Today we have duplicated code that is quite complicated to iterate
over rewriteable (`QueryBuilders` mainly) This change introduces a
`Rewriteable` interface that allow to share code to do the rewriting as
well as encapsulation and composition of queries.
Setting a timeout or enforcing low-level search cancellation used to make us
wrap the collector and check either the current time or whether the search
task was cancelled for every collected document. This can be significant
overhead on cheap queries that match many documents.
This commit changes the approach to wrap the bulk scorer rather than the
collector and exponentially increase the interval between two consecutive
checks in order to reduce the overhead of those checks.
When a node tries to join a cluster, it goes through a validation step to make sure the node is compatible with the cluster. Currently we validation that the node can read the cluster state and that it is compatible with the indexes of the cluster. This PR adds validation that the joining node's version is compatible with the versions of existing nodes. Concretely we check that:
1) The node's min compatible version is higher or equal to any node in the cluster (this prevents a too-new node from joining)
2) The node's version is higher or equal to the min compat version of all cluster nodes (this prevents a too old join where, for example, the master is on 5.6, there's another 6.0 node in the cluster and a 5.4 node tries to join).
3) The node's major version is at least as higher as the lowest node in the cluster. This is important as we use the minimum version in the cluster to stop executing bwc code for operations that require multiple nodes. If the nodes are already operating in "new cluster mode", we should prevent nodes from the previous major to join (even if they are wire level compatible). This does mean that if you have a very unlucky partition during the upgrade which partitions all old nodes which are also a minority / data nodes only, the may not be able to re-join the cluster. We feel this edge case risk is well worth the simplification it brings to BWC layers only going one way.
Also, the node join validation can now selectively fail specific nodes (previously the entire batch was failed). This is an important preparation for a follow up PR where we plan to have a rejected joining node die with dignity.
* Register data node stats from info carried back in search responses
This is part of #24915, where we now calculate the EWMA of service time for
tasks in the search threadpool, and send that as well as the current queue size
back to the coordinating node. The coordinating node now tracks this information
for each node in the cluster.
This information will be used in the future the determining the best replica a
search request should be routed to. This change has no user-visible difference.
* Move response time timing into ResponseListenerWrapper
* Move ResponseListenerWrapper to ActionListener instead of SearchActionListener
Also removes the logger
* Move `requestIndex` back to private
* De-guice-ify ResponseCollectorService \o/
* Undo all changes to SearchQueryThenFetchAsyncAction
* Remove unneeded response collector from TransportSearchAction
* Undo all changes to SearchDfsQueryThenFetchAsyncAction
* Completely rewrite the inside of ResponseCollectorService's record keeping
* Documentation and cleanups for ResponseCollectorService
* Add unit test for collection of queue size and service time
* Fix Guice construction error
* Add basic unit tests for ResponseCollectorService
* Fix version constant for the master merge
* Fix test compilation after master merge
* Add a test for node removal on cluster changed event
* Remove integration test as there are now unit tests
* Rename ResponseListenerWrapper -> SearchExecutionStatsCollector
* Fix line-length
* Make classes private and final where appropriate
* Pass nodeId into SearchExecutionStatsCollector and use only ActionListener
* Get nodeId from connection so searchShardTarget can be private
* Remove threadpool from SearchContext, get it from IndexShard instead
* Add missing import
* Use BiFunction for responseWrapper rather than passing in collector service
The following token filters were moved: arabic_normalization, german_normalization, hindi_normalization, indic_normalization, persian_normalization, scandinavian_normalization, serbian_normalization, sorani_normalization, cjk_width and cjk_width
Relates to #23658
#25521 changed channel closing to be handled async on anything but transport stop. This means it may take a while before
calling `connection.close()` and the node being removed from the `connectedNodes` list (but the connection is immediately unusuable).
Fixes#25686
Currently replication and recovery are both coordinated through the latest cluster state available on the ClusterService as well as through the GlobalCheckpointTracker (to have consistent local/global checkpoint information), making it difficult to understand the relation between recovery and replication, and requiring some tricky checks in the recovery code to coordinate between the two. This commit makes the primary the single owner of its replication group, which simplifies the replication model and allows to clean up corner cases we have in our recovery code. It also reduces the dependencies in the code, so that neither RecoverySourceXXX nor ReplicationOperation need access to the latest state on ClusterService anymore. Finally, it gives us the property that in-sync shard copies won't receive global checkpoint updates which are above their local checkpoint (relates #25485).
