We previously checked for a 405 response, but on 7.x BWC tests may be hitting versions that don't
support the 405 response (returning 400 or 500), so be more lenient in those cases.
Relates to #54513
This is a follow up to a previous commit that renamed MetaData to
Metadata in all of the places. In that commit in master, we renamed
META_DATA to METADATA, but lost this on the backport. This commit
addresses that.
This is a simple naming change PR, to fix the fact that "metadata" is a
single English word, and for too long we have not followed general
naming conventions for it. We are also not consistent about it, for
example, METADATA instead of META_DATA if we were trying to be
consistent with MetaData (although METADATA is correct when considered
in the context of "metadata"). This was a simple find and replace across
the code base, only taking a few minutes to fix this naming issue
forever.
* Comprehensively test supported/unsupported field type:agg combinations (#52493)
This adds a test to AggregatorTestCase that allows us to programmatically
verify that an aggregator supports or does not support a particular
field type. It fetches the list of registered field type parsers,
creates a MappedFieldType from the parser and then attempts to run
a basic agg against the field.
A supplied list of supported VSTypes are then compared against the
output (success or exception) and suceeds or fails the test accordingly.
Co-Authored-By: Mark Tozzi <mark.tozzi@gmail.com>
* Skip fields that are not aggregatable
* Use newIndexSearcher() to avoid incompatible readers (#52723)
Lucene's `newSearcher()` can generate readers like ParallelCompositeReader
which we can't use. We need to instead use our helper `newIndexSearcher`
* Add warnings/errors when V2 templates would match same indices… (#54367)
* Add warnings/errors when V2 templates would match same indices as V1
With the introduction of V2 index templates, we want to warn users that templates they put in place
might not take precedence (because v2 templates are going to "win"). This adds this validation at
`PUT` time for both V1 and V2 templates with the following rules:
** When creating or updating a V2 template
- If the v2 template would match indices for an existing v1 template or templates, provide a
warning (through the deprecation logging so it shows up to the client) as well as logging the
warning
The v2 warning looks like:
```
index template [my-v2-template] has index patterns [foo-*] matching patterns from existing older
templates [old-v1-template,match-all-template] with patterns (old-v1-template =>
[foo*],match-all-template => [*]); this template [my-v2-template] will take
precedence during new index creation
```
** When creating a V1 template
- If the v1 template is for index patterns of `"*"` and a v2 template exists, warn that the v2
template may take precedence
- If the v1 template is for index patterns other than all indices, and a v2 template exists that
would match, throw an error preventing creation of the v1 template
** When updating a V1 template (without changing its existing `index_patterns`!)
- If the v1 template is for index patterns that would match an existing v2 template, warn that the
v2 template may take precedence.
The v1 warning looks like:
```
template [my-v1-template] has index patterns [*] matching patterns from existing index templates
[existing-v2-template] with patterns (existing-v2-template => [foo*]); this template [my-v1-template] may be ignored in favor of an index template at index creation time
```
And the v1 error looks like:
```
template [my-v1-template] has index patterns [foo*] matching patterns from existing index templates
[existing-v2-template] with patterns (existing-v2-template => [f*]), use index templates (/_index_template) instead
```
Relates to #53101
* Remove v2 index and component templates when cleaning up tests
* Finish half-finished comment sentence
* Guard template removal and ignore for earlier versions of ES
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
* Also ignore 500 errors when clearing index template v2 templates
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
Currently all of our transport protocol decoding and aggregation occurs
in the individual transport modules. This means that each implementation
(test, netty, nio) must implement this logic. Additionally, it means
that the entire message has been read from the network before the server
package receives it.
This commit creates a pipeline in server which can be passed arbitrary
bytes to handle. Internally, the pipeline will decode, decompress, and
aggregate the messages. Additionally, this allows us to run many
megabytes of bytes through the pipeline in tests to ensure that the
logic works.
This work will enable future work:
Circuit breaking or backoff logic based on message type and byte
in the content aggregator.
Sharing bytes with the application layer using the ref counted
releasable network bytes.
Improved network monitoring based specifically on channels.
Finally, this fixes the bug where we do not circuit break on the correct
message size when compression is enabled.
Changes ThreadPool's schedule method to run the schedule task in the context of the thread
that scheduled the task.
This is the more sensible default for this method, and eliminates a range of bugs where the
current thread context is mistakenly dropped.
Closes#17143
This drop the "top level" pipeline aggregators from the aggregation
result tree which should save a little memory and a few serialization
bytes. Perhaps more imporantly, this provides a mechanism by which we
can remove *all* pipelines from the aggregation result tree. This will
save quite a bit of space when pipelines are deep in the tree.
Sadly, doing this isn't simple because of backwards compatibility. Nodes
before 7.7.0 *need* those pipelines. We provide them by setting passing
a `Supplier<PipelineTree>` into the root of the aggregation tree that we
only call if we need to serialize to a version before 7.7.0.
This solution works for cross cluster search because we always reduce
the aggregations in each remote cluster and then forward them back to
the coordinating node. Its quite possible that the coordinating node
needs the pipeline (say it is version 7.1.0) and the gateway node in the
remote cluster doesn't (version 7.7.0). In that case the data nodes
won't send the pipeline aggregations back to the gateway node.
Critically, the gateway node *will* send the pipeline aggregations back
to the coordinating node. This is all managed with that
`Supplier<PipelineTree>`, but *how* it is managed is a bit tricky.
Fixes an issue where the elasticsearch-node command-line tools would not work correctly
because PersistentTasksCustomMetaData contains named XContent from plugins. This PR
makes it so that the parsing for all custom metadata is skipped, even if the core system would
know how to handle it.
Closes#53549
DocsClientYamlTestSuiteIT sometimes fails for CCR
related tests because tests are started before the license
is fully applied and active within the cluster. The first
tests to be executed then fails with the error noticed
in #53430. This can be easily reproduced locally by
only running CCR docs tests.
This commit adds some @Before logic in
DocsClientYamlTestSuiteIT so that it waits for the
license to be active before running CCR tests.
Closes#53430
This moves the pipeline aggregation validation from the data node to the
coordinating node so that we, eventually, can stop sending pipeline
aggregations to the data nodes entirely. In fact, it moves it into the
"request validation" stage so multiple errors can be accumulated and
sent back to the requester for the entire request. We can't always take
advantage of that, but it'll be nice for folks not to have to play
whack-a-mole with validation.
This is implemented by replacing `PipelineAggretionBuilder#validate`
with:
```
protected abstract void validate(ValidationContext context);
```
The `ValidationContext` handles the accumulation of validation failures,
provides access to the aggregation's siblings, and implements a few
validation utility methods.
Benchmarking showed that the effect of the ExitableDirectoryReader
is reduced considerably when checking every 8191 docs. Moreover,
set the cancellable task before calling QueryPhase#preProcess()
and make sure we don't wrap with an ExitableDirectoryReader at all
when lowLevelCancellation is set to false to avoid completely any
performance impact.
Follows: #52822
Follows: #53166
Follows: #53496
(cherry picked from commit cdc377e8e74d3ca6c231c36dc5e80621aab47c69)
Use sequence numbers and force merge UUID to determine whether a shard has changed or not instead before falling back to comparing files to get incremental snapshots on primary fail-over.
This change adds a "grant API key action"
POST /_security/api_key/grant
that creates a new API key using the privileges of one user ("the
system user") to execute the action, but creates the API key with
the roles of the second user ("the end user").
