The ILM policy for the source and shrunk indices run separately (ie. they
are two separate managed indices). This fixes the test which exhibited some
flakiness by allowing some time for the ILM policy for the source index
to finish executing.
(cherry picked from commit c78d5e8499fc5ca2ca1314f97bcc6b55ba06e2e7)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
Enables fully concurrent snapshot operations:
* Snapshot create- and delete operations can be started in any order
* Delete operations wait for snapshot finalization to finish, are batched as much as possible to improve efficiency and once enqueued in the cluster state prevent new snapshots from starting on data nodes until executed
* We could be even more concurrent here in a follow-up by interleaving deletes and snapshots on a per-shard level. I decided not to do this for now since it seemed not worth the added complexity yet. Due to batching+deduplicating of deletes the pain of having a delete stuck behind a long -running snapshot seemed manageable (dropped client connections + resulting retries don't cause issues due to deduplication of delete jobs, batching of deletes allows enqueuing more and more deletes even if a snapshot blocks for a long time that will all be executed in essentially constant time (due to bulk snapshot deletion, deleting multiple snapshots is mostly about as fast as deleting a single one))
* Snapshot creation is completely concurrent across shards, but per shard snapshots are linearized for each repository as are snapshot finalizations
See updated JavaDoc and added test cases for more details and illustration on the functionality.
Some notes:
The queuing of snapshot finalizations and deletes and the related locking/synchronization is a little awkward in this version but can be much simplified with some refactoring. The problem is that snapshot finalizations resolve their listeners on the `SNAPSHOT` pool while deletes resolve the listener on the master update thread. With some refactoring both of these could be moved to the master update thread, effectively removing the need for any synchronization around the `SnapshotService` state. I didn't do this refactoring here because it's a fairly large change and not necessary for the functionality but plan to do so in a follow-up.
This change allows for completely removing any trickery around synchronizing deletes and snapshots from SLM and 100% does away with SLM errors from collisions between deletes and snapshots.
Snapshotting a single index in parallel to a long running full backup will execute without having to wait for the long running backup as required by the ILM/SLM use case of moving indices to "snapshot tier". Finalizations are linearized but ordered according to which snapshot saw all of its shards complete first
There is no point in writing out snapshots that contain no data that can be restored
whatsoever. It may have made sense to do so in the past when there was an `INIT` snapshot
step that wrote data to the repository that would've other become unreferenced, but in the
current day state machine without the `INIT` step there is no point in doing so.
This makes the data_stream timestamp field specification optional when
defining a composable template.
When there isn't one specified it will default to `@timestamp`.
(cherry picked from commit 5609353c5d164e15a636c22019c9c17fa98aac30)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
This adds a low precendece mapping for the `@timestamp` field with
type `date`.
This will aid with the bootstrapping of data streams as a timestamp
mapping can be omitted when nanos precision is not needed.
(cherry picked from commit 4e72f43d62edfe52a934367ce9809b5efbcdb531)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
Waiting `INIT` here is dead code in newer versions that don't use `INIT`
any longer and leads to nothing being written to the repository in older versions
if the snapshot is cancelled at the `INIT` step which then breaks repo consistency
checks.
Since we have other tests ensuring that snapshot abort works properly we can just remove
the wait for `INIT` here and backport this down to 7.8 to fix tests.
relates #59140
* GET data stream API returns additional information (#59128)
This adds the data stream's index template, the configured ILM policy
(if any) and the health status of the data stream to the GET _data_stream
response.
Restoring a data stream from a snapshot could install a data stream that
doesn't match any composable templates. This also makes the `template`
field in the `GET _data_stream` response optional.
(cherry picked from commit 0d9c98a82353b088c782b6a04c44844e66137054)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
Fixed an issue #59082 introduced. We have to wait for no more operations
in all tests here not just the one we were waiting in already so that the cleanup
operation from the parent class can run without failure.
For #58994 it would be useful to be able to share test infrastructure.
This PR shares `AbstractSnapshotIntegTestCase` for that purpose, dries up SLM tests
accordingly and adds a shared and efficient (compared to the previous implementations)
way of waiting for no running snapshot operations to the test infrastructure to dry things up further.
This commit creates a new Gradle plugin to provide a separate task name
and source set for running YAML based REST tests. The only project
converted to use the new plugin in this PR is distribution/archives/integ-test-zip.
For which the testing has been moved to :rest-api-spec since it makes the most
sense and it avoids a small but awkward change to the distribution plugin.
The remaining cases in modules, plugins, and x-pack will be handled in followups.