It was brought up that our current client artifacts have generic names like 'rest' that may cause conflicts with other artifacts.
This commit renames:
- rest -> elasticsearch-rest-client
- sniffer -> elasticsearch-rest-client-sniffer
- rest-high-level -> elasticsearch-rest-high-level-client
A couple of small changes are also preparing the high level client for its first release.
Closes#20248
We already use a per JVM port range in MockTransportService. Yet,
it's possible that if we are executing in the JVM with ordinal 0 that
other clusters reuse ports from the mock transport service and some tests
try to simulate disconnects etc. By using a non-defautl port range (starting at 10300)
we prevent internal test clusters from reusing any of the mock impls ports
Relates to #25301
Today if we search across a large amount of shards we hit every shard. Yet, it's quite
common to search across an index pattern for time based indices but filtering will exclude
all results outside a certain time range ie. `now-3d`. While the search can potentially hit
hundreds of shards the majority of the shards might yield 0 results since there is not document
that is within this date range. Kibana for instance does this regularly but used `_field_stats`
to optimize the indexes they need to query. Now with the deprecation of `_field_stats` and it's upcoming removal a single dashboard in kibana can potentially turn into searches hitting hundreds or thousands of shards and that can easily cause search rejections even though the most of the requests are very likely super cheap and only need a query rewriting to early terminate with 0 results.
This change adds a pre-filter phase for searches that can, if the number of shards are higher than a the `pre_filter_shard_size` threshold (defaults to 128 shards), fan out to the shards
and check if the query can potentially match any documents at all. While false positives are possible, a negative response means that no matches are possible. These requests are not subject to rejection and can greatly reduce the number of shards a request needs to hit. The approach here is preferable to the kibana approach with field stats since it correctly handles aliases and uses the correct threadpools to execute these requests. Further it's completely transparent to the user and improves scalability of elasticsearch in general on large clusters.
There is a bug when a call to `BytesReferenceStreamInput` skip is made
on a `BytesReference` that has an initial offset. The offset for the
current slice is added to the current index and then subtracted from the
length. This introduces the possibility of a negative number of bytes to
skip. This happens inside a loop, which leads to an infinte loop.
This commit correctly subtracts the current slice index from the
slice.length. Additionally, the `BytesArrayTests` are modified to test
instances that include an offset.
This is a protection mechanism to prevent a single search request from
hitting a large number of shards in the cluster concurrently. If a search is
executed against all indices in the cluster this can easily overload the cluster
causing rejections etc. which is not necessarily desirable. Instead this PR adds
a per request limit of `max_concurrent_shard_requests` that throttles the number of
concurrent initial phase requests to `256` by default. This limit can be increased per request
and protects single search requests from overloading the cluster. Subsequent PRs can introduces
addiontional improvemetns ie. limiting this on a `_msearch` level, making defaults a factor of
the number of nodes or sort shards iters such that we gain the best concurrency across nodes.
We lost the cluster alias due to some special caseing in inner hits
and due to the fact that we didn't pass on the alias to the shard request.
This change ensures that we have the cluster alias present on the shard to
ensure all SearchShardTarget reads preserve the alias.
Relates to #25606
Currently when we close a channel in Netty4Utils.closeChannels we
block until the closing is complete. This introduces the possibility
that a network selector thread will block while waiting until a
separate network selector thread closes a channel.
For instance: T1 closes channel 1 (which is assigned to a T1 selector).
Channel 1's close listener executes the closing of the node. That
means that T1 now tries to close channel 2. However, channel 2 is
assigned to a selector that is running on T2. T1 now must wait until T2
closes that channel at some point in the future.
This commit addresses this by adding a boolean to closeChannels
indicating if we should block on close. We only set this boolean to true
if we are closing down the server channels at shutdown. This call is
never made from a network thread. When we call the closeChannels method
with that boolean set to false, we do not block on close.
