This commit adds a note to the breaking changes docs that since commit
da74323141, thread pool settings are no
longer cluster-level settings and thus not dynamically updatable.
The search preference _prefer_node allows specifying a single node to
prefer when routing a request. This functionality can be enhanced by
permitting multiple nodes to be preferred. This commit replaces the
search preference _prefer_node with the search preference _prefer_nodes
which supplants the former by specifying a single node and otherwise
adds functionality.
Relates #18872
Previously Elasticsearch used $DATA_DIR/$CLUSTER_NAME/nodes for the path
where data is stored, this commit changes that to be $DATA_DIR/nodes.
On startup, if the old folder structure is detected it will be used.
This behavior will be removed in Elasticsearch 6.0
Resolves#17810
This commit refactors the handling of thread pool settings so that the
individual settings can be registered rather than registering the top
level group. With this refactoring, individual plugins must now register
their own settings for custom thread pools that they need, but a
dedicated API is provided for this in the thread pool module. This
commit also renames the prefix on the thread pool settings from
"threadpool" to "thread_pool". This enables a hard break on the settings
so that:
- some of the settings can be given more sensible names (e.g., the max
number of threads in a scaling thread pool is now named "max" instead
of "size")
- change the soft limit on the number of threads in the bulk and
indexing thread pools to a hard limit
- the settings names for custom plugins for thread pools can be
prefixed (e.g., "xpack.watcher.thread_pool.size")
- remove dynamic thread pool settings
Relates #18674
This adds support for setting the refresh request parameter to
`wait_for` in the `index`, `delete`, `update`, and `bulk` APIs. When
`refresh=wait_for` is set those APIs will not return until their
results have been made visible to search by a refresh.
Also it adds a `forced_refresh` field to the response of `index`,
`delete`, `update`, and to each item in a bulk response. This will
be true for requests with `?refresh` or `?refresh=true` and will be
true for some requests (see below) with `refresh=wait_for` but ought
to otherwise always be false.
`refresh=wait_for` is implemented as a list of
`Tuple<Translog.Location, Consumer<Boolean>>`s in the new `RefreshListeners`
class that is managed by `IndexShard`. The dynamic, index scoped
`index.max_refresh_listeners` setting controls a maximum number of
listeners allowed in any shard. If more than that many listeners
accumulate in the engine then a refresh will be forced, the thread that
adds the listener will be blocked until the refresh completes, and then the
listener will be called with a `forcedRefresh` flag so it knows that it was
the "straw that broke the camel's back". These listeners are only used by
`refresh=wait_for` and that flag manifests itself as `forced_refresh` being
`true` in the response.
About half of this change comes from piping async-ness down to the appropriate
layer in a way that is compatible with the ongoing with with sequence ids.
Closes#1063
You can look up the winding story of all the commits here:
https://github.com/elastic/elasticsearch/pull/17986
Here are the commit messages in case they are intersting to you:
commit 59a753b89109828d2b8f0de05cb104fc663cf95e
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Jun 6 10:18:23 2016 -0400
Replace a method reference with implementing an interface
Saves a single allocation and forces more commonality
between the WriteResults.
commit 31f7861a85b457fb7378a6f27fa0a0c171538f68
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Jun 6 10:07:55 2016 -0400
Revert "Replace static method that takes consumer with delegate class that takes an interface"
This reverts commit 777e23a6592c75db0081a53458cc760f4db69507.
commit 777e23a6592c75db0081a53458cc760f4db69507
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Jun 6 09:29:35 2016 -0400
Replace static method that takes consumer with delegate class that takes an interface
Same number of allocations, much less code duplication.
commit 9b49a480ca9587a0a16ebe941662849f38289644
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Jun 6 08:25:38 2016 -0400
Patch from boaz
commit c2bc36524fda119fd0514415127e8901d94409c8
Author: Nik Everett <nik9000@gmail.com>
Date: Thu Jun 2 14:46:27 2016 -0400
Fix docs
After updating to master we are actually testing them.
commit 03975ac056e44954eb0a371149d410dcf303e212
Author: Nik Everett <nik9000@gmail.com>
Date: Thu Jun 2 14:20:11 2016 -0400
Cleanup after merge from master
commit 9c9a1deb002c5bebb2a997c89fa12b3d7978e02e
Author: Nik Everett <nik9000@gmail.com>
Date: Thu Jun 2 14:09:14 2016 -0400
Breaking changes notes
commit 1c3e64ae06c07a85f7af80534fab88279adb30b4
Merge: 9e63ad6 f67e580
Author: Nik Everett <nik9000@gmail.com>
Date: Thu Jun 2 14:00:05 2016 -0400
Merge branch 'master' into block_until_refresh2
commit 9e63ad6de52d0b28f0b6d7203721baf1ebf6f56b
Author: Nik Everett <nik9000@gmail.com>
Date: Thu Jun 2 13:21:27 2016 -0400
Test for TransportWriteAction
commit 522ecb59d39b3c9e8df0d3b8df34b9e7aeaf0ce9
Author: Nik Everett <nik9000@gmail.com>
Date: Thu Jun 2 10:30:18 2016 -0400
Document deprecation
commit 0cd67b947f58867e704a1f0e66928a6fb5a11f11
Author: Nik Everett <nik9000@gmail.com>
Date: Thu Jun 2 10:26:23 2016 -0400
Deprecate setRefresh(boolean)
Users should use `setRefresh(RefreshPolicy)` instead.
commit aeb1be3f2c501990b33fb1f8230d496035f498ef
Author: Nik Everett <nik9000@gmail.com>
Date: Thu Jun 2 10:12:27 2016 -0400
Remove checkstyle suppression
It is fixed
commit 00d09a9caa638b6f90f4896b5502dd98d8fad56e
Author: Nik Everett <nik9000@gmail.com>
Date: Thu Jun 2 10:08:28 2016 -0400
Improve comment
commit 788164b898a6ee2878a273961230122b7386c3c9
Author: Nik Everett <nik9000@gmail.com>
Date: Thu Jun 2 10:01:01 2016 -0400
S/ReplicatedWriteResponse/WriteResponse/
Now it lines up with WriteRequest.
commit b74cf3fe778352b140355afcaa08d3d4412d749d
Author: Nik Everett <nik9000@gmail.com>
Date: Wed Jun 1 18:27:52 2016 -0400
Preserve `?refresh` behavior
`?refresh` means the same things as `?refresh=true`.
commit 30f972bdaeaaa0de6fe67746cdb8628aa86f5a8c
Author: Nik Everett <nik9000@gmail.com>
Date: Wed Jun 1 17:39:05 2016 -0400
Handle hanging documents
If a document is added to the index during a refresh we weren't properly
firing its refresh listener. This happened because the way we detect
whether a refresh makes something visible or not is imperfect. It is
ok because it always errs on the side of thinking that something isn't
yet visible.
So when a document arrives during a refresh the refresh listeners
won't think it made it into a refresh when, often, it does. The way
we work around this is by telling Elasticsearch that it ought to
trigger a refresh if there are any pending refresh listeners even
if there aren't pending documents to update. Lucene short circuits
the refresh so it doesn't take that much effort, but the refresh
listeners still get the signal that a refresh has come in and they
still pick up the change and notify the listener.
