Commit Graph

147 Commits

Author SHA1 Message Date
Nhat Nguyen b71490b06b
Deprecate indices without soft-deletes (#50502) (#50634)
Soft-deletes will be enabled for all indices in 8.0. Hence, we should
deprecate new indices without soft-deletes in 7.x.

Backport of #50502
2020-01-06 08:44:30 -05:00
Nhat Nguyen 33204c2055 Use peer recovery retention leases for indices without soft-deletes (#50351)
Today, the replica allocator uses peer recovery retention leases to
select the best-matched copies when allocating replicas of indices with
soft-deletes. We can employ this mechanism for indices without
soft-deletes because the retaining sequence number of a PRRL is the
persisted global checkpoint (plus one) of that copy. If the primary and
replica have the same retaining sequence number, then we should be able
to perform a noop recovery. The reason is that we must be retaining
translog up to the local checkpoint of the safe commit, which is at most
the global checkpoint of either copy). The only limitation is that we
might not cancel ongoing file-based recoveries with PRRLs for noop
recoveries. We can't make the translog retention policy comply with
PRRLs. We also have this problem with soft-deletes if a PRRL is about to
expire.

Relates #45136
Relates #46959
2019-12-23 22:04:07 -05:00
Nhat Nguyen 1dc98ad617 Ensure global checkpoint was advanced and synced
We need to make sure that the global checkpoints and peer recovery
retention leases were advanced to the max_seq_no and synced; otherwise,
we can risk expiring some peer recovery retention leases because of the
file-based recovery threshold.

Relates #49448
2019-12-23 21:10:30 -05:00
Yannick Welsch c37c53a7f7
Fix testAutoExpandIndicesDuringRollingUpgrade (#50427)
Fixes the muted test "testAutoExpandIndicesDuringRollingUpgrade". We can't wait in the test for
the index to be green, as we have put a filter exclusion into place that prevents all shards from
being allocated after a node rejoins. Instead we check whether the correct auto-expansion has
taken place.

Closes #50426
2019-12-20 17:15:49 +01:00
Yannick Welsch 1c7bfebe01 Mute testAutoExpandIndicesDuringRollingUpgrade
Relates #50426
2019-12-20 12:15:43 +01:00
Yannick Welsch a3837786ec Fix testAutoExpandIndicesDuringRollingUpgrade (#50361)
Follow-up to #50361 that fixes the test that does not work against older ES versions
2019-12-20 11:50:03 +01:00
Yannick Welsch 4f805deb0c Only auto-expand replicas with allocation filtering when all nodes upgraded (#50361)
Follow-up to #48974 that ensures that replicas are only auto-expanded according to allocation
filtering rules once all nodes are upgraded to a version that supports this. Helps with
orchestrating cluster upgrades.
2019-12-20 11:50:00 +01:00
Yannick Welsch 5f37f1f401 Revert "Only auto-expand replicas with allocation filtering when all nodes upgraded (#50361)"
This reverts commit df4fe73b84.
2019-12-20 11:07:30 +01:00
Yannick Welsch df4fe73b84 Only auto-expand replicas with allocation filtering when all nodes upgraded (#50361)
Follow-up to #48974 that ensures that replicas are only auto-expanded according to allocation
filtering rules once all nodes are upgraded to a version that supports this. Helps with
orchestrating cluster upgrades.
2019-12-20 10:22:44 +01:00
Nhat Nguyen df46848fb0 Migrate peer recovery from translog to retention lease (#49448)
Since 7.4, we switch from translog to Lucene as the source of history
for peer recoveries. However, we reduce the likelihood of
operation-based recoveries when performing a full cluster restart from
pre-7.4 because existing copies do not have PPRL.

To remedy this issue, we fallback using translog in peer recoveries if
the recovering replica does not have a peer recovery retention lease,
and the replication group hasn't fully migrated to PRRL.

