* [ML] add num_matches and preferred_to_categories to category defintion objects (#54214)
This adds two new fields to category definitions.
- `num_matches` indicating how many documents have been seen by this category
- `preferred_to_categories` indicating which other categories this particular category supersedes when messages are categorized.
These fields are only guaranteed to be up to date after a `_flush` or `_close`
native change: https://github.com/elastic/ml-cpp/pull/1062
* adjusting for backport
Refactor SearchHit to have separate document and meta fields.
This is a part of bigger refactoring of issue #24422 to remove
dependency on MapperService to check if a field is metafield.
Relates to PR: #38373
Relates to issue #24422
Co-authored-by: sandmannn <bohdanpukalskyi@gmail.com>
This is a simple naming change PR, to fix the fact that "metadata" is a
single English word, and for too long we have not followed general
naming conventions for it. We are also not consistent about it, for
example, METADATA instead of META_DATA if we were trying to be
consistent with MetaData (although METADATA is correct when considered
in the context of "metadata"). This was a simple find and replace across
the code base, only taking a few minutes to fix this naming issue
forever.
Pipeline aggregations like `stats_bucket`, `sum_bucket`, and
`percentiles_bucket` only operate on buckets that have multiple buckets.
This adds support for those aggregations to `geo_distance`, `ip_range`,
`auto_date_histogram`, and `rare_terms`.
This all happened because we used a marker interface to mark compatible
aggs, `MultiBucketAggregationBuilder` and it was fairly easy to forget
to implement the interface.
This replaces the marker interface with an abstract method in
`AggregationBuilder`, `bucketCardinality` which makes you return `NONE`,
`ONE`, or `MANY`. The `bucket` aggregations can check for `MANY`. At
this point `ONE` and `NONE` amount to about the same thing, but I
suspect that'll be a useful distinction when validating bucket sorts.
Closes#53215
Fixing the naming of the HLRC values to match the ToXContent field names (i.e. the field names returned from an API call).
Also fixes the names in the _cat API as well.
closes#53946
* Add REST APIs for IndexTemplateV2Metadata CRUD (#54039)
* Add REST APIs for IndexTemplateV2Metadata CRUD
This commit adds the get/put/delete APIs for interacting with the now v2 versions of index
templates.
These APIs are behind the existing `es.itv2_feature_flag_registered` system property feature flag.
Relates to #53101
* Add exceptions for HLRC tests
* Add skips for 7.x versions
* Use index_template instead of template_v2 in action names
* Add test for MetaDataIndexTemplateService.addIndexTemplateV2
* Move removal to static method and add test
* Add unit tests for request classes (implement hashCode & equals)
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
* Fix compilation
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
optimize transform for group_by on date_histogram by injecting an additional range query. This limits the number of search and index requests and avoids unnecessary updates. Only recent buckets get re-written.
fixes#54254
This commit causes negative TimeValues, other than -1 which is sometimes used as
a sentinel value, to be rejected during parsing.
Also introduces a hack to allow ILM to load policies which were written to the
cluster state with a negative min_age, treating those values as 0, which should
match the behavior of prior versions.
This commit populates the _stats API response with sensible "empty"
`data_counts` and `memory_usage` objects when the job itself
has not started reporting them.
Backport of #54210
Currently we set the defaults for ccsMinimizeRoundtrips, preFilterShardSize and
requestCache on the HLRC SubmitAsyncSearchRequest in the constructor. This is no
longer needed since we now only send the parameters along with the rest request
that are supported (omitting e.g. ccsMinimizeRoundtrips) and the correct
defaults are set on the client side. This change removes setting and sending
these defaults where possible, leaving only the overwrite of batchedReduceSize
with a default value of 5, since the default used in the vanilla SearchRequest
is 512. However, we don't need to send this value along as a request parameter
if its the default since the correct one will be set on the receiving end if no
value is specified.
Also adding tests for RestSubmitAsyncSearchAction that check the correct
defaults are set when parameters are missing on the server side.
Backport of #54200
This commit renames wait_for_completion to wait_for_completion_timeout in submit async search and get async search.
Also it renames clean_on_completion to keep_on_completion and turns around its behaviour.
Closes#54069
Currently the remote info api has added a number of possible fields
(proxy, num_socket_connections, etc) that are available in proxy mode.
These fields are not aligned with what the settings are named. This
commit modifies this API to align with the settings.
This commit instruments data frame analytics
with stats for the data that are being analyzed.
In particular, we count training docs, test docs,
and skipped docs.
In order to account docs with missing values as skipped
docs for analyses that do not support missing values,
this commit changes the extractor so that it only ignores
docs with missing values when it collects the data summary,
which is used to estimate memory usage.
Backport of #53998
add 2 additional stats: processing time and processing total which capture the
time spent for processing results and how often it ran. The 2 new stats
correspond to the existing indexing and search stats. Together with indexing
and search this now allows the user to see the full picture, all 3 stages.
This commit changes the pre_filter_shard_size default from 128 to unspecified.
This allows to apply heuristics based on the request and the target indices when deciding
whether the can match phase should run or not. When unspecified, this pr runs the can match phase
automatically if one of these conditions is met:
* The request targets more than 128 shards.
* The request contains read-only indices.
* The primary sort of the query targets an indexed field.
Users can opt-out from this behavior by setting the `pre_filter_shard_size` to a static value.
Closes#39835
* Get Async Search: omit _clusters section when empty (#53907)
The _clusters section is omitted by the search API whenever no remote clusters are searched. Async search should do the same, but Get Async Search returns a deserialized response, hence a weird `_clusters` section with all values set to `0` gets returned instead. In fact the recreated Clusters object is not the same object as the EMPTY constant, yet it has the same content.
This commit addresses this by changing the comparison in the `toXContent` method to not print out the section if the number of total clusters is `0`.