This means that the time that a listener can wait is actually slightly
longer than the refresh interval.
commit d523b5702b60c7ba309fb0dcf3cd3a4798f11960
Author: Nik Everett <nik9000@gmail.com>
Date: Wed Jun 1 14:34:01 2016 -0400
Explain Integer.MAX_VALUE
commit 4ffb7c0e954343cc1c04b3d7be2ebad66d3a016b
Author: Nik Everett <nik9000@gmail.com>
Date: Wed Jun 1 14:27:39 2016 -0400
Fire all refresh listeners in a single thread
Rather than queueing a runnable each.
commit 19606ec3bbe612095df45eba734c5b7eb2709c01
Author: Nik Everett <nik9000@gmail.com>
Date: Wed Jun 1 14:09:52 2016 -0400
Assert translog ordering
commit 6bb4e5c75e850f4a42518f06fbc955f7ec76d245
Author: Nik Everett <nik9000@gmail.com>
Date: Wed Jun 1 13:17:44 2016 -0400
Support null RefreshListeners in InternalEngine
Just skip using it.
commit 74be1480d6e44af2b354ff9ea47c234d4870b6c2
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 31 18:02:03 2016 -0400
Move funny ShardInfo hack for bulk into bulk
This should make it easier to understand because it is closer to where it
matters....
commit 2b771f8dabd488e056cfdc9989608d18264ddfb0
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 31 17:39:46 2016 -0400
Pull listener out into an inner class with javadoc and stuff
commit 058481ad72019c0492b03a7a4ac32a48673697d3
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 31 17:33:42 2016 -0400
Fix javadoc links
commit d2123b1cabf29bce8ff561d4a4c1c1d5b42bccad
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 31 17:28:09 2016 -0400
Make more stuff final
commit 8453fc4f7850f6a02fb5971c17a942a3e3fd9f7b
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 31 17:26:48 2016 -0400
Javadoc
commit fb16d2fc7016c1e8e1621d481e8781c7ef43326c
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 31 16:14:48 2016 -0400
Rewrite refresh docs
commit 5797d1b1c4d233c0db918c0d08c21731ddccd05e
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 31 15:02:34 2016 -0400
Fix forced_refresh flag
It wasn't being set.
commit 43ce50a1de250a9e073a2ca6cbf55c1b4c74b11b
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 31 14:02:56 2016 -0400
Delay translog sync and flush until after refresh
The sync might have occurred for us during the refresh so we
have less work to do. Maybe.
commit bb2739202e084703baf02cfa58f09517598cf14e
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 31 13:08:08 2016 -0400
Remove duplication in WritePrimaryResult and WriteReplicaResult
commit 2f579f89b4867a880396f2e7fcffc508449ff2de
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 31 12:19:05 2016 -0400
Clean up registration of RefreshListeners
commit 87ab6e60ca5ba945bf0fba84784b2bbe53506abf
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 31 11:28:30 2016 -0400
Shorten lock time in RefreshListeners
Also use null to represent no listeners rather than an empty list.
This saves allocating a new ArrayList every refresh cycle on every
index.
commit 0d49d9c5720dadfb67da3fa760397bf6d874601c
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 24 10:46:18 2016 -0400
Flip relationship between RefreshListeners and Engine
Now RefreshListeners comes to Engine from EngineConfig.
commit b2704b8a39382953f8f91a9743e894ee289f7514
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 24 09:37:58 2016 -0400
Remove unused imports
Maybe I added them?
commit 04343a22647f19304d9dc716b3fac9b183227f63
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 24 09:37:52 2016 -0400
Javadoc
commit da1e765678890a02d61d8a29aa433274beb5e00c
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 24 09:26:35 2016 -0400
Reply with non-null
Also move the fsync and flush to before the refresh listener stuff.
commit 5d8eecd0d904b497844b4c81c46477bd6178ed3a
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 24 08:58:47 2016 -0400
Remove funky synchronization in AsyncReplicaAction
commit 1ec71eea0f4e1228ae1497d982307be818ef4b65
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 24 08:01:14 2016 -0400
s/LinkedTransferQueue/ArrayList/
commit 7da36a4ceed2ccf7955138c3b005237fa41efcb4
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 24 07:46:38 2016 -0400
More cleanup for RefreshListeners
commit 957e9b77007c32ee75dde152c6622bab065d5993
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 24 07:34:13 2016 -0400
/Consumer<Runnable>/Executor/
commit 4d8bf5d4a70dcc56150c8d8d14165cd23d308b3c
Author: Nik Everett <nik9000@gmail.com>
Date: Mon May 23 22:20:42 2016 -0400
explain
commit 15d948a348089bb2937eec5ac4e96f3ec67dbe32
Author: Nik Everett <nik9000@gmail.com>
Date: Mon May 23 22:17:59 2016 -0400
Better....
commit dc28951d02973fc03b4d51913b5f96de14b75607
Author: Nik Everett <nik9000@gmail.com>
Date: Mon May 23 21:09:20 2016 -0400
Javadocs and compromises
commit 8eebaa89c0a1ee74982fbe0d56d1485ca2ae09db
Author: Nik Everett <nik9000@gmail.com>
Date: Mon May 23 20:52:49 2016 -0400
Take boaz's changes to their logic conclusion and unbreak important stuff like bulk
commit 7056b96ea412f275005b93e3570bcff895859ed5
Author: Nik Everett <nik9000@gmail.com>
Date: Mon May 23 15:49:32 2016 -0400
Patch from boaz
commit 87be7eaed09a274cc6a99d1a3da81d2d7bf9dd64
Author: Nik Everett <nik9000@gmail.com>
Date: Mon May 23 15:49:13 2016 -0400
Revert "Move async parts of replica operation outside of the lock"
This reverts commit 13807ad10b6f5ecd39f98c9f20874f9f352c5bc2.
commit 13807ad10b6f5ecd39f98c9f20874f9f352c5bc2
Author: Nik Everett <nik9000@gmail.com>
Date: Fri May 20 22:53:15 2016 -0400
Move async parts of replica operation outside of the lock
commit b8cadcef565908b276484f7f5f988fd58b38d8b6
Author: Nik Everett <nik9000@gmail.com>
Date: Fri May 20 16:17:20 2016 -0400
Docs
commit 91149e0580233bf79c2273b419fe9374ca746648
Author: Nik Everett <nik9000@gmail.com>
Date: Fri May 20 15:17:40 2016 -0400
Finally!
commit 1ff50c2faf56665d221f00a18d9ac88745904bf5
Author: Nik Everett <nik9000@gmail.com>
Date: Fri May 20 15:01:53 2016 -0400
Remove Translog#lastWriteLocation
I wasn't being careful enough with locks so it wasn't right anyway.
