This commit makes `TransformIntegrationTests` into a standard integration test, as
opposed to using `TimeWarp`, which registers the mock component
`ScheduleEngineTriggerMock` to trigger watches.
The simplification may help with flakiness we've observed `TimeWarp, as in #37882.
The SchedulerEngine is used in several places in our code and not all
of these usages properly stopped the SchedulerEngine, which could lead
to test failures due to leaked threads from the SchedulerEngine. This
change adds stopping to these usages in order to avoid the thread leaks
that cause CI failures and noise.
Closes#38875
Currently remote compression and ping schedule settings are dynamic.
However, we do not listen for changes. This commit adds listeners for
changes to those two settings. Additionally, when those settings change
we now close existing connections and open new ones with the settings
applied.
Fixes#37201.
Sleeps in tests smell funny, and we try to avoid them to the extent
possible. We are using a small one in a CCR test. This commit clarifies
the purpose of that sleep by adding a comment explaining it. We also
removed a hard-coded value from the test, that if we ever modified the
value higher up where it was set, we could end up forgetting to change
the value here. Now we ensure that these would move in lock step if we
ever maintain them later.
We have some CCR tests where we use mock transport send rules to control
the behavior that we desire in these tests. Namely, we want to simulate
an exception being thrown on the leader side, or a variety of other
situations. These send rules were put in place between the data nodes on
each side. However, it might not be the case that these requests are
being sent between data nodes. For example, a request that is handled on
a non-data master node would not be sent from a data node. And it might
not be the case that the request is sent to a data node, as it could be
proxied through a non-data coordinating node. This commit addresses this
by putting these send rules in places between all nodes on each side.
Closes#39011Closes#39201
`ReadOnlyEngine` never recovers operations from translog and never
updates translog information in the index shard's recovery state, even
though the recovery state goes through the `TRANSLOG` stage during
the recovery. It means that recovery information for frozen shards indicates
an unkown number of recovered translog ops in the Recovery APIs
(translog_ops: `-1` and translog_ops_percent: `-1.0%`) and this is confusing.
This commit changes the `recoverFromTranslog()` method in `ReadOnlyEngine`
so that it always recover from an empty translog snapshot, allowing the recovery
state translog information to be correctly updated.
Related to #33888
Initially in #38910, ShardFollowTask was reusing ImmutableFollowParameters'
serialization logic. After merging, bwc tests failed sometimes and
the binary serialization that ShardFollowTask was originally was using
was added back. ImmutableFollowParameters is using optional fields (optional vint)
while ShardFollowTask was not (vint).
Today we always refresh when looking up the primary term in
FollowingEngine. This is not necessary for we can simply
return none for operations before the global checkpoint.
The follower won't always have the same history as the leader for its
soft-deletes retention can be different. However, if some operation
exists on the history of the follower, then the same operation must
exist on the leader. This change relaxes the history check in
ShardFollowTaskReplicationTests.
Closes#39093
This commit introduces the retention leases to ESIndexLevelReplicationTestCase,
then adds some tests verifying that the retention leases replication works
correctly in spite of the presence of the primary failover or out of order
delivery of retention leases sync requests.
Relates #37165
This change aims to fix failures in the session factory load balancing
tests that mock failure scenarios. For these tests, we randomly shut
down ldap servers and bind a client socket to the port they were
listening on. Unfortunately, we would occasionally encounter failures
in these tests where a socket was already in use and/or the port
we expected to connect to was wrong and in fact was to one of the ldap
instances that should have been shut down.
The failures are caused by the behavior of certain operating systems
when it comes to binding ports and wildcard addresses. It is possible
for a separate application to be bound to a wildcard address and still
allow our code to bind to that port on a specific address. So when we
close the server socket and open the client socket, we are still able
to establish a connection since the other application is already
listening on that port on a wildcard address. Another variant is that
the os will allow a wildcard bind of a server socket when there is
already an application listening on that port for a specific address.
In order to do our best to prevent failures in these scenarios, this
change does the following:
1. Binds a client socket to all addresses in an awaitBusy
2. Adds assumption that we could bind all valid addresses
3. In the case that we still establish a connection to an address that
we should not be able to, try to bind and expect a failure of not
being connected
Closes#32190
This commit fixes a broken CCR retention lease unfollow test. The
problem with the test is that the random subset of shards that we picked
to disrupt would not necessarily overlap with the actual shards in
use. We could take a non-empty subset of [0, 3] (e.g., { 2 }) when the
only shard IDs in use were [0, 1]. This commit fixes this by taking into
account the number of shards in use in the test.
With this change, we also take measure to ensure that a successful
branch is tested more frequently than would otherwise be the case. On
that branch, we want to sometimes pretend that the retention lease is
already removed. The randomness here was also sometimes selecting a
subset of shards that did not overlap with the shards actually in use
during the test. While this does not break the test, it is confusing and
reduces the amount of coverage of that branch.
Relates #39185
In most of the places we avoid creating the `.security` index (or updating the mapping)
for read/search operations. This is more of a nit for the case of the getRole call,
that fixes a possible mapping update during a get role, and removes a dead if branch
about creating the `.security` index.
This commit attempts to remove the retention leases on the leader shards
when unfollowing an index. This is best effort, since the leader might
not be available.
This defaults to "true" (current behavior) and will throw an exception
if there is a property that cannot be recognized. If "false", it will
ignore anything unrecognizable.
(cherry picked from commit 38fbf9792bcf4fe66bb3f17589e5fe6d29748d07)
The watcher trigger service could attempt to modify the perWatchStats
map simultaneously from multiple threads. This would cause the
internal state to become inconsistent, in particular the count()
method may return an incorrect value for the number of watches.
This changes replaces the implementation of the map with a
ConcurrentHashMap so that its internal state remains consistent even
when accessed from mutiple threads.
Backport of: #39092
The ML memory tracker does searches against ML results
and config indices. These searches can be asynchronous,
and if they are running while the node is closing then
they can cause problems for other components.
This change adds a stop() method to the MlMemoryTracker
that waits for in-flight searches to complete. Once
stop() has returned the MlMemoryTracker will not kick
off any new searches.
The MlLifeCycleService now calls MlMemoryTracker.stop()
before stopping stopping the node.
Fixes#37117
These two changes are interlinked.
Before this change unsetting ML upgrade mode would wait for all
datafeeds to be assigned and not waiting for their corresponding
jobs to initialise. However, this could be inappropriate, if
there was a reason other that upgrade mode why one job was unable
to be assigned or slow to start up. Unsetting of upgrade mode
would hang in this case.
This change relaxes the condition for considering upgrade mode to
be unset to simply that an assignment attempt has been made for
each ML persistent task that did not fail because upgrade mode
was enabled. Thus after unsetting upgrade mode there is no
guarantee that every ML persistent task is assigned, just that
each is not unassigned due to upgrade mode.
