We initially added `requireDocker` for a way for tasks to say that they
absolutely must have it, like the build docker image tasks.
Projects using the test fixtures plugin are not in this both, as the
intent with these is that they will be skipped if docker and docker-compose
is not available.
Before this change we were lenient, the docker image build would succeed
but produce nothing. The implementation was also confusing as it was not
immediately obvious this was the case due to all the indirection in the
code.
The reason we have this leniency is that when we added the docker image
build, docker was a fairly new requirement for us, and we didn't have
it deployed in CI widely enough nor had CI configured to prefer workers
with docker when possible. We are in a much better position now.
The other reason was other stack teams running `./gradlew assemble`
in their respective CI and the possibility of breaking them if docker is
not installed. We have been advocating for building specific distros for
some time now and I will also send out an additional notice
The PR also removes the use of `requireDocker` from tests that actually
use test fixtures and are ok without it, and fixes a bug in test
fixtures that would cause incorrect configuration and allow some tasks
to run when docker was not available and they shouldn't have.
Closes #42680 and #42829 see also #42719
Enable audit logs in docker by creating console appenders for audit loggers.
also rename field @timestamp to timestamp and add field type with value audit
The docker build contains now two log4j configuration for oss or default versions. The build now allows override the default configuration.
Also changed the format of a timestamp from ISO8601 to include time zone as per this discussion #36833 (comment)
closes#42666
backport#42671
Before this change we would recurse to cache bwc versions.
This proved to be problematic due to the number of steps it was
generating taking too long.
Also this required tricky maintenance to break the recursion for old
branches we don't really care about.
With this change we now cache specific branches only.
Previously we used LoggedExec for running the internal bwc builds.
However, this had bad performance implications as all the output was
buffered into memory, thus we changed back to normal Exec. This commit
adds a `spoolOutput` setting to LoggedExec which can be used for
commands with large amounts of output, and switches the bwc builds to
use this flag.
The elasticsearch-cli helper script does not use the tempdir created by
elasticsearch-env, yet the env script still creates it. This can lead to
lots of temp directories being created when running cli scripts in an
automated fashion. This commit passes a fake tmpdir to the env script to
avoid creation.
closes#34445
This commit adds deletion of the bin directory to postrm cleanup. While
the package's bin files are cleaned up by the package manager, plugins
may have created subdirectories under bin. We already cleanup plugins,
but not the extra bin dirs their installation created.
closes#18109
Java 8 presents the JVM options slightly differently when displaying via
-XX:+PrintFlagsFinal. This commit adapts the JVM options parser for this
possibility.
Relates #42009
This commit removes manual parsing of JVM options when calculating
ergonomics. This is to avoid a situation that we parse values
differently than the JVM would. In fact, we already have a bug along
these lines today. It is possible to start the JVM with the same flag
multiple times on the command line. In this case, the last value
wins. For example, -Xmx1g -Xmx2g would start the JVM with a heap size of
two gigabytes. Our JVM ergonomics ignores this possibility and instead
the first value is winning!
Our strategy to avoid manual parsing of the JVM options is to start the
Java command line parser (without actually starting a JVM) by invoking
java with the same command line flags as presented and request that the
JVM tell us what values it would start with. This ensures that we have
the correct values when making ergonomic decisions.
Moreover, our strategy also is ignoring ES_JAVA_OPTS which could
override the heap size as well leading to incorrect ergonomic
choices. This commit address this issue too.
The deb package has been updated several times in the past to contain
overrides in order to pass lintian inspection. However, there have never
been any tests to ensure we do not fallback to failure. This commit
updates the overrides file given things that have changed since 2.x like
adding ML and bundling the jdk.
closes#17185
We currently download 3 variants of the same version of the jdk for
bundling into the distributions. Additionally, the vagrant images do
their own downloading. This commit moves the jdk downloading into a
utility gradle plugin. This will be used in a future PR by the packaging
tests.
The new plugin exposes a "jdks" project extension which allows creating
named jdks. Once the jdk version and platform are set for a named jdk,
the jdk object may be used as a lazy String for the jdk home path, or a
file collection for copying.
testclusters detect from settings that security is enabled
if a user is not specified using the DSL introduced in this PR, a default one is created
the appropriate wait conditions are used authenticating with the first user defined in the DSL ( or the default user ).
an example DSL to create a user is user username:"test_user" password:"x-pack-test-password" role: "superuser" all keys are optional and default to the values shown in this example
We have faked some Ivy repositories on a few artifact locations. Today
when Gradle attempts to resolve these artifacts, it follows its default
strategy to search for Gradle metadata, then Maven POM files, then Ivy
descriptors, and finally will fallback to looking directly for the
artifact. This wastes times on remote network calls that will 404 anyway
since these metadata resources will not exist for these fake Ivy
repositories. This commit overrides the Gradle strategy to look directly
for artifacts.
When Elasticsearch is run from a package installation, the running
process does not have permissions to write to the keystore. This is
because of the root:root ownership of /etc/elasticsearch. This is why we
create the keystore if it does not exist during package installation. If
the keystore needs to be upgraded, that is currently done by the running
Elasticsearch process. Yet, as just mentioned, the Elasticsearch process
would not have permissions to do that during runtime. Instead, this
needs to be done during package upgrade. This commit adds an upgrade
command to the keystore CLI for this purpose, and that is invoked during
package upgrade if the keystore already exists. This ensures that we are
always on the latest keystore format before the Elasticsearch process is
invoked, and therefore no upgrade would be needed then. While this bug
has always existed, we have not heard of reports of it in practice. Yet,
this bug becomes a lot more likely with a recent change to the format of
the keystore to remove the distinction between file and string entries.
We use Bouncy Castle to verify signatures when installing official
plugins. This leads to illegal access warnings because Bouncy Castle
accesses the Sun security provider constructor. This commit adds an
add-opens flag to suppress this illegal access.
This commit bumps the bundled JDK to version 12.0.1. Note that we had to
add a new pattern here as Oracle has changed the source of the
builds. This commit will be backported to 6.7 in a different form to
bump the bundled JDK in the Docker images too.
We had been obtaining JDK distributions from download.java.net. This
site is now presenting a certificate that does not list
download.java.net as a SAN. Therefore with host verification, the build
can not use this site. This commit switches to using download.oracle.com
which appears to be an alternative name for the same CNAME
download.oracle.com.edgekey.net. This allows our builds to resume.
hamcrest has some improvements in newer versions, like FileMatchers
that make assertions regarding file exists cleaner. This commit upgrades
to the latest version of hamcrest so we can start using new and improved
matchers.
The pid dir for both systemd and init.d is already managed by those
respective systems (tmpfiles.d and the init script, respectively). Since
the /var/run dir is often mounted as tmpfs, it does not make sense to
have the elasticsearch pid dir added by the package installation. This
commit removes that empty dir from deb and rpm.
