* Bwc testclusters all (#46265)
Convert all bwc projects to testclusters
* Fix bwc versions config
* WIP fix rolling upgrade
* Fix bwc tests on old versions
* Fix rolling upgrade
When an ML job runs the memory required can be
broken down into:
1. Memory required to load the executable code
2. Instrumented model memory
3. Other memory used by the job's main process or
ancilliary processes that is not instrumented
Previously we added a simple fixed overhead to
account for 1 and 3. This was 100MB for anomaly
detection jobs (large because of the completely
uninstrumented categorization function and
normalize process), and 20MB for data frame
analytics jobs.
However, this was an oversimplification because
the executable code only needs to be loaded once
per machine. Also the 100MB overhead for anomaly
detection jobs was probably too high in most cases
because categorization and normalization don't use
_that_ much memory.
This PR therefore changes the calculation of memory
requirements as follows:
1. A per-node overhead of 30MB for _only_ the first
job of any type to be run on a given node - this
is to account for loading the executable code
2. The established model memory (if applicable) or
model memory limit of the job
3. A per-job overhead of 10MB for anomaly detection
jobs and 5MB for data frame analytics jobs, to
account for the uninstrumented memory usage
This change will enable more jobs to be run on the
same node. It will be particularly beneficial when
there are a large number of small jobs. It will
have less of an effect when there are a small number
of large jobs.
When API key is invalidated we do two things first it tries to trigger `ExpiredApiKeysRemover` task
and second, we do index the invalidation for the API key. The index invalidation may happen
before the `ExpiredApiKeysRemover` task is run and in that case, the API key
invalidated will also get deleted. If the `ExpiredApiKeysRemover` runs before the
API key invalidation is indexed then the API key is not deleted and will be
deleted in the future run.
This behavior was not captured in the tests related to `ExpiredApiKeysRemover`
causing intermittent failures.
This commit fixes those tests by checking if the API key invalidated is reported
back when we get API keys after invalidation and perform the checks based on that.
Closes#41747
The changes introduced in #47179 made it so that we could try to
build an SSLContext with verification mode set to None, which is
not allowed in FIPS 140 JVMs. This commit address that
* Remove eclipse conditionals
We used to have some meta projects with a `-test` prefix because
historically eclipse could not distinguish between test and main
source-sets and could only use a single classpath.
This is no longer the case for the past few Eclipse versions.
This PR adds the necessary configuration to correctly categorize source
folders and libraries.
With this change eclipse can import projects, and the visibility rules
are correct e.x. auto compete doesn't offer classes from test code or
`testCompile` dependencies when editing classes in `main`.
Unfortunately the cyclic dependency detection in Eclipse doesn't seem to
take the difference between test and non test source sets into account,
but since we are checking this in Gradle anyhow, it's safe to set to
`warning` in the settings. Unfortunately there is no setting to ignore
it.
This might cause problems when building since Eclipse will probably not
know the right order to build things in so more wirk might be necesarry.
* Add API to execute SLM retention on-demand (#47405)
This is a backport of #47405
This commit adds the `/_slm/_execute_retention` API endpoint. This
endpoint kicks off SLM retention and then returns immediately.
This in particular allows us to run retention without scheduling it
(for entirely manual invocation) or perform a one-off cleanup.
This commit also includes HLRC for the new API, and fixes an issue
in SLMSnapshotBlockingIntegTests where retention invoked prior to the
test completing could resurrect an index the internal test cluster
cleanup had already deleted.
Resolves#46508
Relates to #43663
* Fix AllocationRoutedStepTests.testConditionMetOnlyOneCopyAllocated
These tests were using randomly generated includes/excludes/requires for
routing, however, it was possible to generate mutually exclusive
allocation settings (about 1 out of 50,000 times for my runs).
This splits the test into three different tests, and removes the
randomization (it doesn't add anything to the testing here) to fix the
issue.
Resolves#47142
Fixes multiple Active Directory related tests that run against the
samba fixture. Some were failing since we changed the realm settings
format in 7.0 and a few were slightly broken in other ways.
We can move to cleanup the tests in a follow up but this work fits
better to be done with or after we move the tests from a Samba
based fixture to a real(-ish) Microsoft Active Directory based
fixture.
Resolves: #33425, #35738
While it seemed like the PUT data frame analytics action did not
have to be a master node action as the config is stored in an index
rather than the cluster state, there are other subtle nuances which
make it worthwhile to convert it. In particular, it helps maintain
order of execution for put actions which are anyhow user driven and
are expected to have low volume.
This commit converts `TransportPutDataFrameAnalyticsAction` from
a handled transport action to a master node action.
Note this means that the action might fail in a mixed cluster
but as the API is still experimental and not widely used there will
be few moments more suitable to make this change than now.
Bulk requests currently do not allow adding "create" actions with auto-generated IDs.
This commit allows using the optype CREATE for append-only indexing operations. This is
mainly the user facing aspect of it.
XPackPlugin holds data in statics and can only be initialized once. This
caused tests to fail primarily when running with a low max-workers.
Replaced usages with the LocalStateCompositeXPackPlugin, which handles
this properly for testing.
Due to #47003 many clusters will have built up a
large backlog of expired results. On upgrading to
a version where that bug is fixed users could find
that the first ML daily maintenance task deletes
a very large amount of documents.
This change introduces throttling to the
delete-by-query that the ML daily maintenance uses
to delete expired results to limit it to deleting an
average 200 documents per second. (There is no
throttling for state/forecast documents as these
are expected to be lower volume.)
Additionally a rough time limit of 8 hours is applied
to the whole delete expired data action. (This is only
rough as it won't stop part way through a single
operation - it only checks the timeout between
operations.)
Relates #47103
This commit restores the model state if available in data
frame analytics jobs.
In addition, this changes the start API so that a stopped job
can be restarted. As we now store the progress in the state index
when the task is stopped, we can use it to determine what state
the job was in when it got stopped.
Note that in order to be able to distinguish between a job
that runs for the first time and another that is restarting,
we ensure reindexing progress is reported to be at least 1
for a running task.
Due to a regression bug the metadata Active Directory realm
setting is ignored (it works correctly for the LDAP realm type).
This commit redresses it.
Closes#45848
DATE_PART(<datetime unit>, <date/datetime>) is a function that allows
the user to extract the specified unit from a date/datetime field
similar to the EXTRACT (<datetime unit> FROM <date/datetime>) but
with different names and aliases for the units and it also provides more
options like `DATE_PART('tzoffset', datetimeField)`.
Implemented following the SQL server's spec: https://docs.microsoft.com/en-us/sql/t-sql/functions/datepart-transact-sql?view=sql-server-2017
with the difference that the <datetime unit> argument is either a
literal single quoted string or gets a value from a table field, whereas
in SQL server keywords are used (unquoted identifiers) and it's not
possible to use a value coming for a table column.
Closes: #46372
(cherry picked from commit ead743d3579eb753fd314d4a58fae205e465d72e)
* [ML][Inference] adding .ml-inference* index and storage (#47267)
* [ML][Inference] adding .ml-inference* index and storage
* Addressing PR comments
* Allowing null definition, adding validation tests for model config
* fixing line length
* adjusting for backport
Fixes multiple Active Directory related tests that run against the
samba fixture. Some were failing since we changed the realm settings
format in 7.0 and a few were slightly broken in other ways.
We can move to cleanup the tests in a follow up but this work fits
better to be done with or after we move the tests from a Samba
based fixture to a real(-ish) Microsoft Active Directory based
fixture.
Resolves: #33425, #35738
- Build paths with PathUtils#get instead of hard-coding a string with
forward slashes.
- Do not try to match the whole message that includes paths. The
file separator is `\\` in windows but when we throw an Elasticsearch
Exception, the message is formatted with LoggerMessageFormat#format
which replaces `\\` with `\` in Path names. That means that in Windows
the Exception message will contain paths with single backslashes while
the expected string that comes from Path#toString on filename and
env.configFile will contain double backslashes. There is no point in
attempting to match the whole message string for the purpose of this test.
Resolves: #45598
Add examples of failures for both sql and csv integeration
tests and instructions on how to mute them.
(cherry picked from commit 591bba46516d770f5fc95a4c536dd7448b74dd49)
As a result of #45689 snapshot finalization started to
take significantly longer than before. This may be a
little unfortunate since it increases the likelihood
of failing to finalize after having written out all
the segment blobs.
This change parallelizes all the metadata writes that
can safely run in parallel in the finalization step to
speed the finalization step up again. Also, this will
generally speed up the snapshot process overall in case
of large number of indices.
This is also a nice to have for #46250 since we add yet
another step (deleting of old index- blobs in the shards
to the finalization.
When an integration test fails before the assertion of the results it's
missing information, like the file name and the line in the file where
the test resides.
(cherry picked from commit 683dc7213311d13c81e06829e08f3f9f80ebf73a)
With this change the test setup for ML config upgrade
tests only waits for v6.6+ ML index templates to be
installed if the old cluster is running version 6.6.0
or higher.
Previously it was always waiting, but timing out without
failing the test if the templates were not installed
within 10 seconds, effectively just adding a pointless
10 second sleep to BWC tests against versions earlier
than 6.6.0. This problem was exposed by #47112.
Fixes#47286
Previously, if a column (field, scalar, alias) appeared more than once in the
SELECT list, the value was returned only once (1st appearance) in each row.
Fixes: #41811
(cherry picked from commit 097ea36581a751605fc4f2088319d954ce35b5d1)
Currently the policy config is placed directly in the json object
of the toplevel `policies` array field. For example:
```
{
"policies": [
{
"match": {
"name" : "my-policy",
"indices" : ["users"],
"match_field" : "email",
"enrich_fields" : [
"first_name",
"last_name",
"city",
"zip",
"state"
]
}
}
]
}
```
This change adds a `config` field in each policy json object:
```
{
"policies": [
{
"config": {
"match": {
"name" : "my-policy",
"indices" : ["users"],
"match_field" : "email",
"enrich_fields" : [
"first_name",
"last_name",
"city",
"zip",
"state"
]
}
}
}
]
}
```
This allows us in the future to add other information about policies
in the get policy api response.
The UI will consume this API to build an overview of all policies.
The UI may in the future include additional information about a policy
and the plan is to include that in the get policy api, so that this
information can be gathered in a single api call.
An example of the information that is likely to be added is:
* Last policy execution time
* The status of a policy (executing, executed, unexecuted)
* Information about the last failure if exists
A refactoring in 6.6 meant that the ML daily
maintenance actions have not been run at all
since then. This change installs the local
master listener that schedules the ML daily
maintenance, and also defends against some
subtle race conditions that could occur in the
future if a node flipped very quickly between
master and non-master.
Fixes#47003
These settings were using get raw to fallback to whether or not SSL is
enabled. Yet, we have a formal mechanism for falling back to a
setting. This commit cuts over to that formal mechanism.
When we added support for wildcard application names, we started to build
the prefix query along with the term query but we used 'filter' clause
instead of 'should', so this would not fetch the correct application
privilege descriptor thereby failing the _has_privilege checks.
This commit changes the clause to use should and with minimum_should_match
as 1.
This commit adds the documentation to point the user that when one
creates API keys with no role descriptor specified then that API
key will have a point in time snapshot of user permissions.
Closes#46876
Backport of #45794 to 7.x. Convert most `awaitBusy` calls to
`assertBusy`, and use asserts where possible. Follows on from #28548 by
@liketic.
There were a small number of places where it didn't make sense to me to
call `assertBusy`, so I kept the existing calls but renamed the method to
`waitUntil`. This was partly to better reflect its usage, and partly so
that anyone trying to add a new call to awaitBusy wouldn't be able to find
it.
I also didn't change the usage in `TransportStopRollupAction` as the
comments state that the local awaitBusy method is a temporary
copy-and-paste.
Other changes:
* Rework `waitForDocs` to scale its timeout. Instead of calling
`assertBusy` in a loop, work out a reasonable overall timeout and await
just once.
* Some tests failed after switching to `assertBusy` and had to be fixed.
* Correct the expect templates in AbstractUpgradeTestCase. The ES
Security team confirmed that they don't use templates any more, so
remove this from the expected templates. Also rewrite how the setup
code checks for templates, in order to give more information.
* Remove an expected ML template from XPackRestTestConstants The ML team
advised that the ML tests shouldn't be waiting for any
`.ml-notifications*` templates, since such checks should happen in the
production code instead.
* Also rework the template checking code in `XPackRestTestHelper` to give
more helpful failure messages.
* Fix issue in `DataFrameSurvivesUpgradeIT` when upgrading from < 7.4
We disable MSU optimization if the local checkpoint is smaller than
max_seq_no_of_updates. Hence, we need to relax the MSU assertion in
FollowingEngine for that scenario. Suppose the leader has three
operations: index-0, delete-1, and index-2 for the same doc Id. MSU on
the leader is 1 as index-2 is an append. If the follower applies index-0
then index-2, then the assertion is violated.
Closes#47137
To be on the safe side in terms of use cases also add the alias
DATETRUNC to the DATE_TRUNC function.
Follows: #46473
(cherry picked from commit 9ac223cb1fc66486f86e218fa785a32b61e9bacc)
Drop the usage of `SimpleDateFormat` and use the `DateFormatter` instead
(cherry picked from commit 7cf509a7a11ecf6c40c44c18e8f03b8e81fcd1c2)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
In some cases, the fetch size affects the way the groups are returned
causing the last page to go beyond the limit. Add dedicated check to
prevent extra data from being returned.
Fix#47002
(cherry picked from commit f4c29646f097bbd29855300342823ef4cef61c05)
Enables support for Cartesian geometries shape type. We still need to
decide how to handle the distance function since it is currently using
the haversine distance formula and returns results in meters, which
doesn't make any sense for Cartesian geometries.
Closes#46412
Relates to #43644
When the ML native multi-node tests use _cat/indices/_all
and the request goes to a non-master node, _all is
translated to a list of concrete indices by the authz layer
on the coordinating node before the request is forwarded
to the master node. Then it is possible for the master
node to return an index_not_found_exception if one of
the concrete indices that was expanded on the
coordinating node has been deleted in the meantime.
(#47159 has been opened to track the underlying problem.)
It has been observed that the index that gets deleted when
the problem affects the ML native multi-node tests is
always the ML notifications index. The tests that fail are
only interested in the presence or absense of ML results
indices. Therefore the workaround is to only _cat indices
that match the ML results index pattern.
Fixes#45652
This change also slightly modifies the stats response,
so that is can easier consumer by monitoring and other
users. (coordinators stats are now in a list instead of
a map and has an additional field for the node id)
Relates to #32789
In the current implementation, the validation of the role query
occurs at runtime when the query is being executed.
This commit adds validation for the role query when creating a role
but not for the template query as we do not have the runtime
information required for evaluating the template query (eg. authenticated user's
information). This is similar to the scripts that we
store but do not evaluate or parse if they are valid queries or not.
For validation, the query is evaluated (if not a template), parsed to build the
QueryBuilder and verify if the query type is allowed.
Closes#34252
This change merges the `ShardSearchTransportRequest` and `ShardSearchLocalRequest`
into a single `ShardSearchRequest` that can be used to create a SearchContext.
Relates #46523
This commit adds support for POST requests to the SLM `_execute` API,
because POST is a more appropriate HTTP verb for this action as it is
not idempotent. The docs are also changed to favor POST over PUT,
although PUT is not removed or officially deprecated.
* ILM: parse origination date from index name (#46755)
Introduce the `index.lifecycle.parse_origination_date` setting that
indicates if the origination date should be parsed from the index name.
If set to true an index which doesn't match the expected format (namely
`indexName-{dateFormat}-optional_digits` will fail before being created.
The origination date will be parsed when initialising a lifecycle for an
index and it will be set as the `index.lifecycle.origination_date` for
that index.
A user set value for `index.lifecycle.origination_date` will always
override a possible parsable date from the index name.
(cherry picked from commit c363d27f0210733dad0c307d54fa224a92ddb569)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
* Drop usage of Map.of to be java 8 compliant
* Wait for snapshot completion in SLM snapshot invocation
This changes the snapshots internally invoked by SLM to wait for
completion. This allows us to capture more snapshotting failure
scenarios.
For example, previously a snapshot would be created and then registered
as a "success", however, the snapshot may have been aborted, or it may
have had a subset of its shards fail. These cases are now handled by
inspecting the response to the `CreateSnapshotRequest` and ensuring that
there are no failures. If any failures are present, the history store
now stores the action as a failure instead of a success.
Relates to #38461 and #43663
Using arrays of objects with embedded IDs is preferred for new APIs over
using entity IDs as JSON keys. This commit changes the SLM stats API to
use the preferred format.
* [ML][Inference] Feature pre-processing objects and functions (#46777)
To support inference on pre-trained machine learning models, some basic feature encoding will be necessary. I am using a named object serialization approach so new encodings/pre-processing steps could be added in the future.
This PR lays down the ground work for 3 basic encodings:
* HotOne
* Target Mean
* Frequency
More feature encodings or pre-processings could be added in the future:
* Handling missing columns
* Standardization
* Label encoding
* etc....
* fixing compilation for namedxcontent tests
This commit clarifies and points out that the Role management UI and
the Role management API cannot be used to manage roles that are
defined in roles.yml and that file based role management is
intended to have a small administrative scope and not handle all
possible RBAC use cases.
This change allows for the caller of the `saml/prepare` API to pass
a `relay_state` parameter that will then be part of the redirect
URL in the response as the `RelayState` query parameter.
The SAML IdP is required to reflect back the value of that relay
state when sending a SAML Response. The caller of the APIs can
then, when receiving the SAML Response, read and consume the value
as it see fit.
This change adds a check to the migration tool that warns about the deprecated
`enabled` setting for the `_field_names` field on 7.x indices and issues a
warning for templates containing this setting, which has been removed
with 8.0.
Relates to #42854, #46681
When we rewrite alias requests, after filtering down to only those that
the user is authorized to see, it can be that there are no aliases
remaining in the request. However, core Elasticsearch interprets this as
_all so the user would see more than they are authorized for. To address
this, we previously rewrote all such requests to have aliases `"*"`,
`"-*"`, which would be interpreted when aliases are resolved as
nome. Yet, this is only needed for get aliases requests and we were
applying it to all alias requests, including remove index requests. If
such a request was sent to a coordinating node that is not the master
node, the request would be rewritten to include `"*"` and `"-*"`, and
then the master would authorize the user for these. If the user had
limited permissions, the request would fail, even if they were
authorized on the index that the remove index action was over. This
commit addresses this by rewriting for get aliases and remove
aliases request types but not for the remove index.
Co-authored-by: Albert Zaharovits <albert.zaharovits@elastic.co>
Co-authored-by: Tim Vernum <tim@adjective.org>
This change works around JDK-8213202, which is a bug related to TLSv1.3
session resumption before JDK 11.0.3 that occurs when there are
multiple concurrent sessions being established. Nodes connecting to
each other will trigger this bug when client authentication is
disabled, which is the case for SSLClientAuthTests.
Backport of #46680
Previously, queries on the _index field were not able to specify index aliases.
This was a regression in functionality compared to the 'indices' query that was
deprecated and removed in 6.0.
Now queries on _index can specify an alias, which is resolved to the concrete
index names when we check whether an index matches. To match a remote shard
target, the pattern needs to be of the form 'cluster:index' to match the
fully-qualified index name. Index aliases can be specified in the following query
types: term, terms, prefix, and wildcard.
This commit replaces the SearchContext used in AbstractQueryTestCase with
a QueryShardContext in order to reduce the visibility of search contexts.
Relates #46523
Add initial PIVOT support for transforming a regular table into a
statistics table around an arbitrary pivoting column:
SELECT * FROM
(SELECT languages, country, salary, FROM mp)
PIVOT (AVG(salary) FOR countries IN ('NL', 'DE', 'ES', 'RO', 'US'))
In the current implementation PIVOT allows only one aggregation however
this restriction is likely to be lifted in the future.
Also not all aggregations are working, in particular MatrixStats are not yet supported.
(cherry picked from commit d91263746a222915c570d4a662ec48c1d6b4f583)
This PR adds some restrictions around testfixtures to make sure the same service ( as defiend in docker-compose.yml ) is not shared between multiple projects.
Sharing would break running with --parallel.
Projects can still share fixtures as long as each has it;s own service within.
This is still useful to share some of the setup and configuration code of the fixture.
Project now also have to specify a service name when calling useCluster to refer to a specific service.
If this is not the case all services will be claimed and the fixture can't be shared.
For this reason fixtures have to explicitly specify if they are using themselves ( fixture and tests in the same project ).
This commit changes the GET REST api so it will accept an optional comma
separated list of enrich policy ids. This change also modifies the
behavior of the GET API in that it will not error if it is passed a bad
enrich id anymore, but will instead just return an empty list.
This commit adds the ability to require an ingest pipeline on an
index. Today we can have a default pipeline, but that could be
overridden by a request pipeline parameter. This commit introduces a new
index setting index.required_pipeline that acts similarly to
index.default_pipeline, except that it can not be overridden by a
request pipeline parameter. Additionally, a default pipeline and a
request pipeline can not both be set. The required pipeline can be set
to _none to ensure that no pipeline ever runs for index requests on that
index.
When using auto-generated IDs + the ingest drop processor (which looks to be used by filebeat
as well) + coordinating nodes that do not have the ingest processor functionality, this can lead
to a NullPointerException.
The issue is that markCurrentItemAsDropped() is creating an UpdateResponse with no id when
the request contains auto-generated IDs. The response serialization is lenient for our
REST/XContent format (i.e. we will send "id" : null) but the internal transport format (used for
communication between nodes) assumes for this field to be non-null, which means that it can't
be serialized between nodes. Bulk requests with ingest functionality are processed on the
coordinating node if the node has the ingest capability, and only otherwise sent to a different
node. This means that, in order to reproduce this, one needs two nodes, with the coordinating
node not having the ingest functionality.
Closes#46678
The fact that this test randomly uses a relatively large number
of nodes and hence Netty worker threads created a problem with
running out of direct memory on CI.
Tests run with 512M heap (and hence 512M direct memory) by default.
On a CI worker with 16 cores, this means Netty will by default set
up 32 transport workers. If we get unlucky and a lot of them
actually do work (and thus instantiate a `CopyBytesSocketChannel`
which costs 1M per thread for the thread-local IO buffer) we
would run out of memory.
This specific failure was only seen with `NativeRealmIntegTests` so I
only added the constraint on the Netty worker count here.
We can add it to other tests (or `SecurityIntegTestCase`) if need be
but for now it doesn't seem necessary so I opted for least impact.
Closes#46803
This commit reuses the same state processor that is used for autodetect
to parse state output from data frame analytics jobs. We then index the
state document into the state index.