In order to make setting upgrade mode work immediately after
unsetting upgrade mode it was then also necessary to make it
possible to stop a datafeed that was not assigned. There was
no particularly good reason why this was not allowed in the past.
It is trivial to stop an unassigned datafeed because it just
involves removing the persistent task.
Prior to this commit, if during fetch leader / follower GCP
a fatal error occurred, then the shard follow task was removed.
This is unexpected, because if such an error occurs during the lifetime of shard follow task then replication is stopped and the fatal error flag is set. This allows the ccr stats api to report the fatal exception that has occurred (instead of the user grepping through the elasticsearch logs).
This issue was found by a rare failure of the `FollowStatsIT#testFollowStatsApiIncludeShardFollowStatsWithRemovedFollowerIndex` test.
Closes#38779
* Disable specific locales for tests in fips mode
The Bouncy Castle FIPS provider that we use for running our tests
in fips mode has an issue with locale sensitive handling of Dates as
described in https://github.com/bcgit/bc-java/issues/405
This causes certificate validation to fail if any given test that
includes some form of certificate validation happens to run in one
of the locales. This manifested earlier in #33081 which was
handled insufficiently in #33299
This change ensures that the problematic 3 locales
* th-TH
* ja-JP-u-ca-japanese-x-lvariant-JP
* th-TH-u-nu-thai-x-lvariant-TH
will not be used when running our tests in a FIPS 140 JVM. It also
reverts #33299
The .ml-annotations index is created asynchronously when
some other ML index exists. This can interfere with the
post-test index deletion, as the .ml-annotations index
can be created after all other indices have been deleted.
This change adds an ML specific post-test cleanup step
that runs before the main cleanup and:
1. Checks if any ML indices exist
2. If so, waits for the .ml-annotations index to exist
3. Deletes the other ML indices found in step 1.
4. Calls the super class cleanup
This means that by the time the main post-test index
cleanup code runs:
1. The only ML index it has to delete will be the
.ml-annotations index
2. No other ML indices will exist that could trigger
recreation of the .ml-annotations index
Fixes#38952
* Fix#38623 remove xpack namespace REST API
Except for xpack.usage and xpack.info API's, this moves the last remaining API's out of the xpack namespace
* rename xpack api's inside inside the files as well
* updated yaml tests references to xpack namespaces api's
* update callsApi calls in the IT subclasses
* make sure docs testing does not use xpack namespaced api's
* fix leftover xpack namespaced method names in docs/build.gradle
* found another leftover reference
(cherry picked from commit ccb5d934363c37506b76119ac050a254fa80b5e7)
The data frame plugin allows users to create feature indexes by pivoting a source index. In a
nutshell this can be understood as reindex supporting aggregations or similar to the so called entity
centric indexing.
Full history is provided in: feature/data-frame-transforms
* During fetching remote mapping if remote client is missing then
`NoSuchRemoteClusterException` was not handled.
* When adding remote connection, check that it is really connected
before continue-ing to run the tests.
Relates to #38695
Follow index in follow cluster that follows an index in the leader cluster and another
follow index in the leader index that follows that index in the follow cluster.
During the upgrade index following is paused and after the upgrade
index following is resumed and then verified index following works as expected.
Relates to #38037
This commit is the first step in integrating shard history retention
leases with CCR. In this commit we integrate shard history retention
leases with recovery from remote. Before we start transferring files, we
take out a retention lease on the primary. Then during the file copy
phase, we repeatedly renew the retention lease. Finally, when recovery
from remote is complete, we disable the background renewing of the
retention lease.
This commit adds a `ListenerTimeouts` class that will wrap a
`ActionListener` in a listener with a timeout scheduled on the generic
thread pool. If the timeout expires before the listener is completed,
`onFailure` will be called with an `ElasticsearchTimeoutException`.
Timeouts for the get ccr file chunk action are implemented using this
functionality. Additionally, this commit attempts to fix#38027 by also
blocking proxied get ccr file chunk actions. This test being un-muted is
useful to verify the timeout functionality.
Today when processing an operation on a replica engine (or the
following engine), we first add it to Lucene, then add it to translog,
then finally marks its seq_no as completed. If a flush occurs after step1,
but before step-3, the max_seq_no in the commit's user_data will be
smaller than the seq_no of some documents in the Lucene commit.
We verify seq_no_stats is aligned between copies at the end of some
disruption tests. Sometimes, the assertion `assertSeqNos` is tripped due
to a lagged global checkpoint on replicas. The global checkpoint on
replicas is lagged because we sync the global checkpoint 30 seconds (by
default) after the last replication operation. This change reduces the
global checkpoint sync-internal to 1s in the disruption tests.
Closes#38318Closes#36789
The CCR REST tests that rely on these assertions are flaky. They are
flaky since the introduction of recovery from the remote.
The underlying problem is this: these tests are making assertions about
the number of operations read by the shard following task. However, with
recovery from remote, we no longer have guarantees that the assumptions
these tests were relying on hold. Namely, these tests were assuming that
the only way that a document could land in the follower index is via the
shard following task. With recovery from remote, there is another way,
which is via the files that are copied over during the recovery
phase. Most of the time this will not be a problem because with the
small number of documents that we are indexing in these tests, it is
usally not the case that a flush would occur and so there would not be
any documents in the files copied over. However, a flush can occur any
time at which point all of the indexed documents could end up in a safe
commit and copied over during recovery from remote. This commit modifies
these assertions to ones that are not prone to this issue, yet still
validate the health of the follower shard.
Few tests failed intermittently and most of the
times due to invalidated or expired keys that were
deleted were still reported in search results.
This commit removes the test and adds enhancements
to other tests testing different scenario's.
When ExpiredApiKeysRemover is triggered, the tests
did not await its termination thereby sometimes
the results would be wrong for a search operation.
DELETE_INTERVAL setting has been further reduced to
100ms so we can trigger ExpiredApiKeysRemover faster.
Closes#38408
The rest of `CCRIT` is now no longer relevant, because the remaining
test tests the same of the index following test in the rolling upgrade
multi cluster module.
Added `tests.upgrade_from_version` version to test. It is not needed
in this branch, but is in 6.7 branch.
Closes#37231
The previous logic for concurrent file chunk fetching did not allow for multiple chunks from the same
file to be fetched in parallel. The parallelism only allowed to fetch chunks from different files in
parallel. This required complex logic on the follower to be aware from which file it was already
fetching information, in order to ensure that chunks for the same file would be fetched in sequential
order. During benchmarking, this exhibited throughput issues when recovery came towards the end,
where it would only be sequentially fetching chunks for the same largest segment file, with
throughput considerably going down in a high-latency network as there was no parallelism anymore.
