max_empty_searches = -1 in a datafeed update implies
max_empty_searches will be unset on the datafeed when
the update is applied. The isNoop() method needs to
take this -1 to null equivalence into account.
Previously, the safety check for the 2nd argument of the DateAddProcessor was
restricting it to Integer which was wrong since we allow all non-rational
numbers, so it's changed to a Number check as it's done in other cases.
Enhanced some tests regarding the check for an integer (non-rational
argument).
(cherry picked from commit 0516b6eaf5eb98fa5bd087c3fece80139a6b118e)
We were incorrectly handling `IOExceptions` thrown by
the `InputStream` side of the upload operation, resulting
in a `ClassCastException` as we expected to never get
`IOException` from the Azure SDK code but we do in practice.
This PR also sets an assertion on `markSupported` for the
streams used by the SDK as adding the test for this scenario
revealed that the SDK client would retry uploads for
non-mark-supporting streams on `IOException` in the `InputStream`.
This change adds:
- A new option, allow_lazy_open, to anomaly detection jobs
- A new option, allow_lazy_start, to data frame analytics jobs
Both work in the same way: they allow a job to be
opened/started even if no ML node exists that can
accommodate the job immediately. In this situation
the job waits in the opening/starting state until ML
node capacity is available. (The starting state for data
frame analytics jobs is new in this change.)
Additionally, the ML nightly maintenance tasks now
creates audit warnings for ML jobs that are unassigned.
This means that jobs that cannot be assigned to an ML
node for a very long time will show a yellow warning
triangle in the UI.
A final change is that it is now possible to close a job
that is not assigned to a node without using force.
This is because previously jobs that were open but
not assigned to a node were an aberration, whereas
after this change they'll be relatively common.
This commit adds HLRC support and documentation for the SLM Start and
Stop APIs, as well as updating existing documentation where appropriate.
This commit also ensures that the SLM APIs are properly included in the
HLRC documentation.
This PR adds the ability to run the enrich policy execution task in the background,
returning a task id instead of waiting for the completed operation.
Prior to this change the `target_field` would always be a json array
field in the document being ingested. This to take into account that
multiple enrich documents could be inserted into the `target_field`.
However the default `max_matches` is `1`. Meaning that by default
only a single enrich document would be added to `target_field` json
array field.
This commit changes this; if `max_matches` is set to `1` then the single
document would be added as a json object to the `target_field` and
if it is configured to a higher value then the enrich documents will be
added as a json array (even if a single enrich document happens to be
enriched).
Elastic cloud has a concept of a cloud Id. This Id is a base64 encoded
url, split up into a few parts. This commit allows the user to pass in a
cloud id now, which is translated to a HttpHost that is defined by the
encoded parts therein.
Currently, partial snapshots will eventually build up unless they are
manually deleted. Partial snapshots may be useful if there is not a more
recent successful snapshot, but should eventually be deleted if they are
no longer useful.
With this change, partial snapshots are deleted using the following
strategy: PARTIAL snapshots will be kept until the configured
expire_after period has passed, if present, and then be deleted. If
there is no configured expire_after in the retention policy, then they
will be deleted if there is at least one more recent successful snapshot
from this policy (as they may otherwise be useful for troubleshooting
purposes). Partial snapshots are not counted towards either min_count or
max_count.
Adds a new datafeed config option, max_empty_searches,
that tells a datafeed that has never found any data to stop
itself and close its associated job after a certain number
of real-time searches have returned no data.
Backport of #47922
Make clear in the docs that the role mapping APIs is the preferred
way to manage role mappings and that the role mappings that are
defined in files cannot be viewed or managed with the APIs
This prevents the following warning from being printed to console:
`regular expression has redundant nested repeat operator + /%\{(?<name>(?<pattern>[A-z0-9]+)(?::(?<subname>[[:alnum:]@\[\]_:.-]+))?)(?:=(?<definition>(?:(?:[^{}]+|\.+)+)+))?\}/`
The current grok expression is not failing, but just this warning is being printed.
The warning started being printed after upgrading joni (#47374).
Closes#47861
This change modifies the local execution of the `can_match` phase to **not** apply
the plugin's reader wrapper (if it is configured) when acquiring the searcher.
We must ensure that the phase runs quickly and since we don't know the cost
of applying the wrapper it is preferable to avoid it entirely. The can_match
phase can aford false positives so it is also safe for the builtin plugins
that use this functionality.