* Async search: remove version from response (#53960)
The goal of the version field was to quickly show when you can expect to find something new in the search response, compared to when nothing has changed. This can also be done by looking at the `_shards` section and `num_reduce_phases` returned with the search response. In fact when there has been one or more additional reduction of the results, you can expect new results in the search response. Otherwise, the `_shards` section could notify of additional failures of shards that have completed the query, but that is not a guarantee that their results will be exposed (only when the following partial reduction is performed their results will be available).
That said this commit clarifies this in the docs and removes the version field from the async search response
* Async Search: replicas to auto expand from 0 to 1 (#53964)
This way single node clusters that are green don't go yellow once async search is used, while
all the others still have one replica.
* [DOCS] address timing issue in async search docs tests (#53910)
The docs snippets for submit async search have proven difficult to test as it is not possible to guarantee that you get a response that is not final, even when providing `wait_for_completion=0`. In the docs we want to show though a proper long-running query, and its first response should be partial rather than final.
With this commit we adapt the docs snippets to show a partial response, and replace under the hood all that's needed to make the snippets tests succeed when we get a final response. Also, increased the timeout so we always get a final response.
Closes#53887Closes#53891
This commits adds a data stream feature flag, initial definition of a data stream and
the stubs for the data stream create, delete and get APIs. Also simple serialization
tests are added and a rest test to thest the data stream API stubs.
This is a large amount of code and mainly mechanical, but this commit should be
straightforward to review, because there isn't any real logic.
The data stream transport and rest action are behind the data stream feature flag and
are only intialized if the feature flag is enabled. The feature flag is enabled if
elasticsearch is build as snapshot or a release build and the
'es.datastreams_feature_flag_registered' is enabled.
The integ-test-zip sets the feature flag if building a release build, otherwise
rest tests would fail.
Relates to #53100
This commit adds a new AsyncSearchClient to the High Level Rest Client which
initially supporst the submitAsyncSearch in its blocking and non-blocking
flavour. Also adding client side request and response objects and parsing code
to parse the xContent output of the client side AsyncSearchResponse together
with parsing roundtrip tests and a simple roundtrip integration test.
Relates to #49091
Backport of #53592
Adds parsing and indexing of analysis instrumentation stats.
The latest one is also returned from the get-stats API.
Note that we chose to duplicate objects even where they are currently
similar. There are already ideas on how these will diverge in the future
and while the duplication looks ugly at the moment, it is the option
that offers the highest flexibility.
Backport of #53788
Currently we don't send values for the `pre_filter_shard_size` and
`max_concurrent_shard_requests` SearchRequest parameters over http when using
the High Level Rest Client. This change adds these parameters to the
RequestConverters and tests.
Sometimes we want to deprecate and remove a ParseField entirely, without replacement;
for example, the various places where we specify a _type field in 7x. Currently we can
tell users only that a particular field name should not be used, and that another name should
be used in its place. This commit adds the ability to say that a field should not be used at
all.
changes the output format of preview regarding deduced mappings and enhances
it to return all the details about auto-index creation. This allows the user
to customize the index creation. Using HLRC you can create a index request
from the output of the response.
backport #53572
* Add REST API for ComponentTemplate CRUD
This adds the Put/Get/DeleteComponentTemplate APIs that allow inserting, retrieving, and removing
ComponentTemplateMetadata into the cluster state metadata.
These APIs are currently only available behind a feature flag system property -
`es.itv2_feature_flag_registered`.
Relates to #53101
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
Re-applies the change from #53523 along with test fixes.
closes#53626closes#53624closes#53622closes#53625
Co-authored-by: Nik Everett <nik9000@gmail.com>
Co-authored-by: Lee Hinman <dakrone@users.noreply.github.com>
Co-authored-by: Jake Landis <jake.landis@elastic.co>
Adds a new parameter for classification that enables choosing whether to assign labels to
maximise accuracy or to maximise the minimum class recall.
Fixes#52427.
This changes the `top_metrics` aggregation to return metrics in their
original type. Since it only supports numerics, that means that dates,
longs, and doubles will come back as stored, with their appropriate
formatter applied.
Adds a new `default_field_map` field to trained model config objects.
This allows the model creator to supply field map if it knows that there should be some map for inference to work directly against the training data.
The use case internally is having analytics jobs supply a field mapping for multi-field fields. This allows us to use the model "out of the box" on data where we trained on `foo.keyword` but the `_source` only references `foo`.
Currently the AbstractBulkByScrollRequest accepts slice values of 0 via its
`setSlices` method, denoting the "auto" slicing behaviour that is usable by
settting the "slices=auto" parameter on rest requests. When using the High Level
Rest Client, however, we send the 0 value as an integer, which is then rejected
as invalid by `AbstractBulkByScrollRequest#parseSlices`. Instead of making
parsing of the rest request more lenient, this PR opts for changing the
RequestConverter logic in the client to translate 0 values to "auto" on the rest
requests.
Closes#53044
Adds reporting of memory usage for data frame analytics jobs.
This commit introduces a new index pattern `.ml-stats-*` whose
first concrete index will be `.ml-stats-000001`. This index serves
to store instrumentation information for those jobs.
Backport of #52778 and #52958
We mades roles pluggable, but never updated the client to account for
this. This means that when speaking to a modern cluster, application
logs are spammed with warning messages around unrecognized roles. This
commit addresses this by accounting for the fact that roles can extend
beyond master/data/ingest now.
* [ML][Inference] Add support for multi-value leaves to the tree model (#52531)
This adds support for multi-value leaves. This is a prerequisite for multi-class boosted tree classification.
This adds a new configurable field called `indices_options`. This allows users to create or update the indices_options used when a datafeed reads from an index.
