This commit adds troubleshooting section for Kerberos.
Most of the times the problems seen are caused due to invalid
configurations like keytab missing principals or credentials
not up to date. Time synchronization is an important part for
Kerberos infrastructure and the time skew can cause problems.
To debug further documentation explains how to enable JAAS
Kerberos login module debugging and Kerberos/SPNEGO debugging
by setting JVM system properties.
There are two problems with the scheduler engine today. Both relate to
listeners that throw.
The first problem is that any triggered listener that throws a plain old
exception will cause no additional listeners to be triggered for the
event, and will also cause the scheduler to never be invoked again. This
leads to lost events and is bad.
The second problem is that any triggered listener that throws an error
of the fatal kind will not lead to that error because caught by the
uncaught exception handler. This is because the triggered listener is
executed as a future task under a scheduled thread pool executor. A
throwable there goes caught by the JDK framework and set as the outcome
on the future task. Since we never inspect these tasks for their
outcomes, nor is there a good place to do this, we have to handle these
errors ourselves. To do this, we catch them and dispatch them to the
uncaught exception handler via a forked thread. This is similar to our
handling in Netty.
* HLRC: Adding ML Close Job API
HLRC: Adding ML Close Job API
* reconciling request converters
* Adding serialization tests and addressing PR comments
* Changing constructor order
Machine learning has baked a remote license checker for use in checking
license compatibility of a remote license. This remote license checker
has general usage for any feature that relies on a remote cluster. For
example, cross-cluster replication will pull changes from a remote
cluster and require that the local and remote clusters have platinum
licenses. This commit generalizes the remote cluster license check for
use in cross-cluster replication.
Subclasses of `EsIntegTestCase` run multiple Elasticsearch nodes in the
same JVM and when we log we look at the name of the thread to figure out
the node name. This makes sure that all calls to `daemonThreadFactory`
include the node name.
Closes#32574
I'd like to follow this up with more drastic changes that make it
impossible to do this incorrectly but that change is much larger than
this and I'd like to get these log lines fixed up sooner rather than
later.
This commit adds documentation for configuring Kerberos realm.
Configuring Kerberos realm documentation highlights important
terminology and requirements before creating Kerberos realm.
Most of the documentation is centered around configuration from
Elasticsearch rather than go deep into Kerberos implementation.
Kerberos realm settings are mentioned in the security settings
for Kerberos realm.
When a list/an array of cron expressions is provided, and one of those addresses
is already expired, the expired one will be considered as an option
instead of the valid next one.
This commit also reduces the visibility of the CronnableSchedule and
refactors a comparator to look like java 8.
This is a followup to #31886. After that commit the
TransportConnectionListener had to be propogated to both the
Transport and the ConnectionManager. This commit moves that listener
to completely live in the ConnectionManager. The request and response
related methods are moved to a TransportMessageListener. That listener
continues to live in the Transport class.
* Lazy resolve DNS (i.e. `String` to `DiscoveryNode`) to not run into indefinitely caching lookup issues (provided the JVM dns cache is configured correctly as explained in https://www.elastic.co/guide/en/elasticsearch/reference/6.3/networkaddress-cache-ttl.html)
* Changed `InetAddress` type to `String` for that higher up the stack
* Passed down `Supplier<DiscoveryNode>` instead of outright `DiscoveryNode` from `RemoteClusterAware#buildRemoteClustersSeeds` on to lazy resolve DNS when the `DiscoveryNode` is actually used (could've also passed down the value of `clusterName = REMOTE_CLUSTERS_SEEDS.getNamespace(concreteSetting)` together with the `List<String>` of hosts, but this route seemed to introduce less duplication and resulted in a significantly smaller changeset).
* Closes#28858
- Missing links to new IndexCaps API
- Incorrect security permissions on IndexCaps API
- GetJobs API must supply a job (or `_all`), omitting throws error
- Link to search/agg limitations from RollupSearch API
- Tweak URLs in quick reference
- Formatting of overview page
As the multibucket feature was merged in, this test hit a side effect
which means buckets trailing an anomaly could become anomalous.
This commit fixes the problem by filtering low score records when
we request them.
