Currently if you run an `exists` query on an object, it will resolve all sub
fields and create a disjunction for all those fields. However the `_field_names`
mapper indexes paths for objects so we could query object paths directly.
I also changed the query parser to reject `exists` queries if the `_field_names`
field is disabled since it would be a big performance trap.
In 5.0 we don't allow index settings to be specified on the node level ie.
in yaml files or via commandline argument. This can cause problems during
upgrade if this was used extensively. For instance if analyzers where
specified on a node level this might cause the index to be closed when
imported (see #17187). In such a case all indices relying on this
must be updated via `PUT /${index}/_settings`. Yet, this API has slightly
different semantics since it overrides existing settings. To make this less
painful this change adds a `preserve_existing` parameter on that API to ensure
we have the same semantics as if the setting was applied on the node level.
This change also adds a better error message and a change to the migration guide
to ensure upgrades are smooth if index settings are specified on the node level.
If a index setting is detected this change fails the node startup and prints a message
like this:
```
*************************************************************************************
Found index level settings on node level configuration.
Since elasticsearch 5.x index level settings can NOT be set on the nodes
configuration like the elasticsearch.yaml, in system properties or command line
arguments.In order to upgrade all indices the settings must be updated via the
/${index}/_settings API. Unless all settings are dynamic all indices must be closed
in order to apply the upgradeIndices created in the future should use index templates
to set default values.
Please ensure all required values are updated on all indices by executing:
curl -XPUT 'http://localhost:9200/_all/_settings?preserve_existing=true' -d '{
"index.number_of_shards" : "1",
"index.query.default_field" : "main_field",
"index.translog.durability" : "async",
"index.ttl.disable_purge" : "true"
}'
*************************************************************************************
```
Also replaced the PercolatorQueryRegistry with the new PercolatorQueryCache.
The PercolatorFieldMapper stores the rewritten form of each percolator query's xcontext
in a binary doc values field. This make sure that the query rewrite happens only during
indexing (some queries for example fetch shapes, terms in remote indices) and
the speed up the loading of the queries in the percolator query cache.
Because the percolator now works inside the search infrastructure a number of features
(sorting fields, pagination, fetch features) are available out of the box.
The following feature requests are automatically implemented via this refactoring:
Closes#10741Closes#7297Closes#13176Closes#13978Closes#11264Closes#10741Closes#4317
Today, certain bootstrap properties are set and read via system
properties. This action-at-distance way of managing these properties is
rather confusing, and completely unnecessary. But another problem exists
with setting these as system properties. Namely, these system properties
are interpreted as Elasticsearch settings, not all of which are
registered. This leads to Elasticsearch failing to startup if any of
these special properties are set. Instead, these properties should be
kept as local as possible, and passed around as method parameters where
needed. This eliminates the action-at-distance way of handling these
properties, and eliminates the need to register these non-setting
properties. This commit does exactly that.
Additionally, today we use the "-D" command line flag to set the
properties, but this is confusing because "-D" is a special flag to the
JVM for setting system properties. This creates confusion because some
"-D" properties should be passed via arguments to the JVM (so via
ES_JAVA_OPTS), and some should be passed as arguments to
Elasticsearch. This commit changes the "-D" flag for Elasticsearch
settings to "-E".
This commit adds fields bytes_recovered and files_recovered to the cat
recovery API. These fields, respectively, indicate the total number of
bytes and files recovered. Additionally, for consistency, some totals
fields and translog recovery fields have been renamed.
Closes#17064
Enables the touching of all memory pages used by the JVM heap spaces
during initialization of the HotSpot VM, which commits all memory pages
at initialization time. By default, pages are committed only as they are
needed.
The field name is a required argument for all suggesters, but
it was specified via a field() setter in SuggestionBuilder so far.
This changes field name to being a mandatory constructor argument
and lets suggestion builders throw an error if field name is missing
or the empty string.
ba5be0332d removed support for degrading
to slf4j and j.u.l but didn't document this as a breaking change because
it is only breaking for folks using Elasticsearch's jar as a java client.
People do that so this counts as a breaking change.
