This commit removes the default path settings for data and logs. With
this change, we now ship the packages with these settings set in the
elasticsearch.yml configuration file rather than going through the
default.path.data and default.path.logs dance that we went through in
the past.
Relates #25408
This commit removes path.conf as a valid setting and replaces it with a
command-line flag for specifying a non-default path for configuration.
Relates #25392
When JAVA_HOME is not set we try to detect the location of Java. If its
location contains a space, due to a lack of quoting we will be
unsuccessful in invoking Java. This commit adds the necessary quoting to
handle this case.
Relates #23822
Removes the `assemble` task from the `build` task when we have
removed `assemble` from the project. We removed `assemble` from
projects that aren't published so our releases will be faster. But
That broke CI because CI builds with `gradle precommit build` and,
it turns out, that `build` includes `check` and `assemble`. With
this change CI will only run `check` for projects without an
`assemble`.
Removes the `assemble` task from projects that are not published.
This should speed up `gradle assemble` by skipping projects that
don't need to be built. Which is useful because `gradle assemble`
is how we cut releases.
This prevents possible race conditions between the Elasticsearch JVM and
plugin native controller processes that can cause the Elasticsearch shutdown
to hang. The problem can happen when the JVM and the controller process
receive a SIGTERM at almost the same time.
(There's an assumption here that Elasticsearch will continue to use other
mechanisms to kill native controller processes.)
This commit changes the task type of the checkoutBwcBranch task to Exec
from LoggedExec so that the output of the checkout command is
shown. This enables us to see the SHA used for the checkout which can be
useful when debugging a BWC break.
Relates #25166
Commit bf007e8d93 was a forward port of logic needed in 5.x to get
the correct bwc branch. However, other changes on master meant that this forward port was not
needed and actually broke the bwc tests. This change removes the incorrect if statement.
Relates #25134
When testing against the previous 5.x release, the bwc project incorrectly would checkout the 5.x
branch instead of the 5.5 branch as it still had the logic that applies for major versions bwc. This change adds
a check to compare the major version when making the decision on the branch to use.
During package install on systemd-based systems, some sysctl settings
should be set (e.g. vm.max_map_count).
In some environments, changing sysctl settings plainly does not work;
previously a global environment variable named
ES_SKIP_SET_KERNEL_PARAMETERS was introduced to skip calling sysctl, but
this causes trouble for:
- configuration management systems, which usually cannot apply an env
var when running a package manager
- package upgrades, which will not have the env var set any more, and
thus leaving the package management system in a bad state (possibly
half-way upgraded, can be very hard to recover)
This removes the env var again and instead of calling systemd-sysctl
manually, tells systemd to restart the wrapper unit - which itself can
be masked by system administrators or management tools if it is known
that sysctl does not work in a given environment.
The restart is not silent on systems in their default configuration, but
is ignored if the unit is masked.
Relates #24234
* Adds nodes usage API to monitor usages of actions
The nodes usage API has 2 main endpoints
/_nodes/usage and /_nodes/{nodeIds}/usage return the usage statistics
for all nodes and the specified node(s) respectively.
At the moment only one type of usage statistics is available, the REST
actions usage. This records the number of times each REST action class is
called and when the nodes usage api is called will return a map of rest
action class name to long representing the number of times each of the action
classes has been called.
Still to do:
* [x] Create usage service to store usage statistics
* [x] Record usage in REST layer
* [x] Add Transport Actions
* [x] Add REST Actions
* [x] Tests
* [x] Documentation
* Rafactors UsageService so counts are done by the handlers
* Fixing up docs tests
* Adds a name to all rest actions
* Addresses review comments
By default, the remove plugin CLI command preserves configuration
files. This is so that if a user is upgrading the plugin (which is done
by first removing the old version and then installing the new version)
they do not lose their configuration file. Yet, there are circumstances
where preserving the configuration file is not desired. This commit adds
a purge option to the remove plugin CLI command.
Relates #24981
Removes the `distribution:bwc` project in favor of
`distribution:bwc-release-snapshot` and
`distribution:bwc-stable-snapshot`.
`distribution:bwc-release-snapshot` builds a snapshot of the
latest release branch (5.4 now) if needed for backwards
compatibility. `distribution:bwc-stable-snapshot` builds a
snapshot of the latest stable branch (5.x now) if needed for
backwards compatibility.
Some packaging tests depend on snapshot versions of packaging
distributions yet the build does not use a repository that includes such
distributions. While we could add such a repository, a better strategy
is to follow our approach for other BWC tests where we depend on a
locally-compiled archive distribution. This commit adds a local
compilation of packaging artifacts and substitutes these anywhere that
we would otherwise depend on a snapshot of these artifacts.
Relates #24861
This commit expands the logic for version extraction from Version.java
to include a list of all versions for backcompat purposes. The tests
using bwcVersion are converted to use this list, but those tests
(rolling upgrade and backwards-5.0) are still not randomized; that will
happen in another followup.
This commit renames all rest test files to use the .yml extension
instead of .yaml. This way the extension used within all of
elasticsearch for yaml is consistent.
We had a hack in setting up permissions for tests to support testing
the lang-python plugin. We also had a hack to prevent Log4j from
loading a shaded version of Jansi provided by Jython. This plugin has
been removed so these hacks are no longer necessary.
Relates #24681
When installing plugin permissions, we try to set the permissions on all
installed files ourselves because a umask from the user could violate
everything needed to get the permissions right. Sadly, directories were
not handled correctly at all and so we were still left with broken
installations with umasks like 0077. This commit fixes this issue, adds
a thorough unit test for the situation, and most importantly, adds a
test that sets the umask before installing the plugin.
Relates #24527
This adds `-XX:-OmitStackTraceInFastThrow` to the JVM arguments
which *should* prevent the JVM from omitting stack traces on
common exception sites. Even though these sites are common, we'd
still like the exceptions to debug them.