This allows a system (such as Kibana) to create API keys representing
the identity and access of an authenticated user without requiring
that user to have permission to create API keys on their own.
This also creates a new QA project for security on trial licenses and runs
the API key tests there
Backport of: #52886
Today in the `CoordinatorTests` each node uses multiple threadpools. This is
mostly fine as they are almost completely stateless, except for the
`ThreadContext`: by using multiple threadpools we cannot make assertions that
the thread context is/isn't preserved as we expect. This commit consolidates
the threadpool instances in use so that each node uses just one.
This fixes two issues:
1. Currently, the future here is never resolved on assertion error so a failing test would take a full minute
to complete until the future times out.
2. S3 tests overide this method to busy assert on this method. This only works if an assertion error makes it
to the calling thread.
Closes#53508
It's simple to deprecate a field used in an ObjectParser just by adding deprecation
markers to the relevant ParseField objects. The warnings themselves don't currently
have any context - they simply say that a deprecated field has been used, but not
where in the input xcontent it appears. This commit adds the parent object parser
name and XContentLocation to these deprecation messages.
Note that the context is automatically stripped from warning messages when they
are asserted on by integration tests and REST tests, because randomization of
xcontent type during these tests means that the XContentLocation is not constant
Today cluster states are sometimes (rarely) applied in the default context
rather than system context, which means that any appliers which capture their
contexts cannot do things like remote transport actions when security is
enabled.
There are at least two ways that we end up applying the cluster state in the
default context:
1. locally applying a cluster state that indicates that the master has failed
2. the elected master times out while waiting for a response from another node
This commit ensures that cluster states are always applied in the system
context.
Mitigates #53751
* Adds per context settings:
`script.context.${CONTEXT}.cache_max_size` ~
`script.cache.max_size`
`script.context.${CONTEXT}.cache_expire` ~
`script.cache.expire`
`script.context.${CONTEXT}.max_compilations_rate` ~
`script.max_compilations_rate`
* Context cache is used if:
`script.max_compilations_rate=use-context`. This
value is dynamically updatable, so users can
switch back to the general cache if desired.
* Settings for context caches take the first value
that applies:
1) Context specific settings if set, eg
`script.context.ingest.cache_max_size`
2) Correlated general setting is set to the non-default
value, eg `script.cache.max_size`
3) Context default
The reason for 2's inclusion is to allow an easy
transition for users who've customized their general
cache settings.
Using the general cache settings for the context caches
results in higher effective settings, since they are
multiplied across the number of contexts. So a general
cache max size of 200 will become 200 * # of contexts.
However, this behavior it will avoid users snapping to a
value that is too low for them.
Backport of: #52855
Refs: #50152
Re-applies the change from #53523 along with test fixes.
closes#53626closes#53624closes#53622closes#53625
Co-authored-by: Nik Everett <nik9000@gmail.com>
Co-authored-by: Lee Hinman <dakrone@users.noreply.github.com>
Co-authored-by: Jake Landis <jake.landis@elastic.co>
Today it can happen that a transport message fails to send (for example,
because a transport interceptor rejects the request). In this case, the
response handler is never invoked, which can lead to necessary cleanups
not being performed. There are two ways to handle this. One is to expect
every callsite that sends a message to try/catch these exceptions and
handle them appropriately. The other is merely to invoke the response
handler to handle the exception, which is already equipped to handle
transport exceptions.
This begins to clean up how `PipelineAggregator`s and executed.
Previously, we would create the `PipelineAggregator`s on the data nodes
and embed them in the aggregation tree. When it came time to execute the
pipeline aggregation we'd use the `PipelineAggregator`s that were on the
first shard's results. This is inefficient because:
1. The data node needs to make the `PipelineAggregator` only to
serialize it and then throw it away.
2. The coordinating node needs to deserialize all of the
`PipelineAggregator`s even though it only needs one of them.
3. You end up with many `PipelineAggregator` instances when you only
really *need* one per pipeline.
4. `PipelineAggregator` needs to implement serialization.
This begins to undo these by building the `PipelineAggregator`s directly
on the coordinating node and using those instead of the
`PipelineAggregator`s in the aggregtion tree. In a follow up change
we'll stop serializing the `PipelineAggregator`s to node versions that
support this behavior. And, one day, we'll be able to remove
`PipelineAggregator` from the aggregation result tree entirely.
Importantly, this doesn't change how pipeline aggregations are declared
or parsed or requested. They are still part of the `AggregationBuilder`
tree because *that* makes sense.
This change introduces a new API in x-pack basic that allows to track the progress of a search.
Users can submit an asynchronous search through a new endpoint called `_async_search` that
works exactly the same as the `_search` endpoint but instead of blocking and returning the final response when available, it returns a response after a provided `wait_for_completion` time.
````
GET my_index_pattern*/_async_search?wait_for_completion=100ms
{
"aggs": {
"date_histogram": {
"field": "@timestamp",
"fixed_interval": "1h"
}
}
}
````
If after 100ms the final response is not available, a `partial_response` is included in the body:
````
{
"id": "9N3J1m4BgyzUDzqgC15b",
"version": 1,
"is_running": true,
"is_partial": true,
"response": {
"_shards": {
"total": 100,
"successful": 5,
"failed": 0
},
"total_hits": {
"value": 1653433,
"relation": "eq"
},
"aggs": {
...
}
}
}
````
The partial response contains the total number of requested shards, the number of shards that successfully returned and the number of shards that failed.
It also contains the total hits as well as partial aggregations computed from the successful shards.
To continue to monitor the progress of the search users can call the get `_async_search` API like the following:
````
GET _async_search/9N3J1m4BgyzUDzqgC15b/?wait_for_completion=100ms
````
That returns a new response that can contain the same partial response than the previous call if the search didn't progress, in such case the returned `version`
should be the same. If new partial results are available, the version is incremented and the `partial_response` contains the updated progress.
Finally if the response is fully available while or after waiting for completion, the `partial_response` is replaced by a `response` section that contains the usual _search response:
````
{
"id": "9N3J1m4BgyzUDzqgC15b",
"version": 10,
"is_running": false,
"response": {
"is_partial": false,
...
}
}
````
Asynchronous search are stored in a restricted index called `.async-search` if they survive (still running) after the initial submit. Each request has a keep alive that defaults to 5 days but this value can be changed/updated any time:
`````
GET my_index_pattern*/_async_search?wait_for_completion=100ms&keep_alive=10d
`````
The default can be changed when submitting the search, the example above raises the default value for the search to `10d`.
`````
GET _async_search/9N3J1m4BgyzUDzqgC15b/?wait_for_completion=100ms&keep_alive=10d
`````
The time to live for a specific search can be extended when getting the progress/result. In the example above we extend the keep alive to 10 more days.
A background service that runs only on the node that holds the first primary shard of the `async-search` index is responsible for deleting the expired results. It runs every hour but the expiration is also checked by running queries (if they take longer than the keep_alive) and when getting a result.
Like a normal `_search`, if the http channel that is used to submit a request is closed before getting a response, the search is automatically cancelled. Note that this behavior is only for the submit API, subsequent GET requests will not cancel if they are closed.
