Backport from: #54726
The INCLUDE_DATA_STREAMS indices option controls whether data streams can be resolved in an api for both concrete names and wildcard expressions. If data streams cannot be resolved then a 400 error is returned indicating that data streams cannot be used.
In this pr, the INCLUDE_DATA_STREAMS indices option is enabled in the following APIs: search, msearch, refresh, index (op_type create only) and bulk (index requests with op type create only). In a subsequent later change, we will determine which other APIs need to be able to resolve data streams and enable the INCLUDE_DATA_STREAMS indices option for these APIs.
Whether an api resolve all backing indices of a data stream or the latest index of a data stream (write index) depends on the IndexNameExpressionResolver.Context.isResolveToWriteIndex().
If isResolveToWriteIndex() returns true then data streams resolve to the latest index (for example: index api) and otherwise a data stream resolves to all backing indices of a data stream (for example: search api).
Relates to #53100
The pom files for our published artifacts are sent to maven central
during Elastic's release process, but we may not found out until then
that we have inadvertently broken the pom structure, as has happened
several times before. This commit adds validation of the pom file
specifically for the rules required by maven central.
* Add ValuesSource Registry and associated logic (#54281)
* Remove ValuesSourceType argument to ValuesSourceAggregationBuilder (#48638)
* ValuesSourceRegistry Prototype (#48758)
* Remove generics from ValuesSource related classes (#49606)
* fix percentile aggregation tests (#50712)
* Basic thread safety for ValuesSourceRegistry (#50340)
* Remove target value type from ValuesSourceAggregationBuilder (#49943)
* Cleanup default values source type (#50992)
* CoreValuesSourceType no longer implements Writable (#51276)
* Remove genereics & hard coded ValuesSource references from Matrix Stats (#51131)
* Put values source types on fields (#51503)
* Remove VST Any (#51539)
* Rewire terms agg to use new VS registry (#51182)
Also adds some basic AggTestCases for untested code
paths (and boilerplate for future tests once the IT are
converted over)
* Wire Cardinality aggregation to work with the ValuesSourceRegistry (#51337)
* Wire Percentiles aggregator into new VS framework (#51639)
This required a bit of a refactor to percentiles itself. Before,
the Builder would switch on the chosen algo to generate an
algo-specific factory. This doesn't work (or at least, would be
difficult) in the new VS framework.
This refactor consolidates both factories together and introduces
a PercentilesConfig object to act as a standardized way to pass
algo-specific parameters through the factory. This object
is then used when deciding which kind of aggregator to create
Note: CoreValuesSourceType.HISTOGRAM still lives in core, and will
be moved in a subsequent PR.
* Remove generics and target value type from MultiVSAB (#51647)
* fix checkstyle after merge (#52008)
* Plumb ValuesSourceRegistry through to QuerySearchContext (#51710)
* Convert RareTerms to new VS registry (#52166)
* Wire up Value Count (#52225)
* Wire up Max & Min aggregations (#52219)
* ValuesSource refactoring: Wire up Sum aggregation (#52571)
* ValuesSource refactoring: Wire up SigTerms aggregation (#52590)
* Soft immutability for VSConfig (#52729)
* Unmute testSupportedFieldTypes, fix Percentiles/Ranks/Terms tests (#52734)
Also fixes Percentiles which was incorrectly specified to only accept
numeric, but in fact also accepts Boolean and Date (because those are
numeric on master - thanks `testSupportedFieldTypes` for catching it!)
* VS refactoring: Wire up stats aggregation (#52891)
* ValuesSource refactoring: Wire up string_stats aggregation (#52875)
* VS refactoring: Wire up median (MAD) aggregation (#52945)
* fix valuesourcetype issue with constant_keyword field (#53041)x-pack/plugin/rollup/src/main/java/org/elasticsearch/xpack/rollup/job/RollupIndexer.java
this commit implements `getValuesSourceType` for
the ConstantKeyword field type.
master was merged into feature/extensible-values-source
introducing a new field type that was not implementing
`getValuesSourceType`.