This is necessary for the following use cases:
- Reading from frozen indices
- Allowing certain indices in multiple index patterns to not exist yet
These index options are available on datafeed creation and update. Users may specify them as URL parameters or within the configuration object.
closes https://github.com/elastic/elasticsearch/issues/48056
This change adds the recall@k metric and refactors precision@k to match
the new metric.
Recall@k is an important metric to use for learning to rank (LTR)
use-cases. Candidate generation or first ranking phase ranking functions
are often optimized for high recall, in order to generate as many
relevant candidates in the top-k as possible for a second phase of
ranking. Adding this metric allows tuning that base query for LTR.
See: https://github.com/elastic/elasticsearch/issues/51676
Backports: https://github.com/elastic/elasticsearch/pull/52577
Add query execution and return actual results returned from
Elasticsearch inside the tests
(cherry picked from commit 3e039282bf991af87604a6d4f8eada19d5e33842)
* Smarter copying of the rest specs and tests (#52114)
This PR addresses the unnecessary copying of the rest specs and allows
for better semantics for which specs and tests are copied. By default
the rest specs will get copied if the project applies
`elasticsearch.standalone-rest-test` or `esplugin` and the project
has rest tests or you configure the custom extension `restResources`.
This PR also removes the need for dozens of places where the x-pack
specs were copied by supporting copying of the x-pack rest specs too.
The plugin/task introduced here can also copy the rest tests to the
local project through a similar configuration.
The new plugin/task allows a user to minimize the surface area of
which rest specs are copied. Per project can be configured to include
only a subset of the specs (or tests). Configuring a project to only
copy the specs when actually needed should help with build cache hit
rates since we can better define what is actually in use.
However, project level optimizations for build cache hit rates are
not included with this PR.
Also, with this PR you can no longer use the includePackaged flag on
integTest task.
The following items are included in this PR:
* new plugin: `elasticsearch.rest-resources`
* new tasks: CopyRestApiTask and CopyRestTestsTask - performs the copy
* new extension 'restResources'
```
restResources {
restApi {
includeCore 'foo' , 'bar' //will include the core specs that start with foo and bar
includeXpack 'baz' //will include x-pack specs that start with baz
}
restTests {
includeCore 'foo', 'bar' //will include the core tests that start with foo and bar
includeXpack 'baz' //will include the x-pack tests that start with baz
}
}
```
Backport of #52542.
This commit is part of issue #40366 to remove disabled Xlint warnings
from gradle files. In particular, it removes the Xlint exclusions from
the following files:
- benchmarks/build.gradle
- client/client-benchmark-noop-api-plugin/build.gradle
- x-pack/qa/rolling-upgrade/build.gradle
- x-pack/qa/third-party/active-directory/build.gradle
- modules/transport-netty4/build.gradle
For the first three files no code adjustments were needed. For
x-pack/qa/third-party/active-directory move the suppression at the code
level. For transport-netty4 replace the variable arguments with
ArrayLists and remove any redundant casts.
This changes the tree validation code to ensure no node in the tree has a
feature index that is beyond the bounds of the feature_names array.
Specifically this handles the situation where the C++ emits a tree containing
a single node and an empty feature_names list. This is valid tree used to
centre the data in the ensemble but the validation code would reject this
as feature_names is empty. This meant a broken workflow as you cannot GET
the model and PUT it back
The `top_metrics` agg is kind of like `top_hits` but it only works on
doc values so it *should* be faster.
At this point it is fairly limited in that it only supports a single,
numeric sort and a single, numeric metric. And it only fetches the "very
topest" document worth of metric. We plan to support returning a
configurable number of top metrics, requesting more than one metric and
more than one sort. And, eventually, non-numeric sorts and metrics. The
trick is doing those things fairly efficiently.
Co-Authored by: Zachary Tong <zach@elastic.co>
This adds a builder and parsed results for the `string_stats`
aggregation directly to the high level rest client. Without this the
HLRC can't access the `string_stats` API without the elastic licensed
`analytics` module.
While I'm in there this adds a few of our usual unit tests and
modernizes the parsing.
This change adds support for the following new model_size_stats
fields:
- categorized_doc_count
- total_category_count
- frequent_category_count
- rare_category_count
- dead_category_count
- categorization_status
Backport of #51879
This commit changes how RestHandlers are registered with the
RestController so that a RestHandler no longer needs to register itself
with the RestController. Instead the RestHandler interface has new
methods which when called provide information about the routes
(method and path combinations) that are handled by the handler
including any deprecated and/or replaced combinations.
This change also makes the publication of RestHandlers safe since they
no longer publish a reference to themselves within their constructors.
Closes#51622
Co-authored-by: Jason Tedor <jason@tedor.me>
Backport of #51950
in preparation for feature importance and split information gain, adding `number_samples` field to `TreeNode` definition.
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
The main purpose of this commit is to add a single autoscaling REST
endpoint skeleton, for the purpose of starting to build out the build
and testing infrastructure that will surround it. For example, rather
than commiting a fully-functioning autoscaling API, we introduce here
the skeleton so that we can start wiring up the build and testing
infrastructure, establish security roles/permissions, an so on. This
way, in a forthcoming PR that introduces actual functionality, that PR
will be smaller and have less distractions around that sort of
infrastructure.
SecurityIT.testGetUser creates a user for testing purposes, but did
not delete the user at the end of the test. This could leave the
cluster in an unexpected state for other tests.
This commit:
- Deletes the user at the end of `testGetUser`
- Adds the test-name as metadata to the users that are created in `SecurityIT`
so that their origin is clear if they do interfere with other tests
- Enables SecurityDocumentationIT.testGetUsers on the expectation that
the new cleanup step will resolve the unreliability of that test.
Relates: #48440
Co-authored-by: Tim Vernum <tim@adjective.org>
Currently, the same class `FieldCapabilities` is used both to represent the
capabilities for one index, and also the merged capabilities across indices. To
help clarify the logic, this PR proposes to create a separate class
`IndexFieldCapabilities` for the capabilities in one index. The refactor will
also help when adding `source_path` information in #49264, since the merged
source path field will have a different structure from the field for a single index.