This plugin is distinctly different from the plugin introduced in #55896 since
the YAML REST tests are intended to be black box tests over HTTP. As such they
should not (by default) have access to the classpath for that which they are testing.
The YAML based REST tests will be moved to separate source sets (yamlRestTest).
The which source is the target for the test resources is dependent on if this
new plugin is applied. If it is not applied, it will default to the test source
set.
Further, this introduces a breaking change for plugin developers that
use the YAML testing framework. They will now need to either use the new source set
and matching task, or configure the rest resources to use the old "test" source set that
matches the old integTest task. (The former should be preferred).
As part of this change (which is also breaking for plugin developers) the
rest resources plugin has been removed from the build plugin and now requires
either explicit application or application via the new YAML REST test plugin.
Plugin developers should be able to fix the breaking changes to the YAML tests
by adding apply plugin: 'elasticsearch.yaml-rest-test' and moving the YAML tests
under a yamlRestTest folder (instead of test)
Backport of #58582 to 7.x branch.
This commit adds a new metadata field mapper that validates,
that a document has exactly a single timestamp value in the data stream timestamp field and
that the timestamp field mapping only has `type`, `meta` or `format` attributes configured.
Other attributes can affect the guarantee that an index with this meta field mapper has a
useable timestamp field.
The MetadataCreateIndexService inserts a data stream timestamp field mapper whenever
a new backing index of a data stream is created.
Relates to #53100
* Replace compile configuration usage with api (#58451)
- Use java-library instead of plugin to allow api configuration usage
- Remove explicit references to runtime configurations in dependency declarations
- Make test runtime classpath input for testing convention
- required as java library will by default not have build jar file
- jar file is now explicit input of the task and gradle will ensure its properly build
* Fix compile usages in 7.x branch
Today we have individual settings for configuring node roles such as
node.data and node.master. Additionally, roles are pluggable and we have
used this to introduce roles such as node.ml and node.voting_only. As
the number of roles is growing, managing these becomes harder for the
user. For example, to create a master-only node, today a user has to
configure:
- node.data: false
- node.ingest: false
- node.remote_cluster_client: false
- node.ml: false
at a minimum if they are relying on defaults, but also add:
- node.master: true
- node.transform: false
- node.voting_only: false
If they want to be explicit. This is also challenging in cases where a
user wants to have configure a coordinating-only node which requires
disabling all roles, a list which we are adding to, requiring the user
to keep checking whether a node has acquired any of these roles.
This commit addresses this by adding a list setting node.roles for which
a user has explicit control over the list of roles that a node has. If
the setting is configured, the node has exactly the roles in the list,
and not any additional roles. This means to configure a master-only
node, the setting is merely 'node.roles: [master]', and to configure a
coordinating-only node, the setting is merely: 'node.roles: []'.
With this change we deprecate the existing 'node.*' settings such as
'node.data'.
Add the ability to get a custom value while specifying a default and use it throughout the
codebase to get rid of the `null` edge case and shorten the code a little.
* Add support for snapshot and restore to data streams (#57675)
This change adds support for including data streams in snapshots.
Names are provided in indices field (the same way as in other APIs), wildcards are supported.
If rename pattern is specified it renames both data streams and backing indices.
It also adds test to make sure SLM works correctly.
Closes#57127
Relates to #53100
* version fix
* compilation fix
* compilation fix
* remove unused changes
* compilation fix
* test fix
This changes the actions that would attempt to make the managed index read only to
check if the managed index is the write index of a data stream before proceeding.
The updated actions are shrink, readonly, freeze and forcemerge.
(cherry picked from commit c906f631833fee8628f898917a8613a1f436c6b1)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
We don't allow converting a data stream's writeable index into a searchable
snapshot. We are currently preventing swapping a data stream's write index
with the restored index.
This adds another step that will not proceed with the searchable snapshot action
until the managed index is not the write index of a data stream anymore.
(cherry picked from commit ccd618ead7cf7f5a74b9fb34524d00024de1479a)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
* Remove usage of deprecated testCompile configuration
* Replace testCompile usage by testImplementation
* Make testImplementation non transitive by default (as we did for testCompile)
* Update CONTRIBUTING about using testImplementation for test dependencies
* Fail on testCompile configuration usage
The shrink action creates a shrunken index with the target number of shards.
This makes the shrink action data stream aware. If the ILM managed index is
part of a data stream the shrink action will make sure to swap the original
managed index with the shrunken one as part of the data stream's backing
indices and then delete the original index.