Elasticsearch versions earlier than 6.4.0 cannot properly run in a
FIPS 140 JVM. This commit ensures that we use a non-FIPS JVM for
nodes that we spin up in BWC tests even when we're testing FIPS.
* ML: fix updating opened jobs scheduled events (#31651)
* Adding UpdateParamsTests license header
* Adding integration test and addressing PR comments
* addressing test and job names
This commit removes the put privilege API in favor of having a single API to
create and update privileges. If we see the need to have an API like this in
the future we can always add it back.
The Kibana settings docs that these watches rely on can sometimes
contain no xpack settings. When this is the case, we will end up with a
null pointer exception in the script. We need to guard against in these
scripts so this commit does that.
This change cleans up some methods in the CharArrays class from x-pack, which
includes the unification of char[] to utf8 and utf8 to char[] conversions that
intentionally do not use strings. There was previously an implementation in
x-pack and in the reloading of secure settings. The method from the reloading
of secure settings was adopted as it handled more scenarios related to the
backing byte and char buffers that were used to perform the conversions. The
cleaned up class is moved into libs/core to allow it to be used by requests
that will be migrated to the high level rest client.
Relates #32332
This change adds a library to ML that can be used to deduce a log
file's structure given only a sample of the log file.
Eventually this will be used to add an endpoint to ML to make the
functionality available to end users, but this will follow in a
separate change.
The functionality is split into a library so that it can also be
used by a command line tool without requiring the command line
tool to include all server code.
This removes custom Response classes that extend `AcknowledgedResponse` and do nothing, these classes are not needed and we can directly use the non-abstract super-class instead.
While this appears to be a large PR, no code has actually changed, only class names have been changed and entire classes removed.
[ML] Removing old per-partition normalization code
Per-partition normalization is an old, undocumented feature that was
never used by clients. It has been superseded by per-partition maximum
scoring.
To maintain communication compatibility with nodes prior to 6.5 it is
necessary to maintain/cope with the old wire format
This change removes the PasswordHashingBootstrapCheck and replaces it
with validation on the setting itself. This ensures we always get a
valid value from the setting when it is used.
This change moves the validation for values of usernames and passwords
from the request to the transport action. This is done to prevent
the need to move more classes into protocol once we add this API to the
high level rest client. Additionally, this resolves an issue where
validation depends on settings and we always pass empty settings
instead of the actual settings.
Relates #32332
The HipChatMessage#render is no longer used, and instead the
HipChatAccount#render is used in the ExecutableHipChatAction. Only a
test that validated the HttpProxy used this render method still. This
commit cleans it up.
The auth.basic package was an example of a single implementation
interface that leaked into many different classes. In order to clean
this up, the HttpAuth interface, factories, and Registries all were
removed and the single implementation, BasicAuth, was substituted in all
cases. This removes some dependenies between Auth and the Templates,
which can now use static methods on BasicAuth. BasicAuth was also moved
into the http package and all of the other classes were removed.
The PagerDuty v1 API is EOL and will stop accepting new accounts
shortly. This commit swaps out the watcher use of the v1 API with the
new v2 API. It does not change anything about the existing watcher
API.
Closes#32243
All Unit tests in this module are muted in FIPS 140 JVMs and
as such the CI run fails. This commit disables test task for the
module in a FIPS JVM and reverts adding a dummy test in
4cbcc1.
We only upgrade the ID when the state is saved in one of four scenarios:
- when we reach a checkpoint (every 50 pages)
- when we run out of data
- when explicitly stopped
- on failure
The test was relying on the pre-upgrade to finish, save state and then
the post-upgrade to start, hit the end of data and upgrade ID. THEN
get the new doc and apply the new ID.
But I think this is vulnerable to timing issues. If the pre-upgrade
portion shutdown before it saved the state, when restarting we would run
through all the data from the beginning with the old ID, meaning both
docs would still have the old scheme.
This change makes the pre-upgrade wait for the job to go back to STARTED
so that we know it persisted the end point. Post-upgrade, it stops and
restarts the job to ensure the state was persisted and the ID upgraded.
That _should_ rule out the above timing issue.