Individual changes:
* Add a new class IndexFieldCapabilities.
* Remove extra constructor from FieldCapabilities.
* Combine the add and merge methods in FieldCapabilities.Builder.
While we use `== false` as a more visible form of boolean negation
(instead of `!`), the true case is implied and the true value does not
need to explicitly checked. This commit converts cases that have slipped
into the code checking for `== true`.
* Rename ILM history index enablement setting
The previous setting was `index.lifecycle.history_index_enabled`, this commit changes it to
`indices.lifecycle.history_index_enabled` to indicate this is not an index-level setting (it's node
level).
* [ML][Inference] Fix weighted mode definition (#51648)
Weighted mode inaccurately assumed that the "max value" of the input values would be the maximum class value. This does not make sense.
Weighted Mode should know how many classes there are. Hence the new parameter `num_classes`. This indicates what the maximum class value to be expected.
The audit index is re-created for every testrun and therefore potential useful debug information
gets lost. This change reads out the audit index and logs the results, which makes them available
for debugging CI issues.
relates #51549
This commit creates a new index privilege named `maintenance`.
The privilege grants the following actions: `refresh`, `flush` (also synced-`flush`),
and `force-merge`. Previously the actions were only under the `manage` privilege
which in some situations was too permissive.
Co-authored-by: Amir H Movahed <arhd83@gmail.com>
This commit adds examples in our documentation for
- An HLRC instance authenticating to an elasticsearch cluster using
an elasticsearch token service access token or an API key
- An HLRC instance connecting to an elasticsearch cluster that is
setup for TLS on the HTTP layer when the CA certificate of the
cluster is available either as a PEM file or a keystore
- An HLRC instance connecting to an elasticsearch cluster that
requires client authentication where the client key and certificate
are available in a keystore
Co-Authored-By: Lisa Cawley <lcawley@elastic.co>
This change changes the way to run our test suites in
JVMs configured in FIPS 140 approved mode. It does so by:
- Configuring any given runtime Java in FIPS mode with the bundled
policy and security properties files, setting the system
properties java.security.properties and java.security.policy
with the == operator that overrides the default JVM properties
and policy.
- When runtime java is 11 and higher, using BouncyCastle FIPS
Cryptographic provider and BCJSSE in FIPS mode. These are
used as testRuntime dependencies for unit
tests and internal clusters, and copied (relevant jars)
explicitly to the lib directory for testclusters used in REST tests
- When runtime java is 8, using BouncyCastle FIPS
Cryptographic provider and SunJSSE in FIPS mode.
Running the tests in FIPS 140 approved mode doesn't require an
additional configuration either in CI workers or locally and is
controlled by specifying -Dtests.fips.enabled=true
* [ML][Inference] add tags url param to GET (#51330)
Adds a new URL parameter, `tags` to the GET _ml/inference/<model_id> endpoint.
This parameter allows the list of models to be further reduced to those who contain all the provided tags.
This change adds a new `kibana_admin` role, and deprecates
the old `kibana_user` and`kibana_dashboard_only_user`roles.
The deprecation is implemented via a new reserved metadata
attribute, which can be consumed from the API and also triggers
deprecation logging when used (by a user authenticating to
Elasticsearch).
Some docs have been updated to avoid references to these
deprecated roles.
Backport of: #46456
Co-authored-by: Larry Gregory <lgregorydev@gmail.com>
* [ML][Inference] Adding classification_weights to ensemble models
classification_weights are a way to allow models to
prefer specific classification results over others
this might be advantageous if classification value
probabilities are a known quantity and can improve
model error rates.
Adds a new parameter to regression and classification that enables computation
of importance for the top most important features. The computation of the importance
is based on SHAP (SHapley Additive exPlanations) method.
Backport of #50914
This commit improves the performance of warning value extraction in the
low-level REST client, and is similar to the approach taken in
#24114. There are some differences since the low-level REST client might
be connected to Elasticsearch through a proxy that injects its own
warnings.
* [ML][Inference] PUT API (#50852)
This adds the `PUT` API for creating trained models that support our format.
This includes
* HLRC change for the API
* API creation
* Validations of model format and call
* fixing backport
Since 6.0, the 'template' field has been deprecated in put template requests in
favour of index_patterns. Previously, the PutIndexTemplateRequest would accept
the 'template' field in its 'source' methods and silently convert it to
'index_patterns'. This meant that users specifying 'template' in the source
would not receive a deprecation warning from the server.
This PR makes a small change to no longer silently convert 'template' to
'index_patterns', which ensures that users receive a deprecation warning.
Follow-up to #49460.
Replaces the "funny"
`Function<String, ConstructingObjectParser<T, Void>>` with a much
simpler `ConstructingObjectParser<T, String>`. This makes pretty much
all of our object parsers static.
This adds the necessary named XContent classes to the HLRC for the lang ident model. This is so the HLRC can call `GET _ml/inference/lang_ident_model_1?include_definition=true` without XContent parsing errors.
The constructors are package private as since this classes are used exclusively within the pre-packaged model (and require the specific weights, etc. to be of any use).
If a pipeline referenced by a transform does not exist, we should not allow the transform to be created.
We do allow the pipeline existence check to be skipped with defer_validations, but if the pipeline still does not exist on `_start`, the pipeline will fail to start.
relates: #50135
This PR adds per-field metadata that can be set in the mappings and is later
returned by the field capabilities API. This metadata is completely opaque to
Elasticsearch but may be used by tools that index data in Elasticsearch to
communicate metadata about fields with tools that then search this data. A
typical example that has been requested in the past is the ability to attach
a unit to a numeric field.