(cherry picked from commit 99aeed6acf4ae7cbdd97a3bcfe54c5d37ab7a574)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
In #55592 and #55416, we deprecated the settings for enabling and disabling
basic license features and turned those settings into no-ops. Since doing so,
we've had feedback that this change may not give users enough time to cleanly
switch from non-ILM index management tools to ILM. If two index managers
operate simultaneously, results could be strange and difficult to
reconstruct. We don't know of any cases where SLM will cause a problem, but we
are restoring that setting as well, to be on the safe side.
This PR is not a strict commit reversion. First, we are keeping the new
xpack.watcher.use_ilm_index_management setting, introduced when
xpack.ilm.enabled was made a no-op, so that users can begin migrating to using
it. Second, the SLM setting was modified in the same commit as a group of other
settings, so I have taken just the changes relating to SLM.
As the datastream information is stored in the `ClusterState.Metadata` we exposed
the `Metadata` to the `AsyncWaitStep#evaluateCondition` method in order for
the steps to be able to identify when a managed index is part of a DataStream.
If a managed index is part of a DataStream the rollover target is the DataStream
name and the highest generation index is the write index (ie. the rolled index).
(cherry picked from commit 6b410dfb78f3676fce1b7401f1628c1ca6fbd45a)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
Backport of #56878 to 7.x branch.
With this change the following APIs will be able to resolve data streams:
get index, get mappings and ilm explain APIs.
Relates to #53100
Without the flag we run into the situation where a broken repository (broken by some old 6.x
version of ES that is missing some snap-${uuid}.dat blobs fails to run the SLM retention task
since it always errors out).
The following settings are now no-ops:
* xpack.flattened.enabled
* xpack.logstash.enabled
* xpack.rollup.enabled
* xpack.slm.enabled
* xpack.sql.enabled
* xpack.transform.enabled
* xpack.vectors.enabled
Since these settings no longer need to be checked, we can remove settings
parameters from a number of constructors and methods, and do so in this
commit.
We also update documentation to remove references to these settings.
* Allow Deleting Multiple Snapshots at Once (#55474)
Adds deleting multiple snapshots in one go without significantly changing the mechanics of snapshot deletes otherwise.
This change does not yet allow mixing snapshot delete and abort. Abort is still only allowed for a single snapshot delete by exact name.
* Make xpack.monitoring.enabled setting a no-op
This commit turns xpack.monitoring.enabled into a no-op. Mostly, this involved
removing the setting from the setup for integration tests. Monitoring may
introduce some complexity for test setup and teardown, so we should keep an eye
out for turbulence and failures
* Docs for making deprecated setting a no-op
This commit converts the remaining isXXXAllowed methods to instead of
use isAllowed with a Feature value. There are a couple other methods
that are static, as well as some licensed features that check the
license directly, but those will be dealt with in other followups.
* Make xpack.ilm.enabled setting a no-op
* Add watcher setting to not use ILM
* Update documentation for no-op setting
* Remove NO_ILM ml index templates
* Remove unneeded setting from test setup
* Inline variable definitions for ML templates
* Use identical parameter names in templates
* New ILM/watcher setting falls back to old setting
* Add fallback unit test for watcher/ilm setting
We believe there's no longer a need to be able to disable basic-license
features completely using the "xpack.*.enabled" settings. If users don't
want to use those features, they simply don't need to use them. Having
such features always available lets us build more complex features that
assume basic-license features are present.
This commit deprecates settings of the form "xpack.*.enabled" for
basic-license features, excluding "security", which is a special case.
It also removes deprecated settings from integration tests and unit
tests where they're not directly relevant; e.g. monitoring and ILM are
no longer disabled in many integration tests.
Backport from: #54726
The INCLUDE_DATA_STREAMS indices option controls whether data streams can be resolved in an api for both concrete names and wildcard expressions. If data streams cannot be resolved then a 400 error is returned indicating that data streams cannot be used.
In this pr, the INCLUDE_DATA_STREAMS indices option is enabled in the following APIs: search, msearch, refresh, index (op_type create only) and bulk (index requests with op type create only). In a subsequent later change, we will determine which other APIs need to be able to resolve data streams and enable the INCLUDE_DATA_STREAMS indices option for these APIs.
Whether an api resolve all backing indices of a data stream or the latest index of a data stream (write index) depends on the IndexNameExpressionResolver.Context.isResolveToWriteIndex().
If isResolveToWriteIndex() returns true then data streams resolve to the latest index (for example: index api) and otherwise a data stream resolves to all backing indices of a data stream (for example: search api).