This commit adds a filter to the files include from modules to only
include platform specific files relevant to the distribution being
built. For example, the deb files on linux would now only include linux
ML binaries, and not windows or macos files.
* fix the packer cache script
This PR disabled the explicit pull since it seems this always tries to
work with a registry.
Functionality will not be affected since we will still build the images
on pull.
Instead of allowing docker-compose to rebuild it.
With this change we tag the image with a test label, and use that
in the testing as this is simpler that dealing with a dynamically
generated docker-compose file.
This commit changes the bwc builds from a single task for a branch to a
task for each bwc artifact. This reduces the bwc build time when only
needing a specific artifact, for example when running cluster restart
tests on a mac, the windows artifacts or rpm/debs are not needed.
This commit fixes an issue when the artifact used to build the Docker
image is sourced from artifacts.elastic.co. In particular, the artifact
was not downloaded to the proper location.
* Replace usages RandomizedTestingTask with built-in Gradle Test (#40978)
This commit replaces the existing RandomizedTestingTask and supporting code with Gradle's built-in JUnit support via the Test task type. Additionally, the previous workaround to disable all tasks named "test" and create new unit testing tasks named "unitTest" has been removed such that the "test" task now runs unit tests as per the normal Gradle Java plugin conventions.
(cherry picked from commit 323f312bbc829a63056a79ebe45adced5099f6e6)
* Fix forking JVM runner
* Don't bump shadow plugin version
We previously found a bug in the JVM where AVX-512 instructions could
crash the JVM to crash with a segmentation fault. This bug impacted JDK
9 and JDK 10, but was most prominent on JDK 10 because AVX-512 was
enabled there by default. In JDK 11, this bug is reported fixed so this
commit restricts the disabling of AVX-512 to JDK 10 only. Since we no
longer support JDK 10 for any versions that this commit will be
integrated into (7.1, 8.0), we simply remove the disabling of this flag
from the JVM options.
This commit deprecates versions of Java prior to Java 11. This commit
will cause a warning to be printed to standard error when any command
line tool is invoked, or when Elasticsearch is started. Additionally, we
log a deprecation message when Elasticsearch is started.
* Add notice for bundled jdk
This commit adds the license/notice for the bundled openjdk.
* First draft
* iteration
* Fix package notices
* Iteration
* One more iteration
While yum does retry retrieving files 10 times by default [1], slow
network fetches, governed by `minrate` cause immediate aborts without
getting retried.
Wrap yum commands in a 10 iteration retry loop.
[1] http://man7.org/linux/man-pages/man5/yum.conf.5.html
Backport of #40349
On windows, JAVA_HOME is currently resolved when the windows service is started. However, this is contrary to what our documentation states. This commit moves resolution to service install. This has the side effect of making java existence checking optional in elasticsearch-env.bat, since the rest of the service commands do not require java.
closes#30720
This change removes the use of hardcoded port values for the
idp-fixture in favor of the mapped ephemeral ports. This should prevent
failures due to port conflicts in CI.
* Revert "Configure TMP for test nodes on Windows (#39959)"
This reverts commit 97562a874fcb1f29fb05272ab860a0307e97d1aa.
* Configure a tmp dir without spaces
* Pass on TMP instead of changing it
Now that we have the bundled JDK in the Docker images, we should use
them as opposed to procuring a JDK ourselves. This commit replaces the
JDK in the Docker image with the bundled JDK.
This commit adds cd $ES_HOME to elasticsearch-env and removes it from
elasticsearch. This way, both elasticsearch and elasticsearch-cli are
executed with the working directory set to $ES_HOME. The need for the
fix arose from the following bug:
1. Explicitly set path.data to relative to ES_HOME path in
elasticsearch.yml.
2. Run elasticsearch from any directory. Elasticsearch is able to
correctly start.
3. Stop elasticsearch.
4. Run elasticsearch-node unsafe-bootstrap, not from ES_HOME directory.
It will fail with an exception.
This commit fixes the issue and adds a new test.
This PR fixes the issue and adds a new test.
Also tests >=100 are renamed because alphabetic order does not work for
them.
(cherry picked from commit 2ffc29306ff7366efc598e7b4dd2ce528895cd3a
with fixes by #40083 and #40118)
This commit adds a variant for every official distribution that omits
the bundled jdk. The "no-jdk" naming is conveyed through the package
classifier, alongside the platform. Package tests are also added for
each new distribution.
This breaks on windows where TMP dir default to C:\Windows and startup
fails with a permission error.
I tried to create a tmp dir and pass in `TMP` env, but it lead to a
class not found error, and since testclusers is already independent of
the calling environment I stopped there.
The posix_spawn method of launching a process from Java
goes via an intermediate process called jspawnhelper
which lives in the lib directory rather than the bin
directory and hence got missed by the original chmod
loop. This change adds jspawnhelper as a special case.
It's the only program that's in the lib directory in a
macOS JDK 11.
* Bundle java in distributions
Setting up a jdk is currently a required external step when installing
elasticsearch. This is particularly problematic for the rpm/deb packages
as installing a jdk in the same package installation command does not
guarantee any order, so must be done in separate steps. Additionally,
JAVA_HOME must be set and often causes problems in selecting a correct
jdk when, for example, the system java is an older unsupported version.
This commit bundles platform specific openjdks into each distribution.
In addition to eliminating the issues above, it also presents future
possible improvements like using jlink to build jdk images only
containing modules that elasticsearch uses.
closes#31845
* Back port build changes from #39102
This back-ports how versions are determined and bwc test are set up from
#39102 without enabling the bwc from current version tests so it's
easier/possible to backmerge future buld changes.
It's expected that the tets are lacking many of the required fixes in
this version to enable them.
This commit adds a new build type (together with deb/rpm/tar/zip) to
represent the official Docker images. This build type will be displayed
in APIs such as the main and nodes info APIs.
With this commit we provide more info in an existing error message that is
raised when the file `jvm.dll` cannot be found on Windows when installing
Elasticsearch as a service.
This commit makes the rpm metadata indicate the pre 7.0 noarch packages
are obsoleted by this package. This fixes an issue where upgrading with
yum would cause an error thinking there was nothing to upgrade.
closes#39414
This commit sets the BWC projects to build in parallel if Gradle was
invoked with parallal project execution enabled. This substantially
speeds up the time of building the BWC projects since there are many
dependent projects needed to build a BWC version.
Finding java on the path is sometimes confusing for users and
unexpected, as well as leading to a different java being used than a
user expects. This commit adds warning messages when starting
elasticsearch (or any tools like the plugin cli) and using java found
on the PATH instead of via JAVA_HOME.