The new logic here follows the peer recovery model more closely, and sends multiple requests for
the same file in parallel, and then reorders the results as necessary. Benchmarks show that this
leads to better overall throughput and the implementation is also simpler.
Backport of #38818 to `7.x`. Original description:
The HTTP exporter code in the Monitoring plugin makes `GET _template` requests to check for existence of templates. These requests don't need to pass the `include_type_name` query parameter so this PR removes it from the request. This should remove the following deprecation log entries on the Monitoring cluster in 7.0.0 onwards:
```
[types removal] Specifying include_type_name in get index template requests is deprecated.
```
This change makes the writing of new usage data conditional based on
the version that is being written to. A test has also been added to
ensure serialization works as expected to an older version.
Relates #38687, #38917
This change updates the authentication service to use a consistent view
of the realms based on the license state at the start of
authentication. Without this, the license can change during
authentication of a request and it will result in a failure if the
realm that extracted the token is no longer in the realm list. This
manifests in some tests as an authentication failure that should never
really happen; one example would be the test framework's transport
client user should always have a succesful authentication but in the
LicensingTests this can fail and will show up as a
NoNodeAvailableException.
Additionally, the licensing tests have been updated to ensure that
there is consistency when changing the license. The license is changed
by modifying the internal xpack license state on each node, which has
no protection against be changed by some pending cluster action. The
methods to disable and enable now ensure we have a green cluster and
that the cluster is consistent before returning.
Closes#30301
This changes the output of the `_cat/indices` API with `Security` enabled.
It is possible to only display the index name (and possibly the index
health, depending on the request options) but not its stats (doc count, merges,
size, etc). This is the case for closed indices which have index metadata in the
cluster state but no associated shards, hence no shard stats.
However, when `Security` is enabled, and the request contains wildcards,
**open** indices without stats are a common occurrence. This is because the
index names in the response table are picked up directly from the cluster state
which is not filtered by `Security`'s _indexNameExpressionResolver_, unlike the
stats data which is populated by the indices stats API which does go through the
index name resolver.
This is a bug, because it is circumventing `Security`'s function to hide
unauthorized indices.
This has been fixed by displaying the index names as they are resolved by the indices
stats API. The outputs of these two APIs is now very similar: same index names,
similar data but different format.
Closes#37190
Right now there is no way to determine whether the
token service or API key service is enabled or not.
This commit adds support for the enabled status of
token and API key service to the security feature set
usage API `/_xpack/usage`.
Closes#38535
The should fix the following NPE:
```
[2019-02-11T23:27:48,452][WARN ][o.e.p.PersistentTasksNodeService] [node_s_0] task kD8YzUhHTK6uKNBNQI-1ZQ-0 failed with an exception
1> java.lang.NullPointerException: null
1> at org.elasticsearch.xpack.ccr.action.ShardFollowTasksExecutor.lambda$fetchFollowerShardInfo$7(ShardFollowTasksExecutor.java:305) ~[main/:?]
1> at org.elasticsearch.action.ActionListener$1.onResponse(ActionListener.java:61) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.action.support.TransportAction$1.onResponse(TransportAction.java:68) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.action.support.TransportAction$1.onResponse(TransportAction.java:64) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.action.support.broadcast.node.TransportBroadcastByNodeAction$AsyncAction.onCompletion(TransportBroadcastByNodeAction.java:383) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.action.support.broadcast.node.TransportBroadcastByNodeAction$AsyncAction.onNodeResponse(TransportBroadcastByNodeAction.java:352) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.action.support.broadcast.node.TransportBroadcastByNodeAction$AsyncAction$1.handleResponse(TransportBroadcastByNodeAction.java:324) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.action.support.broadcast.node.TransportBroadcastByNodeAction$AsyncAction$1.handleResponse(TransportBroadcastByNodeAction.java:314) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.transport.TransportService$ContextRestoreResponseHandler.handleResponse(TransportService.java:1108) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.transport.TransportService$DirectResponseChannel.processResponse(TransportService.java:1189) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.transport.TransportService$DirectResponseChannel.sendResponse(TransportService.java:1169) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.transport.TaskTransportChannel.sendResponse(TaskTransportChannel.java:54) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.action.support.broadcast.node.TransportBroadcastByNodeAction$BroadcastByNodeTransportRequestHandler.messageReceived(TransportBroadcastByNodeAction.java:417) [elasticsearch-8.0.0-SNAP
SHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.action.support.broadcast.node.TransportBroadcastByNodeAction$BroadcastByNodeTransportRequestHandler.messageReceived(TransportBroadcastByNodeAction.java:391) [elasticsearch-8.0.0-SNAP
SHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.transport.RequestHandlerRegistry.processMessageReceived(RequestHandlerRegistry.java:63) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.transport.TransportService$7.doRun(TransportService.java:687) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.common.util.concurrent.ThreadContext$ContextPreservingAbstractRunnable.doRun(ThreadContext.java:751) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at org.elasticsearch.common.util.concurrent.AbstractRunnable.run(AbstractRunnable.java:37) [elasticsearch-8.0.0-SNAPSHOT.jar:8.0.0-SNAPSHOT]
1> at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149) [?:1.8.0_202]
1> at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624) [?:1.8.0_202]
1> at java.lang.Thread.run(Thread.java:748) [?:1.8.0_202]
```
Relates to #38779
* Add rolling upgrade multi cluster test module (#38277)
This test starts 2 clusters, each with 3 nodes.
First the leader cluster is started and tests are run against it and
then the follower cluster is started and tests execute against this two cluster.
Then the follower cluster is upgraded, one node at a time.
After that the leader cluster is upgraded, one node at a time.
Every time a node is upgraded tests are ran while both clusters are online.
(and either leader cluster has mixed node versions or the follower cluster)
This commit only tests CCR index following, but could be used for CCS tests as well.
In particular for CCR, unidirectional index following is tested during a rolling upgrade.
During the test several indices are created and followed in the leader cluster before or
while the follower cluster is being upgraded.
This tests also verifies that attempting to follow an index in the upgraded cluster
from the not upgraded cluster fails. After both clusters are upgraded following the
index that previously failed should succeed.
Relates to #37231 and #38037
* Filter out upgraded version index settings when starting index following (#38838)
The `index.version.upgraded` and `index.version.upgraded_string` are likely
to be different between leader and follower index. In the event that
a follower index gets restored on a upgraded node while the leader index
is still on non-upgraded nodes.
