Factor rounding and Interval rounding (the non-date based rounding)
was no longer used so it has been removed. Offset rounding has been
retained for no since both date based rounding classes rely on it
This change does three things:
1. Makes PreBuiltTransportClientTests run since it was silently
failing on a missing dependency
2. Makes PreBuiltTransportClientTests pass
3. Removes the http.type and transport.type from being set in the
transport clients additional settings since these are set to `netty4` by
default anyway.
Fixes an issue where a node that receives a cluster state
update with a brand new cluster UUID but without an
initial persistence block could cause indices to be wiped out,
preventing them from being reimported as dangling indices.
This commit only removes the in-memory data structures and
thus, are subsequently reimported as dangling indices.
A primary shard currently instructs the master to fail a replica shard that it fails to replicate writes to before acknowledging the writes to the client. To ensure that the primary instructing the master to fail the replica is still the current primary in the cluster state on the master, it submits not only the identity of the replica shard to fail to the master but also its own shard identity. This can be problematic however when the primary is relocating. After primary relocation handoff but before the primary relocation target is activated, the primary relocation target is replicating writes through the authority of the primary relocation source. This means that the primary relocation target should probably send the identity of the primary relocation source as authority. However, this is not good enough either, as primary shard activation and shard failure instructions can arrive out-of-order. This means that the relocation target would have to send both relocation source and target identity as authority. Fortunately, there is another concept in the cluster state that represents this joint authority, namely primary terms. The primary term is only increased on initial assignment or when a replica is promoted. It stays the same however when a primary relocates.
This commit changes ShardStateAction to rely on primary terms for shard authority. It also changes the wire format to only transmit ShardId and allocation id of the shard to fail (instead of the full ShardRouting), so that the same action can be used in a subsequent PR to remove allocation ids from the active allocation set for which there exist no ShardRouting in the cluster anymore. Last but not least, this commit also makes AllocationService less lenient, requiring ShardRouting instances that are passed to its applyStartedShards and applyFailedShards methods to exist in the routing table. ShardStateAction, which is calling these methods, now has the responsibility to resolve the ShardRouting objects that are to be started / failed, and remove duplicates.
Today, when listing thread pools via the cat thread pool API, thread
pools are listed in a column-delimited format. This is unfriendly to
command-line tools, and inconsistent with other cat APIs. Instead,
thread pools should be listed in a row-delimited format.
Additionally, the cat thread pool API is limited to a fixed list of
thread pools that excludes certain built-in thread pools as well as all
custom thread pools. These thread pools should be available via the cat
thread pool API.
This commit improves the cat thread pool API by listing all thread pools
(built-in or custom), and by listing them in a row-delimited
format. Finally, for each node, the output thread pools are sorted by
thread pool name.
Relates #19721
Our parsing code accepted up until now queries in the following form (note that the query starts with `[`:
```
{
"bool" : [
{
"must" : []
}
]
}
```
This would lead to a null pointer exception as most parsers assume that the field name ("must" in this example) is the first thing that can be found in a query if its json is valid, hence always non null while parsing. Truth is that the additional array layer doesn't make the json invalid, hence the following code fragment would cause NPE within ParseField, because null gets passed to `parseContext.isDeprecatedSetting`:
```
if (token == XContentParser.Token.FIELD_NAME) {
currentFieldName = parser.currentName();
} else if (parseContext.isDeprecatedSetting(currentFieldName)) {
// skip
} else if (token == XContentParser.Token.START_OBJECT) {
```
We could add null checks in each of our parsers in lots of places, but we rely on `currentFieldName` being non null in all of our parsers, and we should consider it a bug when these unexpected situations are not caught explicitly. It would be best to find a way to prevent such queries altogether without changing all of our parsers.
The reason why such a query goes through is that we've been allowing a query to start with either `[` or `{`. The only reason I found is that we accept `match_all : []`. This seems like an undocumented corner case that we could drop support for. Then we can be stricter and accept only `{` as start token of a query. That way the only next token that the parser can encounter if the json is valid (otherwise the json parser would barf earlier) is actually a field_name, hence the assumption that all our parser makes hold.