This also adds the flag when running tests and adapts some tests
that had workarounds for the absense of the flag.
Closes#24376
This commit fixes an issue when deleting the plugin directory while
executing the remove plugin command. Namely, we take out a file
descriptor on the plugin directory to traverse its contents to obtain
the list of files to delete. We leaked this file descriptor. On
Unix-based filesystems, this is not a problem, deleting the plugin
directory deletes the plugin directory. On Windows though, a delete is
not executed until the last file descriptor is closed. Since we leaked
this file descriptor, the plugin was not actually deleted. This led to
test failures that tried to cleanup left behind temporary directories
but these test failures were just exposing this bug. This commit fixes
this issue by ensuring that we close the file descriptor to the plugin
directory when we are finished with it.
Relates #24266
Today when removing a plugin, we attempt to move the plugin directory to
a temporary directory and then delete that directory from the
filesystem. We do this to avoid a plugin being in a half-removed
state. We previously tried an atomic move, and fell back to a non-atomic
move if that failed. Atomic moves can fail on union filesystems when the
plugin directory is not in the top layer of the
filesystem. Interestingly, the regular move can fail as well. This is
because when the JDK is executing such a move, it first tries to rename
the source directory to the target directory and if this fails with
EXDEV (as in the case of an atomic move failing), it falls back to
copying the source to the target, and then attempts to rmdir the
source. The bug here is that the JDK never deleted the contents of the
source so the rmdir will always fail (except in the case of an empty
directory).
Given all this silliness, we were inspired to find a different
strategy. The strategy is simple. We will add a marker file to the
plugin directory that indicates the plugin is in a state of
removal. This file will be the last file out the door during removal. If
this file exists during startup, we fail startup.
Relates #24252
The plugin cli currently resides inside the elasticsearch jar. This
commit moves it into a plugin-cli jar. This is change alone is a no-op;
it does not change anything about what is loaded at runtime. But it will
allow easier testing (with fixtures in the future to test ES or maven
installation), as well as eventually not loading these classes when
starting elasticsearch.
This change simplifies how the rest test runner finds test files and
removes all leniency. Previously multiple prefixes and suffixes would
be tried, and tests could exist inside or outside of the classpath,
although outside of the classpath never quite worked. Now only classpath
tests are supported, and only one resource prefix is supported,
`/rest-api-spec/tests`.
closes#20240
After splitting integ tests into cluster configuration and the test
runner task, we still have dependencies of the test runner added as deps
of the cluster. This commit adds dependencies directly to the cluster,
so that the runner can have other dependencies independent of what is
needed for the cluster.
The bwc checkout for backcompat tests currently always tries to fetch
the latest from the upstream remote. This change makes fetching from
upstream conditional on not running an offline build.
Adds the option for a plugin to specify extra directories containing notices
and licenses files to be incorporated into the overall notices file that is
generated for the plugin.
This can be useful, for example, where the plugin has a non-Java dependency
that itself incorporates many 3rd party components.
Windows rest tests consistenly fail because the filesystem appears to be
an order of magnitude slower than that of *nix, at least in the context
of our rest tests. This commit overrides the suite timeout to 30 mins
for windows. From past failures, it appears this should be enough, as
the tests seem to fail when they are almost complete. The default suite
timeout for ESTestCase is 20 mins, so this leaves ample buffer for
windows shenanigans.
The LoggedExec task does not capture output when info logging is
enabled. This commit changes the upstream check to use Exec directly,
so as not to break when info logging is enabled.
This will use File.toString() for the `git clone` command, which will
automatically be correct for whatever system the build is running on.
closes#23784
We currently have the last minor version of the previous major hardcoded
in tests like rolling upgrade. This change programatically finds this
during gradle initialization by parsing versions from Version.java.
This commit switches from executing gradle when building the bwc testing
zip through Exec, to using GradleBuild. In addition to not depending on
gradle being in the PATH, it also has the added benefit of much better
logging while the bwc build is going on (the actual tasks show up as
tasks of a subproject within the current build).
The current rest backcompat tests, which run against a mixed cluster of
5.x and 6.0 nodes, depend on snapshot builds of 5.x. However, this has
the potential for inconsistency that results in CI failures, and happens
quite often, whenever some backcompat logic is added to 5.x, but the bwc
test on master fails because the 5.x code has not yet been published as
a snapshot.
This change creates a git clone of the 5.x branch,
builds the zip distribution, and ties that into gradle substitutions for
the 5.x version.
After the removal of the joda time hack we used to have, we can cleanup
the codebase handling in security, jarhell and plugins to be more picky
about uniqueness. This was originally in #18959 which was never merged.
closes#18959
Gradle's finalizedBy on tasks only ensures one task runs after another,
but not immediately after. This is problematic for our integration tests
since it allows multiple project's integ test clusters to be
simultaneously. While this has not been a problem thus far (gradle 2.13
happened to keep the finalizedBy tasks close enough that no clusters
were running in parallel), with gradle 3.3 the task graph generation has
changed, and numerous clusters may be running simultaneously, causing
memory pressure, and thus generally slower tests, or even failure if the
system has a limited amount of memory (eg in a vagrant host).
This commit reworks how integ tests are configured. It adds an
`integTestCluster` extension to gradle which is equivalent to the current
`integTest.cluster` and moves the rest test runner task to
`integTestRunner`. The `integTest` task is then just a dummy task,
which depends on the cluster runner task, as well as the cluster stop
task. This means running `integTest` in one project will both run the
rest tests, and shut down the cluster, before running `integTest` in
another project.
This commit enforces the requirement of Content-Type for the REST layer and removes the deprecated methods in transport
requests and their usages.
While doing this, it turns out that there are many places where *Entity classes are used from the apache http client
libraries and many of these usages did not specify the content type. The methods that do not specify a content type
explicitly have been added to forbidden apis to prevent more of these from entering our code base.