Relates #45136
2019-12-15 10:24:39 -05:00
Jim Ferenczi d6445fae4b Add a cluster setting to disallow loading fielddata on _id field (#49166)
This change adds a dynamic cluster setting named `indices.id_field_data.enabled`.
When set to `false` any attempt to load the fielddata for the `_id` field will fail
with an exception. The default value in this change is set to `false` in order to prevent
fielddata usage on this field for future versions but it will be set to `true` when backporting
to 7x. When the setting is set to true (manually or by default in 7x) the loading will also issue
a deprecation warning since we want to disallow fielddata entirely when https://github.com/elastic/elasticsearch/issues/26472
is implemented.

Closes #43599
2019-11-28 09:35:28 +01:00
Dimitris Athanasiou a000d868a0
[7.x] Also expect RELOCATING in RecoveryIT.testRecoveryClosedIndex (#49090) (#49154)
In addition to the fix in #48506, it seems we could also get the
`RELOCATING` state.

This fixes the failure in
 https://gradle-enterprise.elastic.co/s/svjmmvqk32cii/tests/ua7icdau7nz6y-2cwvhj3qg5qou?openStackTraces=WzBd
2019-11-15 15:56:53 +02:00
Rory Hunter c46a0e8708
Apply 2-space indent to all gradle scripts (#49071)
Backport of #48849. Update `.editorconfig` to make the Java settings the
default for all files, and then apply a 2-space indent to all `*.gradle`
files. Then reformat all the files.
2019-11-14 11:01:23 +00:00
Mark Vieira 6ab4645f4e
[7.x] Introduce type-safe and consistent pattern for handling build globals (#48818)
This commit introduces a consistent, and type-safe manner for handling
global build parameters through out our build logic. Primarily this
replaces the existing usages of extra properties with static accessors.
It also introduces and explicit API for initialization and mutation of
any such parameters, as well as better error handling for uninitialized
or eager access of parameter values.

Closes #42042
2019-11-01 11:33:11 -07:00
Yannick Welsch 7892ea8aff Fix testRecoveryClosedIndex (#48506)
Fixes test failure: https://gradle-enterprise.elastic.co/s/lplb52nlth4re/tests/ftbzinkix5rme-2cwvhj3qg5qou
2019-10-31 16:24:40 +01:00
Alpar Torok 2b16d7bcf8
Backport testclusters all (#47565)
* Bwc testclusters all (#46265)

Convert all bwc projects to testclusters

* Fix bwc versions config

* WIP fix rolling upgrade

* Fix bwc tests on old versions

* Fix rolling upgrade
2019-10-04 16:12:53 +03:00
Yannick Welsch 99d2fe295d Use optype CREATE for single auto-id index requests (#47353)
Changes auto-id index requests to use optype CREATE, making it compliant with our docs.
This will also make these auto-id index requests compatible with the new "create-doc" index
privilege (which is based on the optype), the default optype is changed to create, just as it is
already documented.
2019-10-02 14:16:52 +02:00
Yannick Welsch 7b2613db55 Allow optype CREATE for append-only indexing operations (#47169)
Bulk requests currently do not allow adding "create" actions with auto-generated IDs.
This commit allows using the optype CREATE for append-only indexing operations. This is
mainly the user facing aspect of it.
2019-10-02 14:16:52 +02:00
Nhat Nguyen f91dd903cb Strengthen testUpdate in rolling upgrade
We hit a bug where we can't partially update documents created in a
mixed cluster between 5.x and 6.x. Although this bug does not affect
7.0 or later, we should have a good test that catches this issue.

Relates #46198
2019-09-03 18:40:57 -04:00
David Turner 9ff320d967
Use index for peer recovery instead of translog (#45137)
Today we recover a replica by copying operations from the primary's translog.
However we also retain some historical operations in the index itself, as long
as soft-deletes are enabled. This commit adjusts peer recovery to use the
operations in the index for recovery rather than those in the translog, and
ensures that the replication group retains enough history for use in peer
recovery by means of retention leases.