Instead this builds a synthetic Tranlog.Location when you call
getWriteLocation with much more relaxed equality guarantees. Rather
than being equal to the last Translog.Location returned it is
simply guaranteed to be greater than the last translog returned
and less than the next.
commit 55596ea68b5484490c3637fbad0d95564236478b
Author: Nik Everett <nik9000@gmail.com>
Date: Fri May 20 14:40:06 2016 -0400
Remove listener from shardOperationOnPrimary
Create instead asyncShardOperationOnPrimary which is called after
all of the replica operations are started to handle any async
operations.
commit 3322e26211bf681b37132274ee158ae330afc28b
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 17 17:20:02 2016 -0400
Increase default maximum number of listeners to 1000
commit 88171a8322a424e624d48960fb4c98dd43e4d671
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 17 16:40:57 2016 -0400
Rename test
commit 179c27c4f829f2c6ded65967652cf85adaf2ae52
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 17 16:35:27 2016 -0400
Move refresh listeners into their own class
They still live at the IndexShard level but they live on their
own in RefreshListeners which interacts with IndexShard using a
couple of callbacks and a registration method. This lets us test
the listeners without standing up an entire IndexShard. We still
test the listeners against an InternalEngine, because the interplay
between InternalEngine, Translog, and RefreshListeners is complex
and important to get right.
commit d8926d5fc1d24b4da8ccff7e0f0907b98c583c41
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 17 11:02:38 2016 -0400
Move refresh listeners into IndexShard
commit df91cde398eb720143a85a8c6fa19bdc3a74e07d
Author: Nik Everett <nik9000@gmail.com>
Date: Mon May 16 16:01:03 2016 -0400
unused import
commit 066da45b08148b266e4173166662fc1b3f66ed53
Author: Nik Everett <nik9000@gmail.com>
Date: Mon May 16 15:54:11 2016 -0400
Remove RefreshListener interface
Just pass a Translog.Location and a Consumer<Boolean> when registering.
commit b971d6d3301c7522b2e7eb90d5d8dd96a77fa625
Author: Nik Everett <nik9000@gmail.com>
Date: Mon May 16 14:41:06 2016 -0400
Docs for setForcedRefresh
commit 6c43be821eaf61141d3ec520f988aad3a96a3941
Author: Nik Everett <nik9000@gmail.com>
Date: Mon May 16 14:34:39 2016 -0400
Rename refresh setter and getter
commit e61b7391f91263a4c4d6107bfbc2a828bbcc805c
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 22:48:09 2016 -0400
Trigger listeners even when there is no refresh
Each refresh gives us an opportunity to pick up any listeners we may
have left behind.
commit 0c9b0477085c021f503db775640d25668e02f635
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 20:30:06 2016 -0400
REST
commit 8250343240de7e63118c663a230a7a314807a754
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 19:34:22 2016 -0400
Switch to estimated count
We don't need a linear time count of the number of listeners - a volatile
variable is good enough to guess. It probably undercounts more than it
overcounts but it isn't a huge problem.
commit bd531167fe54f1bde6f6d4ddb0a8de5a7bcc18a2
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 18:21:02 2016 -0400
Don't try and set forced refresh on bulk items without a response
NullPointerExceptions are bad. If the entire request fails then the user
has worse problems then "did these force a refresh".
commit bcfded11515af5e0b3c3e36f3c2f73f5cd26512e
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 18:14:20 2016 -0400
Replace LinkedList and synchronized with LinkedTransferQueue
commit 8a80cc70a76375a7593745884cb987535b37ca80
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 17:38:24 2016 -0400
Support for update
commit 1f36966742f851b7328015151ef6fc8f95299af2
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 15:46:06 2016 -0400
Cleanup translog tests
commit 8d121bf35eb265b8a0aee9710afeb1b054a113d4
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 15:40:53 2016 -0400
Cleanup listener implementation
Much more testing too!
commit 2058f4a808762c4588309f21b13b677245832f2c
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 11:45:55 2016 -0400
Pass back information about whether we refreshed
commit e445cb0cb91ebdbcfdbf566696edb2bf1c84a882
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 11:03:31 2016 -0400
Javadoc
commit 611cbeeaeb458f4b428bfc43a1ee6652adf4baff
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 11:01:40 2016 -0400
Move ReplicationResponse
now it is in the same package as its request
commit 9919758b644fd73895fb88cd6a4909a8387eb2e2
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 11:00:14 2016 -0400
Oh boy that wasn't working
commit 247cb483c4459dea8e95e0e3bd2e4bf8d452c598
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 10:29:37 2016 -0400
Basic block_until_refresh exposed to java client
and basic "is it plugged in" style tests.
commit 46c855c9971cb2b748206d2afa6a2d88724be3ba
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 10:11:10 2016 -0400
Move test to own class
commit a5ffd892d0a352ae7e9757f2640fc2a1fa656bf2
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 07:44:25 2016 -0400
WIP
commit 213bebb6ece11b85d17e44af9a54fc2e5e332d39
Author: Nik Everett <nik9000@gmail.com>
Date: Fri Apr 22 21:35:52 2016 -0400
Add refresh listeners
commit a2bc7f30e6d4857a1224ef5a89909b36c8f33731
Author: Nik Everett <nik9000@gmail.com>
Date: Fri Apr 22 21:11:55 2016 -0400
Return last written location from refresh
commit 85033a87551da89f36a23d4dfd5016db218e08ee
Author: Nik Everett <nik9000@gmail.com>
Date: Fri Apr 22 20:28:21 2016 -0400
Never reply to replica actions while you have the operation lock
This last thing was causing periodic test failures because we were
replying while we had the operation lock. Now, we probably could get
away with that in most cases but the tests don't like it and it isn't
a good idea to do network io while you have a lock anyway. So this
prevents it.
commit 1f25cf35e796835b3827b8a4110e09e5de61784c
Author: Nik Everett <nik9000@gmail.com>
Date: Fri Apr 22 19:56:18 2016 -0400
Cleanup
commit 52c5f7c3f04710901f503334239a611c0e21c85a
Author: Nik Everett <nik9000@gmail.com>
Date: Fri Apr 22 19:33:00 2016 -0400
Add a listener to shard operations
commit 5b142dc331214c8eef90587144f4b3f959f9eced
Author: Nik Everett <nik9000@gmail.com>
Date: Fri Apr 22 18:03:52 2016 -0400
Cleanup
commit 3d22b2d7ceb473db339259452a7c4f117ce86069
Author: Nik Everett <nik9000@gmail.com>
Date: Fri Apr 22 17:59:55 2016 -0400
Push the listener into shardOperationOnPrimary
commit 34b378943b8185451acf6350f661c0ad33b5836d
Author: Nik Everett <nik9000@gmail.com>
Date: Fri Apr 22 17:48:47 2016 -0400
Doc
commit b42b8da968d42cc7414020c7b199606a5dcce50a
Author: Nik Everett <nik9000@gmail.com>
Date: Fri Apr 22 17:45:40 2016 -0400
Don't finish early if the primary finishes early
We use a "fake" pending shard that we resolve when the replicas have
all started.
commit 0fc045b56e1e02a48c30383ac50a281d5af7e0b6
Author: Nik Everett <nik9000@gmail.com>
Date: Fri Apr 22 17:30:06 2016 -0400
Make performOnPrimary asyncS
Instead of returning Tuple<Response, ReplicaRequest> it returns
ReplicaRequest and takes a ActionListener<Response> as an argument.