The downside of this is simply dropping support for `match_all : []`
Relates to #12887
We just overwrite `toString()` method so it calls toXContent
with `group_by` = "whatever" so we don't try to group by nodes
which does not make sense in a toString() method.
We keep the old behavior for `toXContent()` method which
means that there is no impact in the REST layer but
only in logs and tests (where we call `toString()`).
Closes#19772.
Currently both aggregations really share the same implementation. This commit
splits the implementations so that regular histograms can support decimal
intervals/offsets and compute correct buckets for negative decimal values.
However the response API is still the same. So for intance both regular
histograms and date histograms will produce an
`org.elasticsearch.search.aggregations.bucket.histogram.Histogram`
aggregation.
The optimization to compute an identifier of the rounded value and the
rounded value itself has been removed since it was only used by regular
histograms, which now do the rounding themselves instead of relying on the
Rounding abstraction.
Closes#8082Closes#4847
In several places in our code we need to get a consistent list of files + metadata of the current index. We currently have a couple of ways to do in the `Store` class, which also does the right things and tries to verify the integrity of the smaller files. Sadly, those methods can run into trouble if anyone writes into the folder while they are busy. Most notably, the index shard's engine decides to commit half way and remove a `segment_N` file before the store got to checksum (but did already list it). This race condition typically doesn't happen as almost all of the places where we list files also happen to be places where the relevant shard doesn't yet have an engine. There is however an exception (of course :)) which is the API to list shard stores, used by the master when it is looking for shard copies to assign to.
I already took one shot at fixing this in #19416 , but it turns out not to be enough - see for example https://elasticsearch-ci.elastic.co/job/elastic+elasticsearch+master+multijob-os-compatibility/os=sles/822.
The first inclination to fix this was to add more locking to the different Store methods and acquire the `IndexWriter` lock, thus preventing any engine for accessing if if the a shard is offline and use the current index commit snapshotting logic already existing in `IndexShard` for when the engine is started. That turned out to be a bad idea as we create more subtleties where, for example, a store listing can prevent a shard from starting up (the writer lock doesn't wait if it can't get access, but fails immediately, which is good). Another example is running on a shared directory where some other engine may actually hold the lock.
Instead I decided to take another approach:
1) Remove all the various methods on store and keep one, which accepts an index commit (which can be null) and also clearly communicates that the *caller* is responsible for concurrent access. This also tightens up the API which is a plus.
2) Add a `snapshotStore` method to IndexShard that takes care of all the concurrency aspects with the engine, which is now possible because it's all in the same place. It's still a bit ugly but at least it's all in one place and we can evaluate how to improve on this later on. I also renamed the `snapshotIndex` method to `acquireIndexCommit` to avoid confusion and I think it communicates better what it does.
In 2.0, the ability to specify metadata fields like _routing and _ttl
inside a document was removed. However, the ability to break through
this restriction has lingered, and the check that enforced it is
completely broken.
This change fixes the check, and adds a parsing test.
Currently any code that wants to added NamedWriteables to the
NamedWriteableRegistry can do so via guice injection of the registry,
and registering at construction time. However, this makes the registry
complex: it has both get and register methods synchronized, and there is
likely contention on the read side from multiple threads. The
registration has mostly already been contained to guice modules at node
construction time.
This change makes the registry immutable, taking all of the
NamedWriteable readers at construction time. It also allows plugins to
added arbitrary named writables that it may use in its own transport
actions.
ActiveShardCount.ALL by checking for active shards,
not just started shards, as a shard could be active
but in the relocating state (i.e. not in the started
state).
conform with the requirements of the writeBlob method by
throwing a FileAlreadyExistsException if attempting to write
to a blob that already exists. This change means implementations
of BlobContainer should never overwrite blobs - to overwrite a
blob, it must first be deleted and then can be written again.
Closes#15579
With this commit we add documentation and additional checks to
enforce the cancellation policy of CancellableThreads (which is
disallow `Thread#interrupt()` on any of the threads managed by
it).
