
a user to change this behavior to also block reads when a master is unavailable. This PR introduces a way to now also still
allow writes when a master is offline. Writes will continue to work as long as routing table changes are not needed (as
those require the master for consistency), or if dynamic mapping updates are not required (as again, these require the
master for consistency).
Eventually we should switch the default of cluster.no_master_block to this new mode.
Today a snapshot repository verification ensures that all master-eligible and data nodes have write access to the
snapshot repository (and can see each other's data) since taking a snapshot requires data nodes and the currently
elected master to write to the repository. However, a dedicated voting-only master-eligible node is not a data node and
will never be the elected master so we should not require it to have write access to the repository.
Closes#59649
Repositories can't be unregistered when they are actively being used for snapshots or restores. Wildcard repository
deletes could silently bypass the "repo in use" checks however, which is now fixed.
This makes KeywordFieldMapper extend ParametrizedFieldMapper, with explicitly
defined parameters.
In addition, we add a new option to Parameter, restrictedStringParam, which
accepts a restricted set of string options.
The Query string parser was not delegating the construction of wildcard/regex queries to the underlying field type.
The wildcard field has special data structures and queries that operate on them so cannot rely on the basic regex/wildcard queries that were being used for other fields.
Closes#60957
Use thread-local buffers and deflater and inflater instances to speed up
compressing and decompressing from in-memory bytes.
Not manually invoking `end()` on these should be safe since their off-heap memory
will eventually be reclaimed by the finalizer thread which should not be an issue for thread-locals
that are not instantiated at a high frequency.
This significantly reduces the amount of byte copying and object creation relative to the previous approach
which had to create a fresh temporary buffer (that was then resized multiple times during operations), copied
bytes out of that buffer to a freshly allocated `byte[]`, used 4k stream buffers needlessly when working with
bytes that are already in arrays (`writeTo` handles efficient writing to the compression logic now) etc.
Relates #57284 which should be helped by this change to some degree.
Also, I expect this change to speed up mapping/template updates a little as those make heavy use of these
code paths.
This commit introduces a new thread pool, `system_read`, which is
intended for use by system indices for all read operations (get and
search). The `system_read` pool is a fixed thread pool with a maximum
number of threads equal to lesser of half of the available processors
or 5. Given the combination of both get and read operations in this
thread pool, the queue size has been set to 2000. The motivation for
this change is to allow system read operations to be serviced in spite
of the number of user searches.
In order to avoid a significant performance hit due to pattern matching
on all search requests, a new metadata flag is added to mark indices
as system or non-system. Previously created system indices will have
flag added to their metadata upon upgrade to a version with this
capability.
Additionally, this change also introduces a new class, `SystemIndices`,
which encapsulates logic around system indices. Currently, the class
provides a method to check if an index is a system index and a method
to find a matching index descriptor given the name of an index.
Relates #50251
Relates #37867
Backport of #57936
We accept _source values with multiple levels of arrays, such as
`"field": [[[1, 2]]]`. This PR ensures that field retrieval can handle nested
arrays by unwrapping the arrays before parsing the values.
Same as https://github.com/elastic/elasticsearch/pull/43288 for GCS.
We don't need to do the bucket exists check before using the repo, that just needlessly
increases the necessary permissions for using the GCS repository.
Because the 'fields' option loads from _source (which is a stored field), it is
not possible to retrieve 'fields' when stored_fields are disabled.
This also fixes#60912, where setting stored_fields: _none_ prevented the
_ignored fields from being loaded and caused a parsing exception.
This moves the `distance_feature` query building out of
`DistanceFeatureQueryBuilder` and into subclasses of `MappedFieldType`.
Without this we don't have a chance of supporting this for runtime
fields. In general I'm not sad to see the `instanceof`s go.
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
This way is faster, saving about 8% on the microbenchmark that rounds to
the nearest month. That is in the hot path for `date_histogram` which is
a very popular aggregation so it seems worth it to at least try and
speed it up a little.
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
This commit removes the ability to test the top level result of an aggregator
before it runs the final reduce. All aggregator tests that use AggregatorTestCase#search
are rewritten with AggregatorTestCase#searchAndReduce in order to ensure that we test
the final output (the one sent to the end user) rather than an intermediary result
that could be different.
This change also removes spurious commits triggered on top of a random index writer.
These commits slow down the tests and are redundant with the commits that the
random index writer performs.
There is no point in timing out a join attempt any more once a cluster
is entirely in 7.x. Timing out and retrying with the same master is
pointless, and an in-flight join attempt to one master no longer blocks
attempts to join other masters. This commit deprecates this unnecessary
setting and removes its effect from the joining process.
Relates #60873 which removes this setting in master.
This commit makes IpFieldMapper extend ParametrizedFieldMapper. It also
updates the IpFieldMapper docs to add the ignore_malformed parameter,
which was not previously documented.
Sometimes this test would refresh the disk stats so quickly that it hit
the refresh rate limiter even though it was almost completely disabled.
This commit allows the rate limiter to be completely disabled.
Closes#60587
Several /proc files are expected to contain a single line. We assert on
this in tests, but the contents of the file are lost and the assertion
therefore lacks important information to debug why the file appeared to
have multiple lines. This commit dumps the contents of the file on
assertion failure.
relates #59284
The ReloadSecureSettingsIT uses latches to ensure coordination across
requests to the underlying in memory cluster. However, in the case of an
expected failure, if the assertion fails, the latch will never be
counted down, and will cause the test to hang indefinitely. This commit
ensures the latch is always counted down with a try/finally.
relates #51546
Collapse search queries that sort by a field can throw
an ArrayStoreException due to a bug in the [sort optimization](https://github.com/elastic/elasticsearch/pull/51852)
introduced in 7.7.0. Search collapsing were not supposed to
be eligible for this sort optimization so this change explicitly
filters them from this new feature.
Currently the transport replication action does not propagate the force
execution parameter when acquiring the indexing permit. The logic to
acquire the index permit supports force execution, so this parameter
should be propagate. Fixes#60359.
This pull request adds recovery state tracking for Searchable Snapshots.
In order to track recoveries for searchable snapshot backed indices, this pull
request adds a new type of RecoveryState.
This newRecoveryState instance is able to deal with the
small differences that arise during Searchable snapshots recoveries.
Those differences can be summarized as follows:
- The Directory implementation that's provided by SearchableSnapshots mark the
snapshot files as reused during recovery. In order to keep track of the
recovery process as the cache is pre-warmed, those files shouldn't be marked
as reused.
- Once the shard is created, the cache starts its pre-warming phase, meaning that
we should keep track of those downloads during that process and tie the recovery
to this pre-warming phase. The shard is considered recovered once this pre-warming
phase has finished.
Backport of #60505
This commit uses the new location for the reindex java-api documentation.