We call the listener immediately to preserve backwards compatibility
for now.
commit 80119b9a26ede96a865af45904c3ac69d5b19b59
Author: Nik Everett <nik9000@gmail.com>
Date: Fri Apr 22 16:51:53 2016 -0400
Factor out common code in shardOperationOnPrimary
commit 0642083676702618f900fa842c08802a04c1a53e
Author: Nik Everett <nik9000@gmail.com>
Date: Fri Apr 22 16:32:29 2016 -0400
Factor out common code from shardOperationOnReplica
commit 8bdc415fedaaa9f2d0c555590a13ec4699a7c3f7
Author: Nik Everett <nik9000@gmail.com>
Date: Fri Apr 22 16:23:28 2016 -0400
Create ReplicatedMutationRequest
Superclass for index, delete, and bulkShard requests.
commit 0f8fa846a2822c4293df32fed18c9b99660b39ff
Author: Nik Everett <nik9000@gmail.com>
Date: Fri Apr 22 16:10:30 2016 -0400
Create TransportReplicatedMutationAction
It is the superclass of replication actions that mutate data: index, delete,
and shardBulk. shardFlush and shardRefresh are replication actions but they
do not extend TransportReplicatedMutationAction because they don't change
the data, only shuffle it around.
The setting bootstrap.mlockall is useful on both POSIX-like systems
(POSIX mlockall) and Windows (Win32 VirtualLock). But mlockall is really
a POSIX only thing so the name should not be tied POSIX. This commit
renames the setting to "bootstrap.memory_lock".
Relates #18669
Like on other places in the query dsl the full field name should be used.
Before this change this wasn't the case for nested inner hits when source filtering was used.
Highlighting has a workaround, which is now removed as the source of nested inner hits can only be refered by the full name.
Closes#16653
This commit removes the ability to specify a custom plugins
path. Instead, the plugins path will always be a subdirectory called
"plugins" off of the home directory.
The syntax highlighter only supports [source,js].
Also adds a check to the rest test generator that runs during
the build that'll fail the build if it sees `[source,json]`.
Significant changes:
* AbstractQueryTestCase has moved to the test framework module, in order for query builder tests in modules and plugins
* Added support to AbstractQueryTestCase to register plugins
* Lift the restriction that only one percolator could be added per index. This validation existed in MapperService, but because the percolator moved to a module it could no longer exist there. Instead of bringing it back it was removed. This validation existed since the percolator cache only supported one percolator query per document, since the percolator cache has been removed this restriction could removed as well.
* While moving percolator tests to the new module, also removed a couple of tests for the deprecated percolate and mpercolate api. These APIs are now sugar APIs for bwc and rediect to the searvh and msearvh APIs. Some tests were still testing as if percolate and mpercolate API did the percolation, but this no longer the case and these tests could be removed.
Before 5.0 for it was required that the percolator queries were cached in jvm heap as Lucene queries for two reasons:
1) Performance. The percolator evaluated all percolator queries all the time. There was no pre-selecting queries that are likely to match like we have today.
2) Updates made to percolator queries were visible in realtime, Today these changes are visible in near realtime. So updating no longer requires the percolator to have the queries in jvm heap.
So having the percolator queries in jvm heap via the percolator cache is now less attractive. Especially when there are many percolator queries then these queries can consume many GBs of jvm heap.
Removing the percolator cache does make the percolate query slower compared to how the execution time in 5.0.0-alpha1 and alpha2, but it is still faster compared to 2.x and before.
Currently the query builders expose the clauses of the span
query as a modifiable list. Instead we should make the that
getter return an unmodifiable list. Also renaming the method
used to add a clause from `clause(spanQuery)` to
`addClause(spanQuery)`.
Today when parsing settings during bootstrap, we add a system property
for every Elasticsearch setting. Additionally, settings can be set via
system properties. This commit simplifies this situation.
- settings are no longer propogated to system properties
- system properties can not be used to set settings
- the "es." prefix on settings is no longer required (nor permitted)
- test logging has a dedicated system property (tests.logger.level)
Relates #18198
* Register `indices.query.bool.max_clause_count` setting
This commit registers `indices.query.bool.max_clause_count` as a node
level setting and removes support for its synonym setting
`index.query.bool.max_clause_count`.
Closes#18336
This uses the same backoff policy we use for bulk and just retries until
the request isn't rejected.
Instead of `{"retries": 12}` in the response to count retries this now
looks like `{"retries": {"bulk": 12", "search": 1}`.
Closes#18059
This change does the following:
- Queries that are currently unsupported such as prefix queries on numeric
fields or term queries on geo fields now throw an error rather than returning
a query that does not match anything.
- Fuzzy queries on numeric, date and ip fields are now unsupported: they used
to create range queries, we now expect users to use range queries directly.
Fuzzy, regexp and prefix queries are now only supported on text/keyword
fields (including `_all`).
- The `_uid` and `_id` fields do not support prefix or range queries anymore as
it would prevent us to store them more efficiently in the future, eg. by
using a binary encoding.
Note that it is still possible to ignore these errors by using the `lenient`
option of the `match` or `query_string` queries.
Previously multiple extensions could be provided, however, this can lead
to confusion with on-disk scripts (ie, "foo.js" and "foo.javascript")
having different content. Only a single extension is now supported.
The only language currently supporting multiple extensions was the
Javascript engine ("js" and "javascript"). It now only supports the
`.js` extension.
Relates to #10598
Currently `fuzziness` is not supported for the `cross_fields` type
of the `multi_match` query since it complicates the logic that
blends the term queries that cross_fields uses internally. At the
moment using this combination is silently ignored, which can lead to
confusions. Instead we should throw an exception in this case.
The same is true for phrase and phrase_prefix type.
Closes#7764
This removes all the mentions of the sandbox from the script engine
services and permissions model. This means that the following settings
are no longer supported:
```yaml
script.inline: sandbox
script.stored: sandbox
```
Instead, only a `true` or `false` value can be specified.
Since this would otherwise break the default-allow parameter for
languages like expressions, painless, and mustache, all script engines
have been updated to have individual settings, for instance:
```yaml
script.engine.groovy.inline: true
```
Would enable all inline scripts for groovy. (they can still be
overridden on a per-operation basis).
Expressions, Painless, and Mustache all default to `true` for inline,
file, and stored scripts to preserve the old scripting behavior.
Resolves#17114
It will keep using the caching terms enum for keyword/text fields and falls back
to IndexSearcher.count for fields that do not use the inverted index for
searching (such as numbers and ip addresses). Note that this probably means that
significant terms aggregations on these fields will be less efficient than they
used to be. It should be ok under a sampler aggregation though.
This moves tests back to the state they were in before numbers started using
points, and also adds a new test that significant terms aggs fail if a field is
not indexed.
In the long term, we might want to follow the approach that Robert initially
proposed that consists in collecting all documents from the background filter in
order to compute frequencies using doc values. This would also mean that
significant terms aggregations do not require fields to be indexed anymore.
This commit adds a hard requirement to the RPM and Debian packages for
/bin/bash to be present, and adds a note regarding this to the migration
docs.
Relates #18259
The plugin script parses command-line options looking for Java system
properties and extracts these arguments to pass to the java command when
starting the JVM. Since elasticsearch-plugin allows arbitrary user
arguments to the JVM via ES_JAVA_OPTS, this parsing is unnecessary. This
commit removes this unnecessary
Relates #18207
The `ip` field uses a binary representation internally. This breaks when
rendering sort values in search responses since elasticsearch tries to write a
binary byte[] as an utf8 json string. This commit extends the `DocValueFormat`
API in order to give fields a chance to choose how to render values.