Also, if anyone was brave enough to try and replace log4j on an installed
version of Elasticsearch that will no longer work and this documents that
as well. It doens't get a full heading and instead lives with the java
client notes. Mostly because I can't imagine it worked consistently enough
for anyone to actually do it in the first place. We just never tested it
well enough to make sure we didn't break it after it was implemented.
This commit adds a note to the migration docs regarding the reduction of
the Groovy dependencies from the groovy-all artifact to the groovy
artifact that was previously done in
180ab2493e.
Closes#16858
This commit removes the system property "es.useLinkedTransferQueue" that
defaulted to false and was used to control the queue implementation used
in a few places.
Closes#16786
Java NIO has the notion of gathering writes. These are writes that
gather data from multiple buffers into a single channel. These gathering
writes in Netty have been enabled by default with the possibility to
disable them using "es.netty.gathering". This flag was added in case
having gathering writes on by default did not work out. We have not
published this ability and sufficient time has passed to render
judgement that using gathering writes is okay.
Closes#16774
Elasticsearch should reject ids that are this long, to ensure a document
always remains retrievable for clients that impose a maximum URI length
Closes#16034
This commit removes the es.max-open-files flag as the same information
can be obtained from the cluster nodes info API, and is warn logged on
startup if it's set too low anyway.
Closes#16757
2.x has show so far that running with security manager is the way to go.
This commit make this non-optional. Users that need to pass their own rules
can still do this via the system configuration for the security manager. They
can even opt out of all security that way.
This commit moves IndicesRequestCache into o.e.indics and makes all API in this
class package private. All references to SearchReqeust, SearchContext etc. have been factored
out and relevant glue code has been added to IndicesService. The IndicesRequestCache is not a
simple class without any hard dependencies on ThreadPool nor SearchService or IndexShard. This now
allows to add unittests.
This commit also removes two settings `indices.requests.cache.clean_interval` and `indices.fielddata.cache.clean_interval`
in favor of `indices.cache.clean_interval` which cleans both caches.
The cat API previously used the Content-Type header field for
determining the media type of the response. This is in opposition to the
HTTP spec which specifies the Accept header field for this purpose. This
commit replaces the use of the Content-Type header field with the Accept
header field in the cat API.
Closes#14421
As a prerequisite for refactoring the whole PhraseSuggestionBuilder
to be able to be parsed and streamed from the coordinating node, the
DirectCandidateGenerator must implement Writeable, be able to parse
a new instance (fromXContent()) and later when transported to the
shard to generate a PhraseSuggestionContext.DirectCandidateGenerator.
Also adding equals/hashCode and tests and moving DirectCandidateGenerator
to its own DirectCandidateGeneratorBuilder class.
This commit limits the `index.translog.sync_interval` to a value not less than `100ms` and
removes the support for fsync on every operation which used to be enabled if `index.translog.sync_interval` was set to `0s`
Now this pr also only schedules an async fsync if the durability is set to `async`. By default not async task is scheduled.
Closes#16152
This commit converts the script mode settings to the new settings
infrastructure. This is a major refactoring of the handling of script
mode settings. This refactoring is necessary because these settings are
determined at runtime based on the registered script engines and the
registered script contexts.
Doc values can now only be enabled by setting `doc_values: true` in the
mappings. Removing this feature also means that we can now fail mapping updates
that try to disable doc values.
Doc values currently default to `true` if the field is indexed and not analyzed.
So setting `index:no` automatically disables doc values, which is not explicit
in the documentation.
This commit makes doc values default to true for numerics, booleans regardless
of whether they are indexed. Not indexed strings still don't have doc values,
since we can't know whether it is rather a text or keyword field. This
potential source of confusion should go away when we split `string` into `text`
and `keyword`.
RescoreBuilder: Add parsing and creating of RescoreSearchContext
Adding the ability to parse from xContent to the rescore builder. Also making RescoreBuilder an abstract base class that encapsulates the window_size setting, with QueryRescoreBuilder as its only implementation at the moment.
Relates to #15559
This commit modifies the default setting for standard output in the
systemd configuration to the journal instead of /dev/null. This is to
address a user pain point where Elasticsearch would fail to start but
the error message would be sent to standard output and therefore
/dev/null leading to difficult-to-debug situations.