This change collapses some of the packages for the bucket aggregations into their parent packages. This was done for the following aggregations:
* The variants of the range aggregation (geo_distance, date and ip) were moved into the `o.e.s.a.bucket.range` package
* The `o.e.s.a.bucket.terms.support` package was removed and the classes were moved to `o.e.s.a.bucket.terms`
* The filter aggregation was moved to `o.e.s.a.bucket.filter`
Since this PR is already relatively large with only the above changes subsequent PRs will do similar operations on relevant metric and pipeline aggregations
Relates to #22868
We currently check whether translog files can be trimmed whenever we create a new translog generation or close a view. However #25294 added a long translog retention period (12h, max 512MB by default), which means translog files should potentially be cleaned up long after there isn't any indexing activity to trigger flushes/the creation of new translog files. We therefore need a scheduled background check to clean up those files once they are no longer needed.
Relates to #10708
This commit does two things:
- bumps the version from 6.0.0-alpha3 to 6.0.0-beta1
- renames the 6.0.0-alpha3 version constant to 6.0.0-beta1
Relates #25621
This commit adds cross-settings validation for the low/high/flood stage
disk watermark settings. This validation was enabled by the introduction
of multiple settings validation.
Relates #25600
This commit refactors the global checkpont tracker to make it more
resilient. The main idea is to make it more explicit what state is
actually captured and how that state is updated through
replication/cluster state updates etc. It also fixes the issue where the
local checkpoint information is not being updated when a shard becomes
primary. The primary relocation handoff becomes very simple too, we can
just verbatim copy over the internal state.
Relates #25468
* Improved REST endpoint exception handling, see #15335
Also improved OPTIONS http method handling to better conform with the
http spec.
* Tidied up formatting and comments
See #15335
* Tests for #15335
* Cleaned up comments, added section number
* Swapped out tab indents for space indents
* Test class now extends ESSingleNodeTestCase
* Capture RestResponse so it can be examined in test cases
Simple addition to surface the RestResponse object so we can run tests
against it (see issue #15335).
* Refactored class name, included feedback
See #15335.
* Unit test for REST error handling enhancements
Randomizing unit test for enhanced REST response error handling. See
issue #15335 for more details.
* Cleaned up formatting
* New constructor to set HTTP method
Constructor added to support RestController test cases.
* Refactored FakeRestRequest, streamlined test case.
* Cleaned up conflicts
* Tests for #15335
* Added functionality to ignore or include path wildcards
See #15335
* Further enhancements to request handling
Refactored executeHandler to prioritize explicit path matches. See
#15335 for more information.
* Cosmetic fixes
* Refactored method handlers
* Removed redundant import
* Updated integration tests
* Refactoring to address issue #17853
* Cleaned up test assertions
* Fixed edge case if OPTIONS method randomly selected as invalid method
In this test, an OPTIONS method request is valid, and should not return
a 405 error.
* Remove redundant static modifier
* Hook the multiple PathTrie attempts into RestHandler.dispatchRequest
* Add missing space
* Correctly retrieve new handler for each Trie strategy
* Only copy headers to threadcontext once
* Fix test after REST header copying moved higher up
* Restore original params when trying the next trie candidate
* Remove OPTIONS for invalidHttpMethodArray so a 405 is guaranteed in tests
* Re-add the fix I already added and got removed during merge :-/
* Add missing GET method to test
* Add documentation to migration guide about breaking 404 -> 405 changes
* Explain boolean response, pull into local var
* fixup! Explain boolean response, pull into local var
* Encapsulate multiple HTTP methods into PathTrie<MethodHandlers>
* Add PathTrie.retrieveAll where all matching modes can be retrieved
Then TrieMatchingMode can be package private and not leak into RestController
* Include body of error with 405 responses to give hint about valid methods
* Fix missing usageService handler addition
I accidentally removed this :X
* Initialize PathTrieIterator modes with Arrays.asList
* Use "== false" instead of !
* Missing paren :-/
Indexing ids in binary form should help with indexing speed since we would
have to compare fewer bytes upon sorting, should help with memory usage of
the live version map since keys will be shorter, and might help with disk
usage depending on how efficient the terms dictionary is at compressing
terms.