If the uuidBytes and ref are converted to utf8, it's possible they can
trip an assertion related to valid UTF-8/UTF-16 ranges, so display them
as hex, not as strings.
method to determine if a write consistency check should be performed
before proceeding with the action. This commit removes this method from
the transport replication actions in favor of setting the ActiveShardCount
on the request, with setting the value to ActiveShardCount.NONE if the
transport action's checkWriteConsistency() method returned false.
After #13834 many tests that used Groovy scripts (for good or bad reason) in their tests have been moved in the lang-groovy module and the issue #13837 has been created to track these messy tests in order to clean them up.
The work started with #19280, #19302 and #19336 and this PR moves the remaining messy tests back in core, removes the dependency on Groovy, changes the scripts in order to use the mocked script engine, and change the tests to integration tests.
It also moves IndexLookupIT test back (even if it has good chance to be removed soon) and fixes its tests.
It also changes AbstractQueryTestCase to use custom script plugins in tests.
closes#13837
* Rename operation to result and reworking responses
* Rename DocWriteResponse.Operation enum to DocWriteResponse.Result
These are just easier to interpret names.
Closes#19664
During our master elections, nodes "vote" for a master being issuing a join request to it. Since this is done in an async fashion, joins may arrive before the master itself has realized it had won the election. Therefore we start accumulating node joins on every node at election start (we don't know the result yet). When the election finish nodes that did not become the master (i.e., joined another node which won the election) need to potentially process and fail any incoming join request they may have received during the election. This is currently achieved by always issuing a cluster state update task that is doomed to fail, even if no pending joins are actually there. That aspect results in confusing (debug) log messages, making it seems like something is wrong. For example (note that `NotMasterException`)
```
[2016-07-30 22:25:53,040][DEBUG][cluster.service ] [node_t1] processing [zen-disco-process-pending-joins [{node_t0}{4SqBTyYNQ82J9c75Cs7jtg}{kutaNSYbTZCSybvqczgWCA}{127.0.0.1}{127.0.0.1:9400} elected]]: execute
[2016-07-30 22:25:53,041][DEBUG][transport ] [node_t1] connected to node [{node_t0}{4SqBTyYNQ82J9c75Cs7jtg}{kutaNSYbTZCSybvqczgWCA}{127.0.0.1}{127.0.0.1:9400}]
[2016-07-30 22:25:53,045][DEBUG][cluster.service ] [node_t1] cluster state update task [zen-disco-process-pending-joins [{node_t0}{4SqBTyYNQ82J9c75Cs7jtg}{kutaNSYbTZCSybvqczgWCA}{127.0.0.1}{127.0.0.1:9400} elected]] failed
NotMasterException[Node [{node_t1}{eAQts270TiGFpoCDE-0PQQ}{or5bsv2ET220su78DLJk5g}{127.0.0.1}{127.0.0.1:9401}] not master for join request]
[2016-07-30 22:25:53,048][DEBUG][cluster.service ] [node_t1] processing [zen-disco-process-pending-joins [{node_t0}{4SqBTyYNQ82J9c75Cs7jtg}{kutaNSYbTZCSybvqczgWCA}{127.0.0.1}{127.0.0.1:9400} elected]]: took [7ms] no change in cluster_state
```
This commit cleans up the logic a bit to only use failure where there are actual joins that are failed. The result is cleaner logs as well:
```
[2016-07-30 22:23:12,880][DEBUG][cluster.service ] [node_t1] processing [zen-disco-election-stop [{node_t0}{jMR5HCpOQnOM4pGeFkUjng}{B5WIZQAdQk2cWbjGZ21mvQ}{127.0.0.1}{127.0.0.1:9400} elected]]: execute
[2016-07-30 22:23:12,881][DEBUG][cluster.service ] [node_t1] processing [zen-disco-election-stop [{node_t0}{jMR5HCpOQnOM4pGeFkUjng}{B5WIZQAdQk2cWbjGZ21mvQ}{127.0.0.1}{127.0.0.1:9400} elected]]: took [0s] no change in cluster_state
[2016-07-30 22:23:12,881][DEBUG][transport ] [node_t1] connected to node [{node_t0}{jMR5HCpOQnOM4pGeFkUjng}{B5WIZQAdQk2cWbjGZ21mvQ}{127.0.0.1}{127.0.0.1:9400}]
```
Before this commit when an index pattern is used to filter the cluster state, only indices metadata are populated and routing table is just empty. This commit aligns the behavior of the filtering of cluster state's routing table with the filtering of cluster state's metadata so that coherent data are returned for both routing table & metadata when index pattern is requested.