* Cleaned up MapperService#searchFilter(...) and moved it DefaultSearchContext, since it that class was the only user. As part of the cleanup percolate query documents are no longer excluded from the search response.
* Removed resolveClosestNestedObjectMapper(...) method as it was no longer used.
* Removed DocumentTypeListener infrastructure. Before it was used by the percolator and parent/child, but these features no longer use it.
Closes#15924
* Remove remaining 1.x bwc logic.
* Stop storing stored fields and indexed terms. The _parent field's only purpose is to support joins between parent and child type and only storing doc values is sufficient.
* In the mapping the parent field mapper is now known under '{parent}#{child}' key, because this is the field the parent/child join uses too.
* Added new sub fetch phase to lookup that _parent field from doc values field if that is required (before this was fetched from stored _parent field)
* Removed the ability to query directly on `_parent` in the query dsl. Instead the `{parent}#{child}` field should be used. Under the hood a doc values query is used instead of a term query, because only doc values fields are stored now.
* Added a new `parent_id` query to easily query child documents with a specific parent id without having to know what join field to use
* Also in aggregations `_parent` field can't be used any more and `{parent}#{child}` field name should be used instead to aggregate directly on the _parent join field.
This commit modifies the load_average in the node stats API response
to be an object containing the one-minute, five-minute and
fifteen-minute load averages as fields (if those values are
available). Additionally, this commit modifies the cat nodes API
response to format the one-minute, five-minute and fifteen-minute load
averages as null if any of the respective values are not available.
The indexing buffer on a node (default: 10% of the JVM heap) is now a "shared pool" across all shards on that node. This way, shards doing intense indexing can use much more than other shards doing only light indexing, and only once the sum of all indexing buffers across all shards exceeds the node's indexing buffer will we ask shards to move recently indexed documents to segments on disk.
Warmers are now barely useful and will be removed in 3.0. Note that this only
removes the warmer API and query-based warmers. We still have warmers internally
for eg. global ordinals.
Close#15607
* Added percolator field mapper that extracts the query terms and indexes these terms with the percolator query.
* At percolate time these extracted terms are used to query percolator queries that are like to be evaluated. This can significantly cut down the time it takes to percolate. Whereas before all percolator queries were evaluated if they matches with the document being percolated.
* Changes made to percolator queries are no longer immediately visible, a refresh needs to happen before the changes are visible.
* By default the percolate api only returns upto 10 matches instead of returning all matching percolator queries.
* Made percolate more modular, so that it is easier to add unit tests.
* Added unit tests for the percolator.
Closes#12664Closes#13646
When specifying a string field, you can either do:
```
{
"foo": "bar"
}
```
or
```
{
"foo": {
"value": "bar",
"boost": 42
}
}
```
The latter option is now removed.
Closes#15388
Today we throttle recoveries only for incoming recoveries. Nodes that have a lot
of primaries can get overloaded due to too many recoveries. To still keep that at bay
we limit the number of threads that are sending files to the target to overcome this problem.
The right solution here is to also throttle the outgoing recoveries that are today unbounded on
the master and don't start the recovery until we have enough resources on both source and target nodes.
The concurrency aspects of the recovery source also added a lot of complexity and additional threadpools
that are hard to configure. This commit removes the concurrent streamns notion completely and sends files
in the thread that drives the recovery simplifying the recovery code considerably.
Outgoing recoveries are not throttled on the master via a allocation decider.
Today we have two variants of translogs for indexing. We only recommend the buffered
one which also has a 20% advantage in indexing speed. This commit removes the option and defaults
to the buffered case. It also hard-wires the translog buffer to 8kb instead of 64kb. We used to
adjust that buffer based on if the shard is active or not, this code has also been removed and
instead we just keep an 8kb buffer arround.
This option allows to force the xcontent type to use to store the `_source`
document. The default is to use the same format as the input format.
This commit makes this option ignored for 2.x indices and rejected for 3.0
indices.
As a replacement use ExistsQueryBuilder inside a mustNot() clause.
So instead of using `new ExistsQueryBuilder(name)` now use:
`new BoolQueryBuilder().mustNot(new ExistsQueryBuilder(name))`.