Since we can only expect base64 ids in the auto-generated case, this PR tries
to use an encoding that makes the binary id equal to the base64-decoded id in
the majority of cases (253 out of 256). It also specializes numeric ids, since
this seems to be common when content that is stored in Elasticsearch comes
from another database that uses eg. auto-increment ids.
Another option could be to require base64 ids all the time. It would make things
simpler but I'm not sure users would welcome this requirement.
This PR should bring some benefits, but I expect it to be mostly useful when
coupled with something like #24615.
Closes#18154
Transport profiles unfortunately have never been validated. Yet, it's very
easy to make a mistake when configuring profiles which will most likely stay
undetected since we don't validate the settings but allow almost everything
based on the wildcard in `transport.profiles.*`. This change removes the
settings subset based parsing of profiles but rather uses concrete affix settings
for the profiles which makes it easier to fall back to higher level settings since
the fallback settings are present when the profile setting is parsed. Previously, it was
unclear in the code which setting is used ie. if the profiles settings (with removed
prefixes) or the global node setting. There is no distinction anymore since we don't pull
prefix based settings.
Some tests use MockTransportService to do network based testing.
Yet, we run tests in multiple JVMs that means
concurrent tests could claim port that another JVM just released
and if that test tries to simulate a disconnect it might be smart
enough to re-connect depending on what is tested. To reduce the risk,
since this is very hard to debug we use a different default
port range per JVM unless the incoming settings overriding it.
Closes#25301
Today when we run out of disk all kinds of crazy things can happen
and nodes are becoming hard to maintain once out of disk is hit.
While we try to move shards away if we hit watermarks this might not
be possible in many situations. Based on the discussion in #24299
this change monitors disk utilization and adds a flood-stage watermark
that causes all indices that are allocated on a node hitting the flood-stage
mark to be switched read-only (with the option to be deleted). This allows users to react on the low disk
situation while subsequent write requests will be rejected. Users can switch
individual indices read-write once the situation is sorted out. There is no
automatic read-write switch once the node has enough space. This requires
user interaction.
The flood-stage watermark is set to `95%` utilization by default.
Closes#24299
All query builders written as self contained xContent objects, to we should mark
them accordingly using ToXContentObject. This also makes it possible to use
things like XContentHelper#toXContent to render query builders in tests.
QueryParseContext is currently only used as a wrapper for an XContentParser, so
this change removes it entirely and changes the appropriate APIs that use it so
far to only accept a parser instead.
This commit makes the use of the global network settings explicit instead
of implicit within NetworkService. It cleans up several places where we fall
back to the global settings while we should have used tcp or http ones.
In addition this change also removes unnecessary settings classes
We have various assertions that check we never block on transport
threads. This commit adds the thread names for the NioTransport to
these assertions.
With this change I had to fix two places where we were calling blocking
methods from the transport threads.
This commit adds additional protection to `ESSelector` and its
implementations to ensure that channels are not enqueued after the
selector is closed.
After a channel has been added to the queue, we check that the selector
is open. If it is not, then we remove the channel from the queue. If the
channel is removed successfully, we throw an `IllegalStateException`.
Our current TCPTransport logic assumes that we do not pass pings to
the TCPTransport level.
This commit fixes an issue where NioTransport was passing pings to
TCPTransport and leading to exceptions.
Currently QueryParseContext is only a thin wrapper around an XContentParser that
adds little functionality of its own. I provides helpers for long deprecated
field names which can be removed and two helper methods that can be made static
and moved to other classes. This is a first step in helping to remove
QueryParseContext entirely.
In SimpleNioTransportTests we assert that an IOException has a certain
message. This message appears that it is not dependible (and might
change based on platform).
Our other transport tests (mock and netty) do not make this assertion.
Instead they only assert on our application exception message. This
commit removes the IOException message assertion. And retains the
ConnectTransportException message assertion.
This commit introduces a nio based tcp transport into framework for
testing.
Currently Elasticsearch uses a simple blocking tcp transport for
testing purposes (MockTcpTransport). This diverges from production
where our current transport (netty) is non-blocking.