As the Dockerfile evolved we don't need anymore certain commands like
`unzip`, `which` and `wget` allowing us to slightly shrink the images.
Backport of: #39040
Currently init scripts fail when `/proc/sys/vm/max_map_count` is not present
with `-bash: [: too many arguments`.
Fix conditional logic to avoid trying to set the `max_map_count` sysctl if not
present.
Backport of: #35933
Relates: #27236
This commit enables the copyDockerfile task to render a Dockerfile that
sources the Elasticsearch binary from artifacts.elastic.co. This is
needed for reproducibility and transparency for the official Docker
images in the Docker library.
This commit adds the 7.1 version constant to the 7.x branch.
Co-authored-by: Andy Bristol <andy.bristol@elastic.co>
Co-authored-by: Tim Brooks <tim@uncontended.net>
Co-authored-by: Christoph Büscher <cbuescher@posteo.de>
Co-authored-by: Luca Cavanna <javanna@users.noreply.github.com>
Co-authored-by: markharwood <markharwood@gmail.com>
Co-authored-by: Ioannis Kakavas <ioannis@elastic.co>
Co-authored-by: Nhat Nguyen <nhat.nguyen@elastic.co>
Co-authored-by: David Roberts <dave.roberts@elastic.co>
Co-authored-by: Jason Tedor <jason@tedor.me>
Co-authored-by: Alpar Torok <torokalpar@gmail.com>
Co-authored-by: David Turner <david.turner@elastic.co>
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
Co-authored-by: Tim Vernum <tim@adjective.org>
Co-authored-by: Albert Zaharovits <albert.zaharovits@gmail.com>
Renames the following settings to remove the mention of `zen` in their names:
- `discovery.zen.hosts_provider` -> `discovery.seed_providers`
- `discovery.zen.ping.unicast.concurrent_connects` -> `discovery.seed_resolver.max_concurrent_resolvers`
- `discovery.zen.ping.unicast.hosts.resolve_timeout` -> `discovery.seed_resolver.timeout`
- `discovery.zen.ping.unicast.hosts` -> `discovery.seed_addresses`
This commit adds classifiers to the distributions indicating the
OS (for archives) and platform. The current OSes are for windows, darwin (ie
macos) and linux. This change will allow future OS/architecture specific
changes to the distributions. Note the docs using distribution links
have been updated, but will be reworked in a followup to make OS
specific instructions for the archives.
In order to support JSON log format, a custom pattern layout was used and its configuration is enclosed in ESJsonLayout. Users are free to use their own patterns, but if smooth Beats integration is needed, they should use ESJsonLayout. EvilLoggerTests are left intact to make sure user's custom log patterns work fine.
To populate additional fields node.id and cluster.uuid which are not available at start time,
a cluster state update will have to be received and the values passed to log4j pattern converter.
A ClusterStateObserver.Listener is used to receive only one ClusteStateUpdate. Once update is received the nodeId and clusterUUid are set in a static field in a NodeAndClusterIdConverter.
Following fields are expected in JSON log lines: type, tiemstamp, level, component, cluster.name, node.name, node.id, cluster.uuid, message, stacktrace
see ESJsonLayout.java for more details and field descriptions
Docker log4j2 configuration is now almost the same as the one use for ES binary.
The only difference is that docker is using console appenders, whereas ES is using file appenders.
relates: #32850
The /etc/elasticsearch directory is currently configured as a config
file with noreplace. However, the directory itself is not config, and
can lead to an entire /etc/elasticsearch.rpmsave directory in some
situations. This commit fixes the ospackage config to not specify those
file bits for the directory itself, but only the files underneath it.
* Exit batch files explictly using ERRORLEVEL
This makes sure the exit code is preserved when calling the batch
files from different contexts other than DOS
Fixes#29582
This also fixes specific error codes being masked by an explict
exit /b 1
causing the useful exitcodes from ExitCodes to be lost.
* fix line breaks for calling cli to match the bash scripts
* indent size of bash files is 2, make sure editorconfig does the same for bat files
* update indenting to match bash files
* update elasticsearch-keystore.bat indenting
* Update elasticsearch-node.bat to exit outside of endlocal
elasticsearch-node tool helps to restore cluster if half or more of
master eligible nodes are lost. Of course, all bets are off, regarding
data consistency.
There are two parts of the tool: unsafe-bootstrap to be used when there
is still at least one master-eligible node alive and detach-cluster,
when there are no master-eligible nodes left.
This commit implements the first part.
Docs for the tool will be added separately as a part of #37812.
* Testing conventions now checks for tests in main
This is the last outstanding feature of the old NamingConventionsTask,
so time to remove it.
* PR review
This change adds a docker compose configuration that's used with
the `elasticsearch.test.fixtures` plugin to start up the image
and check that the TCP ports are up.
We can build on this to add other checks for culster health,
run REST tests, etc.
We can add multiple containers and configurations to the compose
file (e.x. test different env vars) and form clusters.
Currently integration tests which use either bwc snapshot versions or
the current version of elasticsearch depend on project substitutions to
link to the build of those artifacts. Likewise, vagrant tests use
dependency substitutions to get to bwc snapshots of rpm and debs.
This commit changes those to depend on the relevant project/configuration
and removes the dependency substitutions for distributions we do not
publish.
The integ tests currently use the raw zip project name as the
distribution type. This commit simplifies this specification to be
"default" or "oss". Whether zip or tar is used should be an internal
implementation detail of the integ test setup, which can (in the future)
be platform specific.
With the release of 11.0.2, the old URLs no longer work. This exposed a
few small bugs in the gradle config. One was that --no-cache was not
present in the docker build command, so it was not failing at
first. Then once only the ext.expansions was changed and the docker
build task was not, it was not executing it.
This commit updates the file docker's entrypoint script looks for when
deciding to process the ELASTIC_PASSWORD env var. The x-pack subdir
of bin no longer exists in 7.0, where the backcompat layer for x-pack
script locations was removed.
closes#37240
Some systems default to a nofile ulimit of 65535. To reduce the pain of
deploying Elasticsearch to such systems, this commit lowers the required
limit from 65536 to 65535.
This commit removes permission editing commands from the postinst
scriptlet. Instead, we now fully configure the owner/group (as well as
sticky bit) for these files and directories.
closes#37143
* Default include_type_name to false for get and put mappings.
* Default include_type_name to false for get field mappings.
* Add a constant for the default include_type_name value.
* Default include_type_name to false for get and put index templates.
* Default include_type_name to false for create index.
* Update create index calls in REST documentation to use include_type_name=true.
* Some minor clean-ups around the get index API.
* In REST tests, use include_type_name=true by default for index creation.
* Make sure to use 'expression == false'.