Relates #19388
Today when users start Elasticsearch with their Java configuration
pointing to a pre-Java 8 install, they encounter a cryptic message:
Exception in thread "main" java.lang.UnsupportedClassVersionError:
org/elasticsearch/bootstrap/Elasticsearch : Unsupported major.minor
version 52.0
They often think that they have Java 8 installed but if their JAVA_HOME
or other configuration is causing them to start with a pre-Java 8
install, this error message does not help them.
We introduce a Java version checker that runs on Java 6 as part of the
startup scripts. If the Java version is pre-Java 8, we can display a
helpful error message to the user informing them of the Java version
that the runtime was started with. Otherwise, Elasticsearch starts as it
does today.
This change adds a strict mode for xcontent parsing on the rest layer. The strict mode will be off by default for 5.x and in a separate commit will be enabled by default for 6.0. The strict mode, which can be enabled by setting `http.content_type.required: true` in 5.x, will require that all incoming rest requests have a valid and supported content type header before the request is dispatched. In the non-strict mode, the Content-Type header will be inspected and if it is not present or not valid, we will continue with auto detection of content like we have done previously.
The content type header is parsed to the matching XContentType value with the only exception being for plain text requests. This value is then passed on with the content bytes so that we can reduce the number of places where we need to auto-detect the content type.
As part of this, many transport requests and builders were updated to provide methods that
accepted the XContentType along with the bytes and the methods that would rely on auto-detection have been deprecated.
In the non-strict mode, deprecation warnings are issued whenever a request with body doesn't provide the Content-Type header.
See #19388
By default, the JVM GC log file grows without
limitation. This is inconvenient for a long running
process like Elasticsearch.
With this commit we add an example configuration
for a rotating GC log in `conig/jvm.options`.
For certain situations, end-users need the base path for Elasticsearch
logs. Exposing this as a property is better than hard-coding the path
into the logging configuration file as otherwise the logging
configuration file could easily diverge from the Elasticsearch
configuration file. Additionally, Elasticsearch will only have
permissions to write to the log directory configured in the
Elasticsearch configuration file. This commit adds a property that
exposes this base path.
One use-case for this is configuring a rollover strategy to retain logs
for a certain period of time. As such, we add an example of this to the
documentation.
Additionally, we expose the property es.logs.cluster_name as this is
used as the name of the log files in the default configuration.
Finally, we expose es.logs.node_name in cases where node.name is
explicitly set in case users want to include the node name as part of
the name of the log files.
Relates #22625
The config template that ships with Elasticsearch distributions contains
links to various pieces of documentation. Links go out of date and get
broken. This commit removes such links from the config template.
Relates #22553
This commit reverts switching to the unpooled allocator (for now) to let
some benchmarks run to see if this is the source of an increase in GC
times.
Relates #22452
Right now closing a shard looks like it strands refresh listeners,
causing tests like
`delete/50_refresh/refresh=wait_for waits until changes are visible in search`
to fail. Here is a build that fails:
https://elasticsearch-ci.elastic.co/job/elastic+elasticsearch+multi_cluster_search+multijob-darwin-compatibility/4/console
This attempts to fix the problem by implements `Closeable` on
`RefreshListeners` and rejecting listeners when closed. More importantly
the act of closing the instance flushes all pending listeners
so we shouldn't have any stranded listeners on close.
Because it was needed for testing, this also adds the number of
pending listeners to the `CommonStats` object and all API to which
that flows: `_cat/nodes`, `_cat/indices`, `_cat/shards`, and
`_nodes/stats`.
Netty plays a lot of games with recycling byte buffers in thread local
caches, and using a pooled byte buffer allocator to reduce pressure on
the garbage collector.
The recycler in particular appears to be fraught with peril. It appears
that there are circumstances where the recycler does not recycle quickly
enough and can exceed its capacity leading to heap exhaustion and out of
memory errors. If you spend a few minutes reading the history of the
recycler on the Netty GitHub issues, it appears it has been nothing but
a source of trouble, and the project itself has an open issue that
proposes disabling by default and possibly even removing the recycler.
The pooled byte buffer allocator has problems itself. It sizes the pool
based on the number of runtime processors and can indeed grab a very
large percentage of the heap (in some cases 50% or more). Additionally,
the Netty project continues to struggle with leaks here.
We are seeing users struggle with issues in 5.x that I think are largely
driven by some of the problems here with Netty.
This change proposes to disable the recycler, and to disable the pooled
byte buffer allocator. I think that disabling these features will return
some of the stablity that these features appear to be losing us.
I have done performance testing on my workstation with disabling these
and I do not see a difference in performance. I propose that we make
this change in master and let some nightly benchmarks run to confirm
that there is not a difference in performance. If we are comfortable
with the performance changes, I propose backporting this to all active
branches.
Relates #22452
This change is the first towards providing the ability to store
sensitive settings in elasticsearch. It adds the
`elasticsearch-keystore` tool, which allows managing a java keystore.
The keystore is loaded upon node startup in Elasticsearch, and used by
the Setting infrastructure when a setting is configured as secure.
There are a lot of caveats to this PR. The most important is it only
provides the tool and setting infrastructure for secure strings. It does
not yet provide for keystore passwords, keypairs, certificates, or even
convert any existing string settings to secure string settings. Those
will all come in follow up PRs. But this PR was already too big, so this
at least gets a basic version of the infrastructure in.
The two main things to look at. The first is the `SecureSetting` class,
which extends `Setting`, but removes the assumption for the raw value of the
setting to be a string. SecureSetting provides, for now, a single
helper, `stringSetting()` to create a SecureSetting which will return a
SecureString (which is like String, but is closeable, so that the
underlying character array can be cleared). The second is the
`KeyStoreWrapper` class, which wraps the java `KeyStore` to provide a
simpler api (we do not need the entire keystore api) and also extend
the serialized format to add metadata needed for loading the keystore
with no assumptions about keystore type (so that we can change this in
the future) as well as whether the keystore has a password (so that we
can know whether prompting is necessary when we add support for keystore
passwords).