* ValuesSource refactoring: Wire up Avg aggregation (#52752)
* Wire PercentileRanks aggregator into new VS framework (#51693)
* Add a VSConfig resolver for aggregations not using the registry (#53038)
* Vs refactor wire up ranges and date ranges (#52918)
* Wire up geo_bounds aggregation to ValuesSourceRegistry (#53034)
This commit updates the geo_bounds aggregation to depend
on registering itself in the ValuesSourceRegistry
relates #42949.
* VS refactoring: convert Boxplot to new registry (#53132)
* Wire-up geotile_grid and geohash_grid to ValuesSourceRegistry (#53037)
This commit updates the geo*_grid aggregations to depend
on registering itself in the ValuesSourceRegistry
relates to the values-source refactoring meta issue #42949.
* Wire-up geo_centroid agg to ValuesSourceRegistry (#53040)
This commit updates the geo_centroid aggregation to depend
on registering itself in the ValuesSourceRegistry.
relates to the values-source refactoring meta issue #42949.
* Fix type tests for Missing aggregation (#53501)
* ValuesSource Refactor: move histo VSType into XPack module (#53298)
- Introduces a new API (`getBareAggregatorRegistrar()`) which allows plugins to register aggregations against existing agg definitions defined in Core.
- This moves the histogram VSType over to XPack where it belongs. `getHistogramValues()` still remains as a Core concept
- Moves the histo-specific bits over to xpack (e.g. the actual aggregator logic). This requires extra boilerplate since we need to create a new "Analytics" Percentile/Rank aggregators to deal with the histo field. Doubly-so since percentiles/ranks are extra boiler-plate'y... should be much lighter for other aggs
* Wire up DateHistogram to the ValuesSourceRegistry (#53484)
* Vs refactor parser cleanup (#53198)
Co-authored-by: Zachary Tong <polyfractal@elastic.co>
Co-authored-by: Zachary Tong <zach@elastic.co>
Co-authored-by: Christos Soulios <1561376+csoulios@users.noreply.github.com>
Co-authored-by: Tal Levy <JubBoy333@gmail.com>
* First batch of easy fixes
* Remove List.of from ValuesSourceRegistry
Note that we intend to have a follow up PR dealing with the mutability
of the registry, so I didn't even try to address that here.
* More compiler fixes
* More compiler fixes
* More compiler fixes
* Precommit is happy and so am I
* Add new Core VSTs to tests
* Disabled supported type test on SigTerms until we can backport it's fix
* fix checkstyle
* Fix test failure from semantic merge issue
* Fix some metaData->metadata replacements that got lost
* Fix list of supported types for MinAggregator
* Fix list of supported types for Avg
* remove unused import
Co-authored-by: Zachary Tong <polyfractal@elastic.co>
Co-authored-by: Zachary Tong <zach@elastic.co>
Co-authored-by: Christos Soulios <1561376+csoulios@users.noreply.github.com>
Co-authored-by: Tal Levy <JubBoy333@gmail.com>
This commit fixes our behavior regarding the responses we
return in various cases for the use of token related APIs.
More concretely:
- In the Get Token API with the `refresh` grant, when an invalid
(already deleted, malformed, unknown) refresh token is used in the
body of the request, we respond with `400` HTTP status code
and an `error_description` header with the message "could not
refresh the requested token".
Previously we would return erroneously return a `401` with "token
malformed" message.
- In the Invalidate Token API, when using an invalid (already
deleted, malformed, unknown) access or refresh token, we respond
with `404` and a body that shows that no tokens were invalidated:
```
{
"invalidated_tokens":0,
"previously_invalidated_tokens":0,
"error_count":0
}
```
The previous behavior would be to erroneously return
a `400` or `401` ( depending on the case ).
- In the Invalidate Token API, when the tokens index doesn't
exist or is closed, we return `400` because we assume this is
a user issue either because they tried to invalidate a token
when there is no tokens index yet ( i.e. no tokens have
been created yet or the tokens index has been deleted ) or the
index is closed.
- In the Invalidate Token API, when the tokens index is
unavailable, we return a `503` status code because
we want to signal to the caller of the API that the token they
tried to invalidate was not invalidated and we can't be sure
if it is still valid or not, and that they should try the request
again.
