Currently replication and recovery are both coordinated through the latest cluster state available on the ClusterService as well as through the GlobalCheckpointTracker (to have consistent local/global checkpoint information), making it difficult to understand the relation between recovery and replication, and requiring some tricky checks in the recovery code to coordinate between the two. This commit makes the primary the single owner of its replication group, which simplifies the replication model and allows to clean up corner cases we have in our recovery code. It also reduces the dependencies in the code, so that neither RecoverySourceXXX nor ReplicationOperation need access to the latest state on ClusterService anymore. Finally, it gives us the property that in-sync shard copies won't receive global checkpoint updates which are above their local checkpoint (relates #25485).
It was brought up that our current client artifacts have generic names like 'rest' that may cause conflicts with other artifacts.
This commit renames:
- rest -> elasticsearch-rest-client
- sniffer -> elasticsearch-rest-client-sniffer
- rest-high-level -> elasticsearch-rest-high-level-client
A couple of small changes are also preparing the high level client for its first release.
Closes#20248
We already use a per JVM port range in MockTransportService. Yet,
it's possible that if we are executing in the JVM with ordinal 0 that
other clusters reuse ports from the mock transport service and some tests
try to simulate disconnects etc. By using a non-defautl port range (starting at 10300)
we prevent internal test clusters from reusing any of the mock impls ports
Relates to #25301
Today if we search across a large amount of shards we hit every shard. Yet, it's quite
common to search across an index pattern for time based indices but filtering will exclude
all results outside a certain time range ie. `now-3d`. While the search can potentially hit
hundreds of shards the majority of the shards might yield 0 results since there is not document
that is within this date range. Kibana for instance does this regularly but used `_field_stats`
to optimize the indexes they need to query. Now with the deprecation of `_field_stats` and it's upcoming removal a single dashboard in kibana can potentially turn into searches hitting hundreds or thousands of shards and that can easily cause search rejections even though the most of the requests are very likely super cheap and only need a query rewriting to early terminate with 0 results.
This change adds a pre-filter phase for searches that can, if the number of shards are higher than a the `pre_filter_shard_size` threshold (defaults to 128 shards), fan out to the shards
and check if the query can potentially match any documents at all. While false positives are possible, a negative response means that no matches are possible. These requests are not subject to rejection and can greatly reduce the number of shards a request needs to hit. The approach here is preferable to the kibana approach with field stats since it correctly handles aliases and uses the correct threadpools to execute these requests. Further it's completely transparent to the user and improves scalability of elasticsearch in general on large clusters.
There is a bug when a call to `BytesReferenceStreamInput` skip is made
on a `BytesReference` that has an initial offset. The offset for the
current slice is added to the current index and then subtracted from the
length. This introduces the possibility of a negative number of bytes to
skip. This happens inside a loop, which leads to an infinte loop.
This commit correctly subtracts the current slice index from the
slice.length. Additionally, the `BytesArrayTests` are modified to test
instances that include an offset.
This is a protection mechanism to prevent a single search request from
hitting a large number of shards in the cluster concurrently. If a search is
executed against all indices in the cluster this can easily overload the cluster
causing rejections etc. which is not necessarily desirable. Instead this PR adds
a per request limit of `max_concurrent_shard_requests` that throttles the number of
concurrent initial phase requests to `256` by default. This limit can be increased per request
and protects single search requests from overloading the cluster. Subsequent PRs can introduces
addiontional improvemetns ie. limiting this on a `_msearch` level, making defaults a factor of
the number of nodes or sort shards iters such that we gain the best concurrency across nodes.
We lost the cluster alias due to some special caseing in inner hits
and due to the fact that we didn't pass on the alias to the shard request.
This change ensures that we have the cluster alias present on the shard to
ensure all SearchShardTarget reads preserve the alias.
Relates to #25606
Currently when we close a channel in Netty4Utils.closeChannels we
block until the closing is complete. This introduces the possibility
that a network selector thread will block while waiting until a
separate network selector thread closes a channel.