In an effort to reduce the number of tiny packages we have in the
code base this moves all the files that were in subdirectories of
`org.elasticsearch.rest.action.admin.cluster` into
`org.elasticsearch.rest.action.admin.cluster`.
Also fixes line length in these packages.
This is cleanup work from #19566, where @nik9000 suggested trying to nuke the isCreated and isFound methods. I've combined nuking the two methods with removing UpdateHelper.Operation in favor of DocWriteResponse.Operation here.
Closes#19631.
In an effort to reduce the number of tiny packages we have in the
code base this moves all the files that were in subdirectories of
`org.elasticsearch.rest.action.admin.indices` into
`org.elasticsearch.rest.action.admin.indices`.
It also adds a `package-info.java` file explaining what the files in
the package *do*.
Also fixes line length in these packages. It makes a single non-checkstyle
change: implementing `ToXContent` on `GetIndexTemplatesResponse`. I did
this because it was the right thing to do and it fixed a line length
violation.
The plain highligher fails when it tries to select the fragments based on a query containing either a `has_child` or `has_parent` query.
The plain highligher should just ignore parent/child queries as it makes no sense to highligh a parent match with a has_child as the child documents are not available at highlight time. Instead if child document should be highlighed inner hits should be used.
Parent/child queries already have no effect when the `fvh` or `postings` highligher is used. The test added in this commit verifies that.
Closes#14999
Currently when the `fields` parameter used in a `multi_match` query contains a
wildcard expression that doesn't resolve to any field name in the target index,
MultiMatchQueryBuilder produces a `null` query. This change changes it to be a
MatchNoDocs query, since returning no documents for this case is already the
current behaviour. Also adding missing field names (with and without wildcards)
to the unit and integration test.
This change adds a second ParseField for the `aggs` field in the search
request so both `aggregations` and `aggs` are undeprecated allowed
fields in the search request
Closes#19504
The current heuristic to compute a default shard size is pretty aggressive,
it returns `max(10, number_of_shards * size)` as a value for the shard size.
I think making it less aggressive has the benefit that it would reduce the
likelyness of running into OOME when there are many shards (yearly
aggregations with time-based indices can make numbers of shards in the
thousands) and make the use of breadth-first more likely/efficient.
This commit replaces the heuristic with `size * 1.5 + 10`, which is enough
to have good accuracy on zipfian distributions.
upgrades if it determines the read data is in the legacy
format. It writes the upgraded version if it is not a
read-only repository and caches the repository data if
it is a read-only repository.
Add an assertion to the most popular way of turning the response object
into the actual http response. As it stands all places we return
`201 CREATED` we return the `Location` header. This will help to keep it
that way, though it won't catch all uses.