Backport of #46804
* [ML][Transforms] remove `force` flag from _start (#46414)
* [ML][Transforms] remove `force` flag from _start
* fixing expected error message
* adjusting bwc version
It is possible for a running analytics job that its config is removed
from the '.ml-config' index (perhaps the user deleted the entire index,
etc.). In that case the task remains without a matching config. I have
raised #46781 to discuss how to deal with this issue.
This commit focuses on `MlMemoryTracker` and changes it so that when
we get the configs for the running tasks we leniently ignore missing ones.
This at least means memory tracking will keep working for other jobs
if one or more are missing.
In addition, this commit makes the cleanup code for native analytics
tests more robust by explicitly stopping all jobs and force-stopping
if an error occurs. This helps so that a single failing test does
not cause other tests fail due to pending tasks.
Backport of #46789
Since the `resolveAllDependencies` task resolves all the congfigurations
it can find, this was not caught by our testing, but it's required to be
configuraed specifically.
We should probably cut-over to the new configurations at some point to
avoid problems like this.
Closeselastic/infra#14580
* Give kibana user reserved role privileges on .apm-* to create APM agent configuration index.
* fixed test to include checking all .apm-* permissions
* changed pattern from ".apm-*" to the more specific ".apm-agent-configuration"
When encountering only indices with empty mapping, the IndexResolver
throws an exception as it expects to find at least one entry.
This commit fixes this case so that an empty mapping is returned.
Fix#46757
(cherry picked from commit 5f4f5807acb93b5fab36718c092c328977a396b6)
* Write metadata during snapshot finalization after segment files to prevent outdated metadata in case of dynamic mapping updates as explained in #41581
* Keep the old behavior of writing the metadata beforehand in the case of mixed version clusters for BwC reasons
* Still overwrite the metadata in the end, so even a mixed version cluster is fixed by this change if a newer version master does the finalization
* Fixes#41581
Handle queries with implicit GROUP BY where the aggregation is not in
the projection/SELECT but inside the filter/HAVING such as:
SELECT 1 FROM x HAVING COUNT(*) > 0
The engine now properly identifies the case and handles it accordingly.
Fix#37051
(cherry picked from commit fa53ca05d8219c27079b50b4a5b7aeb220c7cde2)
Improve the defensive behavior of ResultSet when dealing with incorrect
API usage. In particular handle the case of dealing with no row
available (either because the cursor is before the first entry or after
the last).
Fix#46750
(cherry picked from commit 58fa38e4606625962e879265d35eacb0960c6cdb)
* [ILM] Add date setting to calculate index age
Add the `index.lifecycle.origination_date` to allow users to configure a
custom date that'll be used to calculate the index age for the phase
transmissions (as opposed to the default index creation date).
This could be useful for users to create an index with an "older"
origination date when indexing old data.
Relates to #42449.
* [ILM] Don't override creation date on policy init
The initial approach we took was to override the lifecycle creation date
if the `index.lifecycle.origination_date` setting was set. This had the
disadvantage of the user not being able to update the `origination_date`
anymore once set.
This commit changes the way we makes use of the
`index.lifecycle.origination_date` setting by checking its value when
we calculate the index age (ie. at "read time") and, in case it's not
set, default to the index creation date.
* Make origination date setting index scope dynamic
* Document orignation date setting in ilm settings
(cherry picked from commit d5bd2bb77ee28c1978ab6679f941d7c02e389d32)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
When the stop API is called while the task is running there is
a chance the task gets marked completed twice. This may cause
undesired side effects, like indexing the progress document a second
time after the stop API has returned (the cause for #46705).
This commit adds a check that the task has not been completed before
proceeding to mark it so. In addition, when we update the task's state
we could get some warnings that the task was missing if the stop API
has been called in the meantime. We now check the errors are
`ResourceNotFoundException` and ignore them if so.
Closes#46705
Backports #46721
We renew the CCR retention lease at a fixed interval, therefore it's
possible to have more than one in-flight renewal requests at the same
time. If requests arrive out of order, then the assertion is violated.
Closes#46416Closes#46013
This is fixing a bug where if an analytics job is started before any
anomaly detection job is opened, we create an index after the state
write alias.
Instead, we should create the state index and alias before starting
an analytics job and this commit makes sure this is the case.
Backport of #46602
This makes the AllocatedPersistentTask#init() method protected so that
implementing classes can perform their initialization logic there,
instead of the constructor. Rollup's task is adjusted to use this
init method.
It also slightly refactors the methods to se a static logger in the
AllocatedTask instead of passing it in via an argument. This is
simpler, logged messages come from the task instead of the
service, and is easier for tests
DATE_TRUNC(<truncate field>, <date/datetime>) is a function that allows
the user to truncate a timestamp to the specified field by zeroing out
the rest of the fields. The function is implemented according to the
spec from PostgreSQL: https://www.postgresql.org/docs/current/functions-datetime.html#FUNCTIONS-DATETIME-TRUNCCloses: #46319
(cherry picked from commit b37e96712db1aace09f17b574eb02ff6b942a297)
The sql project uses a common set of security tests, which are run in
subprojects. Currently these are shared through a shared directory, but
this is not setup correctly to ensure it is built before tests run. This
commit changes the test classes to be an artifact of the sql/qa/security
project and makes the test runner use the built artifact (a directory of
classes) for tests.
closes#45866
Since the `IndicesSegmentsRequest` scatters to all shards for the index,
it's possible that some of the shards may fail. This adds failure
handling and logging (since this is a best-effort step in the first
place) for this case.
Many scalar functions try to find out the common type between their
arguments in order to set it as their return time, e.g.:
for `float + double` the common type which is set as the return type
of the + operation is `double`.
Previously, for data types TEXT and KEYWORD (string data types) there
was no common data type found and null was returned causing NPEs when
the function was trying to resolve the return data type.
Fixes: #46551
(cherry picked from commit 291017d69dfc810707c3c7c692f5a50af431b790)
This commit adds a wait/check for all running snapshots to be cleared
before taking another snapshot. The previous snapshot was successful but
had not yet been cleared from the cluster state, so the second snapshot
failed due to a `ConcurrentSnapshotException`.
Resolves#46508
After starting the analytics job and checking its state
the state can be any of "started", "reindexing" or
"analyzing" depending on how quickly the work is done.
When upgrading data nodes to a newer version before
master nodes there was a risk that a transform running
on an upgraded data node would index a document into
the new transforms internal index before its index
template was created. This would cause the index to
be created with entirely dynamic mappings.
This change introduces a check before indexing any
internal transforms document to ensure that the required
index template exists and create it if it doesn't.
Backport of #46553
This commit replaces the `SearchContext` with the `QueryShardContext` when building aggregator factories. Aggregator factories are part of the `SearchContext` so they shouldn't require a `SearchContext` to create them.
The main changes here are the signatures of `AggregationBuilder#build` that now takes a `QueryShardContext` and `AggregatorFactory#createInternal` that passes the `SearchContext` to build the `Aggregator`.
Relates #46523
rename data frame transform plugin to transform:
- rename plugin data-frame to transform
- change all package names from o.e.*.dataframe.* to o.e.*.transform.*
- necessary changes to fix loading/testing
* More Efficient Ordering of Shard Upload Execution (#42791)
* Change the upload order of of snapshots to work file by file in parallel on the snapshot pool instead of merely shard-by-shard
* Inspired by #39657
* Cleanup BlobStoreRepository Abort and Failure Handling (#46208)
The enrich api returns enrich coordinator stats and
information about currently executing enrich policies.
The coordinator stats include per ingest node:
* The current number of search requests in the queue.
* The total number of outstanding remote requests that
have been executed since node startup. Each remote
request is likely to include multiple search requests.
This depends on how much search requests are in the
queue at the time when the remote request is performed.
* The number of current outstanding remote requests.
* The total number of search requests that `enrich`
processors have executed since node startup.
The current execution policies stats include:
* The name of policy that is executing
* A full blow task info object that is executing the policy.
Relates to #32789
This change adds an IndexSearcher and the node's BigArrays in the QueryShardContext.
It's a spin off of #46527 as this change is required to allow aggregation builder to solely use the
query shard context.
Relates #46523
Investigating the test failure reported in #45518 it appears that
the datafeed task was not found during a tast state update. There
are only two places where such an update is performed: when we set
the state to `started` and when we set it to `stopping`. We handle
`ResourceNotFoundException` in the latter but not in the former.
Thus the test reveals a rare race condition where the datafeed gets
requested to stop before we managed to update its state to `started`.
I could not reproduce this scenario but it would be my best guess.
This commit catches `ResourceNotFoundException` while updating the
state to `started` and lets the task terminate smoothly.
Closes#45518
Backport of #46495
We depend on file realms being unique in a number of places. Pre
7.0 this was enforced by the fact that the multiple realm types
with different name would mean identical configuration keys and
cause configuration parsing errors. Since we intoduced affix
settings for realms this is not the case any more as the realm type
is part of the configuration key.
This change adds a check when building realms which will explicitly
fail if multiple realms are defined with the same name.
Backport of #46253
This changes API-Key authentication to always fallback to the realm
chain if the API key is not valid. The previous behaviour was
inconsistent and would terminate on some failures, but continue to the
realm chain for others.
Backport of: #46538
This class has been using a logger configured for a different class for
quite a while. While the circumstance in which it logs is rare, it
should still use the correct logger.
* Add retention to Snapshot Lifecycle Management (#46407)
This commit adds retention to the existing Snapshot Lifecycle Management feature (#38461) as described in #43663. This allows a user to configure SLM to automatically delete older snapshots based on a number of criteria.
An example policy would look like:
```
PUT /_slm/policy/snapshot-every-day
{
"schedule": "0 30 2 * * ?",
"name": "<production-snap-{now/d}>",
"repository": "my-s3-repository",
"config": {
"indices": ["foo-*", "important"]
},
// Newly configured retention options
"retention": {
// Snapshots should be deleted after 14 days
"expire_after": "14d",
// Keep a maximum of thirty snapshots
"max_count": 30,
// Keep a minimum of the four most recent snapshots
"min_count": 4
}
}
```
SLM Retention is run on a scheduled configurable with the `slm.retention_schedule` setting, which supports cron expressions. Deletions are run for a configurable time bounded by the `slm.retention_duration` setting, which defaults to 1 hour.
Included in this work is a new SLM stats API endpoint available through
``` json
GET /_slm/stats
```
That returns statistics about snapshot taken and deleted, as well as successful retention runs, failures, and the time spent deleting snapshots. #45362 has more information as well as an example of the output. These stats are also included when retrieving SLM policies via the API.
* Add base framework for snapshot retention (#43605)
* Add base framework for snapshot retention
This adds a basic `SnapshotRetentionService` and `SnapshotRetentionTask`
to start as the basis for SLM's retention implementation.
Relates to #38461
* Remove extraneous 'public'
* Use a local var instead of reading class var repeatedly
* Add SnapshotRetentionConfiguration for retention configuration (#43777)
* Add SnapshotRetentionConfiguration for retention configuration
This commit adds the `SnapshotRetentionConfiguration` class and its HLRC
counterpart to encapsulate the configuration for SLM retention.
Currently only a single parameter is supported as an example (we still
need to discuss the different options we want to support and their
names) to keep the size of the PR down. It also does not yet include version serialization checks
since the original SLM branch has not yet been merged.
Relates to #43663
* Fix REST tests
* Fix more documentation
* Use Objects.equals to avoid NPE
* Put `randomSnapshotLifecyclePolicy` in only one place
* Occasionally return retention with no configuration
* Implement SnapshotRetentionTask's snapshot filtering and delet… (#44764)
* Implement SnapshotRetentionTask's snapshot filtering and deletion
This commit implements the snapshot filtering and deletion for
`SnapshotRetentionTask`. Currently only the expire-after age is used for
determining whether a snapshot is eligible for deletion.
Relates to #43663
* Fix deletes running on the wrong thread
* Handle missing or null policy in snap metadata differently
* Convert Tuple<String, List<SnapshotInfo>> to Map<String, List<SnapshotInfo>>
* Use the `OriginSettingClient` to work with security, enhance logging
* Prevent NPE in test by mocking Client
* Allow empty/missing SLM retention configuration (#45018)
Semi-related to #44465, this allows the `"retention"` configuration map
to be missing.
Relates to #43663
* Add min_count and max_count as SLM retention predicates (#44926)
This adds the configuration options for `min_count` and `max_count` as
well as the logic for determining whether a snapshot meets this criteria
to SLM's retention feature.
These options are optional and one, two, or all three can be specified
in an SLM policy.
Relates to #43663
* Time-bound deletion of snapshots in retention delete function (#45065)
* Time-bound deletion of snapshots in retention delete function
With a cluster that has a large number of snapshots, it's possible that
snapshot deletion can take a very long time (especially since deletes
currently have to happen in a serial fashion). To prevent snapshot
deletion from taking forever in a cluster and blocking other operations,
this commit adds a setting to allow configuring a maximum time to spend
deletion snapshots during retention. This dynamic setting defaults to 1
hour and is best-effort, meaning that it doesn't hard stop a deletion
at an hour mark, but ensures that once the time has passed, all
subsequent deletions are deferred until the next retention cycle.
Relates to #43663
* Wow snapshots suuuure can take a long time.
* Use a LongSupplier instead of actually sleeping
* Remove TestLogging annotation
* Remove rate limiting
* Add SLM metrics gathering and endpoint (#45362)
* Add SLM metrics gathering and endpoint
This commit adds the infrastructure to gather metrics about the different SLM actions that a cluster
takes. These actions are stored in `SnapshotLifecycleStats` and perpetuated in cluster state. The
stats stored include the number of snapshots taken, failed, deleted, the number of retention runs,
as well as per-policy counts for snapshots taken, failed, and deleted. It also includes the amount
of time spent deleting snapshots from SLM retention.
This commit also adds an endpoint for retrieving all stats (further commits will expose this in the
SLM get-policy API) that looks like:
```
GET /_slm/stats
{
"retention_runs" : 13,
"retention_failed" : 0,
"retention_timed_out" : 0,
"retention_deletion_time" : "1.4s",
"retention_deletion_time_millis" : 1404,
"policy_metrics" : {
"daily-snapshots2" : {
"snapshots_taken" : 7,
"snapshots_failed" : 0,
"snapshots_deleted" : 6,
"snapshot_deletion_failures" : 0
},
"daily-snapshots" : {
"snapshots_taken" : 12,
"snapshots_failed" : 0,
"snapshots_deleted" : 12,
"snapshot_deletion_failures" : 6
}
},
"total_snapshots_taken" : 19,
"total_snapshots_failed" : 0,
"total_snapshots_deleted" : 18,
"total_snapshot_deletion_failures" : 6
}
```
This does not yet include HLRC for this, as this commit is quite large on its own. That will be
added in a subsequent commit.
Relates to #43663
* Version qualify serialization
* Initialize counters outside constructor
* Use computeIfAbsent instead of being too verbose
* Move part of XContent generation into subclass
* Fix REST action for master merge
* Unused import
* Record history of SLM retention actions (#45513)
This commit records the deletion of snapshots by the retention component
of SLM into the SLM history index for the purposes of reviewing operations
taken by SLM and alerting.
* Retry SLM retention after currently running snapshot completes (#45802)
* Retry SLM retention after currently running snapshot completes
This commit adds a ClusterStateObserver to wait until the currently
running snapshot is complete before proceeding with snapshot deletion.
SLM retention waits for the maximum allowed deletion time for the
snapshot to complete, however, the waiting time is not factored into
the limit on actual deletions.
Relates to #43663
* Increase timeout waiting for snapshot completion
* Apply patch
From 2374316f0d.patch
* Rename test variables
* [TEST] Be less strict for stats checking
* Skip SLM retention if ILM is STOPPING or STOPPED (#45869)
This adds a check to ensure we take no action during SLM retention if
ILM is currently stopped or in the process of stopping.
Relates to #43663
* Check all actions preventing snapshot delete during retention (#45992)
* Check all actions preventing snapshot delete during retention run
Previously we only checked to see if a snapshot was currently running,
but it turns out that more things can block snapshot deletion. This
changes the check to be a check for:
- a snapshot currently running
- a deletion already in progress
- a repo cleanup in progress
- a restore currently running
This was found by CI where a third party delete in a test caused SLM
retention deletion to throw an exception.
Relates to #43663
* Add unit test for okayToDeleteSnapshots
* Fix bug where SLM retention task would be scheduled on every node
* Enhance test logging
* Ignore if snapshot is already deleted
* Missing import
* Fix SnapshotRetentionServiceTests
* Expose SLM policy stats in get SLM policy API (#45989)
This also adds support for the SLM stats endpoint to the high level rest client.
Retrieving a policy now looks like:
```json
{
"daily-snapshots" : {
"version": 1,
"modified_date": "2019-04-23T01:30:00.000Z",
"modified_date_millis": 1556048137314,
"policy" : {
"schedule": "0 30 1 * * ?",
"name": "<daily-snap-{now/d}>",
"repository": "my_repository",
"config": {
"indices": ["data-*", "important"],
"ignore_unavailable": false,
"include_global_state": false
},
"retention": {}
},
"stats": {
"snapshots_taken": 0,
"snapshots_failed": 0,
"snapshots_deleted": 0,
"snapshot_deletion_failures": 0
},
"next_execution": "2019-04-24T01:30:00.000Z",
"next_execution_millis": 1556048160000
}
}
```
Relates to #43663
* Rewrite SnapshotLifecycleIT as as ESIntegTestCase (#46356)
* Rewrite SnapshotLifecycleIT as as ESIntegTestCase
This commit splits `SnapshotLifecycleIT` into two different tests.
`SnapshotLifecycleRestIT` which includes the tests that do not require
slow repositories, and `SLMSnapshotBlockingIntegTests` which is now an
integration test using `MockRepository` to simulate a snapshot being in
progress.
Relates to #43663Resolves#46205
* Add error logging when exceptions are thrown
* Update serialization versions
* Fix type inference
* Use non-Cancellable HLRC return value
* Fix Client mocking in test
* Fix SLMSnapshotBlockingIntegTests for 7.x branch
* Update SnapshotRetentionTask for non-multi-repo snapshot retrieval
* Add serialization guards for SnapshotLifecyclePolicy
The previous transport action was a read action, which under the right
set of circumstances can execute on a coordinating node. This commit
ensures that cannot happen.
This commit changes the SSLContext for the email server we use in
the tests so that it loads its key material from an in memory
keystore (that is in turn built from a pair of PEM encoded private key
and certificate) instead of a PKCS#12 one. This is done so that when
we run our tests in FIPS 140-2 JVMs, the keystore is of a type that the
Security Provider actually supports.
This also mutes testCanSendMessageToSmtpServerByDisablingVerification
as we can't run tests with verification set to `none` in FIPS 140
JVMs.
* Fix issue with painless scripting not being correctly generated when
datetime functions are used for GROUPing of an INTERVAL operation.
(cherry picked from commit cb92828e8ec9d9d241bd6189e5835fd99f8b9a44)
ML users who upgrade from versions prior to 7.4 to 7.4 or later
will have ML results indices that do not have mappings for the
total_search_time_ms field. Therefore, when searching these
indices we must tolerate this field not having a mapping.
Fixes#46437
This refactors `DataFrameAnalyticsTask` into its own class.
The task has quite a lot of functionality now and I believe it would
make code more readable to have it live as its own class rather than
an inner class of the start action class.
Backport of #46402
* [ML][Transforms] fixing rolling upgrade continuous transform test (#45823)
* [ML][Transforms] fixing rolling upgrade continuous transform test
* adjusting wait assert logic
* adjusting wait conditions
* [ML][Transforms] allow executor to call start on started task (#46347)
* making sure we only upgrade from 7.4.0 in test
* [ML] waiting for ml indices before waiting task assignment testFullClusterRestart
* waiting for a stable cluster after fullrestart
* removing unused imports
This commit initializes DocumentSubsetBitsetCache even if DLS
is disabled. Previously it would throw null pointer when querying
usage stats if we explicitly disabled DLS as there would be no instance of DocumentSubsetBitsetCache to query. It is okay to initialize
DocumentSubsetBitsetCache which will be empty as the license enforcement
would prevent usage of DLS feature and it will not fail when accessing usage stats.
Closes#45147
This PR merges the `vectors-optimize-brute-force` feature branch, which makes
the following changes to how vector functions are computed:
* Precompute the L2 norm of each vector at indexing time. (#45390)
* Switch to ByteBuffer for vector encoding. (#45936)
* Decode vectors and while computing the vector function. (#46103)
* Use an array instead of a List for the query vector. (#46155)
* Precompute the normalized query vector when using cosine similarity. (#46190)
Co-authored-by: Mayya Sharipova <mayya.sharipova@elastic.co>
Besides a rename, this changes allows to processor to attach multiple
enrich docs to the document being ingested.
Also in order to control the maximum number of enrich docs to be
included in the document being ingested, the `max_matches` setting
is added to the enrich processor.
Relates #32789
As per #45852 comment we no longer need to log stack-traces in
SecurityTransportExceptionHandler and SecurityHttpExceptionHandler even
if trace logging is enabled.
(cherry picked from commit c99224a32d26db985053b7b36e2049036e438f97)
The test seems to have been failing due to a race condition between
stopping the task and refreshing the destination index. In particular,
we were going forward with refreshing the destination index even
though the task stopped in the meantime. This was fixed in
request.
Closes#43960
Backport of #46271
Previously, when the condition (1st argument) of the IIF function could
be evaluated (folded) to false, the `IfConditional` was eliminated which
caused `IndexOutOfBoundsException` to be thrown when `info()` and
`resolveType()` methods where called.
Fixes: #46268
(cherry picked from commit 9a885a3ac47bc8f52c07770d1d8d670ce0af1e59)
* [ML][Transforms] fixing stop on changes check bug
* Adding new method finishAndCheckState to cover race conditions in early terminations
* changing stopping conditions in `onStart`
* allow indexer to finish when exiting early
Fixes a problem where operations_behind would be one less than
expected per shard in a new index matched by the data frame
transform source pattern.
For example, if a data frame transform had a source of foo*
and a new index foo-new was created with 2 shards and 7 documents
indexed in it then operations_behind would be 5 prior to this
change.
The problem was that an empty index has a global checkpoint
number of -1 and the sequence number of the first document that
is indexed into an index is 0, not 1. This doesn't matter for
indices included in both the last and next checkpoints, as the
off-by-one errors cancelled, but for a new index it affected
the observed result.
Fix test issue to stabilise scoring through use of DFS search mode.
Randomised index-then-delete docs introduced by the test framework likely caused an imbalance in IDF scores across shards. Also made number of shards used in test a random number for added test coverage.