* Remove a checked exception, replacing it with `ParsingException`.
* Remove all Parser classes for the yaml sections, replacing them with static methods.
* Remove `ClientYamlTestFragmentParser`. Isn't used any more.
* Remove `ClientYamlTestSuiteParseContext`, replacing it with some static utility methods.
I did not rewrite the parsers using `ObjectParser` because I don't think it is worth it right now.
A previous fix for the handling of paths on Windows related to paths
containing multiple spaces introduced a issue where if JAVA_HOME ends
with a backslash, then Elasticsearch will refuse to start. This is not a
critical bug as a workaround exists (remove the trailing backslash), but
should be fixed nevertheless. This commit addresses this situation while
not regressing the previous fix.
Relates #22132
This commit fixes the handling of spaces in Windows paths. The current
mechanism works fine in a path that contains a single space, but fails
on a path that contains multiple spaces. With this commit, that is no
longer the case.
Relates #21921
Elasticsearch can be run in a few different ways:
- from the command line on Linux and Windows
- as a service on Linux and Windows
on both 32-bit client and 64-bit server VMs. We strive for a great
out-of-the-box experience any of these combinations but today it is
lacking on 32-bit client JVMs and on the Windows service. There are two
deficiencies that arise:
- on any 32-bit client JVM we fail to start out of the box because we
force the server JVM in jvm.options
- when installing the Windows service, the thread stack size must be
specified in jvm.options
This commit attempts to address these deficiencies.
We should continue to force the server JVM because there are systems
where the server JVM is not active by default (e.g., the 32-bit JDK on
Windows). This does mean that if a user tries to run with a client JVM
they will see a failure message at startup but this is the best that we
can do if we want to continue to force the server JVM. Thus, this commit
at least documents this situation.
To improve the situation with installing the Windows service, this
commit adds a default setting for the thread stack size. This default is
chosen based on the default thread stack size across all 64-bit server
JVMs. This means that if a user tries to run with a 32-bit JVM they
could otherwise see significantly higher memory usage (this situation is
complicated, it's really only on Windows where the extra memory usage is
egregious, but cutting into the 32-bit address space on any system is
bad). So this commit makes it so that the out-of-the-box experience is
improved for the Windows service on 64-bit server JVMs and we document
the need to adjust this setting on 32-bit JVMs.
Again, we are focusing on the out-of-the-box experience here and this
means optimizing for the best experience on any 64-bit server JVM as
this covers the vast majority of the user base. The users that are on
32-bit JVMs will suffer a little bit but at least now any user on any
64-bit server JVM can start Elasticsearch out of the box.
Finally, we fix some references to the jvm.options documentation.
Relates #21920
During package install on systemd-based systems, we try to set
vm.max_map_count. On some systems (e.g., containers), users do not have
the ability to tune these parameters from within the container. This
commit provides an option for these users to skip setting such kernel
parameters.
Relates #21899
Our default pattern layout truncates log messages. This is to avoid
blowing disk space from excessively log messages, which can happen if a
message contains a mapping or an large query. Yet, we trunacte from the
beginning which is probably where the most germane information is. This
commit modifies the default pattern layout to trunacte from the end.
Relates #21609
Adds a version constant for it, bwc indices, and a vagrant upgrade-from
version. Also bumps the "upgrade from" version for the backwards-5.0
test and adds `skip`s for tests that don't fail against 5.0 so we skip
them during the backwards testing.
Finally, this skips the "Shrink index via API" test because it fails
consistently for me. Inconsistently for CI, but consistently for me.
I'll work on making it consistent tomorrow.
On some systems these utilities are in /usr/lib/systemd/systemd-sysctl
and /usr/sbin/sysctl, and on others the /usr is dropped. This commit
accounts for that fact.
Our docs claim that we set vm.max_map_count automatically. This is not
quite the case. The story is that on SysV init we set vm.max_map_count
each time the service starts, which is good. On systemd, we create a
sysctl.d conf file that sets vm.map_max_count, but this is only
meaningful if the system is rebooted after package install. This commit
modifies the post-install script so that we run systemd-sysctl so that
the vm.max_map_count change occurs after package install without a
reboot.
Relates #21507
Given that the default is now 1, the comment in the config file was outdated. Also considering that the default value is production ready, we shouldn't list it among the values that need attention when going to production.
Relates to #19964
The environment variable ES_JVM_OPTIONS allows end-users to specify a
custom location for the jvm.options file. Unfortunately, this
environment variable is not exported from the SysV init scripts. This
commit addresses this issue, and includes a test that ES_JVM_OPTIONS and
ES_JAVA_OPTS work for the SysV init packages.
Relates #21445
All plugins currently have their own licenses dir for the
dependencyLicenses task, but core disables this and has the check inside
distribution. This may have been better for maven, but for
gradle it makes more sense to just use the dependencyLicenses task that
automatically exists inside :core, and remove the hacked up version that
is inside distribution.
At one point in the past when moving out the rest tests from core to
their own subproject, we had multiple test classes which evenly split up
the tests to run. However, we simplified this and went back to a single
test runner to have better reproduceability in tests. This change
removes the remnants of that multiplexing support.
On ubuntu 14.04, which uses upstart, where as our debian package uses
sysvinit, there is no stdout/stderr message printed when starting up,
because the start-stop-daemon swallows it.
As Elasticsearch is started to daemonize, we can remove the background
flag from the start-stop-daemon and thus see, if the system does not have
enough memory for starting up - something that happens often on VMs, since
Elasticsearch 5.0 uses 2gb by default instead of one.
Relates #21300
Relates #12716
Today when running gradle clean
:distribution:(integ-test-zip|tar|zip):assemble, the created archive
distribution will be missing the empty plugins directory. This is
because the empty plugins folder created in the build folder for the
copy spec task is created during configuration and then is later wiped
away by the clean task. This commit addresses this issue, by pushing
creation of the directory out of the configuration phase.
