This commit creates a new Gradle plugin to provide a separate task name
and source set for running YAML based REST tests. The only project
converted to use the new plugin in this PR is distribution/archives/integ-test-zip.
For which the testing has been moved to :rest-api-spec since it makes the most
sense and it avoids a small but awkward change to the distribution plugin.
The remaining cases in modules, plugins, and x-pack will be handled in followups.
This plugin is distinctly different from the plugin introduced in #55896 since
the YAML REST tests are intended to be black box tests over HTTP. As such they
should not (by default) have access to the classpath for that which they are testing.
The YAML based REST tests will be moved to separate source sets (yamlRestTest).
The which source is the target for the test resources is dependent on if this
new plugin is applied. If it is not applied, it will default to the test source
set.
Further, this introduces a breaking change for plugin developers that
use the YAML testing framework. They will now need to either use the new source set
and matching task, or configure the rest resources to use the old "test" source set that
matches the old integTest task. (The former should be preferred).
As part of this change (which is also breaking for plugin developers) the
rest resources plugin has been removed from the build plugin and now requires
either explicit application or application via the new YAML REST test plugin.
Plugin developers should be able to fix the breaking changes to the YAML tests
by adding apply plugin: 'elasticsearch.yaml-rest-test' and moving the YAML tests
under a yamlRestTest folder (instead of test)
* Replace compile configuration usage with api (#58451)
- Use java-library instead of plugin to allow api configuration usage
- Remove explicit references to runtime configurations in dependency declarations
- Make test runtime classpath input for testing convention
- required as java library will by default not have build jar file
- jar file is now explicit input of the task and gradle will ensure its properly build
* Fix compile usages in 7.x branch
Today when creating a follower index via the put follow API, or via an
auto-follow pattern, it is not possible to specify settings overrides
for the follower index. Instead, we copy all of the leader index
settings to the follower. Yet, there are cases where a user would want
some different settings on the follower index such as the number of
replicas, or allocation settings. This commit addresses this by allowing
the user to specify settings overrides when creating follower index via
manual put follower calls, or via auto-follow patterns. Note that not
all settings can be overrode (e.g., index.number_of_shards) so we also
have detection that prevents attempting to override settings that must
be equal between the leader and follow index. Note that we do not even
allow specifying such settings in the overrides, even if they are
specified to be equal between the leader and the follower
index. Instead, the must be implicitly copied from the leader index, not
explicitly set by the user.
* Remove usage of deprecated testCompile configuration
* Replace testCompile usage by testImplementation
* Make testImplementation non transitive by default (as we did for testCompile)
* Update CONTRIBUTING about using testImplementation for test dependencies
* Fail on testCompile configuration usage
Our FIPS 140 testing depends on setting the appropriate java policy
in order to configure the JVM in FIPS mode. Some tests (
discovery-ec2 and ccr qa ) also needed to set a custom policy file
to grant a specific permission, which overwrote the FIPS related
policy and tests would fail. This change ensures that when a
custom policy needs to be set in these tests, the permissions that
are necessary for FIPS are also set.
Resolves: #51685, #52034
This commit removes some code duplication in the CCR non-compliance
tests by refactoring an assertion method so that it can be used in both
tests that are present there.
We believe there's no longer a need to be able to disable basic-license
features completely using the "xpack.*.enabled" settings. If users don't
want to use those features, they simply don't need to use them. Having
such features always available lets us build more complex features that
assume basic-license features are present.
This commit deprecates settings of the form "xpack.*.enabled" for
basic-license features, excluding "security", which is a special case.
It also removes deprecated settings from integration tests and unit
tests where they're not directly relevant; e.g. monitoring and ILM are
no longer disabled in many integration tests.
* Smarter copying of the rest specs and tests (#52114)
This PR addresses the unnecessary copying of the rest specs and allows
for better semantics for which specs and tests are copied. By default
the rest specs will get copied if the project applies
`elasticsearch.standalone-rest-test` or `esplugin` and the project
has rest tests or you configure the custom extension `restResources`.
This PR also removes the need for dozens of places where the x-pack
specs were copied by supporting copying of the x-pack rest specs too.
The plugin/task introduced here can also copy the rest tests to the
local project through a similar configuration.
The new plugin/task allows a user to minimize the surface area of
which rest specs are copied. Per project can be configured to include
only a subset of the specs (or tests). Configuring a project to only
copy the specs when actually needed should help with build cache hit
rates since we can better define what is actually in use.