Closes#46174
Previously, if the DataType of all the WHEN conditions of a CASE
statement is NULL, then it was set to NULL even if the ELSE clause
has a non-NULL data type, e.g.:
```
CASE WHEN a = 1 THEN NULL
WHEN a = 5 THEN NULL
ELSE 'foo'
```
Fixes: #46032
(cherry picked from commit 8c1012efbbd3a300afd0dfb9b18250f15ea753f9)
Though we allow CCS within datafeeds, users could prevent nodes from accessing remote clusters. This can cause mysterious errors and difficult to troubleshoot.
This commit adds a check to verify that `cluster.remote.connect` is enabled on the current node when a datafeed is configured with a remote index pattern.
* [ML] Regression dependent variable must be numeric
This adds a validation that the dependent variable of a regression
analysis must be numeric.
* Address review comments and fix some problems
In addition to addressing the review comments, this
commit fixes a few issues I found during testing.
In particular:
- if there were mappings for required fields but they were
not included we were not reporting the error
- if explicitly included fields had unsupported types we were
not reporting the error
Unfortunately, I couldn't get those fixed without refactoring
the code in `ExtractedFieldsDetector`.
Today we might carry on a big merge uncommitted and therefore
occupy a significant amount of diskspace for quite a long time
if for instance indexing load goes down and we are not quickly
reaching the translog size threshold. This change will cause a
flush if we hit a significant merge (512MB by default) which
frees diskspace sooner.
If a CCR lease is disappeared while we are renewing it, then we will
issue asyncAddRetentionLease to add that lease. And if
asyncAddRetentionLease takes longer than retentionLeaseRenewInterval,
then we can issue another asyncAddRetentionLease request. One of
asyncAddRetentionLease requests will fail with
RetentionLeaseAlreadyExistsException, hence trip the assertion.
Closes#45192
This commit adds the `rollover_alias` setting required for ILM to work
correctly to the SLM history index template and adds assertions to the
SLM integration tests to ensure that it works correctly.
Currently, when using script_score functions like cosineSimilarity, the query
vector is treated as an array of doubles. Since the stored document vectors use
floats, it seems like the least surprising behavior for the query vectors to
also be float arrays.
In addition to improving consistency, this change may help with some
optimizations we have been considering around vector dot product.
This commit adds support for `boolean` fields in data frame
analytics (and currently both outlier detection and regression).
The analytics process expects `boolean` fields to be encoded as
integers with 0 or 1 value.
Prior to this commit the foreach action execution had a hard coded
limit to 100 iterations. This commit allows the max number of
iterations to be a configuration ('max_iterations') on the foreach
action. The default remains 100.
Adds a parameter `training_percent` to regression. The default
value is `100`. When the parameter is set to a value less than `100`,
from the rows that can be used for training (ie. those that have a
value for the dependent variable) we randomly choose whether to actually
use for training. This enables splitting the data into a training set and
the rest, usually called testing, validation or holdout set, which allows
for validating the model on data that have not been used for training.
Technically, the analytics process considers as training the data that
have a value for the dependent variable. Thus, when we decide a training
row is not going to be used for training, we simply clear the row's
dependent variable.
The existing privilege model for API keys with privileges like
`manage_api_key`, `manage_security` etc. are too permissive and
we would want finer-grained control over the cluster privileges
for API keys. Previously APIs created would also need these
privileges to get its own information.
This commit adds support for `manage_own_api_key` cluster privilege
which only allows api key cluster actions on API keys owned by the
currently authenticated user. Also adds support for retrieval of
the API key self-information when authenticating via API key
without the need for the additional API key privileges.
To support this privilege, we are introducing additional
authentication context along with the request context such that
it can be used to authorize cluster actions based on the current
user authentication.
The API key get and invalidate APIs introduce an `owner` flag
that can be set to true if the API key request (Get or Invalidate)
is for the API keys owned by the currently authenticated user only.
In that case, `realm` and `username` cannot be set as they are
assumed to be the currently authenticated ones.
The changes cover HLRC changes, documentation for the API changes.
Closes#40031
This commit introduces PKI realm delegation. This feature
supports the PKI authentication feature in Kibana.
In essence, this creates a new API endpoint which Kibana must
call to authenticate clients that use certificates in their TLS
connection to Kibana. The API call passes to Elasticsearch the client's
certificate chain. The response contains an access token to be further
used to authenticate as the client. The client's certificates are validated
by the PKI realms that have been explicitly configured to permit
certificates from the proxy (Kibana). The user calling the delegation
API must have the delegate_pki privilege.
Closes#34396
This check was introduced in #41392 but had the unwanted side-effect
that the keystore settings in such blocks would note be added in the
node's keystore. Given that we have a mid-term plan for FIPS testing
that would made such checks unnecessary, and that the conditional
in these two cases is not really that important, this change removes
this conditional logic so that full-cluster-restart and rolling
upgrade tests will run with PEM files for key/certificate material
no matter if we're in a FIPS JVM or not.
Resolves: #45475
This adds a pipeline aggregation that calculates the cumulative
cardinality of a field. It does this by iteratively merging in the
HLL sketch from consecutive buckets and emitting the cardinality up
to that point.
This is useful for things like finding the total "new" users that have
visited a website (as opposed to "repeat" visitors).
This is a Basic+ aggregation and adds a new Data Science plugin
to house it and future advanced analytics/data science aggregations.
The native process requires that there be a non-zero number of rows to analyze. If the flag --rows 0 is passed to the executable, it throws and does not start.
When building the configuration for the process we should not start the native process if there are no rows.
Adding some logging to indicate what is occurring.
* Watcher add email warning if CSV attachment contains formulas (#44460)
This commit introduces a Warning message to the emails generated by
Watcher's reporting action. This change complements Kibana's CSV
formula notifications (see elastic/kibana#37930).
This is implemented by reading a header (kbn-csv-contains-formulas)
provided by Kibana to notify to attach the Warning to the email.
The wording of the warning is borrowed from Kibana's UI and may
be overridden by a dynamic setting
xpack.notification.reporting.warning.kbn-csv-contains-formulas.text.
This warning is enabled by default, but may be disabled via a
dynamic setting xpack.notification.reporting.warning.enabled.
As of #43939 Watcher tests now correctly block until all Watch executions
kicked off by that test are finished. Prior we allowed tests to finish with
outstanding watch executions. It was known that this would increase the
time needed to finish a test. However, running the tests on CI can be slow
and on at least 1 occasion it took 60s to actually finish.
This PR simply increases the max allowable timeout for Watcher tests
to clean up after themselves.
Today if non-TLS record is received on TLS port generic exception will
be logged with the stack-trace.
SSLExceptionHelper.isNotSslRecordException method does not work because
it's assuming that NonSslRecordException would be top-level.
This commit addresses the issue and the log would be more concise.
(cherry picked from commit 6b83527bf0c23d4d5b97fab7f290c43432945d4f)
This commit allows the Transport Actions for the SSO realms to
indicate the realm that should be used to authenticate the
constructed AuthenticationToken. This is useful in the case that
many authentication realms of the same type have been configured
and where the caller of the API(Kibana or a custom web app) already
know which realm should be used so there is no need to iterate all
the realms of the same type.
The realm parameter is added in the relevant REST APIs as optional
so as not to introduce any breaking change.
When a policy is deleted, the enrich indices that are backing the policy
alias should also be deleted. This commit does that work and cleans up
the transport action a bit so that the lock release is easier to see, as
well as to ensure that any action carried out, regardless of exception,
unlocks the policy.
Previously, the stats API reports a progress percentage
for DF analytics tasks that are running and are in the
`reindexing` or `analyzing` state.
This means that when the task is `stopped` there is no progress
reported. Thus, one cannot distinguish between a task that never
run to one that completed.
In addition, there are blind spots in the progress reporting.
In particular, we do not account for when data is loaded into the
process. We also do not account for when results are written.
This commit addresses the above issues. It changes progress
to being a list of objects, each one describing the phase
and its progress as a percentage. We currently have 4 phases:
reindexing, loading_data, analyzing, writing_results.
When the task stops, progress is persisted as a document in the
state index. The stats API now reports progress from in-memory
if the task is running, or returns the persisted document
(if there is one).
This commit changes the enrich processor factory to read the required
configuration from the current enrich index (from meta mapping field)
in order to create the processor.
Before this change the required config was read from the enrich policy
in the cluster state. Enrich policies are going to be stored in an
index (instead of the cluster state). In a processor factory there isn't
a way to load something from an index, so with this change we read
the required config / info from the enrich index (which is derived
from the enrich policy), which then allows us to move enrich policies
to an index.
With this change it is required to execute a policy before creating a
pipeline. Otherwise there is no enrich index and then there is no way
to validate that a policy exist or retrieve its type and match field.
Relates to #32789
A policy type controls how the enrich index is created and
the query executed against the match field. Currently there
is a single policy type (`exact_match`). In the near future
more policy types will be added and different policy may have
different configuration options.
For this reason type should be a json object instead of a string field:
```
{
"exact_match": {
...
}
}
```
instead of:
```
{
"type": "exact_match",
...
}
```
This will make streaming parsing of enrich policies easier as in the
new format, the parsing code can know ahead what configuration fields
to expect. In the latter format that is not possible if the type field
appears not as the first field.
Relates to #32789
The security indices were being created without specifying the
refresh interval, which means it would inherit a value from any
templates that exists.
However, certain security functionality depends on being able to
wait_for refresh, and causes errors (e.g. in Kibana) if that time
exceeds 30s.
This commit changes the security indices configuration to always be
created with a 1s refresh interval. This prevents any templates from
inadvertantly interfering with the proper functioning of security.
It is possible for an administrator to explicitly change the refresh
interval after the indices have been created.
Backport of: #45434
This change adds a new SSL context
xpack.notification.email.ssl.*
that supports the standard SSL configuration settings (truststore,
verification_mode, etc). This SSL context is used when configuring
outbound SMTP properties for watcher email notifications.
Backport of: #45272
Since #45136, we use soft-deletes instead of translog in peer recovery.
There's no need to retain extra translog to increase a chance of
operation-based recoveries. This commit ignores the translog retention
policy if soft-deletes is enabled so we can discard translog more
quickly.
Backport of #45473
Relates #45136
* [ML] Adding data frame analytics stats to _usage API (#45820)
* [ML] Adding data frame analytics stats to _usage API
* making the size of analytics stats 10k
* adjusting backport
Adds index versioning for the internal data frame transform index. Allows for new indices to be created and referenced, `GET` requests now query over the index pattern and takes the latest doc (based on INDEX name).
When Watcher is stopped and there are still outstanding watches running
Watcher will report it self as stopped. In normal cases, this is not problematic.
However, for integration tests Watcher is started and stopped between
each test to help ensure a clean slate for each test. The tests are blocking
only on the stopped state and make an implicit assumption that all watches are
finished if the Watcher is stopped. This is an incorrect assumption since
Stopped really means, "I will not accept any more watches". This can lead to
un-predictable behavior in the tests such as message : "Watch is already queued
in thread pool" and state: "not_executed_already_queued".
This can also change the .watcher-history if watches linger between tests.
This commit changes the semantics of a manual stopping watcher to now mean:
"I will not accept any more watches AND all running watches are complete".
There is now an intermediary step "Stopping" and callback to allow transition
to a "Stopped" state when all Watches have completed.
Additionally since this impacts how long the tests will block waiting for a
"Stopped" state, the timeout has been increased.
Related: #42409
In internal test clusters tests we check that wiping all indices was acknowledged
but in REST tests we didn't.
This aligns the behavior in both kinds of tests.
Relates #45605 which might be caused by unacked deletes that were just slow.
Enrich processor configuration changes:
* Renamed `enrich_key` option to `field` option.
* Replaced `set_from` and `targets` options with `target_field`.
The `target_field` option behaves different to how `set_from` and
`targets` worked. The `target_field` is the field that will contain
the looked up document.
Relates to #32789
After the PR #45676 onFailure is now called before the indexer state has transitioned out of indexing.
To fix these tests, I added a new check to make sure that we don't mark it as failed until AFTER doSaveState is called with a STARTED indexer.
Following our own guidelines, SLM should use rollover instead of purely
time-based indices to keep shard counts low. This commit implements lazy
index creation for SLM's history indices, indexing via an alias, and
rollover in the built-in ILM policy.
Most of our CLI tools use the Terminal class, which previously did not provide methods for writing to standard output. When all output goes to standard out, there are two basic problems. First, errors and warnings are "swallowed" in pipelines, making it hard for a user to know when something's gone wrong. Second, errors and warnings are intermingled with legitimate output, making it difficult to pass the results of interactive scripts to other tools.
This commit adds a second set of print commands to Terminal for printing to standard error, with errorPrint corresponding to print and errorPrintln corresponding to println. This leaves it to developers to decide which output should go where. It also adjusts existing commands to send errors and warnings to stderr.
Usage is printed to standard output when it's correctly requested (e.g., bin/elasticsearch-keystore --help) but goes to standard error when a command is invoked incorrectly (e.g. bin/elasticsearch-keystore list-with-a-typo | sort).
Regression analysis support missing fields. Even more, it is expected
that the dependent variable has missing fields to the part of the
data frame that is not for training.
This commit allows to declare that an analysis supports missing values.
For such analysis, rows with missing values are not skipped. Instead,
they are written as normal with empty strings used for the missing values.
This also contains a fix to the integration test.
Closes#45425
* [ML] better handle empty results when evaluating regression
* adding new failure test to ml_security black list
* fixing equality check for regression results
* Executing SLM policies on the snapshot thread will block until a snapshot finishes if the pool is completely busy executing that snapshot
* Fixes#45594
The get and list APIs are a single API in this commit. Whether
requesting one named policy or all policies, a list of policies is
returened. The list API code has all been removed and the GET api is
what remains, which contains much of the list response code.
The setting index.soft_deletes.retention.operations is no longer needed
nor recommended in CCR. We, therefore, should hint users about the
retention leases period setting instead when operations are no longer
available for replicating.
We cannot know how long the analysis will take to complete thus we should not have
a timeout. Note that if the process crashes, the result processor will pick the
exception due to the stream closing.
Closes#45723
* [ML][Data frame] fixing failure state transitions and race condition (#45627)
There is a small window for a race condition while we are flagging a task as failed.
Here are the steps where the race condition occurs:
1. A failure occurs
2. Before `AsyncTwoPhaseIndexer` calls the `onFailure` handler it does the following:
a. `finishAndSetState()` which sets the IndexerState to STARTED
b. `doSaveState(...)` which attempts to save the current state of the indexer
3. Another trigger is fired BEFORE `onFailure` can fire, but AFTER `finishAndSetState()` occurs.
The trick here is that we will eventually set the indexer to failed, but possibly not before another trigger had the opportunity to fire. This could obviously cause some weird state interactions. To combat this, I have put in some predicates to verify the state before taking actions. This is so if state is indeed marked failed, the "second trigger" stops ASAP.
Additionally, I move the task state checks INTO the `start` and `stop` methods, which will now require a `force` parameter. `start`, `stop`, `trigger` and `markAsFailed` are all `synchronized`. This should gives us some guarantees that one will not switch states out from underneath another.
I also flag the task as `failed` BEFORE we successfully write it to cluster state, this is to allow us to make the task fail more quickly. But, this does add the behavior where the task is "failed" but the cluster state does not indicate as much. Adding the checks in `start` and `stop` will handle this "real state vs cluster state" race condition. This has always been a problem for `_stop` as it is not a master node action and doesn’t always have the latest cluster state.
closes#45609
Relates to #45562
* [ML][Data Frame] moves failure state transition for MT safety (#45676)
* [ML][Data Frame] moves failure state transition for MT safety
* removing unused imports
* Search enhancement: pinned queries (#44345)
Search enhancement: - new query type allows selected documents to be promoted above any "organic” search results.
This is the first feature in a new module `search-business-rules` which will house licensed (non OSS) logic for rewriting queries according to business rules.
The PinnedQueryBuilder class offers a new `pinned` query in the DSL that takes an array of promoted IDs and an “organic” query and ensures the documents with the promoted IDs rank higher than the organic matches.
Closes#44074
Encapsulate the serialization/deserialization of SQL client classes.
Make configuration specific parameters (such as ZoneId) generic just
like the version and remove the need for consumer classes to manage them
individually.
This is not only consistent but also provides significant savings in the
cursor.
Fix#40216
(cherry picked from commit 5c844798045d7baa0d932289d2e3d1607ba6a9a4)
Improve the initialization and state passing of TextFormatter in CLI
and TEXT mode by leveraging the Page listener hook. Additionally
simplify the code inside RestSqlQueryAction.
(cherry picked from commit a56db2fa119cf9e8748723e19f1fc9f6a8afe5fc)
Improve encapsulation of pagination of rowsets by breaking the cycle
between cursor and associated rowset implementation, all logic now
residing inside each cursor implementation.
(cherry picked from commit be8fe0a0ce562fe732fae12a0b236b5731e4638c)
Adjusts the cluster cleanup routine in ESRestTestCase to clean up SLM
test cases, and optionally wait for all snapshots to be deleted.
Waiting for all snapshots to be deleted, rather than failing if any are
in progress, is necessary for tests which use SLM policies because SLM
policies may be in the process of executing when the test ends.
Changes the order of parameters in Geometries from lat, lon to lon, lat
and moves all Geometry classes are moved to the
org.elasticsearch.geomtery package.
Backport of #45332Closes#45048
* Update the REST API specification
This patch updates the REST API spefication in JSON files to better encode deprecated entities,
to improve specification of URL paths, and to open up the schema for future extensions.
Notably, it changes the `paths` from a list of strings to a list of objects, where each
particular object encodes all the information for this particular path: the `parts` and the `methods`.
Among the benefits of this approach is eg. encoding the difference between using the `PUT` and `POST`
methods in the Index API, to either use a specific document ID, or let Elasticsearch generate one.
Also `documentation` becomes an object that supports an `url` and also a `description` which is a
new field.
* Adapt YAML runner to new REST API specification format
The logic for choosing the path to use when running tests has been
simplified, as a consequence of the path parts being listed under each
path in the spec. The special case for create and index has been removed.
Also the parsing code has been hardened so that errors are thrown earlier
when the structure of the spec differs from what expected, and their
error messages should be more helpful.
This commit adds a lock to the delete policy, in the same way that the
locking is done for policy execution. It also creates a test to exercise
the delete transport action, and modifies an existing test to provide a
common set of functions for saving and deleting policies.
The delete policy had a subtle bug in that it would still delete the
policy if pipelines were accessing it, after giving the client back an
error. This commit fixes that and ensures it does not happen by adding
verification in the test.
* Introduce Spatial Plugin (#44389)
Introduce a skeleton Spatial plugin that holds new licensed features coming to
Geo/Spatial land!
* [GEO] Refactor DeprecatedParameters in AbstractGeometryFieldMapper (#44923)
Refactor DeprecatedParameters specific to legacy geo_shape out of
AbstractGeometryFieldMapper.TypeParser#parse.
* [SPATIAL] New ShapeFieldMapper for indexing cartesian geometries (#44980)
Add a new ShapeFieldMapper to the xpack spatial module for
indexing arbitrary cartesian geometries using a new field type called shape.
The indexing approach leverages lucene's new XYShape field type which is
backed by BKD in the same manner as LatLonShape but without the WGS84
latitude longitude restrictions. The new field mapper builds on and
extends the refactoring effort in AbstractGeometryFieldMapper and accepts
shapes in either GeoJSON or WKT format (both of which support non geospatial
geometries).
Tests are provided in the ShapeFieldMapperTest class in the same manner
as GeoShapeFieldMapperTests and LegacyGeoShapeFieldMapperTests.
Documentation for how to use the new field type and what parameters are
accepted is included. The QueryBuilder for searching indexed shapes is
provided in a separate commit.
* [SPATIAL] New ShapeQueryBuilder for querying indexed cartesian geometry (#45108)
Add a new ShapeQueryBuilder to the xpack spatial module for
querying arbitrary Cartesian geometries indexed using the new shape field
type.
The query builder extends AbstractGeometryQueryBuilder and leverages the
ShapeQueryProcessor added in the previous field mapper commit.
Tests are provided in ShapeQueryTests in the same manner as
GeoShapeQueryTests and docs are updated to explain how the query works.
If a pipeline that refrences the policy exists, we should not allow the
policy to be deleted. The user will need to remove the processor from
the pipeline before deleting the policy. This commit adds a check to
ensure that the policy cannot be deleted if it is referenced by any
pipeline in the system.
* Add format parameter to the range queries built for CURRENT_* functions
used in comparison conditions
* Use range queries for date fields equality/non-equality as well.
(cherry picked from commit c1e81e90f937ee5a002524d632bfce74d76962f9)
The policy name is used to generate the enrich index name.
For this reason, a policy name should be validated in the same way
as index names.
Relates to #32789
* Reenable Integ Tests in native-multi-node-tests
* The tests broken here were likely fixed by #45463 => let's reenable them and see if things run fine again
* Relates #45405, #45455
The http client could end up creating URLs, that did not resemble the
original one, when encoding. This fixes a couple of corner cases, where
too much or too few slashes were added to an URI.
Closes#44970
The current implementations make it difficult for
adding new privileges (example: a cluster privilege which is
more than cluster action-based and not exposed to the security
administrator). On the high level, we would like our cluster privilege
either:
- a named cluster privilege
This corresponds to `cluster` field from the role descriptor
- or a configurable cluster privilege
This corresponds to the `global` field from the role-descriptor and
allows a security administrator to configure them.
Some of the responsibilities like the merging of action based cluster privileges
are now pushed at cluster permission level. How to implement the predicate
(using Automaton) is being now enforced by cluster permission.
`ClusterPermission` helps in enforcing the cluster level access either by
performing checks against cluster action and optionally against a request.
It is a collection of one or more permission checks where if any of the checks
allow access then the permission allows access to a cluster action.
Implementations of cluster privilege must be able to provide information
regarding the predicates to the cluster permission so that can be enforced.
This is enforced by making implementations of cluster privilege aware of
cluster permission builder and provide a way to specify how the permission is
to be built for a given privilege.
This commit renames `ConditionalClusterPrivilege` to `ConfigurableClusterPrivilege`.
`ConfigurableClusterPrivilege` is a renderable cluster privilege exposed
as a `global` field in role descriptor.
Other than this there is a requirement where we would want to know if a cluster
permission is implied by another cluster-permission (`has-privileges`).
This is helpful in addressing queries related to privileges for a user.
This is not just simply checking of cluster permissions since we do not
have access to runtime information (like request object).
This refactoring does not try to address those scenarios.
Relates #44048
The vagrant based tests currently reside in a single project, creating
dozens of tasks to manage starting and stopping the vagrant VM along
with running java and bats tests within each image. This all-in-one
pattern makes parallelizing packaging tests difficult.