Relates #21271
Today when installing Elasticsearch from an archive distribution (tar.gz
or zip), an empty plugins folder is not included. This means that if you
install Elasticsearch and immediately run elasticsearch-plugin list, you
will receive an error message about the plugins directory missing. While
the plugins directory would be created when starting Elasticsearch for
the first time, it would be better to just include an empty plugins
directory in the archive distributions. This commit makes this the
case. Note that the package distributions already include an empty
plugins folder.
Relates #21204
When installing the Windows service, certain settings like the minimum
heap, maximum heap and thread stack size setting must be set. While
there is an error message making mention of this fact, the error message
is not explicit exactly what setting needs to be set. This commit makes
these settings explicit.
Relates #21200
Lucene 6.3 is expected to be released in the next weeks so it'd be good to give
it some integration testing. I had to upgrade randomized-testing too so that
both Lucene and Elasticsearch are on the same version.
This commit fixes responses to HEAD requests so that the value of the
Content-Length is correct per the HTTP spec. Namely, the value of this
header should be equal to the Content-Length if the request were not a
HEAD request.
This commit also fixes a memory leak on HEAD requests to the main action
that arose from the bytes on a builder not being released due to them
being dropped on the floor to ensure that the response to the main
action did not have a body.
Relates #21123
Before this commit `curl -XHEAD localhost:9200?pretty` would return
`Content-Length: 1` and a body which is fairly upsetting to standards
compliant tools. Now it'll return `Content-Length: 0` with an empty
body like every other `HEAD` request.
Relates to #21075
This commit upgrades the Log4j 2 dependency to version 2.7 and removes
some hacks that we had in place to work around bugs in Log4j 2 version
2.6.2.
Relates #20805
We have a "HUGE HACK" that allows us to publish zip artifacts to
Sonatype's OSS repository without javadoc and source jars. We don't
include those jars because the zip is just a repackaging of the
core and module jars for which we already publish the javadoc and
source jars. So we have a hack to publish the zip artifact when the
pom says the project is of type 'pom'.
I'm not sure why we need this pom instead of the pom generated by
nebula, but if we are going to have it then we need to populate it
with appropriate stuff like project name, description, and url.
* Build: Remove old maven deploy support
This change removes the old maven deploy that we have in parallel to
maven-publish, and makes maven-publish fully work with publishing to
maven local. Using `gradle publishToMavenLocal` should be used to
publish to .m2.
Note that there is an unfortunate hack that means for
zip artifacts we must first create/publish a dummy pom file, and then
follow that with the real pom file. It would be nice to have the pom
file contains packaging=zip, but maven central then requires sources and
javadocs. But our zips are really just attached artifacts, so we already
set the packaging type to pom for our zip files. This change just works
around a limitation of the underlying maven publishing library which
silently skips attached artifacts when the packaging type is set to pom.
relates #20164closes#20375
* Remove unnecessary extra spacing
Currently we always pass -E to the the plugin cli with the conf dir, but
this causes a very confusing error message when not giving a specific
command to the plugin cli. This change makes path.conf pass just like
path.home. These are special settings, so passing via sysprops is the
right thing to do (it is all about how we pass between shell and java
cli).
closes#18689
When uninstalling or upgrading elasticsearch using the RPM package some empty directories remain on the filesystem:
/usr/share/elasticsearch/bin
/usr/share/elasticsearch/lib
/usr/share/elasticsearch/modules
/usr/share/elasticsearch/modules/foo
Having empty directories in modules can prevent elasticsearch to start after an upgrade: the plugins service expects to find a plugin-descriptor.properties file in every sub directory of modules.
This PR cleans things a bit so that these empty directories are removed on upgrade/removal like it was in 2.x.
When upgrading elasticsearch using the RPM package, the scripts directory is removed if it's empty but it won't be recreated by the upgraded package. But after that the service won't start because the scripts dir is missing.
This commit modifies the logger names within Elasticsearch to be the
fully-qualified class name as opposed removing the org.elasticsearch
prefix and dropping the class name. This change separates the root
logger from the Elasticsearch loggers (they were equated from the
removal of the org.elasticsearch prefix) and enables log levels to be
set at the class level (instead of the package level).
Relates #20457
Today we add a prefix when logging within Elasticsearch. This prefix
contains the node name, and index and shard-level components if
appropriate.
Due to some implementation details with Log4j 2 , this does not work for
integration tests; instead what we see is the node name for the last
node to startup. The implementation detail here is that Log4j 2 there is
only one logger for a name, message factory pair, and the key derived
from the message factory is the class name of the message factory. So,
when the last node starts up and starts setting prefixes on its message
factories, it will impact the loggers for the other nodes.
Additionally, the prefixes are lost when logging an exception. This is
due to another implementation detail in Log4j 2. Namely, since we log
exceptions using a parameterized message, Log4j 2 decides that that
means that we do not want to use the message factory that we have
provided (the prefix message factory) and so logs the exception without
the prefix.
This commit fixes both of these issues.
Relates #20429
This commit adds a -q/--quiet option to Elasticsearch so that it does not log anything in the console and closes stdout & stderr streams. This is useful for SystemD to avoid duplicate logs in both journalctl and /var/log/elasticsearch/elasticsearch.log while still allows the JVM to print error messages in stdout/stderr if needed.
closes#17220
The Elasticsearch startup scripts contain checks for the presence of
support for environment variables that were removed in the 5.x
series. These checks warn the user and fail the script if any of the
unsupported environment variables are present. This was provided as
migration step from 2.x to 5.x so that we were not just silently
ignoring environment variables that were previously set. This commit
removes these checks, as upgrades from 2.x to 6.x are not supported.
Relates #20404
Previous versions of Elasticsearch permitted unquoted JSON field names even though this is against the JSON spec. This leniency was disabled by default in the 5.x series of Elasticsearch but a backwards compatibility layer was added via a system property with the intention of removing this layer in 6.0.0. This commit removes this backwards compatibility layer.