However, project level optimizations for build cache hit rates are
not included with this PR.
Also, with this PR you can no longer use the includePackaged flag on
integTest task.
The following items are included in this PR:
* new plugin: `elasticsearch.rest-resources`
* new tasks: CopyRestApiTask and CopyRestTestsTask - performs the copy
* new extension 'restResources'
```
restResources {
restApi {
includeCore 'foo' , 'bar' //will include the core specs that start with foo and bar
includeXpack 'baz' //will include x-pack specs that start with baz
}
restTests {
includeCore 'foo', 'bar' //will include the core tests that start with foo and bar
includeXpack 'baz' //will include the x-pack tests that start with baz
}
}
```
The shard follow task cleaner executes on behalf of the user to clean up
a shard follow task after the follower index has been
deleted. Otherwise, these persistent tasks are left laying around, and
they fail to execute because the follower index has been deleted. In the
face of security, attempts to complete these persistent tasks would
fail. This is because these cleanups are executed under the system
context (this makes sense, they are happening on behalf of the user
after the user has executed an action) but the system role was never
granted the permission for persistent task completion. This commit
addresses this by adding this cluster privilege to the system role.
Today we do not use retention leases in peer recovery for closed indices
because we can't sync retention leases on closed indices. This change
allows that ability and adjusts peer recovery to use retention leases
for all indices with soft-deletes enabled.
Relates #45136
Co-authored-by: David Turner <david.turner@elastic.co>
Backport of #48849. Update `.editorconfig` to make the Java settings the
default for all files, and then apply a 2-space indent to all `*.gradle`
files. Then reformat all the files.
This commit adds two APIs that allow to pause and resume
CCR auto-follower patterns:
// pause auto-follower
POST /_ccr/auto_follow/my_pattern/pause
// resume auto-follower
POST /_ccr/auto_follow/my_pattern/resume
The ability to pause and resume auto-follow patterns can be
useful in some situations, including the rolling upgrades of
cluster using a bi-directional cross-cluster replication scheme
(see #46665).
This commit adds a new active flag to the AutoFollowPattern
and adapts the AutoCoordinator and AutoFollower classes so
that it stops to fetch remote's cluster state when all auto-follow
patterns associate to the remote cluster are paused.
When an auto-follower is paused, remote indices that match the
pattern are just ignored: they are not added to the pattern's
followed indices uids list that is maintained in the local cluster
state. This way, when the auto-follow pattern is resumed the
indices created in the remote cluster in the meantime will be
picked up again and added as new following indices. Indices
created and then deleted in the remote cluster will be ignored
as they won't be seen at all by the auto-follower pattern at
resume time.
Backport of #47510 for 7.x
* Restrict which tasks can use testclusters
This PR fixes a problem between the interaction of test-clusters and
build cache.
Before this any task could have used a cluster without tracking it as
input.
With this change a new interface is introduced to track the tasks that
can use clusters and we do consider the cluster as input for all of
them.
Today we recover a replica by copying operations from the primary's translog.
However we also retain some historical operations in the index itself, as long
as soft-deletes are enabled. This commit adjusts peer recovery to use the
operations in the index for recovery rather than those in the translog, and
ensures that the replication group retains enough history for use in peer
recovery by means of retention leases.
Reverts #38904 and #42211
Relates #41536
Backport of #45136 to 7.x.
Test clusters currently has its own set of logic for dealing with
finding different versions of Elasticsearch, downloading them, and
extracting them. This commit converts testclusters to use the
DistributionDownloadPlugin.
This commit adds functionality so that aliases that are manipulated on
leader indices are replicated by the shard follow tasks to the follower
indices. Note that we ignore write indices. This is due to the fact that
follower indices do not receive direct writes so the concept is not
useful.
Relates #41815
* Replace usages RandomizedTestingTask with built-in Gradle Test (#40978)
This commit replaces the existing RandomizedTestingTask and supporting code with Gradle's built-in JUnit support via the Test task type. Additionally, the previous workaround to disable all tasks named "test" and create new unit testing tasks named "unitTest" has been removed such that the "test" task now runs unit tests as per the normal Gradle Java plugin conventions.
