When using gradle run by itself, this uses the default distro with a
basic license and enables security. There is a setup command to create
a elastic-admin user but only when the license is a trial license. Now
that security is available with the basic license, we should always run
this command when using the default distribution.
We initially added `requireDocker` for a way for tasks to say that they
absolutely must have it, like the build docker image tasks.
Projects using the test fixtures plugin are not in this both, as the
intent with these is that they will be skipped if docker and docker-compose
is not available.
Before this change we were lenient, the docker image build would succeed
but produce nothing. The implementation was also confusing as it was not
immediately obvious this was the case due to all the indirection in the
code.
The reason we have this leniency is that when we added the docker image
build, docker was a fairly new requirement for us, and we didn't have
it deployed in CI widely enough nor had CI configured to prefer workers
with docker when possible. We are in a much better position now.
The other reason was other stack teams running `./gradlew assemble`
in their respective CI and the possibility of breaking them if docker is
not installed. We have been advocating for building specific distros for
some time now and I will also send out an additional notice
The PR also removes the use of `requireDocker` from tests that actually
use test fixtures and are ok without it, and fixes a bug in test
fixtures that would cause incorrect configuration and allow some tasks
to run when docker was not available and they shouldn't have.
Closes #42680 and #42829 see also #42719
Enable audit logs in docker by creating console appenders for audit loggers.
also rename field @timestamp to timestamp and add field type with value audit
The docker build contains now two log4j configuration for oss or default versions. The build now allows override the default configuration.
Also changed the format of a timestamp from ISO8601 to include time zone as per this discussion #36833 (comment)
closes#42666
backport#42671
Before this change we would recurse to cache bwc versions.
This proved to be problematic due to the number of steps it was
generating taking too long.
Also this required tricky maintenance to break the recursion for old
branches we don't really care about.
With this change we now cache specific branches only.
Previously we used LoggedExec for running the internal bwc builds.
However, this had bad performance implications as all the output was
buffered into memory, thus we changed back to normal Exec. This commit
adds a `spoolOutput` setting to LoggedExec which can be used for
commands with large amounts of output, and switches the bwc builds to
use this flag.
The elasticsearch-cli helper script does not use the tempdir created by
elasticsearch-env, yet the env script still creates it. This can lead to
lots of temp directories being created when running cli scripts in an
automated fashion. This commit passes a fake tmpdir to the env script to
avoid creation.
closes#34445
This commit adds deletion of the bin directory to postrm cleanup. While
the package's bin files are cleaned up by the package manager, plugins
may have created subdirectories under bin. We already cleanup plugins,
but not the extra bin dirs their installation created.
closes#18109
Java 8 presents the JVM options slightly differently when displaying via
-XX:+PrintFlagsFinal. This commit adapts the JVM options parser for this
possibility.
Relates #42009
This commit removes manual parsing of JVM options when calculating
ergonomics. This is to avoid a situation that we parse values
differently than the JVM would. In fact, we already have a bug along
these lines today. It is possible to start the JVM with the same flag
multiple times on the command line. In this case, the last value
wins. For example, -Xmx1g -Xmx2g would start the JVM with a heap size of
two gigabytes. Our JVM ergonomics ignores this possibility and instead
the first value is winning!
Our strategy to avoid manual parsing of the JVM options is to start the
Java command line parser (without actually starting a JVM) by invoking
java with the same command line flags as presented and request that the
JVM tell us what values it would start with. This ensures that we have
the correct values when making ergonomic decisions.
Moreover, our strategy also is ignoring ES_JAVA_OPTS which could
override the heap size as well leading to incorrect ergonomic
choices. This commit address this issue too.
The deb package has been updated several times in the past to contain
overrides in order to pass lintian inspection. However, there have never
been any tests to ensure we do not fallback to failure. This commit
updates the overrides file given things that have changed since 2.x like
adding ML and bundling the jdk.
closes#17185
We currently download 3 variants of the same version of the jdk for
bundling into the distributions. Additionally, the vagrant images do
their own downloading. This commit moves the jdk downloading into a
utility gradle plugin. This will be used in a future PR by the packaging
tests.
The new plugin exposes a "jdks" project extension which allows creating
named jdks. Once the jdk version and platform are set for a named jdk,
the jdk object may be used as a lazy String for the jdk home path, or a
file collection for copying.
testclusters detect from settings that security is enabled
if a user is not specified using the DSL introduced in this PR, a default one is created
the appropriate wait conditions are used authenticating with the first user defined in the DSL ( or the default user ).
an example DSL to create a user is user username:"test_user" password:"x-pack-test-password" role: "superuser" all keys are optional and default to the values shown in this example
We have faked some Ivy repositories on a few artifact locations. Today
when Gradle attempts to resolve these artifacts, it follows its default
strategy to search for Gradle metadata, then Maven POM files, then Ivy
descriptors, and finally will fallback to looking directly for the
artifact. This wastes times on remote network calls that will 404 anyway
since these metadata resources will not exist for these fake Ivy
repositories. This commit overrides the Gradle strategy to look directly
for artifacts.