Relates #20388
-D parameters used to be allowed when starting elasticsearch scripts.
However, this was removed in #18207, but the elasticsearch-plugin.bat script
was forgotten. This change removes the -D handling.
Jython shades `jansi` into it's classpath without changing it's package or
anything like that. This causes attempts to load native code on windows which
blows up tests. This change adds `log4j.skipJansi=true` system property to our
tests as well as to the JVM properties we set.
This commit configures the deprecation logs to be size-limited to 1 GB,
and compress these logs when they roll. The default configuration will
preserve up to four rolled logs.
Relates #20287
The integ-test-zip distribution did not specify a value for
path.conf. As such, it picked up the default value of
/etc/elasticsearch. This means that on machines that have this
directory, integration tests could fail because they would try to pick
up configuration from that directory rather than from the home directory
of the exploded distribution. This commit fixes this issue by specifying
a value of path.conf for the integ-test-zip distribution.
Relates #20271
* master:
Increase visibility of deprecation logger
Skip transport client plugin installed on JDK 9
Explicitly disable Netty key set replacement
percolator: Fail indexing percolator queries containing either a has_child or has_parent query.
Make it possible for Ingest Processors to access AnalysisRegistry
Allow RestClient to send array-based headers
Silence rest util tests until the bogusness can be simplified
Remove unknown HttpContext-based test as it fails unpredictably on different JVMs
Tests: Improve rest suite names and generated test names for docs tests
Add support for a RestClient base path
The deprecation logger is an important way to make visible features of
Elasticsearch that are deprecated. Yet, the default logging makes the
log messages for the deprecation logger invisible. We want these log
messages to be visible, so the default logging for the deprecation
logger should enable these log messages. This commit changes the log
level of deprecation log message to warn, and configures the deprecation
logger so that these log messages are visible out of the box.
Relates #20254
Netty replaces the backing set for the selector implementation. The
value of doing this is questionable, and doing this requires permissions
that we are not going to grant. This commit explicitly disables this
optimization rather than relying on it failing due to lack of
permissions.
Relates #20249
the setting in elasticsearch.yml, so that when a user uncomments
out a setting by just removing the #, the setting actually
takes effect. Before, it was very easy to uncomment out a
setting by just removing the #, leaving a single whitespace
character before the setting name, which would cause the
setting to not get picked up by Elasticsearch.
Closes#20090
This commit sets the default min heap equal to the default max
heap. This is to align the default out-of-box settings with the heap
size bootstrap check.
This commit fixes the handling of spaces in the path to the jvm.options
file on Windows. The issue is that the extraneous set of quotes were
included as part of the value of ES_JVM_OPTIONS thus confusing further
downstream commands.
Relates #19951
This commit updates Jackson to the 2.8.1 version, which is more strict when it comes to build objects. It also adds the snakeyaml dependency that was previously shaded in jackson libs.
It also closes#18076
With the security permissions that we grant to Netty, Netty can not
access unsafe (because it relies on having the runtime permission
accessDeclaredMembers and the reflect permission
suppressAccessChecks). Instead, we should just explicitly tell Netty to
not use unsafe. This commit adds a flag to the default jvm.options to
tell Netty to not look for unsafe.
Relates #19786
This makes it obvious that these tests are for running the client yaml
suites. Now that there are other ways of running tests using the REST
client against a running cluster we can't go on calling the shared
client yaml tests "REST tests". They are rest tests, but they aren't
**the** rest tests.
This adds the `bin/elasticsearch-translate` bin file that will be used
for CLI tasks pertaining to Elasticsearch. Currently it implements only
a single sub-command, `truncate-translog`, that creates a truncated
translog for a given folder.
Here's what running the tool looks like:
```
λ bin/elasticsearch-translog truncate -d data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/
Checking existing translog files
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
! WARNING: Elasticsearch MUST be stopped before running this tool !
! !
! WARNING: Documents inside of translog files will be lost !
! !
! WARNING: The following files will be DELETED! !
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-10.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-18.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-21.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-12.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-25.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-29.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-2.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-5.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-41.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-6.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-37.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-24.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-11.ckp
Continue and DELETE files? [y/N] y
Reading translog UUID information from Lucene commit from shard at [data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/index]
Translog Generation: 3
Translog UUID : AxqC4rocTC6e0fwsljAh-Q
Removing existing translog files
Creating new empty checkpoint at [data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog.ckp]
Creating new empty translog at [data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-3.tlog]
Done.
```
It also includes a `-b` batch operation that can be used to skip the
confirmation diaglog.
Resolves#19123
This adds a header that looks like `Location: /test/test/1` to the
response for the index/create/update API. The requirement for the header
comes from https://www.w3.org/Protocols/rfc2616/rfc2616-sec10.htmlhttps://tools.ietf.org/html/rfc7231#section-7.1.2 claims that relative
URIs are OK. So we use an absolute path which should resolve to the
appropriate location.
Closes#19079
This makes large changes to our rest test infrastructure, allowing us
to write junit tests that test a running cluster via the rest client.
It does this by splitting ESRestTestCase into two classes:
* ESRestTestCase is the superclass of all tests that use the rest client
to interact with a running cluster.
* ESClientYamlSuiteTestCase is the superclass of all tests that use the
rest client to run the yaml tests. These tests are shared across all
official clients, thus the `ClientYamlSuite` part of the name.
Some tests still start http implicitly or miss configuring the transport clients correctly.
This commit fixes all remaining tests and adds a depdenceny to `transport-netty` from
`qa/smoke-test-http` and `modules/reindex` since they need an http server running on the nodes.
This also moves all required permissions for netty into it's module and out of core.
Today in the packaging removal scripts, we disable the service in
post-uninstall. Yet, this happens after service files have been
erased. On some systems, this can cause the service disable to fail
leaving behind state causing the service to be enabled on subsequent
installs. This commit moves the service disabling to the pre-uninstall
script to prevent this issue.