In order to not bloat the cluster state, Elasticsearch requires that this
metadata be small:
- keys can't be longer than 20 chars,
- values can only be numbers or strings of no more than 50 chars - no inner
arrays or objects,
- the metadata can't have more than 5 keys in total.
Given that metadata is opaque to Elasticsearch, field capabilities don't try to
do anything smart when merging metadata about multiple indices, the union of
all field metadatas is returned.
Here is how the meta might look like in mappings:
```json
{
"properties": {
"latency": {
"type": "long",
"meta": {
"unit": "ms"
}
}
}
}
```
And then in the field capabilities response:
```json
{
"latency": {
"long": {
"searchable": true,
"aggreggatable": true,
"meta": {
"unit": [ "ms" ]
}
}
}
}
```
When there are no conflicts, values are arrays of size 1, but when there are
conflicts, Elasticsearch includes all unique values in this array, without
giving ways to know which index has which metadata value:
```json
{
"latency": {
"long": {
"searchable": true,
"aggreggatable": true,
"meta": {
"unit": [ "ms", "ns" ]
}
}
}
}
```
Closes#33267
We have about 800 `ObjectParsers` in Elasticsearch, about 700 of which
are final. This is *probably* the right way to declare them because in
practice we never mutate them after they are built. And we certainly
don't change the static reference. Anyway, this adds `final` to these
parsers.
I found the non-final parsers with this:
```
diff \
<(find . -type f -name '*.java' -exec grep -iHe 'static.*PARSER\s*=' {} \+ | sort) \
<(find . -type f -name '*.java' -exec grep -iHe 'static.*final.*PARSER\s*=' {} \+ | sort) \
2>&1 | grep '^<'
```
Adds a `force` parameter to the delete data frame analytics
request. When `force` is `true`, the action force-stops the
jobs and then proceeds to the deletion. This can be used in
order to delete a non-stopped job with a single request.
Closes#48124
Backport of #50553
We have about 800 `ObjectParsers` in Elasticsearch, about 700 of which
are final. This is *probably* the right way to declare them because in
practice we never mutate them after they are built. And we certainly
don't change the static reference. Anyway, this adds `final` to a bunch
of these parsers, mostly the ones in xpack and their "paired" parsers in
the high level rest client. I picked these just to have somewhere to
break the up the change so it wouldn't be huge.
I found the non-final parsers with this:
```
diff \
<(find . -type f -name '*.java' -exec grep -iHe 'static.*PARSER\s*=' {} \+ | sort) \
<(find . -type f -name '*.java' -exec grep -iHe 'static.*final.*PARSER\s*=' {} \+ | sort) \
2>&1 | grep '^<'
```
The additional change to the original PR (#49657), is that `org.elasticsearch.client.cluster.RemoteConnectionInfo` now parses the initial_connect_timeout field as a string instead of a TimeValue instance.
The reason that this is needed is because that the initial_connect_timeout field in the remote connection api is serialized for human consumption, but not for parsing purposes.
Therefore the HLRC can't parse it correctly (which caused test failures in CI, but not in the PR CI
:( ). The way this field is serialized needs to be changed in the remote connection api, but that is a breaking change. We should wait making this change until rest api versioning is introduced.
Co-Authored-By: j-bean <anton.shuvaev91@gmail.com>
Co-authored-by: j-bean <anton.shuvaev91@gmail.com>
* Add ILM histore store index (#50287)
* Add ILM histore store index
This commit adds an ILM history store that tracks the lifecycle
execution state as an index progresses through its ILM policy. ILM
history documents store output similar to what the ILM explain API
returns.
An example document with ALL fields (not all documents will have all
fields) would look like:
```json
{
"@timestamp": 1203012389,
"policy": "my-ilm-policy",
"index": "index-2019.1.1-000023",
"index_age":123120,
"success": true,
"state": {
"phase": "warm",
"action": "allocate",
"step": "ERROR",
"failed_step": "update-settings",
"is_auto-retryable_error": true,
"creation_date": 12389012039,
"phase_time": 12908389120,
"action_time": 1283901209,
"step_time": 123904107140,
"phase_definition": "{\"policy\":\"ilm-history-ilm-policy\",\"phase_definition\":{\"min_age\":\"0ms\",\"actions\":{\"rollover\":{\"max_size\":\"50gb\",\"max_age\":\"30d\"}}},\"version\":1,\"modified_date_in_millis\":1576517253463}",
"step_info": "{... etc step info here as json ...}"
},
"error_details": "java.lang.RuntimeException: etc\n\tcaused by:etc etc etc full stacktrace"
}
```
These documents go into the `ilm-history-1-00000N` index to provide an
audit trail of the operations ILM has performed.
This history storage is enabled by default but can be disabled by setting
`index.lifecycle.history_index_enabled` to `false.`
Resolves#49180
* Make ILMHistoryStore.putAsync truly async (#50403)
This moves the `putAsync` method in `ILMHistoryStore` never to block.
Previously due to the way that the `BulkProcessor` works, it was possible
for `BulkProcessor#add` to block executing a bulk request. This was bad
as we may be adding things to the history store in cluster state update
threads.
This also moves the index creation to be done prior to the bulk request
execution, rather than being checked every time an operation was added
to the queue. This lessens the chance of the index being created, then
deleted (by some external force), and then recreated via a bulk indexing
request.
Resolves#50353
* Update remote cluster stats to support simple mode (#49961)
Remote cluster stats API currently only returns useful information if
the strategy in use is the SNIFF mode. This PR modifies the API to
provide relevant information if the user is in the SIMPLE mode. This
information is the configured addresses, max socket connections, and
open socket connections.
* Send hostname in SNI header in simple remote mode (#50247)
Currently an intermediate proxy must route conncctions to the
appropriate remote cluster when using simple mode. This commit offers
a additional mechanism for the proxy to route the connections by
including the hostname in the TLS SNI header.