* Clarify the different IndexTemplateMetaData toXContent methods.
* Fix FullClusterRestartIT#testSnapshotRestore.
* Fix the ml_anomalies_default_mappings test.
* Fix GetFieldMappingsResponseTests and GetIndexTemplateResponseTests.
We make sure to specify include_type_name=true during xContent parsing,
so we continue to test the legacy typed responses. XContent generation
for the typeless responses is currently only covered by REST tests,
but we will be adding unit test coverage for these as we implement
each typeless API in the Java HLRC.
This commit also refactors GetMappingsResponse to follow the same appraoch
as the other mappings-related responses, where we read include_type_name
out of the xContent params, instead of creating a second toXContent method.
This gives better consistency in the response parsing code.
* Fix more REST tests.
* Improve some wording in the create index documentation.
* Add a note about types removal in the create index docs.
* Fix SmokeTestMonitoringWithSecurityIT#testHTTPExporterWithSSL.
* Make sure to mention include_type_name in the REST docs for affected APIs.
* Make sure to use 'expression == false' in FullClusterRestartIT.
* Mention include_type_name in the REST templates docs.
This commit makes the assemble tasks in the bwc projects noops by
setting the dependsOn directly. While we can not remove things from
dependsOn, we can still completely override the dependencies.
closes#33581
This commit adds a unique id to cluster blocks, so that they can be uniquely
identified if needed. This is important for the Close Index API where multiple
concurrent closing requests can be executed at the same time. By adding a
UUID to the cluster block, we can generate unique "closing block" that can
later be verified on shards and then checked again from the cluster state
before closing the index. When the verification on shard is done, the closing
block is replaced by the regular INDEX_CLOSED_BLOCK instance.
If something goes wrong, calling the Open Index API will remove the block.
Related to #33888
With this commit we instruct curl to retry with a backoff when
downloading the JDK for the Elasticsearch Docker image. This avoids
build failures on transient network issues. Note that this option
requires curl 7.12.3 or better.
Relates #37103
Relates #37113
We added some special handling for installing and removing the
ingest-geoip and ingest-user-agent plugins when we converted them to
modules. This special handling was done to minimize breaking users in a
minor release. However, do not want to maintain this behavior forever so
this commit removes that special handling in the master branch so that
starting with 7.0.0 this special handling will be gone.
* Deprecate types in index API
- deprecate type-based constructors of IndexRequest
- update tests to use typeless IndexRequest constructors
- no yaml tests as they have been already added in #35790
Relates to #35190
The following updates were made:
* Add deprecation warnings to `RestUpdateAction`, plus a test in `RestUpdateActionTests`.
* Deprecate relevant methods on the Java HLRC requests/ responses.
* Add HLRC integration tests for the typed APIs.
* Update documentation (for both the REST API and Java HLRC).
* Fix failing integration tests.
Because of an earlier PR, the REST yml tests were already updated (one version without types, and another legacy version that retains types).
The commit changes how indices are closed in the MetaDataIndexStateService.
It now uses a 3 steps process where writes are blocked on indices to be closed,
then some verifications are done on shards using the TransportVerifyShardBeforeCloseAction
added in #36249, and finally indices states are moved to CLOSE and their routing
tables removed.
The closing process also takes care of using the pre-7.0 way to close indices if the
cluster contains mixed version of nodes and a node does not support the TransportVerifyShardBeforeCloseAction. It also closes unassigned indices.
Related to #33888
When a security manager is present, the JVM will cache positive hostname
lookups indefinitely. This can be problematic, especially in the modern
world with cloud services where DNS addresses can change, or
environments using Docker containers where IP addresses could be
considered ephemeral. This behavior impacts cluster discovery,
cross-cluster replication and cross-cluster search, reindex from remote,
snapshot repositories, webhooks in Watcher, external authentication
mechanisms, and the Elastic Stack Monitoring Service. The experience of
watching a DNS lookup change yet not be reflected within Elasticsearch
is a poor experience for users. The reason the JVM has this is guard
against DNS cache posioning attacks. Yet, there is already a defense in
the modern world against such attacks: TLS. With proper certificate
validation, even if a resolver falls prey to a DNS cache poisoning
attack, using TLS would neuter the attack. Therefore we have a policy
with dubious security value that significantly impacts usability. As
such we make the usability/security tradeoff towards usability, since
the security risks are very low. This commit introduces new system
properties that Elasticsearch observes to override the JVM DNS cache
policy.
* Don't print download progress in batch mode
With this change we will no longer provide the progress bar in batch
mode.
Assuming that this is mode is mainly for consumption by tools which
will serialize the output, we shouldn't print a progress bar to be
for every percentile.
* PR review
For each API, the following updates were made:
- Add deprecation warnings to `Rest*Action`, plus tests in `Rest*ActionTests`.
- For each REST yml test, make sure there is one version without types, and another legacy version that retains types (called *_with_types.yml).
- Deprecate relevant methods on the Java HLRC requests/ responses.
- Update documentation (for both the REST API and Java HLRC).
This commit introduces the building of the Docker images as bonafide
packaging formats alongside our existing archive and packaging
distributions. This build is migrated from a dedicated repository, and
converted to Gradle in the process.
Currently is `java` is not in $PATH the preinst script fails
prematurely and prevents an appropriate message from getting displayed
to the user.
Make package installation more user friendly when java is not in
$PATH and add a test for it.
Also use a she-bang in the preinst script, as, at least in Debian,
maintainer scripts must start with the #! convention [1].
Relates #31845
[1] https://www.debian.org/doc/debian-policy/ch-maintainerscripts.html
In the long run we want to move all of startup to a Java program. This
will simplify our startup scripts and make maintenance of startup less
dependent on the underlying platform that we run on. This commit moves
the creation of the temporary directory off of system-dependent commands
and onto a simple Java program.
The list of official plugins accidentally included `qa` projects like,
well, `qa` and `amazon-ec2`. This changes the mechanism that we use to
build the list and adds a test to catch this.
Closes#35623
With this change, `Version` no longer carries information about the qualifier,
we still need a way to show the "display version" that does have both
qualifier and snapshot. This is now stored by the build and red from `META-INF`.
* Introduce property to set version qualifier
- VersionProperties.elasticsearch is now a string which can have qualifier
and snapshot too
- The Version class in the build no longer cares about snapshot and
qualifier.
This commit updates the procrun manager and service exes to 1.1.0. There
are a few bug fixes, including for a bug which can cause lingering
processes when removing the service.
Back in #32983 I broke running the integ-test-zip tests against an
external cluster by adding a test that reads the contents of the log
file. This fixes running against an external cluster by explicitly
skipping that test if running against an external cluster.