Followup to #19509
When you simulate a pipeline without specifying an id against a node where the request is redirected to a master node,
the request and the response is throwing a NPE:
```
java.lang.NullPointerException
at __randomizedtesting.SeedInfo.seed([3B9536AC6AA23C06:DD62280CF765DA1F]:0)
at org.elasticsearch.common.io.stream.StreamOutput.writeString(StreamOutput.java:300)
at org.elasticsearch.action.ingest.SimulatePipelineRequest.writeTo(SimulatePipelineRequest.java:92)
at org.elasticsearch.transport.local.LocalTransport.sendRequest(LocalTransport.java:222)
at org.elasticsearch.test.transport.AssertingLocalTransport.sendRequest(AssertingLocalTransport.java:95)
at org.elasticsearch.transport.TransportService.sendRequest(TransportService.java:470)
at org.elasticsearch.action.TransportActionNodeProxy.execute(TransportActionNodeProxy.java:51)
at org.elasticsearch.client.transport.support.TransportProxyClient.lambda$execute$441(TransportProxyClient.java:63)
at org.elasticsearch.client.transport.TransportClientNodesService.execute(TransportClientNodesService.java:233)
at org.elasticsearch.client.transport.support.TransportProxyClient.execute(TransportProxyClient.java:63)
at org.elasticsearch.client.transport.TransportClient.doExecute(TransportClient.java:309)
at org.elasticsearch.client.support.AbstractClient.execute(AbstractClient.java:403)
at org.elasticsearch.client.FilterClient.doExecute(FilterClient.java:67)
at org.elasticsearch.client.support.AbstractClient.execute(AbstractClient.java:403)
at org.elasticsearch.client.support.AbstractClient$ClusterAdmin.execute(AbstractClient.java:710)
at org.elasticsearch.action.ActionRequestBuilder.execute(ActionRequestBuilder.java:80)
at org.elasticsearch.action.ActionRequestBuilder.execute(ActionRequestBuilder.java:54)
at org.elasticsearch.action.ActionRequestBuilder.get(ActionRequestBuilder.java:62)
at org.elasticsearch.ingest.bano.BanoProcessorIntegrationTest.testSimulateProcessorConfigTarget(BanoProcessorIntegrationTest.java:139)
```
This patch fixes this and adds some random tests.
* fix explain in function_score if no function filter matches
When each function in function_score has a filter but none of them matches
we always assume 1 for the combined functions and then combine that with the
sub query score.
But the explanation did not reflect that because in case no function matched
we did not even use the actual score that was computed in the explanation.
The reason for this change is that currently if a user specifies e.g.`2M`
meaning 2 months as a time value instead of throwing an exception
explaining that time units in months are not supported (due to months
having variable time spans) we instead will parse this to 2 minutes.
This could be surprising to a user and could mean put a lot of load on
the cluster performing a task that was never intended and whose results
will be useless anyway.
It is generally accepted that `m` indicates minutes and `M` indicates
months with time values so this is consistent with the expectations a
user might have around specifying time units.
A concrete example of where this causes issues is in the decay score
function which uses TimeValue to parse the scale and offset parameters
of the decay into millisecond values to use in the calculation.
Relates to #19619
Currently to use the ResourceWatcherService to watch files, you
implement a FileChangesListener. However, this is a class, not an
interface, even though it has no base state or anything like that, just
defining a few methods. This change converts FileChangesListener to an
interface.
The tests for authentication extend ESIntegTestCase and use a mock
authentication plugin. This way the clients don't have to worry about
running it. Sadly, that means we don't really have good coverage on the
REST portion of the authentication.
This also adds ElasticsearchStatusException, and exception on which you
can set an explicit status. The nice thing about it is that you can
set the RestStatus that it returns to whatever arbitrary status you like
based on the status that comes back from the remote system.
reindex-from-remote then uses it to wrap all remote failures, preserving
the status from the remote Elasticsearch or whatever proxy is between us
and the remove Elasticsearch.
It's possible that the shard has been closed but the resources
associated with it have not yet been released. This waits until the
index lock can be obtained before running the tool.
This test fails because of an unknown exceptions in FsService.stats() method, which causes no stats to be returned. With this change the exception that is causing this issue is going to be logged.
Related to #19591 and #17964
This makes it obvious that these tests are for running the client yaml
suites. Now that there are other ways of running tests using the REST
client against a running cluster we can't go on calling the shared
client yaml tests "REST tests". They are rest tests, but they aren't
**the** rest tests.
This adds an extra REST handler for "_ingest/pipeline" so that users do not need to supply "_ingest/pipeline/*" to get all of them.
- Also adds a teardown section to related REST-tests for ingest.
Performing the bulk request shown in #19267 now results in the following:
```
{"_index":"test","_type":"test","_id":"1","_version":1,"_operation":"create","forced_refresh":false,"_shards":{"total":2,"successful":1,"failed":0},"status":201}
{"_index":"test","_type":"test","_id":"1","_version":1,"_operation":"noop","forced_refresh":false,"_shards":{"total":2,"successful":1,"failed":0},"status":200}
```
This adds the `bin/elasticsearch-translate` bin file that will be used
for CLI tasks pertaining to Elasticsearch. Currently it implements only
a single sub-command, `truncate-translog`, that creates a truncated
translog for a given folder.