This commit rewrites the vagrant testing infrastructure to be
independent of the actual test runners, thus allowing each platform to
be handled in a separate subproject. Additionally, the java and bats
tests are changed to be run through a "destructive" gradle task, which
is run inside the VM. The combination of these will allow
parallelization both locally (through running several VMs at once) as
well as running the destructive tasks in CI machines dedicated to each
platform (thus removing the need for vagrant in CI).
This commit adds a first draft of a regression analysis
to data frame analytics. There is high probability that
the exact syntax might change.
This commit adds the new analysis type and its parameters as
well as appropriate validation. It also modifies the extractor
and the fields detector to be able to handle categorical fields
as regression analysis supports them.
In the case that source and target are the same in `enrich_values` then
a string array can be specified.
For example instead of this:
```
PUT /_ingest/pipeline/my-pipeline
{
"processors": [
{
"enrich" : {
"policy_name": "my-policy",
"enrich_values": [
{
"source": "first_name",
"target": "first_name"
},
{
"source": "last_name",
"target": "last_name"
},
{
"source": "address",
"target": "address"
},
{
"source": "city",
"target": "city"
},
{
"source": "state",
"target": "state"
},
{
"source": "zip",
"target": "zip"
}
]
}
}
]
}
```
This more compact format can be specified:
```
PUT /_ingest/pipeline/my-pipeline
{
"processors": [
{
"enrich" : {
"policy_name": "my-policy",
"targets": [
"first_name",
"last_name",
"address",
"city",
"state",
"zip"
]
}
}
]
}
```
And the `enrich_values` key has been renamed to `set_from`.
Relates to #32789
* Restrict which tasks can use testclusters
This PR fixes a problem between the interaction of test-clusters and
build cache.
Before this any task could have used a cluster without tracking it as
input.
With this change a new interface is introduced to track the tasks that
can use clusters and we do consider the cluster as input for all of
them.
Currently the msearch api is used to execute buffered search requests;
however the msearch api doesn't deal with search requests in an intelligent way.
It basically executes each search separately in a concurrent manner.
This api reuses the msearch request and response classes and executes
the searches as one request in the node holding the enrich index shard.
Things like engine.searcher and query shard context are only created once.
Also there are less layers than executing a regular msearch request. This
results in an interesting speedup.
Without this change, in a single node cluster, enriching documents
with a bulk size of 5000 items, the ingest time in each bulk response
varied from 174ms to 822ms. With this change the ingest time in each
bulk response varied from 54ms to 109ms.
I think we should add a change like this based on this improvement in ingest time.
However I do wonder if instead of doing this change, we should improve
the msearch api to execute more efficiently. That would be more complicated
then this change, because in this change the custom api can only search
enrich index shards and these are special because they always have a single
primary shard. If msearch api is to be improved then that should work for
any search request to any indices. Making the same optimization for
indices with more than 1 primary shard requires much more work.
The current change is isolated in the enrich plugin and LOC / complexity
is small. So this good enough for now.
* Name each inner_hits section of nested queries differently and extract and combine the multiple values it generates into a single list.
This also introduces a limitation (its origin it's with Elasticsearch
though) on the sorting capabilities when the sorting is based on the
nested fields filtered: only one of the conditions applied to nested
documents will be used in the nested sorting.
(cherry picked from commit cfc5cf68f6e83b07bb9006986d0903d6be418ec6)
This commit replaces task_state and indexer_state in the
data frame _stats output with a single top level state
that combines the two. It is defined as:
- failed if what's currently reported as task_state is failed
- stopped if there is no persistent task
- Otherwise what's currently reported as indexer_state
Backport of #45276
When using the implicit flow in OpenID Connect, the
op.token_endpoint_url should not be mandatory as there is no need
to contact the token endpoint of the OP.
* [ML][Data Frame] Add update transform api endpoint (#45154)
This adds the ability to `_update` stored data frame transforms. All mutable fields are applied when the next checkpoint starts. The exception being `description`.
This PR contains all that is necessary for this addition:
* HLRC
* Docs
* Server side
This adds support for `geo_bounds` aggregation inside the `pivot.aggregations` configuration.
The two points returned from the `geo_bounds` aggregation are transformed into `geo_shape` whose types are dynamic given the point's similarity.
* `point` if the two points are identical
* `linestring` if the two points share either a latitude or longitude
* `polygon` if the two points are completely different
The automatically deduced mapping for the resulting field is a `geo_shape`.
We currently use the unboundid ldap SDK, which is triply licensed under
GPL-2.0, LGPL-2.1, and the "UnboundID LDAP SDK Free Use License". We currently
identify the license as the latter, but LGPL-2.1 is the one we should be using
per our policy.
The PutJob API accidentally used an "expert" API of CreateIndexRequest.
That API is semi-lenient to syntax; a type could be omitted and the
request would work as expected. But if a type was omitted it would
not merge with templates correctly, leading to index creation that
only has the template and not the requested mappings in the request.
This commit refactors the PutJob API to:
- Include the type name
- Use a less "expert" API in an attempt to future proof against errors
- Uses an XContentBuilder instead of string replacing, removes json template
This commit applies a normalization process to environment paths, both
in how they are stored internally, also their settings values. This
normalization is done via two means:
- we make the paths absolute
- we remove redundant name elements from the path (what Java calls
"normalization")
This change ensures that when we compare and refer to these paths within
the system, we are using a common ground. For example, prior to the
change if the data path was relative, we would not compare it correctly
to paths from disk usage. This is because the paths in disk usage were
being made absolute.
Uses JDK 11's per-socket configuration of TCP keepalive (supported on Linux and Mac), see
https://bugs.openjdk.java.net/browse/JDK-8194298, and exposes these as transport settings.
By default, these options are disabled for now (i.e. fall-back to OS behavior), but we would like
to explore whether we can enable them by default, in particular to force keepalive configurations
that are better tuned for running ES.
introduces an abstraction for how checkpointing and synchronization works, covering
- retrieval of checkpoints
- check for updates
- retrieving stats information
Currently in the transport-nio work we connect and bind channels on the
a thread before the channel is registered with a selector. Additionally,
it is at this point that we set all the socket options. This commit
moves these operations onto the event-loop after the channel has been
registered with a selector. It attempts to set the socket options for a
non-server channel at registration time. If that fails, it will attempt
to set the options after the channel is connected. This should fix
#41071.
In the FIPS JVM the JVM default locale seems to leak into places
where it should be overridden. This change skips assertions
in TimestampFormatFinderTests.testGuessIsDayFirstFromLocale
that may be impacted.
Fixes#45140
Today we recover a replica by copying operations from the primary's translog.
However we also retain some historical operations in the index itself, as long
as soft-deletes are enabled. This commit adjusts peer recovery to use the
operations in the index for recovery rather than those in the translog, and
ensures that the replication group retains enough history for use in peer
recovery by means of retention leases.
Reverts #38904 and #42211
Relates #41536
Backport of #45136 to 7.x.
Reloading of synonym_graph filter doesn't work currently because the search time
AnalysisMode doesn't get propagated to the TokenFilterFactory emitted by the
graph filters getChainAwareTokenFilterFactory() method. This change fixes that.
Closes#45127
When doing a fieldwise Levenshtein distance comparison
between CSV rows, this change ignores all fields that
have long values, not just the longest field.
This approach works better for CSV formats that have
multiple freeform text fields rather than just a single
"message" field.
Fixes#45047
This change improves the exception messages that are thrown when the
system cannot read TLS resources such as keystores, truststores,
certificates, keys or certificate-chains (CAs).
This change specifically handles:
- Files that do not exist
- Files that cannot be read due to file-system permissions
- Files that cannot be read due to the ES security-manager
Backport of: #44787
There are no realms that can be configured exclusively with secure
settings. Every realm that supports secure settings also requires one
or more non-secure settings.
However, sometimes a node will be configured with entries in the
keystore for which there is nothing in elasticsearch.yml - this may be
because the realm we removed from the yml, but not deleted from the
keystore, or it could be because there was a typo in the realm name
which has accidentially orphaned the keystore entry.
In these cases the realm building would fail, but the error would not
always be clear or point to the root cause (orphaned keystore
entries). RealmSettings would act as though the realm existed, but
then fail because an incorrect combination of settings was provided.
This change causes realm building to fail early, with an explicit
message about incorrect keystore entries.
Backport of: #44471
When we create API key we check if the API key with the name
already exists. It searches with scroll enabled and this causes
the request to fail when creating large number of API keys in
parallel as it hits the number of open scroll limit (default 500).
We do not need the search context to be created so this commit
removes the scroll parameter from the search request for duplicate
API key.
If one tries to start a DF analytics job that has already run,
the result will be that the task will fail after reindexing the
dest index from the source index. The results of the prior run
will be gone and the task state is not properly set to failed
with the failure reason.
This commit improves the behavior in this scenario. First, we
set the task state to `failed` in a set of failures that were
missed. Second, a validation is added that if the destination
index exists, it must be empty.
We keep adding the current primary term to operations for which we do not assign a sequence
number. This does not make sense anymore as all operations which we care about have
sequence numbers now. The goal of this commit is to clean things up in InternalEngine and
reduce the complexity.
* We shouldn't be recreating wrapped REST handlers over and over for every request. We only use this hook in x-pack and the wrapper there does not have any per request state.
This is inefficient and could lead to some very unexpected memory behavior
=> I made the logic create the wrapper on handler registration and adjusted the x-pack wrapper implementation to correctly forward the circuit breaker and content stream flags
The Get Users API also returns users form the restricted realm or built-in users,
as we call them in our docs. One can also change the passwords of built-in
users with the Change Password API
A mismatched configuration between the IdP and SP will often result in
SAML authentication attempts failing because the audience condition is
not met (because the IdP and SP disagree about the correct form of the
SP's Entity ID).
Previously the error message in this case did not provide sufficient
information to resolve the issue because the IdP's expected audience
would be truncated if it exceeeded 32 characters. Since the error did
not provide both IDs in full, it was not possible to determine the
correct fix (in detail) based on the error alone.
This change expands the message that is included in the thrown
exception, and also adds additional logging of every failed audience
condition, with diagnostics of the match failure.
Backport of: #44334
* Create S3 Third Party Test Task that Covers the S3 CLI Tool
* Adjust snapshot cli test tool tests to work with real S3
* Build adjustment
* Clean up repo path before testing
* Dedup the logic for asserting path contents by using the correct utility method here that somehow became unused
Today closing a `ClusterNode` in an `AbstractCoordinatorTestCase` uses
`onNode()` so has no effect if the node is not in the current list of nodes.
It also discards the `Runnable` it creates without having run it, so has no
effect anyway.
This commit makes these tests much stricter about properly closing the nodes
started during `Coordinator` tests, by tracking the persisted states that are
opened, and adds an assertion to catch the trappy requirement that the closing
node still belongs to the cluster.
The existing equals check was broken, and would always be false.
The correct behaviour is to return "Collections.emptyList()" whenever
the the active(licensed)-realms equals the configured-realms.
Backport of: #44399
* Rename indexlifecycle to ilm and snapshotlifecycle to slm (#44917)
As a followup to #44725 and #44608, which renamed the packages within
the x-pack project, this renames the packages within the core x-pack
project. It also renames 'snapshotlifecycle' within the HLRC to slm.
* Fix one more import
In case closing the process throws an exception we should be catching
it no matter its type. The process may have terminated because of a
fatal error in which case closing the process will throw a server
error, not an `IOException`. If this happens we fail to mark the
persistent task as failed and the task gets in limbo.
As data frame rows with missing values for analyzed fields are skipped,
we can be more efficient by including a query that only picks documents
that have values for all analyzed fields. Besides improving the number
of documents we go through, we also provide a more accurate measurement
of how many rows we need which reduces the memory requirements.
This also adds an integration test that runs outlier detection on data
with missing fields.
TaskListener accepts today Throwable in its onFailure method. Though
looking at where it is called (TransportAction), it can never be
notified of a Throwable.
This commit changes the signature of TaskListener#onFailure so that it
accepts an `Exception` rather than a `Throwable` as second argument.
In order to make it easier to interpret the output of the ILM Explain
API, this commit adds two request parameters to that API:
- `only_managed`, which causes the response to only contain indices
which have `index.lifecycle.name` set
- `only_errors`, which causes the response to contain only indices in an
ILM error state
"Error state" is defined as either being in the `ERROR` step or having
`index.lifecycle.name` set to a policy that does not exist.
Today the processors setting is permitted to be set to more than the
number of processors available to the JVM. The processors setting
directly sizes the number of threads in the various thread pools, with
most of these sizes being a linear function in the number of
processors. It doesn't make any sense to set processors very high as the
overhead from context switching amongst all the threads will overwhelm,
and changing the setting does not control how many physical CPU
resources there are on which to schedule the additional threads. We have
to draw a line somewhere and this commit deprecates setting processors
to more than the number of available processors. This is the right place
to draw the line given the linear growth as a function of processors in
most of the thread pools, and that some are capped at the number of
available processors already.
Since 7.3, it's possible to explicitly configure the SAML realm to
be used in Kibana's configuration. This in turn, eliminates the need
of properly setting `xpack.security.public.*` settings in Kibana
and largely simplifies relevant documentation.
This also changes `xpack.security.authProviders` to
`xpack.security.authc.providers` as the former was deprecated in
favor of the latter in 7.3 in Kibana
This is a followup to #44350. The indexer stats used to
be persisted standalone, but now are only persisted as
part of a state-and-stats document. During the review
of #44350 it was decided that we'll stick with this
design, so there will never be a need for an indexer
stats object to store its transform ID as it is stored
on the enclosing document. This PR removes the indexer
stats document ID.
Backport of #44768
The problem is that RemoteClusterConnection closes the connection manager asynchronously, which races with the threadpool being shutdown at the end of the test.
Closes#44339Closes#44610
Deleting a follower index does not delete its ShardFollowTasks, potentially
leaving many persistent tasks in the cluster that cannot be allocated on
nodes and unnecessary fill the logs. This commit adds a cluster state listener
(ShardFollowTaskCleaner) that completes (with a failure) any persistent task
that refers to a non existent follower index.
I think that this bug has been introduced by #34404: before this change the
task would have been completed as failed and removed from the cluster state.
Backport of #44702 and #44801 on 7.x
* Switch from using docvalue_fields to extracting values from _source
where applicable. Doing this means parsing the _source and handling the
numbers parsing just like Elasticsearch is doing it when it's indexing
a document.
* This also introduces a minor limitation: aliases type of fields that
are NOT part of a tree of sub-fields will not be able to be retrieved
anymore. field_caps API doesn't shed any light into a field being an
alias or not and at _source parsing time there is no way to know if a
root field is an alias or not. Fields of the type "a.b.c.alias" can be
extracted from docvalue_fields, only if the field they point to can be
extracted from docvalue_fields. Also, not all fields in a hierarchy of
fields can be evaluated to being an alias.
(cherry picked from commit 8bf8a055e38f00df5f49c8d97f632f69d6e00c2c)
Use InspectionHelper classes to decide if the aggregations should return null (in case there is no value) or the value itself.
(cherry picked from commit dafd7b039b0da072750e8f57e7572d24f7aad44a)
* Only emit deprecation warning if there was actual change of a datafeed's job_id.
* Add @Deprecated annotation to DatafeedUpdate.Builder#setJobId method
Adds a global soft limit on the number of concurrently executing enrich policies.
Since an enrich policy is run on the generic thread pool, this is meant to limit
policy runs separately from the generic thread pool capacity.
This change adjusts the data frame transforms stats
endpoint to return a structure that is easier to
understand.
This is a breaking change for clients of the data frame
transforms stats endpoint, but the feature is in beta so
stability is not guaranteed.
Backport of #44350
This commit renames the ILM package from indexlifecycle to ilm. We have
all come to know index lifecycle management as ILM, the APIs and
settings use ilm, and it would be nice of the package did too. This
commit makes that change.
This commit renames the SLM package from snapshotlifecycle to slm. We
have all come to know index lifecycle management as ILM, the APIs and
settings use ilm, and it would be nice of the package did too. For SLM,
let's use slm for all of these including the package name from the
beginning.
This PR adds a background maintenance task that is scheduled on the master node only.
The deletion of an index is based on if it is not linked to a policy or if the enrich alias is not
currently pointing at it. Synchronization has been added to make sure that no policy
executions are running at the time of cleanup, and if any executions do occur, the marking
process delays cleanup until next run.
We often start testing with early access versions of new Java
versions and this have caused minor issues in our tests
(i.e. #43141) because the version string that the JVM reports
cannot be parsed as it ends with the string -ea.
This commit changes how we parse and compare Java versions to
allow correct parsing and comparison of the output of java.version
system property that might include an additional alphanumeric
part after the version numbers
(see [JEP 223[(https://openjdk.java.net/jeps/223)). In short it
handles a version number part, like before, but additionally a
PRE part that matches ([a-zA-Z0-9]+).
It also changes a number of tests that would attempt to parse
java.specification.version in order to get the full version
of Java. java.specification.version only contains the major
version and is thus inappropriate when trying to compare against
a version that might contain a minor, patch or an early access
part. We know parse java.version that can be consistently
parsed.
Resolves#43141
Since #44344 we use IndicesOptions.LENIENT_EXPAND_OPEN
when deciding which indices to include in checkpoint
calculation. This change uses the same option when
deciding which indices to search for data and which
indices to get mappings from, otherwise there is a
potential mismatch between the checkpoint details and
what is searched elsewhere.
* Mute failing test
tracked in #44552
* mute EvilSecurityTests
tracking in #44558
* Fix line endings in ESJsonLayoutTests
* Mute failing ForecastIT test on windows
Tracking in #44609
* mute BasicRenormalizationIT.testDefaultRenormalization
tracked in #44613
* fix mute testDefaultRenormalization
* Increase busyWait timeout windows is slow
* Mute failure unconfigured node name
* mute x-pack internal cluster test windows
tracking #44610
* Mute JvmErgonomicsTests on windows
Tracking #44669
* mute SharedClusterSnapshotRestoreIT testParallelRestoreOperationsFromSingleSnapshot
Tracking #44671
* Mute NodeTests on Windows
Tracking #44256
This adds a new dynamic cluster setting `xpack.data_frame.num_transform_failure_retries`.
This setting indicates how many times non-critical failures should be retried before a data frame transform is marked as failed and should stop executing. At the time of this commit; Min: 0, Max: 100, Default: 10
NamedAnalyzer should return the same AnalysisMode than any custom analyzer it
wraps, otherwise AnalysisMode.ALL. This used to be only CustomAnalyzer in the
past, but with the introduction of the ReloadableCustomAnalyzer this needs to be
added as an option where the analysis mode gets propagated.
Closes#44625
This commit converts several utility classes that implement Streamable
to have StreamInput constructors. It also adds a default version of
readFrom to Streamable so that overriding to throw UOE is not necessary.
relates #34389
This commit converts several more classes from streamable to writeable
in server, mostly within the o.e.index and o.e.persistent packages.
relates #34389
* Allow empty configuration for SLM policies
When putting or updating a snapshot lifecycle policy it was not possible
to elide the `config` map. This commit makes the configuration optional,
the same way that it is when taking a snapshot.
Relates to #38461
* Add Objects.requireNonNull for required parts of the policy
* Expose index age in ILM explain output
This adds the index's age to the ILM explain output, for example:
```
{
"indices" : {
"ilm-000001" : {
"index" : "ilm-000001",
"managed" : true,
"policy" : "full-lifecycle",
"lifecycle_date" : "2019-07-16T19:48:22.294Z",
"lifecycle_date_millis" : 1563306502294,
"age" : "1.34m",
"phase" : "hot",
"phase_time" : "2019-07-16T19:48:22.487Z",
... etc ...
}
}
}
```
This age can be used to tell when ILM will transition the index to the
next phase, based on that phase's `min_age`.
Resolves#38988
* Expose age in getters and in HLRC
If the setting on the follower and the leader are identical after
filtering out private and internal settings, then we should not call
update setting (on the follower) as there's nothing to change. Moreover,
this makes the ShardFollowTask abort as it considers
ActionRequestValidationException (caused by an empty update setting
request) as a fatal error.
Closes#44521
A tool to work with snapshots.
Co-authored by @original-brownbear.
This commit adds snapshot tool and the single command cleanup, that
cleans up orphaned files for S3.
Snapshot tool lives in x-pack/snapshot-tool.
(cherry picked from commit fc4aed44dd975d83229561090f957a95cc76b287)
Removes the warning suppression -Xlint:-deprecation,-rawtypes,-serial,-try,-unchecked.
Many warnings were unchecked warnings in the test code often because of the use of mocks.
These are suppressed with @SuppressWarning
many classes still use the Streamable constructors of HandledTransportAction,
this commit moves more of those classes to the new Writeable constructors.
relates #34389.
this commit removes usage of the deprecated
constructor with a single argument and no Writeable.Reader.
The purpose of this is to reduce the boilerplate necessary for
properly implementing a new action, as well as reducing the
chances of using the incorrect super constructor while classes
are being migrated to Writeable
relates #34389.
This commit converts all remaining ActionType response classes to
writeable in xpack core. It also converts a few from server which were
used by xpack core.
relates #34389
Today we have an annotation for controlling logging levels in
tests. This annotation serves two purposes, one is to control the
logging level used in tests, when such control is needed to impact and
assert the behavior of loggers in tests. The other use is when a test is
failing and additional logging is needed. This commit separates these
two concerns into separate annotations.
The primary motivation for this is that we have a history of leaving
behind the annotation for the purpose of investigating test failures
long after the test failure is resolved. The accumulation of these stale
logging annotations has led to excessive disk consumption. Having
recently cleaned this up, we would like to avoid falling into this state
again. To do this, we are adding a link to the test failure under
investigation to the annotation when used for the purpose of
investigating test failures. We will add tooling to inspect these
annotations, in the same way that we have tooling on awaits fix
annotations. This will enable us to report on the use of these
annotations, and report when stale uses of the annotation exist.
This commit adds constructors to AcknolwedgedRequest subclasses to
implement Writeable.Reader, and ensures all future subclasses implement
the same.
relates #34389
This commit converts the request and response classes for broadcast
actions to implement ctors for Writeable.Reader and forces all future
implementations to implement the same.
relates #34389
Registering a channel with a selector is a required operation for the
channel to be handled properly. Currently, we mix the registeration with
other setup operations (ip filtering, SSL initiation, etc). However, a
fail to register is fatal. This PR modifies how registeration occurs to
immediately close the channel if it fails.
There are still two clear loopholes for how a user can interact with a
channel even if registration fails. 1. through the exception handler.
2. through the channel accepted callback. These can perhaps be improved
in the future. For now, this PR prevents writes from proceeding if the
channel is not registered.