Closes#14112
throw exception if a copy_to is within a multi field
Copy to within multi field is ignored from 2.0 on, see #10802.
Instead of just ignoring it, we should throw an exception if this
is found in the mapping when a mapping is added. For already
existing indices we should at least log a warning.
We remove the copy_to in any case.
related to #14946
When using S3 or EC2, it was possible to use a proxy to access EC2 or S3 API but username and password were not possible to be set.
This commit adds support for this. Also, to make all that consistent, proxy settings for both plugins have been renamed:
* from `cloud.aws.proxy_host` to `cloud.aws.proxy.host`
* from `cloud.aws.ec2.proxy_host` to `cloud.aws.ec2.proxy.host`
* from `cloud.aws.s3.proxy_host` to `cloud.aws.s3.proxy.host`
* from `cloud.aws.proxy_port` to `cloud.aws.proxy.port`
* from `cloud.aws.ec2.proxy_port` to `cloud.aws.ec2.proxy.port`
* from `cloud.aws.s3.proxy_port` to `cloud.aws.s3.proxy.port`
New settings are `proxy.username` and `proxy.password`.
```yml
cloud:
aws:
protocol: https
proxy:
host: proxy1.company.com
port: 8083
username: myself
password: theBestPasswordEver!
```
You can also set different proxies for `ec2` and `s3`:
```yml
cloud:
aws:
s3:
proxy:
host: proxy1.company.com
port: 8083
username: myself1
password: theBestPasswordEver1!
ec2:
proxy:
host: proxy2.company.com
port: 8083
username: myself2
password: theBestPasswordEver2!
```
Note that `password` is filtered with `SettingsFilter`.
We also fix a potential issue in S3 repository. We were supposed to accept key/secret either set under `cloud.aws` or `cloud.aws.s3` but the actual code never implemented that.
It was:
```java
account = settings.get("cloud.aws.access_key");
key = settings.get("cloud.aws.secret_key");
```
We replaced that by:
```java
String account = settings.get(CLOUD_S3.KEY, settings.get(CLOUD_AWS.KEY));
String key = settings.get(CLOUD_S3.SECRET, settings.get(CLOUD_AWS.SECRET));
```
Also, we extract all settings for S3 in `AwsS3Service` as it's already the case for `AwsEc2Service` class.
Closes#15268.
Do not to load fields from _source when using the `fields` option.
Non stored (non existing) fields are ignored by the fields visitor when using the `fields` option.
Fixes#10783
Support * wildcard to retrieve stored fields when using the `fields` option.
Supported pattern styles are "xxx*", "*xxx", "*xxx*" and "xxx*yyy".
We actually want to keep the test when using deprecated setting in 3.0.
We will keep this setting deprecated as well so people will be able to update in a smoother way.
Also add the deprecating information to the migration documentation.
query_binary and filter_binary are unused at this point, as we only parse on the coordinating node and the java api only holds structured java objects for queries and filters, meaning they all implement Writeable and get natively serialized.
Relates to #14308Closes#14433
This commit forbids the changing of thread pool types for any thread
pool. The motivation here is that these are expert settings with
little practical advantage.
Closes#14294, relates #2509, relates #2858, relates #5152
Removes the mapping transform feature which when used made debugging very
difficult. Users should transform their documents on the way into
Elasticsearch rather than having Elasticsearch do it.
Closes#12674
We have two types of parse methods for queries: one for the inner query, to be used once the parser is positioned within the query element, and one for the whole query source, including the query element that wraps the actual query.
With the search refactoring we ended up using the former in count, cat count and delete by query, whereas we should have used the former. It ends up working properly given that we have a registered (deprecated) query called "query", which used to allow to wrap a filter into a query, but this has the following downsides:
1) prevents us from removing the deprecated "query" query
2) we end up supporting a top level query that is not wrapped within a query element (pre 1.0 syntax iirc that shouldn't be supported anymore)
This commit finally removes the "query" query and fixes the related parsing bugs. We also had some tests that were providing queries in the wrong format, those have been fixed too.