Temporary files have been left behind to pacify the docs build.
related #60339
* Stop redundantly creating a `0` length `ByteArray` that is never used
* Add efficient way to get a minimal size copy of the bytes in a `BytesStreamOutput`
* Avoid multiple redundant `byte[]` copies in search cache key creation
Implements license degradation behavior for searchable snapshots. Snapshot-backed shards are failed when the license becomes invalid, and shards won't be reallocated. After valid license is put in place again, shards are allocated again.
Currently, validation of mappers (checking that cross-references are correct, limits on
field name lengths and object depths, multiple definitions, etc) is performed by the
MapperService. This means that any mapper-specific validation, for example that done
on the CompletionFieldMapper, needs to be called specifically from core server code,
and so we can't add validation to mappers that live in plugins.
This commit reworks the validation framework so that mapper-specific validation is
done on the Mapper itself. Mapper gets a new `validate(MappingLookup)`
method (already present on `MetadataFieldMapper` and now pulled up to the parent
interface), which is called from a new `DocumentMapper.validate()` method. All
the validation code currently living on `MapperService` moves either to individual
mapper implementations (FieldAliasMapper, CompletionFieldMapper) or into
`MappingLookup`, an altered `DocumentFieldMappers` which now knows about
object fields and can check for duplicate definitions, or into DocumentMapper
which handles soft limit checks.
In the metadata persistence logic we failed to override the bulk write
method on the FilterOutputStream resulting in all the writes to it
running byte-by-byte in a loop adding a large number of bounds checks
needlessly.
Small oversight in #56078 that only showed up during backporting where a stream copy was turned from a non-closing to a closing one. Enhanced part of a test in this PR to make it show up in master also even though we practically never use this method with stream targets that actually close.
We have various ways of copying between two streams and handling thread-local
buffers throughout the codebase. This commit unifies a number of them and
removes buffer allocations in many spots.
Previously if an inner_hits block required _ source, we would reload and parse
the root document's source for every hit. This PR adds a shared SourceLookup to
the inner hits context that allows inner hits to reuse parsed source if it's
already available. This matches our approach for sharing the root document ID.
Relates to #32818.
This PR simplifies the hierarchy for ordinals field data classes:
* Remove `AbstractIndexFieldData`, since only `AbstractIndexOrdinalsFieldData`
inherits directly from it.
* Make `SortedSetOrdinalsIndexFieldData` extend
`AbstractIndexOrdinalsFieldData`. This lets us remove some redundant code.
Allows nanosecond resolution in search_after (#60328)
This fixes `search_after` to properly parse string formatted dates that
have nanosecond resolution.
Closes#52424
Today when a node fails to properly deserialize a transport message with
a parent task we log the following relatively uninformative message:
java.lang.IllegalStateException: Message not fully read (response) for requestId [9999], handler [org.elasticsearch.transport.TransportService$ContextRestoreResponseHandler/org.elasticsearch.transport.TransportService$ContextRestoreResponseHandler/org.elasticsearch.transport.TransportService$6@abcdefgh], error [false]; resetting
In particular, the wrapping of the listener in the `TransportService`
obscures all clues as to the source of the problem, e.g. the action name
or the identity of the underlying listener. This commit exposes the
inner listener to the logs.
Also if the listener is wrapped with `ContextPreservingActionListener`
then its identity is similarly hidden. This commit also exposes the
wrapped listener in this case.
Relates #38939
Same as #59905 but for shard level metadata. Since we wnat to retain
the ability to do safe+atomic writes for non-uuid shard generations
this PR has to create two separate write paths for both kinds of
shard generations.
Writing the `index.latest` blob is unnecessary unless the contents of the repository
are to be used as a URL-repository. Also, in some edge cases, the fact that `index.latest` is the only
blob in the repository that regularly gets overwritten was causing compatibility issues with
some backing blobstores (Azure no-overwrite policy, Hitachy S3 equivalent).
=> this commit changes behavior to make snapshots not fail if writing `index.latest` fails
and adds a setting to disable writing `index.latest`.
For consistency reasons (and reducing the overload of IllegalArgumentException)
this changes the exception thrown when trying to create a data stream
that already exists.
(cherry picked from commit ac2184c4614bba0f3ee377da49aea0daed98bab4)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
This change ensures that we call the listener for partial merge failure **before**
calling the completion listener in order to avoid race condition in tests.
Closes#60446
- Replace immediate task creations by using task avoidance api
- One step closer to #56610
- Still many tasks are created during configuration phase. Tackled in separate steps
The `SourceLookup` class provides access to the _source for a particular
document, specified through `SourceLookup#setSegmentAndDocument`. Previously
the search context contained a single `SourceLookup` that was shared between
different fetch subphases. It was hard to reason about its state: is
`SourceLookup` set to the expected document? Is the _source already loaded and
available?
Instead of using a global source lookup, the fetch hit context now provides
access to a lookup that is set to load from the hit document.
This refactor closes#31000, since the same `SourceLookup` is no longer shared
between the 'fetch _source phase' and script execution.
The oversize algorithm was allocating more pages than necessary to accommodate `minTargetSize`.
An example would be that a 16k page size and 15k `minTargetSize` would result in a new size of 32k (2 pages).
The difference between the minimum number of necessary pages and the estimated size then keeps growing as sizes increase.
I don't think there is much value in preemptively allocating pages by over-sizing aggressively since the behavior of
the system is quite different from that of a single array where over-sizing avoids copying
once the minimum target size is more than a single page.
Relates #60173 which lead me to this when `BytesStreamOutput` would allocate a large number of never used
pages during serialization of repository metadata.
Instances of `BlobStoreIndexShardSnapshots` can be of non-trivial size. In case of snapshotting a larger
number of shards the previous execution order would lead to memory use proportional to the number of shards
for these objects. With this change, the number of these objects on heap is bounded by the size of the snapshot
pool (except for in the BwC format path).
This PR makes it so that they are written to the repository at the earliest possible point in time
so that they can be garbage collected.
If shard generations are used, we can safely write these right at the beginning of the shard snapshot.
If shard generations are not used we can only write them at the end of the shard snapshot after all
other blobs have been written.
Closes#60173
CCR will stop functioning if the master node is on 7.8, but data nodes
are before that version because the master node considers that all data
nodes do not have the remote cluster client role. This commit allows CCR
work on data nodes with legacy roles only.
Relates #54146
Relates #59375
This fixes the behavior of the snapshot state machine in the following edge case:
1. Snapshot is running
2. Delete/abort for the snapshot is started
3. Snapshot fails to finalize
We were not removing the failed snapshot id from the list of snapshots to delete in the delete.
This lead to an error in the repository, which throws if we try to delete a non-existing snapshot.
This commmit updates the deletions in progress by removing the failed snapshot id.
The fact that this could lead to snapshot delete entries without any snapshot ids is not optimized
on purpose because it allows for another attempt at writing clean `RepositoryData` and will run basic
cleanup on the repository (root level blobs and stale indices) and thus bring the repository back into
a clean state after a failed finalization.