Asynchronous search are not persistent, if the coordinator node crashes or is restarted during the search, the asynchronous search will stop. To know if the search is still running or not the response contains a field called `is_running` that indicates if the task is up or not. It is the responsibility of the user to resume an asynchronous search that didn't reach a final response by re-submitting the query. However final responses and failures are persisted in a system index that allows
to retrieve a response even if the task finishes.
````
DELETE _async_search/9N3J1m4BgyzUDzqgC15b
````
The response is also not stored if the initial submit action returns a final response. This allows to not add any overhead to queries that completes within the initial `wait_for_completion`.
The `.async-search` index is a restricted index (should be migrated to a system index in +8.0) that is accessible only through the async search APIs. These APIs also ensure that only the user that submitted the initial query can retrieve or delete the running search. Note that admins/superusers would still be able to cancel the search task through the task manager like any other tasks.
Relates #49091
Co-authored-by: Luca Cavanna <javanna@users.noreply.github.com>
Using a Long alone is not strong enough for the id of search contexts
because we reset the id generator whenever a data node is restarted.
This can lead to two issues:
1. Fetch phase can fetch documents from another index
2. A scroll search can return documents from another index
This commit avoids these issues by adding a UUID to SearchContexId.
This commit introduces hidden aliases. These are similar to hidden
indices, in that they are not visible by default, unless explicitly
specified by name or by indicating that hidden indices/aliases are
desired.
The new alias property, `is_hidden` is implemented similarly to
`is_write_index`, except that it must be consistent across all indices
with a given alias - that is, all indices with a given alias must
specify the alias as either hidden, or all specify it as non-hidden,
either explicitly or by omitting the `is_hidden` property.
This commit updates the template used for watch history indices with
the hidden index setting so that new indices will be created as hidden.
Relates #50251
Backport of #52962
When we test backwards compatibility we often end up in a situation
where we *sometimes* get a warning, and sometimes don't. Like, we won't
get the warning if we're testing against an older version, but we will
in a newer one. Or we won't get the warning if the request randomly
lands on a node with an old version of the code. But we wouldn't if it
randomed into a node with newer code.
This adds `allowed_warnings` to our yaml test runner for those cases:
warnings declared this way are "allowed" but not "required".
Blocks #52959
Co-authored-by: Benjamin Trent <ben.w.trent@gmail.com>
Implement an Exitable DirectoryReader that wraps the original
DirectoryReader so that when a search task is cancelled the
DirectoryReaders also stop their work fast. This is usuful for
expensive operations like wilcard/prefix queries where the
DirectoryReaders can spend lots of time and consume resources,
as previously their work wouldn't stop even though the original
search task was cancelled (e.g. because of timeout or dropped client
connection).
(cherry picked from commit 67acaf61f33bc5f54e26541514d07e375c202e03)
Tests in GoogleCloudStorageBlobStoreRepositoryTests are known
to be flaky on JDK 8 (#51446, #52430 ) and we suspect a JDK
bug (https://bugs.openjdk.java.net/browse/JDK-8180754) that triggers
some assertion on the server side logic that emulates the Google
Cloud Storage service.
Sadly we were not able to reproduce the failures, even when using
the same OS (Debian 9, Ubuntu 16.04) and JDK (Oracle Corporation
1.8.0_241 [Java HotSpot(TM) 64-Bit Server VM 25.241-b07]) of
almost all the test failures on CI. While we spent some time fixing
code (#51933, #52431) to circumvent the JDK bug they are still flaky
on JDK-8. This commit mute these tests for JDK-8 only.
Close ##52906
This commit introduces a module for Kibana that exposes REST APIs that
will be used by Kibana for access to its system indices. These APIs are wrapped
versions of the existing REST endpoints. A new setting is also introduced since
the Kibana system indices' names are allowed to be changed by a user in case
multiple instances of Kibana use the same instance of Elasticsearch.
Additionally, the ThreadContext has been extended to indicate that the use of
system indices may be allowed in a request. This will be built upon in the future
for the protection of system indices.
Backport of #52385
Generalize how queries on `_index` are handled at rewrite time (#52486)
Since this change refactors rewrites, I also took it as an opportunity to adrress #49254: instead of returning the same queries you would get on a keyword field when a field is unmapped, queries get rewritten to a MatchNoDocsQueryBuilder.
This change exposed a couple bugs, like the fact that the percolator doesn't rewrite queries at query time, or that the significant_terms aggregation doesn't rewrite its inner filter, which I fixed.
Closes#49254
In #42838 we moved the terms index of all fields off-heap except the
`_id` field because we were worried it might make indexing slower. In
general, the indexing rate is only affected if explicit IDs are used, as
otherwise Elasticsearch almost never performs lookups in the terms
dictionary for the purpose of indexing. So it's quite wasteful to
require the terms index of `_id` to be loaded on-heap for users who have
append-only workloads. Furthermore I've been conducting benchmarks when
indexing with explicit ids on the http_logs dataset that suggest that
the slowdown is low enough that it's probably not worth forcing the terms
index to be kept on-heap. Here are some numbers for the median indexing
rate in docs/s:
| Run | Master | Patch |
| --- | ------- | ------- |
| 1 | 45851.2 | 46401.4 |
| 2 | 45192.6 | 44561.0 |
| 3 | 45635.2 | 44137.0 |
| 4 | 46435.0 | 44692.8 |
| 5 | 45829.0 | 44949.0 |
And now heap usage in MB for segments:
| Run | Master | Patch |
| --- | ------- | -------- |
| 1 | 41.1720 | 0.352083 |
| 2 | 45.1545 | 0.382534 |
| 3 | 41.7746 | 0.381285 |
| 4 | 45.3673 | 0.412737 |
| 5 | 45.4616 | 0.375063 |
Indexing rate decreased by 1.8% on average, while memory usage decreased
by more than 100x.
The `http_logs` dataset contains small documents and has a simple
indexing chain. More complex indexing chains, e.g. with more fields,
ingest pipelines, etc. would see an even lower decrease of indexing rate.
We consider index level read_only_allow_delete blocks temporary since
the DiskThresholdMonitor can automatically release those when an index
is no longer allocated on nodes above high threshold.
The rest status has therefore been changed to 429 when encountering this
index block to signal retryability to clients.
Related to #49393
This commit renames ElasticsearchAssertions#assertThrows to
assertRequestBuilderThrows and assertFutureThrows to avoid a
naming clash with JUnit 4.13+ and static imports of these methods.
Additionally, these methods have been updated to make use of
expectThrows internally to avoid duplicating the logic there.
Relates #51787
Backport of #52582
Phase 1 of adding compilation limits per context.
* Refactor rate limiting and caching into separate class,
`ScriptCache`, which will be used per context.
* Disable compilation limit for certain tests.
Backport of 0866031
Refs: #50152
Cache latest `RepositoryData` on heap when it's absolutely safe to do so (i.e. when the repository is in strictly consistent mode).
`RepositoryData` can safely be assumed to not grow to a size that would cause trouble because we often have at least two copies of it loaded at the same time when doing repository operations. Also, concurrent snapshot API status requests currently load it independently of each other and so on, making it safe to cache on heap and assume as "small" IMO.
The benefits of this move are:
* Much faster repository status API calls
* listing all snapshot names becomes instant
* Other operations are sped up massively too because they mostly operate in two steps: load repository data then load multiple other blobs to get the additional data
* Additional cloud cost savings
* Better resiliency, saving another spot where an IO issue could break the snapshot
* We can simplify a number of spots in the current code that currently pass around the repository data in tricky ways to avoid loading it multiple times in follow ups.