Closes#32773
Added infrastructure to push through the 'person name field value' to
the normalizer process. This is required by the normalizer to retrieve
the maximum scores for individual partitions.
The request and response classes have been extracted from `IndexUpgradeInfoAction` into top-level classes, and moved to the protocol jar. The `UpgradeActionRequired` enum is also moved.
Relates to #29827
This commit adds missing debug log statements for exceptions
that occur during ticket validation. I thought these
get logged somewhere else in authentication chain
but even after enabling trace logs I could not see them
logged. As the Kerberos exception messages are cryptic
adding full stack trace would help debugging faster.
* Clear Job#finished_time when it is opened (#32605)
* not returning failure when Job#finished_time is not reset
* Changing error log string and source string
Our rest testing framework has support for sniffing the host metadata on
startup and, before this change, it'd sniff that metadata before running
the first test. This prevents running these tests against
elasticsearch installations that won't support sniffing like Elastic
Cloud. This change allows tests to only sniff for metadata when they
encounter a test with a `node_selector`. These selectors are the things
that need the metadata anyway and they are super rare. Tests that use
these won't be able to run against installations that don't support
sniffing but we can just skip them. In the case of Elastic Cloud, these
tests were never going to work against Elastic Cloud anyway.
The upcoming ML log structure finder functionality will use these
libraries, and it makes sense to use the same versions that are
being used elsewhere in Elasticsearch. This is especially true
with icu4j, which is pretty big.
This commit modifies the test to handle file permission
tests in windows/dos environments. The test requires access
to UserPrincipal and so have modified the plugin-security policy
to access user information.
Closes#32637
The incorrect NodeInfo is created when the optional parameter is not used, leading to the incorrect constructor being used. Simplified LocateFunctionProcessorDefinition by using one constructor instead of two.
Fixes https://github.com/elastic/elasticsearch/issues/32554
Skip the comparative tests using lowercasing/uppercasing against H2 (which considers the Locale).
ES-SQL is, so far, ignoring the Locale.
Still, the same queries are executed against ES-SQL alone and results asserted to be correct.
We previously discussed moving the classes extending `AcknowledgedResponse` to
simply use `AcknowledgedResponse`, making the class non-abstract.
This moves the first class to do this, removing `WritePipelineResponse` in the
process.
If we like the way this looks, I will switch the remaining classes over to using
`AcknowledgedResponse`.
Rest HL client: Add get license action
Continues to use String instead of a more complex License class to
hold the license text similarly to put license.
Relates #29827
The Apache Http components support for Spnego scheme
uses canonical name by default.
Also when resolving host name, on centos by default
there are other aliases so adding them to the
DelegationPermission.
Closes#32498
* Change SecurityNioHttpServerTransportTests to use PEM key and
certificate files instead of a JKS keystore so that this tests
can also run in a FIPS 140 JVM
* Do not attempt to run cases with ssl.verification_mode NONE in
SessionFactoryTests so that the tests can run in a FIPS 140 JVM
This commit adds the ML results classes to the X-Pack protocol
library used by the high level REST client.
(Other commits will add the config classes and stats classes.)
These classes:
- Are publically immutable
- Are privately mutable - this is perhaps not as nice as the
config classes, but to do otherwise would require adding
builders and the corresponding server-side classes that the
old transport client used don't have builders
- Have little/no validation of field values beyond null checks
- Are convertible to and from X-Content, but NOT wire transportable
- Have lenient parsers to maximize compatibility across versions
- Have the same class names and getter names as the corresponding
classes in X-Pack core to ease migration for transport client
users
- Don't reproduce all the methods that do calculations or
transformations that the the corresponding classes in X-Pack core
have
Bumping down the version to 6.4 since the backport is complete. Also
adds some missing version checks to the bwc tests to make sure it
only runs on the correct versions
Previously, we were using a simple CRC32 for the IDs of rollup documents.
This is a very poor choice however, since 32bit IDs leads to collisions
between documents very quickly.
This commit moves Rollups over to a 128bit ID. The ID is a concatenation
of all the keys in the document (similar to the rolling CRC before),
hashed with 128bit Murmur3, then base64 encoded. Finally, the job
ID and a delimiter (`$`) are prepended to the ID.