Closes#6077
QueryBuilder has generics, but those are never used: all call sites use
`QueryBuilder<?>`. Only `AbstractQueryBuilder` needs generics so that the base
class can contain a default implementation for setters that returns `this`.
Adds infrastructure so `gradle :docs:check` will extract tests from
snippets in the documentation and execute the tests. This is included
in `gradle check` so it should happen on CI and during a normal build.
By default each `// AUTOSENSE` snippet creates a unique REST test. These
tests are executed in a random order and the cluster is wiped between
each one. If multiple snippets chain together into a test you can annotate
all snippets after the first with `// TEST[continued]` to have the
generated tests for both snippets joined.
Snippets marked as `// TESTRESPONSE` are checked against the response
of the last action.
See docs/README.asciidoc for lots more.
Closes#12583. That issue is about catching bugs in the docs during build.
This catches *some* bugs in the docs during build which is a good start.
With this commit we compress HTTP responses provided the client
supports it (as indicated by the HTTP header 'Accept-Encoding').
We're also able to process compressed HTTP requests if needed.
The default compression level is lowered from 6 to 3 as benchmarks
have indicated that this reduces query latency with a negligible
increase in network traffic.
Closes#7309
Fix a limitation that prevent from hierarchical inner hits be defined in query dsl.
Removed the nested_path, parent_child_type and query options from inner hits dsl. These options are only set by ES
upon parsing the has_child, has_parent and nested queries are using their respective query builders.
These options are still used internally, when these options are set a new private copy is created based on the
provided InnerHitBuilder and configuring either nested_path or parent_child_type and the inner query of the query builder
being used.
Closes#11118
In Elasticsearch 5.0.0, by default unquoted field names in JSON will be
rejected. This can cause issues, however, for documents that were
already indexed with unquoted field names. To alleviate this, a system
property has been added that can be enabled so migration can occur.
This system property will be removed in Elasticsearch 6.0.0
Resolves#17674
* Added an extra `field` parameter to the `percolator` query to indicate what percolator field should be used. This must be an existing field in the mapping of type `percolator`.
* The `.percolator` type is now forbidden. (just like any type that starts with a `.`)
This only applies for new indices created on 5.0 and later. Indices created on previous versions the .percolator type is still allowed to exist.
The new `percolator` field type isn't active in such indices and the `PercolatorQueryCache` knows how to load queries from these legacy indices.
The `PercolatorQueryBuilder` will not enforce that the `field` parameter is of type `percolator`.
This makes all numeric fields including `date`, `ip` and `token_count` use
points instead of the inverted index as a lookup structure. This is expected
to perform worse for exact queries, but faster for range queries. It also
requires less storage.
Notes about how the change works:
- Numeric mappers have been split into a legacy version that is essentially
the current mapper, and a new version that uses points, eg.
LegacyDateFieldMapper and DateFieldMapper.
- Since new and old fields have the same names, the decision about which one
to use is made based on the index creation version.
- If you try to force using a legacy field on a new index or a field that uses
points on an old index, you will get an exception.
- IP addresses now support IPv6 via Lucene's InetAddressPoint and store them
in SORTED_SET doc values using the same encoding (fixed length of 16 bytes
and sortable).
- The internal MappedFieldType that is stored by the new mappers does not have
any of the points-related properties set. Instead, it keeps setting the index
options when parsing the `index` property of mappings and does
`if (fieldType.indexOptions() != IndexOptions.NONE) { // add point field }`
when parsing documents.
Known issues that won't fix:
- You can't use numeric fields in significant terms aggregations anymore since
this requires document frequencies, which points do not record.
- Term queries on numeric fields will now return constant scores instead of
giving better scores to the rare values.
Known issues that we could work around (in follow-up PRs, this one is too large
already):
- Range queries on `ip` addresses only work if both the lower and upper bounds
are inclusive (exclusive bounds are not exposed in Lucene). We could either
decide to implement it, or drop range support entirely and tell users to
query subnets using the CIDR notation instead.
- Since IP addresses now use a different representation for doc values,
aggregations will fail when running a terms aggregation on an ip field on a
list of indices that contains both pre-5.0 and 5.0 indices.
- The ip range aggregation does not work on the new ip field. We need to either
implement range aggs for SORTED_SET doc values or drop support for ip ranges
and tell users to use filters instead. #17700Closes#16751Closes#17007Closes#11513
This commit adds a new configuration file jvm.options to centralize and
simplify management of JVM options. This separates the configuration of
the JVM from the packaging scripts (bin/elasticsearch*, bin/service.bat,
and init.d/elasticsearch) simplifying end-user operational management of
custom JVM options.
Both top level and inline inner hits are now covered by InnerHitBuilder.
Although there are differences between top level and inline inner hits,
they now make use of the same builder logic.
The parsing of top level inner hits slightly changed to be more readable.
Before the nested path or parent/child type had to be specified as encapsuting
json object, now these settings are simple fields. Before this was required
to allow streaming parsing of inner hits without missing contextual information.
Once some issues are fixed with inline inner hits (around multi level hierachy of inner hits),
top level inner hits will be deprecated and removed in the next major version.
Today the basic node settings like `node.data` and `node.master` can't really be fully validated
since we allow to specify custom user attributes on the node level. We have to, in order to
support that, add a wildcard setting for `node.*` to let these setting pass validation.
Instead we should require a more contraint prefix like `node.attr.` that defines a namespace
that is reserved for user attributes.
This commit adds a new namespace for attributes in `node.attr`.
Closes#17280
https://github.com/elastic/elasticsearch/pull/17288 added a check to enforce that the `discovery.zen.minimum_master_nodes` configuration is set when nodes have the `host`, `port`, or `bind_host` set in either `transport` or general `network` configuration sections. This was documented incorrectly as "nodes that are bound to a non-loopback interface", which lead to confusion as I set `network.host: "localhost"` and the check was still failing.
This change updates the docs to detail the actual check. I think it also highlights how complex the check is and the need for a simpler solution.
discovery.zen.minimum_master_nodes is the single most important setting to set on a production cluster. We have no way of supplying a good default so it must be set by the user. Binding a node to a public IP (as opposed to the default local host) is a good enough indication that a node will be part of a production cluster cluster and thus it's a good tradeoff to enforce the settings. Note that nothing prevent users from setting it to 1 in a single node cluster.
Closes#17288
We currently have a `discovery.zen.master_election.filter_client` setting that control whether their ping responses are ignored for master election (which is the current default). With the push to treat client nodes as normal nodes (and promote the transport/rest clients for client work), this should be changed. This commit remove this setting and it's companion `discovery.zen.master_election.filter_data` setting (currently defaulting to false) in favor of singe `discovery.zen.master_election.ignore_non_master_pings` setting with more intuitive name (defaulting to false).
Resolves#17325Closes#17329
The available memory metric was always set to `0` since 2.0.beta1 (bug). was left behind but never set. Turns out the section wasn't that useful, as it would only output the total memory available throughout all nodes in the cluster. We decided to remove the section then.
In #17198, we removed suggest transport action, which
used the `suggest` threadpool to execute requests. Now
`suggest` threadpool is unused and suggest requests are
executed on the `search` threadpool.
Currently if you run an `exists` query on an object, it will resolve all sub
fields and create a disjunction for all those fields. However the `_field_names`
mapper indexes paths for objects so we could query object paths directly.