The BWC builds for the 6.x branch should be using JDK 11. This commit
fixes the BWC builds to specify that they use JDK 11 instead of JDK 10
which is now incompatible with the 6.x build.
To pass the HOSTNAME envrionment variable to the Windows service, we
have to add some command line flags to the service invocation. Namely,
we have to specify that we are passing HOSTNAME variable, and we will
pass for it the value of %%COMPUTERNAME%%. This ensures that if the
hostname is changed, we pick this up the next time that the service is
started. This change is needed for the service now that we use the
HOSTNAME as the default node name.
#32281 adds elasticsearch-shard to provide bwc version of elasticsearch-translog for 6.x; have to remove elasticsearch-translog for 7.0
Relates to #31389
When we implemented `refresh=wait_for` I added a test with the wrong
name. This caused us to not run it. The test asserted that running
several operations with `refresh=wait_for` did not fail if the index was
`_close`d while the operations were waiting. But to be honest, failure
here isn't that bad. The index being waited on is closed. You can't do
anything with it any way. The most important thing is actually that
these operations don't hang forever. Because hanging forever means that
the resources used by the operations aren't freed.
Anyway, when I noticed the error I reenabled the test. But they don't
pass consistently because *sometimes* the operations being tested fail.
They don't seem to hang and they always fail with "this index is closed
so you can't do anything with it" sorts of messages.
When the test started failing we disabled it again. This reenables the
test but causes it to ignore these "index is closed" failures. We'd
prefer they not happen at all but in the grand scheme of things they are
fine and making sure these operations don't hang is much more important.
This also updates the test to bring it more in line with my current
understanding of the "right" way to use the low level rest client.
* Add commented out JVM options for G1GC
These options are available now that we will be supporting G1GC for Java 10 and
above. They are also designed so that the CMS options don't have to be commented
out in order for the G1 options to take effect.
* Update wording
Changes the default of the `node.name` setting to the hostname of the
machine on which Elasticsearch is running. Previously it was the first 8
characters of the node id. This had the advantage of producing a unique
name even when the node name isn't configured but the disadvantage of
being unrecognizable and not being available until fairly late in the
startup process. Of particular interest is that it isn't available until
after logging is configured. This forces us to use a volatile read
whenever we add the node name to the log.
Using the hostname is available immediately on startup and is generally
recognizable but has the disadvantage of not being unique when run on
machines that don't set their hostname or when multiple elasticsearch
processes are run on the same host. I believe that, taken together, it
is better to default to the hostname.
1. Running multiple copies of Elasticsearch on the same node is a fairly
advanced feature. We do it all the as part of the elasticsearch build
for testing but we make sure to set the node name then.
2. That the node.name defaults to some flavor of "localhost" on an
unconfigured box feels like it isn't going to come up too much in
production. I expect most production deployments to at least set the
hostname.
As a bonus, production deployments need no longer set the node name in
most cases. At least in my experience most folks set it to the hostname
anyway.
I created a test a few days ago and declared a package that doesn't line
up with the directory structure. Oops. I a little surprised nothing
complained. But this fixes it.
I disabled one branch a few hours ago because it failed in CI. It looks
like other branches can also fail so I'll disable them as well and look
more closely on Monday.
Change the logging infrastructure to handle when the node name isn't
available in `elasticsearch.yml`. In that case the node name is not
available until long after logging is configured. The biggest change is
that the node name logging no longer fixed at pattern build time.
Instead it is read from a `SetOnce` on every print. If it is unset it is
printed as `unknown` so we have something that fits in the pattern.
On normal startup we don't log anything until the node name is available
so we never see the `unknown`s.
The main benefit of the upgrade for users is the search optimization for top scored documents when the total hit count is not needed. However this optimization is not activated in this change, there is another issue opened to discuss how it should be integrated smoothly.
Some comments about the change:
* Tests that can produce negative scores have been adapted but we need to forbid them completely: #33309Closes#32899
Gradle triggers the build of artifacts even if assemble is disabled.
Most users will not need bwc distributions after running `./gradlew
assemble` so instead of forcing them to add `-x buildBwcVersion`, we
detect this and skip the configuration of the artifacts.
- third party audit detects jar hell with JDK so we disable it
- jdk non portable in forbiddenapis detects classes being used from the
JDK ( for fips ) that are not portable, this is intended so we don't
scan for it on fips.
- different exclusion rules for third party audit on fips
Closes#33179
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `client` and `distribution` projects to use
the new versions.
On some Linux distributions tmpfiles.d cleans files and
directories under /tmp if they haven't been accessed for
10 days.
This can cause problems for ML as ML is currently the only
component that uses the temp directory more than a few
seconds after startup. If you didn't open an ML job for
10 days and then tried to open one then the temp directory
would have been deleted.
This commit prevents the problem occurring in the case of
Elasticsearch being managed by systemd, as systemd private
temp directories are not subject to periodic cleanup (by
default).
Additionally there are now some docs to warn people about
the risk and suggest a manual mitigation for .tar.gz users.
First, some background: we have 15 different methods to get a logger in
Elasticsearch but they can be broken down into three broad categories
based on what information is provided when building the logger.
Just a class like:
```
private static final Logger logger = ESLoggerFactory.getLogger(ActionModule.class);
```
or:
```
protected final Logger logger = Loggers.getLogger(getClass());
```
The class and settings:
```
this.logger = Loggers.getLogger(getClass(), settings);
```
Or more information like:
```
Loggers.getLogger("index.store.deletes", settings, shardId)
```
The goal of the "class and settings" variant is to attach the node name
to the logger. Because we don't always have the settings available, we
often use the "just a class" variant and get loggers without node names
attached. There isn't any real consistency here. Some loggers get the
node name because it is convenient and some do not.
This change makes the node name available to all loggers all the time.
Almost. There are some caveats are testing that I'll get to. But in
*production* code the node name is node available to all loggers. This
means we can stop using the "class and settings" variants to fetch
loggers which was the real goal here, but a pleasant side effect is that
the ndoe name is now consitent on every log line and optional by editing
the logging pattern. This is all powered by setting the node name
statically on a logging formatter very early in initialization.
Now to tests: tests can't set the node name statically because
subclasses of `ESIntegTestCase` run many nodes in the same jvm, even in
the same class loader. Also, lots of tests don't run with a real node so
they don't *have* a node name at all. To support multiple nodes in the
same JVM tests suss out the node name from the thread name which works
surprisingly well and easy to test in a nice way. For those threads
that are not part of an `ESIntegTestCase` node we stick whatever useful
information we can get form the thread name in the place of the node
name. This allows us to keep the logger format consistent.