* Refactor Inflexible Snapshot Repository BwC (#52365)
Transport the version to use for a snapshot instead of whether to use shard generations in the snapshots in progress entry. This allows making upcoming repository metadata changes in a flexible manner in an analogous way to how we handle serialization BwC elsewhere.
Also, exposing the version at the repository API level will make it easier to do BwC relevant changes in derived repositories like source only or encrypted.
Currently we have three different implementations representing a
`ConnectionManager`. There is the basic `ConnectionManager` which
holds all connections for a cluster. And a remote connection manager
which support proxy behavior. And a stubbable connection manager for
tests. The remote and stubbable instances use the delegate pattern,
so this commit extracts an interface for them all to implement.
It looks like #52000 is caused by a slowdown in cluster state application
(maybe due to #50907) but I would like to understand the details to ensure that
there's nothing else going on here too before simply increasing the timeout.
This commit enables some relevant `DEBUG` loggers and also captures stack
traces from all threads rather than just the three hottest ones.
Closes#52450. `setRandomIndexSettings(...)` in `ESIntegTestCase` was
using both a thread-local and a supplied source of randomness. Fix this
method to only use the supplied source.
The `top_metrics` agg is kind of like `top_hits` but it only works on
doc values so it *should* be faster.
At this point it is fairly limited in that it only supports a single,
numeric sort and a single, numeric metric. And it only fetches the "very
topest" document worth of metric. We plan to support returning a
configurable number of top metrics, requesting more than one metric and
more than one sort. And, eventually, non-numeric sorts and metrics. The
trick is doing those things fairly efficiently.
Co-Authored by: Zachary Tong <zach@elastic.co>
This commit makes the names of fetch subphases more consistent:
* Now the names end in just 'Phase', whereas before some ended in
'FetchSubPhase'. This matches the query subphases like AggregationPhase.
* Some names include 'fetch' like FetchScorePhase to avoid ambiguity about what
they do.
This adds a builder and parsed results for the `string_stats`
aggregation directly to the high level rest client. Without this the
HLRC can't access the `string_stats` API without the elastic licensed
`analytics` module.
While I'm in there this adds a few of our usual unit tests and
modernizes the parsing.
Add a new cluster setting `search.allow_expensive_queries` which by
default is `true`. If set to `false`, certain queries that have
usually slow performance cannot be executed and an error message
is returned.
- Queries that need to do linear scans to identify matches:
- Script queries
- Queries that have a high up-front cost:
- Fuzzy queries
- Regexp queries
- Prefix queries (without index_prefixes enabled
- Wildcard queries
- Range queries on text and keyword fields
- Joining queries
- HasParent queries
- HasChild queries
- ParentId queries
- Nested queries
- Queries on deprecated 6.x geo shapes (using PrefixTree implementation)
- Queries that may have a high per-document cost:
- Script score queries
- Percolate queries
Closes: #29050
(cherry picked from commit a8b39ed842c7770bd9275958c9f747502fd9a3ea)
Modifies SLM's and ILM's history indices to be hidden indices for added
protection against accidental querying and deletion, and improves
IndexTemplateRegistry to handle upgrading index templates.
Also modifies the REST test cleanup to delete hidden indices.
Today we use `cluster.join.timeout` to prevent nodes from waiting indefinitely
if joining a faulty master that is too slow to respond, and
`cluster.publish.timeout` to allow a faulty master to detect that it is unable
to publish its cluster state updates in a timely fashion. If these timeouts
occur then the node restarts the discovery process in an attempt to find a
healthier master.
In the special case of `discovery.type: single-node` there is no point in
looking for another healthier master since the single node in the cluster is
all we've got. This commit suppresses these timeouts and instead lets the node
wait for joins and publications to succeed no matter how long this might take.
We can just put the `IndexId` instead of just the index name into the recovery soruce and
save one load of `RepositoryData` on each shard restore that way.
While we use `== false` as a more visible form of boolean negation
(instead of `!`), the true case is implied and the true value does not
need to explicitly checked. This commit converts cases that have slipped
into the code checking for `== true`.
This commit moves the logic that cancels search requests when the rest channel is closed
to a generic client that can be used by other APIs. This will be useful for any rest action
that wants to cancel the execution of a task if the underlying rest channel is closed by the
client before completion.
Relates #49931
Relates #50990
Relates #50990
* Allow Repository Plugins to Filter Metadata on Create
Add a hook that allows repository plugins to filter the repository metadata
before it gets written to the cluster state.
The docs tests have recently been running much slower than before (see #49753).
The gist here is that with ILM/SLM we do a lot of unnecessary setup / teardown work on each
test. Compounded with the slightly slower cluster state storage mechanism, this causes the
tests to run much slower.
In particular, on RAMDisk, docs:check is taking
ES 7.4: 6:55 minutes
ES master: 16:09 minutes
ES with this commit: 6:52 minutes
on SSD, docs:check is taking
ES 7.4: ??? minutes
ES master: 32:20 minutes
ES with this commit: 11:21 minutes
* Reload secure settings with password (#43197)
If a password is not set, we assume an empty string to be
compatible with previous behavior.
Only allow the reload to be broadcast to other nodes if TLS is
enabled for the transport layer.
* Add passphrase support to elasticsearch-keystore (#38498)
This change adds support for keystore passphrases to all subcommands
of the elasticsearch-keystore cli tool and adds a subcommand for
changing the passphrase of an existing keystore.
The work to read the passphrase in Elasticsearch when
loading, which will be addressed in a different PR.
Subcommands of elasticsearch-keystore can handle (open and create)
passphrase protected keystores
When reading a keystore, a user is only prompted for a passphrase
only if the keystore is passphrase protected.
When creating a keystore, a user is allowed (default behavior) to create one with an
empty passphrase
Passphrase can be set to be empty when changing/setting it for an
existing keystore
Relates to: #32691
Supersedes: #37472
* Restore behavior for force parameter (#44847)
Turns out that the behavior of `-f` for the add and add-file sub
commands where it would also forcibly create the keystore if it
didn't exist, was by design - although undocumented.
This change restores that behavior auto-creating a keystore that
is not password protected if the force flag is used. The force
OptionSpec is moved to the BaseKeyStoreCommand as we will presumably
want to maintain the same behavior in any other command that takes
a force option.
* Handle pwd protected keystores in all CLI tools (#45289)
This change ensures that `elasticsearch-setup-passwords` and
`elasticsearch-saml-metadata` can handle a password protected
elasticsearch.keystore.
For setup passwords the user would be prompted to add the
elasticsearch keystore password upon running the tool. There is no
option to pass the password as a parameter as we assume the user is
present in order to enter the desired passwords for the built-in
users.
For saml-metadata, we prompt for the keystore password at all times
even though we'd only need to read something from the keystore when
there is a signing or encryption configuration.
* Modify docs for setup passwords and saml metadata cli (#45797)
Adds a sentence in the documentation of `elasticsearch-setup-passwords`
and `elasticsearch-saml-metadata` to describe that users would be
prompted for the keystore's password when running these CLI tools,
when the keystore is password protected.
Co-Authored-By: Lisa Cawley <lcawley@elastic.co>
* Elasticsearch keystore passphrase for startup scripts (#44775)
This commit allows a user to provide a keystore password on Elasticsearch
startup, but only prompts when the keystore exists and is encrypted.