Resolves: #53323
I've noticed that a lot of our tests are using deprecated static methods
from the Hamcrest matchers. While this is not a big deal in any
objective sense, it seems like a small good thing to reduce compilation
warnings and be ready for a new release of the matcher library if we
need to upgrade. I've also switched a few other methods in tests that
have drop-in replacements.
Currently forbidden apis accounts for 800+ tasks in the build. These
tasks are aggressively created by the plugin. In forbidden apis 3.0, we
will get task avoidance
(https://github.com/policeman-tools/forbidden-apis/pull/162), but we
need to ourselves use the same task avoidance mechanisms to not trigger
these task creations. This commit does that for our foribdden apis
usages, in preparation for upgrading to 3.0 when it is released.
The MachineLearningIT.testStopDatafeed test was creating 3
jobs each with the default model memory limit of 1GB. This
meant that the test would not run on a machine with less than
10GB of RAM (due to the default ML memory percentage of 30%).
This change reduces the model memory limit for these jobs to
0.5GB, which means the test will run on a machine with only
5GB of RAM.
Relates to https://discuss.elastic.co/t/failed-ml-tests-when-running-the-gradle-check-task-against-unchanged-repo-code/227829
The usage of local parameter for GetFieldMappingRequest has been removed from the underlying transport action since v2.0.
This PR deprecates the parameter from rest layer. It will be removed in next major version.
* HLRC support for Index Templates V2 (#54838)
* HLRC support for Index Templates V2
This change adds High Level Rest Client support for Index Templates V2.
Relates to #53101
* fixed compilation error
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
Today when canceling a task we broadcast ban/unban requests to all nodes
in the cluster. This strategy does not scale well for hierarchical
cancellation. With this change, we will track outstanding child requests
and broadcast the cancellation to only nodes that have outstanding child
tasks. This change also prevents a parent task from sending child
requests once it got canceled.
Relates #50990
Supersedes #51157
Co-authored-by: Igor Motov <igor@motovs.org>
Co-authored-by: Yannick Welsch <yannick@welsch.lu>
Added decompression of gzip when gzip value is return as an header from Elasticsearch
(cherry picked from commit 4a195b573ab85d4e756669c953419ebdb3003442)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
Co-authored-by: Hakky54 <hakangoudberg@hotmail.com>
* [ML] add new inference_config field to trained model config (#54421)
A new field called `inference_config` is now added to the trained model config object. This new field allows for default inference settings from analytics or some external model builder.
The inference processor can still override whatever is set as the default in the trained model config.
* fixing for backport
* [ML] add num_matches and preferred_to_categories to category defintion objects (#54214)
This adds two new fields to category definitions.
- `num_matches` indicating how many documents have been seen by this category
- `preferred_to_categories` indicating which other categories this particular category supersedes when messages are categorized.
These fields are only guaranteed to be up to date after a `_flush` or `_close`
native change: https://github.com/elastic/ml-cpp/pull/1062
* adjusting for backport
Refactor SearchHit to have separate document and meta fields.
This is a part of bigger refactoring of issue #24422 to remove
dependency on MapperService to check if a field is metafield.
Relates to PR: #38373
Relates to issue #24422
Co-authored-by: sandmannn <bohdanpukalskyi@gmail.com>
This is a simple naming change PR, to fix the fact that "metadata" is a
single English word, and for too long we have not followed general
naming conventions for it. We are also not consistent about it, for
example, METADATA instead of META_DATA if we were trying to be
consistent with MetaData (although METADATA is correct when considered
in the context of "metadata"). This was a simple find and replace across
the code base, only taking a few minutes to fix this naming issue
forever.
Pipeline aggregations like `stats_bucket`, `sum_bucket`, and
`percentiles_bucket` only operate on buckets that have multiple buckets.
This adds support for those aggregations to `geo_distance`, `ip_range`,
`auto_date_histogram`, and `rare_terms`.
This all happened because we used a marker interface to mark compatible
aggs, `MultiBucketAggregationBuilder` and it was fairly easy to forget
to implement the interface.