Closes#60274
The test assumed that the master fail-over would always work out as a single step.
This is not guaranteed however and we can randomly see master failing over twice,
in which case the transport listener will be failed on the node that stops being
leader and we have to catch an exception for the deletes as well just like we do
for the snapshot.
Closes#60262
Adds a full list of supported aggregations to the node info API. This list
will be used in transform tests and telemetry mapping tests that will be added
as follow-up PRs.
Fixes#59774
This feature adds a new `fields` parameter to the search request, which
consults both the document `_source` and the mappings to fetch fields in a
consistent way. The PR merges the `field-retrieval` feature branch.
Addresses #49028 and #55363.
Transport connections between nodes remain in place until one or other
node shuts down or the connection is disrupted by a flaky network.
Today it is very difficult to demonstrate that transient failures and
cluster instability are caused by the network even though this is often
the case. In particular, transport connections open and close without
logging anything, even at `DEBUG` level, making it very hard to quantify
the scale of the problem or to correlate the networking problems with
external events.
This commit adds the missing `DEBUG`-level logging when transport
connections open and close, and also tracks the total number of
transport connections a node has opened as a measure of the stability of
the underlying network.
* Fix Test Failure in testCorrectCountsForDoneShards
Fixing the freak edge case where the node shard status request returns before
the node was able to send the state update request to master and update the cluster state.
Without this change, the snapshot shard status would report as `DONE` once the data node
has finished updating the shard in the cluster state.
If the data node then drops out of the cluster before the state has been updated, then
the status will jump to "FAILURE" because the master updates the state once the data node
leaves the cluster.
Closes#60247
Today if a cluster state observer's listener takes a long time to
process a notification then we log the following rather useless warning
message:
[notifying listener [org.elasticsearch.cluster.ClusterStateObserver$ObserverClusterStateListener@12345678]] took [34567ms]
This commit adds a handful of simple `toString()` implementations in
order to identify the owner of the listener in question.
This change forks the execution of partial
reduces in the coordinating node to the search thread pool.
It also ensures that partial reduces are executed sequentially
and asynchronously in order to limit the memory and cpu that a
single search request can use but also to avoid blocking a
network thread.
If a partial reduce fails with an exception, the search
request is cancelled and the reporting of the error is
delayed to the start of the fetch phase (when the final
reduce is performed). This ensures that we cleanup the
in-flight search requests before returning an error to
the user.
Closes#53411
Relates #51857
We can save one round of serializing `RepositoryData` on the write path.
This also leads to somewhat better compression because we compress larger chunks
in one go potentially when compared to serializing and compressing in one go.
Also, fixed the double wrapping of collections when copying the repository
data instance via the `withGenId`.
Keepalive options are not well-documented (only in transport section, although also available at http and network level).
Co-authored-by: David Turner <david.turner@elastic.co>
Co-authored-by: James Rodewig <40268737+jrodewig@users.noreply.github.com>
keepalives tell any intermediate devices that the connection remains alive, which helps with overzealous firewalls that are
killing idle connections. keepalives are enabled by default in Elasticsearch, but use system defaults for their
configuration, which often times do not have reasonable defaults (e.g. 7200s for TCP_KEEP_IDLE) in the context of
distributed systems such as Elasticsearch.
This PR sets the socket-level keep_alive options for network.tcp.{keep_idle,keep_interval} to 5 minutes on configurations
that support it (>= Java 11 & (MacOS || Linux)) and where the system defaults are set to something higher than 5
minutes. This helps keep the connections alive while not interfering with system defaults or user-specified settings
unless they are deemed to be set too high by providing better out-of-the-box defaults.
Currently, we do not categorize the operation type in the rejection
exception messsage when we reject an indexing operation for indexing
memory limits. This commit fixes this to ensure that it is identified as
coordinating, primary, or replica.
Currently the logic to rejection replica rejections is evaluate before
adding the additional bytes of the current operation. This means that
the first replica operation which should be rejected will be allowed to
proceed. This commit fixes this logic and adds unit level test to ensure
indexing pressure behavior is correct.
When a document which is distant from existing buckets gets collected, the
`variable_width_histogram` will create a new bucket and then insert it
into the ordered list of buckets.
Currently, a new merge map array is created to move this bucket. This is
very expensive as there might be thousands of buckets.
This PR creates `mergeBuckets(UnaryOperator<Long> mergeMap)` methods in
`BucketsAggregator` and `MergingBucketsDefferingCollector`, and updates
the `variable_width_histogram` to use them. This eliminates the need to
create an entire merge map array for each new bucket and reduces the
memory overhead of the algorithm.
Co-authored-by: James Dorfman <jamesdorfman@users.noreply.github.com>
In almost all cases we write uuid named files via this method.
Preemptively deleting just wastes IO ops, we can delete after a write failed
and retry the write to cover the few cases where we actually do an overwrite.
Putting an ingest pipeline used to require that the user calling
it had permission to get nodes info as well as permission to
manage ingest. This was due to an internal implementaton detail
that was not visible to the end user.
This change alters the behaviour so that a user with the
manage_pipeline cluster privilege can put an ingest pipeline
regardless of whether they have the separate privilege to get
nodes info. The internal implementation detail now runs as
the internal _xpack user when security is enabled.
Backport of #60106
There is a very unlikely but possible test failure in this test.
The `SnapshotsService` continues iterating over queued operations after
resolving the transport listener. This can lead to a situation where the moved
repository data is not picked up when running the delete (even though we
have the concurrent modifications BwC mode activated) concurrently.
I fixed this in the test so that the test still verifies that this setting works.
Technically speaking, one could add logic to the way we queue and execute repo operations
to address this special case. Since this case only comes about with the concurrent modifications
setting enabled (and the setting is gone in master already) I don't really see a reason to improve
the logic here since we should always fail queued up repo operations on concurrent modification for
safety reasons.
Today there is a node-level `canAllocate` override which the balancer
uses to ignore certain nodes to which it is certain no more shards can
be allocated. In fact this override only ignores nodes which have hit
the rarely-used `cluster.routing.allocation.total_shards_per_node`
limit, so this optimization doesn't have a meaningful impact on real
clusters.
This commit removes this unnecessary fast path from the balancer, and
also removes all the machinery needed to support it.
The single element `close` calls go through a very inefficient path that includes creating
a one element list.
`releaseOnce` is only with a single non-null input in production in two spots so no need for
varargs and any complexity here.
`ReleasableBytesStreamOutput` does not require any `releaseOnce` wrapping because we already have
that kind of logic implemented in `org.elasticsearch.common.util.AbstractArray` (which we were
wrapping here) already.
This improves modularity and also fixes some issues when `docvalues_fields` is
used within `inner_hits` or the `top_hits` agg:
* We previously didn't resolve wildcards in field names.
* We also forgot to enforce the limit `index.max_docvalue_fields_search`.