Closes#38835
When shutting down Watcher, the `bulkProcessor` is null if watcher has been
disabled in the configuration. This protects the flush and close calls with a
check for watcher enabled to avoid a NullPointerException
Resolves#38798
Currently we index documents concurrently to attempt to ensure that we
update mappings during the restore process. However, this does not
actually test that the mapping will be correct and is dangerous as it
can lead to a misalignment between the max sequence number and the local
checkpoint. If these are not aligned, peer recovery cannot be completed
without initiating following which this test does not do. That causes
teardown assertions to fail.
This commit removes the concurrent indexing and flushes after the
documents are indexed. Additionally it modifies the mapping specific
test to ensure that there is a mapping update when the restore session
is initiated. This mapping update is picked up at the end of the restore
by the follower.
Instead of using `WarningsHandler.PERMISSIVE`, we only match warnings
that are due to types removal.
This PR also renames `allowTypeRemovalWarnings` to `allowTypesRemovalWarnings`.
Relates to #37920.
Forward port of https://github.com/elastic/elasticsearch/pull/38757
This change reverts the initial 7.0 commits and replaces them
with the 6.7 variant that still allows for the ecs flag.
This commit differs from the 6.7 variants in that ecs flag will
now default to true.
6.7: `ecs` : default `false`
7.x: `ecs` : default `true`
8.0: no option, but behaves as `true`
* Revert "Ingest node - user agent, move device to an object (#38115)"
This reverts commit 5b008a34aa.
* Revert "Add ECS schema for user-agent ingest processor (#37727) (#37984)"
This reverts commit cac6b8e06f.
* cherry-pick 5dfe1935345da3799931fd4a3ebe0b6aa9c17f57
Add ECS schema for user-agent ingest processor (#37727)
* cherry-pick ec8ddc890a34853ee8db6af66f608b0ad0cd1099
Ingest node - user agent, move device to an object (#38115) (#38121)
* cherry-pick f63cbdb9b426ba24ee4d987ca767ca05a22f2fbb (with manual merge fixes)
Dep. check for ECS changes to User Agent processor (#38362)
* make true the default for the ecs option, and update 7.0 references and tests
Change the formatting for Watcher.status.lastCheck and lastMetCondition
to be the same as Watcher.status.state.timestamp. These should all have
only millisecond precision
closes#38619
backport #38626
There were two documents (seq=2 and seq=103) missing on the follower in
one of the failures of `testFailOverOnFollower`. I spent several hours
on that failure but could not figure out the reason. I adjust log and
unmute this test so we can collect more information.
Relates #38633
This change removes the pinning of TLSv1.2 in the
SSLConfigurationReloaderTests that had been added to workaround an
issue with the MockWebServer and Apache HttpClient when using TLSv1.3.
The way HttpClient closes the socket causes issues with the TLSv1.3
SSLEngine implementation that causes the MockWebServer to loop
endlessly trying to send the close message back to the client. This
change wraps the created http connection in a way that allows us to
override the closing behavior of HttpClient.
An upstream request with HttpClient has been opened at
https://issues.apache.org/jira/browse/HTTPCORE-571 to see if the method
of closing can be special cased for SSLSocket instances.
This is caused by a JDK bug, JDK-8214418 which is fixed by
https://hg.openjdk.java.net/jdk/jdk12/rev/5022a4915fe9.
Relates #38646
`<expression>::<dataType>` is a simplified altenative syntax to
`CAST(<expression> AS <dataType> which exists in PostgreSQL and
provides an improved user experience and possibly more compact
SQL queries.
Fixes: #38717
fix tests to use clock in milliseconds precision in watcher code
make sure the date comparison in string format is using same formatters
some of the code was modified in #38514 possibly because of merge conflicts
closes#38581
Backport #38738
The java time formatter used in the exporter adds a plus sign to the
year, if a year with more than five digits is used. This changes the
creation of those timestamp to only have a date up to 9999.
Closes#38378
The Close Index API has been refactored in 6.7.0 and it now performs
pre-closing sanity checks on shards before an index is closed: the maximum
sequence number must be equals to the global checkpoint. While this is a
strong requirement for regular shards, we identified the need to relax this
check in the case of CCR following shards.
The following shards are not in charge of managing the max sequence
number or global checkpoint, which are pulled from a leader shard. They
also fetch and process batches of operations from the leader in an unordered
way, potentially leaving gaps in the history of ops. If the following shard lags
a lot it's possible that the global checkpoint and max seq number never get
in sync, preventing the following shard to be closed and a new PUT Follow
action to be issued on this shard (which is our recommended way to
resume/restart a CCR following).
This commit allows each Engine implementation to define the specific
verification it must perform before closing the index. In order to allow
following/frozen/closed shards to be closed whatever the max seq number
or global checkpoint are, the FollowingEngine and ReadOnlyEngine do
not perform any check before the index is closed.
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
Added a constructor accepting `StreamInput` as argument, which allowed to
make most of the instance members final as well as remove the default
constructor.
Removed a test only constructor in favour of invoking the existing
constructor that takes a `SearchRequest` as first argument.
Also removed profile members and related methods as they were all unused.
* Rename integTest to bwcTestSample for bwc test projects
This change renames the `integTest` task to `bwcTestSample` for projects
testing bwc to make it possible to run all the bwc tests that check
would run without running on bwc tests.
This change makes it possible to add a new PR check on backports to make
sure these don't break BWC tests in master.
* Rename task as per PR
The test was relying on toString in ZonedDateTime which is different to
what is formatted by strict_date_time when milliseconds are 0
The method is just delegating to dateFormatter, so that scenario should
be covered there.
closes#38359
Backport #38610
* Enhance parsing of StatusCode in SAML Responses
<Status> elements in a failed response might contain two nested
<StatusCode> elements. We currently only parse the first one in
order to create a message that we attach to the Exception we return
and log. However this is generic and only gives out informarion
about whether the SAML IDP believes it's an error with the
request or if it couldn't handle the request for other reasons. The
encapsulated StatusCode has a more interesting error message that
potentially gives out the actual error as in Invalid nameid policy,
authentication failure etc.
This change ensures that we print that information also, and removes
Message and Details fields from the message when these are not
part of the Status element (which quite often is the case)
When the millisecond part of a timestamp is 0 the toString
representation in java-time is omitting the millisecond part (joda was
not). The Search response is returning timestamps formatted with
WatcherDateTimeUtils, therefore comparisons of strings should be done
with the same formatter
relates #27330
BackPort #38505
Adds the ability to fetch chunks from different files in parallel, configurable using the new `ccr.indices.recovery.max_concurrent_file_chunks` setting, which defaults to 5 in this PR.
The implementation uses the parallel file writer functionality that is also used by peer recoveries.
Improve verifier to disallow grouping over grouping functions (e.g.
HISTOGRAM over HISTOGRAM).