This replaces the marker interface with an abstract method in
`AggregationBuilder`, `bucketCardinality` which makes you return `NONE`,
`ONE`, or `MANY`. The `bucket` aggregations can check for `MANY`. At
this point `ONE` and `NONE` amount to about the same thing, but I
suspect that'll be a useful distinction when validating bucket sorts.
Closes#53215
Fixing the naming of the HLRC values to match the ToXContent field names (i.e. the field names returned from an API call).
Also fixes the names in the _cat API as well.
closes#53946
* Add REST APIs for IndexTemplateV2Metadata CRUD (#54039)
* Add REST APIs for IndexTemplateV2Metadata CRUD
This commit adds the get/put/delete APIs for interacting with the now v2 versions of index
templates.
These APIs are behind the existing `es.itv2_feature_flag_registered` system property feature flag.
Relates to #53101
* Add exceptions for HLRC tests
* Add skips for 7.x versions
* Use index_template instead of template_v2 in action names
* Add test for MetaDataIndexTemplateService.addIndexTemplateV2
* Move removal to static method and add test
* Add unit tests for request classes (implement hashCode & equals)
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
* Fix compilation
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
optimize transform for group_by on date_histogram by injecting an additional range query. This limits the number of search and index requests and avoids unnecessary updates. Only recent buckets get re-written.
fixes#54254
This commit causes negative TimeValues, other than -1 which is sometimes used as
a sentinel value, to be rejected during parsing.
Also introduces a hack to allow ILM to load policies which were written to the
cluster state with a negative min_age, treating those values as 0, which should
match the behavior of prior versions.
This commit populates the _stats API response with sensible "empty"
`data_counts` and `memory_usage` objects when the job itself
has not started reporting them.
Backport of #54210
Currently we set the defaults for ccsMinimizeRoundtrips, preFilterShardSize and
requestCache on the HLRC SubmitAsyncSearchRequest in the constructor. This is no
longer needed since we now only send the parameters along with the rest request
that are supported (omitting e.g. ccsMinimizeRoundtrips) and the correct
defaults are set on the client side. This change removes setting and sending
these defaults where possible, leaving only the overwrite of batchedReduceSize
with a default value of 5, since the default used in the vanilla SearchRequest
is 512. However, we don't need to send this value along as a request parameter
if its the default since the correct one will be set on the receiving end if no
value is specified.
Also adding tests for RestSubmitAsyncSearchAction that check the correct
defaults are set when parameters are missing on the server side.
Backport of #54200
This commit renames wait_for_completion to wait_for_completion_timeout in submit async search and get async search.
Also it renames clean_on_completion to keep_on_completion and turns around its behaviour.
Closes#54069
Currently the remote info api has added a number of possible fields
(proxy, num_socket_connections, etc) that are available in proxy mode.
These fields are not aligned with what the settings are named. This
commit modifies this API to align with the settings.
This commit instruments data frame analytics
with stats for the data that are being analyzed.
In particular, we count training docs, test docs,
and skipped docs.
In order to account docs with missing values as skipped
docs for analyses that do not support missing values,
this commit changes the extractor so that it only ignores
docs with missing values when it collects the data summary,
which is used to estimate memory usage.
Backport of #53998
add 2 additional stats: processing time and processing total which capture the
time spent for processing results and how often it ran. The 2 new stats
correspond to the existing indexing and search stats. Together with indexing
and search this now allows the user to see the full picture, all 3 stages.
This commit changes the pre_filter_shard_size default from 128 to unspecified.
This allows to apply heuristics based on the request and the target indices when deciding
whether the can match phase should run or not. When unspecified, this pr runs the can match phase
automatically if one of these conditions is met:
* The request targets more than 128 shards.
* The request contains read-only indices.
* The primary sort of the query targets an indexed field.
Users can opt-out from this behavior by setting the `pre_filter_shard_size` to a static value.
Closes#39835
* Get Async Search: omit _clusters section when empty (#53907)
The _clusters section is omitted by the search API whenever no remote clusters are searched. Async search should do the same, but Get Async Search returns a deserialized response, hence a weird `_clusters` section with all values set to `0` gets returned instead. In fact the recreated Clusters object is not the same object as the EMPTY constant, yet it has the same content.