Closes#13326Closes#14304
* Allow for multiple host specifications (e.g. _en0_,192.168.1.2,_site_).
* Add _site_ and _global_ scopes as counterparts to _local_.
* Warn on heuristic selection of publish address.
* Remove the arbitrary _non_loopback_ setting.
Closes#13954
The NotQueryBuilder has been deprecated on the 2.x branches
and can be removed with the next major version. It can be
replaced by boolean query with added mustNot() clause.
Closes#13761
This adds an API for force merging lucene segments. The `/_optimize` API is now
deprecated and replaced by the `/_forcemerge` API, which has all the same flags
and action, just a different name.
This commit removes some cache concurrency level settings that were
applicable when the cache was backed by the Guava cache implementation,
but no longer apply with the cache implementation completed in #13717.
Relates #7836, relates #13224, relates #13717
The `_create` API is handy way to specify an index operation should only be done if the document doesn't exist. This is currently implemented in explicit code paths all the way down to the engine. However, conceptually this is no different than any other versioned operation - instead of requiring a document is on a specific version, we require it to be deleted (or non-existent). This PR removes Engine.Create in favor of a slight extension in the VersionType logic.
There are however a couple of side effects:
- DocumentAlreadyExistsException is removed and VersionConflictException is used instead (with an improved error message)
- Update will reject version parameters if the upsert option is used (it doesn't compute anyway).
- Translog.Create is also removed infavor of Translog.Index (that's OK because their binary format was the same, so we can just read Translog.Index of the translog file)
Closes#13955
Types are still optional, but if you do provide them, they can't be null. Split the existing constructor that accepted nnull into two, one that accepts no arguments, and another one that accepts the types argument, which must be not null.
Also trimmed down different ways of setting ids, some were misleading as they would always add the ids to the existing ones and not set them, the add prefix makes that clear. Left `addIds` method that accepts a varargs argument. Added check for ids not be null.
TermsLookupQueryBuilder was left around only for bw comp reasons, but TermsQueryBuilder is its replacement. We can remove it now that it is clear query refactoring goes in master (3.0).
This commit fixes ping timeout settings inconsistencies in
ZenDiscovery. In particular, the documentation refers to the ping
timeout setting as discovery.zen.ping_timeout but the code was
ultimately using discovery.zen.ping.timeout if this was set.
This commit also changes all instances of the raw string
“discovery.zen.ping_timeout” to the constant
o.e.d.z.ZenDiscovery.SETTING_PING_TIMEOUT.
Finally, this commit removes the legacy setting
"discovery.zen.initial_ping_timeout".
Closes#6579, #9581, #9908
The current MoreLikeThisQueryBuilder validation checks for existence of at
least one `like` text or item. This is hard to check in setters, so this PR
tries to change the construction of the query so that we can do these checks
already at construction time.
Changing to using arrays for fieldnames, likeTexts, likeItems, unlikeTexts
and unlikeItems. `likeTexts` and/or `likeItems` need to be specified at
construction time to validate we have at least one item there.
Relates to #10217
Refactor the function_score query so it can be parsed on the coordinating node, split parse into fromXContent and toQuery, make FunctionScoreQueryBuilder Writeable.
Closes#13653
Moving validation from validate() to constructors and setters for the
following query builders:
* GeoDistanceQueryBuilder
* GeoDistanceRangeQueryBuilder
* GeoPolygonQueryBuilder
* GeoShapeQueryBuilder
* GeohashCellQuery
* TermsQueryBuilder
Relates to #10217
This PR is the second batch in moving the query validation we started
to collect in the validate() method to the corresponding setters
and constructors.
Requesting a million hits, or page 100,000 is always a bad idea, but users
may not be aware of this. This adds a per-index limit on the maximum size +
from that can be requested which defaults to 10,000.
This should not interfere with deep-scrolling.
Closes#9311
* Dropped ScoreType in favour of Lucene's ScoreMode
* Removed `score_type` option from `has_child` and `has_parent` queries in favour for the already existing `score_mode` option.
* Removed the score mode `sum` in favour for the already existing `total` score mode. (`sum` doesn't exist in Lucene's ScoreMode class)
* If `max_children` is set to `0` it now really means that zero children are allowed to match.