Explicitly include all subdirectories of these folders in
/usr/share/elasticsearch in package distributions so that they are
managed by the package manager. This change does really have an
effect in the 7.x series, where there are no subdirectories in bin, and
we were already doing this in lib and modules. It does have an effect in
the 6.x series where the bin/x-pack subdirectory was not previously
tracked by the package manager and could be left behind on removal in
rpm distributions.
* Remove BouncyCastle dependency from runtime
This commit introduces a new gradle project that contains
the classes that have a dependency on BouncyCastle. For
the default distribution, It builds a jar from those and
in puts it in a subdirectory of lib
(/tools/security-cli) along with the BouncyCastle jars.
This directory is then passed in the
ES_ADDITIONAL_CLASSPATH_DIRECTORIES of the CLI tools
that use these classes.
BouncyCastle is removed as a runtime dependency (remains
as a compileOnly one) from x-pack core and x-pack security.
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `distribution/archives/integ-test-zip` project
to use the new versions.
The C2 compiler in JDK 10 appears to have an issue compiling to AVX-512
instructions (on hardware that supports such). As a workaround, this
commit adds a JVM flag on JDK 10+ to disable the use of AVX-512
instructions until a fix is introduced to the JDK. Instead, we use a
flag to enable AVX and AVX2 only.
Note: Based on my reading of the C2 code, this flag does not appear to
have any impact on hardware that does not support AVX2. I have tested
this manually on an Intel Atom C2538 processor that supports neither AVX
nor AVX2. I have also tested this manually on an Intel i5-3317U
processor that supports AVX but not AVX2.
Ensure our tests can run in a FIPS JVM
JKS keystores cannot be used in a FIPS JVM as attempting to use one
in order to init a KeyManagerFactory or a TrustManagerFactory is not
allowed.( JKS keystore algorithms for private key encryption are not
FIPS 140 approved)
This commit replaces JKS keystores in our tests with the
corresponding PEM encoded key and certificates both for key and trust
configurations.
Whenever it's not possible to refactor the test, i.e. when we are
testing that we can load a JKS keystore, etc. we attempt to
mute the test when we are running in FIPS 140 JVM. Testing for the
JVM is naive and is based on the name of the security provider as
we would control the testing infrastrtucture and so this would be
reliable enough.
Other cases of tests being muted are the ones that involve custom
TrustStoreManagers or KeyStoreManagers, null TLS Ciphers and the
SAMLAuthneticator class as we cannot sign XML documents in the
way we were doing. SAMLAuthenticator tests in a FIPS JVM can be
reenabled with precomputed and signed SAML messages at a later stage.
IT will be covered in a subsequent PR
We mistakenly enabled bundling of the default distribution's bin scripts
into the `integ-test-zip` artifact used by plugin authors to test plugins.
These didn't change the version of Elasticsearch used for testing but as
a side effect changed the LICENSE.txt from the Apache 2 license to the
Elastic license. We really didn't mean for that to happen. The bin script
and the elasticsearch-sql-cli jar file bundled into the distribution are
indeed governed by the Elastic license but we didn't intend for them to be
in the testing artifact in the first place. This removes them and fixes
the license of the `integ-test-zip` artifact.
* Upgrade bouncycastle
Required to fix
`bcprov-jdk15on-1.55.jar; invalid manifest format `
on jdk 11
* Downgrade bouncycastle to avoid invalid manifest
* Add checksum for new jars
* Update tika permissions for jdk 11
* Mute test failing on jdk 11
* Add JDK11 to CI
* Thread#stop(Throwable) was removed
http://mail.openjdk.java.net/pipermail/core-libs-dev/2018-June/053536.html
* Disable failing tests #31456
* Temprorarily disable doc tests
To see if there are other failures on JDK11
* Only blacklist specific doc tests
* Disable only failing tests in ingest attachment plugin
* Mute failing HDFS tests #31498
* Mute failing lang-painless tests #31500
* Fix backwards compatability builds
Fix JAVA version to 10 for ES 6.3
* Add 6.x to bwx -> java10
* Prefix out and err from buildBwcVersion for readability
```
> Task :distribution:bwc:next-bugfix-snapshot:buildBwcVersion
[bwc] :buildSrc:compileJava
[bwc] WARNING: An illegal reflective access operation has occurred
[bwc] WARNING: Illegal reflective access by org.codehaus.groovy.reflection.CachedClass (file:/home/alpar/.gradle/wrapper/dists/gradle-4.5-all/cg9lyzfg3iwv6fa00os9gcgj4/gradle-4.5/lib/groovy-all-2.4.12.jar) to method java.lang.Object.finalize()
[bwc] WARNING: Please consider reporting this to the maintainers of org.codehaus.groovy.reflection.CachedClass
[bwc] WARNING: Use --illegal-access=warn to enable warnings of further illegal reflective access operations
[bwc] WARNING: All illegal access operations will be denied in a future release
[bwc] :buildSrc:compileGroovy
[bwc] :buildSrc:writeVersionProperties
[bwc] :buildSrc:processResources
[bwc] :buildSrc:classes
[bwc] :buildSrc:jar
```
* Also set RUNTIME_JAVA_HOME for bwcBuild
So that we can make sure it's not too new for the build to understand.
* Align bouncycastle dependency
* fix painles array tets
closes#31500
* Update jar checksums
* Keep 8/10 runtime/compile untill consensus builds on 11
* Only skip failing tests if running on Java 11
* Failures are dependent of compile java version not runtime
* Condition doc test exceptions on compiler java version as well
* Disable hdfs tests based on runtime java
* Set runtime java to minimum supported for bwc
* PR review
* Add comment with ticket for forbidden apis
So the issue here is that we want to avoid setting vm.max_map_count if
it is already equal to the desired value (the bootstrap check requires
262144). The reason we want to avoid this is because in some use-cases
using sysctl to set this will fail. In this case, we want to enable
users to set this value externally and then allow that to cause using
sysctl to set the value to be skipped so that cases where using sysctl
will fail to no longer fail.
The package installation relies on java being in the path. If java is
not in the path, the tests fail at post-install time. This commit adds a
pre-install check to validate that java exists, and if it fails, the
package is never installed, and thus keeps a system clean, rather than
aborting at post-install and leaving behind a mess.
Closes#29665
With this commit we add the possibility to define further JVM options (and
system properties) based on the current environment. As a proof of concept, it
chooses Netty's allocator ergonomically based on the maximum defined heap size.
We switch to the unpooled allocator at 1GB heap size (value determined
experimentally, see #30684 for more details). We are also explicit about the
choice of the allocator in either case.
Relates #30684
This commit modifies the Sys V init startup scripts to only modify
vm.max_map_count if needed. In this case, needed means that the current
value is less than our default value of 262144 maps.