The point of this commit is to introduce a testing variant that more
closely matches the behavior of production instances.
This commit removes path.conf as a valid setting and replaces it with a
command-line flag for specifying a non-default path for configuration.
Relates #25392
The following token filters were moved: stemmer, stemmer_override, kstem, dictionary_decompounder, hyphenation_decompounder, reverse, elision and truncate.
Relates to #23658
While real secure settings (ie an ES keystore) cannot be merged
together, mocked secure settings can and need to be sometimes merged.
This commit adds a merge method to allow tests to merge together
multiple instances of secure settings.
OldIndexBackwardsCompatibilityIT#testOldClusterStates tested whether global and index metadata could be read from data directory,
this can also be tested in full cluster qa test that checks cluster state via api.
Relates to #24939
#25147 added the translog deletion policy but didn't enable it by default. This PR enables a default retention of 512MB (same maximum size of the current translog) and an age of 12 hours (i.e., after 12 hours all translog files will be deleted). This increases to chance to have an ops based recovery, even if the primary flushed or the replica was offline for a few hours.
In order to see which parts of the translog are committed into lucene the translog stats are extended to include information about uncommitted operations.
Views now include all translog ops and guarantee, as before, that those will not go away. Snapshotting a view allows to filter out generations that are not relevant based on a specific sequence number.
Relates to #10708
Most notable changes:
- better update concurrency: LUCENE-7868
- TopDocs.totalHits is now a long: LUCENE-7872
- QueryBuilder does not remove the boolean query around multi-term synonyms:
LUCENE-7878
- removal of Fields: LUCENE-7500
For the `TopDocs.totalHits` change, this PR relies on the fact that the encoding
of vInts and vLongs are compatible: you can write and read with any of them as
long as the value can be represented by a positive int.
MockTransportServices allows us to simulate network disruptions in our testing infra. Sadly it wasn't updated to the state of the art in Transport land. This PR brings it up to speed. Specifically:
1) Opening a connection is now also blocked (before only node connections were blocked)
2) Simplifies things using the latest connection based notification between TcpTransport and TransportService for when a disconnect happens.
3) By 2, it fixes a race condition where we may fail to respond to a sent request when it is sent concurrently with the closing of a connection. The old code relied on a node based bridge between tcp transport and transport service. Sadly, the following doesn't work any more:
```
if (transport.nodeConnected(node)) {
// this a connected node, disconnecting from it will be up the exception
transport.disconnectFromNode(node); <-- this may now be a noop and it doesn't mean that the transport service was notified of the disconnect between the nodeConnected check and here.
} else {
throw new ConnectTransportException(node, reason, e);
}
```
If secure settings are closed after the node has been constructed
no key-store access is permitted. We should also try to be as close as possible
to the real behavior if we mock secure settings. This change also adds
the same behavior as bootstrap has to InternalTestCluster to ensure we fail
if we try to read from secure settings after the node has been constructed.
In MockFSDirectory we should use the actual indexes settings to build
a new IndexMetaData settings object instead of the node settings.
Relates to #25297
I'm still trying to hunt down rare failures in the cancelation tests
for reindex and friends. Here is the latest:
https://elasticsearch-ci.elastic.co/job/elastic+elasticsearch+5.x+multijob-unix-compatibility/os=ubuntu/876/console
It doesn't show much, other than that one of the tasks didn't kill
itself when asked to cancel.
So I'm going a bit crazy with debug logging so that the next time this
comes up I can trace exactly what happened.
Additionally, this tweaks the logic around how rethrottles were
performed around cancel. Previously we set the `requestsPerSecond`
to `0` when we cancelled the task. That was the "old way" to set them
to inifity which was the intent. This switches that from `0` to
`Float.MAX_VALUE` which is the "new way" to set the `requestsPerSecond`
to infinity. I don't know that this is much better, but it feels better.
In tests, we sometimes create a random directory service and as part of that the IndexSettings get
built again. When we build them again, we need to make sure we do not set the secure settings on
the new IndexMetaData object that gets created as the node settings already have the secure
settings and the index settings and node settings will be combined. If both have secure settings,
the settings builder will throw an AlreadySetException.