This add equals, hashcode, read/write methods, separates toQuery and JSON parsing and adds tests.
Also moving MatchQueryBuilder.Type to MatchQuery to MatchQuery, adding serialization and hashcode,
equals there.
Relates to #10217
Previously the parser could take any Term Vectors request, but this would be
not the case of the builder which would still use MultiGetRequest.Item. This
introduces a new Item class which is used by both the builder and parser.
Beyond that the rest is mostly cleanups such as:
1) Deprecating the ignoreLike methods, in favor to using unlike.
2) Deprecating and renaming MoreLikeThisBuilder#addItem to addLikeItem.
3) Ordering the methods of MoreLikeThisBuilder more logically.
This change is needed for the upcoming query refactoring of MLT.
Closes#13372
This is an intial commit that splits HasChildQueryParser / Builder into
the two seperate steps. This one is particularly nasty since it transports
a pretty wild InnerHits object that needs heavy refactoring. Yet, this commit
has still some nocommits and needs more tests and maybe another cleanup but
it's a start to get the code out there.
detect_noop is pretty cheap and noop updates compartively expensive so this
feels like a sensible default.
Also had to do some testing and documentation around how _ttl works with
detect_noop.
Closes#11282
Until a couple of hours ago we expected the position_offset_gap to default
to 0 in 2.0 and 100 in 2.1. We decided it was worth backporting that new
default to 2.0. So now that its backported we need to teach 2.1 that 2.0
also defaults to 100.
Closes#7268
This is much more fiddly than you'd expect it to be because of the way
position_offset_gap is applied in StringFieldMapper. Instead of setting
the default to 100 its simpler to make sure that all the analyzers default
to 100 and that StringFieldMapper doesn't override the default unless the
user specifies something different. Unless the index was created before
2.1, in which case the old default of 0 has to take.
Also postition_offset_gaps less than 0 aren't allowed at all.
New tests test that:
1. the new default doesn't match phrases across values with reasonably low
slop (5)
2. the new default doest match phrases across values with reasonably high
slop (50)
3. you can override the value and phrases work as you'd expect
4. if you leave the value undefined in the mapping and define it on a
custom analyzer the the value from the custom analyzer shines through
Closes#7268
This move the `murmur3` field to the `mapper-murmur3` plugin and fixes its
defaults so that values will not be indexed by default, as the only purpose
of this field is to speed up `cardinality` aggregations on high-cardinality
string fields, which only requires doc values.
I also removed the `rehash` option from the `cardinality` aggregation as it
doesn't bring much value (rehashing is cheap) and allowed to remove the
coupling between the `cardinality` aggregation and the `murmur3` field.
Close#12874
Due to the limited abilities of parsing of dynamic (not configured) arguments
like `http.cors.enabled`, that dont map to a command line argument but will
become configuration, we need to mention explicitely, that those dynamic arguments
must come last.
Also fixed some mentions of a memory index setting, that does not exist anymore.
Closes#12758
In order to ensure, we have the same experience across operating systems
and shells, this commit uses the java CLI parser instead of the shell
getopt parsing to parse arguments.
This also allows for support for paths, which contain spaces.
Also commons-cli depdency was upgraded to 1.3.1 and tests have been added.
Changes
* new exit code, OK_AND_EXIT, allowing to tell the caller to exit, as everything
went as expected (e.g. when running a version output)
BWC breaking:
* execute() returns an ExitStatus instead of an integer, otherwise there is no
possibility to signal by a command, if the JVM should be exited after a run.
This affects plugins, that have command line tools
* -v used to be version, but is a verbose flag by default in the current CLI infra,
must be -V or --version now
* -X has been removed - the current implementation was useless anyway, as
it prefixed those properties with "es.". You should use
ES_JAVA_OPTS/JAVA_OPTS for JVM configuration
The TransportSingleCustomOperationAction `prefer_local` option has been removed as it isn't worth the effort.
The TransportSingleShardAction will execute the operation on the receiving node if a concrete list doesn't provide a list of candite shards routings to perform the operation on.
Moving the query building functionality from the parser to the builders
new toQuery() method analogous to other recent query refactorings.