Relates #19328
Today when a thread encounters a fatal unrecoverable error that
threatens the stability of the JVM, Elasticsearch marches on. This
includes out of memory errors, stack overflow errors and other errors
that leave the JVM in a questionable state. Instead, the Elasticsearch
JVM should die when these errors are encountered. This commit causes
this to be the case.
Relates #19272
This commit updates the SHA for the JNA dependency. The JNA dependency
was upgraded from version 4.1.0 to version 4.2.2 in commit
7f10174362 but the SHA was not updated.
Unless explicitly disabled, the parallel new collector is enabled
automatically as soon as the CMS collector is enabled:
void Arguments::set_cms_and_parnew_gc_flags() {
assert(
!UseSerialGC && !UseParallelOldGC && !UseParallelGC,
"Error");
assert(UseConcMarkSweepGC, "CMS is expected to be on here");
// If we are using CMS, we prefer to UseParNewGC,
// unless explicitly forbidden.
if (FLAG_IS_DEFAULT(UseParNewGC)) {
FLAG_SET_ERGO(bool, UseParNewGC, true);
}
While it's fine to be explicit, the UseParNewGC flag is deprecatd in JDK
8 and produces warning messages in JDK 9:
Java HotSpot(TM) 64-Bit Server VM warning: Option UseParNewGC was
deprecated in version 9.0 and will likely be removed in a future
release.
Thus, we can and should just remove this flag from the default JVM
options.
Relates #18767
The setting bootstrap.mlockall is useful on both POSIX-like systems
(POSIX mlockall) and Windows (Win32 VirtualLock). But mlockall is really
a POSIX only thing so the name should not be tied POSIX. This commit
renames the setting to "bootstrap.memory_lock".
Relates #18669
Recent changes adds an extra bin/ directory that contains Windows bat files in the normal Bin folder of elasticsearch. For exemple the script elasticsearch.bat is located in bin/bin/elasticsearch.bat instead of bin/elasticsearch.bat.
The distributions had their own copies of these extra files, which was a
carry over from maven. This change removes the duplicate files and
copies them from the root of the project.
closes#18597
This change tweaks the metadata version associated with the deb and rpm
packages. For rpm, dashes are allowed in versions, so we can use the
version as it already exists. For rpm, dashes are not allowed, so this
uses underscores instead. This only affects prerelease versions (eg
alpha/beta/rc), and usually someone doesn't specify the version, so the
inconsistency doesn't matter that much.
The default jvm.options file ships with the -server flag to force the
server VM on systems where the server VM is not the default. However,
the method of starting the JVM via the Windows service does not support
the command-line flags for selecting the VM because it starts from a
DLL that is specific to the server or client VM. Thus, we need to
filter these options from the jvm.options configuration file when
installing the Windows service.
Relates #18473
Today when parsing settings during bootstrap, we add a system property
for every Elasticsearch setting. Additionally, settings can be set via
system properties. This commit simplifies this situation.
- settings are no longer propogated to system properties
- system properties can not be used to set settings
- the "es." prefix on settings is no longer required (nor permitted)
- test logging has a dedicated system property (tests.logger.level)
Relates #18198
This change makes `gradle run` use the full zip distribution. Arguably
we could make it do the same when run inside plugins, but I started out
with this simple change. I am open to moving it into the RunTask itself
so that plugins will do this as well.
After considerable discussion, we have elected to set the default min
heap to 256m and the default max heap to 2g. This is to balance the
desire for a good out-of-the-box performance experience (default max
heap of 2g) with a good out-of-the-box experience running on machines
with limited resources or running multiple instances on a single modern
developer laptop (default min heap of 1g).
Benchmarking with the geonames data set shows that Elasticsearch truly
needs 2g of heap or the heap is a bottleneck for indexing rates. If our
goal is to satisfy the out-of-the-box-experience, we should prioritize
the out-of-the-box performance experience. Thus, the default heap should
be 2g until smaller heaps are not the bottleneck for indexing small data
sets.
This commit fixes the Debian package requires clause for bash. For the
RPM it is okay to specify the binary, but for the Debian package the
package name must be specified.
Today we encourage users to set their minimum and maximum heap settings
equal to each other to prevent the heap from resizing. Yet, the default
heap settings do not start Elasticsearch in this fashion. This commit
addresses this discrepancy by setting the default min heap to '512m' and
the default max heap to the default min heap.
Relates #16334
This commit adds a hard requirement to the RPM and Debian packages for
/bin/bash to be present, and adds a note regarding this to the migration
docs.
Relates #18259
In the plugin script we set the setting default.path.conf to control the
path to the configuration file. But the default directory might not
exist in which case we can run into exceptions. This commit restores a
guard against this directory not existing.
This commit switches the command-line scripts to use bash instead of sh
so that we can take advantage of features that bash provides like
arrays.
Relates #18251
In 7d1fd17172 the parsing of command-line
properties in the plugin script was removed. That commit missed
additional parsing of the properties for es.default.path.conf. This
commit removes that parsing and also replaces the use of eval with exec.
Relates #18239
The plugin script parses command-line options looking for Java system
properties and extracts these arguments to pass to the java command when
starting the JVM. Since elasticsearch-plugin allows arbitrary user
arguments to the JVM via ES_JAVA_OPTS, this parsing is unnecessary. This
commit removes this unnecessary
Relates #18207
In preparation for a unified release process, we need to be able to
generate the pom files independently of trying to actually publish. This
change adds back the maven-publish plugin just for that purpose. The
nexus plugin still exists for now, so that we do not break snapshots,
but that can be removed at a later time once snapshots are happenign
through the unified tools. Note I also changed the dir jars are written
into so that all our artifacts are under build/distributions.