The entrypoint in Java code is standard input. When the Bootstrap class is
checking for secure keystore settings, it checks whether or not the keystore
is encrypted. If so, we read one line from standard input and use this as the
password. For simplicity's sake, we allow a maximum passphrase length of 128
characters. (This is an arbitrary limit and could be increased or eliminated.
It is also enforced in the keystore tools, so that a user can't create a
password that's too long to enter at startup.)
In order to provide a password on standard input, we have to account for four
different ways of starting Elasticsearch: the bash startup script, the Windows
batch startup script, systemd startup, and docker startup. We use wrapper
scripts to reduce systemd and docker to the bash case: in both cases, a
wrapper script can read a passphrase from the filesystem and pass it to the
bash script.
In order to simplify testing the need for a passphrase, I have added a
has-passwd command to the keystore tool. This command can run silently, and
exit with status 0 when the keystore has a password. It exits with status 1 if
the keystore doesn't exist or exists and is unencrypted.
A good deal of the code-change in this commit has to do with refactoring
packaging tests to cleanly use the same tests for both the "archive" and the
"package" cases. This required not only moving tests around, but also adding
some convenience methods for an abstraction layer over distribution-specific
commands.
* Adjust docs for password protected keystore (#45054)
This commit adds relevant parts in the elasticsearch-keystore
sub-commands reference docs and in the reload secure settings API
doc.
* Fix failing Keystore Passphrase test for feature branch (#50154)
One problem with the passphrase-from-file tests, as written, is that
they would leave a SystemD environment variable set when they failed,
and this setting would cause elasticsearch startup to fail for other
tests as well. By using a try-finally, I hope that these tests will fail
more gracefully.
It appears that our Fedora and Ubuntu environments may be configured to
store journald information under /var rather than under /run, so that it
will persist between boots. Our destructive tests that read from the
journal need to account for this in order to avoid trying to limit the
output we check in tests.
* Run keystore management tests on docker distros (#50610)
* Add Docker handling to PackagingTestCase
Keystore tests need to be able to run in the Docker case. We can do this
by using a DockerShell instead of a plain Shell when Docker is running.
* Improve ES startup check for docker
Previously we were checking truncated output for the packaged JDK as
an indication that Elasticsearch had started. With new preliminary
password checks, we might get a false positive from ES keystore
commands, so we have to check specifically that the Elasticsearch
class from the Bootstrap package is what's running.
* Test password-protected keystore with Docker (#50803)
This commit adds two tests for the case where we mount a
password-protected keystore into a Docker container and provide a
password via a Docker environment variable.
We also fix a logging bug where we were logging the identifier for an
array of strings rather than the contents of that array.
* Add documentation for keystore startup prompting (#50821)
When a keystore is password-protected, Elasticsearch will prompt at
startup. This commit adds documentation for this prompt for the archive,
systemd, and Docker cases.
Co-authored-by: Lisa Cawley <lcawley@elastic.co>
* Warn when unable to upgrade keystore on debian (#51011)
For Red Hat RPM upgrades, we warn if we can't upgrade the keystore. This
commit brings the same logic to the code for Debian packages. See the
posttrans file for gets executed for RPMs.
* Restore handling of string input
Adds tests that were mistakenly removed. One of these tests proved
we were not handling the the stdin (-x) option correctly when no
input was added. This commit restores the original approach of
reading stdin one char at a time until there is no more (-1, \r, \n)
instead of using readline() that might return null
* Apply spotless reformatting
* Use '--since' flag to get recent journal messages
When we get Elasticsearch logs from journald, we want to fetch only log
messages from the last run. There are two reasons for this. First, if
there are many logs, we might get a string that's too large for our
utility methods. Second, when we're looking for a specific message or
error, we almost certainly want to look only at messages from the last
execution.
Previously, we've been trying to do this by clearing out the physical
files under the journald process. But there seems to be some contention
over these directories: if journald writes a log file in between when
our deletion command deletes the file and when it deletes the log
directory, the deletion will fail.
It seems to me that we might be able to use journald's "--since" flag to
retrieve only log messages from the last run, and that this might be
less likely to fail due to race conditions in file deletion.
Unfortunately, it looks as if the "--since" flag has a granularity of
one-second. I've added a two-second sleep to make sure that there's a
sufficient gap between the test that will read from journald and the
test before it.
* Use new journald wrapper pattern
* Update version added in secure settings request
Co-authored-by: Lisa Cawley <lcawley@elastic.co>
Co-authored-by: Ioannis Kakavas <ikakavas@protonmail.com>
This commit sets `xpack.security.ssl.diagnose.trust` to false in all
of our tests when running in FIPS 140 mode and when settings objects
are used to create an instance of the SSLService. This is needed
in 7.x because setting xpack.security.ssl.diagnose.trust to true
wraps SunJSSE TrustManager with our own DiagnosticTrustManager and
this is not allowed when SunJSSE is in FIPS mode.
An alternative would be to set xpack.security.fips.enabled to
true which would also implicitly disable
xpack.security.ssl.diagnose.trust but would have additional effects
(would require that we set PBKDF2 for password hashing algorithm in
all test clusters, would prohibit using JKS keystores in nodes even
if relevant tests have been muted in FIPS mode etc.)
Relates: #49900Resolves: #51268
This change changes the way to run our test suites in
JVMs configured in FIPS 140 approved mode. It does so by:
- Configuring any given runtime Java in FIPS mode with the bundled
policy and security properties files, setting the system
properties java.security.properties and java.security.policy
with the == operator that overrides the default JVM properties
and policy.
- When runtime java is 11 and higher, using BouncyCastle FIPS
Cryptographic provider and BCJSSE in FIPS mode. These are
used as testRuntime dependencies for unit
tests and internal clusters, and copied (relevant jars)
explicitly to the lib directory for testclusters used in REST tests
- When runtime java is 8, using BouncyCastle FIPS
Cryptographic provider and SunJSSE in FIPS mode.
Running the tests in FIPS 140 approved mode doesn't require an
additional configuration either in CI workers or locally and is
controlled by specifying -Dtests.fips.enabled=true
This reverts commit c7fd24ca1569a809b499caf34077599e463bb8d6.
Now that JDK-8236582 is fixed in JDK 14 EA, we can revert the workaround.
Relates #50523 and #50512
LuceneChangesSnapshot can be slow if nested documents are heavily used.
Also, it estimates the number of operations to be recovered in peer
recoveries inaccurately. With this change, we prefer excluding the
nested non-root documents in a Lucene query instead.
* Fix Rest Tests Failing to Cleanup Rollup Jobs
If the rollup jobs index doesn't exist for some reason (like running against a 6.x cluster)
we should just assume the jobs have been cleaned up and move on.
Closes#50819
Adding back accidentally removed jvm option that is required to enforce
start of the week = Monday in IsoCalendarDataProvider.
Adding a `feature` to yml test in order to skip running it in JDK8
commit that removed it 398c802
commit that backports SystemJvmOptions c4fbda3
relates 7.x backport of code that enforces CalendarDataProvider use #48349
This change introduces a new feature for indices so that they can be
hidden from wildcard expansion. The feature is referred to as hidden
indices. An index can be marked hidden through the use of an index
setting, `index.hidden`, at creation time. One primary use case for
this feature is to have a construct that fits indices that are created
by the stack that contain data used for display to the user and/or
intended for querying by the user. The desire to keep them hidden is
to avoid confusing users when searching all of the data they have
indexed and getting results returned from indices created by the
system.