Relates to #10217
Moving the query building functionality from the parser to the builders
new doToQuery() method analogous to other recent query refactorings.
Relates to #10217Closes#12365
The `_index` field is now a completely virtual field thanks
to #12027. It is no longer necessary to index the actual value
of the index name.
closes#12329
Require urls for URL repository to be listed in repositories.url.allowed_urls setting. This change ensures that only authorized URLs can be accessed by elasticsearch
Moving the query building functionality from the parser to the builders
new toQuery() method analogous to other recent query refactorings.
Relates to #10217
Plugin Manager can now use another simplified form when a user wants to install an official plugin hosted at elasticsearch download service.
The form we use is:
```sh
bin/plugin install pluginname
```
As plugins share now the same version as elasticsearch, we can automatically guess what is the exact current version of the plugin manager script.
Also, download service will now use `/org.elasticsearch.plugins/pluginName/pluginName-version.zip` URL path to download a plugin.
If the older form is provided (`user/plugin/version` or `user/plugin`), we will still use:
* elasticsearch download service at `/user/plugin/plugin-version.zip`
* maven central with groupIp=user, artifactId=plugin and version=version
* github with user=user, repoName=plugin and tag=version
* github with user=user, repoName=plugin and branch=master if no version is set
Note that community plugin providers can use other download services by using `--url` option.
If you try to use the new form with a non core elasticsearch plugin, the plugin manager will reject
it and will give you all known core plugins.
```
Usage:
-u, --url [plugin location] : Set exact URL to download the plugin from
-i, --install [plugin name] : Downloads and installs listed plugins [*]
-t, --timeout [duration] : Timeout setting: 30s, 1m, 1h... (infinite by default)
-r, --remove [plugin name] : Removes listed plugins
-l, --list : List installed plugins
-v, --verbose : Prints verbose messages
-s, --silent : Run in silent mode
-h, --help : Prints this help message
[*] Plugin name could be:
elasticsearch-plugin-name for Elasticsearch 2.0 Core plugin (download from download.elastic.co)
elasticsearch/plugin/version for elasticsearch commercial plugins (download from download.elastic.co)
groupId/artifactId/version for community plugins (download from maven central or oss sonatype)
username/repository for site plugins (download from github master)
Elasticsearch Core plugins:
- elasticsearch-analysis-icu
- elasticsearch-analysis-kuromoji
- elasticsearch-analysis-phonetic
- elasticsearch-analysis-smartcn
- elasticsearch-analysis-stempel
- elasticsearch-cloud-aws
- elasticsearch-cloud-azure
- elasticsearch-cloud-gce
- elasticsearch-delete-by-query
- elasticsearch-lang-javascript
- elasticsearch-lang-python
```
If you are using the default date or the named identifiers of dates,
the current implementation was allowed to read a year with only one
digit. In order to make this more strict, this fixes a year to be at
least 4 digits. Same applies for month, day, hour, minute, seconds.
Also the new default is `strictDateOptionalTime` for indices created
with Elasticsearch 2.0 or newer.
In addition a couple of not exposed date formats have been exposed, as they
have been mentioned in the documentation.
Closes#6158
Moving the query building functionality from the parser to the builders
new toQuery() method analogous to other recent query refactorings.
Relates to #10217
Currently parsing inner queries can return `null` which leads to unnecessary complicated
null checks further up the query hierarchy. By introducing a special EmptyQueryBuilder
that can be used to signal that this query clause should be ignored upstream where possible,
we can avoid additional null checks in parent query builders and still allow for this query
to be ignored when creating the lucene query later.
This new builder returns `null` when calling its `toQuery()` method, so at this point
we still need to handle it, but having an explicit object for the intermediate query
representation makes it easier to differentiate between cases where inner query clauses are
empty (legal) or are not set at all (illegal).
Also added check for empty inner builder list to BoolQueryBuilder and OrQueryBuilder.
Removed setters for positive/negatice query in favour of constructor with
mandatory non-null arguments in BoostingQueryBuilder.