This commit avoids a situation where we might stack overflow in the
auto-follower coordinator. In the face of repeated failures to get the
remote cluster state, we would previously be called back on the same
thread and then recurse to try again. If this failure persists, the
repeated callbacks on the same thread would lead to a stack
overflow. The repeated failures can occur, for example, if the connect
queue is full when we attempt to make a connection to the remote
cluster. This commit avoids this by truncating the call stack if we are
called back on the same thread as the initial request was made on.
This commit avoids an NPE when checking for privileges to follow
indices. The problem here is that in some cases we might not be able to
read the authentication info from the thread context. In that case, a
null user would be returned and we were not guarding against this.
* Migrate ML Actions to use writeable ActionType (#44302)
This commit converts all the StreamableResponseActionType
actions in the ML core module to be ActionType and leverage
the Writeable infrastructure.
This improves the error message when encrypting of sensitive watcher
data is configured, but no system file was specified in the keystore.
This error message is displayed on startup.
This also closes the input stream of the secure file properly.
Closes#43619
* [ML][Data Frame] treat bulk index failures as an indexing failure
* removing redundant public modifier
* changing to an ElasticsearchException
* fixing redundant public modifier
The failure is correctly getting propagated, this commit adds support to
explicitly look for .watch-history failures using the same logging strategy
as triggered watch failures.
* Add Snapshot Lifecycle Management (#43934)
* Add SnapshotLifecycleService and related CRUD APIs
This commit adds `SnapshotLifecycleService` as a new service under the ilm
plugin. This service handles snapshot lifecycle policies by scheduling based on
the policies defined schedule.
This also includes the get, put, and delete APIs for these policies
Relates to #38461
* Make scheduledJobIds return an immutable set
* Use Object.equals for SnapshotLifecyclePolicy
* Remove unneeded TODO
* Implement ToXContentFragment on SnapshotLifecyclePolicyItem
* Copy contents of the scheduledJobIds
* Handle snapshot lifecycle policy updates and deletions (#40062)
(Note this is a PR against the `snapshot-lifecycle-management` feature branch)
This adds logic to `SnapshotLifecycleService` to handle updates and deletes for
snapshot policies. Policies with incremented versions have the old policy
cancelled and the new one scheduled. Deleted policies have their schedules
cancelled when they are no longer present in the cluster state metadata.
Relates to #38461
* Take a snapshot for the policy when the SLM policy is triggered (#40383)
(This is a PR for the `snapshot-lifecycle-management` branch)
This commit fills in `SnapshotLifecycleTask` to actually perform the
snapshotting when the policy is triggered. Currently there is no handling of the
results (other than logging) as that will be added in subsequent work.
This also adds unit tests and an integration test that schedules a policy and
ensures that a snapshot is correctly taken.
Relates to #38461
* Record most recent snapshot policy success/failure (#40619)
Keeping a record of the results of the successes and failures will aid
troubleshooting of policies and make users more confident that their
snapshots are being taken as expected.
This is the first step toward writing history in a more permanent
fashion.
* Validate snapshot lifecycle policies (#40654)
(This is a PR against the `snapshot-lifecycle-management` branch)
With the commit, we now validate the content of snapshot lifecycle policies when
the policy is being created or updated. This checks for the validity of the id,
name, schedule, and repository. Additionally, cluster state is checked to ensure
that the repository exists prior to the lifecycle being added to the cluster
state.
Part of #38461
* Hook SLM into ILM's start and stop APIs (#40871)
(This pull request is for the `snapshot-lifecycle-management` branch)
This change allows the existing `/_ilm/stop` and `/_ilm/start` APIs to also
manage snapshot lifecycle scheduling. When ILM is stopped all scheduled jobs are
cancelled.
Relates to #38461
* Add tests for SnapshotLifecyclePolicyItem (#40912)
Adds serialization tests for SnapshotLifecyclePolicyItem.
* Fix improper import in build.gradle after master merge
* Add human readable version of modified date for snapshot lifecycle policy (#41035)
* Add human readable version of modified date for snapshot lifecycle policy
This small change changes it from:
```
...
"modified_date": 1554843903242,
...
```
To
```
...
"modified_date" : "2019-04-09T21:05:03.242Z",
"modified_date_millis" : 1554843903242,
...
```
Including the `"modified_date"` field when the `?human` field is used.
Relates to #38461
* Fix test
* Add API to execute SLM policy on demand (#41038)
This commit adds the ability to perform a snapshot on demand for a policy. This
can be useful to take a snapshot immediately prior to performing some sort of
maintenance.
```json
PUT /_ilm/snapshot/<policy>/_execute
```
And it returns the response with the generated snapshot name:
```json
{
"snapshot_name" : "production-snap-2019.04.09-rfyv3j9qreixkdbnfuw0ug"
}
```
Note that this does not allow waiting for the snapshot, and the snapshot could
still fail. It *does* record this information into the cluster state similar to
a regularly trigged SLM job.
Relates to #38461
* Add next_execution to SLM policy metadata (#41221)
* Add next_execution to SLM policy metadata
This adds the next time a snapshot lifecycle policy will be executed when
retriving a policy's metadata, for example:
```json
GET /_ilm/snapshot?human
{
"production" : {
"version" : 1,
"modified_date" : "2019-04-15T21:16:21.865Z",
"modified_date_millis" : 1555362981865,
"policy" : {
"name" : "<production-snap-{now/d}>",
"schedule" : "*/30 * * * * ?",
"repository" : "repo",
"config" : {
"indices" : [
"foo-*",
"important"
],
"ignore_unavailable" : true,
"include_global_state" : false
}
},
"next_execution" : "2019-04-15T21:16:30.000Z",
"next_execution_millis" : 1555362990000
},
"other" : {
"version" : 1,
"modified_date" : "2019-04-15T21:12:19.959Z",
"modified_date_millis" : 1555362739959,
"policy" : {
"name" : "<other-snap-{now/d}>",
"schedule" : "0 30 2 * * ?",
"repository" : "repo",
"config" : {
"indices" : [
"other"
],
"ignore_unavailable" : false,
"include_global_state" : true
}
},
"next_execution" : "2019-04-16T02:30:00.000Z",
"next_execution_millis" : 1555381800000
}
}
```
Relates to #38461
* Fix and enhance tests
* Figured out how to Cron
* Change SLM endpoint from /_ilm/* to /_slm/* (#41320)
This commit changes the endpoint for snapshot lifecycle management from:
```
GET /_ilm/snapshot/<policy>
```
to:
```
GET /_slm/policy/<policy>
```
It mimics the ILM path only using `slm` instead of `ilm`.
Relates to #38461
* Add initial documentation for SLM (#41510)
* Add initial documentation for SLM
This adds the initial documentation for snapshot lifecycle management.
It also includes the REST spec API json files since they're sort of
documentation.
Relates to #38461
* Add `manage_slm` and `read_slm` roles (#41607)
* Add `manage_slm` and `read_slm` roles
This adds two more built in roles -
`manage_slm` which has permission to perform any of the SLM actions, as well as
stopping, starting, and retrieving the operation status of ILM.
`read_slm` which has permission to retrieve snapshot lifecycle policies as well
as retrieving the operation status of ILM.
Relates to #38461
* Add execute to the test
* Fix ilm -> slm typo in test
* Record SLM history into an index (#41707)
It is useful to have a record of the actions that Snapshot Lifecycle
Management takes, especially for the purposes of alerting when a
snapshot fails or has not been taken successfully for a certain amount of
time.
This adds the infrastructure to record SLM actions into an index that
can be queried at leisure, along with a lifecycle policy so that this
history does not grow without bound.
Additionally,
SLM automatically setting up an index + lifecycle policy leads to
`index_lifecycle` custom metadata in the cluster state, which some of
the ML tests don't know how to deal with due to setting up custom
`NamedXContentRegistry`s. Watcher would cause the same problem, but it
is already disabled (for the same reason).
* High Level Rest Client support for SLM (#41767)
* High Level Rest Client support for SLM
This commit add HLRC support for SLM.
Relates to #38461
* Fill out documentation tests with tags
* Add more callouts and asciidoc for HLRC
* Update javadoc links to real locations
* Add security test testing SLM cluster privileges (#42678)
* Add security test testing SLM cluster privileges
This adds a test to `PermissionsIT` that uses the `manage_slm` and `read_slm`
cluster privileges.
Relates to #38461
* Don't redefine vars
* Add Getting Started Guide for SLM (#42878)
This commit adds a basic Getting Started Guide for SLM.
* Include SLM policy name in Snapshot metadata (#43132)
Keep track of which SLM policy in the metadata field of the Snapshots
taken by SLM. This allows users to more easily understand where the
snapshot came from, and will enable future SLM features such as
retention policies.
* Fix compilation after master merge
* [TEST] Move exception wrapping for devious exception throwing
Fixes an issue where an exception was created from one line and thrown in another.
* Fix SLM for the change to AcknowledgedResponse
* Add Snapshot Lifecycle Management Package Docs (#43535)
* Fix compilation for transport actions now that task is required
* Add a note mentioning the privileges needed for SLM (#43708)
* Add a note mentioning the privileges needed for SLM
This adds a note to the top of the "getting started with SLM"
documentation mentioning that there are two built-in privileges to
assist with creating roles for SLM users and administrators.
Relates to #38461
* Mention that you can create snapshots for indices you can't read
* Fix REST tests for new number of cluster privileges
* Mute testThatNonExistingTemplatesAreAddedImmediately (#43951)
* Fix SnapshotHistoryStoreTests after merge
* Remove overridden newResponse functions that have been removed
* Fix compilation for backport
* Fix get snapshot output parsing in test
* [DOCS] Add redirects for removed autogen anchors (#44380)
* Switch <tt>...</tt> in javadocs for {@code ...}
make checkpointing more robust:
- do not let checkpointing fail if indexes got deleted
- treat missing seqNoStats as just created indices (checkpoint 0)
- loglevel: do not treat failed updated checks as error
fixes#43992
This commit converts all the StreamableResponseActionType security
classes in xpack core to ActionType, implementing Writeable for their
response classes.
relates #34389
When getting authentication info from the thread context, it might be
that we encounter an I/O exception. Today we swallow this exception and
return a null authentication info to the caller. Yet, this could be
hiding bugs or errors. This commits adjusts this behavior so that we no
longer swallow the exception.
Test clusters currently has its own set of logic for dealing with
finding different versions of Elasticsearch, downloading them, and
extracting them. This commit converts testclusters to use the
DistributionDownloadPlugin.
This commit creates new base classes for master node actions whose
response types still implement Streamable. This simplifies both finding
remaining classes to convert, as well as creating new master node
actions that use Writeable for their responses.
relates #34389
* HLRC: Fix '+' Not Correctly Encoded in GET Req.
* Encode `+` correctly as `%2B` in URL paths
* Keep encoding `+` as space in URL parameters
* Closes#33077
This commit modifies bwc behavior in FindFileStructureAction to check
against a concrete version instead of Version.CURRENT. Checking against
Version.CURRENT does not work since it is changing, in addition to it
having different meanings on each branch.
relates #42501
Rewrites how continuous data frame transforms calculates and handles buckets that require an update. Instead of storing the whole set in memory, it pages through the updates using a 2nd cursor. This lowers memory consumption and prevents problems with limits at query time (max_terms_count). The list of updates can be re-retrieved in a failure case (#43662)
This commit moves the Supplier variant of HandledTransportAction to have
a different ordering than the Writeable.Reader variant. The Supplier
version is used for the legacy Streamable, and currently having the
location of the Writeable.Reader vs Supplier in the same place forces
using casts of Writeable.Reader to select the correct super constructor.
This change in ordering allows easier migration to Writeable.Reader.
relates #34389
This change makes the process of verifying the signature of
official plugins FIPS 140 compliant by defaulting to use the
BouncyCastle FIPS provider and adding a dependency to bcpg-fips
that implement parts of openPGP in a FIPS compliant manner.
In already FIPS 140 enabled environments that use the
BouncyCastle FIPS provider, the bcfips dependency is redundant
but doesn't cause an issue as it will be added only in the classpath
of the cli-tools
This is a backport of #44224
Fixes a bug in the PKI authentication. This manifests when there
are multiple PKI realms configured in the chain, with different
principal parse patterns. There are a few configuration scenarios
where one PKI realm might parse the principal from the Subject
DN (according to the `username_pattern` realm setting) but
another one might do the truststore validation (according to
the truststore.* realm settings).
This is caused by the two passes through the realm chain, first to
build the authentication token and secondly to authenticate it, and
that the X509AuthenticationToken sets the principal during
construction.
Simplifies AbstractSimpleTransportTestCase to use JVM-local ports and also adds an assertion so
that cases like #44134 can be more easily debugged. The likely reason for that one is that a test,
which was repeated again and again while always spawning a fresh Gradle worker (due to Gradle
daemon) kept increasing Gradle worker IDs, causing an overflow at some point.
Now that ML job configs are stored in an index rather than
cluster state, availability of the .ml-config index is very
important to the operation of ML. When a cluster starts up
the ML persistent tasks will be considered for node
assignment very early on. It is best in this case if
assignment is deferred until after the .ml-config index is
available.
The introduction of data frame analytics jobs has made this
problem worse, because anomaly detection jobs already waited
for the primary shards of the .ml-state, .ml-anomalies-shared
and .ml-meta indices to be available before doing node
assignment, and by coincidence this would probably lead to
the primary shards of .ml-config also being searchable. But
data frame analytics jobs had no other index checks prior to
this change.
This fixes problem 2 of #44156
* The incompatible snapshots logic was created to track 1.x snapshots that
became incompatible with 2.x
* It serves no purpose at this point
* It adds an additional GET request to every loading of
RepositoryData (from loading the incompatible snapshots blob)
By default, we don't check ranges while indexing geo_shapes. As a
result, it is possible to index geoshapes that contain contain
coordinates outside of -90 +90 and -180 +180 ranges. Such geoshapes
will currently break SQL and ML retrieval mechanism. This commit removes
these restriction from the validator is used in SQL and ML retrieval.
The base classes for transport requests and responses currently
implement Streamable and Writeable. The writeTo method on these base
classes is implemented with an empty implementation. Not only does this
complicate subclasses to think they need to call super.writeTo, but it
also can lead to not implementing writeTo when it should have been
implemented, or extendiong one of these classes when not necessary,
since there is nothing to actually implement.
This commit removes the empty writeTo from these base classes, and fixes
subclasses to not call super and in some cases implement an empty
writeTo themselves.
relates #34389
This commit adds permissions validation on the indices provided in the
enrich policy. These indices should be validated at store time so as not
to have cryptic error messages in the event the user does not have
permissions to access said indices.
AggregatorFactory was generic over itself, but it doesn't appear we
use this functionality anywhere (e.g. to allow the super class
to declare arguments/return types generically for subclasses to
override). Most places use a wildcard constraint, and even when a
concrete type is specified it wasn't used.
But since AggFactories are widely used, this led to
the generic touching many pieces of code and making type signatures
fairly complex
When the ML memory tracker is refreshed and a refresh is
already in progress the idea is that the second and
subsequent refresh requests receive the same response as
the currently in progress refresh.
There was a bug that if a refresh failed then the ML
memory tracker's view of whether a refresh was in progress
was not reset, leading to every subsequent request being
registered to receive a response that would never come.
This change makes the ML memory tracker pass on failures
as well as successes to all interested parties and reset
the list of interested parties so that further refresh
attempts are possible after either a success or failure.
This fixes problem 1 of #44156
This commit documents the backup and restore of a cluster's
security configuration.
It is not possible to only backup (or only restore) security
configuration, independent to the rest of the cluster's conf,
so this describes how a full configuration backup&restore
will include security as well. Moreover, it explains how part
of the security conf data resides on the special .security
index and how to backup that using regular data snapshot API.
Co-Authored-By: Lisa Cawley <lcawley@elastic.co>
Co-Authored-By: Tim Vernum <tim@adjective.org>
* Add test for SQL not being available error message in JDBC.
* Add a new qa sub-project that explicitly disables SQL XPack module in Gradle.
(cherry picked from commit 8a1ac8a3a88a325ec9b99963e0fa288c18ee0ee5)
* The created array didn't have the correct initial size while attempting to resolve multiple indices
(cherry picked from commit 341006e9913e831408f5bbc7f8ad8c453a7f630e)
Custom timestamp overrides provided to the find_file_structure
endpoint produced an invalid Grok pattern if the fractional
seconds separator was a dot rather than a comma or colon.
This commit fixes that problem and adds tests for this sort
of timestamp override.
Fixes#44110
Previously a data frame transform would check whether the
source index was changed every 10 seconds. Sometimes it
may be desirable for the check to be done less frequently.
This commit increases the default to 60 seconds but also
allows the frequency to be overridden by a setting in the
data frame transform config.
Data frame task responses had logic to return a HTTP 500 status code if there was
any node or task failures even if other tasks in the same request reported correctly.
This is different to how other task responses are handled where a 200 is always
returned leaving the client should check for failures. Returning a 500 also breaks
the high level rest client so always return a 200
Closes#44011
This PR enables the indexing optimization using sequence numbers on
replicas. With this optimization, indexing on replicas should be faster
and use less memory as it can forgo the version lookup when possible.
This change also deactivates the append-only optimization on replicas.
Relates #34099
Currently when a document misses a vector value, vector function
returns 0 as a score for this document. We think this is incorrect
behaviour.
With this change, an error will be thrown if vector functions are
used with docs that are missing vector doc values.
Also VectorScriptDocValues is modified to allow size() function,
which can be used to check if a document has a value for the
vector field.
This commit converts the ConnectionManager's openConnection and connectToNode methods to
async-style. This will allow us to not block threads anymore when opening connections. This PR also
adapts the cluster coordination subsystem to make use of the new async APIs, allowing to remove
some hacks in the test infrastructure that had to account for the previous synchronous nature of the
connection APIs.
This commit ensures that cluster state publications to self also go through the transport layer. This
allows voting-only nodes to intercept the publication to self.
Fixes an issue discovered by a test failure where a voting-only node, which was the only
bootstrapped node, would not step down as master after state transfer because publishing to self
would succeed.
Closes#43631
The count should match the number of all df-analytics that
matched the id in the request. However, we set the count
to the number of df-analytics returned which was bound to the
`size` parameter. This commit fixes this by setting the count
to the count of the `get` response.
This commit changes the way we manage refreshes in the index engines.
Instead of relying on a SearcherManager, this change uses a ReaderManager that
creates ElasticsearchDirectoryReader when needed. Searchers are now created on-demand
(when acquireSearcher is called) from the current ElasticsearchDirectoryReader.
It also slightly changes the Engine.Searcher to extend IndexSearcher in order
to simplify the usage in the consumer.
A bug was introduced in 6.6.0 when we added support for
rollup indices. Rollup caps does NOT support looking at
remote indices, consequently, since we always look up rollup
caps, the datafeed fails with an error if its config
includes a concrete remote index. (When all remote indices
in a datafeed config are wildcards the problem did not
occur.)
The rollups feature does not support remote indices, so if
there is any remote index in a datafeed config (wildcarded
or not), we can skip the rollup cap checks. This PR
implements that change.
This brings TokenizerFactory into line with CharFilterFactory and TokenFilterFactory,
and removes the need to pass around tokenizer names when building custom analyzers.
As this means that TokenizerFactory is no longer a functional interface, the commit also
adds a factory method to TokenizerFactory to make construction simpler.
* [ML][Data Frame] Adding bwc tests for pivot transform (#43506)
* [ML][Data Frame] Adding bwc tests for pivot transform
* adding continuous transforms
* adding continuous dataframes to bwc
* adding continuous data frame tests
* Adding rolling upgrade tests for continuous df
* Fixing test
* Adjusting indices used in BWC, and handling NPE for seq_no_stats
* updating and muting specific bwc test
* Adjusting bwc tests for backport
Introduced proxy api the handle the search request load that originates
from enrich processor. The enrich processor can execute many search
requests that execute asynchronously in parallel and that can easily overwhelm
the search thread pool on nodes. In order to protect this the Coordinator
queues the search requests and only executes a fixed number of search requests
in parallel.
Besides this; the Coordinator tries to include as much as possible search requests
(up to a defined maximum) inside a multi search request in order to reduce the number
of remote api calls to be made from the node that performs ingestion.
This introduces a `failed` state to which the data frame analytics
persistent task is set to when something unexpected fails. It could
be the process crashing, the results processor hitting some error,
etc. The failure message is then captured and set on the task state.
From there, it becomes available via the _stats API as `failure_reason`.
The df-analytics stop API now has a `force` boolean parameter. This allows
the user to call it for a failed task in order to reset it to `stopped` after
we have ensured the failure has been communicated to the user.
This commit also adds the analytics version in the persistent task
params as this allows us to prevent tasks to run on unsuitable nodes in
the future.
This commit deprecates the `transport.profiles.*.xpack.security.type`
setting. This setting is used to configure a profile that would only
allow client actions. With the upcoming removal of the transport client
the setting should also be deprecated so that it may be removed in
a future version.
This adds the ability to execute an action for each element that occurs
in an array, for example you could sent a dedicated slack action for
each search hit returned from a search.
There is also a limit for the number of actions executed, which is
hardcoded to 100 right now, to prevent having watches run forever.
The watch history logs each action result and the total number of actions
the were executed.
Relates #34546
All valid licenses permit security, and the only license state where
we don't support security is when there is a missing license.
However, for safety we should attach the system (or xpack/security)
user to internally originated actions even if the license is missing
(or, more strictly, doesn't support security).
This allows all nodes to communicate and send internal actions (shard
state, handshake/pings, etc) even if a license is transitioning
between a broken state and a valid state.
Relates: #42215
Backport of: #43468
Document level security was depending on the shared
"BitsetFilterCache" which (by design) never expires its entries.
However, when using DLS queries - particularly templated ones - the
number (and memory usage) of generated bitsets can be significant.
This change introduces a new cache specifically for BitSets used in
DLS queries, that has memory usage constraints and access time expiry.
The whole cache is automatically cleared if the role cache is cleared.
Individual bitsets are cleared when the corresponding lucene index
reader is closed.
The cache defaults to 50MB, and entries expire if unused for 7 days.
Backport of: #43669
If an item in the bulk request fails, that could be for a variety of
reasons - it may be that the underlying behaviour of security has
changed, or it may just be a transient failure during testing.
Simply asserting a `true`/`false` value produces failure messages that
are difficult to diagnose and debug. Using hamcert (`assertThat`) will
make it easier to understand the causes of failures in this test.
Backport of: #43725
Add the "Authorization" section to the API key API docs.
These APIs require The new manage_api_key cluster privilege.
Relates: #43865
Backport of: #43811
Typically, dense vectors of both documents and queries must have the same
number of dimensions. Different number of dimensions among documents
or query vector indicate an error. This PR enforces that all vectors
for the same field have the same number of dimensions. It also enforces
that query vectors have the same number of dimensions.