* Rename the remote connection mode simple to proxy (#50291)
This commit renames the simple connection mode to the proxy connection
mode for remote cluster connections. In order to do this, the mode specific
settings which we namespaced by their mode (ex: sniff.seed and
proxy.addresses) have been reverted.
* Modify proxy mode to support a single address (#50391)
Currently, the remote proxy connection mode uses a list setting for the
proxy address. This commit modifies this so that the setting is
proxy_address and only supports a single remote proxy address.
The "code_user" and "code_admin" reserved roles existed to support
code search which is no longer included in Kibana.
The "kibana_system" role included privileges to read/write from the
code search indices, but no longer needs that access.
Backport of: #50068
This adds a new `randomize_seed` for regression and classification.
When not explicitly set, the seed is randomly generated. One can
reuse the seed in a similar job in order to ensure the same docs
are picked for training.
Backport of #49990
Adds `GET /_script_language` to support Kibana dynamic scripting
language selection.
Response contains whether `inline` and/or `stored` scripts are
enabled as determined by the `script.allowed_types` settings.
For each scripting language registered, such as `painless`,
`expression`, `mustache` or custom, available contexts for the language
are included as determined by the `script.allowed_contexts` setting.
Response format:
```
{
"types_allowed": [
"inline",
"stored"
],
"language_contexts": [
{
"language": "expression",
"contexts": [
"aggregation_selector",
"aggs"
...
]
},
{
"language": "painless",
"contexts": [
"aggregation_selector",
"aggs",
"aggs_combine",
...
]
}
...
]
}
```
Fixes: #49463
**Backport**
Reindex sort never gave a guarantee about the order of documents being
indexed into the destination, though it could give a sense of locality
of source data.
It prevents us from doing resilient reindex and other optimizations and
it has therefore been deprecated.
Related to #47567
Reindex sort never gave a guarantee about the order of documents being
indexed into the destination, though it could give a sense of locality
of source data.
It prevents us from doing resilient reindex and other optimizations and
it has therefore been deprecated.
Related to #47567
This adds a `_source` setting under the `source` setting of a data
frame analytics config. The new `_source` is reusing the structure
of a `FetchSourceContext` like `analyzed_fields` does. Specifying
includes and excludes for source allows selecting which fields
will get reindexed and will be available in the destination index.
Closes#49531
Backport of #49690
This change adds a dynamic cluster setting named `indices.id_field_data.enabled`.
When set to `false` any attempt to load the fielddata for the `_id` field will fail
with an exception. The default value in this change is set to `false` in order to prevent
fielddata usage on this field for future versions but it will be set to `true` when backporting
to 7x. When the setting is set to true (manually or by default in 7x) the loading will also issue
a deprecation warning since we want to disallow fielddata entirely when https://github.com/elastic/elasticsearch/issues/26472
is implemented.
Closes#43599
This commit back ports three commits related to enabling the simple
connection strategy.
Allow simple connection strategy to be configured (#49066)
Currently the simple connection strategy only exists in the code. It
cannot be configured. This commit moves in the direction of allowing it
to be configured. It introduces settings for the addresses and socket
count. Additionally it introduces new settings for the sniff strategy
so that the more generic number of connections and seed node settings
can be deprecated.
The simple settings are not yet registered as the registration is
dependent on follow-up work to validate the settings.
Ensure at least 1 seed configured in remote test (#49389)
This fixes#49384. Currently when we select a random subset of seed
nodes from a list, it is possible for 0 seeds to be selected. This test
depends on at least 1 seed being selected.
Add the simple strategy to cluster settings (#49414)
This is related to #49067. This commit adds the simple connection
strategy settings and strategy mode setting to the cluster settings
registry. With these changes, the simple connection mode can be used.
Additionally, it adds validation to ensure that settings cannot be
misconfigured.
This commit replaces the _estimate_memory_usage API with
a new API, the _explain API.
The API consolidates information that is useful before
creating a data frame analytics job.
It includes:
- memory estimation
- field selection explanation
Memory estimation is moved here from what was previously
calculated in the _estimate_memory_usage API.
Field selection is a new feature that explains to the user
whether each available field was selected to be included or
not in the analysis. In the case it was not included, it also
explains the reason why.
Backport of #49455
This commit adds a deprecation warning when starting
a node where either of the server contexts
(xpack.security.transport.ssl and xpack.security.http.ssl)
meet either of these conditions:
1. The server lacks a certificate/key pair (i.e. neither
ssl.keystore.path not ssl.certificate are configured)
2. The server has some ssl configuration, but ssl.enabled is not
specified. This new validation does not care whether ssl.enabled is
true or false (though other validation might), it simply makes it
an error to configure server SSL without being explicit about
whether to enable that configuration.
Backport of: #45892
* [ML] ML Model Inference Ingest Processor (#49052)
* [ML][Inference] adds lazy model loader and inference (#47410)
This adds a couple of things:
- A model loader service that is accessible via transport calls. This service will load in models and cache them. They will stay loaded until a processor no longer references them
- A Model class and its first sub-class LocalModel. Used to cache model information and run inference.
- Transport action and handler for requests to infer against a local model
Related Feature PRs:
* [ML][Inference] Adjust inference configuration option API (#47812)
* [ML][Inference] adds logistic_regression output aggregator (#48075)
* [ML][Inference] Adding read/del trained models (#47882)
* [ML][Inference] Adding inference ingest processor (#47859)
* [ML][Inference] fixing classification inference for ensemble (#48463)
* [ML][Inference] Adding model memory estimations (#48323)
* [ML][Inference] adding more options to inference processor (#48545)
* [ML][Inference] handle string values better in feature extraction (#48584)
* [ML][Inference] Adding _stats endpoint for inference (#48492)
* [ML][Inference] add inference processors and trained models to usage (#47869)
* [ML][Inference] add new flag for optionally including model definition (#48718)
* [ML][Inference] adding license checks (#49056)
* [ML][Inference] Adding memory and compute estimates to inference (#48955)
* fixing version of indexed docs for model inference
Backport of #48849. Update `.editorconfig` to make the Java settings the
default for all files, and then apply a 2-space indent to all `*.gradle`
files. Then reformat all the files.