Close#38308
(cherry picked from commit 4e9b1cfd4df38c652bba36b4b4b538ce7c714b6e)
Constant numbers (of any form: integers, decimals, negatives,
scientific) and strings shouldn't increase the depth counters
as they don't contribute to the increment of the stack depth.
Fixes: #38571
* ML: update set_upgrade_mode, add logging
* Attempt to fix datafeed isolation
Also renamed a few methods/variables for clarity and added
some comments
This commit adds the 7.1 version constant to the 7.x branch.
Co-authored-by: Andy Bristol <andy.bristol@elastic.co>
Co-authored-by: Tim Brooks <tim@uncontended.net>
Co-authored-by: Christoph Büscher <cbuescher@posteo.de>
Co-authored-by: Luca Cavanna <javanna@users.noreply.github.com>
Co-authored-by: markharwood <markharwood@gmail.com>
Co-authored-by: Ioannis Kakavas <ioannis@elastic.co>
Co-authored-by: Nhat Nguyen <nhat.nguyen@elastic.co>
Co-authored-by: David Roberts <dave.roberts@elastic.co>
Co-authored-by: Jason Tedor <jason@tedor.me>
Co-authored-by: Alpar Torok <torokalpar@gmail.com>
Co-authored-by: David Turner <david.turner@elastic.co>
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
Co-authored-by: Tim Vernum <tim@adjective.org>
Co-authored-by: Albert Zaharovits <albert.zaharovits@gmail.com>
- Add resolution to the exact keyword field (if exists) for text fields.
- Add proper verification and error message if underlying keyword
doesn'texist.
- Move check for field attribute in the comparison list to the
`resolveType()` method of `IN`.
Fixes: #38424
In #38333 and #38350 we moved away from the `discovery.zen` settings namespace
since these settings have an effect even though Zen Discovery itself is being
phased out. This change aligns the documentation and the names of related
classes and methods with the newly-introduced naming conventions.
Aliases defined in SELECT (Project or Aggregate) are now resolved in the
following WHERE clause. The Analyzer has been enhanced to identify this
rule and replace the field accordingly.
Close#29983
We have had various reports of problems caused by the maxRetryTimeout
setting in the low-level REST client. Such setting was initially added
in the attempts to not have requests go through retries if the request
already took longer than the provided timeout.
The implementation was problematic though as such timeout would also
expire in the first request attempt (see #31834), would leave the
request executing after expiration causing memory leaks (see #33342),
and would not take into account the http client internal queuing (see #25951).
Given all these issues, it seems that this custom timeout mechanism
gives little benefits while causing a lot of harm. We should rather rely
on connect and socket timeout exposed by the underlying http client
and accept that a request can overall take longer than the configured
timeout, which is the case even with a single retry anyways.
This commit removes the `maxRetryTimeout` setting and all of its usages.
This commit adds an authentication cache for API keys that caches the
hash of an API key with a faster hash. This will enable better
performance when API keys are used for bulk or heavy searching.
I have not been able to reproduce the failing
test scenario locally for #38408 and there are other similar
tests which are running fine in the same test class.
I am re-enabling the test with additional logs so
that we can debug further on what's happening.
I will keep the issue open for now and look out for the builds
to see if there are any related failures.
This is related to #35975. We do not want a slow master to fail a
recovery from remote process due to a slow put mappings call. This
commit increases the master node timeout on this call to 30 mins.
`waitForRollUpJob` is an assertBusy that waits for the rollup job
to appear in the tasks list, and waits for it to be a certain state.
However, there was a null check around the state assertion, which meant
if the job _was_ null, the assertion would be skipped, and the
assertBusy would pass withouot an exception. This could then lead to
downstream assertions to fail because the job was not actually ready,
or in the wrong state.
This changes the test to assert the job is not null, so the assertBusy
operates as intended.
Since introduction of data types that don't have a corresponding type
in ES the `esType` is error-prone when used for `unmappedType()` calls.
Moreover since the renaming of `DATE` to `DATETIME` and the introduction
of an actual date-only `DATE` the `esType` would return `datetime` which
is not a valid type for ES mapping.
Fixes: #38051
For some users, the built in authorization mechanism does not fit their
needs and no feature that we offer would allow them to control the
authorization process to meet their needs. In order to support this,
a concept of an AuthorizationEngine is being introduced, which can be
provided using the security extension mechanism.
An AuthorizationEngine is responsible for making the authorization
decisions about a request. The engine is responsible for knowing how to
authorize and can be backed by whatever mechanism a user wants. The
default mechanism is one backed by roles to provide the authorization
decisions. The AuthorizationEngine will be called by the
AuthorizationService, which handles more of the internal workings that
apply in general to authorization within Elasticsearch.
In order to support external authorization services that would back an
authorization engine, the entire authorization process has become
asynchronous, which also includes all calls to the AuthorizationEngine.
The use of roles also leaked out of the AuthorizationService in our
existing code that is not specifically related to roles so this also
needed to be addressed. RequestInterceptor instances sometimes used a
role to ensure a user was not attempting to escalate their privileges.
Addressing this leakage of roles meant that the RequestInterceptor
execution needed to move within the AuthorizationService and that
AuthorizationEngines needed to support detection of whether a user has
more privileges on a name than another. The second area where roles
leaked to the user is in the handling of a few privilege APIs that
could be used to retrieve the user's privileges or ask if a user has
privileges to perform an action. To remove the leakage of roles from
these actions, the AuthorizationService and AuthorizationEngine gained
methods that enabled an AuthorizationEngine to return the response for
these APIs.
Ultimately this feature is the work included in:
#37785#37495#37328#36245#38137#38219Closes#32435
Elasticsearch has long [supported](https://www.elastic.co/guide/en/elasticsearch/reference/current/docs-index_.html#index-versioning) compare and set (a.k.a optimistic concurrency control) operations using internal document versioning. Sadly that approach is flawed and can sometime do the wrong thing. Here's the relevant excerpt from the resiliency status page:
> When a primary has been partitioned away from the cluster there is a short period of time until it detects this. During that time it will continue indexing writes locally, thereby updating document versions. When it tries to replicate the operation, however, it will discover that it is partitioned away. It won’t acknowledge the write and will wait until the partition is resolved to negotiate with the master on how to proceed. The master will decide to either fail any replicas which failed to index the operations on the primary or tell the primary that it has to step down because a new primary has been chosen in the meantime. Since the old primary has already written documents, clients may already have read from the old primary before it shuts itself down. The version numbers of these reads may not be unique if the new primary has already accepted writes for the same document
We recently [introduced](https://www.elastic.co/guide/en/elasticsearch/reference/6.x/optimistic-concurrency-control.html) a new sequence number based approach that doesn't suffer from this dirty reads problem.
This commit removes support for internal versioning as a concurrency control mechanism in favor of the sequence number approach.