Due to complicated access checks (reads and writes execute in their own access context) on some repositories (GCS, Azure, HDFS), using a hard coded buffer size of 4k for restores was needlessly inefficient.
By the same token, the use of stream copying with the default 8k buffer size for blob writes was inefficient as well.
We also had dedicated, undocumented buffer size settings for HDFS and FS repositories. For these two we would use a 100k buffer by default. We did not have such a setting for e.g. GCS though, which would only use an 8k read buffer which is needlessly small for reading from a raw `URLConnection`.
This commit adds an undocumented setting that sets the default buffer size to `128k` for all repositories. It removes wasteful allocation of such a large buffer for small writes and reads in case of HDFS and FS repositories (i.e. still using the smaller buffer to write metadata) but uses a large buffer for doing restores and uploading segment blobs.
This should speed up Azure and GCS restores and snapshots in a non-trivial way as well as save some memory when reading small blobs on FS and HFDS repositories.
This commit continues on the work in #59801 and makes other
implementors of the LocalNodeMasterListener interface thread safe in
that they will no longer allow the callbacks to run on different
threads and possibly race each other. This also helps address other
issues where these events could be queued to wait for execution while
the service keeps moving forward thinking it is the master even when
that is not the case.
In order to accomplish this, the LocalNodeMasterListener no longer has
the executorName() method to prevent future uses that could encounter
this surprising behavior.
Each use was inspected and if the class was also a
ClusterStateListener, the implementation of LocalNodeMasterListener
was removed in favor of a single listener that combined the logic. A
single listener is used and there is currently no guarantee on execution
order between ClusterStateListeners and LocalNodeMasterListeners,
so a future change there could cause undesired consequences. For other
classes, the implementations of the callbacks were inspected and if the
operations were lightweight, the overriden executorName method was
removed to use the default, which runs on the same thread.
Backport of #59932
Sometimes there is the need to make a field required in the mappings, and validate that a value has been provided for it. This can be done through a validator when using ParametrizedFieldMapper, but validators need to run also when a value for a field has not been specified.
Relates to #59332
There were two subtle bugs here from backporting #56911 to 7.x.
1. We passed `null` for the `shards` map which isn't nullable any longer
when creating `SnapshotsInProgress.Entry`, fixed by just passing an empty map
like the `null` handling did in the past.
2. The removal of a failed `INIT` state snapshot from the cluster state tried
removing it from the finalization loop (the set of repository names that are
currently finalizing). This will trip an assertion since the snapshot failed
before its repository was put into the set. I made the logic ignore the set
in case we remove a failed `INIT` state snapshot to restore the old logic to
exactly as it was before the concurrent snapshots backport to be on the safe
side here.
Also, added tests that explicitly call the old code paths because as can be seen
from initially missing this, the BwC tests will only run in the configuration new
version master, old version nodes ever so often and having a deterministic test
for the old state machine seems the safest bet here.
Closes#59986
For ingest node processors a per processor description
was recently added. This commit displays that description
in the verbose output of the pipeline simulation.
related #57906
In #54716 I removed pipeline aggregators from the aggregation result
tree and caused us to read them from the request. This saves a bunch of
round trip bytes, which is neat. But there was a bug in the backwards
compatibility logic. You see, we still have to give the pipeline
aggregations to nodes older than 7.8 over the wire because that is how
they know what pipelines to run. They have the pipelines in the request
but they don't read them. They use the ones in the response tree.
Anyway, we had a bug where we were never sending pipelines defined two
levels down. So while you are upgrading the pipeline wouldn't run.
Sometimes. If the data node of the "first" result was post-7.8 and the
coordinating node was pre-7.8.
This fixes the bug.
Today the `InternalClusterInfoService` uses the
`LocalNodeMasterListener` interface to start/stop its operations. Since
the `onMaster` and `offMaster` methods are called on the `MANAGEMENT`
threadpool, there's no guarantee that they run in the correct sequence,
which could result in an elected master failing to regularly update the
cluster info.
Since this service is also a `ClusterStateListener` we may as well drop
the usage of the `LocalNodeMasterListener` interface and simply update
the status of the local node on the applier thread in `clusterChanged`
to ensure consistency.
Additionally, today the `InternalClusterInfoService` uses a simple flag
to track whether the local node is the elected master or not. If the
node stops being the master and then starts again within a few seconds
then the scheduled updates from the old mastership might carry on
running in addition to the ones for the new mastership.
This commit addresses that by tracking the identity of the scheduled
update job and creating a new job for each mastership.
The TypeParser implementations of all ParametrizedFieldMapper descendant classes are
essentially the same - stateless, requiring the construction of a Builder object, and calling
parse on it before returning it. We can make this easier (and less error-prone) to
implement by wrapping the logic up into a final class, which takes a function to produce
the Builder from a name and parser context.
We never used the `IndexSettings` parameter and we only used the
`MappedFieldType` parameter to get the name of the field which we
already know everywhere where we build the `IFD.Builder`. This allows us
to drop a fair bit of ceremony from a couple of tests.
ParametrizedFieldMapper overrides `toXContent` from `FieldMapper`, yet it could override `doXContentBody` and rely on the `toXContent` from the base class. Additionally, this allows to make `doXContentBody` final. Also, toXContent is still overridden only to make it final.
With uuid named segment data blobs there is no reason to ensure no overwrites are happening
for these blobs when writing. On the contrary, at least on Azure this check can conflict with
the SDK's retrying and cause upload failures randomly.
Refactored `CheckSumBlobStoreFormat` so it can more easily be reused in
other functionality (i.e. upcoming repair logic).
Simplified away constant `failIfAlreadyExists` parameter and removed the atomic
write method and its tests.
The atomic write method was only used in a single spot and that spot has now been adjusted to
work the same way writing root level metadata works.
Follow up to #59606 using some of the new infrastructure and making similar cleanups (and due to at times better handling of size hints and empty collections also optimizations in the stream utility methods this also means speedups) in various spots in the core codebase.
Previously we constructed a GeometryFormat object and delegated point parsing to
it. This wasn't a good fit conceptually because each GeometryFormat instance
didn't represent a distinct point format.
This replaces that data structure that we use to resolve bucket ids in
bucketing aggs that are inside other bucketing aggs. This replaces the
"legoed together" data structure with a purpose built `LongLongHash`
with semantics similar to `LongHash`, except that it has two `long`s
as keys instead of one.
The microbenchmarks show a fairly substantial performance gain on the
hot path, around 30%. Rally's higher level benchmarks show anywhere
from 0 to 7% speed improvements. Not as much as I'd hoped, but nothing
to sneeze at. And, after all, we all allocating slightly less data per
owningBucketOrd, which is always nice.
Today `GET _nodes/stats/fs` includes `{least,most}_usage_estimate`
fields for some nodes. These fields have rather strange semantics. They
are only reported on the elected master and on nodes that have been the
elected master since they were last restarted; when a node stops being
the elected master these stats remain in place but we stop updating them
so they may become arbitrarily stale.