* [ML] Add new geo_results.(actual_point|typical_point) fields for `lat_long` results (#47050)
[ML] Add new geo_results.(actual_point|typical_point) fields for `lat_long` results (#47050)
Related PR: https://github.com/elastic/ml-cpp/pull/809
* adjusting bwc version
This commit finishes cleaning up the AbstractHlrcXContentTestCase work
and removes this class. All classes that were using this are now using
the updated base class.
Ref #39745
The old graph tests were duplicated a lot and used a deprecated parent
class. This commit cleans that up and removes one of the duplicated
tests.
Ref #39745
* [ML][Inference] separating definition and config object storage (#48651)
This separates out the `definition` object from being stored within the configuration object in the index.
This allows us to gather the config object without decompressing a potentially large definition.
Additionally, `input` is moved to the TrainedModelConfig object and out of the definition. This is so the trained input fields are accessible outside the potentially large model definition.
Adding support for the `search_type` request parameter to the Ranking Evaluation
API since this parameter can impact the ranking and the metric score and should
be choosen in the same way when evaluating the search as later in the real
search.
Closes#48503
Backport of #48447. Make a number of changes so that code in the
`client` directory is more resilient to automatic formatting. This
covers:
* Literal JSON handling:
* Reformatting multiline JSON to embed whitespace in the strings
* Remove string concatenation where JSON fits on a single line
* Use `String.format` for large documents with variable content
* Remove some erroneous doc refs in `QueryDSLDocumentationTests`
* Move some comments around to they aren't auto-formatted to a strange
place
This commit simplifies and standardizes our usage of the Gradle Shadow
plugin to conform more to plugin conventions. The custom "bundle" plugin
has been removed as it's not necessary and performs the same function
as the Shadow plugin's default behavior with existing configurations.
Additionally, this removes unnecessary creation of a "nodeps" artifact,
which is unnecessary because by default project dependencies will in
fact use the non-shadowed JAR unless explicitly depending on the
"shadow" configuration.
Finally, we've cleaned up the logic used for unit testing, so we are
now correctly testing against the shadow JAR when the plugin is applied.
This better represents a real-world scenario for consumers and provides
better test coverage for incorrectly declared dependencies.
(cherry picked from commit 3698131109c7e78bdd3a3340707e1c7b4740d310)
Due to a bug, GETing a snapshot can cause a RespositoryException to be
thrown. This error is transient and should be retried, rather than
causing the test to fail. This commit converts those
RepositoryExceptions into AssertionErrors so that they will be retried
in code wrapped in assertBusy.
BytesReference is currently an abstract class which is extended by
various implementations. This makes it very difficult to use the
delegation pattern. The implication of this is that our releasable
BytesReference is a PagedBytesReference type and cannot be used as a
generic releasable bytes reference that delegates to any reference type.
This commit makes BytesReference an interface and introduces an
AbstractBytesReference for common functionality.
The AbstractHlrcWriteableXContentTestCase was replaced by a better test
case a while ago, and this is the last two instances using it. They have
been converted and the test is now deleted.
Ref #39745
This commit removes the randomization used by every execute call in the
high level rest tests. Previously every execute call, which can be many
calls per single test, would rely on a random boolean to determine if
they should use the sync or async methods provided to the execute
method. This commit runs the tests twice, using two different clusters,
both of them providing the value one time via a sysprop. This ensures
that the whole suite of tests is run using the sync and async code
paths.
Closes#39667
All internal searches (triggered by APIs) across the .security index
must be performed while "under the security origin". Otherwise,
the search is performed in the context of the caller which most
likely does not have privileges to search .security (hopefully).
This commit fixes this in the case of two methods in the
TokenService and corrects an overly done such context switch
in the ApiKeyService.
In addition, this makes all tests from the client/rest-high-level
module execute as an all mighty administrator,
but not a literal superuser.
Closes#47151
Several links from the ILM HLRC Javadoc to the online documentation were
not updated when the ILM HLRC documentation was written. This commit
fixes those links.
Adds `GET /_script_context`, returning a `contexts` object with each
available context as a key whose value is an empty object. eg.
```
{
"contexts": {
"aggregation_selector": {},
"aggs": {},
"aggs_combine": {},
...
}
}
```
refs: #47411
This adds parsing an inference model as a possible
result of the analytics process. When we do parse such a model
we persist a `TrainedModelConfig` into the inference index
that contains additional metadata derived from the running job.
which is backport merge and adds a new ingest processor, named enrich processor,
that allows document being ingested to be enriched with data from other indices.
Besides a new enrich processor, this PR adds several APIs to manage an enrich policy.
An enrich policy is in charge of making the data from other indices available to the enrich processor in an efficient manner.
Related to #32789
This change adds:
- A new option, allow_lazy_open, to anomaly detection jobs
- A new option, allow_lazy_start, to data frame analytics jobs
Both work in the same way: they allow a job to be
opened/started even if no ML node exists that can
accommodate the job immediately. In this situation
the job waits in the opening/starting state until ML
node capacity is available. (The starting state for data
frame analytics jobs is new in this change.)
Additionally, the ML nightly maintenance tasks now
creates audit warnings for ML jobs that are unassigned.
This means that jobs that cannot be assigned to an ML
node for a very long time will show a yellow warning
triangle in the UI.
A final change is that it is now possible to close a job
that is not assigned to a node without using force.
This is because previously jobs that were open but
not assigned to a node were an aberration, whereas
after this change they'll be relatively common.