Closes#11915
Following the discussion in #11744, move boost and query _name to base class AbstractQueryBuilder with their getters and setters. Unify their serialization code and equals/hashcode handling in the base class too. This guarantess that every query supports both _name and boost and nothing needs to be done around those in subclasses besides properly parsing the fields in the parsers and printing them out as part of the doXContent method in the builders. More specifically, these are the performed changes:
- Introduced printBoostAndQueryName utility method in AbstractQueryBuilder that subclasses can use to print out _name and boost in their doXContent method.
- readFrom and writeTo are now final methods that take care of _name and boost serialization. Subclasses have to implement doReadFrom and doWriteTo instead.
- toQuery is a final method too that takes care of properly applying _name and boost to the lucene query. Subclasses have to implement doToQuery instead. The query returned will have boost and queryName applied automatically.
- Removed BoostableQueryBuilder interface, given that every query is boostable after this change. This won't have any negative effect on filters, as the boost simply gets ignored in that case.
- Extended equals and hashcode to handle queryName and boost automatically as well.
- Update the query test infra so that queryName and boost are tested automatically, and whenever they are forgotten in parser or doXContent tests fail, so this makes things a lot less error-prone
- Introduced DEFAULT_BOOST constant to make sure we don't repeat 1.0f all the time for default boost values.
SpanQueryBuilder is again a marker interface only. The convenient toQuery that allowed us to override the return type to SpanQuery cannot be supported anymore due to a clash with the toQuery implementation from AbstractQueryBuilder. We have to go back to castin lucene Query to SpanQuery when dealing with span queries unfortunately.
Note that this change touches not only the already refactored queries but also the untouched ones, by making sure that we parse _name and boost whenever we need to and that we print them out as part of QueryBuilder#doXContent. This will result in printing out the default boost all the time rather than skipping it in non refactored queries, something that we would have changed anyway as part of the query refactoring.
The following are the queries that support boost now while previously they didn't (parser now parses it and builder prints it out): and, exists, fquery, geo_bounding_box, geo_distance, geo_distance_range, geo_hash_cell, geo_polygon, indices, limit, missing, not, or, script, type.
The following are the queries that support _name now while previously they didn't (parser now parses it and builder prints it out): boosting, constant_score, function_score, limit, match_all, type.
Range query parser supports now _name at the same level as boost too (_name is still supported on the outer object though for bw comp).
There are two exceptions that despite have getters and setters for queryName and boost don't really support boost and queryName: query filter and span multi term query. The reason for this is that they only support a single inner object which is another query that they wrap, no other elements.
Relates to #11744Closes#10776Closes#11974
In order to be backwards compatible, indices created before 2.x must support
indexing of a unix timestamp and its configured date format. Indices created
with 2.x must configure the `epoch_millis` date formatter in order to
support this.
Relates #10971
As we now have an enum Operator that comes with many useful helper methods switching to use
that instead of the enums defined separately. Also switches to using the new enum's helper
methods where applicable removing duplicate parsing logic.
This breaks backwards compatibility. Documenting the break in
migrate_query_refactoring.asciidoc
Relates to #10217
Colin Goodheart-Smithe
Adrien Grand
Simon Willnauer
Martijn van Groningen
Areek Zillur
Christoph Büscher
Jason Tedor
Clinton Gormley
Daniel Mitterdorfer
Yannick Welsch
Lee Hinman
Nicholas Knize
Andrey Ryaguzov
Nik Everett
Ali Beyad
Konstantin Delchev
David Pilato
Simon Willnauer
Jim Ferenczi
Dongjoon Hyun
Spencer
Andrej Kazakov
Yannick Welsch
Prayag Verma
Ryan Ernst
Mathias Fussenegger
Michael McCandless
Michael McCandless
Britta Weber
Jim Ferenczi
Peter Lebedev
Shaunak Kashyap
Mark Walkom
javanna
Jason O'Donnell
Robert Muir
Sarwar Bhuiyan
Andreas Kohn
Boaz Leskes
Britta Weber
Antonio Bonuccelli
Thomas Cucchietti
Alex Ksikes
xuzha
Dan Tuffery
Alexander Reelsen
Chris Earle
Chris Roche
Igor Motov
Jay Modi
jaymode
Isabel Drost-Fromm
David Pursehouse