Today we softly warn about running with the client VM. However, we
should really refuse to start in production mode if running with the
client VM as the performance of the client VM is too devastating for a
server application. This commit adds an option to jvm.options to ensure
that we are starting with the server VM (on all 32-bit non-Windows
platforms on server-class machines (2+ CPUs, 2+ GB physical RAM) this is
the default and on all 64-bit platforms this is the only option) and
adds a bootstrap check for the client VM.
Relates #18155
Today we specify the client option for the JVM when executing plugin
commands. Yet, this option does nothing on a 64-bit capable JDK as such
JDKs always select the Hotspot server VM. And for 32-bit JDKs, running
plugin commands with the server VM is okay. Thus, we should just remove
this unnecessary flag and just let the default VM be selected.
Relates #18142
The RPM init script did not include the check for `bin/elasticsearch` being
executable. This fix adds this checks and makes the tests pass.
This fixes the init script, so the tests pass on centos-6 again.
Today when restarting Elasticsearch using the start-stop-daemon on
Debian-based systems using System V init, we sleep for one second
between the process successfully stopping and starting the process
again. This sleep is unnecessary as the stop function retries forever
until the previous instance successfully terminates. This commit removes
that unncessary sleep.
Relates #17966
Exit with proper exit code (1) and an error message if elasticsearch
executable binary does not exists or has insufficient permissions to
execute.
Squashed commit of the following:
commit 9768d316303418ba4f9c96d3f87c376048a1b1bc
Author: Puru <tuladharpuru@gmail.com>
Date: Fri Apr 22 23:26:47 2016 +0545
Fixed ES_HOME typo
commit 79a2b0394297f8b02b6f71b71ba35ff79f1a684e
Author: Puru <tuladharpuru@gmail.com>
Date: Sun Apr 10 11:00:24 2016 +0545
Improve elasticsearch startup script test
Added improvement as per conversation in https://github.com/elastic/elasticsearch/pull/17082#issuecomment-206459613
commit 7be38e1fefd4baa6ccdbdc14745c00f6dc052e0c
Author: Puru <tuladharpuru@gmail.com>
Date: Wed Mar 23 13:23:52 2016 +0545
Add elasticsearch startup script test
The test ensures that elasticsearch startup script exists and is executable.
commit d10eed5c08260fa9c158a4487bbb3103a8d867ed
Author: Puru <tuladharpuru@gmail.com>
Date: Wed Mar 23 12:30:25 2016 +0545
Fixed IF syntax and failure message
commit 6dc66f616545572485b4d43bee05a4cbbf1bed72
Author: Puru <tuladharpuru@gmail.com>
Date: Sat Mar 12 11:08:11 2016 +0545
Fix exit code
Exit with proper exit code (1) and an error message if elasticsearch executable binary does not exists or has insufficient permissions to execute.
This changes our packaging to be explicit about the permissions of files
and directories in the tar.gz, rpm, and deb packages. This is to protect
against a user having an incorrectly set umask when installing.
Additionally, plugins that are installed now have their permissions set
by the plugin installation so that plugins that may have been packaged
with incorrect permissions are secured.
Resolves#17634
In Elasticsearch 5.0.0, by default unquoted field names in JSON will be
rejected. This can cause issues, however, for documents that were
already indexed with unquoted field names. To alleviate this, a system
property has been added that can be enabled so migration can occur.
This system property will be removed in Elasticsearch 6.0.0
Resolves#17674
This allows for a local file based deploy without needed nexus
auth information.
Also signing of packages has been added, either via gradle.properties
or using system properties as a fallback.
The property build.repository allows to configure another endpoint if no
snapshot build is done.
Fix creation of .asc file for tar.gz distribution
Closes#17405
This commit simplifies the default JVM options that ship with
Elasticsearch. In particular, expert settings that were previously
configurable via environment variables have been removed from the
default configuration file. Further, the heap size settings have been
moved to the top of the file with a clearer message that is in
concordance with their importance.
Closes#17714
This commit sets the bad_env_var to a default value of 0 so that in case
no bad environment variables are encountered the variable is still
defined and does not later cause a parse error in the execution of these
batch files.
Relates #17675
JAVA_OPTS is not a built-in mechanism for passing options to the JVM but
many people think that it is. We do not respect JAVA_OPTS, but this
commit adds a warning if it is set in case the end-user thinks that it
will affect Elasticsearch.
This commit renames the function that parses JVM options in
bin/elasticsearch from jvm_options to parse_jvm_options. The reason for
the rename is because a for-loop variable was shadowing the name of this
function and changing the function name further clarifies the purpose of
the function.
This commit fixes the placement of a comment in bin/elasticsearch. The
comment was made out of place by the addition of a function definition
but order is restored.
This commit adds a new configuration file jvm.options to centralize and
simplify management of JVM options. This separates the configuration of
the JVM from the packaging scripts (bin/elasticsearch*, bin/service.bat,
and init.d/elasticsearch) simplifying end-user operational management of
custom JVM options.
* upgrades numerics to new Point format
* updates geo api changes
* adds GeoPointDistanceRangeQuery as XGeoPointDistanceRangeQuery
* cuts over to ES GeoHashUtils
This commit quotes the variable that contains the path to the java
binary. Without these quotes, when the arguments to eval are evaluated
the existing quotes will be removed leading to unquoted use of the path
to the java binary. If this path contains spaces, evaluation will fail.
Jason Tedor
Nik Everett
David Roberts
jaymode
Christian Hofstaedtler
Colin Goodheart-Smithe
Ryan Ernst
Russ Cam
Lee Hinman
Jay Modi
Daniel Mitterdorfer
javanna
David Pilato
Yannick Welsch
Luca Cavanna
Alexander Reelsen
Adrien Grand
Tanguy Leroux
gfyoung
Simon Willnauer
Mike McCandless
Ali Beyad
Clinton Gormley
Simon Willnauer
Stefan Scherer
Radovan Ondas
Danilo Vaz
Daniil Penkin
Lee Hinman
Joe Hillenbrand