This commit addresses this by changing the comparison in the `toXContent` method to not print out the section if the number of total clusters is `0`.
* Async search: remove version from response (#53960)
The goal of the version field was to quickly show when you can expect to find something new in the search response, compared to when nothing has changed. This can also be done by looking at the `_shards` section and `num_reduce_phases` returned with the search response. In fact when there has been one or more additional reduction of the results, you can expect new results in the search response. Otherwise, the `_shards` section could notify of additional failures of shards that have completed the query, but that is not a guarantee that their results will be exposed (only when the following partial reduction is performed their results will be available).
That said this commit clarifies this in the docs and removes the version field from the async search response
* Async Search: replicas to auto expand from 0 to 1 (#53964)
This way single node clusters that are green don't go yellow once async search is used, while
all the others still have one replica.
* [DOCS] address timing issue in async search docs tests (#53910)
The docs snippets for submit async search have proven difficult to test as it is not possible to guarantee that you get a response that is not final, even when providing `wait_for_completion=0`. In the docs we want to show though a proper long-running query, and its first response should be partial rather than final.
With this commit we adapt the docs snippets to show a partial response, and replace under the hood all that's needed to make the snippets tests succeed when we get a final response. Also, increased the timeout so we always get a final response.
Closes#53887Closes#53891
This commits adds a data stream feature flag, initial definition of a data stream and
the stubs for the data stream create, delete and get APIs. Also simple serialization
tests are added and a rest test to thest the data stream API stubs.
This is a large amount of code and mainly mechanical, but this commit should be
straightforward to review, because there isn't any real logic.
The data stream transport and rest action are behind the data stream feature flag and
are only intialized if the feature flag is enabled. The feature flag is enabled if
elasticsearch is build as snapshot or a release build and the
'es.datastreams_feature_flag_registered' is enabled.
The integ-test-zip sets the feature flag if building a release build, otherwise
rest tests would fail.
Relates to #53100
This commit adds a new AsyncSearchClient to the High Level Rest Client which
initially supporst the submitAsyncSearch in its blocking and non-blocking
flavour. Also adding client side request and response objects and parsing code
to parse the xContent output of the client side AsyncSearchResponse together
with parsing roundtrip tests and a simple roundtrip integration test.
Relates to #49091
Backport of #53592
Adds parsing and indexing of analysis instrumentation stats.
The latest one is also returned from the get-stats API.
Note that we chose to duplicate objects even where they are currently
similar. There are already ideas on how these will diverge in the future
and while the duplication looks ugly at the moment, it is the option
that offers the highest flexibility.
Backport of #53788
Currently we don't send values for the `pre_filter_shard_size` and
`max_concurrent_shard_requests` SearchRequest parameters over http when using
the High Level Rest Client. This change adds these parameters to the
RequestConverters and tests.
Sometimes we want to deprecate and remove a ParseField entirely, without replacement;
for example, the various places where we specify a _type field in 7x. Currently we can
tell users only that a particular field name should not be used, and that another name should
be used in its place. This commit adds the ability to say that a field should not be used at
all.
changes the output format of preview regarding deduced mappings and enhances
it to return all the details about auto-index creation. This allows the user
to customize the index creation. Using HLRC you can create a index request
from the output of the response.
backport #53572
* Add REST API for ComponentTemplate CRUD
This adds the Put/Get/DeleteComponentTemplate APIs that allow inserting, retrieving, and removing
ComponentTemplateMetadata into the cluster state metadata.
These APIs are currently only available behind a feature flag system property -
`es.itv2_feature_flag_registered`.
Relates to #53101
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
Martijn van Groningen
Ryan Ernst
Mark Tozzi
Ioannis Kakavas
William Brafford
David Roberts
Mark Vieira
Yang Wang
Przemko Robakowski
Nhat Nguyen
Andrei Dan
Benjamin Trent
Christoph Büscher
Mayya Sharipova
Jason Tedor
Dimitris Athanasiou
Nik Everett
Lee Hinman
Hendrik Muhs
Gordon Brown
Armin Braun
Luca Cavanna
Tim Brooks
Przemysław Witek
Jim Ferenczi
Alan Woodward
David Kyle