Reverts #38904 and #42211
Relates #41536
Backport of #45136 to 7.x.
2019-08-02 15:00:43 +01:00
Henning Andersen 859709cc94 Closed index noop recovery during upgrade (#44072)
Test that closed indices do noop recovery during rolling upgrade.
2019-07-09 11:46:42 +02:00
Nhat Nguyen 4123ade2b6 Add test ensure we can execute update requests in mixed cluster
Relates #42596
2019-05-27 18:27:50 -04:00
Nhat Nguyen 84df48ccb3 Recovery with syncId should verify seqno infos (#41265)
This change verifies and aborts recovery if source and target have the
same syncId but different sequenceId. This commit also adds an upgrade
test to ensure that we always utilize syncId.
2019-05-21 22:44:17 -04:00
Jason Tedor 7f3ab4524f
Bump 7.x branch to version 7.2.0
This commit adds the 7.2.0 version constant to the 7.x branch, and bumps
BWC logic accordingly.
2019-05-01 13:38:57 -04:00
Jim Ferenczi a8c3c5cd78
Restore rolling upgrade test for the _all field (#41462)
This commit adapts the rolling upgrade test introduced in #37808
to ignore runs that upgrade from a version on or after 7.0.

Closes #41453
2019-04-27 18:37:15 +02:00
Mark Vieira 1287c7d91f
[Backport] Replace usages RandomizedTestingTask with built-in Gradle Test (#40978) (#40993)
* Replace usages RandomizedTestingTask with built-in Gradle Test (#40978)

This commit replaces the existing RandomizedTestingTask and supporting code with Gradle's built-in JUnit support via the Test task type. Additionally, the previous workaround to disable all tasks named "test" and create new unit testing tasks named "unitTest" has been removed such that the "test" task now runs unit tests as per the normal Gradle Java plugin conventions.

(cherry picked from commit 323f312bbc829a63056a79ebe45adced5099f6e6)

* Fix forking JVM runner

* Don't bump shadow plugin version
2019-04-09 11:52:50 -07:00
Nhat Nguyen a9416708d0 Ensure relocation occur in testRelocationWithConcurrentIndexing (#40801)
If the relocation is throttled, the subsequent search request on the
target node (i.e., with preference _only_nodes=target_node) will fail
because some shards have not moved to that node yet. With this change,
we will wait for the relocation happens by busily checking the routing
table of the testing index on the target node.

Closes #34950
2019-04-08 22:47:20 -04:00
Yannick Welsch 6ae7d593ea Avoid background sync on relocated primary (#40800)
There were some test failures caused by the background retention lease sync running on a relocated
primary. This commit fixes the situation that triggered the assertion and reactivates the failing test.

Closes #40731
2019-04-03 20:28:48 +02:00
Dimitrios Liappis a3f53cfd05
[TEST] Mute RecoveryWithConcurrentIndexing test (#40735)
Due to https://github.com/elastic/elasticsearch/issues/40731

Backport of https://github.com/elastic/elasticsearch/pull/40733
2019-04-02 16:23:22 +03:00
Nhat Nguyen 606411bce8 Mute testRelocationWithConcurrentIndexing
Tracked at #34950
2019-03-20 12:46:36 -04:00
Nhat Nguyen d58864745c Dump recovery if fail to get doc count with preference (#40168)
With this change, we will dump the recovery state if we fail to get doc
count for a given index with a preference in rolling upgrade tests. We
should have more information to look into why the provided preference is
not valid. I also unmuted `testRelocationWithConcurrentIndexing` in this
change.