Relates to #1078
Currently the snapshot/restore process manually sets the global
checkpoint to the max sequence number from the restored segements. This
does not work for Ccr as this will lead to documents that would be
recovered in the normal followering operation from being recovered.
This commit fixes this issue by setting the initial global checkpoint to
the existing local checkpoint.
`CreateIndexRequest#source(Map<String, Object>, ... )`, which is used when
deserializing index creation requests, accidentally accepts mappings that are
nested twice under the type key (as described in the bug report #38266).
This in turn causes us to be too lenient in parsing typeless mappings. In
particular, we accept the following index creation request, even though it
should not contain the type key `_doc`:
```
PUT index?include_type_name=false
{
"mappings": {
"_doc": {
"properties": { ... }
}
}
}
```
There is a similar issue for both 'put templates' and 'put mappings' requests
as well.
This PR makes the minimal changes to detect and reject these typed mappings in
requests. It does not address #38266 generally, or attempt a larger refactor
around types in these server-side requests, as I think this should be done at a
later time.
The backport of #38022 introduced types-deprecation warning for get/put template requests
that cause problems on tests master in mixed cluster scenarios. While these warnings are
caught and ignored in regular Rest tests, the get template requests in XPackRestTestHelper
were missed.
Closes#38412
Tests can override assertToXContentEquivalence() in case their xcontent
cannot be directly compared (e.g. due to insertion order in maps
affecting the xcontent ordering). But the `testHlrcFromXContent` test
hardcoded the equivalence test to `true` instead of consulting
`assertToXContentEquivalence()`
Fixes#36034
With this change we no longer support pluggable discovery implementations. No
known implementations of `DiscoveryPlugin` actually override this method, so in
practice this should have no effect on the wider world. However, we were using
this rather extensively in tests to provide the `test-zen` discovery type. We
no longer need a separate discovery type for tests as we no longer need to
customise its behaviour.
Relates #38410
the clock resolution changed from jdk8->jdk10, hence the test is passing
in jdk8 but failing in jdk10. The Watcher's objects are serialised and
deserialised with milliseconds precision, making test to fail in jdk 10
and higher
closes#38400
The test is now expected to be always passing no matter what the random
locale is. This is fixed with using jdk ZoneId.systemDefault() in both
the test and CronEvalTool
closes#35687
If a job cannot be assigned to a node because an index it
requires is unavailable and there are lazy ML nodes then
index unavailable should be reported as the assignment
explanation rather than waiting for a lazy ML node.
Introduced FollowParameters class that put follow, resume follow,
put auto follow pattern requests and follow info response classes reuse.
The FollowParameters class had the fields, getters etc. for the common parameters
that all these APIs have. Also binary and xcontent serialization /
parsing is handled by this class.
The follow, resume follow, put auto follow pattern request classes originally
used optional non primitive fields, so FollowParameters has that too and the follow info api can handle that now too.
Also the followerIndex field can in production only be specified via
the url path. If it is also specified via the request body then
it must have the same value as is specified in the url path. This
option only existed to xcontent testing. However the AbstractSerializingTestCase
base class now also supports createXContextTestInstance() to provide
a different test instance when testing xcontent, so allowing followerIndex
to be specified via the request body is no longer needed.
By moving the followerIndex field from Body to ResumeFollowAction.Request
class and not allowing the followerIndex field to be specified via
the request body the Body class is redundant and can be removed. The
ResumeFollowAction.Request class can then directly use the
FollowParameters class.
For consistency I also removed the ability to specified followerIndex
in the put follow api and the name in put auto follow pattern api via
the request body.
Authn is enabled only if `license_type` is non `basic`, but `basic` is
what the `LicenseService` generates implicitly. This commit explicitly sets
license type to `trial`, which allows for authn, in the `SecuritySettingsSource`
which is the settings configuration parameter for `InternalTestCluster`s.
The real problem, that had created tests failures like #31028 and #32685, is
that the check `licenseState.isAuthAllowed()` can change sporadically. If it were
to return `true` or `false` during the whole test there would be no problem.
The problem manifests when it turns from `true` to `false` right before `Realms.asList()`.
There are other license checks before this one (request filter, token service, etc)
that would not cause a problem if they would suddenly see the check as `false`.
But switching to `false` before `Realms.asList()` makes it appear that no installed
realms could have handled the authn token which is an authentication error, as can
be seen in the failing tests.
Closes#31028#32685
Renames the following settings to remove the mention of `zen` in their names:
- `discovery.zen.hosts_provider` -> `discovery.seed_providers`
- `discovery.zen.ping.unicast.concurrent_connects` -> `discovery.seed_resolver.max_concurrent_resolvers`
- `discovery.zen.ping.unicast.hosts.resolve_timeout` -> `discovery.seed_resolver.timeout`
- `discovery.zen.ping.unicast.hosts` -> `discovery.seed_addresses`
* Adding apm_user
* Fixing SecurityDocumentationIT testGetRoles test
* Adding access to .ml-anomalies-*
* Fixing APM test, we don't have access to the ML state index
X-Pack security supports built-in authentication service
`token-service` that allows access tokens to be used to
access Elasticsearch without using Basic authentication.
The tokens are generated by `token-service` based on
OAuth2 spec. The access token is a short-lived token
(defaults to 20m) and refresh token with a lifetime of 24 hours,
making them unsuitable for long-lived or recurring tasks where
the system might go offline thereby failing refresh of tokens.
This commit introduces a built-in authentication service
`api-key-service` that adds support for long-lived tokens aka API
keys to access Elasticsearch. The `api-key-service` is consulted
after `token-service` in the authentication chain. By default,
if TLS is enabled then `api-key-service` is also enabled.
The service can be disabled using the configuration setting.
The API keys:-
- by default do not have an expiration but expiration can be
configured where the API keys need to be expired after a
certain amount of time.
- when generated will keep authentication information of the user that
generated them.
- can be defined with a role describing the privileges for accessing
Elasticsearch and will be limited by the role of the user that
generated them
- can be invalidated via invalidation API
- information can be retrieved via a get API
- that have been expired or invalidated will be retained for 1 week
before being deleted. The expired API keys remover task handles this.
Following are the API key management APIs:-
1. Create API Key - `PUT/POST /_security/api_key`
2. Get API key(s) - `GET /_security/api_key`
3. Invalidate API Key(s) `DELETE /_security/api_key`
The API keys can be used to access Elasticsearch using `Authorization`
header, where the auth scheme is `ApiKey` and the credentials, is the
base64 encoding of API key Id and API key separated by a colon.
Example:-
```
curl -H "Authorization: ApiKey YXBpLWtleS1pZDphcGkta2V5" http://localhost:9200/_cluster/health
```
Closes#34383
We mention in our documentation for the token
expiration configuration maximum value is 1 hour
but do not enforce it. This commit adds max limit
to the TOKEN_EXPIRATION setting.