This means that these statistics are pretty meaningless and impossible
to use correctly. Even if they were kept up to date they're never
reported for data-only nodes anyway, despite the fact that data nodes
are the ones where we care most about disk usage. The information needed
to compute the path with the least/most available space is already
provided in the rest the stats output, so we can treat the inclusion of
these stats as a bug and fix it by simply removing them in this commit.
Since these stats were always optional and mostly omitted (for opaque
reasons) this is not considered a breaking change.
This cleans up a few rough edged in the `variable_width_histogram`,
mostly found by @wwang500:
1. Setting its tuning parameters in an unexpected order could cause the
request to fail.
2. We checked that the maximum number of buckets was both less than
50000 and MAX_BUCKETS. This drops the 50000.
3. Fixes a divide by 0 that can occur of the `shard_size` is 1.
4. Fixes a divide by 0 that can occur if the `shard_size * 3` overflows
a signed int.
5. Requires `shard_size * 3 / 4` to be at least `buckets`. If it is less
than `buckets` we will very consistently return fewer buckets than
requested. For the most part we expect folks to leave it at the
default. If they change it, we expect it to be much bigger than
`buckets`.
6. Allocate a smaller `mergeMap` in when initially bucketing requests
that don't use the entire `shard_size * 3 / 4`. Its just a waste.
7. Default `shard_size` to `10 * buckets` rather than `100`. It *looks*
like that was our intention the whole time. And it feels like it'd
keep the algorithm humming along more smoothly.
8. Default the `initial_buffer` to `min(10 * shard_size, 50000)` like
we've documented it rather than `5000`. Like the point above, this
feels like the right thing to do to keep the algorithm happy.
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
There was a bug in the geoshape circuit-breaker check where the
hash values array was being allocated before its new size was
accounted for by the circuit breaker.
Fixes#57847.
* Adding new `require_alias` option to indexing requests (#58917)
This commit adds the `require_alias` flag to requests that create new documents.
This flag, when `true` prevents the request from automatically creating an index. Instead, the destination of the request MUST be an alias.
When the flag is not set, or `false`, the behavior defaults to the `action.auto_create_index` settings.
This is useful when an alias is required instead of a concrete index.
closes https://github.com/elastic/elasticsearch/issues/55267
Currently, when we apply a cluster state change to a shard on a non-master node,
we check to see if the mappings need to be updated by comparing the decompressed
serialized mappings from the update against the serialized version of the shard's
existing mappings. However, we already have a much simpler way of checking this,
by comparing mapping versions on the index metadata of the old and new states.
This commit adds a shortcut to MapperService.updateMappings() that compares
these mapping versions, and ignores the merge if they are equal.
This commit makes DateFieldMapper extend ParametrizedFieldMapper,
declaring its parameters explicitly. As well as changes to DateFieldMapper
itself, there are some changes to dynamic mapping code to ensure that
dynamically detected date formats are passed through to new date mapper
builders.
* Fix handling of final pipelines when destination is changed (#59522)
This change fixes final pipelines if destination index is changed during pipeline run:
-final pipelines can't change destination anymore, exception is thrown if they try to
-if request/default pipeline changes destination final pipeline from old index won't be executed
-if request/default pipeline changes destination and new index has final pipeline it will be executed
-default pipeline from new index won't be executed
Additionally TransportBulkAction.resolvePipelines was moved to IngestService as it's needed for resolving pipelines from new index. Tests were moved accordingly.
Closes#57968
After the work to retry transient replication failures, the local and
global checkpoint test metadata can be incremented on a different thread
than the test thread. This appears to introduce an extremely rare
scenario where this data is not visible for later test assertions. This
commit fixes the issue by using synchronized maps.
Adds a hard_bounds parameter to explicitly limit the buckets that a histogram
can generate. This is especially useful in case of open ended ranges that can
produce a very large number of buckets.
This adds a number of new optional parameters to Parameter, including:
* custom serialization (to handle analyzers)
* deprecated parameter names
* parameter validation
* allowing default values to be based on the values of other parameters
We preserve the previous serialization format of CompletionFieldMapper,
always emitting most fields, in order to meet mapping checks in mixed
version clusters, where the mapper service will check that mappings have
been correctly parsed and updated by checking their serialized outputs.
Eclipse was confused by #59583. It can't see a the public inner
interface within the superclass. This time. Usually that is fine, but
the Eclipse gods don't like this particular code, I guess.
The MappedFieldType#updateMeta method was used for testing equality checks, but we
no longer need these after #59212 , so we can remove this method and make meta final.
Trying to queue up snapshot deletes by blocking the delete of the latest
index-N doesn't work here. The first delete will block on the delete operation
but only do so after having already written the updated repository data.
Since that repository data will contain no snapshots, the subsequent deletes for
`*` will just fall through and complete instead of queue up.
=> Fixed by simply waiting on all files on master so that we block before updating
the repository data and get to test the queueing of equivalent operations
closes#59608
Previously the concrete type parameters for the MappedFieldType didn't always
match those for the FieldMapper. This PR updates the mappers so that the type
parameters always match, which makes the design easier to follow.
A number of obvious possible simplifications that also improve efficiency
in some cases (better empty collection handling and size hint use).
Also, added a shortcut for writing and reading immutable open maps that
can be used to dry up additional spots.
Backport of #58898.
Part of #48366. Now that there is a dedicated API for dangling indices, the auto-import
behaviour can default to off. Also add a note to the breaking changes for 7.9.0.
Today when mounting a searchable snapshot we obtain the snapshot/index
UUIDs and then assume that these are the UUIDs used during the
subsequent restore. If you concurrently delete the snapshot and replace
it with one with the same name then this assumption is violated, with
chaotic consequences.
This commit introduces a check that ensures that the snapshot UUID does
not change during the mount process. If the snapshot remains in place
then the index UUID necessarily does not change either.
Relates #50999
Backport of #59525 to 7.x branch.
* Actions are moved to xpack core.
* Transport and rest actions are moved the data-streams module.
* Removed data streams methods from Client interface.
* Adjusted tests to use client.execute(...) instead of data stream specific methods.
* only attempt to delete all data streams if xpack is installed in rest tests
* Now that ds apis are in xpack and ESIntegTestCase
no longers deletes all ds, do that in the MlNativeIntegTestCase
class for ml tests.
Today `GET _cat/shards` requests the nodes, routing table, and metadata
from the cluster state, but it does not use any information from the
metadata portion of the response. Metadata includes things like mappings
and templates that may be substantial in size.
This commit drops the unnecessary metadata portion of this cluster state
request.
Add a custom factory for recovery state into IndexStorePlugin that
allows different implementors to provide its own RecoveryState
implementation.