Indexing or deleting documents through the IndexShard interface is quite complex and error-prone. It requires multiple calls, e.g. first prepareIndexOnPrimary, then do some checks if mapping updates have occurred, then do the actual indexing using index(...) etc. Currently each consumer of the interface (local recovery, peer recovery, replication) has additional custom checks built around it to deal with mapping updates, some of which are even inconsistent. This commit aims at reducing the complexity by exposing a simpler interface on IndexShard. There are no more prepare*** methods and the mapping complexity is also hidden, but still giving callers a possibility to implement custom logic to deal with mapping updates.
Today we maintain a map of open connections in order to close them when
a low level channel gets closed or handles a failure. We also spawn a thread due to some
tricky concurrency issues especially with respect to netty since they listener might
be called on a transport / boss thread. Executions on those threads must not be blocking
since otherwise we will likely deadlock the event processing which adds to the
complexity of the concurrency model in this class.
This change associates the connection with the close callback that every channel invokes
once it's closed which allows us to remove the connections map. A relaxed non-blocking
concurrency model in the connection close listener allows cleaning up connected nodes without
blocking on any lock.
This change adds tests for the aggregation parsing that try to simulate that we
can parse existing aggregations in a forward compatible way in the future,
ignoring potential newly added fields or substructures to the xContent response.
Today TcpTransport is the de-facto base-class for transport implementations.
The need for all the callbacks we have in TransportServiceAdaptor are not necessary
anymore since we can simply have the logic inside the base class itself. This change
moves the stats metrics directly into TcpTransport removing the need for low level
bytes send / received callbacks.
We use assertBusy in many places where the underlying code throw exceptions. Currently we need to wrap those exceptions in a RuntimeException which is ugly.
This snapshot has faster range queries on range fields (LUCENE-7828), more
accurate norms (LUCENE-7730) and the ability to use fake term frequencies
(LUCENE-7854).
This commit renames the needsScores method so as to make it
automatically generatable, based on the name of the `_score` variable
which is available in search scripts. It also adds documentation to
ScriptContext to explain the naming and signature of such methods.
In #25201, a setting was added to allow setting the retry timeout for the rest client under the
impression that this would allow requests to go longer than 30s. However, there is also a socket
timeout that needs to be set to greater than 30s, which this change adds a setting for.
Expose the experimental simplepattern and
simplepatternsplit tokenizers in the common
analysis plugin. They provide tokenization based
on regular expressions, using Lucene's
deterministic regex implementation that is usually
faster than Java's and has protections against
creating too-deep stacks during matching.
Both have a not-very-useful default pattern of the
empty string because all tokenizer factories must
be able to be instantiated at index creation time.
They should always be configured by the user
in practice.
This commit adds a setting to change the request timeout for the rest client. This is useful as the
default timeout is 30s, which is also the same default for calls like cluster health. If both are
the same then the response from the cluster health api will not be received as the client usually
times out first making test failures harder to debug.
Relates #25185
Today if a channel gets closed due to a disconnect we notify the response
handler that the connection is closed and the node is disconnected. Unfortunately
this is not a complete solution since it only works for published connections.
Connections that are unpublished ie. for discovery can indefinitely hang since we
never invoke their handers when we get a failure while a user is waiting for
the response. This change adds connection tracking to TcpTransport that ensures
we are notifying the corresponding connection if there is a failure on a channel.
When we disabled `_all` by default for indices created in 6.0, we missed adding
a layer that would handle the situation where `_all` was not enabled in 5.x and
then the cluster was updated to 6.0, this means that when the cluster was
updated the `_all` field would be disabled for 5.x indices and field values
would not be added to the `_all` field.
This adds a compatibility layer for 5.x indices where we treat the default
enabled value for the `_all` field to be `true` if unset on 5.x indices.
Resolves#25068
Test: randomVersionBetween works with unreleased
Modifies randomVersionBetween so that it works with unreleased
versions. This should make switching a version from unreleased
to released much simpler.
This commit refactors the query phase in order to be able
to automatically detect queries that can be early terminated.