Hidden indices have the following properties:
* API calls for all indices (empty indices array, _all, or *) will not
return hidden indices by default.
* Wildcard expansion will not return hidden indices by default unless
the wildcard pattern begins with a `.`. This behavior is similar to
shell expansion of wildcards.
* REST API calls can enable the expansion of wildcards to hidden
indices with the `expand_wildcards` parameter. To expand wildcards
to hidden indices, use the value `hidden` in conjunction with `open`
and/or `closed`.
* Creation of a hidden index will ignore global index templates. A
global index template is one with a match-all pattern.
* Index templates can make an index hidden, with the exception of a
global index template.
* Accessing a hidden index directly requires no additional parameters.
Backport of #50452
Check it out:
```
$ curl -u elastic:password -HContent-Type:application/json -XPOST localhost:9200/test/_update/foo?pretty -d'{
"dac": {}
}'
{
"error" : {
"root_cause" : [
{
"type" : "x_content_parse_exception",
"reason" : "[2:3] [UpdateRequest] unknown field [dac] did you mean [doc]?"
}
],
"type" : "x_content_parse_exception",
"reason" : "[2:3] [UpdateRequest] unknown field [dac] did you mean [doc]?"
},
"status" : 400
}
```
The tricky thing about implementing this is that x-content doesn't
depend on Lucene. So this works by creating an extension point for the
error message using SPI. Elasticsearch's server module provides the
"spell checking" implementation.
s
* Track Snapshot Version in RepositoryData (#50930)
Add tracking of snapshot versions to RepositoryData to make BwC logic more efficient.
Follow up to #50853
There is a JVM bug causing `Thread#suspend` calls to randomly take
multiple seconds breaking these tests that call the method numerous times
in a loop. Increasing the timeout would will not work since we may call
`suspend` tens if not hundreds of times and even a small number of them
experiencing the blocking will lead to multiple minutes of waiting.
This PR detects the specific issue by timing the `Thread#suspend` calls and
skips the remainder of the test if it timed out because of the JVM bug.
Closes#50047
* Move metadata storage to Lucene (#50907)
Today we split the on-disk cluster metadata across many files: one file for the metadata of each
index, plus one file for the global metadata and another for the manifest. Most metadata updates
only touch a few of these files, but some must write them all. If a node holds a large number of
indices then it's possible its disks are not fast enough to process a complete metadata update before timing out. In severe cases affecting master-eligible nodes this can prevent an election
from succeeding.
This commit uses Lucene as a metadata storage for the cluster state, and is a squashed version
of the following PRs that were targeting a feature branch:
* Introduce Lucene-based metadata persistence (#48733)
This commit introduces `LucenePersistedState` which master-eligible nodes
can use to persist the cluster metadata in a Lucene index rather than in
many separate files.
Relates #48701
* Remove per-index metadata without assigned shards (#49234)
Today on master-eligible nodes we maintain per-index metadata files for every
index. However, we also keep this metadata in the `LucenePersistedState`, and
only use the per-index metadata files for importing dangling indices. However
there is no point in importing a dangling index without any shard data, so we
do not need to maintain these extra files any more.
This commit removes per-index metadata files from nodes which do not hold any
shards of those indices.
Relates #48701
* Use Lucene exclusively for metadata storage (#50144)
This moves metadata persistence to Lucene for all node types. It also reenables BWC and adds
an interoperability layer for upgrades from prior versions.
This commit disables a number of tests related to dangling indices and command-line tools.
Those will be addressed in follow-ups.
Relates #48701
* Add command-line tool support for Lucene-based metadata storage (#50179)
Adds command-line tool support (unsafe-bootstrap, detach-cluster, repurpose, & shard
commands) for the Lucene-based metadata storage.
Relates #48701
* Use single directory for metadata (#50639)
Earlier PRs for #48701 introduced a separate directory for the cluster state. This is not needed
though, and introduces an additional unnecessary cognitive burden to the users.
Co-Authored-By: David Turner <david.turner@elastic.co>
* Add async dangling indices support (#50642)
Adds support for writing out dangling indices in an asynchronous way. Also provides an option to
avoid writing out dangling indices at all.
Relates #48701
* Fold node metadata into new node storage (#50741)
Moves node metadata to uses the new storage mechanism (see #48701) as the authoritative source.
* Write CS asynchronously on data-only nodes (#50782)
Writes cluster states out asynchronously on data-only nodes. The main reason for writing out
the cluster state at all is so that the data-only nodes can snap into a cluster, that they can do a
bit of bootstrap validation and so that the shard recovery tools work.
Cluster states that are written asynchronously have their voting configuration adapted to a non
existing configuration so that these nodes cannot mistakenly become master even if their node
role is changed back and forth.
Relates #48701
* Remove persistent cluster settings tool (#50694)
Adds the elasticsearch-node remove-settings tool to remove persistent settings from the on
disk cluster state in case where it contains incompatible settings that prevent the cluster from
forming.
Relates #48701
* Make cluster state writer resilient to disk issues (#50805)
Adds handling to make the cluster state writer resilient to disk issues. Relates to #48701
* Omit writing global metadata if no change (#50901)
Uses the same optimization for the new cluster state storage layer as the old one, writing global
metadata only when changed. Avoids writing out the global metadata if none of the persistent
fields changed. Speeds up server:integTest by ~10%.
Relates #48701
* DanglingIndicesIT should ensure node removed first (#50896)
These tests occasionally failed because the deletion was submitted before the
restarting node was removed from the cluster, causing the deletion not to be
fully acked. This commit fixes this by checking the restarting node has been
removed from the cluster.
Co-authored-by: David Turner <david.turner@elastic.co>
* fix tests
Co-authored-by: David Turner <david.turner@elastic.co>
* Fix Snapshot Repository Corruption in Downgrade Scenarios (#50692)
This PR introduces test infrastructure for downgrading a cluster while interacting with a given repository.
It fixes the fact that repository metadata in the new format could be written while there's still older snapshots in the repository that require the old-format metadata to be restorable.
It's impossible to tell why #50754 fails without this change.
We're failing to close the `exchange` somewhere and there is no
write timeout in the GCS SDK (something to look into separately)
only a read timeout on the socket so if we're failing on an assertion without
reading the full request body (at least into the read-buffer) we're locking up
waiting forever on `write0`.
This change ensure the `exchange` is closed in the tests where we could lock up
on a write and logs the failure so we can find out what broke #50754.
This PR adds per-field metadata that can be set in the mappings and is later
returned by the field capabilities API. This metadata is completely opaque to
Elasticsearch but may be used by tools that index data in Elasticsearch to
communicate metadata about fields with tools that then search this data. A
typical example that has been requested in the past is the ability to attach
a unit to a numeric field.
In order to not bloat the cluster state, Elasticsearch requires that this
metadata be small:
- keys can't be longer than 20 chars,
- values can only be numbers or strings of no more than 50 chars - no inner
arrays or objects,
- the metadata can't have more than 5 keys in total.
Given that metadata is opaque to Elasticsearch, field capabilities don't try to
do anything smart when merging metadata about multiple indices, the union of
all field metadatas is returned.