For 6.3 we renamed the `tar` and `zip` distributions to `oss-tar` and
`oss-zip`. Then we added new `tar` and `zip` distributions that contain
x-pack and are licensed under the Elastic License. Unfortunately we
accidentally generated POM files along side the new `tar` and `zip`
distributions that incorrectly claimed that they were Apache 2 licensed.
Oooops.
This fixes the license on the POMs generated for the `tar` and `zip`
distributions.
This was silly; Bouncy Castle has an armored input stream for reading
keys in ASCII armor format. This means that we do not need to strip the
header ourselves and base64 decode the key. This had problems anyway
because of discrepancies in the padding that Bouncy Castle would produce
and the JDK base64 decoder was expecting. Now that we armor input/output
the whole way during tests, we fix all random failures in test cases
too.
The java version checker requires being written with java 7 APIs.
In order to use java 8 apis in other launcher utilities, this commit
moves the java version checker back to its own jar.
This commit moves the default location of the full dependencies report
to be under the reports directory to align it with the location for the
dependenciesInfo task output.
A previous commit tried to add task dependencies for the
:distribution:generateDependenciesReport task so that a user did not
have to run "dependenciesInfo
:distribution:generateDependenciesReport". However this method did not
reliably add all task dependencies due to task ordering issues in
previous versions of Gradle and our build. This commit removes this for
now and a user will continue to have to run "dependenciesInfo
:distribution:generateDependenciesReport".
The goal of this commit is to address unknown licenses when producing
the dependencies info report. We have two different checks that we run
on licenses. The first check is whether or not we have stashed a copy of
the license text for a dependency in the repository. The second is to
map every dependency to a license type (e.g., BSD 3-clause). The problem
here is that the way we were handling licenses in the second check
differs from how we handle licenses in the first check. The first check
works by finding a license file with the name of the artifact followed
by the text -LICENSE.txt. Yet in some cases we allow mapping an artifact
name to another name used to check for the license (e.g., we map
lucene-.* to lucene, and opensaml-.* to shibboleth. The second check
understood the first way of looking for a license file but not the
second way. So in this commit we teach the second check about the
mappings from artifact names to license names. We do this by copying the
configuration from the dependencyLicenses task to the dependenciesInfo
task and then reusing the code from the first check in the second
check. There were some other challenges here though. For example,
dependenciesInfo was checking too many dependencies. For now, we should
only be checking direct dependencies and leaving transitive dependencies
from another org.elasticsearch artifact to that artifact (we want to do
this differently in a follow-up). We also want to disable
dependenciesInfo for projects that we do not publish, users only care
about licenses they might be exposed to if they use our assembled
products. With all of the changes in this commit we have eliminated all
unknown licenses. A follow-up will enforce that when we add a new
dependency it does not get mapped to unknown, these will be forbidden in
the future. Therefore, with this change and earlier changes are left
having no unknown licenses and two custom licenses; custom here means it
does not map to an SPDX license type. Those two licenses are xz and
ldapsdk. A future change will not allow additional custom licenses
unless they are explicitly whitelisted. This ensures that if a new
dependency is added it is mapped to an SPDX license or mapped to custom
because it does not have an SPDX license.
We no longer need animal sniffer because we use JDK functionality
(introduced in JDK 9) to target older versions of the JDK for
compilation. This functionality means that the JDK handles the problem
of ensuring that we do not use JDK APIs from the version that we are
compiling from that are not available in the version that we are
compiling to. A previous commit removed this for the REST client (where
we target JDK 7) but a few traces were left behind.
This commit adjusts the indentation in the CLI scripts to give a clear
visual indication that the line being indented is a continuation of the
previous line.
A previous refactoring of the CLI scripts migrated all of the CLI tools
to shell to a common script, elasticsearch-cli. This approach is fine in
Bash where it is easy to tear arguments apart but it doesn't work so
well on Windows where quoting is insane. To avoid having to tear the
arguments apart to separate the first argument to elasticsearch-cli from
the remaining arguments, we instead choose a strategy where we can avoid
tearing the arguments apart. To do this, we will instead pass the main
class by an environment variable and then we can pass the arguments
straight through. This will let us avoid awful quoting issues on
Windows. This is the Windows side of that effort and the Bash side was
in a previous commit.
A previous refactoring of the CLI scripts migrated all of the CLI tools
to shell to a common script, elasticsearch-cli. This approach is fine in
Bash where it is easy to tear arguments apart but it doesn't work so
well on Windows where quoting is insane. To avoid having to tear the
arguments apart to separate the first argument to elasticsearch-cli from
the remaining arguments, we instead choose a strategy where we can avoid
tearing the arguments apart. To do this, we will instead pass the main
class by an environment variable and then we can pass the arguments
straight through. This will let us avoid awful quoting issues on
Windows. This is the non-Windows side of that effort and the Windows
side will be in a follow-up.
If you invoke elasticsearch-plugin (or any other CLI script on Windows)
with a path that has a percent-encoded space (or any other
percent-encoded character) because the CLI scripts now shell into a
common shell script (elasticsearch-cli) the percent-encoded space ends
up being interpreted as a parameter. For example passing install --batch
file:/c:/encoded%20%space/analysis-icu-7.0.0.zip to elasticsearch-plugin
leads to the %20 being interpreted as %2 followed by a zero. Here, the
%2 is interpreted as the second parameter (--batch) and the
InstallPluginCommand class ends up seeing
file:/c/encoded--batch0space/analysis-icu-7.0.0.zip as the path which
will not exist. This commit addresses this by escaping the %* that is
used to pass the parameters to the common CLI script so that the common
script sees the correct parameters without the %2 being substituted.
Applies default file and directory permissions to zip distributions
similar to how they're set for the tar distributions. Previously zip
distributions would retain permissions they had on the build host's
working tree, which could vary depending on its umask
For #30799
A previous commit added the public key used for signing artifacts to the
plugin CLI. This commit is an iteration on that to add the header and
footer to the key so that it is clear what the key is. Instead, we strip
the header/footer on read. With this change we simplify our test where
keys already in this format are generated and we had to strip on the
test side.
We sign our official plugins yet this is not well-advertised and not at
all consumed during plugin installation. For plugins that are installed
over the intertubes, verifying that the downloaded artifact is signed by
our signing key would establish both integrity and validity of the
downloaded artifact. The chain of trust here is simple: our installable
artifacts (archive and package distributions) so that if a user trusts
our packages via their signatures, and our plugin installer (which would
be executing trusted code) verifies the downloaded plugin, then the user
can trust the downloaded plugin too. This commit adds verification of
official plugins downloaded during installation. We do not add
verification for offline plugin installs; a user can download our
signatures and verify the artifacts themselves.