* [ML][Data Frame] add node attr to GET _stats (#43842)
* [ML][Data Frame] add node attr to GET _stats
* addressing testing issues with node.attributes
* adjusting for backport
* fix org.elasticsearch.xpack.watcher.test.integration.RejectedExecutionTests (#41777)
This commit un-mutes org.elasticsearch.xpack.watcher.test.integration.RejectedExecutionTests
which was failing intermittently due to a logic bug. It is not possible to use the real
Watcher scheduler (which is needed for this test) and reliabliby count the .triggered-watches
since current count of documents in the .triggered-watches index is based on the timing of the
scheduler and the ability to delete based on the Watcher and Write thread pools.
This commit simply removes the .triggered-watch check and relies soley on the .watcher-history
index as an indication that operations that can occur when the Watcher threadpool is rejecting.
closes#41734
* fix unlikely bug that can prevent Watcher from restarting (#42030)
The bug fixed here is unlikely to happen. It requires ES to be started with
ILM disabled, Watcher enabled, and Watcher explicitly stopped and restarted.
Due to template validation Watcher does not fully start and can result in a
partially started state. This is an unlikely scenerio outside of the testing
framework.
Note - this bug was introduced while the test that would have caught it was
muted. The test remains muted since the underlying cuase of the random failures
has not been identified. When this test is un-muted it will now work.
Currently the repsonse of the "_reload_search_analyzer" endpoint contains the
index names and nodeIds of indices were analyzers reloading was triggered. This
change add the names of the search-time analyzers that were reloaded.
Closes#43804
This adds a new cluster privilege for manage_api_key. Users with this
privilege are able to create new API keys (as a child of their own
user identity) and may also get and invalidate any/all API keys
(including those owned by other users).
Backport of: #43728
* [ML][Data Frame] using transform creation version for node assignment (#43764)
* [ML][Data Frame] using transform creation version for node assignment
* removing unused imports
* Addressing PR comment
* adjusing for backport
As defined in https://tools.ietf.org/html/rfc6749#section-2.3.1
both client id and client secret need to be encoded with the
application/x-www-form-urlencoded encoding algorithm when used as
credentials for HTTP Basic Authentication in requests to the OP.
Resolves#43709
This is an odd backport of #41774
UserRoleMapper.UserData is constructed by each realm and it is used to
"match" role mapping expressions that eventually supply the role names
of the principal.
This PR filters out `null` collection values (lists and maps), for the groups
and metadata, which get to take part in the role mapping, in preparation
for using Java 9 collection APIs. It filters them as soon as possible, during
the construction.
This test verifies that enrich policies still exist after a full
cluster restart. If EnrichPolicy is not registered as named xcontent
in EnrichPlugin class then this test fails.
This commit merges the `object-fields` feature branch. The new 'flattened
object' field type allows an entire JSON object to be indexed into a field, and
provides limited search functionality over the field's contents.
Added an additional method to the Processor interface to allow a
processor implementation to make a non blocking call.
Also added semaphore in order to avoid search thread pools from rejecting
search requests originating from the match processor. This is a temporary workaround.
Action is a class that encapsulates meta information about an action
that allows it to be called remotely, specifically the action name and
response type. With recent refactoring, the action class can now be
constructed as a static constant, instead of needing to create a
subclass. This makes the old pattern of creating a singleton INSTANCE
both misnamed and lacking a common placement.
This commit renames Action to ActionType, thus allowing the old INSTANCE
naming pattern to be TYPE on the transport action itself. ActionType
also conveys that this class is also not the action itself, although
this change does not rename any concrete classes as those will be
removed organically as they are converted to TYPE constants.
relates #34389
Renames `_id_copy` to `ml__id_copy` as field names starting with
underscore are deprecated. The new field name `ml__id_copy` was
chosen as an obscure enough field that users won't have in their data.
Otherwise, this field is only intented to be used by df-analytics.
Introduces a new `ConsistentSecureSettingsValidatorService` service that exposes
a single public method, namely `allSecureSettingsConsistent`. The method returns
`true` if the local node's secure settings (inside the keystore) are equal to the
master's, and `false` otherwise. Technically, the local node has to have exactly
the same secure settings - setting names should not be missing or in surplus -
for all `SecureSetting` instances that are flagged with the newly introduced
`Property.Consistent`. It is worth highlighting that the `allSecureSettingsConsistent`
is not a consensus view across the cluster, but rather the local node's perspective
in relation to the master.
If a job is opened and then closed and does nothing in
between then it should not persist any results or state
documents. This change adapts the no-op job test to
assert no results in addition to no state, and to log
any documents that cause this assertion to fail.
Relates elastic/ml-cpp#512
Relates #43680
The Action base class currently works for both Streamable and Writeable
response types. This commit intorduces StreamableResponseAction, for
which only the legacy Action implementions which provide newResponse()
will extend. This eliminates the need for overriding newResponse() with
an UnsupportedOperationException.
relates #34389
Since #41817 was merged the ml-cpp zip file for any
given version has been cached indefinitely by Gradle.
This is problematic, particularly in the case of the
master branch where the version 8.0.0-SNAPSHOT will
be in use for more than a year.
This change tells Gradle that the ml-cpp zip file is
a "changing" dependency, and to check whether it has
changed every two hours. Two hours is a compromise
between checking on every build and annoying developers
with slow internet connections and checking rarely
causing bug fixes in the ml-cpp code to take a long
time to propagate through to elasticsearch PRs that
rely on them.
This change removes the ability to wrap an IndexSearcher in plugins. The IndexSearcherWrapper is replaced by an IndexReaderWrapper and allows to wrap the DirectoryReader only. This simplifies the creation of the context IndexSearcher that is used on a per request basis. This change also moves the optimization that was implemented in the security index searcher wrapper to the ContextIndexSearcher that now checks the live docs to determine how the search should be executed. If the underlying live docs is a sparse bit set the searcher will compute the intersection
betweeen the query and the live docs instead of checking the live docs on every document that match the query.
This commit adds support for multiple source indices.
In order to deal with multiple indices having different mappings,
it attempts a best-effort approach to merge the mappings assuming
there are no conflicts. In case conflicts exists an error will be
returned.
To allow users creating custom mappings for special use cases,
the destination index is now allowed to exist before the analytics
job runs. In addition, settings are no longer copied except for
the `index.number_of_shards` and `index.number_of_replicas`.
Currently changing resources (like dictionaries, synonym files etc...) of search
time analyzers is only possible by closing an index, changing the underlying
resource (e.g. synonym files) and then re-opening the index for the change to
take effect.
This PR adds a new API endpoint that allows triggering reloading of certain
analysis resources (currently token filters) that will then pick up changes in
underlying file resources. To achieve this we introduce a new type of custom
analyzer (ReloadableCustomAnalyzer) that uses a ReuseStrategy that allows
swapping out analysis components. Custom analyzers that contain filters that are
markes as "updateable" will automatically choose this implementation. This PR
also adds this capability to `synonym` token filters for use in search time
analyzers.
Relates to #29051
TransportNodesAction provides a mechanism to easily broadcast a request
to many nodes, and collect the respones into a high level response. Each
node has its own request type, with a base class of BaseNodeRequest.
This base request requires passing the nodeId to which the request will
be sent. However, that nodeId is not used anywhere. It is private to the
base class, yet serialized to each node, where the node could just as
easily find the nodeId of the node it is on locally.
This commit removes passing the nodeId through to the node request
creation, and guards its serialization so that we can remove the base
request class altogether in the future.
GatewayIndexStateIT#testRecoverBrokenIndexMetadata replies on the
flushing on shutdown. This behaviour, however, can be randomly disabled
in MockInternalEngine.
Closes#43034
* Deduplicate org.elasticsearch.xpack.core.dataframe.utils.TimeUtils and org.elasticsearch.xpack.core.ml.utils.time.TimeUtils into a common class: org.elasticsearch.xpack.core.common.time.TimeUtils.
* Add unit tests for parseTimeField and parseTimeFieldToInstant methods
Adds support for the situation where only voting-only nodes are bootstrapped. In that case, they will
still try to become elected and bring full master nodes into the cluster.
Search requests executed through the SecurityIndexSearcherWrapper throw
an UnsupportedOperationException if they match a sparse role query.
When low level cancellation is activated (which is the default since #42857),
the context index searcher creates a weight that doesn't handle #scorer.
This change fixes this bug and adds a test to ensure that we check this case.
* Use atomic boolean to guard wakeups
* Don't trigger wakeups from the select loops thread itself for registering and closing channels
* Don't needlessly queue writes
Co-authored-by: Tim Brooks <tim@uncontended.net>
* [ML][Data Frame] Add support for allow_no_match for endpoints (#43490)
* [ML][Data Frame] Add support for allow_no_match parameter in endpoints
Adds support for:
* Get Transforms
* Get Transforms stats
* stop transforms
* Update DataFrameTransformDocumentationIT.java
This change introduces a new setting,
xpack.ml.process_connect_timeout, to enable
the timeout for one of the external ML processes
to connect to the ES JVM to be increased.
The timeout may need to be increased if many
processes are being started simultaneously on
the same machine. This is unlikely in clusters
with many ML nodes, as we balance the processes
across the ML nodes, but can happen in clusters
with a single ML node and a high value for
xpack.ml.node_concurrent_job_allocations.
A voting-only master-eligible node is a node that can participate in master elections but will not act
as a master in the cluster. In particular, a voting-only node can help elect another master-eligible
node as master, and can serve as a tiebreaker in elections. High availability (HA) clusters require at
least three master-eligible nodes, so that if one of the three nodes is down, then the remaining two
can still elect a master amongst them-selves. This only requires one of the two remaining nodes to
have the capability to act as master, but both need to have voting powers. This means that one of
the three master-eligible nodes can be made as voting-only. If this voting-only node is a dedicated
master, a less powerful machine or a smaller heap-size can be chosen for this node. Alternatively, a
voting-only non-dedicated master node can play the role of the third master-eligible node, which
allows running an HA cluster with only two dedicated master nodes.
Closes#14340
Co-authored-by: David Turner <david.turner@elastic.co>
This commit changes the `role_descriptors` field from required
to optional when creating API key. The default behavior in .NET ES
client is to omit properties with `null` value requiring additional
workarounds. The behavior for the API does not change.
Field names (`id`, `name`) in the invalidate api keys API documentation have been
corrected where they were wrong.
Closes#42053
Now that the fix krb5-kdc fixture (entropy problem in docker container)
is in and the converting `kerberos-tests` to testclusters is done,
enabling the kerberos-tests
Closes#40678
After two recent changes (#38824 and #33888), the _cat/indices API
no longer report information for active recovering indices and
non-replicated closed indices. It also misreport replicated closed
indices that are potentially not authorized for the user.
This commit changes how the cat action works by first using the
Get Settings API in order to resolve authorized indices. It then uses
the Cluster State, Cluster Health and Indices Stats APIs to retrieve
information about the indices.
Closes#39933
This merges the initial work that adds a framework for performing
machine learning analytics on data frames. The feature is currently experimental
and requires a platinum license. Note that the original commits can be
found in the `feature-ml-data-frame-analytics` branch.
A new set of APIs is added which allows the creation of data frame analytics
jobs. Configuration allows specifying different types of analysis to be performed
on a data frame. At first there is support for outlier detection.
The APIs are:
- PUT _ml/data_frame/analysis/{id}
- GET _ml/data_frame/analysis/{id}
- GET _ml/data_frame/analysis/{id}/_stats
- POST _ml/data_frame/analysis/{id}/_start
- POST _ml/data_frame/analysis/{id}/_stop
- DELETE _ml/data_frame/analysis/{id}
When a data frame analytics job is started a persistent task is created and started.
The main steps of the task are:
1. reindex the source index into the dest index
2. analyze the data through the data_frame_analyzer c++ process
3. merge the results of the process back into the destination index
In addition, an evaluation API is added which packages commonly used metrics
that provide evaluation of various analysis:
- POST _ml/data_frame/_evaluate
Add client to processor parameters in the ingest service.
Remove the search provider function from the processor parameters.
ExactMatchProcessor and Factory converted to use client.
Remove test cases that are no longer applicable from processor.
The test for now tests the enrich APIs in a multi node environment.
Picked EsIntegTestCase test over a real qa module in order to avoid
adding another module that starts a test cluster.
The error message if the native controller failed to run
(for example due to running Elasticsearch on an unsupported
platform) was not easy to understand. This change removes
pointless detail from the message and adds some hints about
likely causes.
Fixes#42341
Currently nio implements ip filtering at the channel context level. This
is kind of a hack as the application logic should be implemented at the
handler level. This commit moves the ip filtering into a channel
handler. This requires adding an indicator to the channel handler to
show when a channel should be closed.
This commit ensures that ILM's Shrink action will take node versions into
account when choosing which node to allocate to when shrinking an
index. Prior to this change, ILM could pick a node with a lower version
than some shards are already allocated to, which causes the new
allocation to fail as shards can't be relocated onto a node with a lower
version than they are already on.
As part of this, when making the decision about which node to allocate
to prior to Shrink, all shards in the index are considered, rather than
choosing a random shard to consider.
Further, the unit tests for the logic that chooses a node to allocate
shards to pre-shrink has been improved to validate the behavior in more
realistic and varied initial conditions.
This commit adds the manage_enrich privilege, which grants access to all
of the enrich processor lifecycle actions. In addition this commit also
creates a role which grants access to the generated indices.
Relates #41939
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
This commit replaces usages of Streamable with Writeable for the
AcknowledgedResponse and its subclasses, plus associated actions.
Note that where possible response fields were made final and default
constructors were removed.
This is a large PR, but the change is mostly mechanical.
Relates to #34389
Backport of #43414
* [ML][Data Frame] Add version and create_time to transform config (#43384)
* [ML][Data Frame] Add version and create_time to transform config
* s/transform_version/version s/Date/Instant
* fixing getter/setter for version
* adjusting for backport
After the network disruption a partition is created,
one side of which can form a cluster the other can't.
Ensure requests are sent to a node on the correct side
of the cluster
This replaces the use of char[] in the password length validation
code, with the use of SecureString
Although the use of char[] is not in itself problematic, using a
SecureString encourages callers to think about the lifetime of the
password object and to clear it after use.
Backport of: #42884
Local and global checkpoints currently do not correctly reflect what's persisted to disk. The issue is
that the local checkpoint is adapted as soon as an operation is processed (but not fsynced yet). This
leaves room for the history below the global checkpoint to still change in case of a crash. As we rely
on global checkpoints for CCR as well as operation-based recoveries, this has the risk of shard
copies / follower clusters going out of sync.
This commit required changing some core classes in the system:
- The LocalCheckpointTracker keeps track now not only of the information whether an operation has
been processed, but also whether that operation has been persisted to disk.
- TranslogWriter now keeps track of the sequence numbers that have not been fsynced yet. Once
they are fsynced, TranslogWriter notifies LocalCheckpointTracker of this.
- ReplicationTracker now keeps track of the persisted local and persisted global checkpoints of all
shard copies when in primary mode. The computed global checkpoint (which represents the
minimum of all persisted local checkpoints of all in-sync shard copies), which was previously stored
in the checkpoint entry for the local shard copy, has been moved to an extra field.
- The periodic global checkpoint sync now also takes async durability into account, where the local
checkpoints on shards only advance when the translog is asynchronously fsynced. This means that
the previous condition to detect inactivity (max sequence number is equal to global checkpoint) is
not sufficient anymore.
- The new index closing API does not work when combined with async durability. The shard
verification step is now requires an additional pre-flight step to fsync the translog, so that the main
verify shard step has the most up-to-date global checkpoint at disposition.
This commit removes some very old test logging annotations that appeared
to be added to investigate test failures that are long since closed. If
these are needed, they can be added back on a case-by-case basis with a
comment associating them to a test failure.
* Narrow period of Shrink action in which ILM prevents stopping
Prior to this change, we would prevent stopping of ILM if the index was
anywhere in the shrink action. This commit changes
`IndexLifecycleService` to allow stopping when in any of the innocuous
steps during shrink. This changes ILM only to prevent stopping if
absolutely necessary.
Resolves#43253
* Rename variable for ignore actions -> ignore steps
* Fix comment
* Factor test out to test *all* stoppable steps
* [ML][Data Frame] make response.count be total count of hits
* addressing line length check
* changing response count for filters
* adjusting serialization, variable name, and total count logic
* making count mandatory for creation
* [ML][Data Frame] adds new pipeline field to dest config (#43124)
* [ML][Data Frame] adds new pipeline field to dest config
* Adding pipeline support to _preview
* removing unused import
* moving towards extracting _source from pipeline simulation
* fixing permission requirement, adding _index entry to doc
* adjusting for java 8 compatibility
* adjusting bwc serialization version to 7.3.0
This PR is a backport a of #43214 from v8.0.0
A number of the aggregation base classes have an abstract doEquals() and doHashCode() (e.g. InternalAggregation.java, AbstractPipelineAggregationBuilder.java).
Theoretically this is so the sub-classes can add to the equals/hashCode and don't need to worry about calling super.equals(). In practice, it's mostly just confusing/inconsistent. And if there are more than two levels, we end up with situations like InternalMappedSignificantTerms which has to call super.doEquals() which defeats the point of having these overridable methods.
This PR removes the do versions and just use equals/hashCode ensuring the super when necessary.
* Return 0 for negative "free" and "total" memory reported by the OS
We've had a situation where the MX bean reported negative values for the
free memory of the OS, in those rare cases we want to return a value of
0 rather than blowing up later down the pipeline.
In the event that there is a serialization or creation error with regard
to memory use, this adds asserts so the failure will occur as soon as
possible and give us a better location for investigation.
Resolves#42157
* Fix test passing in invalid memory value
* Fix another test passing in invalid memory value
* Also change mem check in MachineLearning.machineMemoryFromStats
* Add background documentation for why we prevent negative return values
* Clarify comment a bit more
The randomization in this test would occasionally generate duplicate
node attribute keys, causing spurious test failures. This commit adjusts
the randomization to not generate duplicate keys and cleans up the data
structure used to hold the generated keys.
Backport of: https://github.com/elastic/elasticsearch/pull/43222
This commit replaces usages of Streamable with Writeable for the
SingleShardRequest / TransportSingleShardAction classes and subclasses of
these classes.
Note that where possible response fields were made final and default
constructors were removed.
Relates to #34389
Kibana wants to create access_token/refresh_token pair using Token
management APIs in exchange for kerberos tickets. `client_credentials`
grant_type requires every user to have `cluster:admin/xpack/security/token/create`
cluster privilege.
This commit introduces `_kerberos` grant_type for generating `access_token`
and `refresh_token` in exchange for a valid base64 encoded kerberos ticket.
In addition, `kibana_user` role now has cluster privilege to create tokens.
This allows Kibana to create access_token/refresh_token pair in exchange for
kerberos tickets.
Note:
The lifetime from the kerberos ticket is not used in ES and so even after it expires
the access_token/refresh_token pair will be valid. Care must be taken to invalidate
such tokens using token management APIs if required.
Closes#41943
This commit removes some trace logging for the token service in the
rolling upgrade tests. If there is an active investigation here, it
would be best to annotate this line with a comment in the source
indicating such. From my digging, it does not appear there is an active
investigation that relies on this logging, so we remove it.
This trace logging looks like it was copy/pasted from another test,
where the logging in that test was only added to investigate a test
failure. This commit removes the trace logging.
This was added to investigate a test failure over two years ago, yet
left behind. Since the test failure has been addressed since then, this
commit removes the trace logging.
* TestClusters: Convert the security plugin
This PR moves security tests to use TestClusters.
The TLS test required support in testclusters itself, so the correct
wait condition is configgured based on the cluster settings.
* PR review
The ML failover tests sometimes need to wait for jobs to be
assigned to new nodes following a node failure. They wait
10 seconds for this to happen. However, if the node that
failed was the master node and a new master was elected then
this 10 seconds might not be long enough as a refresh of the
memory stats will delay job assignment. Once the memory
refresh completes the persistent task will be assigned when
the next cluster state update occurs or after the periodic
recheck interval, which defaults to 30 seconds. Rather than
increase the length of the wait for assignment to 31 seconds,
this change decreases the periodic recheck interval to 1
second.
Fixes#43289
With this change, we will rebuild the live version map and local
checkpoint using documents (including soft-deleted) from the safe commit
when opening an internal engine. This allows us to safely prune away _id
of all soft-deleted documents as the version map is always in-sync with
the Lucene index.
Relates #40741
Supersedes #42979
* [ML][Data Frame] only complete task after state persistence
There is a race condition where the task could be completed, but there
is still a pending document write. This change moves
the task cancellation into the actionlistener of the state persistence.
intermediate commit
intermediate commit
* removing unused import
* removing unused const
* refreshing internal index after waiting for task to complete
* adjusting test data generation
* introduce state to the REST API specification
* change state over to stability
* CCR is no GA updated to stable
* SQL is now GA so marked as stable
* Introduce `internal` as state for API's, marks stable in terms of lifetime but unstable in terms of guarantees on its output format since it exposes internal representations
* make setting a wrong stability value, or not setting it at all an error that causes the YAML test suite to fail
* update spec files to be explicit about their stability state
* Document the fact that stability needs to be defined
Otherwise the YAML test runner will fail (with a nice exception message)
* address check style violations
* update rest spec unit tests to include stability
* found one more test spec file not declaring stability, made sure stability appears after documentation everywhere
* cluster.state is stable, mark response in some way to denote its a key value format that can be changed during minors
* mark data frame API's as beta
* remove internal and private as states for an API
* removed the wrong enum values in the Stability Enum in the previous commit
(cherry picked from commit 61c34bbd92f8f7e5f22fa411c6b682b0ebd8a99d)
It's possible for force merges kicked off by ILM to silently stop (due
to a node relocating for example). In which case, the segment count may
not reach what the user configured. In the subsequent `SegmentCountStep`
waiting for the expected segment count may wait indefinitely. Because of
this, this commit makes force merges "best effort" and then changes the
`SegmentCountStep` to simply report (at INFO level) if the merge was not
successful.
Relates to #42824Resolves#43245
We were stopping a node in the cluster at a time when
the replica shards of the .ml-state index might not
have been created. This change moves the wait for
green status to a point where the .ml-state index
exists.
Fixes#40546Fixes#41742
Forward port of #43111
A static code analysis revealed that we are not closing
the input stream in the post_data endpoint. This
actually makes no difference in practice, as the
particular InputStream implementation in this case is
org.elasticsearch.common.bytes.BytesReferenceStreamInput
and its close() method is a no-op. However, it is good
practice to close the stream anyway.
To be consistent with the `search.max_buckets` default setting,
set the hard limit of the PriorityQueue used for in memory sorting,
when sorting on an aggregate function, to 10000.