Here is how the meta might look like in mappings:
```json
{
"properties": {
"latency": {
"type": "long",
"meta": {
"unit": "ms"
}
}
}
}
```
And then in the field capabilities response:
```json
{
"latency": {
"long": {
"searchable": true,
"aggreggatable": true,
"meta": {
"unit": [ "ms" ]
}
}
}
}
```
When there are no conflicts, values are arrays of size 1, but when there are
conflicts, Elasticsearch includes all unique values in this array, without
giving ways to know which index has which metadata value:
```json
{
"latency": {
"long": {
"searchable": true,
"aggreggatable": true,
"meta": {
"unit": [ "ms", "ns" ]
}
}
}
}
```
Closes#33267
Introduce a new static setting, `gateway.auto_import_dangling_indices`, which prevents dangling indices from being automatically imported. Part of #48366.
This test seems to be bogus as it was confusing a nominal execution time with a
delay (i.e. an elapsed time). This commit reworks the test to address this.
Fixes#50650
* Fix GCS Mock Broken Handling of some Blobs
We were incorrectly handling blobs starting in `\r\n` which broke
tests randomly when blobs started on these.
Relates #49429
* Adds JavaDoc to `AbstractWireTestCase` and
`AbstractWireSerializingTestCase` so it is more obvious you should prefer
the latter if you have a choice
* Moves the `instanceReader` method out of `AbstractWireTestCase` becaue
it is no longer used.
* Marks a bunch of methods final so it is more obvious which classes are
for what.
* Cleans up the side effects of the above.
The additional change to the original PR (#49657), is that `org.elasticsearch.client.cluster.RemoteConnectionInfo` now parses the initial_connect_timeout field as a string instead of a TimeValue instance.
The reason that this is needed is because that the initial_connect_timeout field in the remote connection api is serialized for human consumption, but not for parsing purposes.
Therefore the HLRC can't parse it correctly (which caused test failures in CI, but not in the PR CI
:( ). The way this field is serialized needs to be changed in the remote connection api, but that is a breaking change. We should wait making this change until rest api versioning is introduced.
Co-Authored-By: j-bean <anton.shuvaev91@gmail.com>
Co-authored-by: j-bean <anton.shuvaev91@gmail.com>
Today, the replica allocator uses peer recovery retention leases to
select the best-matched copies when allocating replicas of indices with
soft-deletes. We can employ this mechanism for indices without
soft-deletes because the retaining sequence number of a PRRL is the
persisted global checkpoint (plus one) of that copy. If the primary and
replica have the same retaining sequence number, then we should be able
to perform a noop recovery. The reason is that we must be retaining
translog up to the local checkpoint of the safe commit, which is at most
the global checkpoint of either copy). The only limitation is that we
might not cancel ongoing file-based recoveries with PRRLs for noop
recoveries. We can't make the translog retention policy comply with
PRRLs. We also have this problem with soft-deletes if a PRRL is about to
expire.
Relates #45136
Relates #46959
We need to make sure that the global checkpoints and peer recovery
retention leases were advanced to the max_seq_no and synced; otherwise,
we can risk expiring some peer recovery retention leases because of the
file-based recovery threshold.
Relates #49448
* Add ILM histore store index (#50287)
* Add ILM histore store index
This commit adds an ILM history store that tracks the lifecycle
execution state as an index progresses through its ILM policy. ILM
history documents store output similar to what the ILM explain API
returns.
An example document with ALL fields (not all documents will have all
fields) would look like:
```json
{
"@timestamp": 1203012389,
"policy": "my-ilm-policy",
"index": "index-2019.1.1-000023",
"index_age":123120,
"success": true,
"state": {
"phase": "warm",
"action": "allocate",
"step": "ERROR",
"failed_step": "update-settings",
"is_auto-retryable_error": true,
"creation_date": 12389012039,
"phase_time": 12908389120,
"action_time": 1283901209,
"step_time": 123904107140,
"phase_definition": "{\"policy\":\"ilm-history-ilm-policy\",\"phase_definition\":{\"min_age\":\"0ms\",\"actions\":{\"rollover\":{\"max_size\":\"50gb\",\"max_age\":\"30d\"}}},\"version\":1,\"modified_date_in_millis\":1576517253463}",
"step_info": "{... etc step info here as json ...}"
},
"error_details": "java.lang.RuntimeException: etc\n\tcaused by:etc etc etc full stacktrace"
}
```
These documents go into the `ilm-history-1-00000N` index to provide an
audit trail of the operations ILM has performed.
This history storage is enabled by default but can be disabled by setting
`index.lifecycle.history_index_enabled` to `false.`
Resolves#49180
* Make ILMHistoryStore.putAsync truly async (#50403)
This moves the `putAsync` method in `ILMHistoryStore` never to block.
Previously due to the way that the `BulkProcessor` works, it was possible
for `BulkProcessor#add` to block executing a bulk request. This was bad
as we may be adding things to the history store in cluster state update
threads.
This also moves the index creation to be done prior to the bulk request
execution, rather than being checked every time an operation was added
to the queue. This lessens the chance of the index being created, then
deleted (by some external force), and then recreated via a bulk indexing
request.
Resolves#50353
Co-authored-by: Daniel Huang <danielhuang@tencent.com>
This is a spinoff of #48130 that generalizes the proposal to allow early termination with the composite aggregation when leading sources match a prefix or the entire index sort specification.
In such case the composite aggregation can use the index sort natural order to early terminate the collection when it reaches a composite key that is greater than the bottom of the queue.
The optimization is also applicable when a query other than match_all is provided. However the optimization is deactivated for sources that match the index sort in the following cases:
* Multi-valued source, in such case early termination is not possible.
* missing_bucket is set to true
Avoid backwards incompatible changes for 8.x and 7.6 by removing type
restriction on compile and Factory. Factories may optionally implement
ScriptFactory. If so, then they can indicate determinism and thus
cacheability.
**Backport**
Relates: #49466
Cache results from queries that use scripts if they use only
deterministic API calls. Nondeterministic API calls are marked in the
whitelist with the `@nondeterministic` annotation. Examples are
`Math.random()` and `new Date()`.
Refs: #49466
We need to read in a loop here. A single read to a huge byte array will
only read 16k max with the S3 SDK so if the blob we're trying to fully
read is larger we close early and fail the size comparison.
Also, drain streams fully when checking existence to avoid S3 SDK warnings.
With node ordinals gone, there's no longer a need for such a complicated full cluster restart
procedure (as we can now uniquely associate nodes to data folders).
Follow-up to #41652
Follow up to #49729
This change removes falling back to listing out the repository contents to find the latest `index-N` in write-mounted blob store repositories.
This saves 2-3 list operations on each snapshot create and delete operation. Also it makes all the snapshot status APIs cheaper (and faster) by saving one list operation there as well in many cases.
This removes the resiliency to concurrent modifications of the repository as a result and puts a repository in a `corrupted` state in case loading `RepositoryData` failed from the assumed generation.
* Remove BlobContainer Tests against Mocks
Removing all these weird mocks as asked for by #30424.
All these tests are now part of real repository ITs and otherwise left unchanged if they had
independent tests that didn't call the `createBlobStore` method previously.
The HDFS tests also get added coverage as a side-effect because they did not have an implementation
of the abstract repository ITs.
Closes#30424
Since 7.4, we switch from translog to Lucene as the source of history
for peer recoveries. However, we reduce the likelihood of
operation-based recoveries when performing a full cluster restart from
pre-7.4 because existing copies do not have PPRL.