Here's what running the tool looks like:
```
λ bin/elasticsearch-translog truncate -d data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/
Checking existing translog files
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
! WARNING: Elasticsearch MUST be stopped before running this tool !
! !
! WARNING: Documents inside of translog files will be lost !
! !
! WARNING: The following files will be DELETED! !
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-10.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-18.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-21.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-12.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-25.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-29.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-2.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-5.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-41.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-6.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-37.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-24.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-11.ckp
Continue and DELETE files? [y/N] y
Reading translog UUID information from Lucene commit from shard at [data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/index]
Translog Generation: 3
Translog UUID : AxqC4rocTC6e0fwsljAh-Q
Removing existing translog files
Creating new empty checkpoint at [data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog.ckp]
Creating new empty translog at [data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-3.tlog]
Done.
```
It also includes a `-b` batch operation that can be used to skip the
confirmation diaglog.
Resolves#19123
This change adds a new special path to the buckets_path syntax
`_bucket_count`. This new option will return the number of buckets for a
multi-bucket aggregation, which can then be used in pipeline
aggregations.
Closes#19553
When the request body is missing, all documents in the target index are counted.
As mentioned in #19422, the same should happen when the request body is an empty
json object. This is also the behaviour for the `_search` endpoint and the two
APIs should behave in the same way.
Before the aggregation tree was traversed to figure out what the parent level is, this commit
changes that by using `NestedScope` to figure out the nested depth level. The big upsides
are that this cleans up `NestedAggregator` (it used a hack to lazily figure out the nested parent filter)
and this is also what `nested` query uses and therefor the `nested` query can be included inside `nested`
aggregation and work correctly.
Closes#11749Closes#12410
This adds a header that looks like `Location: /test/test/1` to the
response for the index/create/update API. The requirement for the header
comes from https://www.w3.org/Protocols/rfc2616/rfc2616-sec10.htmlhttps://tools.ietf.org/html/rfc7231#section-7.1.2 claims that relative
URIs are OK. So we use an absolute path which should resolve to the
appropriate location.
Closes#19079
This makes large changes to our rest test infrastructure, allowing us
to write junit tests that test a running cluster via the rest client.
It does this by splitting ESRestTestCase into two classes:
* ESRestTestCase is the superclass of all tests that use the rest client
to interact with a running cluster.
* ESClientYamlSuiteTestCase is the superclass of all tests that use the
rest client to run the yaml tests. These tests are shared across all
official clients, thus the `ClientYamlSuite` part of the name.
This adds new circuit breaking with the "request" breaker, which adds
circuit breaks based on the number of buckets created during
aggregations. It consists of incrementing during AggregatorBase creation
This also bumps the REQUEST breaker to 60% of the JVM heap now.
The output when circuit breaking an aggregation looks like:
```json
{
"shard" : 0,
"index" : "i",
"node" : "a5AvjUn_TKeTNYl0FyBW2g",
"reason" : {
"type" : "exception",
"reason" : "java.util.concurrent.ExecutionException: QueryPhaseExecutionException[Query Failed [Failed to execute main query]]; nested: CircuitBreakingException[[request] Data too large, data for [<agg [otherthings]>] would be larger than limit of [104857600/100mb]];",
"caused_by" : {
"type" : "execution_exception",
"reason" : "QueryPhaseExecutionException[Query Failed [Failed to execute main query]]; nested: CircuitBreakingException[[request] Data too large, data for [<agg [myagg]>] would be larger than limit of [104857600/100mb]];",
"caused_by" : {
"type" : "circuit_breaking_exception",
"reason" : "[request] Data too large, data for [<agg [otherthings]>] would be larger than limit of [104857600/100mb]",
"bytes_wanted" : 104860781,
"bytes_limit" : 104857600
}
}
}
}
```
Relates to #14046
Messy tests with mustache were either moved to core, moved to a rest test or remained untouched if they actually tested mustache.
Also removed tests that were redundant.