Fixes: #43168
(cherry picked from commit 079e012fdea68ea0a7daae078359495047e9c407)
- Previously, when shorting on an aggregate function the bucket
processing ended early when the explicit (LIMIT XXX) or the impliciti
limit of 512 was reached. As a consequence, only a set of grouping
buckets was processed and the results returned didn't reflect the global
ordering.
- Previously, the priority queue shorting method had an inverse
comparison check and the final response from the priority queue was also
returned in the inversed order because of the calls to the `pop()`
method.
Fixes: #42851
(cherry picked from commit 19909edcfdf5792b38c1363b07379783ebd0e6c4)
The machine learning feature of xpack has native binaries with a
different commit id than the rest of code. It is currently exposed in
the xpack info api. This commit adds that commit information to the ML
info api, so that it may be removed from the info api.
Previously 10 digit numbers were considered candidates to be
timestamps recorded as seconds since the epoch and 13 digit
numbers as timestamps recorded as milliseconds since the epoch.
However, this meant that we could detect these formats for
numbers that would represent times far in the future. As an
example ISBN numbers starting with 9 were detected as milliseconds
since the epoch since they had 13 digits.
This change tweaks the logic for detecting such timestamps to
require that they begin with 1 or 2. This means that numbers
that would represent times beyond about 2065 are no longer
detected as epoch timestamps. (We can add 3 to the definition
as we get closer to the cutoff date.)
Given the significant performance impact that NIOFS has when term dicts are
loaded off-heap this change enforces FstLoadMode#AUTO that loads term dicts
off heap only if the underlying index input indicates a memory map.
Relates to #43150
Infra has fixed#10462 by installing `haveged` on CI workers.
This commit enables the disabled fixture and tests, and mounts
`/dev/urandom` for the container so there is enough
entropy required for kdc.
Note: hdfs-repository tests have been disabled, will raise a separate issue for it.
Closes#40624Closes#40678
* [ML][Data Frame] cleaning up usage test since tasks are cancelled onfinish
* Update DataFrameUsageIT.java
* Fixing additional test, waiting for task to complete
* removing unused import
* unmuting test
When a search on some indices takes a long time, it may cause problems to other indices that are being searched as part of the same search request and being written to as well, because their search context needs to stay open for a long time. This is especially a problem when searching against throttled and non-throttled indices as part of the same request. The problem can be generalized though: this may happen whenever read-only indices are searched together with indices that are being written to. Search contexts staying open for a long time is only an issue for indices that are being written to, in practice.
This commit splits the search in two sub-searches: one for read-only indices, and one for ordinary indices. This way the two don't interfere with each other. The split is done only when size is greater than 0, no scroll is provided and query_then_fetch is used as search type. Otherwise, the search executes like before. Note that the returned num_reduce_phases reflect the number of reduction phases that were run. If the search is split in two, there are three reductions: one non-final for each search, and a final one that merges the results of the previous two.
Closes#40900
In these tests, we sleep for a small multiple of the renew interval,
then check that the retention leases are not changed. If a renewal
request takes longer than that interval because of GC or slow CI, then
the retention leases are not the same as before sleep. With this change,
we relax to assert that we eventually stop the renewable process.
Closes#39509
* stop data frame task after it finishes
* test auto stop
* adapt tests
* persist the state correctly and move stop into listener
* Calling `onStop` even if persistence fails, changing `stop` to rely on doSaveState
The description field of xpack featuresets is optionally part of the
xpack info api, when using the verbose flag. However, this information
is unnecessary, as it is better left for documentation (and the existing
descriptions describe anything meaningful). This commit removes the
description field from feature sets.
The tests for the ML TimeoutChecker rely on threads
not being interrupted after the TimeoutChecker is
closed. This change ensures this by making the
close() and setTimeoutExceeded() methods synchronized
so that the code inside them cannot execute
simultaneously.
Fixes#43097
It turns out that key rotation on the OP, can manifest as both
a BadJWSException and a BadJOSEException in nimbus-jose-jwt. As
such we cannot depend on matching only BadJWSExceptions to
determine if we should poll the remote JWKs for an update.
This has the side-effect that a remote JWKs source will be polled
exactly one additional time too for errors that have to do with
configuration, or for errors that might be caused by not synched
clocks, forged JWTs, etc. ( These will throw a BadJWTException
which extends BadJOSEException also )
* [ML] Adding support for geo_shape, geo_centroid, geo_point in datafeeds
* only supporting doc_values for geo_point fields
* moving validation into GeoPointField ctor
The retention leases stats is null if the processing shard copy is being
closed. In this the case, we should check against null then retry to
avoid failing a test.
Closes#41237
WriteActionsTests#testBulk and WriteActionsTests#testIndex sometimes
fail with a pending retention lock. We might leak retention locks when
switching to async recovery. However, it's more likely that ongoing
recoveries prevent the retention lock from releasing.
This change increases the waiting time when we check for no pending
retention lock and also ensures no ongoing recovery in
WriteActionsTests.
Closes#41054
Get resources action sorts on the resource id. When there are no resources at
all, then it is possible the index does not contain a mapping for the resource
id field. In that case, the search api fails by default.
This commit adjusts the search request to ignore unmapped fields.
Closeselastic/kibana#37870
Both TransportAnalyzeAction and CategorizationAnalyzer have logic to build
custom analyzers for index-independent analysis. A lot of this code is duplicated,
and it requires the AnalysisRegistry to expose a number of internal provider
classes, as well as making some assumptions about when analysis components are
constructed.
This commit moves the build logic directly into AnalysisRegistry, reducing the
registry's API surface considerably.
* Take into consideration a wider range of Numbers when extracting the
values from source, more specifically - BigInteger and BigDecimal.
(cherry picked from commit 561b8d73dd7b03c50242e4e3f0128b2142959176)
This commit refactors put mapping request validation for reuse. The
concrete case that we are after here is the ability to apply effectively
the same framework to indices aliases requests. This commit refactors
the put mapping request validation framework to allow for that.
Previously, a reindex request had two different size specifications in the body:
* Outer level, determining the maximum documents to process
* Inside the source element, determining the scroll/batch size.
The outer level size has now been renamed to max_docs to
avoid confusion and clarify its semantics, with backwards compatibility and
deprecation warnings for using size.
Similarly, the size parameter has been renamed to max_docs for
update/delete-by-query to keep the 3 interfaces consistent.
Finally, all 3 endpoints now support max_docs in both body and URL.
Relates #24344
Kibana alerting is going to be built using API Keys, and should be
permitted on a basic license.
This commit moves API Keys (but not Tokens) to the Basic license
Relates: elastic/kibana#36836
Backport of: #42787
Currently, when the SSLEngine needs to produce handshake or close data,
we must manually call the nonApplicationWrite method. However, this data
is only required when something triggers the need (starting handshake,
reading from the wire, initiating close, etc). As we have a dedicated
outbound buffer, this data can be produced automatically. Additionally,
with this refactoring, we combine handshake and application mode into a
single mode. This is necessary as there are non-application messages that
are sent post handshake in TLS 1.3. Finally, this commit modifies the
SSLDriver tests to test against TLS 1.3.
A static code analysis revealed that we are not closing
the input stream in the find_file_structure endpoint.
This actually makes no difference in practice, as the
particular InputStream implementation in this case is
org.elasticsearch.common.bytes.BytesReferenceStreamInput
and its close() method is a no-op. However, it is good
practice to close the stream anyway.
This change adds the earliest and latest timestamps into
the field stats for fields of type "date" in the output of
the ML find_file_structure endpoint. This will enable the
cards for date fields in the file data visualizer in the UI
to be made to look more similar to the cards for date
fields in the index data visualizer in the UI.
increases the scheduler interval to fire less frequently, namely changing it from 1s to 10s. The scheduler interval is used for retrying after an error condition.
Adds a metadata field to snapshots which can be used to store arbitrary
key-value information. This may be useful for attaching a description of
why a snapshot was taken, tagging snapshots to make categorization
easier, or identifying the source of automatically-created snapshots.
Some clusters might have been already migrated to version 7 without being warned about the joda-java migration changes.
Deprecation api on that version will give them guidance on what patterns need to be changed.
relates. This change is using the same logic like in 6.8 that is: verifying the pattern is from the incompatible set ('y'-Y', 'C', 'Z' etc), not from predifined set, not prefixed with 8. AND was also created in 6.x. Mappings created in 7.x are considered migrated and should not generate warnings
There is no pipeline check (present on 6.8) as it is impossible to verify when the pipeline was created, and therefore to make sure the format is depracated or not
#42010
Enable audit logs in docker by creating console appenders for audit loggers.
also rename field @timestamp to timestamp and add field type with value audit
The docker build contains now two log4j configuration for oss or default versions. The build now allows override the default configuration.
Also changed the format of a timestamp from ISO8601 to include time zone as per this discussion #36833 (comment)
closes#42666
backport#42671
Dots in the column names cause an error in the ingest
pipeline, as dots are special characters in ingest pipeline.
This PR changes dots into underscores in CSV field names
suggested by the ML find_file_structure endpoint _unless_
the field names are specifically overridden. The reason for
allowing them in overrides is that fields that are not
mentioned in the ingest pipeline can contain dots. But it's
more consistent that the default behaviour is to replace
them all.
Fixeselastic/kibana#26800
This change makes use of the reader attributes added in LUCENE-8671
to ensure that `_id` fields are always on-heap for best update performance
and term dicts are generally off-heap on Read-Only engines.
Closes#38390
This commit adds functionality so that aliases that are manipulated on
leader indices are replicated by the shard follow tasks to the follower
indices. Note that we ignore write indices. This is due to the fact that
follower indices do not receive direct writes so the concept is not
useful.
Relates #41815
This commit fixes the version parsing in various tests. The issue here is that
the parsing was relying on java.version. However, java.version can contain
additional characters such as -ea for early access builds. See JEP 233:
Name Syntax
------------------------------ --------------
java.version $VNUM(\-$PRE)?
java.runtime.version $VSTR
java.vm.version $VSTR
java.specification.version $VNUM
java.vm.specification.version $VNUM
Instead, we want java.specification.version.
This commit adds a configuration guide for the newly introduced
OpenID Connect realm. The guide is similar to the style of the
SAML Guide and shares certain parts where applicable (role mapping)
It also contains a short section on how the realm can be used for
authenticating users without Kibana.
Co-Authored-By: Lisa Cawley <lcawley@elastic.co>
Backport of #41423 and #42555
This commit removes the TLS cluster join validator.
This validator existed to prevent v6.x nodes (which mandated
TLS) from joining an existing cluster of v5.x nodes (which did
not mandate TLS) unless the 6.x node (and by implication the
5.x nodes) was configured to use TLS.
Since 7.x nodes cannot talk to 5.x nodes, this validator is no longer
needed.
Removing the validator solves a problem where single node clusters
that were bound to local interfaces were incorrectly requiring TLS
when they recovered cluster state and joined their own cluster.
Backport of: #42826
Whether security is enabled/disabled is dependent on the combination
of the node settings and the cluster license.
This commit adds a license state listener that logs when the license
change causes security to switch state (or to be initialised).
This is primarily useful for diagnosing cluster formation issues.
Backport of: #42488
If the security index is closed, it should be treated as unavailable
for security purposes.
Prior to 8.0 (or in a mixed cluster) a closed security index has
no routing data, which would cause a NPE in the cluster change
handler, and the index state would not be updated correctly.
This commit fixes that problem
Backport of: #42191
Ensures that fields retained in an enrich index from a source are not contained
under a nested field. It additionally makes sure that key fields exist, and that
value fields are checked if they are present. The policy runner test has also
been expanded with some faulty mapping test cases.
When analysing a semi-structured text file the
find_file_structure endpoint merges lines to form
multi-line messages using the assumption that the
first line in each message contains the timestamp.
However, if the timestamp is misdetected then this
can lead to excessive numbers of lines being merged
to form massive messages.
This commit adds a line_merge_size_limit setting
(default 10000 characters) that halts the analysis
if a message bigger than this is created. This
prevents significant CPU time being spent subsequently
trying to determine the internal structure of the
huge bogus messages.
This change helps to prevent the situation where a binary
file uploaded to the find_file_structure endpoint is
detected as being text in the UTF-16 character set, and
then causes a large amount of CPU to be spent analysing
the bogus text structure.
The approach is to check the distribution of zero bytes
between odd and even file positions, on the grounds that
UTF-16BE or UTF16-LE would have a very skewed distribution.
This commit clones the existing AnalyzeRequest/AnalyzeResponse classes
to the high-level rest client, and adjusts request converters to use these new
classes.
This is a prerequisite to removing the Streamable interface from the internal
server version of these classes.
In AsciiDoc, `subs="attributes,callouts,macros"` options were required
to render `include-tagged::` in a code block.
With elastic/docs#827, Elasticsearch Reference documentation migrated
from AsciiDoc to Asciidoctor.
In Asciidoctor, the `subs="attributes,callouts,macros"` options are no
longer needed to render `include-tagged::` in a code block. This commit
removes those unneeded options.
Resolves#41589
Data frame transforms are restricted by different roles to ML, but
share the ML UI. To prevent the ML UI being hidden for users who
only have the data frame admin or user role, it is necessary to add
the ML Kibana application privilege to the backend data frame roles.
In hamcrest 2.1 warnings for unchecked varargs were fixed by hamcrest using @SafeVarargs for those matchers where this warning occurred.
This PR is aimed to remove these annotations when Matchers.contains ,Matchers.containsInAnyOrder or Matchers.hasItems was used
backport #41528
We had this as a dependency for legacy dependencies that still needed
the Log4j 1.2 API. This appears to no longer be necessary, so this
commit removes this artifact as a dependency.
To remove this dependency, we had to fix a few places where we were
accidentally relying on Log4j 1.2 instead of Log4j 2 (easy to do, since
both APIs were on the compile-time classpath).
Finally, we can remove our custom Netty logger factory. This was needed
when we were on Log4j 1.2 and handled logging in our own unique
way. When we migrated to Log4j 2 we could have dropped this
dependency. However, even then Netty would still pick up Log4j 1.2 since
it was on the classpath, thus the advantage to removing this as a
dependency now.
This commit changes the way token ids are hashed so that the output is
url safe without requiring encoding. This follows the pattern that we
use for document ids that are autogenerated, see UUIDs and the
associated classes for additional details.
This change ensures that:
- We only attempt to refresh the remote JWKS when there is a
signature related error only ( BadJWSException instead of the
geric BadJOSEException )
- We do call OpenIDConnectAuthenticator#getUserClaims upon
successful refresh.
- We test this in OpenIdConnectAuthenticatorTests.
Without this fix, when using the OpenID Connect realm with a remote
JWKSet configured in `op.jwks_path`, the refresh would be triggered
for most configuration errors ( i.e. wrong value for `op.issuer` )
and the kibana wouldn't get a response and timeout since
`getUserClaims` wouldn't be called because
`ReloadableJWKSource#reloadAsync` wouldn't call `onResponse` on the
future.
Test was using ClockMock#rewind passing the amount of nanoseconds
in order to "strip" nanos from the time value. This was intentional
as the expiration time of the UserToken doesn't have nanosecond
precision.
However, ClockMock#rewind doesn't support nanos either, so when it's
called with a TimeValue, it rewinds the clock by the TimeValue's
millis instead. This was causing the clock to go enough millis
before token expiration time and the test was passing. Once every
few hundred times though, the TimeValue by which we attempted to
rewind the clock only had nanos and no millis, so rewind moved the
clock back just a few millis, but still after expiration time.
This change moves the clock explicitly to the same instant as expiration,
using clock.setTime and disregarding nanos.
Refactors the WKT and GeoJSON parsers from an utility class into an
instantiatable objects. This is a preliminary step in
preparation for moving out coordinate validators from Geometry
constructors. This should allow us to make validators plugable.
Add support for components used by processor factories to get updated
before processor factories create new processor instances.
Components can register via `IngestService#addIngestClusterStateListener(...)`
then if the internal representation of ingest pipelines get updated,
these components get updated with the current cluster state before
pipelines are updated.
Registered EnrichProcessorFactory as ingest cluster state listener, so
that it has always an up to date view of the active enrich policies.
testRetentionLeaseIsAddedIfItDisappearsWhileFollowing does not reset the
mock transport service after test. Surviving transport interceptors from
that test can sneaky remove retention leases and make other tests fail.
Closes#39331Closes#39509Closes#41428Closes#41679Closes#41737Closes#41756
* Safer Wait for Snapshot Success in ClusterPrivilegeTests
* The snapshot state returned by the API might become SUCCESS before it's fully removed from the cluster state.
* We should fix this race in the transport API but it's not trivial and will be part of the incoming big round of refactoring the repository interaction, this added check fixes the test for now
* closes#38030
* Some Cleanup in o.e.i.engine
* Remove dead code and parameters
* Reduce visibility in some obvious spots
* Add missing `assert`s (not that important here since the methods
themselves will probably be dead-code eliminated) but still
We need more information to understand why CcrRetentionLeaseIT is
failing. This commit adds some debug log to retention leases and enables
them in CcrRetentionLeaseIT.
This change fixes a race condition that would result in an
in-memory data structure becoming out-of-sync with persistent
tasks in cluster state.
If repeated often enough this could result in it being
impossible to open any ML jobs on the affected node, as the
master node would think the node had capacity to open another
job but the chosen node would error during the open sequence
due to its in-memory data structure being full.
The race could be triggered by opening a job and then closing
it a tiny fraction of a second later. It is unlikely a user
of the UI could open and close the job that fast, but a script
or program calling the REST API could.
The nasty thing is, from the externally observable states and
stats everything would appear to be fine - the fast open then
close sequence would appear to leave the job in the closed
state. It's only later that the leftovers in the in-memory
data structure might build up and cause a problem.
* add support for fixed_interval, calendar_interval, remove interval
* adapt HLRC
* checkstyle
* add a hlrc to server test
* adapt yml test
* improve naming and doc
* improve interface and add test code for hlrc to server
* address review comments
* repair merge conflict
* fix date patterns
* address review comments
* remove assert for warning
* improve exception message
* use constants
This change contains a major refactoring of the timestamp
format determination code used by the ML find file structure
endpoint.
Previously timestamp format determination was done separately
for each piece of text supplied to the timestamp format finder.
This had the drawback that it was not possible to distinguish
dd/MM and MM/dd in the case where both numbers were 12 or less.
In order to do this sensibly it is best to look across all the
available timestamps and see if one of the numbers is greater
than 12 in any of them. This necessitates making the timestamp
format finder an instantiable class that can accumulate evidence
over time.
Another problem with the previous approach was that it was only
possible to override the timestamp format to one of a limited
set of timestamp formats. There was no way out if a file to be
analysed had a timestamp that was sane yet not in the supported
set. This is now changed to allow any timestamp format that can
be parsed by a combination of these Java date/time formats:
yy, yyyy, M, MM, MMM, MMMM, d, dd, EEE, EEEE, H, HH, h, mm, ss,
a, XX, XXX, zzz
Additionally S letter groups (fractional seconds) are supported
providing they occur after ss and separated from the ss by a dot,
comma or colon. Spacing and punctuation is also permitted with
the exception of the question mark, newline and carriage return
characters, together with literal text enclosed in single quotes.
The full list of changes/improvements in this refactor is:
- Make TimestampFormatFinder an instantiable class
- Overrides must be specified in Java date/time format - Joda
format is no longer accepted
- Joda timestamp formats in outputs are now derived from the
determined or overridden Java timestamp formats, not stored
separately
- Functionality for determining the "best" timestamp format in
a set of lines has been moved from TextLogFileStructureFinder
to TimestampFormatFinder, taking advantage of the fact that
TimestampFormatFinder is now an instantiable class with state
- The functionality to quickly rule out some possible Grok
patterns when looking for timestamp formats has been changed
from using simple regular expressions to the much faster
approach of using the Shift-And method of sub-string search,
but using an "alphabet" consisting of just 1 (representing any
digit) and 0 (representing non-digits)
- Timestamp format overrides are now much more flexible
- Timestamp format overrides that do not correspond to a built-in
Grok pattern are mapped to a %{CUSTOM_TIMESTAMP} Grok pattern
whose definition is included within the date processor in the
ingest pipeline
- Grok patterns that correspond to multiple Java date/time
patterns are now handled better - the Grok pattern is accepted
as matching broadly, and the required set of Java date/time
patterns is built up considering all observed samples
- As a result of the more flexible acceptance of Grok patterns,
when looking for the "best" timestamp in a set of lines
timestamps are considered different if they are preceded by
a different sequence of punctuation characters (to prevent
timestamps far into some lines being considered similar to
timestamps near the beginning of other lines)
- Out-of-the-box Grok patterns that are considered now include
%{DATE} and %{DATESTAMP}, which have indeterminate day/month
ordering
- The order of day/month in formats with indeterminate day/month
order is determined by considering all observed samples (plus
the server locale if the observed samples still do not suggest
an ordering)
Relates #38086Closes#35137Closes#35132
As part of #30241 realm settings were changed to be true affix
settings. In the process of this change, the "ssl." prefix was lost
from the realm truststore password. It should be:
xpack.security.authc.realms.<type>.<name>.ssl.truststore.password
Due to a mismatch between the way we define SSL settings and load SSL
contexts, there was no way to define this legacy password setting in a
realm config.
The settings validation would reject "ssl.truststore.password" but the
SSL service would ignore "truststore.password"
Backport of: #42336
This commit makes creators of GetField split the fields into document fields and metadata fields. It is part of larger refactoring that aims to remove the calls to static methods of MapperService related to metadata fields, as discussed in #24422.
Allow querying of FROZEN indices both through dedicated SQL grammar
extension:
> SELECT field FROM FROZEN index
and also through driver configuration parameter, namely:
> index.include.frozen: true/false
Fix#39390Fix#39377
(cherry picked from commit 2445a933915f420c7f51e8505afa0a7978ce6b0f)
When asserting on the checkpoint value if the DF has completed the checkpoint will be 1 else 0.
Similarly state may be started or indexing. Closes#42309
ShardId already implements Writeable so there is no need for it to implement Streamable too. Also the readShardId static method can be
easily replaced with direct usages of the constructor that takes a
StreamInput as argument.
* Remove IndexShard dependency from Repository
In order to simplify repository testing especially for BlobStoreRepository
it's important to remove the dependency on IndexShard and reduce it to
Store and MapperService (in the snapshot case). This significantly reduces
the dependcy footprint for Repository and allows unittesting without starting
nodes or instantiate entire shard instances. This change deprecates the old
method signatures and adds a unittest for FileRepository to show the advantage
of this change.
In addition, the unittesting surfaced a bug where the internal file names that
are private to the repository were used in the recovery stats instead of the
target file names which makes it impossible to relate to the actual lucene files
in the recovery stats.