This commit adds HLRC support and documentation for the SLM Start and
Stop APIs, as well as updating existing documentation where appropriate.
This commit also ensures that the SLM APIs are properly included in the
HLRC documentation.
Elastic cloud has a concept of a cloud Id. This Id is a base64 encoded
url, split up into a few parts. This commit allows the user to pass in a
cloud id now, which is translated to a HttpHost that is defined by the
encoded parts therein.
Adds a new datafeed config option, max_empty_searches,
that tells a datafeed that has never found any data to stop
itself and close its associated job after a certain number
of real-time searches have returned no data.
Backport of #47922
This commit adds two APIs that allow to pause and resume
CCR auto-follower patterns:
// pause auto-follower
POST /_ccr/auto_follow/my_pattern/pause
// resume auto-follower
POST /_ccr/auto_follow/my_pattern/resume
The ability to pause and resume auto-follow patterns can be
useful in some situations, including the rolling upgrades of
cluster using a bi-directional cross-cluster replication scheme
(see #46665).
This commit adds a new active flag to the AutoFollowPattern
and adapts the AutoCoordinator and AutoFollower classes so
that it stops to fetch remote's cluster state when all auto-follow
patterns associate to the remote cluster are paused.
When an auto-follower is paused, remote indices that match the
pattern are just ignored: they are not added to the pattern's
followed indices uids list that is maintained in the local cluster
state. This way, when the auto-follow pattern is resumed the
indices created in the remote cluster in the meantime will be
picked up again and added as new following indices. Indices
created and then deleted in the remote cluster will be ignored
as they won't be seen at all by the auto-follower pattern at
resume time.
Backport of #47510 for 7.x
Currently there are two issues with serializing BulkByScrollResponse.
First, when deserializing from XContent, indexing exceptions and search
exceptions are switched. Additionally, search exceptions do no retain
the appropriate RestStatus code, so you must evaluate the status code
from the exception. However, the exception class is not always correctly
retained when serialized.
This commit adds tests in the failure case. Additionally, fixes the
swapping of failure types and adds the rest status code to the search
failure.
Adds the following parameters to `outlier_detection`:
- `compute_feature_influence` (boolean): whether to compute or not
feature influence scores
- `outlier_fraction` (double): the proportion of the data set assumed
to be outlying prior to running outlier detection
- `standardization_enabled` (boolean): whether to apply standardization
to the feature values
Backport of #47600
Use case:
User with `create_doc` index privilege will be allowed to only index new documents
either via Index API or Bulk API.
There are two cases that we need to think:
- **User indexing a new document without specifying an Id.**
For this ES auto generates an Id and now ES version 7.5.0 onwards defaults to `op_type` `create` we just need to authorize on the `op_type`.
- **User indexing a new document with an Id.**
This is problematic as we do not know whether a document with Id exists or not.
If the `op_type` is `create` then we can assume the user is trying to add a document, if it exists it is going to throw an error from the index engine.
Given these both cases, we can safely authorize based on the `op_type` value. If the value is `create` then the user with `create_doc` privilege is authorized to index new documents.
In the `AuthorizationService` when authorizing a bulk request, we check the implied action.
This code changes that to append the `:op_type/index` or `:op_type/create`
to indicate the implied index action.
This commit adds support to retrieve all API keys if the authenticated
user is authorized to do so.
This removes the restriction of specifying one of the
parameters (like id, name, username and/or realm name)
when the `owner` is set to `false`.
Closes#46887
* Remove eclipse conditionals
We used to have some meta projects with a `-test` prefix because
historically eclipse could not distinguish between test and main
source-sets and could only use a single classpath.
This is no longer the case for the past few Eclipse versions.
This PR adds the necessary configuration to correctly categorize source
folders and libraries.
With this change eclipse can import projects, and the visibility rules
are correct e.x. auto compete doesn't offer classes from test code or
`testCompile` dependencies when editing classes in `main`.
Unfortunately the cyclic dependency detection in Eclipse doesn't seem to
take the difference between test and non test source sets into account,
but since we are checking this in Gradle anyhow, it's safe to set to
`warning` in the settings. Unfortunately there is no setting to ignore
it.
This might cause problems when building since Eclipse will probably not
know the right order to build things in so more wirk might be necesarry.
* Add API to execute SLM retention on-demand (#47405)
This is a backport of #47405
This commit adds the `/_slm/_execute_retention` API endpoint. This
endpoint kicks off SLM retention and then returns immediately.
This in particular allows us to run retention without scheduling it
(for entirely manual invocation) or perform a one-off cleanup.
This commit also includes HLRC for the new API, and fixes an issue
in SLMSnapshotBlockingIntegTests where retention invoked prior to the
test completing could resurrect an index the internal test cluster
cleanup had already deleted.
Resolves#46508
Relates to #43663
Benjamin Trent
Mayya Sharipova
Jason Tedor
Dimitris Athanasiou
Nik Everett
Christoph Büscher
Lee Hinman
Hendrik Muhs
Gordon Brown
Armin Braun
Luca Cavanna
David Roberts
Tim Brooks
Przemysław Witek
Jim Ferenczi
Martijn van Groningen
Alan Woodward
Ryan Ernst
David Kyle
Mark Vieira
Tom Veasey
Aleksandr Maus
Costin Leau
Dan Hermann
Josh Devins
Jake Landis
Sachin Frayne
Przemko Robakowski
Igor Motov
Maria Ralli
Jay Modi
Ioannis Kakavas
Julie Tibshirani
James Rodewig
Albert Zaharovits
Nhat Nguyen
Tim Vernum
Darren Foong
Adrien Grand
James Baiera
Stuart Tettemer
Henning Andersen
Henning Andersen
jesinity
Rory Hunter
Michael Basnight
David Turner
Tanguy Leroux
Albert Zaharovits
Yogesh Gaikwad
Alpar Torok