After #13834 many tests that used Groovy scripts (for good or bad reason) in their tests have been moved in the lang-groovy module and the issue #13837 has been created to track these messy tests in order to clean them up.
This commit moves more tests back in core, removes the dependency on Groovy, changes the scripts in order to use the mocked script engine, and change the tests to integration tests.
This change renames the package org.elasticsearch.search.fetch.fielddata in org.elasticsearch.search.fetch.docvalues and renames the
FieldData* classes in DocValue*. This is a follow up of the renaming that happened in #18943
Azure and Google cloud blob containers, as the APIs for both return
a 404 in the case of a missing object, which we already handle through
a NoSuchFileFoundException.
With #19140 we started persisting the node ID across node restarts. Now that we have a "stable" anchor, we can use it to generate a stable default node name and make it easier to track nodes over a restarts. Sadly, this means we will not have those random fun Marvel characters but we feel this is the right tradeoff.
On the implementation side, this requires a bit of juggling because we now need to read the node id from disk before we can log as the node node is part of each log message. The PR move the initialization of NodeEnvironment as high up in the starting sequence as possible, with only one logging message before it to indicate we are initializing. Things look now like this:
```
[2016-07-15 19:38:39,742][INFO ][node ] [_unset_] initializing ...
[2016-07-15 19:38:39,826][INFO ][node ] [aAmiW40] node name set to [aAmiW40] by default. set the [node.name] settings to change it
[2016-07-15 19:38:39,829][INFO ][env ] [aAmiW40] using [1] data paths, mounts [[ /(/dev/disk1)]], net usable_space [5.5gb], net total_space [232.6gb], spins? [unknown], types [hfs]
[2016-07-15 19:38:39,830][INFO ][env ] [aAmiW40] heap size [1.9gb], compressed ordinary object pointers [true]
[2016-07-15 19:38:39,837][INFO ][node ] [aAmiW40] version[5.0.0-alpha5-SNAPSHOT], pid[46048], build[473d3c0/2016-07-15T17:38:06.771Z], OS[Mac OS X/10.11.5/x86_64], JVM[Oracle Corporation/Java HotSpot(TM) 64-Bit Server VM/1.8.0_51/25.51-b03]
[2016-07-15 19:38:40,980][INFO ][plugins ] [aAmiW40] modules [percolator, lang-mustache, lang-painless, reindex, aggs-matrix-stats, lang-expression, ingest-common, lang-groovy, transport-netty], plugins []
[2016-07-15 19:38:43,218][INFO ][node ] [aAmiW40] initialized
```
Needless to say, settings `node.name` explicitly still works as before.
The commit also contains some clean ups to the relationship between Environment, Settings and Plugins. The previous code suggested the path related settings could be changed after the initial Environment was changed. This did not have any effect as the security manager already locked things down.
Makes deleting snapshots more robust by first deleting the
snapshot from the index generational file, then handling
individual deletion file errors with log messages instead of
failing the entire operation.
Added BlobContainer tests for HDFS storage
and caught a bug at the same time in which
deleteBlob was not raising an IOException
when the blobName did not exist.
Previously when trying to listen on virtual interfaces during
bootstrap the application would stop working - the interface
couldn't be found by the NetworkUtils class.
The NetworkUtils utilize the underlying JDK NetworkInterface
class which, when asked to lookup by name only takes physical
interfaces into account, failing at virtual (or subinterfaces)
ones (returning null).
Note that when interating over all interfaces, both physical and
virtual ones are taken into account.
This changeset asks for all known interfaces, iterates over them
and matches on the given name as part of the loop, allowing it
to catch both physical and virtual interfaces.
As a result, elasticsearch can now also serve on virtual
interfaces.
A test case has been added which at least makes sure that all
iterable interfaces can be found by their respective name. (It's
not easily possible in a unit test to "fake" virtual interfaces).
Relates #19537
Fixes CORS handling so that it uses the defaults for http.cors.allow-methods
and http.cors.allow-headers if none are specified in the config.