If the index sort matches the query sort, the top docs collection is early terminated
on each segment and the computing of the total number of hits that match the query is delegated to a simple TotalHitCountCollector.
This change also adds a new parameter to the search request called `track_total_hits`.
It indicates if the total number of hits that match the query should be tracked.
If false, queries sorted by the index sort will not try to compute this information and
and will limit the collection to the first N documents per segment.
Aggregations are not impacted and will continue to see every document
even when the index sort matches the query sort and `track_total_hits` is false.
Relates #6720
This commit modifies query_string, simple_query_string and multi_match queries to always use a DisjunctionMaxQuery when a disjunction over multiple fields is built. The tiebreaker is set to 1 in order to behave like the boolean query in terms of scoring.
The removal of the coord factor in Lucene 7 made this change mandatory to correctly handle minimum_should_match.
Closes#23966
This commit moves the assumeFalse() calls that implement test skipping
and blacklisting out of the @Before method of ESClientYamlSuiteTestCase.
The problem with having them in the @Before method is that if an
assumption triggers then the @Before methods of classes that extend
ESClientYamlSuiteTestCase will not run, but their @After methods will.
This can lead to inconsistencies that cause assertions in the @After
methods and fail the test even though it was skipped/blacklisted.
Instead the assumeFalse() calls are now at the beginning of the test()
method, which runs after all @Before methods (including those in classes
that extend ESClientYamlSuiteTestCase) have completed. The only side
effect is that overridden test() methods in classes that extend
ESClientYamlSuiteTestCase which call super.test() and also do other things
must now be designed not to consume any InternalAssumptionViolatedException
that may be thrown by the super.test() call.
Relates elastic/x-pack-elasticsearch#1650
For the response parsing we want to be lenient when it comes to parsing
new xContent fields. In order to ensure this in our testing, this change
adds a utility method to XContentTestUtils that takes xContent bytes
representation as input and recursively a random field on each object
level.
Sometimes we also want to exclude a whole subtree from this treatment
(e.g. skipping "_source"), other times an element (e.g. "fields", "highlight"
in SearchHit) can have arbitraryly named objects. Those cases can be
specified as exceptions.
Splits TranslogRecoveryPerformer into three parts:
- the translog operation to engine operation converter
- the operation perfomer (that indexes the operation into the engine)
- the translog statistics (for which there is already RecoveryState.Translog)
This makes it possible for peer recovery to use the same IndexShard interface as bulk shard requests (i.e. Engine operations instead of Translog operations). It also pushes the "fail on bad mapping" logic outside of IndexShard. Future pull requests could unify the BulkShard and peer recovery path even more.
This change moves the parent_id query to the parent-join module and handles the case when only the parent-join field can be declared on an index (index with single type on).
If single type is off it uses the legacy parent join field mapper and switch to the new one otherwise (default in 6).
Relates #20257
Both gradle and java code attempt to infer the type of a each
Version constant in Version.java. It is super important that
they infer that each constant has the same type. If they disagree
we might accidentally not be testing backwards compatibility for
some version.
This adds a test to make sure that they agree, modulo known and
accepted differences (mostly around alphas). It also changes the
minimum wire compatible version from the released 5.4.0 to the
unreleased 5.5.0 as that lines up with the gradle logic.
Relates to #24798
Note that the gradle and java version logic doesn't actually match so
this contains a hack to make it *look* like it matches. Since this is a
start, I'm merging it and going to work on some followups to make the
logic actually match.....
This commit creates TemplateScript and associated classes so that
templates no longer need a special ScriptService.compileTemplate method.
The execute() method is equivalent to the old run() method.
relates #20426
Previously, when allocating bytes for a BigArray, the array was created
(or attempted to be created) and only then would the array be checked
for the amount of RAM used to see if the circuit breaker should trip.
This is problematic because for very large arrays, if creating or
resizing the array, it is possible to attempt to create/resize and get
an OOM error before the circuit breaker trips, because the allocation
happens before checking with the circuit breaker.
This commit ensures that the circuit breaker is checked before all big
array allocations (note, this does not effect the array allocations that
are less than 16kb which use the [Type]ArrayWrapper classes found in
BigArrays.java). If such an allocation or resizing would cause the
circuit breaker to trip, then the breaker trips before attempting to
allocate and potentially running into an OOM error from the JVM.