Backport of #59038
Enables fully concurrent snapshot operations:
* Snapshot create- and delete operations can be started in any order
* Delete operations wait for snapshot finalization to finish, are batched as much as possible to improve efficiency and once enqueued in the cluster state prevent new snapshots from starting on data nodes until executed
* We could be even more concurrent here in a follow-up by interleaving deletes and snapshots on a per-shard level. I decided not to do this for now since it seemed not worth the added complexity yet. Due to batching+deduplicating of deletes the pain of having a delete stuck behind a long -running snapshot seemed manageable (dropped client connections + resulting retries don't cause issues due to deduplication of delete jobs, batching of deletes allows enqueuing more and more deletes even if a snapshot blocks for a long time that will all be executed in essentially constant time (due to bulk snapshot deletion, deleting multiple snapshots is mostly about as fast as deleting a single one))
* Snapshot creation is completely concurrent across shards, but per shard snapshots are linearized for each repository as are snapshot finalizations
See updated JavaDoc and added test cases for more details and illustration on the functionality.
Some notes:
The queuing of snapshot finalizations and deletes and the related locking/synchronization is a little awkward in this version but can be much simplified with some refactoring. The problem is that snapshot finalizations resolve their listeners on the `SNAPSHOT` pool while deletes resolve the listener on the master update thread. With some refactoring both of these could be moved to the master update thread, effectively removing the need for any synchronization around the `SnapshotService` state. I didn't do this refactoring here because it's a fairly large change and not necessary for the functionality but plan to do so in a follow-up.
This change allows for completely removing any trickery around synchronizing deletes and snapshots from SLM and 100% does away with SLM errors from collisions between deletes and snapshots.
Snapshotting a single index in parallel to a long running full backup will execute without having to wait for the long running backup as required by the ILM/SLM use case of moving indices to "snapshot tier". Finalizations are linearized but ordered according to which snapshot saw all of its shards complete first
There is no point in writing out snapshots that contain no data that can be restored
whatsoever. It may have made sense to do so in the past when there was an `INIT` snapshot
step that wrote data to the repository that would've other become unreferenced, but in the
current day state machine without the `INIT` step there is no point in doing so.
Many of the parameters we pass into this method were only used to
build the `SnapshotInfo` instance to write.
This change simplifies the signature. Also, it seems less error prone to build
`SnapshotInfo` in `SnapshotsService` isntead of relying on the fact that each repository
implementation will build the correct `SnapshotInfo`.
With parallel snapshots incoming (but also in isolation) it makes sense to clean up
`SnapshotsInProgress` construction.
We don't need to pre-compute the waiting shards for every entry. We rarely use this information
(only on routing changes) and in the one spot we did we now simply spent the extra cycles for looping
over all shards instead of just the waiting ones once per routing change tops instead of on every change
to `SnapshotsInProgress` (moreover, we would burn the cycles for looping on all nodes even though only the
current master cares about the information).
In addition to that change I removed some dead code constructors and slighly optimized deserialization.
* Use consistent cluster state instead in state update
* Remove dead loop in tests
* Remove some dead exception ctors
Just three trivial/random things I found.
This API reports on statistics important for data streams, including the number of data
streams, the number of backing indices for those streams, the disk usage for each data
stream, and the maximum timestamp for each data stream
This PR introduces two new fields in to `RepositoryData` (index-N) to track the blob name of `IndexMetaData` blobs and their content via setting generations and uuids. This is used to deduplicate the `IndexMetaData` blobs (`meta-{uuid}.dat` in the indices folders under `/indices` so that new metadata for an index is only written to the repository during a snapshot if that same metadata can't be found in another snapshot.
This saves one write per index in the common case of unchanged metadata thus saving cost and making snapshot finalization drastically faster if many indices are being snapshotted at the same time.
The implementation is mostly analogous to that for shard generations in #46250 and piggy backs on the BwC mechanism introduced in that PR (which means this PR needs adjustments if it doesn't go into `7.6`).
Relates to #45736 as it improves the efficiency of snapshotting unchanged indices
Relates to #49800 as it has the potential of loading the index metadata for multiple snapshots of the same index concurrently much more efficient speeding up future concurrent snapshot delete
Currently we combine coordinating and primary bytes into a single bucket
for indexing pressure stats. This makes sense for rejection logic.
However, for metrics it would be useful to separate them.
This commit increases the default write queue size to 10000. This is to
allow a greater number of pending indexing requests. This work is safe
as we have added additional memory limits. Relates to #59263.
The update by query action parses a script from an object (map or string). We will need to do the same for runtime fields as they are parsed as part of mappings (#59391).
This commit moves the existing parsing of a script from an object from RestUpdateByQueryAction to the Script class. It also adds tests and adjusts some error messages that are incorrect. Also, options were not parsed before and they are now. And unsupported fields trigger now a deprecation warning.
This makes the data_stream timestamp field specification optional when
defining a composable template.
When there isn't one specified it will default to `@timestamp`.
(cherry picked from commit 5609353c5d164e15a636c22019c9c17fa98aac30)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
This adds a low precendece mapping for the `@timestamp` field with
type `date`.
This will aid with the bootstrapping of data streams as a timestamp
mapping can be omitted when nanos precision is not needed.
(cherry picked from commit 4e72f43d62edfe52a934367ce9809b5efbcdb531)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
Relates to #58680. Bugs like that should not only show up in logs
but ideally also get caught in tests. We expect to never see exceptions
in these two spots.
This change removes the redundant submitting of two separate cluster state updates
for the node configuration changes and routing changes that affect snapshots.
Since we submitted the task to deal with node configuration changes every time on master
fail-over we could also move the BwC cleanup loop that removes `INIT` state snapshots as well
as snapshots that have all their shards completed into this cluster state update task.
Aside from improving efficiency overall this change has the fortunate side effect of moving
all snapshot finalization to the CS update thread. This is helpful for concurrent snapshots
since it makes it very natural and straight forward to order snapshot finalizations by exploiting
that they are all initiated on the same thread.
We have recently added internal metrics to monitor the amount of
indexing occurring on a node. These metrics introduce back pressure to
indexing when memory utilization is too high. This commit exposes these
stats through the node stats API.
This commit adds rejections when the indexing memory limits are
exceeded for primary or coordinating operations. The amount of bytes
allow for indexing is controlled by a new setting
`indexing_limits.memory.limit`.
We don't need to switch to the generic or snapshot pool for loading
cached repository data (i.e. most of the time in normal operation).
This makes `executeConsistentStateUpdate` less heavy if it has to retry
and lowers the chance of having to retry in the first place.
Also, this change allowed simplifying a few other spots in the codebase
where we would fork off to another pool just to load repository data.
No need to do any switch to the `SNAPSHOT` pool here, the blob store
repo handles all its writes async on the `SNAPSHOT` pool so we're just
needlessly context-switching to enqueue those tasks there.