Closes#19520
#19096 introduced a generic TCPTransport base class so we can have multiple TCP based transport implementation. These implementations can vary in how they respond internally to situations where we concurrently send, receive and handle disconnects and can have different exceptions. However, disconnects are important events for the rest of the code base and should be distinguished from other errors (for example, it signals TransportMasterAction that it needs to retry and wait for the a (new) master to come back). Therefore, we should make sure that all the implementations do the proper translation from their internal exceptions into ConnectTransportException which is used externally.
Similarly we should make sure that the transport implementation properly recognize errors that were caused by a disconnect as such and deal with them correctly. This was, for example, the source of a build failure at https://elasticsearch-ci.elastic.co/job/elastic+elasticsearch+master+multijob-intake/1080 , where a concurrency issue cause SocketException to bubble out of MockTcpTransport.
This PR adds a tests which concurrently simulates connects, disconnects, sending and receiving and makes sure the above holds. It also fixes anything (not much!) that was found it.
creation timeout so they process the index creation cluster state update
before the test finishes and attempts to cleanup. Otherwise, the index
creation cluster state update could be processed after the test finishes
and cleans up, thereby leaking an index in the cluster state that could
cause issues for other tests that wouldn't expect the index to exist.
Closes#19530
In the lack of tests the analyzer.alias feature was pretty much not working
at all on current master. Issues like #19163 showed some serious problems for users
using this feature upgrading to an alpha version.
This change fixes the processing order and allows aliases to be set for
existing analyzers like `default`. This change also ensures that if `default`
is aliased the correct analyzer is used for `default_search` etc.
Closes#19163
Add parser for anonymous char_filters/tokenizer/token_filters
Using Settings in AnalyzeRequest for anonymous definition
Add breaking changes document
Closed#8878
* rethrow script compilation exceptions into ingest configuration exceptions
* update readProcessor to rethrow any exception as an ElasticsearchException
Remove `ParseField` constants used for names where there are no deprecated
names and just use the `String` version of the registration method instead.
This is step 2 in cleaning up the plugin interface for extending
search time actions. Aggregations are next.
This is breaking for plugins because those that register a new query should
now implement `SearchPlugin` rather than `onModule(SearchModule)`.
When index creation is not acknowledged (due to a very low request timeout) it is possible that the index is still created.
If a subsequent index-exists request completes before the cluster state of the index creation has been fully applied, it
might miss the newly created index.
* Remove outdated aggregation registration method
* Remove AggregationStreams
* Adds StreamInput#readNamedWriteableList and
StreamOutput#writeNamedWriteableList convenience methods. We strive to
make the reading and writing from the streams terse so they are easier
to scan visually.
* Remove PipelineAggregatorStreams
* Remove stream info from InternalAggreation.Type
* Remove InternalAggregation#type
* Remove Streamable from PipelineAggregator
* Remove Streamable from MultiBucketsAggregation.Bucket
During query refactoring the query string query parameter
'auto_generate_phrase_queries' was accidentally renamed
to 'auto_generated_phrase_queries'.
With this commit we restore the old name.
Closes#19512
Currently if a string field is not_analyzed, but a
position_increment_gap is set, it will lookup the default analyzer and
set it, along with the position_increment_gap, before the code which
handles setting the keyword analyzer for not_analyzed fields has a
chance to run. This change adds a parsing check and test for that case.
ThreadPool#schedule can throw a rejected execution exception. Yet, the
rejected execution exception that it throws comes from the EsAbortPolicy
which throws an EsRejectedExecutionException. This exception does not
inherit from RejectedExecutionException so instead we must catch the
former instead of the latter.
Colin Goodheart-Smithe
Ali Beyad
Yannick Welsch
Boaz Leskes
Jason Tedor
David Pilato
Ryan Ernst
javanna
Clinton Gormley
Robert Muir
Britta Weber
Adrien Grand
Lee Hinman
Igor Motov
Robert Muir
Nik Everett
Daniel Mitterdorfer
Tanguy Leroux
Alexander Lin
Christoph Büscher
chengpohi
Michael McCandless
Mike McCandless
Martijn van Groningen
Areek Zillur
Chris Earle
Jim Ferenczi
gfyoung
Michael Nitschinger
Tal Levy
Simon Willnauer
Jun Ohtani