Just like specifying `?preference=_primary`, this adds the ability to
specify `?preference=_replica` or `?preference=_replica_first` on
requests that support it.
Resolves#12222
This action is a liveness test added in #8763 . It should be excluded, just like the fault detection logic or things become overly chatty.
Closes#12291
Most of our tests call assertSearchResponse which checks whether all shards
were successful. However this is usually not necessary given that all shards
that received documents should be available given the way our indexing works.
The only shards that might not be available are those that did not index
any documents. So removing this assertion would allow us to remove most
ensureGreen/ensureYellow calls while still being able to assert on the content
of the search response since all data have been taken into account.
For now I only removed the ensureYellow/Green calls from SearchQueryTests in
order to not de-stabilize the build, but eventually we should remove most of
them.
Today, the unicast zen test configuration will try to find a open port starting at the internal test cluster's
base port and continuing for 1000 ports. The internal test cluster class assigns a port range of 100 ports
to each JVM. This means that the unicast zen test configuration will try ports in the range for another JVM
and can lead to port conflicts. This change uses the same value for both so that the unicast configuration
does not go into another JVM's port range.
Add a unique allocation id for a shard, helping to uniquely identify a specific allocation taking place to a node.
A special case is relocation, where a transient relocationId is kept around to make sure the target initializing shard (when using RoutingNodes) is using it for its id, and when relocation is done, the transient relocationId becomes the actual id of it.
closes#12242
If an index name is reused but a leftover shard still exists on any node
we fail repeatedly to allocate the shard since we now check the index UUID
before reusing data. This commit allows to recover even if there is such a
leftover shard by deleting the leftover shard.
Closes#10677
During master election each node pings in order to discover other nodes and validate the liveness of existing nodes. Based on this information the node either discovers an existing master or, if enough nodes are found (based on `discovery.zen.minimum_master_nodes>>) a new master will be elected.
Currently, the node that is elected as master will currently update it the cluster state to indicate the result of the election. Other nodes will submit a join request to the newly elected master node. Instead of immediately processing the election result, the elected master
node should wait for the incoming joins from other nodes, thus validating the elections result is properly applied. As soon as enough nodes have sent their joins request (based on the `minimum_master_nodes` settings) the cluster state is modified.
Note that if `minimum_master_nodes` is not set, this change has no effect.
Closes#12161
Require urls for URL repository to be listed in repositories.url.allowed_urls setting. This change ensures that only authorized URLs can be accessed by elasticsearch
The previous strategy (target/xxx + .m2/repository) is obviously broken for multi-module
builds.
Includes hack for crazy jython, which "finds its own jar" then looks for a Lib/ beside it
Lucene deprecated this in 4.0 and we only try best effort to support it.
Folks should only use edit distance rather than some length based
similarity. Yet the formular is simple enough such that users can
still do it in the client if they really need to.
Closes#10638
The old script syntax has been removed from the Java API but the metrics aggregations were missed. This change removes the old script API from the ValuesSourceMetricsAggregationBuilder and removes the relevant test methods for the metrics aggregations.
Today we have a intermediate hierarchy for shard and index exceptions
which makes it hard to introduce generic exceptions like ResourceNotFoundException
intoduced in this commit. This commit breaks up the hierarchy by adding index and shard
as a special internal header that gets rendered for every exception that fills that header.
This commit removes dedicated exceptions like `IndexMissingException` or
`IndexShardMissingException` in favour of `ResourceNotFoundException`
Change the default delayed allocation timeout from 0 (no delayed allocation) to 1m. The value came from a test of having a node with 50 shards being indexed into (so beefy translog requiring flush on shutdown), then shutting it down and starting it back up and waiting for it to join the cluster. This took, on a slow machine, about 30s.
The value is conservatively low and does not try to address a virtual machine / OS restart for now, in order to not have the affect of node going away and users being concerned that shards are not being allocated to the rest of the cluster as a result of that. The setting can always be changed in order to increase the delayed allocation if needed.
closes#12166
The MetaData.clusterUUID is guaranteed to be unique across clusters and is handy (which may or may not have the same human readable cluster name).
Closes#11832
As explained in #11831, we currently have uuid fields on the cluster state, meta data and index metadata. The latter two are persistent across changes are being effectively used as a persistent uuid for this cluster and a persistent uuid for an index. The first (ClusterState.uuid) is ephemeral and changes with every change to the cluster state. This is confusing,
We settled on having the following, new names:
-> ClusterState.uuid -> stateUUID (transient)
-> MetaData.uuid -> clusterUUID (persistent)
-> IndexMetaData.uuid -> indexUUID (persistent).
Closes#11914Closes#11831
Today we throw ElasticsearchException if we can't lock the index. This can cause
problems since some places where we have logic to deal with IOException on shard
deletion won't schedule a retry if we can't lock the index dir for removal. This
is the case on shadow replicas for instance if a shared FS is used. The result
of this is that the delete of an index is never acked.
A change in #12116 introduces closing / cleaning of search ctx even if
the index service was closed due to a relocation of it's last shard. This
is not desired since in that case it's fine to serve the pending requests from
the relocated shard. This commit adds an extra check to ensure that the index is
either removed (delete) or closed via API.
The term query parser was too lenient during parsing and allowed to specify
more than one field, even though this expected to filter only for a single field.
This commit returns an exception if a query has been specified more than once.
Closes#12184
Modified ScriptEngineService to pass in a CompiledScript object
with newly added name and type member variables.
This can in turn be used to give better scripting error messages
with the type of script used and the name of the script.
Required slight modifications to the caching mechanism.