Also cleaned up the source only repository (the only override to `finalizeSnapshot`)
to make it clear that no IO is happening there and we don't need to run it on the
`SNAPSHOT` pool either.
Follow up to #56365. Instead of redundantly checking snapshots for completion
over and over, just track the completed snapshots in the CS updates that complete
them instead of looping over the smae snapshot entries over and over.
Also, in the batched snapshot shard status updates, only check for completion
of a snapshot entry if it isn't already finalizing.
Using G1 GC, Elasticsearch can rarely trigger that heap usage goes above
the real memory circuit breaker limit and stays there for an extended
period. This situation will persist until the next young GC. The circuit
breaking itself hinders that from occurring in a timely manner since it
breaks all request before real work is done.
This commit gently nudges G1 to do a young GC and then double checks
that heap usage is still above the real memory circuit breaker limit
before throwing the circuit breaker exception.
Related to #57202
Backport of #59293 to 7.x branch.
* Create new data-stream xpack module.
* Move TimestampFieldMapper to the new module,
this results in storing a composable index template
with data stream definition only to work with default
distribution. This way data streams can only be used
with default distribution, since a data stream can
currently only be created if a matching composable index
template exists with a data stream definition.
* Renamed `_timestamp` meta field mapper
to `_data_stream_timestamp` meta field mapper.
* Add logic to put composable index template api
to fail if `_data_stream_timestamp` meta field mapper
isn't registered. So that a more understandable
error is returned when attempting to store a template
with data stream definition via the oss distribution.
In a follow up the data stream transport and
rest actions can be moved to the xpack data-stream module.
The code path for closed indices is dead code here ever since #39644
because `shards(currentState, indexIds, ...)` does not set
`MISSING` on a closed index's shard that is assigned any longer. Before that change it would always set `MISSING` for a closed index's shard even it was assigned.
=> simplified the code accordingly.
In #52680 we introduced a new health check mechanism. This commit fixes
up some related test failures on Windows caused by erroneously assuming
that all paths begin with `/`.
Closes#59380
With #55773 the snapshot INIT state step has become obsolete. We can set up the snapshot directly in one single step to simplify the state machine.
This is a big help for building concurrent snapshots because it allows us to establish a deterministic order of operations between snapshot create and delete operations since all of their entries now contain a repository generation. With this change simple queuing up of snapshot operations can and will be added in a follow-up.
We have a number of parameters which are universally parsed by almost all
mappers, whether or not they make sense. Migrating the binary and boolean
mappers to the new style of declaring their parameters explicitly has meant
that these universal parameters stopped being accepted, which would break
existing mappings.
This commit adds some extra logic to ParametrizedFieldMapper that checks
for the existence of these universal parameters, and issues a warning on
7x indexes if it finds them. Indexes created in 8.0 and beyond will throw an
error.
Fixes#59359
This refactoring has three motivations:
1. Separate all master node steps during snapshot operations from all data node steps in code.
2. Set up next steps in concurrent repository operations and general improvements by centralizing tracking of each shard's state in the repository in `SnapshotsService` so that operations for each shard can be linearized efficiently (i.e. without having to inspect the full snapshot state for all shards on every cluster state update, allowing us to track more in memory and only fall back to inspecting the full CS on master failover like we do in the snapshot shards service).
* This PR already contains some best effort examples of this, but obviously this could be way improved upon still (just did not want to do it in this PR for complexity reasons)
3. Make the `SnapshotsService` less expensive on the CS thread for large snapshots
With the removal of mapping types and the immutability of FieldTypeLookup in #58162, we no longer
have any cause to compare MappedFieldType instances. This means that we can remove all equals
and hashCode implementations, and in addition we no longer need the clone implementations which
were required for equals/hashcode testing. This greatly simplifies implementing new MappedFieldTypes,
which will be particularly useful for the runtime fields project.
This modifies the `variable_width_histogram`'s distant bucket handling
to:
1. Properly handle integer overflows
2. Recalculate the average distance when new buckets are added on the
ends. This should slow down the rate at which we build extra buckets
as we build more of them.
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
In #52680 we introduced a new health check mechanism. This commit fixes
up some sporadic related test failures, and improves the behaviour of
the `FollowersChecker` slightly in the case that no retries are
configured.
Closes#59252Closes#59172
Today `NodeEnvironment#findAllShardIds` enumerates the index directories
in each data path in order to find one with a specific name. Since we
already know the name of the folder we seek we can construct the path
directly and avoid this directory listing. This commit does that.
The FieldMapper infrastructure currently has a bunch of shared parameters, many of which
are only applicable to a subset of the 41 mapper implementations we ship with. Merging,
parsing and serialization of these parameters are spread around the class hierarchy, with
much repetitive boilerplate code required. It would be much easier to reason about these
things if we could declare the parameter set of each FieldMapper directly in the implementing
class, and share the parsing, merging and serialization logic instead.
This commit is a first effort at introducing a declarative parameter style. It adds a new FieldMapper
subclass, ParametrizedFieldMapper, and refactors two mappers, Boolean and Binary, to use it.
Parameters are declared on Builder classes, with the declaration including the parameter name,
whether or not it is updateable, a default value, how to parse it from mappings, and how to
extract it from another mapper at merge time. Builders have a getParameters method, which
returns a list of the declared parameters; this is then used for parsing, merging and serialization.
Merging is achieved by constructing a new Builder from the existing Mapper, and merging in
values from the merging Mapper; conflicts are all caught at this point, and if none exist then a new,
merged, Mapper can be built from the Builder. This allows all values on the Mapper to be final.
Other mappers can be gradually migrated to this new style, and once they have all been refactored
we can merge ParametrizedFieldMapper and FieldMapper entirely.
We are leaking a FileChannel in #39585 if we release a safe commit with
CancellableThreads. Although it is a bug in Lucene where we do not close
a FileChannel if we failed to create a NIOFSIndexInput, I think it's
safer if we release a safe commit using the generic thread pool instead.
Closes#39585
Relates #45409
Backport of #59076 to 7.x branch.
The commit makes the following changes:
* The timestamp field of a data stream definition in a composable
index template can only be set to '@timestamp'.
* Removed custom data stream timestamp field validation and reuse the validation from `TimestampFieldMapper` and
instead only check that the _timestamp field mapping has been defined on a backing index of a data stream.
* Moved code that injects _timestamp meta field mapping from `MetadataCreateIndexService#applyCreateIndexRequestWithV2Template58956(...)` method
to `MetadataIndexTemplateService#collectMappings(...)` method.
* Fixed a bug (#58956) that cases timestamp field validation to be performed
for each template and instead of the final mappings that is created.
* only apply _timestamp meta field if index is created as part of a data stream or data stream rollover,
this fixes a docs test, where a regular index creation matches (logs-*) with a template with a data stream definition.
Relates to #58642
Relates to #53100Closes#58956Closes#58583
This makes a `parentCardinality` available to every `Aggregator`'s ctor
so it can make intelligent choices about how it collects bucket values.