I also changed the query parser to reject `exists` queries if the `_field_names`
field is disabled since it would be a big performance trap.
In 5.0 we don't allow index settings to be specified on the node level ie.
in yaml files or via commandline argument. This can cause problems during
upgrade if this was used extensively. For instance if analyzers where
specified on a node level this might cause the index to be closed when
imported (see #17187). In such a case all indices relying on this
must be updated via `PUT /${index}/_settings`. Yet, this API has slightly
different semantics since it overrides existing settings. To make this less
painful this change adds a `preserve_existing` parameter on that API to ensure
we have the same semantics as if the setting was applied on the node level.
This change also adds a better error message and a change to the migration guide
to ensure upgrades are smooth if index settings are specified on the node level.
If a index setting is detected this change fails the node startup and prints a message
like this:
```
*************************************************************************************
Found index level settings on node level configuration.
Since elasticsearch 5.x index level settings can NOT be set on the nodes
configuration like the elasticsearch.yaml, in system properties or command line
arguments.In order to upgrade all indices the settings must be updated via the
/${index}/_settings API. Unless all settings are dynamic all indices must be closed
in order to apply the upgradeIndices created in the future should use index templates
to set default values.
Please ensure all required values are updated on all indices by executing:
curl -XPUT 'http://localhost:9200/_all/_settings?preserve_existing=true' -d '{
"index.number_of_shards" : "1",
"index.query.default_field" : "main_field",
"index.translog.durability" : "async",
"index.ttl.disable_purge" : "true"
}'
*************************************************************************************
```
Also replaced the PercolatorQueryRegistry with the new PercolatorQueryCache.
The PercolatorFieldMapper stores the rewritten form of each percolator query's xcontext
in a binary doc values field. This make sure that the query rewrite happens only during
indexing (some queries for example fetch shapes, terms in remote indices) and
the speed up the loading of the queries in the percolator query cache.
Because the percolator now works inside the search infrastructure a number of features
(sorting fields, pagination, fetch features) are available out of the box.
The following feature requests are automatically implemented via this refactoring:
Closes#10741Closes#7297Closes#13176Closes#13978Closes#11264Closes#10741Closes#4317
Today, certain bootstrap properties are set and read via system
properties. This action-at-distance way of managing these properties is
rather confusing, and completely unnecessary. But another problem exists
with setting these as system properties. Namely, these system properties
are interpreted as Elasticsearch settings, not all of which are
registered. This leads to Elasticsearch failing to startup if any of
these special properties are set. Instead, these properties should be
kept as local as possible, and passed around as method parameters where
needed. This eliminates the action-at-distance way of handling these
properties, and eliminates the need to register these non-setting
properties. This commit does exactly that.
Additionally, today we use the "-D" command line flag to set the
properties, but this is confusing because "-D" is a special flag to the
JVM for setting system properties. This creates confusion because some
"-D" properties should be passed via arguments to the JVM (so via
ES_JAVA_OPTS), and some should be passed as arguments to
Elasticsearch. This commit changes the "-D" flag for Elasticsearch
settings to "-E".
This commit adds fields bytes_recovered and files_recovered to the cat
recovery API. These fields, respectively, indicate the total number of
bytes and files recovered. Additionally, for consistency, some totals
fields and translog recovery fields have been renamed.
Closes#17064
Enables the touching of all memory pages used by the JVM heap spaces
during initialization of the HotSpot VM, which commits all memory pages
at initialization time. By default, pages are committed only as they are
needed.
The field name is a required argument for all suggesters, but
it was specified via a field() setter in SuggestionBuilder so far.
This changes field name to being a mandatory constructor argument
and lets suggestion builders throw an error if field name is missing
or the empty string.
ba5be0332d removed support for degrading
to slf4j and j.u.l but didn't document this as a breaking change because
it is only breaking for folks using Elasticsearch's jar as a java client.
People do that so this counts as a breaking change.
Also, if anyone was brave enough to try and replace log4j on an installed
version of Elasticsearch that will no longer work and this documents that
as well. It doens't get a full heading and instead lives with the java
client notes. Mostly because I can't imagine it worked consistently enough
for anyone to actually do it in the first place. We just never tested it
well enough to make sure we didn't break it after it was implemented.
This commit adds a note to the migration docs regarding the reduction of
the Groovy dependencies from the groovy-all artifact to the groovy
artifact that was previously done in
180ab2493e.
Closes#16858
This commit removes the system property "es.useLinkedTransferQueue" that
defaulted to false and was used to control the queue implementation used
in a few places.
Closes#16786
Java NIO has the notion of gathering writes. These are writes that
gather data from multiple buffers into a single channel. These gathering
writes in Netty have been enabled by default with the possibility to
disable them using "es.netty.gathering". This flag was added in case
having gathering writes on by default did not work out. We have not
published this ability and sufficient time has passed to render
judgement that using gathering writes is okay.
Closes#16774
Elasticsearch should reject ids that are this long, to ensure a document
always remains retrievable for clients that impose a maximum URI length
Closes#16034
This commit removes the es.max-open-files flag as the same information
can be obtained from the cluster nodes info API, and is warn logged on
startup if it's set too low anyway.
Closes#16757
2.x has show so far that running with security manager is the way to go.
This commit make this non-optional. Users that need to pass their own rules
can still do this via the system configuration for the security manager. They
can even opt out of all security that way.
This commit moves IndicesRequestCache into o.e.indics and makes all API in this
class package private. All references to SearchReqeust, SearchContext etc. have been factored
out and relevant glue code has been added to IndicesService. The IndicesRequestCache is not a
simple class without any hard dependencies on ThreadPool nor SearchService or IndexShard. This now
allows to add unittests.
This commit also removes two settings `indices.requests.cache.clean_interval` and `indices.fielddata.cache.clean_interval`
in favor of `indices.cache.clean_interval` which cleans both caches.
The cat API previously used the Content-Type header field for
determining the media type of the response. This is in opposition to the
HTTP spec which specifies the Accept header field for this purpose. This
commit replaces the use of the Content-Type header field with the Accept
header field in the cat API.
Closes#14421
As a prerequisite for refactoring the whole PhraseSuggestionBuilder
to be able to be parsed and streamed from the coordinating node, the
DirectCandidateGenerator must implement Writeable, be able to parse
a new instance (fromXContent()) and later when transported to the
shard to generate a PhraseSuggestionContext.DirectCandidateGenerator.
Also adding equals/hashCode and tests and moving DirectCandidateGenerator
to its own DirectCandidateGeneratorBuilder class.
This commit limits the `index.translog.sync_interval` to a value not less than `100ms` and
removes the support for fsync on every operation which used to be enabled if `index.translog.sync_interval` was set to `0s`
Now this pr also only schedules an async fsync if the durability is set to `async`. By default not async task is scheduled.
Closes#16152
This commit converts the script mode settings to the new settings
infrastructure. This is a major refactoring of the handling of script
mode settings. This refactoring is necessary because these settings are
determined at runtime based on the registered script engines and the
registered script contexts.
Doc values can now only be enabled by setting `doc_values: true` in the
mappings. Removing this feature also means that we can now fail mapping updates
that try to disable doc values.
Doc values currently default to `true` if the field is indexed and not analyzed.