This test should not pass until CCR finishes integrating shard history
retention leases. It currently sometimes passes (which is a bug in the
test), but cannot pass reliably until the linked issue is resolved.
There are two issues regarding the way that we sync mapping from leader
to follower when a ccr restore is completed:
1. The returned mapping from a cluster service might not be up to date
as the mapping of the restored index commit.
2. We should not compare the mapping version of the follower and the
leader. They are not related to one another.
Moreover, I think we should only ensure that once the restore is done,
the mapping on the follower should be at least the mapping of the copied
index commit. We don't have to sync the mapping which is updated after
we have opened a session.
Relates #36879Closes#37887
This is related to #35975. Currently when an index falls behind a leader
it encounters a fatal exception. This commit adds a test for that
scenario. Additionally, it tests that the user can stop following, close
the follower index, and put follow again. After the indexing is
re-bootstrapped, it will recover the documents it lost in normal
following operations.
This commit fixes the pinning of SSLContexts to TLSv1.2 in the
SSLConfigurationReloaderTests. The pinning was added for the initial
creation of clients and webservers but the updated contexts would
default to TLSv1.3, which is known to cause hangs with the
MockWebServer that we use.
Relates #38103Closes#38247
This PR removes the use of document types from the monitoring exporters and template + watches setup code.
It does not remove the notion of types from the monitoring bulk API endpoint "front end" code as that code will eventually just go away in 8.0 and be replaced with Beats as collectors/shippers directly to the monitoring cluster.
At times, we need to check for usage of deprecated settings in settings
which should not be returned by the NodeInfo API. This commit changes
the deprecation info API to run all node checks locally so that these
settings can be checked without exposing them via any externally
accessible API.
This commit introduces a background sync for retention leases. The idea
here is that we do a heavyweight sync when adding a new retention lease,
and then periodically we want to background sync any retention lease
renewals to the replicas. As long as the background sync interval is
significantly lower than the extended lifetime of a retention lease, it
is okay if from time to time a replica misses a sync (it will still have
an older version of the lease that is retaining more data as we assume
that renewals do not decrease the retaining sequence number). There are
two follow-ups that will come after this commit. The first is to address
the fact that we have not adapted the should periodically flush logic to
possibly flush the retention leases. We want to do something like flush
if we have not flushed in the last five minutes and there are renewed
retention leases since the last time that we flushed. An additional
follow-up will remove the syncing of retention leases when a retention
lease expires. Today this sync could be invoked in the background by a
merge operation. Rather, we will move the syncing of retention lease
expiration to be done under the background sync. The background sync
will use the heavyweight sync (write action) if a lease has expired, and
will use the lightweight background sync (replication action) otherwise.
The explanation so far can be invaluable for troubleshooting
as incorrect decisions made early on in the structure analysis
can result in seemingly crazy decisions or timeouts later on.
Relates elastic/kibana#29821
Today the following settings in the `discovery.zen` namespace are still used:
- `discovery.zen.no_master_block`
- `discovery.zen.hosts_provider`
- `discovery.zen.ping.unicast.concurrent_connects`
- `discovery.zen.ping.unicast.hosts.resolve_timeout`
- `discovery.zen.ping.unicast.hosts`
This commit deprecates all other settings in this namespace so that they can be
removed in the next major version.
It would be beneficial to apply some of the request interceptors even
when features are disabled. This change reworks the way we build that
list so that the interceptors we always want to use are constructed
outside of the settings check.
Instead of throwing an exception, use an unresolved attribute to pass
the message to the Verifier.
Additionally improve the parser to save the extended source for the
Aggregate and OrderBy.
Close#38208
The culprit in #38097 is an `IndicesRequest` that has no indices,
but instead of `request.indices()` returning `null` or `String[0]`
it returned `String[] {null}` . This tripped the audit filter.
I have addressed this in two ways:
1. `request.indices()` returning `String[] {null}` is treated as `null`
or `String[0]`, i.e. no indices
2. `null` values among the roles and indices lists, which are
unexpected, will never again stumble the audit filter; `null` values
are treated as special values that will not match any policy,
i.e. their events will always be printed.
Closes#38097
* Add checks for Grouping functions restriction to be placed inside GROUP BY
* Fixed bug where GROUP BY HISTOGRAM (not using alias) wasn't recognized
properly in the Verifier due to functions equality not working correctly.
Adds a Step to the Shrink and Delete actions which prevents those
actions from running on a leader index - all follower indices must first
unfollow the leader index before these actions can run. This prevents
the loss of history before follower indices are ready, which might
otherwise result in the loss of data.
Introduce client-side sorting of groups based on aggregate
functions. To allow this, the Analyzer has been extended to push down
to underlying Aggregate, aggregate function and the Querier has been
extended to identify the case and consume the results in order and sort
them based on the given columns.
The underlying QueryContainer has been slightly modified to allow a view
of the underlying values being extracted as the columns used for sorting
might not be requested by the user.
The PR also adds minor tweaks, mainly related to tree output.
Close#35118
Because concurrent sync requests from a primary to its replicas could be
in flight, it can be the case that an older retention leases collection
arrives and is processed on the replica after a newer retention leases
collection has arrived and been processed. Without a defense, in this
case the replica would overwrite the newer retention leases with the
older retention leases. This commit addresses this issue by introducing
a versioning scheme to retention leases. This versioning scheme is used
to resolve out-of-order processing on the replica. We persist this
version into Lucene and restore it on recovery. The encoding of
retention leases is starting to get a little ugly. We can consider
addressing this in a follow-up.
There was a bug where creating a new policy would start
the ILM service, even if it was stopped. This change ensures
that there is no change to the existing operation mode
This suite still fails one per week sometimes with a worrying assertion.
Sadly we are still unable to find the actual source.
Expected: <SeqNoStats{maxSeqNo=229, localCheckpoint=86, globalCheckpoint=86}>
but: was <SeqNoStats{maxSeqNo=229, localCheckpoint=-1, globalCheckpoint=86}>
This change enables trace log in the suite so we will have a better
picture if this fails again.
Relates #3333
This PR removes the temporary change we made to the yml test harness in #37285
to automatically set `include_type_name` to `true` in index creation requests
if it's not already specified. This is possible now that the vast majority of
index creation requests were updated to be typeless in #37611. A few additional
tests also needed updating here.
Additionally, this PR updates the test harness to set `include_type_name` to
`false` in index creation requests when communicating with 6.x nodes. This
mirrors the logic added in #37611 to allow for typeless document write requests
in test set-up code. With this update in place, we can remove many references
to `include_type_name: false` from the yml tests.