When Elasticsearch is run from a package installation, the running
process does not have permissions to write to the keystore. This is
because of the root:root ownership of /etc/elasticsearch. This is why we
create the keystore if it does not exist during package installation. If
the keystore needs to be upgraded, that is currently done by the running
Elasticsearch process. Yet, as just mentioned, the Elasticsearch process
would not have permissions to do that during runtime. Instead, this
needs to be done during package upgrade. This commit adds an upgrade
command to the keystore CLI for this purpose, and that is invoked during
package upgrade if the keystore already exists. This ensures that we are
always on the latest keystore format before the Elasticsearch process is
invoked, and therefore no upgrade would be needed then. While this bug
has always existed, we have not heard of reports of it in practice. Yet,
this bug becomes a lot more likely with a recent change to the format of
the keystore to remove the distinction between file and string entries.
We use Bouncy Castle to verify signatures when installing official
plugins. This leads to illegal access warnings because Bouncy Castle
accesses the Sun security provider constructor. This commit adds an
add-opens flag to suppress this illegal access.
This commit bumps the bundled JDK to version 12.0.1. Note that we had to
add a new pattern here as Oracle has changed the source of the
builds. This commit will be backported to 6.7 in a different form to
bump the bundled JDK in the Docker images too.
We had been obtaining JDK distributions from download.java.net. This
site is now presenting a certificate that does not list
download.java.net as a SAN. Therefore with host verification, the build
can not use this site. This commit switches to using download.oracle.com
which appears to be an alternative name for the same CNAME
download.oracle.com.edgekey.net. This allows our builds to resume.
hamcrest has some improvements in newer versions, like FileMatchers
that make assertions regarding file exists cleaner. This commit upgrades
to the latest version of hamcrest so we can start using new and improved
matchers.
The pid dir for both systemd and init.d is already managed by those
respective systems (tmpfiles.d and the init script, respectively). Since
the /var/run dir is often mounted as tmpfs, it does not make sense to
have the elasticsearch pid dir added by the package installation. This
commit removes that empty dir from deb and rpm.
This commit adds a filter to the files include from modules to only
include platform specific files relevant to the distribution being
built. For example, the deb files on linux would now only include linux
ML binaries, and not windows or macos files.
* fix the packer cache script
This PR disabled the explicit pull since it seems this always tries to
work with a registry.
Functionality will not be affected since we will still build the images
on pull.
Instead of allowing docker-compose to rebuild it.
With this change we tag the image with a test label, and use that
in the testing as this is simpler that dealing with a dynamically
generated docker-compose file.
This commit changes the bwc builds from a single task for a branch to a
task for each bwc artifact. This reduces the bwc build time when only
needing a specific artifact, for example when running cluster restart
tests on a mac, the windows artifacts or rpm/debs are not needed.
This commit fixes an issue when the artifact used to build the Docker
image is sourced from artifacts.elastic.co. In particular, the artifact
was not downloaded to the proper location.
* Replace usages RandomizedTestingTask with built-in Gradle Test (#40978)
This commit replaces the existing RandomizedTestingTask and supporting code with Gradle's built-in JUnit support via the Test task type. Additionally, the previous workaround to disable all tasks named "test" and create new unit testing tasks named "unitTest" has been removed such that the "test" task now runs unit tests as per the normal Gradle Java plugin conventions.
(cherry picked from commit 323f312bbc829a63056a79ebe45adced5099f6e6)
* Fix forking JVM runner
* Don't bump shadow plugin version
We previously found a bug in the JVM where AVX-512 instructions could
crash the JVM to crash with a segmentation fault. This bug impacted JDK
9 and JDK 10, but was most prominent on JDK 10 because AVX-512 was
enabled there by default. In JDK 11, this bug is reported fixed so this
commit restricts the disabling of AVX-512 to JDK 10 only. Since we no
longer support JDK 10 for any versions that this commit will be
integrated into (7.1, 8.0), we simply remove the disabling of this flag
from the JVM options.
This commit deprecates versions of Java prior to Java 11. This commit
will cause a warning to be printed to standard error when any command
line tool is invoked, or when Elasticsearch is started. Additionally, we
log a deprecation message when Elasticsearch is started.
* Add notice for bundled jdk
This commit adds the license/notice for the bundled openjdk.
* First draft
* iteration
* Fix package notices
* Iteration
* One more iteration
While yum does retry retrieving files 10 times by default [1], slow
network fetches, governed by `minrate` cause immediate aborts without
getting retried.
Wrap yum commands in a 10 iteration retry loop.
[1] http://man7.org/linux/man-pages/man5/yum.conf.5.html
Backport of #40349
On windows, JAVA_HOME is currently resolved when the windows service is started. However, this is contrary to what our documentation states. This commit moves resolution to service install. This has the side effect of making java existence checking optional in elasticsearch-env.bat, since the rest of the service commands do not require java.
closes#30720
This change removes the use of hardcoded port values for the
idp-fixture in favor of the mapped ephemeral ports. This should prevent
failures due to port conflicts in CI.
* Revert "Configure TMP for test nodes on Windows (#39959)"
This reverts commit 97562a874fcb1f29fb05272ab860a0307e97d1aa.
* Configure a tmp dir without spaces
* Pass on TMP instead of changing it
Alpar Torok
Chris Koehnke
Ryan Ernst
Vincent Boulaye
Jay Modi
Mark Vieira
Przemyslaw Gomulka
Jason Tedor
Alpar Torok
Yogesh Gaikwad
Ioannis Kakavas
Dimitrios Liappis