For instance: T1 closes channel 1 (which is assigned to a T1 selector).
Channel 1's close listener executes the closing of the node. That
means that T1 now tries to close channel 2. However, channel 2 is
assigned to a selector that is running on T2. T1 now must wait until T2
closes that channel at some point in the future.
This commit addresses this by adding a boolean to closeChannels
indicating if we should block on close. We only set this boolean to true
if we are closing down the server channels at shutdown. This call is
never made from a network thread. When we call the closeChannels method
with that boolean set to false, we do not block on close.
This change collapses some of the packages for the bucket aggregations into their parent packages. This was done for the following aggregations:
* The variants of the range aggregation (geo_distance, date and ip) were moved into the `o.e.s.a.bucket.range` package
* The `o.e.s.a.bucket.terms.support` package was removed and the classes were moved to `o.e.s.a.bucket.terms`
* The filter aggregation was moved to `o.e.s.a.bucket.filter`
Since this PR is already relatively large with only the above changes subsequent PRs will do similar operations on relevant metric and pipeline aggregations
Relates to #22868
We currently check whether translog files can be trimmed whenever we create a new translog generation or close a view. However #25294 added a long translog retention period (12h, max 512MB by default), which means translog files should potentially be cleaned up long after there isn't any indexing activity to trigger flushes/the creation of new translog files. We therefore need a scheduled background check to clean up those files once they are no longer needed.
Relates to #10708
This commit does two things:
- bumps the version from 6.0.0-alpha3 to 6.0.0-beta1
- renames the 6.0.0-alpha3 version constant to 6.0.0-beta1
Relates #25621
This commit adds cross-settings validation for the low/high/flood stage
disk watermark settings. This validation was enabled by the introduction
of multiple settings validation.
Relates #25600
This commit refactors the global checkpont tracker to make it more
resilient. The main idea is to make it more explicit what state is
actually captured and how that state is updated through
replication/cluster state updates etc. It also fixes the issue where the
local checkpoint information is not being updated when a shard becomes
primary. The primary relocation handoff becomes very simple too, we can
just verbatim copy over the internal state.
Relates #25468
* Improved REST endpoint exception handling, see #15335
Also improved OPTIONS http method handling to better conform with the
http spec.
* Tidied up formatting and comments
See #15335
* Tests for #15335
* Cleaned up comments, added section number
* Swapped out tab indents for space indents
* Test class now extends ESSingleNodeTestCase
* Capture RestResponse so it can be examined in test cases
Simple addition to surface the RestResponse object so we can run tests
against it (see issue #15335).
* Refactored class name, included feedback
See #15335.
* Unit test for REST error handling enhancements
Randomizing unit test for enhanced REST response error handling. See
issue #15335 for more details.
* Cleaned up formatting
* New constructor to set HTTP method
Constructor added to support RestController test cases.
* Refactored FakeRestRequest, streamlined test case.
* Cleaned up conflicts
* Tests for #15335
* Added functionality to ignore or include path wildcards
See #15335
* Further enhancements to request handling
Refactored executeHandler to prioritize explicit path matches. See
#15335 for more information.
* Cosmetic fixes
* Refactored method handlers
* Removed redundant import
* Updated integration tests
* Refactoring to address issue #17853
* Cleaned up test assertions
* Fixed edge case if OPTIONS method randomly selected as invalid method
In this test, an OPTIONS method request is valid, and should not return
a 405 error.