Closes#46817
With this change, shard allocation prefers allocating replicas on a node
that already has a copy of the shard that is as close as possible to the
primary, so that it is as cheap as possible to bring the new replica in
sync with the primary. Furthermore, if we find a copy that is identical
to the primary then we cancel an ongoing recovery because the new copy
which is identical to the primary needs no work to recover as a replica.
We no longer need to perform a synced flush before performing a rolling
upgrade or full cluster start with this improvement.
Closes#46318
This change should reduce refreshes for a use-case where we perform
multiple realtime gets at the same time on an active index. Currently,
we only call refresh if the index operation is still on the versionMap.
However, at the time we call refresh, that operation might be already or
will be included in the latest reader. Hence, we do not need to refresh.
Adding another lock here is not an issue as the refresh is already
sequential.
If we roll translog but do not index, then a flush without force is a
noop. In this case, the number of retained translog files will be higher
than the value specified by the retention policy.
Closes#4741
Usually syslog timestamps have two spaces before a single
digit day-of-month. However, in some non-syslog cases
where syslog-like timestamps are used there is only one
space. The grok pattern supports this, so the timestamp
parser should too. This change makes the
find_file_structure endpoint do this.
Also fixes another problem that the same test case
exposed in the find_file_structure endpoint, which was
that the exclude_lines_pattern for delimited files was
always created on the assumption the delimiter was a
comma. Now it is based on the actual delimiter.
This commit adds two APIs that allow to pause and resume
CCR auto-follower patterns:
// pause auto-follower
POST /_ccr/auto_follow/my_pattern/pause
// resume auto-follower
POST /_ccr/auto_follow/my_pattern/resume
The ability to pause and resume auto-follow patterns can be
useful in some situations, including the rolling upgrades of
cluster using a bi-directional cross-cluster replication scheme
(see #46665).
This commit adds a new active flag to the AutoFollowPattern
and adapts the AutoCoordinator and AutoFollower classes so
that it stops to fetch remote's cluster state when all auto-follow
patterns associate to the remote cluster are paused.
When an auto-follower is paused, remote indices that match the
pattern are just ignored: they are not added to the pattern's
followed indices uids list that is maintained in the local cluster
state. This way, when the auto-follow pattern is resumed the
indices created in the remote cluster in the meantime will be
picked up again and added as new following indices. Indices
created and then deleted in the remote cluster will be ignored
as they won't be seen at all by the auto-follower pattern at
resume time.
Backport of #47510 for 7.x
Previously, Nullability was set to UNKNOWN instead of TRUE which
resulted on QueryFolder not correctly folding to NULL if any of the args
was null.
Remove the overriding nullable() also for DatePart/DateTrunc to allow
delegation the parent class.
(cherry picked from commit 05a7108e133b5ae7bec2257db5ae2d30ad926ee2)
The distribution download plugin which handles finding built
distributions for testing currently only knows how to find locally built
snapshots. When an external Elasticsearch plugin uses build-tools, these
snapshots do not exist. This commit extends the download plugin so it
pulls from the Elastic snapshots service when used outside of the
Elasticsearch repository.
closes#47123
Joda was using ResolverStyle.STRICT when parsing. This means that date will be validated to be a correct year, year-of-month, day-of-month
However, we also want to make it works with Year-Of-Era as Joda used to, hence custom temporalquery.localdate in DateFormatters.from
Within DateFormatters we use the correct uuuu year instead of yyyy year of era
worth noting: if yyyy(without an era) is used in code, the parsing result will be a TemporalAccessor which will fail to be converted into LocalDate. We mostly use DateFormatters.from so this takes care of this. If possible the uuuu format should be used.
* [ML][Analytics] fix bug where regression deleted early does not delete state (#47885)
* [ML][Analytics] fix bug where regression deleted early does not delete state
* Fixing ml with security test failure
* fixing for older java
Marios Trivyzas
Hendrik Muhs
Przemysław Witek
James Rodewig
Benjamin Trent
David Roberts
Armin Braun
Martijn van Groningen
jimczi
Tanguy Leroux
Gordon Brown
James Baiera
Tim Brooks
Jake Landis
Michael Basnight
Ioannis Kakavas
Nhat Nguyen
Yogesh Gaikwad
Ryan Ernst
Przemyslaw Gomulka
Nick Knize
Chris Roberson