Relates #34950
2019-03-19 13:09:04 -04:00
Nhat Nguyen 15ab0e23e0 Unmute testHistoryUUIDIsGenerated
Fixed in #32270
Relates to #31291
2019-03-04 10:21:23 -05:00
Tanguy Leroux e005eeb0b3
Backport support for replicating closed indices to 7.x (#39506)(#39499)
Backport support for replicating closed indices (#39499)
    
    Before this change, closed indexes were simply not replicated. It was therefore
    possible to close an index and then decommission a data node without knowing
    that this data node contained shards of the closed index, potentially leading to
    data loss. Shards of closed indices were not completely taken into account when
    balancing the shards within the cluster, or automatically replicated through shard
    copies, and they were not easily movable from node A to node B using APIs like
    Cluster Reroute without being fully reopened and closed again.
    
    This commit changes the logic executed when closing an index, so that its shards
    are not just removed and forgotten but are instead reinitialized and reallocated on
    data nodes using an engine implementation which does not allow searching or
     indexing, which has a low memory overhead (compared with searchable/indexable
    opened shards) and which allows shards to be recovered from peer or promoted
    as primaries when needed.
    
    This new closing logic is built on top of the new Close Index API introduced in
    6.7.0 (#37359). Some pre-closing sanity checks are executed on the shards before
    closing them, and closing an index on a 8.0 cluster will reinitialize the index shards
    and therefore impact the cluster health.
    
    Some APIs have been adapted to make them work with closed indices:
    - Cluster Health API
    - Cluster Reroute API
    - Cluster Allocation Explain API
    - Recovery API
    - Cat Indices
    - Cat Shards
    - Cat Health
    - Cat Recovery
    
    This commit contains all the following changes (most recent first):
    * c6c42a1 Adapt NoOpEngineTests after #39006
    * 3f9993d Wait for shards to be active after closing indices (#38854)
    * 5e7a428 Adapt the Cluster Health API to closed indices (#39364)
    * 3e61939 Adapt CloseFollowerIndexIT for replicated closed indices (#38767)
    * 71f5c34 Recover closed indices after a full cluster restart (#39249)
    * 4db7fd9 Adapt the Recovery API for closed indices (#38421)
    * 4fd1bb2 Adapt more tests suites to closed indices (#39186)
    * 0519016 Add replica to primary promotion test for closed indices (#39110)
    * b756f6c Test the Cluster Shard Allocation Explain API with closed indices (#38631)
    * c484c66 Remove index routing table of closed indices in mixed versions clusters (#38955)
    * 00f1828 Mute CloseFollowerIndexIT.testCloseAndReopenFollowerIndex()
    * e845b0a Do not schedule Refresh/Translog/GlobalCheckpoint tasks for closed indices (#38329)
    * cf9a015 Adapt testIndexCanChangeCustomDataPath for replicated closed indices (#38327)
    * b9becdd Adapt testPendingTasks() for replicated closed indices (#38326)
    * 02cc730 Allow shards of closed indices to be replicated as regular shards (#38024)
    * e53a9be Fix compilation error in IndexShardIT after merge with master
    * cae4155 Relax NoOpEngine constraints (#37413)
    * 54d110b [RCI] Adapt NoOpEngine to latest FrozenEngine changes
    * c63fd69 [RCI] Add NoOpEngine for closed indices (#33903)
    
    Relates to #33888
2019-03-01 14:48:26 +01:00
Alpar Torok bd4ca4c702 Rename integTest to bwcTestSample for bwc test projects (#38433)
* Rename integTest to bwcTestSample for bwc test projects

This change renames the `integTest` task to `bwcTestSample` for projects
testing bwc to make it possible to run all the bwc tests that check
would run without running on bwc tests.

This change makes it possible to add a new PR check on backports to make
sure these don't break BWC tests in master.

* Rename task as per PR
2019-02-11 15:05:16 +02:00
Jason Tedor fdf6b3f23f
Add 7.1 version constant to 7.x branch (#38513)
This commit adds the 7.1 version constant to the 7.x branch.