* Remove redundant static modifier
* Hook the multiple PathTrie attempts into RestHandler.dispatchRequest
* Add missing space
* Correctly retrieve new handler for each Trie strategy
* Only copy headers to threadcontext once
* Fix test after REST header copying moved higher up
* Restore original params when trying the next trie candidate
* Remove OPTIONS for invalidHttpMethodArray so a 405 is guaranteed in tests
* Re-add the fix I already added and got removed during merge :-/
* Add missing GET method to test
* Add documentation to migration guide about breaking 404 -> 405 changes
* Explain boolean response, pull into local var
* fixup! Explain boolean response, pull into local var
* Encapsulate multiple HTTP methods into PathTrie<MethodHandlers>
* Add PathTrie.retrieveAll where all matching modes can be retrieved
Then TrieMatchingMode can be package private and not leak into RestController
* Include body of error with 405 responses to give hint about valid methods
* Fix missing usageService handler addition
I accidentally removed this :X
* Initialize PathTrieIterator modes with Arrays.asList
* Use "== false" instead of !
* Missing paren :-/
Indexing ids in binary form should help with indexing speed since we would
have to compare fewer bytes upon sorting, should help with memory usage of
the live version map since keys will be shorter, and might help with disk
usage depending on how efficient the terms dictionary is at compressing
terms.
Since we can only expect base64 ids in the auto-generated case, this PR tries
to use an encoding that makes the binary id equal to the base64-decoded id in
the majority of cases (253 out of 256). It also specializes numeric ids, since
this seems to be common when content that is stored in Elasticsearch comes
from another database that uses eg. auto-increment ids.
Another option could be to require base64 ids all the time. It would make things
simpler but I'm not sure users would welcome this requirement.
This PR should bring some benefits, but I expect it to be mostly useful when
coupled with something like #24615.
Closes#18154
Transport profiles unfortunately have never been validated. Yet, it's very
easy to make a mistake when configuring profiles which will most likely stay
undetected since we don't validate the settings but allow almost everything
based on the wildcard in `transport.profiles.*`. This change removes the
settings subset based parsing of profiles but rather uses concrete affix settings
for the profiles which makes it easier to fall back to higher level settings since
the fallback settings are present when the profile setting is parsed. Previously, it was
unclear in the code which setting is used ie. if the profiles settings (with removed
prefixes) or the global node setting. There is no distinction anymore since we don't pull
prefix based settings.
Some tests use MockTransportService to do network based testing.
Yet, we run tests in multiple JVMs that means
concurrent tests could claim port that another JVM just released
and if that test tries to simulate a disconnect it might be smart
enough to re-connect depending on what is tested. To reduce the risk,
since this is very hard to debug we use a different default
port range per JVM unless the incoming settings overriding it.
Closes#25301
Today when we run out of disk all kinds of crazy things can happen
and nodes are becoming hard to maintain once out of disk is hit.
While we try to move shards away if we hit watermarks this might not
be possible in many situations. Based on the discussion in #24299
this change monitors disk utilization and adds a flood-stage watermark
that causes all indices that are allocated on a node hitting the flood-stage
mark to be switched read-only (with the option to be deleted). This allows users to react on the low disk
situation while subsequent write requests will be rejected. Users can switch
individual indices read-write once the situation is sorted out. There is no
automatic read-write switch once the node has enough space. This requires
user interaction.
The flood-stage watermark is set to `95%` utilization by default.
Closes#24299
All query builders written as self contained xContent objects, to we should mark
them accordingly using ToXContentObject. This also makes it possible to use
things like XContentHelper#toXContent to render query builders in tests.
QueryParseContext is currently only used as a wrapper for an XContentParser, so
this change removes it entirely and changes the appropriate APIs that use it so
far to only accept a parser instead.
This commit makes the use of the global network settings explicit instead
of implicit within NetworkService. It cleans up several places where we fall
back to the global settings while we should have used tcp or http ones.
In addition this change also removes unnecessary settings classes
Hadoop 2.7.x libraries fail when running on JDK9 due to the version string changing to a single
character. On Hadoop 2.8, this is no longer a problem, and it is unclear on whether the fix will be
backported to the 2.7 branch. This commit upgrades our dependency of Hadoop for the HDFS
Repository to 2.8.1.