Unlike assertBusy, awaitBusy does not retry if the code-block throws an
AssertionError. A refresh in atLeastDocsIndexed can fail because we call
this method while we are closing some node in FollowerFailOverIT.
This PR adds the `monitor/xpack/info` cluster-level privilege to the built-in `monitoring_user` role.
This privilege is required for the Monitoring UI to call the `GET _xpack API` on the Monitoring Cluster. It needs to do this in order to determine the license of the Monitoring Cluster, which further determines whether Cluster Alerts are shown to the user or not.
Resolves#37970.
In 7.x Java timestamp formats are the default timestamp format and
there is no need to prefix them with "8". (The "8" prefix was used
in 6.7 to distinguish Java timestamp formats from Joda timestamp
formats.)
This change removes the "8" prefixes from timestamp formats in the
output of the ML file structure finder.
This commit enables the use of TLSv1.3 with security by enabling us to
properly map `TLSv1.3` in the supported protocols setting to the
algorithm for a SSLContext. Additionally, we also enable TLSv1.3 by
default on JDKs that support it.
An issue was uncovered with the MockWebServer when TLSv1.3 is used that
ultimately winds up in an endless loop when the client does not trust
the server's certificate. Due to this, SSLConfigurationReloaderTests
has been pinned to TLSv1.2.
Closes#32276
In 6.3 trial licenses were changed to default to security
disabled, and ee added some heuristics to detect when security should
be automatically be enabled if `xpack.security.enabled` was not set.
This change removes those heuristics, and requires that security be
explicitly enabled (via the `xpack.security.enabled` setting) for
trial licenses.
Relates: #38009
Currently we use the raw byte array length when calling the IndexInput
read call to determine how many bytes we want to read. However, due to
how BigArrays works, the array length might be longer than the reference
length. This commit fixes the issue and uses the BytesRef length when
calling read. Additionally, it expands the index follow test to index
many more documents. These documents should potentially lead to large
enough segment files to trigger scenarios where this fix matters.
Scheduler.schedule(...) would previously assume that caller handles
exception by calling get() on the returned ScheduledFuture.
schedule() now returns a ScheduledCancellable that no longer gives
access to the exception. Instead, any exception thrown out of a
scheduled Runnable is logged as a warning.
This is a continuation of #28667, #36137 and also fixes#37708.
FIRST and LAST can be used with one argument and work similarly to MIN
and MAX but they are implemented using a Top Hits aggregation and
therefore can also operate on keyword fields. When a second argument is
provided then they return the first/last value of the first arg when its
values are ordered ascending/descending (respectively) by the values of
the second argument. Currently because of the usage of a Top Hits
aggregation FIRST and LAST cannot be used in the HAVING clause of a
GROUP BY query to filter on the results of the aggregation.
Closes: #35639
With #37566 we have introduced the ability to merge multiple search responses into one. That makes it possible to expose a new way of executing cross-cluster search requests, that makes CCS much faster whenever there is network latency between the CCS coordinating node and the remote clusters. The coordinating node can now send a single search request to each remote cluster, which gets reduced by each one of them. from + size results are requested to each cluster, and the reduce phase in each cluster is non final (meaning that buckets are not pruned and pipeline aggs are not executed). The CCS coordinating node performs an additional, final reduction, which produces one search response out of the multiple responses received from the different clusters.
This new execution path will be activated by default for any CCS request unless a scroll is provided or inner hits are requested as part of field collapsing. The search API accepts now a new parameter called ccs_minimize_roundtrips that allows to opt-out of the default behaviour.
Relates to #32125
* Added SSL configuration options tests
Removed the allow.self.signed option from the documentation since we allow
by default self signed certificates as well.
* Added more tests
The existing implementation was slow due to exceptions being thrown if
an accessor did not have a time zone. This implementation queries for
having a timezone, local time and local date and also checks for an
instant preventing to throw an exception and thus speeding up the conversion.
This removes the existing method and create a new one named
DateFormatters.from(TemporalAccessor accessor) to resemble the naming of
the java time ones.
Before this change an epoch millis parser using the toZonedDateTime
method took approximately 50x longer.
Relates #37826
* move watcher to seq# occ
* top level set
* fix parsing and missing setters
* share toXContent for PutResponse and rest end point
* fix redacted password
* fix username reference
* fix deactivate-watch.asciidoc have seq no references
* add seq# + term to activate-watch.asciidoc
* more doc fixes
This commit fixes the test case that ensures only a priority
less then 0 is used with testNonPositivePriority. This also
allows the HLRC to support a value of 0.
Closes#37652
Previously, ShrinkAction would fail if
it was executed on an index that had
the same number of shards as the target
shrunken number.
This PR introduced a new BranchingStep that
is used inside of ShrinkAction to branch which
step to move to next, depending on the
shard values. So no shrink will occur if the
shard count is unchanged.
This commit allows implementors of the `HandledTransportAction` to
specify what thread the action should be executed on. The motivation for
this commit is that certain CCR requests should be performed on the
generic threadpool.
The apache commons http client implementations recently released
versions that solve TLS compatibility issues with the new TLS engine
that supports TLSv1.3 with JDK 11. This change updates our code to
use these versions since JDK 11 is a supported JDK and we should
allow the use of TLSv1.3.
This fixes#38027. Currently we assert that all shards have failed.
However, it is possible that some shards do not have segement files
created yet. The action that we block is fetching these segement files
so it is possible that some shards successfully recover.
This commit changes the assertion to ensure that at least some of the
shards have failed.
Today we pass `discovery.zen.minimum_master_nodes` to nodes started up in
tests, but for 7.x nodes this setting is not required as it has no effect.
This commit removes this setting so that nodes are started with more realistic
configurations, and deprecates it.
Types have been deprecated and this commit removes the documentation
for specifying types in the index action, and search input/transform.
Relates #37594#35190
Julie Tibshirani
Jay Modi
Tim Brooks
Benjamin Trent
Jason Tedor
Tanguy Leroux
Martijn van Groningen
Nhat Nguyen
Mark Vieira
Albert Zaharovits
Andrei Stefan
Tim Vernum
Tal Levy
Ioannis Kakavas
David Roberts
Hendrik Muhs
Martijn Laarman
Lisa Cawley
iverase
Yogesh Gaikwad
Yannick Welsch
Shaunak Kashyap
Dimitris Athanasiou
Lee Hinman
Jake Landis
Przemyslaw Gomulka
Marios Trivyzas
Alpar Torok
Alexander Reelsen
Luca Cavanna
Costin Leau
Christoph Büscher
David Turner
Zachary Tong
Boaz Leskes
Armin Braun
Brandon Kobel
Gordon Brown
Henning Andersen
Josh Soref