This replaces `collectsFromSingleBucket` and is similar to it but:
1. It supports `NONE`, `ONE`, and `MANY` values and is generally
extensible if we decide we can use more precise counts.
2. It is more accurate. `collectsFromSingleBucket` assumed that all
sub-aggregations live under multi-bucket aggregations. This is
normally true but `parentCardinality` is properly carried forward
for single bucket aggregations like `filter` and for multi-bucket
aggregations configured in single-bucket for like `range` with a
single range.
While I was touching every aggregation I renamed `doCreateInternal` to
`createMapped` because that seemed like a much better name and it was
right there, next to the change I was already making.
Relates to #56487
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
In order to ensure that we do not write a broken piece of `RepositoryData`
because the phyiscal repository generation was moved ahead more than one step
by erroneous concurrent writing to a repository we must check whether or not
the current assumed repository generation exists in the repository physically.
Without this check we run the risk of writing on top of stale cached repository data.
Relates #56911
Currently we assert that the reason we fail collecting nodes in this
test is due to the fact that no seeds are available or no connections
could be established to cluster_2. However, the collection could fail if
we cannot establish connections to cluster_1. This commit adds that as
an acceptible assertion.
Today, we send operations in phase2 of peer recoveries batch by batch
sequentially. Normally that's okay as we should have a fairly small of
operations in phase 2 due to the file-based threshold. However, if
phase1 takes a lot of time and we are actively indexing, then phase2 can
have a lot of operations to replay.
With this change, we will send multiple batches concurrently (defaults
to 1) to reduce the recovery time.
Backport of #58018
This commit adds validation that when a composable index template is updated, that the number
of unreferenced data streams does not increase. While it is still possible to have data streams
without a backing template (through snapshot restoration), this reduces the chance of getting
in to that scenario.
Relates to #53100
Currently in the recovery request tracker tests we place the futures
into the future map on the GENERIC thread. It is possible that the test
has already advanced past the point where we block on these futures
before they are placed in the map. This introduces other potential
failures as we expect all futures have been completed. This commit fixes
the test by places the futures in the map prior to dispatching.
The test would try to prepare a `Rounding` even when there aren't any
buckets. This would fail because there is no range over which to prepare
the rounding. It turns out that we don't need the rounding in that case
so we just use `null` then.
Closes#59131
* GET data stream API returns additional information (#59128)
This adds the data stream's index template, the configured ILM policy
(if any) and the health status of the data stream to the GET _data_stream
response.
Restoring a data stream from a snapshot could install a data stream that
doesn't match any composable templates. This also makes the `template`
field in the `GET _data_stream` response optional.
(cherry picked from commit 0d9c98a82353b088c782b6a04c44844e66137054)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
If the recovery source is on an old node (before 7.2), then the recovery
target won't have the safe commit after phase1 because the recovery
source does not send the global checkpoint in the clean_files step. And
if the recovery fails and retries, then the recovery stage won't
transition properly. If a sync_id is used in peer recovery, then the
clean_files step won't be executed to move the stage to TRANSLOG.
Relates ##7187
Closes#57708
This request:
```
POST /_search
{
"aggs": {
"a": {
"adjacency_matrix": {
"filters": {
"1": {
"terms": { "t": { "index": "lookup", "id": "1", "path": "t" } }
}
}
}
}
}
}
```
Would fail with a 500 error and a message like:
```
{
"error": {
"root_cause": [
{
"type": "illegal_state_exception",
"reason":"async actions are left after rewrite"
}
]
}
}
```
This fixes that by moving the query rewrite phase from a synchronous
call on the data nodes into the standard aggregation rewrite phase which
can properly handle the asynchronous actions.
Today we do not allow a node to start if its filesystem is readonly, but
it is possible for a filesystem to become readonly while the node is
running. We don't currently have any infrastructure in place to make
sure that Elasticsearch behaves well if this happens. A node that cannot
write to disk may be poisonous to the rest of the cluster.
With this commit we periodically verify that nodes' filesystems are
writable. If a node fails these writability checks then it is removed
from the cluster and prevented from re-joining until the checks start
passing again.
Closes#45286
Co-authored-by: Bukhtawar Khan <bukhtawar7152@gmail.com>
For #58994 it would be useful to be able to share test infrastructure.
This PR shares `AbstractSnapshotIntegTestCase` for that purpose, dries up SLM tests
accordingly and adds a shared and efficient (compared to the previous implementations)
way of waiting for no running snapshot operations to the test infrastructure to dry things up further.
* Enforce higher priority for RepositoriesService ClusterStateApplier
This avoids shards allocation failures when the repository instance
comes in the same ClusterState update as the shard allocation.
Backport of #58808
This allows pipeline aggregations to participate in the up-front rewrite
phase for searches, in particular, it allows them to load data that they
need asynchronously.
Relates to #58193
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
If the global checkpoint equals max_seq_no, then we won't reset an engine
(as all operations are safe), and max_seqno_of_updates_or_deletes
won't advance to max_seq_no.
Closes#58163
Part of the original PR was merged by #59028
(cherry picked from commit 2598327726124d8a86333f79cdc45bf6a4297dbc)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
Backport of #58582 to 7.x branch.
This commit adds a new metadata field mapper that validates,
that a document has exactly a single timestamp value in the data stream timestamp field and
that the timestamp field mapping only has `type`, `meta` or `format` attributes configured.
Other attributes can affect the guarantee that an index with this meta field mapper has a
useable timestamp field.
The MetadataCreateIndexService inserts a data stream timestamp field mapper whenever
a new backing index of a data stream is created.
Relates to #53100
Dry up tests that use a disruption that isolates the master from all other nodes.
Also, turn disruption types that have neither parameters nor state into constants
to make things a little clearer.
Working through a heap dump for an unrelated issue I found that we can easily rack up
tens of MBs of duplicate empty instances in some cases.
I moved to a static constructor to guard against that in all cases.
Nhat Nguyen
Nik Everett
Armin Braun
Alan Woodward
David Turner
Rory Hunter
Dimitrios Liappis
Mark Tozzi
Christoph Büscher
Ryan Ernst
Yannick Welsch
Lee Hinman
Dan Hermann
markharwood
Jay Modi
Julie Tibshirani
Jim Ferenczi
Martijn van Groningen
Tim Brooks
Francisco Fernández Castaño
Jake Landis
Igor Motov
Andrei Dan
Rene Groeschke
Zachary Tong
James Rodewig
Howard
weizijun
Adrien Grand
David Roberts
Ignacio Vera
Luca Cavanna
Przemyslaw Gomulka
Stéphane Campinas
Tal Levy
Benjamin Trent
Przemko Robakowski
Przemysław Witek
Boice Huang
Rory Hunter
James Baiera
Christos Soulios
Henning Andersen
Alan Woodward
David Kyle
Stuart Tettemer