* don't delegate deprecated methods
* apply comments
* test
rp.client_secret is a required secure setting. Make sure we fail with
a SettingsException and a clear, actionable message when building
the realm, if the setting is missing.
Enhance the handling of merging the claims sets of the
ID Token and the UserInfo response. JsonObject#merge would throw a
runtime exception when attempting to merge two objects with the
same key and different values. This could happen for an OP that
returns different vales for the same claim in the ID Token and the
UserInfo response ( Google does that for profile claim ).
If a claim is contained in both sets, we attempt to merge the
values if they are objects or arrays, otherwise the ID Token claim
value takes presedence and overwrites the userinfo response.
This adds the node name where we fail to start a process via the native
controller to facilitate debugging as otherwise it might not be known
to which node the job was allocated.
Moves the test infrastructure away from using node.max_local_storage_nodes, allowing us in a
follow-up PR to deprecate this setting in 7.x and to remove it in 8.0.
This also changes the behavior of InternalTestCluster so that starting up nodes will not automatically
reuse data folders of previously stopped nodes. If this behavior is desired, it needs to be explicitly
done by passing the data path from the stopped node to the new node that is started.
SHA256 was recently added to the Hasher class in order to be used
in the TokenService. A few tests were still using values() to get
the available algorithms from the Enum and it could happen that
SHA256 would be picked up by these.
This change adds an extra convenience method
(Hasher#getAvailableAlgoCacheHash) and enures that only this and
Hasher#getAvailableAlgoStoredHash are used for getting the list of
available password hashing algorithms in our tests.
This performs a simple restart test to move a basic licensed
cluster from no security (the default) to security & transport TLS
enabled.
Backport of: #41933
Re-enable muted tests and accommodate recent backend changes
that result in higher memory usage being reported for a job
at the start of its life-cycle
This corrects what appears to have been a copy-paste error
where the logger for `MachineLearning` and `DataFrame` was wrongly
set to be that of `XPackPlugin`.
If there are no realms that depend on the native role mapping store,
then changes should it should not perform any cache refresh.
A refresh with an empty realm array will refresh all realms.
This also fixes a spurious log warning that could occur if the
role mapping store was notified that the security index was recovered
before any realm were attached.
Backport of: #42169
Rollup jobs can define how long they should wait before rolling up new documents.
However if the delay is smaller or if it's not a multiple of the rollup interval
the job can create incomplete buckets because the max boundary for a job is computed
from the time when the job started rounded to the interval minus the delay. This change
fixes this computation by applying the delay substraction before the rounding in order to ensure
that we never create a boundary that falls in a middle of a bucket.
The date_histogram accepts an interval which can be either a calendar
interval (DST-aware, leap seconds, arbitrary length of months, etc) or
fixed interval (strict multiples of SI units). Unfortunately this is inferred
by first trying to parse as a calendar interval, then falling back to fixed
if that fails.
This leads to confusing arrangement where `1d` == calendar, but
`2d` == fixed. And if you want a day of fixed time, you have to
specify `24h` (e.g. the next smallest unit). This arrangement is very
error-prone for users.
This PR adds `calendar_interval` and `fixed_interval` parameters to any
code that uses intervals (date_histogram, rollup, composite, datafeed, etc).
Calendar only accepts calendar intervals, fixed accepts any combination of
units (meaning `1d` can be used to specify `24h` in fixed time), and both
are mutually exclusive.
The old interval behavior is deprecated and will throw a deprecation warning.
It is also mutually exclusive with the two new parameters. In the future the
old dual-purpose interval will be removed.
The change applies to both REST and java clients.
This commit changes how access tokens and refresh tokens are stored
in the tokens index.
Access token values are now hashed before being stored in the id
field of the `user_token` and before becoming part of the token
document id. Refresh token values are hashed before being stored
in the token field of the `refresh_token`. The tokens are hashed
without a salt value since these are v4 UUID values that have
enough entropy themselves. Both rainbow table attacks and offline
brute force attacks are impractical.
As a side effect of this change and in order to support multiple
concurrent refreshes as introduced in #39631, upon refreshing an
<access token, refresh token> pair, the superseding access token
and refresh tokens values are stored in the superseded token doc,
encrypted with a key that is derived from the superseded refresh
token. As such, subsequent requests to refresh the same token in
the predefined time window will return the same superseding access
token and refresh token values, without hitting the tokens index
(as this only stores hashes of the token values). AES in GCM
mode is used for encrypting the token values and the key
derivation from the superseded refresh token uses a small number
of iterations as it needs to be quick.
For backwards compatibility reasons, the new behavior is only
enabled when all nodes in a cluster are in the required version
so that old nodes can cope with the token values in a mixed
cluster during a rolling upgrade.
This commit updates the default ciphers and TLS protocols that are used
when the runtime JDK supports them. New cipher support has been
introduced in JDK 11 and 12 along with performance fixes for AES GCM.
The ciphers are ordered with PFS ciphers being most preferred, then
AEAD ciphers, and finally those with mainstream hardware support. When
available stronger encryption is preferred for a given cipher.
This is a backport of #41385 and #41808. There are known JDK bugs with
TLSv1.3 that have been fixed in various versions. These are:
1. The JDK's bundled HttpsServer will endless loop under JDK11 and JDK
12.0 (Fixed in 12.0.1) based on the way the Apache HttpClient performs
a close (half close).
2. In all versions of JDK 11 and 12, the HttpsServer will endless loop
when certificates are not trusted or another handshake error occurs. An
email has been sent to the openjdk security-dev list and #38646 is open
to track this.
3. In JDK 11.0.2 and prior there is a race condition with session
resumption that leads to handshake errors when multiple concurrent
handshakes are going on between the same client and server. This bug
does not appear when client authentication is in use. This is
JDK-8213202, which was fixed in 11.0.3 and 12.0.
4. In JDK 11.0.2 and prior there is a bug where resumed TLS sessions do
not retain peer certificate information. This is JDK-8212885.
The way these issues are addressed is that the current java version is
checked and used to determine the supported protocols for tests that
provoke these issues.
Muting a number of AutoDetectMemoryLimitIT tests to give CI a chance to
settle before easing in required backend changes.
relates elastic/ml-cpp#486
relates #42086
Improve the hard_limit memory audit message by reporting how many bytes
over the configured memory limit the job was at the point of the last
allocation failure.
Previously the model memory usage was reported, however this was
inaccurate and hence of limited use - primarily because the total
memory used by the model can decrease significantly after the models
status is changed to hard_limit but before the model size stats are
reported from autodetect to ES.
While this PR contains the changes to the format of the hard_limit audit
message it is dependent on modifications to the ml-cpp backend to
send additional data fields in the model size stats message. These
changes will follow in a subsequent PR. It is worth noting that this PR
must be merged prior to the ml-cpp one, to keep CI tests happy.
Due to a bug in JTS WKT parser, JTS cannot parse most of WKT shapes if
the shape type is written in the lower case. For examples `point (1 2)`
is causing JTS inside H2GIS to fail on tr-TR locale as a result of
case-insensitive comparison.
This change replaces the extremely unfriendly message
"Number of messages analyzed must be positive" in the
case where the sample lines were incorrectly grouped
into just one message to an error that more helpfully
explains the likely root cause of the problem.
The migrate tool was added when the native realm was created, to aid
users in converting from file realms that were per node, into the
cluster managed native realm. While this tool was useful at the time,
users should now be using the native realm directly. This commit
deprecates the tool, to be removed in a followup for 8.0.
Interval * integer number is a valid operation which previously was
only supported for foldables (literals) and not when a field was
involved. That was because:
1. There was no common type returned for that combination
2. The `BinaryArithmeticOperation` was permitting the multiplication
(called by fold()) but the BinaryArithmeticProcessor didn't allow it
Moreover the error message for invalid arithmetic operations was wrong
because of the issue with the overloading methods of
`LoggerMessageFormat.format`.
Fixes: #41239Fixes: #41200
(cherry picked from commit 91039bab12d3ef27d6eac9cdc891a3b3ad0c694d)
If a basic license enables security, then we should also enforce TLS
on the transport interface.
This was already the case for Standard/Gold/Platinum licenses.
For Basic, security defaults to disabled, so some of the process
around checking whether security is actuallY enabled is more complex
now that we need to account for basic licenses.
Adds an initial limited implementations of geo features to SQL. This implementation is based on the [OpenGIS® Implementation Standard for Geographic information - Simple feature access](http://www.opengeospatial.org/standards/sfs), which is the current standard for GIS system implementation. This effort is concentrate on SQL option AKA ISO 19125-2.
Queries that are supported as a result of this initial implementation
Metadata commands
- `DESCRIBE table` - returns the correct column types `GEOMETRY` for geo shapes and geo points.
- `SHOW FUNCTIONS` - returns a list that includes supported `ST_` functions
- `SYS TYPES` and `SYS COLUMNS` display correct types `GEO_SHAPE` and `GEO_POINT` for geo shapes and geo points accordingly.
Returning geoshapes and geopoints from elasticsearch
- `SELECT geom FROM table` - returns the geoshapes and geo_points as libs/geo objects in JDBC or as WKT strings in console.
- `SELECT ST_AsWKT(geom) FROM table;` and `SELECT ST_AsText(geom) FROM table;`- returns the geoshapes ang geopoints in their WKT representation;
Using geopoints to elasticsearch
- The following functions will be supported for geopoints in queries, sorting and aggregations: `ST_GeomFromText`, `ST_X`, `ST_Y`, `ST_Z`, `ST_GeometryType`, and `ST_Distance`. In most cases when used in queries, sorting and aggregations, these function are translated into script. These functions can be used in the SELECT clause for both geopoints and geoshapes.
- `SELECT * FROM table WHERE ST_Distance(ST_GeomFromText(POINT(1 2), point) < 10;` - returns all records for which `point` is located within 10m from the `POINT(1 2)`. In this case the WHERE clause is translated into a range query.
Limitations:
Geoshapes cannot be used in queries, sorting and aggregations as part of this initial effort. In order to fully take advantage of geoshapes we would need to have access to geoshape doc values, which is coming in #37206. `ST_Z` cannot be used on geopoints in queries, sorting and aggregations since we don't store altitude in geo_point doc values.
Relates to #29872
Backport of #42031
The `toStepKeys()` method was only called in its own test case. The real
list of StepKeys that's used in action execution is generated from the
list of actual step objects returned by `toSteps()`.
This commit removes that method.
* [ML] adding pivot.size option for setting paging size
* Changing field name to address PR comments
* fixing ctor usage
* adjust hlrc for field name change
* [ML] properly nesting objects in document source
* Throw exception on agg extraction failure, cause it to fail df
* throwing error to stop df if unsupported agg is found
Previously, TransportSingleShardAction required constructing a new
empty response object. This response object's Streamable readFrom
was used. As part of the migration to Writeable, the interface here
was updated to leverage Writeable.Reader.
relates to #34389.
The enrich key field is being kept track in _meta field by the policy runner.
The ingest processor uses the field name defined in enrich index _meta field and
not in the policy. This will avoid problems if policy is changed without
a new enrich index being created.
This also complete decouples EnrichPolicy from ExactMatchProcessor.
The following scenario results in failure without this change:
1) Create policy
2) Execute policy
3) Create pipeline with enrich processor
4) Use pipeline
5) Update enrich key in policy
6) Use pipeline, which then fails.
- msearch exceptions should be thrown directly instead of wrapping
in a RuntimeException
- Do not allow partial results (where some indices are missing),
instead throw an exception if any index is missing
Direct the task request to the node executing the task and also refactor the task responses
so all errors are returned and set the HTTP status code based on presence of errors.
testclusters detect from settings that security is enabled
if a user is not specified using the DSL introduced in this PR, a default one is created
the appropriate wait conditions are used authenticating with the first user defined in the DSL ( or the default user ).
an example DSL to create a user is user username:"test_user" password:"x-pack-test-password" role: "superuser" all keys are optional and default to the values shown in this example
These tests are failing somewhat mysteriously, indicating that when we
renew retention leaess during a restore that our retention leases that
we added before starting the restore suddenly do not exist. To make
sense of this, this commit enables trace logging.
The CircuitBreaker was introduced as means of preventing a
`StackOverflowException` during the build of the AST by the parser.
The ANTLR4 grammar causes a weird behaviour for a Parser Listener.
The `enterEveryRule()` method is often called with a different parsing
context than the respective `exitEveryRule()`. This makes it difficult
to keep track of the tree's depth, and a custom Map was used as an
attempt of matching the contextes as they are encounter during `enter`
and during `exit` of the rules.
This approach had 2 important drawbacks:
1. It's hard to maintain this custom Map as the grammar changes.
2. The CircuitBreaker could often lead to false positives which caused
valid queries to return an Exception and prevent them from executing.
So, this removes completely the CircuitBreaker which is replaced be
a simple handling of the `StackOverflowException`
Fixes: #41471
(cherry picked from commit 1559a8e2dbd729138b52e89b7e80264c9f4ad1e7)
Reindex uses scroll searches to read the source data. It is more efficient
to read more data in one search scroll round then several. I think 10000
is a good sweet spot.
Relates to #32789
its own helper method to determine alias / policy base name.
This way both the enrich processor and policy runner use the same logic
to determine the alias to use.
Relates to #32789
Because realms are configured at node startup, but license levels can
change dynamically, it is possible to have a running node that has a
particular realm type configured, but that realm is not permitted under
the current license.
In this case the realm is silently ignored during authentication.
This commit adds a warning in the elasticsearch logs if authentication
fails, and there are realms that have been skipped due to licensing.
This message is not intended to imply that the realms could (or would)
have successfully authenticated the user, but they may help reduce
confusion about why authentication failed if the caller was expecting
the authentication to be handled by a particular realm that is in fact
unlicensed.
Backport of: #41778
The run task is supposed to run elasticsearch with the given plugin or
module. However, for modules, this is most realistic if using the full
distribution. This commit changes the run setup to use the default or
oss as appropriate.
This is related to #27260. Currently we have a single read buffer that
is no larger than a single TLS packet. This prevents us from reading
multiple TLS packets in a single socket read call. This commit modifies
our TLS work to support reading similar to the plaintext case. The data
will be copied to a (potentially) recycled TLS packet-sized buffer for
interaction with the SSLEngine.
Backports #41088
Adds the foundation of the execution logic to execute an enrich policy. Validates
the source index existence as well as mappings, creates a new enrich index for
the policy, reindexes the source index into the new enrich index, and swaps the
enrich alias for the policy to the new index.
When applying a license update, we provide "acknowledgement messages"
that indicate which features will be affected by the change in license.
This commit updates the messages that are provided when installing a
basic license, so that they reflect the changes made to the security
features that are included in that license type.
Backport of: #41776
This switches the strategy used to download machine learning artifacts
from a manual download through S3 to using an Ivy repository on top of
S3. This gives us all the benefits of Gradle dependency resolution
including local caching.
With this change, we will verify the consistency of version and source
(besides id, seq_no, and term) of live documents between shard copies
at the end of disruption tests.
This commit is a refactoring of how we filter addresses on
interfaces. In particular, we refactor all of these methods into a
common private method. We also change the order of logic to first check
if an address matches our filter and then check if the interface is
up. This is to possibly avoid problems we are seeing where devices are
flapping up and down while we are checking for loopback addresses. We do
not expect the loopback device to flap up and down so by reversing the
logic here we avoid that problem on CI machines. Finally, we expand the
error message when this does occur so that we know which device is
flapping.
This is related to #27260. Currently there is a setting
http.read_timeout that allows users to define a read timeout for the
http transport. This commit implements support for this functionality
with the transport-nio plugin. The behavior here is that a repeating
task will be scheduled for the interval defined. If there have been
no requests received since the last run and there are no inflight
requests, the channel will be closed.
* [ML] Refactor NativeStorageProvider to enable reuse
Moves `NativeStorageProvider` as a machine learning component
so that it can be reused for other job types. Also, we now
pass the persistent task description as unique identifier which
avoids conflicts between jobs of different type but with same ids.
* Adding nativeStorageProvider as component
Since `TransportForecastJobAction` is expected to get injected a `NativeStorageProvider` class, we need to make sure that it is a constructed component, as it does not have a zero parametered, public ctor.
This is modelled on the qa test for TLS on basic.
It starts a cluster on basic with security & performs a number of
security related checks.
It also performs those same checks on a trial license.
This adds support for using security on a basic license.
It includes:
- AllowedRealmType.NATIVE realms (reserved, native, file)
- Roles / RBAC
- TLS (already supported)
It does not support:
- Audit
- IP filters
- Token Service & API Keys
- Advanced realms (AD, LDAP, SAML, etc)
- Advanced roles (DLS, FLS)
- Pluggable security
As with trial licences, security is disabled by default.
This commit does not include any new automated tests, but existing tests have been updated.
This commit introduces the `.security-tokens` and `.security-tokens-7`
alias-index pair. Because index snapshotting is at the index level granularity
(ie you cannot snapshot a subset of an index) snapshoting .`security` had
the undesirable effect of storing ephemeral security tokens. The changes
herein address this issue by moving tokens "seamlessly" (without user
intervention) to another index, so that a "Security Backup" (ie snapshot of
`.security`) would not be bloated by ephemeral data.
Today we allow adding entries from a file or from a string, yet we
internally maintain this distinction such that if you try to add a value
from a file for a setting that expects a string or add a value from a
string for a setting that expects a file, you will have a bad time. This
causes a pain for operators such that for each setting they need to know
this difference. Yet, we do not need to maintain this distinction
internally as they are bytes after all. This commit removes that
distinction and includes logic to upgrade legacy keystores.
This commit removes the usage of the `BulkProcessor` to write history documents
and delete triggered watches on a `EsRejectedExecutionException`. Since the
exception could be handled on the write thread, the write thread can be blocked
waiting on watcher threads (due to a synchronous method). This is problematic
since those watcher threads can be blocked waiting on write threads.
This commit also moves the handling of the exception to the generic threadpool
to avoid submitting write requests from the write thread pool.
fixes#41390
Today we choose to initialize max_seq_no_of_updates on primaries only so
we can deal with a situation where a primary is on an old node (before
6.5) which does not have MUS while replicas on new nodes (6.5+).
However, this strategy is quite complex and can lead to bugs (for
example #40249) since we have to assign a correct value (not too low) to
MSU in all possible situations (before recovering from translog,
restoring history on promotion, and handing off relocation).
Fortunately, we don't have to deal with this BWC in 7.0+ since all nodes
in the cluster should have MSU. This change simplifies the
initialization of MSU by always assigning it a correct value in the
constructor of Engine regardless of whether it's a replica or primary.
Relates #33842
The enrich processor performs a lookup in a locally allocated
enrich index shard using a field value from the document being enriched.
If there is a match then the _source of the enrich document is fetched.
The document being enriched then gets the decorate values from the
enrich document based on the configured decorate fields in the pipeline.
Note that the usage of the _source field is temporary until the enrich
source field that is part of #41521 is merged into the enrich branch.
Using the _source field involves significant decompression which not
desired for enrich use cases.
The policy contains the information what field in the enrich index
to query and what fields are available to decorate a document being
enriched with.
The enrich processor has the following configuration options:
* `policy_name` - the name of the policy this processor should use
* `enrich_key` - the field in the document being enriched that holds to lookup value
* `ignore_missing` - Whether to allow the key field to be missing
* `enrich_values` - a list of fields to decorate the document being enriched with.
Each entry holds a source field and a target field.
The source field indicates what decorate field to use that is available in the policy.
The target field controls the field name to use in the document being enriched.
The source and target fields can be the same.
Example pipeline config:
```
{
"processors": [
{
"policy_name": "my_policy",
"enrich_key": "host_name",
"enrich_values": [
{
"source": "globalRank",
"target": "global_rank"
}
]
}
]
}
```
In the above example documents are being enriched with a global rank value.
For each document that has match in the enrich index based on its host_name field,
the document gets an global rank field value, which is fetched from the `globalRank`
field in the enrich index and saved as `global_rank` in the document being enriched.
This is PR is part one of #41521
This is related to #27260. Currently for the SSLDriver we allocate a
dedicated network write buffer and encrypt the data into that buffer one
buffer at a time. This requires constantly switching between encrypting
and flushing. This commit adds a dedicated outbound buffer for SSL
operations that will internally allocate new packet sized buffers as
they are need (for writing encrypted data). This allows us to totally
encrypt an operation before writing it to the network. Eventually it can
be hooked up to buffer recycling.
This commit also backports the following commit:
Handle WRAP ops during SSL read
It is possible that a WRAP operation can occur while decrypting
handshake data in TLS 1.3. The SSLDriver does not currently handle this
well as it does not have access to the outbound buffer during read call.
This commit moves the buffer into the Driver to fix this issue. Data
wrapped during a read call will be queued for writing after the read
call is complete.
move put policy api yaml test to this rest module.
The main benefit is that all tests will then be run when running:
`./gradlew -p x-pack/plugin/enrich check`
The rest qa module starts a node with default distribution and basic
license.
This qa module will also be used for adding different rest tests (not yaml),
for example rest tests needed for #41532
Also when we are going to work on security integration then we can
add a security qa module under the qa folder. Also at some point
we should add a multi node qa module.
Andrei Stefan
Alpar Torok
Przemysław Witek
David Roberts
Yogesh Gaikwad
Lisa Cawley
Ioannis Kakavas
Lee Hinman
Benjamin Trent
Dimitris Athanasiou
Yannick Welsch
Henning Andersen
Michael Basnight
Albert Zaharovits
Marios Trivyzas
Armin Braun
emasab
Martijn van Groningen
Jason Tedor
Rory Hunter
Nhat Nguyen
James Rodewig
Andrei Dan
Costin Leau
Igor Motov
Tanguy Leroux
Jim Ferenczi
Gordon Brown
Christoph Büscher
Hendrik Muhs
James Baiera
Albert Zaharovits
Lee Hinman
Julie Tibshirani
Oliver Gupte
Tomas Della Vedova
Luca Cavanna
Zachary Tong
Ryan Ernst
Tim Vernum
Aleh Zasypkin
Andrey Ershov
Ignacio Vera
markharwood
Alexander Reelsen
Simon Willnauer
Tal Levy
Mark Tozzi
Jake Landis
William Brafford
David Kyle
Nick Knize
Mayya Sharipova
Mark Vieira
Przemyslaw Gomulka
Tom Callahan
Tim Brooks
Alison Goryachev
David Turner
marcos ramos
Sachin Frayne
Alan Woodward
Jay Modi
Christos Soulios
Martijn Laarman
Ryan Ernst
jalvar08
henryptung
Chris Cho
Daniel Mitterdorfer
Costin Leau
Jim Ferenczi
Mengwei Ding
Ed Savage
Ed Savage
Zachary Tong
Alpar Torok
Hicham Mallah
Ioannis Kakavas
Tom Veasey
Chris Earle