This commit also needs to solve a few interesting challenges. One of
these is that we want the bouncy castle JARs on the classpath only for
the plugin installer, but not for the runtime
Elasticsearch. Additionally, we want these JARs to not be present for
the JAR hell checks. To address this, we shift these JARs into a
sub-directory of lib (lib/tools/plugin-cli) that is only loaded for the
plugin installer, and in the plugin installer we filter any JARs in this
directory from the JAR hell check.
If you have an unusual umask (e.g., 0002) and clone the GitHub
repository then files that we stick into our packages like the
README.textile and the license will have a file mode of 0664 on disk yet
we expect them to be 0644. Additionally, the same thing happens with
compiled artifacts like JARs. We try to set a default file mode yet it
does not seem to take everywhere. This commit adds explicit file modes
in some places that we were relying on the defaults to ensure that the
built artifacts have a consistent file mode regardless of the underlying
build host.
This commit reduces the Windows CLI scripts to one-liners by moving all
of the redundant logic to an elasticsearch-cli script. This commit is
only the Windows side, a previous commit covered the Linux side.
We post snapshot builds to snapshots.elastic.co yet the official plugin
installer will not let you install such plugins without manually
downloading them and installing them from a file URL. This commit adds
the ability for the plugin installer to use snapshots.elastic.co for
installing official plugins if a es.plugins.staging is set and the
current build is also a snapshot build. Otherwise, we continue to use
staging.elastic.co if the current build is a release build and
es.plugins.staging is set and, of course, use the release artifacts at
artifacts.elastic.co for release builds with es.plugins.staging unset.
This commit reduces the Linux CLI scripts to one-liners by moving all of
the redundant logic to an elasticsearch-cli script. This commit is only
the Linux side, a follow-up will do this for Windows too.
Meta plugins existed only for a short time, in order to enable breaking
up x-pack into multiple plugins. However, now that x-pack is no longer
installed as a plugin, the need for them has disappeared. This commit
removes the meta plugins infrastructure.
This commit removes xpack from being a meta-plugin-as-a-module.
It also fixes a couple tests which were missing task dependencies, which
failed once the gradle execution order changed.
This commit changes the default out-of-the-box configuration for the
number of shards from five to one. We think this will help address a
common problem of oversharding. For users with time-based indices that
need a different default, this can be managed with index templates. For
users with non-time-based indices that find they need to re-shard with
the split API in place they no longer need to resort only to
reindexing.
Since this has the impact of changing the default number of shards used
in REST tests, we want to ensure that we still have coverage for issues
that could arise from multiple shards. As such, we randomize (rarely)
the default number of shards in REST tests to two. This is managed via a
global index template. However, some tests check the templates that are
in the cluster state during the test. Since this template is randomly
there, we need a way for tests to skip adding the template used to set
the number of shards to two. For this we add the default_shards feature
skip. To avoid having to write our docs in a complicated way because
sometimes they might be behind one shard, and sometimes they might be
behind two shards we apply the default_shards feature skip to all docs
tests. That is, these tests will always run with the default number of
shards (one).
With the opening of xpack, we still retained a run task within
:x-pack:plugin. However, the root level run task also runs with the
default distribution. This change removes the extra run task inside
xpack in favor of using the root level task, and moves the
license/configuration code for run into the main run configuration.
This commit adds setting the homedir for the elasticsearch user to the
adduser command in the packaging preinstall script. While the
elasticsearch user is a system user, it is sometimes conventient to have
an existing homedir (even if it is not writeable). For example, running
cron as the elasticsearch user will try to change dir to the homedir.
closes#14453
Systemd overrides should happen through /etc/systemd/system, not
directly editing the service file. This commit removes marking the
service file as configuration for rpm and deb packages.
If the elasticsearch-env bash script chooses $ES_TMPDIR
then it also creates the directory. This change makes
elasticsearch-env.bat do the same thing: if %ES_TMPDIR%
is chosen by the script then the script will ensure it
exists, but if %ES_TMPDIR% is already set then the user
is responsible for creating it.
Relates #27609
Relates #28217
The overall NOTICE file for the ML X-Pack module should
include the notices from the 3rd party C++ components as
well as the 3rd party Java components.
This commit converts the deb package to use tildes in place of dash in
the internal package version. This is only relevant for prerelease
versions of elasticsearch. Previously, this was not possible due to
problems with the underlying library used by the ospackage plugin, but
since a recent upgrade, it now works.
closes#21139
Adds tasks that check that the all jars that we build have LICENSE.txt
and NOTICE.txt files and that the files are correct. Sets check to
depend on these task.
This is mostly there for extra parnoia because we automatically
configure all Jar tasks to include the LICENSE.txt and NOTICE.txt
files anyway. But it is quite possible to add configuration to those
tasks that would override either file.
This causes check to depend on several more things than it used to.
Take, for example, javadoc:
check depends on the new verifyJavadocJarNotice which depends on
extractJavadocJar which depends on javadocJar which depends on
javadoc, this check now depends on javadoc.
This commit adds some build time checks that the archive distributions
and package distributions contain the appropriate license and notice
files, and the package distributions contain the appropriate license
metadata.
This commit uses the customFields setting of the Deb task in ospackage
to work around the fact it does not know anything about the License
attribute natively.
THe deb distribution has a special copyright file instead of
LICENSE.txt, but the distributions were including the template file
instead of the rendered file (which includes the license name and text).
This commit adds the distribution type to the startup scripts so that we
can discern from log output and the main response the type of the
distribution (deb/rpm/tar/zip).
This commit moves the apache and elastic license files into a new
root level `licenses` directory and rewrites the top level LICENSE.txt
to clarify the repository has a mix of apache and elastic licensed code.
This commit adds license metadata to rpm and deb packages. Additionally,
it makes the copyright file for deb files follow the machine readable
specification, and sets the correct license text based on the oss vs
default deb packages.
X-Pack can no longer be installed as a plugin. This commit adds special
handling for when a user attempts to install X-Pack. This special
handling informs the user of the oss distribution that they should
download the default distribution and the user of the default
distribution that X-Pack does not require installation as it is included
by default.
Alpar Torok
Mark Vieira
Przemyslaw Gomulka
Ryan Ernst
Jason Tedor
Alpar Torok
Yogesh Gaikwad
Ioannis Kakavas
Dimitrios Liappis
Jay Modi
Andrey Ershov
David Roberts
Daniel Mitterdorfer
David Turner
Tim Vernum
Martijn Laarman
Andrey Ershov
Michael Basnight
Julie Tibshirani
Tanguy Leroux
Armin Braun
Mayya Sharipova
Yannick Welsch
Nik Everett
Kazuhiro Sera
Vladimir Dolzhenko
Lee Hinman
Jim Ferenczi
Andy Bristol
Ben Abrams
Costin Leau
Hendrik Muhs
Martijn van Groningen