So setting `index:no` automatically disables doc values, which is not explicit
in the documentation.
This commit makes doc values default to true for numerics, booleans regardless
of whether they are indexed. Not indexed strings still don't have doc values,
since we can't know whether it is rather a text or keyword field. This
potential source of confusion should go away when we split `string` into `text`
and `keyword`.
RescoreBuilder: Add parsing and creating of RescoreSearchContext
Adding the ability to parse from xContent to the rescore builder. Also making RescoreBuilder an abstract base class that encapsulates the window_size setting, with QueryRescoreBuilder as its only implementation at the moment.
Relates to #15559
This commit modifies the default setting for standard output in the
systemd configuration to the journal instead of /dev/null. This is to
address a user pain point where Elasticsearch would fail to start but
the error message would be sent to standard output and therefore
/dev/null leading to difficult-to-debug situations.
* Cleaned up MapperService#searchFilter(...) and moved it DefaultSearchContext, since it that class was the only user. As part of the cleanup percolate query documents are no longer excluded from the search response.
* Removed resolveClosestNestedObjectMapper(...) method as it was no longer used.
* Removed DocumentTypeListener infrastructure. Before it was used by the percolator and parent/child, but these features no longer use it.
Closes#15924
* Remove remaining 1.x bwc logic.
* Stop storing stored fields and indexed terms. The _parent field's only purpose is to support joins between parent and child type and only storing doc values is sufficient.
* In the mapping the parent field mapper is now known under '{parent}#{child}' key, because this is the field the parent/child join uses too.
* Added new sub fetch phase to lookup that _parent field from doc values field if that is required (before this was fetched from stored _parent field)
* Removed the ability to query directly on `_parent` in the query dsl. Instead the `{parent}#{child}` field should be used. Under the hood a doc values query is used instead of a term query, because only doc values fields are stored now.
* Added a new `parent_id` query to easily query child documents with a specific parent id without having to know what join field to use
* Also in aggregations `_parent` field can't be used any more and `{parent}#{child}` field name should be used instead to aggregate directly on the _parent join field.
This commit modifies the load_average in the node stats API response
to be an object containing the one-minute, five-minute and
fifteen-minute load averages as fields (if those values are
available). Additionally, this commit modifies the cat nodes API
response to format the one-minute, five-minute and fifteen-minute load
averages as null if any of the respective values are not available.
The indexing buffer on a node (default: 10% of the JVM heap) is now a "shared pool" across all shards on that node. This way, shards doing intense indexing can use much more than other shards doing only light indexing, and only once the sum of all indexing buffers across all shards exceeds the node's indexing buffer will we ask shards to move recently indexed documents to segments on disk.
Warmers are now barely useful and will be removed in 3.0. Note that this only
removes the warmer API and query-based warmers. We still have warmers internally
for eg. global ordinals.
Close#15607
* Added percolator field mapper that extracts the query terms and indexes these terms with the percolator query.
* At percolate time these extracted terms are used to query percolator queries that are like to be evaluated. This can significantly cut down the time it takes to percolate. Whereas before all percolator queries were evaluated if they matches with the document being percolated.
* Changes made to percolator queries are no longer immediately visible, a refresh needs to happen before the changes are visible.
* By default the percolate api only returns upto 10 matches instead of returning all matching percolator queries.
* Made percolate more modular, so that it is easier to add unit tests.
* Added unit tests for the percolator.
Closes#12664Closes#13646
When specifying a string field, you can either do:
```
{
"foo": "bar"
}
```
or
```
{
"foo": {
"value": "bar",
"boost": 42
}
}
```
The latter option is now removed.
Closes#15388
Today we throttle recoveries only for incoming recoveries. Nodes that have a lot
of primaries can get overloaded due to too many recoveries. To still keep that at bay
we limit the number of threads that are sending files to the target to overcome this problem.
The right solution here is to also throttle the outgoing recoveries that are today unbounded on
the master and don't start the recovery until we have enough resources on both source and target nodes.
The concurrency aspects of the recovery source also added a lot of complexity and additional threadpools
that are hard to configure. This commit removes the concurrent streamns notion completely and sends files
in the thread that drives the recovery simplifying the recovery code considerably.
Outgoing recoveries are not throttled on the master via a allocation decider.
Today we have two variants of translogs for indexing. We only recommend the buffered
one which also has a 20% advantage in indexing speed. This commit removes the option and defaults
to the buffered case. It also hard-wires the translog buffer to 8kb instead of 64kb. We used to
adjust that buffer based on if the shard is active or not, this code has also been removed and
instead we just keep an 8kb buffer arround.
This option allows to force the xcontent type to use to store the `_source`
document. The default is to use the same format as the input format.
This commit makes this option ignored for 2.x indices and rejected for 3.0
indices.
As a replacement use ExistsQueryBuilder inside a mustNot() clause.
So instead of using `new ExistsQueryBuilder(name)` now use:
`new BoolQueryBuilder().mustNot(new ExistsQueryBuilder(name))`.
Closes#14112
throw exception if a copy_to is within a multi field
Copy to within multi field is ignored from 2.0 on, see #10802.
Instead of just ignoring it, we should throw an exception if this
is found in the mapping when a mapping is added. For already
existing indices we should at least log a warning.
We remove the copy_to in any case.
related to #14946
When using S3 or EC2, it was possible to use a proxy to access EC2 or S3 API but username and password were not possible to be set.
This commit adds support for this. Also, to make all that consistent, proxy settings for both plugins have been renamed:
* from `cloud.aws.proxy_host` to `cloud.aws.proxy.host`
* from `cloud.aws.ec2.proxy_host` to `cloud.aws.ec2.proxy.host`
* from `cloud.aws.s3.proxy_host` to `cloud.aws.s3.proxy.host`
* from `cloud.aws.proxy_port` to `cloud.aws.proxy.port`
* from `cloud.aws.ec2.proxy_port` to `cloud.aws.ec2.proxy.port`
* from `cloud.aws.s3.proxy_port` to `cloud.aws.s3.proxy.port`
New settings are `proxy.username` and `proxy.password`.
```yml
cloud:
aws:
protocol: https
proxy:
host: proxy1.company.com
port: 8083
username: myself
password: theBestPasswordEver!
```
You can also set different proxies for `ec2` and `s3`:
```yml
cloud:
aws:
s3:
proxy:
host: proxy1.company.com
port: 8083
username: myself1
password: theBestPasswordEver1!
ec2:
proxy:
host: proxy2.company.com
port: 8083
username: myself2
password: theBestPasswordEver2!
```
Note that `password` is filtered with `SettingsFilter`.
We also fix a potential issue in S3 repository. We were supposed to accept key/secret either set under `cloud.aws` or `cloud.aws.s3` but the actual code never implemented that.
It was:
```java
account = settings.get("cloud.aws.access_key");
key = settings.get("cloud.aws.secret_key");
```
We replaced that by:
```java
String account = settings.get(CLOUD_S3.KEY, settings.get(CLOUD_AWS.KEY));
String key = settings.get(CLOUD_S3.SECRET, settings.get(CLOUD_AWS.SECRET));
```
Also, we extract all settings for S3 in `AwsS3Service` as it's already the case for `AwsEc2Service` class.
Closes#15268.
Do not to load fields from _source when using the `fields` option.