We have various assertions that check we never block on transport
threads. This commit adds the thread names for the NioTransport to
these assertions.
With this change I had to fix two places where we were calling blocking
methods from the transport threads.
This commit adds additional protection to `ESSelector` and its
implementations to ensure that channels are not enqueued after the
selector is closed.
After a channel has been added to the queue, we check that the selector
is open. If it is not, then we remove the channel from the queue. If the
channel is removed successfully, we throw an `IllegalStateException`.
Our current TCPTransport logic assumes that we do not pass pings to
the TCPTransport level.
This commit fixes an issue where NioTransport was passing pings to
TCPTransport and leading to exceptions.
Currently QueryParseContext is only a thin wrapper around an XContentParser that
adds little functionality of its own. I provides helpers for long deprecated
field names which can be removed and two helper methods that can be made static
and moved to other classes. This is a first step in helping to remove
QueryParseContext entirely.
In SimpleNioTransportTests we assert that an IOException has a certain
message. This message appears that it is not dependible (and might
change based on platform).
Our other transport tests (mock and netty) do not make this assertion.
Instead they only assert on our application exception message. This
commit removes the IOException message assertion. And retains the
ConnectTransportException message assertion.
This commit introduces a nio based tcp transport into framework for
testing.
Currently Elasticsearch uses a simple blocking tcp transport for
testing purposes (MockTcpTransport). This diverges from production
where our current transport (netty) is non-blocking.
The point of this commit is to introduce a testing variant that more
closely matches the behavior of production instances.
This commit removes path.conf as a valid setting and replaces it with a
command-line flag for specifying a non-default path for configuration.
Relates #25392
The following token filters were moved: stemmer, stemmer_override, kstem, dictionary_decompounder, hyphenation_decompounder, reverse, elision and truncate.
Relates to #23658
While real secure settings (ie an ES keystore) cannot be merged
together, mocked secure settings can and need to be sometimes merged.
This commit adds a merge method to allow tests to merge together
multiple instances of secure settings.
OldIndexBackwardsCompatibilityIT#testOldClusterStates tested whether global and index metadata could be read from data directory,
this can also be tested in full cluster qa test that checks cluster state via api.
Relates to #24939
#25147 added the translog deletion policy but didn't enable it by default. This PR enables a default retention of 512MB (same maximum size of the current translog) and an age of 12 hours (i.e., after 12 hours all translog files will be deleted). This increases to chance to have an ops based recovery, even if the primary flushed or the replica was offline for a few hours.
In order to see which parts of the translog are committed into lucene the translog stats are extended to include information about uncommitted operations.
Views now include all translog ops and guarantee, as before, that those will not go away. Snapshotting a view allows to filter out generations that are not relevant based on a specific sequence number.
Relates to #10708
Most notable changes:
- better update concurrency: LUCENE-7868
- TopDocs.totalHits is now a long: LUCENE-7872
- QueryBuilder does not remove the boolean query around multi-term synonyms:
LUCENE-7878
- removal of Fields: LUCENE-7500
For the `TopDocs.totalHits` change, this PR relies on the fact that the encoding
of vInts and vLongs are compatible: you can write and read with any of them as
long as the value can be represented by a positive int.
MockTransportServices allows us to simulate network disruptions in our testing infra. Sadly it wasn't updated to the state of the art in Transport land. This PR brings it up to speed. Specifically:
1) Opening a connection is now also blocked (before only node connections were blocked)
2) Simplifies things using the latest connection based notification between TcpTransport and TransportService for when a disconnect happens.
3) By 2, it fixes a race condition where we may fail to respond to a sent request when it is sent concurrently with the closing of a connection. The old code relied on a node based bridge between tcp transport and transport service. Sadly, the following doesn't work any more:
```
if (transport.nodeConnected(node)) {
// this a connected node, disconnecting from it will be up the exception
transport.disconnectFromNode(node); <-- this may now be a noop and it doesn't mean that the transport service was notified of the disconnect between the nodeConnected check and here.