This gurantees that there are 128bits per-job. 128bits should
essentially remove all chances of collisions, and the prepended
job ID means that _if_ there is a collision, it stays "within"
the job.
BWC notes:
We can only upgrade the ID scheme after we know there has been a good
checkpoint during indexing. We don't rely on a STARTED/STOPPED
status since we can't guarantee that resulted from a real checkpoint,
or other state. So we only upgrade the ID after we have reached
a checkpoint state during an active index run, and only after the
checkpoint has been confirmed.
Once a job has been upgraded and checkpointed, the version increments
and the new ID is used in the future. All new jobs use the
new ID from the start
This commit adds four ML config classes to the X-Pack protocol
library used by the high level REST client.
(Other commits will add the remaining config classes, plus results
and stats classes.)
These classes:
- Are immutable
- Have little/no validation of field values beyond null checks
- Are convertible to and from X-Content, but NOT wire transportable
- Have lenient parsers to maximize compatibility across versions
- Have the same class names, member names and getter/setter names
as the corresponding classes in X-Pack core to ease migration
for transport client users
- Don't reproduce all the methods that do calculations or
transformations that the the corresponding classes in X-Pack core
have
This commit splits SecurityNetty4TransportTests in two methods
one handling verification mode certificate and full and one
handling verification mode none. This is done so that the second
method can be muted in a FIPS 140 JVM where verification mode none
cannot be used.
Same motivation as #32507 but for the DateHistogramGroupConfig
configuration object. This pull request also changes the format of the
time zone from a Joda's DateTimeZone to a simple String.
It should help to port the API to the high level rest client and allows
clients to not be forced to use the Joda Time library. Serialization is
impacted but does not need a backward compatibility layer as
DateTimeZone are serialized as String anyway. XContent also expects
a String for timezone, so I found it easier to move everything to String.
Related to #29827
This commit adds the Detector class and its dependencies to the
X-Pack protocol library used by the high level REST client.
(Future commits will add the remaining config classes, plus results
and stats classes.)
These classes:
- Are immutable, with builders, but the builders do no validation
beyond null checks
- Are convertible to and from X-Content, but NOT wire transportable
- Have lenient parsers to maximize compatibility across versions
- Have the same class names, member names and getter/setter names
as the corresponding classes in X-Pack core to ease migration
for transport client users
- Don't reproduce all the methods that do calculations or
transformations that the the corresponding classes in X-Pack core
have
These tests ensure, that the basic watch APIs are tested in the rolling
upgrade tests. After initially adding a watch, the tests try to get,
execute, deactivate and activate a watch. Watcher stats are tested as
well, and an own java based test has been added for restarting, as that
requires waiting for a state change. Watcher history is also checked.
Closes#31216
* Make cluster stats response contain cluster UUID
* Updating constructor usage in Monitoring tests
* Adding cluster_uuid field to Cluster Stats API reference doc
* Adding rest api spec test for expecting cluster_uuid in cluster stats response
* Adding missing newline
* Indenting do section properly
* Missed a spot!
* Fixing the test cluster ID
The User class has been moved to the protocol project for upcoming work
to add more security APIs to the high level rest client. As part of
this change, the toString method no longer uses a custom output method
from MetadataUtils and instead just relies on Java's toString
implementation.
Yogesh Gaikwad
Jason Tedor
Lisa Cawley
Benjamin Trent
Nik Everett
Ioannis Kakavas
Alexander Reelsen
Alpar Torok
Tim Brooks
Armin Braun
Zachary Tong
Dimitris Athanasiou
Jay Modi
Ed Savage
Ed Savage
Adrien Grand
David Kyle
Jim Ferenczi
debadair
David Roberts
Lee Hinman
Michael Basnight
Yannick Welsch
Nhat Nguyen
Zachary Tong
Luca Cavanna
Albert Zaharovits
Tim Vernum
Andrei Stefan
Nicholas Knize
Jim Ferenczi
Tim Vernum
Tanguy Leroux
Albert Zaharovits
Igor Motov
Shaunak Kashyap