Relates to #53100
When retrieving the snapshots for a set of repos or deleting a single snapshot, it's possible for
the body of the `ActionListener`'s `onResponse` method to throw an Exception. In this case, the
`errHandler` passed in may not be executed, resulting in the `running` boolean not being reset back
to false.
This commit uses `ActionListener.wrap(...)` instead of creating a new ActionListener, which ensures
that if the `onResponse` fails in any way, the `onFailure` handler is still called.
Resolves#55217
Today we pass the `RepositoriesService` to the searchable snapshots plugin
during the initialization of the `RepositoryModule`, forcing the plugin to be a
`RepositoryPlugin` even though it does not implement any repositories.
After discussion we decided it best for now to pass this in via
`Plugin#createComponents` instead, pending some future work in which plugins
can depend on services more dynamically.
Prior to the change in #51631 indices were moved to the `TerminalPolicyStep` when their ILM actions
had completed. Once we switched ILM to stop in the last policy configured, these steps because
inaccessible from the policy's perspective. This meant that indices upgraded from ES prior to 7.7.0
could see the following error spammed in their logs every 10 minutes (by default) for every index in
this state:
```
[2020-04-14T15:52:23,764][ERROR][o.e.x.i.IndexLifecycleRunner] [midgar] current step [{"phase":"completed","action":"completed","name":"completed"}] for index [foo] with policy [full] is not recognized
```
This changes the runner to ignore these steps, which is what is desired anyway since the index is
already in the terminal phase.
This commits adds a timeout when moving ILM back on to a failed step. In
case the master is struggling with processing the cluster update requests
these ones will expire (as we'll send them again anyway on the next ILM
loop run)
ILM more descriptive source messages for cluster updates
Use the configured ILM step master timeout setting
(cherry picked from commit ff6c5ed16616eadfcddd9c95317d370f0d126583)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
* ILM use Priority.IMMEDIATE for stop ILM cluster update (#54909)
This changes the priority of the cluster state update that stops ILM
altogether to `IMMEDIATE`. We've chosen to change this as it can be useful to
temporarily stop ILM if a cluster is overwhelmed, but a `NORMAL`
priority can see the "stop ILM update" not make it up the tasks queue.
On the same note, we're keeping the `start ILM` cluster update priority
to `NORMAL` on purpose such that we only start `ILM` if the cluster can
handle it.
(cherry picked from commit d67df3a7cd2a8619c2c9efac4dde3ba83271f2fa)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
Asserting on the failed_step field from the explainAPI can produce flakiness
because the ILM state is moved back and forth between the (failing) step and
the ERROR step (as the workflow is retry, fail then move to ERROR step,
move back to the (failing) step, retry, fail, etc) and the failed_step
information is only available whilst in the ERROR state.
Unmute other tests as they were collateral failures
A read-only index could not be deleted in the wipeCluster phase and caused
these failures
(cherry picked from commit 99a6d57aeb3cf11abc38b514f38a96bb1612e357)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
This is a backport of #54803 for 7.x.
This pull request cherry picks the squashed commit from #54803 with the additional commits:
6f50c92 which adjusts master code to 7.x
a114549 to mute a failing ILM test (#54818)
48cbca1 and 50186b2 that cleans up and fixes the previous test
aae12bb that adds a missing feature flag (#54861)
6f330e3 that adds missing serialization bits (#54864)
bf72c02 that adjust the version in YAML tests
a51955f that adds some plumbing for the transport client used in integration tests
Co-authored-by: David Turner <david.turner@elastic.co>
Co-authored-by: Yannick Welsch <yannick@welsch.lu>
Co-authored-by: Lee Hinman <dakrone@users.noreply.github.com>
Co-authored-by: Andrei Dan <andrei.dan@elastic.co>
This is a follow up to a previous commit that renamed MetaData to
Metadata in all of the places. In that commit in master, we renamed
META_DATA to METADATA, but lost this on the backport. This commit
addresses that.
This is a simple naming change PR, to fix the fact that "metadata" is a
single English word, and for too long we have not followed general
naming conventions for it. We are also not consistent about it, for
example, METADATA instead of META_DATA if we were trying to be
consistent with MetaData (although METADATA is correct when considered
in the context of "metadata"). This was a simple find and replace across
the code base, only taking a few minutes to fix this naming issue
forever.
Andrei Dan
Armin Braun
Jake Landis
Martijn van Groningen
Lee Hinman
Dan Hermann
Rene Groeschke
Jason Tedor
Przemko Robakowski
Benjamin Trent
William Brafford
William Brafford
Ryan Ernst
David Turner
Dimitrios Liappis
Tanguy Leroux