(cherry picked from commit 323f312bbc829a63056a79ebe45adced5099f6e6)
* Fix forking JVM runner
* Don't bump shadow plugin version
This named writable was never registered, so it means that we could not
read auto-follow patterns that were registered in the cluster
state. This causes them to be lost on restarts, a bad bug. This commit
addresses this by registering this named writable, and we add a basic
CCR restart test to ensure that CCR keeps functioning properly when the
follower is restarted.
This commit introduces the forget follower API. This API is needed in cases that
unfollowing a following index fails to remove the shard history retention leases
on the leader index. This can happen explicitly through user action, or
implicitly through an index managed by ILM. When this occurs, history will be
retained longer than necessary. While the retention lease will eventually
expire, it can be expensive to allow history to persist for that long, and also
prevent ILM from performing actions like shrink on the leader index. As such, we
introduce an API to allow for manual removal of the shard history retention
leases in this case.
The CCR REST tests that rely on these assertions are flaky. They are
flaky since the introduction of recovery from the remote.
The underlying problem is this: these tests are making assertions about
the number of operations read by the shard following task. However, with
recovery from remote, we no longer have guarantees that the assumptions
these tests were relying on hold. Namely, these tests were assuming that
the only way that a document could land in the follower index is via the
shard following task. With recovery from remote, there is another way,
which is via the files that are copied over during the recovery
phase. Most of the time this will not be a problem because with the
small number of documents that we are indexing in these tests, it is
usally not the case that a flush would occur and so there would not be
any documents in the files copied over. However, a flush can occur any
time at which point all of the indexed documents could end up in a safe
commit and copied over during recovery from remote. This commit modifies
these assertions to ones that are not prone to this issue, yet still
validate the health of the follower shard.
This PR removes the temporary change we made to the yml test harness in #37285
to automatically set `include_type_name` to `true` in index creation requests
if it's not already specified. This is possible now that the vast majority of
index creation requests were updated to be typeless in #37611. A few additional
tests also needed updating here.
Additionally, this PR updates the test harness to set `include_type_name` to
`false` in index creation requests when communicating with 6.x nodes. This
mirrors the logic added in #37611 to allow for typeless document write requests
in test set-up code. With this update in place, we can remove many references
to `include_type_name: false` from the yml tests.
This commit modifies the put follow index action to use a
CcrRepository when creating a follower index. It routes
the logic through the snapshot/restore process. A
wait_for_active_shards parameter can be used to configure
how long to wait before returning the response.
In order to support JSON log format, a custom pattern layout was used and its configuration is enclosed in ESJsonLayout. Users are free to use their own patterns, but if smooth Beats integration is needed, they should use ESJsonLayout. EvilLoggerTests are left intact to make sure user's custom log patterns work fine.
To populate additional fields node.id and cluster.uuid which are not available at start time,
a cluster state update will have to be received and the values passed to log4j pattern converter.
A ClusterStateObserver.Listener is used to receive only one ClusteStateUpdate. Once update is received the nodeId and clusterUUid are set in a static field in a NodeAndClusterIdConverter.
Following fields are expected in JSON log lines: type, tiemstamp, level, component, cluster.name, node.name, node.id, cluster.uuid, message, stacktrace
see ESJsonLayout.java for more details and field descriptions
Docker log4j2 configuration is now almost the same as the one use for ES binary.
The only difference is that docker is using console appenders, whereas ES is using file appenders.
relates: #32850
The integ tests currently use the raw zip project name as the
distribution type. This commit simplifies this specification to be
"default" or "oss". Whether zip or tar is used should be an internal
implementation detail of the integ test setup, which can (in the future)
be platform specific.
* Add ccr follow info api
This api returns all follower indices and per follower index
the provided parameters at put follow / resume follow time and
whether index following is paused or active.
Closes#37127
* iter
* [DOCS] Edits the get follower info API
* [DOCS] Fixes link to remote cluster
* [DOCS] Clarifies descriptions for configured parameters
* Default include_type_name to false for get and put mappings.
* Default include_type_name to false for get field mappings.
* Add a constant for the default include_type_name value.
* Default include_type_name to false for get and put index templates.
* Default include_type_name to false for create index.
* Update create index calls in REST documentation to use include_type_name=true.
* Some minor clean-ups around the get index API.
* In REST tests, use include_type_name=true by default for index creation.
* Make sure to use 'expression == false'.
* Clarify the different IndexTemplateMetaData toXContent methods.
* Fix FullClusterRestartIT#testSnapshotRestore.
* Fix the ml_anomalies_default_mappings test.