} else {
throw new ConnectTransportException(node, reason, e);
}
```
If secure settings are closed after the node has been constructed
no key-store access is permitted. We should also try to be as close as possible
to the real behavior if we mock secure settings. This change also adds
the same behavior as bootstrap has to InternalTestCluster to ensure we fail
if we try to read from secure settings after the node has been constructed.
In MockFSDirectory we should use the actual indexes settings to build
a new IndexMetaData settings object instead of the node settings.
Relates to #25297
I'm still trying to hunt down rare failures in the cancelation tests
for reindex and friends. Here is the latest:
https://elasticsearch-ci.elastic.co/job/elastic+elasticsearch+5.x+multijob-unix-compatibility/os=ubuntu/876/console
It doesn't show much, other than that one of the tasks didn't kill
itself when asked to cancel.
So I'm going a bit crazy with debug logging so that the next time this
comes up I can trace exactly what happened.
Additionally, this tweaks the logic around how rethrottles were
performed around cancel. Previously we set the `requestsPerSecond`
to `0` when we cancelled the task. That was the "old way" to set them
to inifity which was the intent. This switches that from `0` to
`Float.MAX_VALUE` which is the "new way" to set the `requestsPerSecond`
to infinity. I don't know that this is much better, but it feels better.
In tests, we sometimes create a random directory service and as part of that the IndexSettings get
built again. When we build them again, we need to make sure we do not set the secure settings on
the new IndexMetaData object that gets created as the node settings already have the secure
settings and the index settings and node settings will be combined. If both have secure settings,
the settings builder will throw an AlreadySetException.
Indexing or deleting documents through the IndexShard interface is quite complex and error-prone. It requires multiple calls, e.g. first prepareIndexOnPrimary, then do some checks if mapping updates have occurred, then do the actual indexing using index(...) etc. Currently each consumer of the interface (local recovery, peer recovery, replication) has additional custom checks built around it to deal with mapping updates, some of which are even inconsistent. This commit aims at reducing the complexity by exposing a simpler interface on IndexShard. There are no more prepare*** methods and the mapping complexity is also hidden, but still giving callers a possibility to implement custom logic to deal with mapping updates.
Today we maintain a map of open connections in order to close them when
a low level channel gets closed or handles a failure. We also spawn a thread due to some
tricky concurrency issues especially with respect to netty since they listener might
be called on a transport / boss thread. Executions on those threads must not be blocking
since otherwise we will likely deadlock the event processing which adds to the
complexity of the concurrency model in this class.
This change associates the connection with the close callback that every channel invokes
once it's closed which allows us to remove the connections map. A relaxed non-blocking
concurrency model in the connection close listener allows cleaning up connected nodes without
blocking on any lock.
This change adds tests for the aggregation parsing that try to simulate that we
can parse existing aggregations in a forward compatible way in the future,
ignoring potential newly added fields or substructures to the xContent response.
Removes the `assemble` task from the `build` task when we have
removed `assemble` from the project. We removed `assemble` from
projects that aren't published so our releases will be faster. But
That broke CI because CI builds with `gradle precommit build` and,
it turns out, that `build` includes `check` and `assemble`. With
this change CI will only run `check` for projects without an
`assemble`.
Today TcpTransport is the de-facto base-class for transport implementations.
The need for all the callbacks we have in TransportServiceAdaptor are not necessary
anymore since we can simply have the logic inside the base class itself. This change
moves the stats metrics directly into TcpTransport removing the need for low level
bytes send / received callbacks.
Yannick Welsch
Luca Cavanna
Simon Willnauer
Tim Brooks
Colin Goodheart-Smithe
Boaz Leskes
Jason Tedor
Nik Everett
Lee Hinman
Adrien Grand
Martijn van Groningen
Christoph Büscher
James Baiera
Ryan Ernst
Jay Modi