Note that this does not enforce good behavior in that plugins will
have to write exceptions that also output the name of the script
in order to be effective. There was no way to wrap the script
methods in a try/catch block properly further up the chain because
many have script-like objects passed back that can be run at a
later time.
closes#6653closes#11449
Changes in a nutshell:
* All expression logic is now encapsulated by ExpressionResolver interface.
* MetaData#convertFromWildcards() gets replaced by WildcardExpressionResolver.
* All of the indices expansion methods are being moved from MetaData class to the new IndexNameExpressionResolver class.
* All single index expansion optimisations are removed.
The logic for resolving a concrete index name from an expression has been moved from MetaData to IndexExpressionResolver. The logic has been cleaned up and simplified were was possible without breaking bwc.
Also the notion of aliasOrIndex has been changed to index expression.
The IndexNameExpressionResolver translates index name expressions into concrete indices. The list of index name expressions are first delegated to the known ExpressionResolverS. An ExpressionResolver is responsible for translating if possible an expression into another expression (possibly but not required this can be concrete indices or aliases) otherwise the expressions are left untouched. Concretely this means converting wildcard expressions into concrete indices or aliases, but in the future other implementations could convert expressions based on different rules.
To prevent many overloading of methods, DocumentRequest extends now from IndicesRequest. All implementation of DocumentRequest already did implement IndicesRequest indirectly.
This allows the creation of the RPM artifact as part of the
maven package phase. The result of this is that we get checksum and
name correction for-free as it's all build an installed into the m2
repository. This also publishes the RPM together with .deb to the mvn
mirror.
Note: this will only build the RPM as part of the package phase if
`-Dpackage.rpm=true` since the binaries to build the RPM are not
availabel on all platforms.
Today we only clear search contexts for deleted indies. Yet, we should
do the same for closed indices to ensure they can be reopened quickly.
Closes#12116
A method for the new Script API were missing in the ValuesSourceMetricsAggregationBuilder. This change adds the missing method and deprecates the old Script API methods
When a node sends a shard started message to the master, the master goes through the routing table looking for the shard to start. At the moment we validate the indexUUID, the node the shard is assigned to and the fact that the shard is initializing. This check goes wrong if a relocating replica shard finishes recovery just at the moment the source node leaves the cluster. In this case the master will cancel the recovery and will likely assign a new initializing replica to the same target node. In this case the message from the relocation recovery can activate the new replica wrongfully.
Also, the logic for decided whether an incoming shard started message will be applied was split between ShardStateAction and the AllocationService.
This commit does the following:
1) Let ShardStateAction only filter basic stuff like index existence and indexUUID.
2) Move the trickier shard started matching logic to the AllocationService and make it stricter
3) Unify ShardStateAction filtering logic for both shard started and shard failed.
4) Add unit tests for all of the above.
For an example test failure see: http://build-us-00.elastic.co/job/es_core_16_centos/388/Closes#11999
Today everything is tight to having the next version as the latest.
In order to work towards 2.0.0.beta1 we need to fix all the usage of
2.0.0-SNAPSHOT to reflect the version we will release soon.
Usually we do this on the release branch but to simplify things I wanna
keep this on master for now and move to 2.1.0-SNAPSHOT on master once
we created a 2.0 branch.
Closes#12148
This information was stored with the snapshot but wasn't available on the interface. Knowing the version of elasticsearch that created the snapshot can be useful to determine the minimal version of the cluster that is required in order to restore this snapshot.
Closes#11980
This change fixes the plugin manager to trim `elasticsearch-` and `es-` prefixes from plugin names
for our official plugins. This restores the old behavior prior to #11805.
Closes#12143
Today it will remove all permissions and only set execute bit:
---x--x--x
Instead we should preserve existing permissions, and just add
read and execute to whatever is there.
Closes#12142
This change allows custom settings to be passed to the client for the external test cluster,
which is necessary when additional settings need to be passed to the client in order to
properly communicate with the external test cluster.
Before inner_hits existed named queries has support to also verify if inner queries of nested query matched with returned documents. This logic was broken and became obsolete from the moment inner hits get released. #10694 fixed named queries for nested docs in the top_hits agg, but it didn't fix the named query support for nested inner hits. This commit fixes that and on top of this also adds support for parent/child inner hits.
We allow setting the node's name a few different ways: the `name` system
property, the setting `name`, and the setting `node.name`. There is an order
of preference to these settings that gets applied, which can copy values from the
system property or `node.name` setting to the `name` setting. When setting
only `node.name` to one of the prompt placeholders, the user would be
prompted twice as the value of `node.name` is copied to `name` prior to
prompting for input. Additionally, the value entered by the user for `node.name`
would not be used and only the value entered for `name` would be used.
This fix changes the behavior to only prompt once when `node.name is set` and
`name` is not set. This is accomplished by waiting until all values have been
prompted and replaced, then the logic for determining the node's name is
executed.
Closes#11564
This commit adds support to retrieve fields when using the bulk update API. This functionality was previously available for the update API
but not for the bulk update API.
Closes#11527
Igor Motov
Alex Ksikes
Zachary Tong
Michael McCandless
Lee Hinman
Boaz Leskes
Martijn van Groningen
Adrien Grand
Jason Tedor
Jay Modi
Simon Willnauer
jaymode
Simon Willnauer
Shay Banon
Robert Muir
Colin Goodheart-Smithe
uboness
Alexander Reelsen
aleph-zero
Jack Conradson
szroland
David Pilato
Ryan Ernst
Israel Ekpo
William Webber
Tanguy Leroux