* Fix GetFieldMappingsResponseTests and GetIndexTemplateResponseTests.
We make sure to specify include_type_name=true during xContent parsing,
so we continue to test the legacy typed responses. XContent generation
for the typeless responses is currently only covered by REST tests,
but we will be adding unit test coverage for these as we implement
each typeless API in the Java HLRC.
This commit also refactors GetMappingsResponse to follow the same appraoch
as the other mappings-related responses, where we read include_type_name
out of the xContent params, instead of creating a second toXContent method.
This gives better consistency in the response parsing code.
* Fix more REST tests.
* Improve some wording in the create index documentation.
* Add a note about types removal in the create index docs.
* Fix SmokeTestMonitoringWithSecurityIT#testHTTPExporterWithSSL.
* Make sure to mention include_type_name in the REST docs for affected APIs.
* Make sure to use 'expression == false' in FullClusterRestartIT.
* Mention include_type_name in the REST templates docs.
Fail with a 403 when indexing a document directly into a follower index.
In order to test this change, I had to move specific assertions into a dedicated class and
disable assertions for that class in the rest qa module. I think that is the right trade off.
In Lucene 8 searches can skip non-competitive hits if the total hit count is not requested.
It is also possible to track the number of hits up to a certain threshold. This is a trade off to speed up searches while still being able to know a lower bound of the total hit count. This change adds the ability to set this threshold directly in the track_total_hits search option. A boolean value (true, false) indicates whether the total hit count should be tracked in the response. When set as an integer this option allows to compute a lower bound of the total hits while preserving the ability to skip non-competitive hits when enough matches have been collected.
Relates #33028
Renamed the follow qa modules:
`multi-cluster-downgraded-to-basic-license` to `downgraded-to-basic-license`
`multi-cluster-with-non-compliant-license` to `non-compliant-license`
`multi-cluster-with-security` to `security`
Moved the `chain` module into the `multi-cluster` module and
changed the `multi-cluster` to start 3 clusters.
Followup from #36031
This commit changes the format of the `hits.total` in the search response to be an object with
a `value` and a `relation`. The `value` indicates the number of hits that match the query and the
`relation` indicates whether the number is accurate (in which case the relation is equals to `eq`)
or a lower bound of the total (in which case it is equals to `gte`).
This change also adds a parameter called `rest_total_hits_as_int` that can be used in the
search APIs to opt out from this change (retrieve the total hits as a number in the rest response).
Note that currently all search responses are accurate (`track_total_hits: true`) or they don't contain
`hits.total` (`track_total_hits: true`). We'll add a way to get a lower bound of the total hits in a
follow up (to allow numbers to be passed to `track_total_hits`).
Relates #33028
and replaced poll interval setting with a hardcoded poll interval.
The hard coded interval will be removed in a follow up change to make
use of cluster state API's wait_for_metatdata_version.
Before the auto following was bootstrapped from thread pool scheduler,
but now auto followers for new remote clusters are bootstrapped when
a new cluster state is published.
Originates from #35895
Relates to #33007
The current response format is:
```
{
"pattern1": {
...
},
"pattern2": {
...
}
}
```
The new format is:
```
{
"patterns": [
{
"name": "pattern1",
"pattern": {
...
}
},
{
"name": "pattern2",
"pattern": {
...
}
}
]
}
```
This format is more structured and more friendly for parsing and generating specs.
This is a breaking change, but it is better to do this now while ccr
is still a beta feature than later.
Follow up from #36049
avoid the assertions that check the log files, because that does not work on Windows.
The rest of the test is still useful and should work on Windows CI.
Currently on Windows CI this qa module fails because there is just one test and
that test si ignored if OS is Windows.
Validate remote cluster license as part of put auto follow pattern api call
in addition of validation that when auto follow coordinator starts auto
following indices in the leader cluster.
Also added qa module that tests what happens to ccr after downgrading to basic license.
Existing active follow indices should remain to follow,
but the auto follow feature should not pickup new leader indices.
Jake Landis
Rene Groeschke
Jason Tedor
Ioannis Kakavas
William Brafford
Nhat Nguyen
Yannick Welsch
Rory Hunter
Tanguy Leroux
Alpar Torok
David Turner
Ryan Ernst
Mark Vieira
Martijn van Groningen
Tal Levy
Julie Tibshirani
Tim Brooks
Przemyslaw Gomulka
Ryan Ernst
Jim Ferenczi