Co-authored-by: Andy Bristol <andy.bristol@elastic.co>
Co-authored-by: Tim Brooks <tim@uncontended.net>
Co-authored-by: Christoph Büscher <cbuescher@posteo.de>
Co-authored-by: Luca Cavanna <javanna@users.noreply.github.com>
Co-authored-by: markharwood <markharwood@gmail.com>
Co-authored-by: Ioannis Kakavas <ioannis@elastic.co>
Co-authored-by: Nhat Nguyen <nhat.nguyen@elastic.co>
Co-authored-by: David Roberts <dave.roberts@elastic.co>
Co-authored-by: Jason Tedor <jason@tedor.me>
Co-authored-by: Alpar Torok <torokalpar@gmail.com>
Co-authored-by: David Turner <david.turner@elastic.co>
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
Co-authored-by: Tim Vernum <tim@adjective.org>
Co-authored-by: Albert Zaharovits <albert.zaharovits@gmail.com>
2019-02-07 16:32:27 -05:00
Luca Cavanna a7046e001c
Remove support for maxRetryTimeout from low-level REST client (#38085)
We have had various reports of problems caused by the maxRetryTimeout
setting in the low-level REST client. Such setting was initially added
in the attempts to not have requests go through retries if the request
already took longer than the provided timeout.

The implementation was problematic though as such timeout would also
expire in the first request attempt (see #31834), would leave the
request executing after expiration causing memory leaks (see #33342),
and would not take into account the http client internal queuing (see #25951).

Given all these issues, it seems that this custom timeout mechanism 
gives little benefits while causing a lot of harm. We should rather rely 
on connect and socket timeout exposed by the underlying http client 
and accept that a request can overall take longer than the configured 
timeout, which is the case even with a single retry anyways.

This commit removes the `maxRetryTimeout` setting and all of its usages.
2019-02-06 08:43:47 +01:00
Julie Tibshirani c2e9d13ebd
Default include_type_name to false in the yml test harness. (#38058)
This PR removes the temporary change we made to the yml test harness in #37285
to automatically set `include_type_name` to `true` in index creation requests
if it's not already specified. This is possible now that the vast majority of
index creation requests were updated to be typeless in #37611. A few additional
tests also needed updating here.

Additionally, this PR updates the test harness to set `include_type_name` to
`false` in index creation requests when communicating with 6.x nodes. This
mirrors the logic added in #37611 to allow for typeless document write requests
in test set-up code. With this update in place, we can remove many references
to `include_type_name: false` from the yml tests.
2019-02-01 11:44:13 -08:00
David Turner 81c443c9de
Deprecate minimum_master_nodes (#37868)
Today we pass `discovery.zen.minimum_master_nodes` to nodes started up in
tests, but for 7.x nodes this setting is not required as it has no effect.
This commit removes this setting so that nodes are started with more realistic
configurations, and deprecates it.
2019-01-30 20:09:15 +00:00
Jim Ferenczi 5dcc805dc9
Restore a noop _all metadata field for 6x indices (#37808)
This commit restores a noop version of the AllFieldMapper that is instanciated only
for indices created in 6x. We need this metadata field mapper to be present in this version
in order to allow the upgrade of indices that explicitly disable _all (enabled: false).
The mapping of these indices contains a reference to the _all field that we cannot remove
in 7 so we'll need to keep this metadata mapper in 7x. Since indices created in 6x will not
be compatible with 8, we'll remove this noop mapper in the next major version.

Closes #37429
2019-01-30 08:45:50 +01:00
Ryan Ernst 9a34b20233
Simplify integ test distribution types (#37618)
The integ tests currently use the raw zip project name as the
distribution type. This commit simplifies this specification to be
"default" or "oss". Whether zip or tar is used should be an internal
implementation detail of the integ test setup, which can (in the future)
be platform specific.
2019-01-21 12:37:17 -08:00
markharwood 434430506b
Type removal - added deprecation warnings to _bulk apis (#36549)
Added warnings checks to existing tests
Added “defaultTypeIfNull” to DocWriteRequest interface so that Bulk requests can override a null choice of document type with any global custom choice.
Related to #35190
2019-01-10 21:35:19 +00:00
Jim Ferenczi e38cf1d0dc
Add the ability to set the number of hits to track accurately (#36357)
In Lucene 8 searches can skip non-competitive hits if the total hit count is not requested.
It is also possible to track the number of hits up to a certain threshold. This is a trade off to speed up searches while still being able to know a lower bound of the total hit count. This change adds the ability to set this threshold directly in the track_total_hits search option. A boolean value (true, false) indicates whether the total hit count should be tracked in the response. When set as an integer this option allows to compute a lower bound of the total hits while preserving the ability to skip non-competitive hits when enough matches have been collected.