Closes#24790
After every REST test we wait for the list of pending cluster tasks
to empty before moving on to the next task. If the list doesn't
empty in 10 second we fail the test. This improves the error message
when we fail the test to include the list of running tasks.
For comparing actual and parsed object equality for the response parsing we
currently rely on comparing the original xContent and the output of the parsed
object. Currently we only have cryptic error messages if this comparison fails
which are hard to read also because we recursively compare lists and maps of
the xContent structures we compare.
This commits leverages the existing NotEqualMessageBuilder for providing error
messages that are more detailed and useful for debugging if an error occurs.
ScriptContexts currently understand a FactoryType that can produce
instances of the script InstanceType. However, for search scripts, this
does not work as we have the concept of LeafSearchScript that is created
per lucene segment. This commit effectively renames the existing
SearchScript class into SearchScript.LeafFactory, which is a new,
optional, class that can be defined within a ScriptContext.
LeafSearchScript is effectively renamed back into SearchScript. This
change allows the model of stateless factory -> stateful factory ->
script instance to continue, but in a generic way that any script
context may take advantage of.
relates #20426
Removes the need for the `_UNRELEASED` suffix on versions by detecting if a version should be unreleased or not based on the versions around it. This should make it simpler to automate the task of adding a new version label.
This commit renames the concept of the "compiled type" to a "factory
type", along with all implementations of this class to be named Factory.
This brings it inline with the classes purpose.
This commit adds collection of all contexts to the parameters of
getScriptEngine. This will allow script engines like painless to
precache extra information about the contexts.
This commit changes the compile method of ScriptEngine to be generic in
the same way it is on ScriptService. This moves the shim of handling the
two existing context classes into each script engine, so that each
engine can be worked on independently to convert to real handling of
contexts.
This commit modifies the compile method of ScriptService to be context
aware. The ScriptContext is now a generic class which contains both the
instance type and compiled type for a script. Instance type may be
stateful (for example, pre loading field information for the index a
script will execute on, like in expressions), while the compiled type is
stateless and used to construct instance type instances. This change is
only a first step to cutover ScriptService to the new paradigm. It only
converts callers to the script service, and has a small shim to wrap
compilation from the script engines to support the current two fixed
instance types, SearchScript and ExecutableScript.
Since groovy was removed, we no longer have any ScriptEngines with
resources to release. We may want to keep the option open for a script
engine to close resources, but this would not be common. This commit
adds a default implementation to ScriptEngine for `close()` to reduce
the boiler plate that must be added for a ScriptEngine implementation.
With #24779 in place, we can now guaranteed that a single translog generation file will never have a sequence number conflict that needs to be resolved by looking at primary terms. These conflicts can a occur when a replica contains an operation which isn't part of the history of a newly promoted primary. That primary can then assign a different operation to the same slot and replicate it to the replica.
PS. Knowing that each generation file is conflict free will simplifying repairing these conflicts when we read from the translog.
PPS. This PR also fixes some bugs in the piping of primary terms in the bulk shard action. These bugs are a result of the legacy of IndexRequest/DeleteRequest being a ReplicationRequest. We need to change that as a follow up.
Relates to #10708
This commit cleans up tests which currently use custom script engine
implementations, converting them to use a MockScriptEngine with script
functions provided by the tests. It also creates a common set of metric
scripts which were copied across a couple metric agg tests.
Large test suites with unfortunate seed choices can easily exceed the
1000 script compilations per minute limit. This commit increases the
limit in integration tests to 2048.
Boaz Leskes
Simon Willnauer
Adrien Grand
Lee Hinman
Martijn van Groningen
Yannick Welsch
Luca Cavanna
Tim Brooks
Colin Goodheart-Smithe
Jason Tedor
Nik Everett
Christoph Büscher
Ryan Ernst
Jay Modi
Andy Bristol
Tal Levy
Lee Hinman
Jim Ferenczi
David Roberts
Jack Conradson
Ali Beyad
Jim Ferenczi
Matt Weber