Non stored (non existing) fields are ignored by the fields visitor when using the `fields` option.
Fixes#10783
Support * wildcard to retrieve stored fields when using the `fields` option.
Supported pattern styles are "xxx*", "*xxx", "*xxx*" and "xxx*yyy".
We actually want to keep the test when using deprecated setting in 3.0.
We will keep this setting deprecated as well so people will be able to update in a smoother way.
Also add the deprecating information to the migration documentation.
query_binary and filter_binary are unused at this point, as we only parse on the coordinating node and the java api only holds structured java objects for queries and filters, meaning they all implement Writeable and get natively serialized.
Relates to #14308Closes#14433
This commit forbids the changing of thread pool types for any thread
pool. The motivation here is that these are expert settings with
little practical advantage.
Closes#14294, relates #2509, relates #2858, relates #5152
Removes the mapping transform feature which when used made debugging very
difficult. Users should transform their documents on the way into
Elasticsearch rather than having Elasticsearch do it.
Closes#12674
We have two types of parse methods for queries: one for the inner query, to be used once the parser is positioned within the query element, and one for the whole query source, including the query element that wraps the actual query.
With the search refactoring we ended up using the former in count, cat count and delete by query, whereas we should have used the former. It ends up working properly given that we have a registered (deprecated) query called "query", which used to allow to wrap a filter into a query, but this has the following downsides:
1) prevents us from removing the deprecated "query" query
2) we end up supporting a top level query that is not wrapped within a query element (pre 1.0 syntax iirc that shouldn't be supported anymore)
This commit finally removes the "query" query and fixes the related parsing bugs. We also had some tests that were providing queries in the wrong format, those have been fixed too.
Closes#13326Closes#14304
* Allow for multiple host specifications (e.g. _en0_,192.168.1.2,_site_).
* Add _site_ and _global_ scopes as counterparts to _local_.
* Warn on heuristic selection of publish address.
* Remove the arbitrary _non_loopback_ setting.
Closes#13954
The NotQueryBuilder has been deprecated on the 2.x branches
and can be removed with the next major version. It can be
replaced by boolean query with added mustNot() clause.
Closes#13761
This adds an API for force merging lucene segments. The `/_optimize` API is now
deprecated and replaced by the `/_forcemerge` API, which has all the same flags
and action, just a different name.
This commit removes some cache concurrency level settings that were
applicable when the cache was backed by the Guava cache implementation,
but no longer apply with the cache implementation completed in #13717.
Relates #7836, relates #13224, relates #13717
The `_create` API is handy way to specify an index operation should only be done if the document doesn't exist. This is currently implemented in explicit code paths all the way down to the engine. However, conceptually this is no different than any other versioned operation - instead of requiring a document is on a specific version, we require it to be deleted (or non-existent). This PR removes Engine.Create in favor of a slight extension in the VersionType logic.
There are however a couple of side effects:
- DocumentAlreadyExistsException is removed and VersionConflictException is used instead (with an improved error message)
- Update will reject version parameters if the upsert option is used (it doesn't compute anyway).
- Translog.Create is also removed infavor of Translog.Index (that's OK because their binary format was the same, so we can just read Translog.Index of the translog file)
Closes#13955
Types are still optional, but if you do provide them, they can't be null. Split the existing constructor that accepted nnull into two, one that accepts no arguments, and another one that accepts the types argument, which must be not null.
Also trimmed down different ways of setting ids, some were misleading as they would always add the ids to the existing ones and not set them, the add prefix makes that clear. Left `addIds` method that accepts a varargs argument. Added check for ids not be null.
TermsLookupQueryBuilder was left around only for bw comp reasons, but TermsQueryBuilder is its replacement. We can remove it now that it is clear query refactoring goes in master (3.0).
This commit fixes ping timeout settings inconsistencies in
ZenDiscovery. In particular, the documentation refers to the ping
timeout setting as discovery.zen.ping_timeout but the code was
ultimately using discovery.zen.ping.timeout if this was set.
This commit also changes all instances of the raw string
“discovery.zen.ping_timeout” to the constant
o.e.d.z.ZenDiscovery.SETTING_PING_TIMEOUT.
Finally, this commit removes the legacy setting
"discovery.zen.initial_ping_timeout".
Closes#6579, #9581, #9908
The current MoreLikeThisQueryBuilder validation checks for existence of at
least one `like` text or item. This is hard to check in setters, so this PR
tries to change the construction of the query so that we can do these checks
already at construction time.
Changing to using arrays for fieldnames, likeTexts, likeItems, unlikeTexts
and unlikeItems. `likeTexts` and/or `likeItems` need to be specified at
construction time to validate we have at least one item there.
Relates to #10217
Refactor the function_score query so it can be parsed on the coordinating node, split parse into fromXContent and toQuery, make FunctionScoreQueryBuilder Writeable.
Closes#13653
Moving validation from validate() to constructors and setters for the
following query builders:
* GeoDistanceQueryBuilder
* GeoDistanceRangeQueryBuilder
* GeoPolygonQueryBuilder
* GeoShapeQueryBuilder
* GeohashCellQuery
* TermsQueryBuilder
Relates to #10217
This PR is the second batch in moving the query validation we started
to collect in the validate() method to the corresponding setters
and constructors.
Requesting a million hits, or page 100,000 is always a bad idea, but users
may not be aware of this. This adds a per-index limit on the maximum size +
from that can be requested which defaults to 10,000.
This should not interfere with deep-scrolling.
Closes#9311
* Dropped ScoreType in favour of Lucene's ScoreMode
* Removed `score_type` option from `has_child` and `has_parent` queries in favour for the already existing `score_mode` option.
* Removed the score mode `sum` in favour for the already existing `total` score mode. (`sum` doesn't exist in Lucene's ScoreMode class)
* If `max_children` is set to `0` it now really means that zero children are allowed to match.
This add equals, hashcode, read/write methods, separates toQuery and JSON parsing and adds tests.
Also moving MatchQueryBuilder.Type to MatchQuery to MatchQuery, adding serialization and hashcode,
equals there.
Relates to #10217
Jason Tedor
Jim Ferenczi
Colin Goodheart-Smithe
Nik Everett
Lee Hinman
Martijn van Groningen
Tanguy Leroux
Christoph Büscher
Simon Willnauer
polyfractal
Adrien Grand
Alexander Kazakov
Clinton Gormley
Isabel Drost-Fromm
Daniel Mitterdorfer
Areek Zillur
Martijn Laarman
Pius
Lee Hinman
Russ Cam
Jun Ohtani
Jimmy Jones
Simon Willnauer
Isabel Drost-Fromm
javanna
spalger
Boaz Leskes
Yannick Welsch
Nicholas Knize
Andrey Ryaguzov
Ali Beyad
Konstantin Delchev
David Pilato
Dongjoon Hyun
Andrej Kazakov
Yannick Welsch
Prayag Verma
Ryan Ernst
Mathias Fussenegger
Michael McCandless
Michael McCandless
Britta Weber
Jim Ferenczi
Peter Lebedev
Shaunak Kashyap
Mark Walkom
Jason O'Donnell
Robert Muir
Sarwar Bhuiyan
Andreas Kohn
Britta Weber
Antonio Bonuccelli
Thomas Cucchietti
Alex Ksikes