Relates #33028
2019-01-04 20:36:49 +01:00
Alpar Torok e9ef5bdce8
Converting randomized testing to create a separate unitTest task instead of replacing the builtin test task (#36311)
- Create a separate unitTest task instead of Gradle's built in 
- convert all configuration to use the new task 
- the  built in task is now disabled
2018-12-19 08:25:20 +02:00
Mayya Sharipova f884b2b1cd
Deprecate types in index API (#36575)
* Deprecate types in index API

- deprecate type-based constructors of IndexRequest
- update tests to use typeless IndexRequest constructors
- no yaml tests as they have been already added in #35790

Relates to #35190
2018-12-18 08:53:49 -05:00
Nhat Nguyen 51800de2a8
Enable soft-deletes by default on 7.0.0 or later (#36141)
This change enables soft-deletes by default on ES 7.0.0 or later.

Relates #33222

Co-authored-by: Jason Tedor <jason@tedor.me>
2018-12-11 18:58:49 -05:00
Yannick Welsch 6e6e63d01d
Zen2: Move all mixed-version REST tests to Zen2 (#36398)
Moves all remaining (rolling-upgrade and mixed-version) REST tests to use Zen2. To avoid adding
extra configuration, it relies on Zen2 being set as the default discovery type. This required a few
smaller changes in other tests. I've removed AzureMinimumMasterNodesTests which tests Zen1
functionality and dates from a time where host providers were not configurable and each cloud
plugin had its own discovery.type, subclassing the ZenDiscovery class. I've also adapted a few tests
which were unnecessarily adding addTestZenDiscovery = false for the same legacy reasons. Finally,
this also moves the unconfigured-node-name REST test to Zen2, testing the auto-bootstrapping
functionality in development mode when no discovery configuration is provided.
2018-12-10 11:00:57 +01:00
David Roberts 9e8cfbb40d
[ML] Deprecate X-Pack centric ML endpoints (#36315)
This commit is part of our plan to deprecate and
ultimately remove the use of _xpack in the REST APIs.

Relates #35958
2018-12-07 20:34:11 +00:00
Armin Braun e6d190613f
[ZEN2] Use Zen2 in REST Tests (#36300) 2018-12-07 09:15:11 +01:00
Nhat Nguyen 968b0b1992
Add soft-deletes upgrade tests (#36286)
This change adds a rolling-upgrade and full-cluster-restart test with
soft-deletes enabled.
2018-12-07 03:01:04 -05:00
Jim Ferenczi 18866c4c0b
Make hits.total an object in the search response (#35849)
This commit changes the format of the `hits.total` in the search response to be an object with
a `value` and a `relation`. The `value` indicates the number of hits that match the query and the
`relation` indicates whether the number is accurate (in which case the relation is equals to `eq`)
or a lower bound of the total (in which case it is equals to `gte`).
This change also adds a parameter called `rest_total_hits_as_int` that can be used in the
search APIs to opt out from this change (retrieve the total hits as a number in the rest response).
Note that currently all search responses are accurate (`track_total_hits: true`) or they don't contain
`hits.total` (`track_total_hits: true`). We'll add a way to get a lower bound of the total hits in a
follow up (to allow numbers to be passed to `track_total_hits`).

Relates #33028
2018-12-05 19:49:06 +01:00