To remedy this issue, we fallback using translog in peer recoveries if
the recovering replica does not have a peer recovery retention lease,
and the replication group hasn't fully migrated to PRRL.
Relates #45136
Today we do not use retention leases in peer recovery for closed indices
because we can't sync retention leases on closed indices. This change
allows that ability and adjusts peer recovery to use retention leases
for all indices with soft-deletes enabled.
Relates #45136
Co-authored-by: David Turner <david.turner@elastic.co>
See discussion in #50047 (comment).
There are reproducible issues with Thread#suspend in Jdk11 and Jdk12 for me locally
and we have one failure for each on CI.
Jdk8 and Jdk13 are stable though on CI and in my testing so I'd selectively disable
this test here to keep the coverage. We aren't using suspend in production code so the
JDK bug behind this does not affect us.
Closes#50047
* Remove Unused Single Delete in BlobStoreRepository
There are no more production uses of the non-bulk delete or the delete that throws
on missing so this commit removes both these methods.
Only the bulk delete logic remains. Where the bulk delete was derived from single deletes,
the single delete code was inlined into the bulk delete method.
Where single delete was used in tests it was replaced by bulk deleting.
Multiple version ranges are allowed to be used in section skip in yml
tests. This is useful when a bugfix was backported to latest versions
and all previous releases contain a wire breaking bug.
examples:
6.1.0 - 6.3.0, 6.6.0 - 6.7.9, 7.0 -
- 7.2, 8.0.0 -
backport #50014
Step on the road to #49060.
This commit adds the logic to keep track of a repository's generation
across repository operations. See changes to package level Javadoc for the concrete changes in the distributed state machine.
It updates the write side of new repository generations to be fully consistent via the cluster state. With this change, no `index-N` will be overwritten for the same repository ever. So eventual consistency issues around conflicting updates to the same `index-N` are not a possibility any longer.
With this change the read side will still use listing of repository contents instead of relying solely on the cluster state contents.
The logic for that will be introduced in #49060. This retains the ability to externally delete the contents of a repository and continue using it afterwards for the time being. In #49060 the use of listing to determine the repository generation will be removed in all cases (except for full-cluster restart) as the last step in this effort.
In order to cache script results in the query shard cache, we need to
check if scripts are deterministic. This change adds a default method
to the script factories, `isResultDeterministic() -> false` which is
used by the `QueryShardContext`.
Script results were never cached and that does not change here. Future
changes will implement this method based on whether the results of the
scripts are deterministic or not and therefore cacheable.
Refs: #49466
**Backport**
Historically only two things happened in the final reduction:
empty buckets were filled, and pipeline aggs were reduced (since it
was the final reduction, this was safe). Usage of the final reduction
is growing however. Auto-date-histo might need to perform
many reductions on final-reduce to merge down buckets, CCS
may need to side-step the final reduction if sending to a
different cluster, etc
Having pipelines generate their output in the final reduce was
convenient, but is becoming increasingly difficult to manage
as the rest of the agg framework advances.
This commit decouples pipeline aggs from the final reduction by
introducing a new "top level" reduce, which should be called
at the beginning of the reduce cycle (e.g. from the SearchPhaseController).
This will only reduce pipeline aggs on the final reduce after
the non-pipeline agg tree has been fully reduced.
By separating pipeline reduction into their own set of methods,
aggregations are free to use the final reduction for whatever
purpose without worrying about generating pipeline results
which are non-reducible
Adds `GET /_script_language` to support Kibana dynamic scripting
language selection.
Response contains whether `inline` and/or `stored` scripts are
enabled as determined by the `script.allowed_types` settings.
For each scripting language registered, such as `painless`,
`expression`, `mustache` or custom, available contexts for the language
are included as determined by the `script.allowed_contexts` setting.
Response format:
```
{
"types_allowed": [
"inline",
"stored"
],
"language_contexts": [
{
"language": "expression",
"contexts": [
"aggregation_selector",
"aggs"
...
]
},
{
"language": "painless",
"contexts": [
"aggregation_selector",
"aggs",
"aggs_combine",
...
]
}
...
]
}
```
Fixes: #49463
**Backport**
* Copying the request is not necessary here. We can simply release it once the response has been generated and a lot of `Unpooled` allocations that way
* Relates #32228
* I think the issue that preventet that PR that PR from being merged was solved by #39634 that moved the bulk index marker search to ByteBuf bulk access so the composite buffer shouldn't require many additional bounds checks (I'd argue the bounds checks we add, we save when copying the composite buffer)
* I couldn't neccessarily reproduce much of a speedup from this change, but I could reproduce a very measureable reduction in GC time with e.g. Rally's PMC (4g heap node and bulk requests of size 5k saw a reduction in young GC time by ~10% for me)
This commit fixes a number of issues with data replication:
- Local and global checkpoints are not updated after the new operations have been fsynced, but
might capture a state before the fsync. The reason why this probably went undetected for so
long is that AsyncIOProcessor is synchronous if you index one item at a time, and hence working
as intended unless you have a high enough level of concurrent indexing. As we rely in other
places on the assumption that we have an up-to-date local checkpoint in case of synchronous
translog durability, there's a risk for the local and global checkpoints not to be up-to-date after
replication completes, and that this won't be corrected by the periodic global checkpoint sync.
- AsyncIOProcessor also has another "bad" side effect here: if you index one bulk at a time, the
bulk is always first fsynced on the primary before being sent to the replica. Further, if one thread
is tasked by AsyncIOProcessor to drain the processing queue and fsync, other threads can
easily pile more bulk requests on top of that thread. Things are not very fair here, and the thread
might continue doing a lot more fsyncs before returning (as the other threads pile more and
more on top), which blocks it from returning as a replication request (e.g. if this thread is on the
primary, it blocks the replication requests to the replicas from going out, and delaying
checkpoint advancement).
This commit fixes all these issues, and also simplifies the code that coordinates all the after
write actions.
This rewrites long sort as a `DistanceFeatureQuery`, which can
efficiently skip non-competitive blocks and segments of documents.
Depending on the dataset, the speedups can be 2 - 10 times.
The optimization can be disabled with setting the system property
`es.search.rewrite_sort` to `false`.
Optimization is skipped when an index has 50% or more data with
the same value.
Optimization is done through:
1. Rewriting sort as `DistanceFeatureQuery` which can
efficiently skip non-competitive blocks and segments of documents.
2. Sorting segments according to the primary numeric sort field(#44021)
This allows to skip non-competitive segments.
3. Using collector manager.
When we optimize sort, we sort segments by their min/max value.
As a collector expects to have segments in order,
we can not use a single collector for sorted segments.
We use collectorManager, where for every segment a dedicated collector
will be created.
4. Using Lucene's shared TopFieldCollector manager
This collector manager is able to exchange minimum competitive
score between collectors, which allows us to efficiently skip
the whole segments that don't contain competitive scores.
5. When index is force merged to a single segment, #48533 interleaving
old and new segments allows for this optimization as well,
as blocks with non-competitive docs can be skipped.
Backport for #48804
Co-authored-by: Jim Ferenczi <jim.ferenczi@elastic.co>
* Make BlobStoreRepository Aware of ClusterState (#49639)
This is a preliminary to #49060.
It does not introduce any substantial behavior change to how the blob store repository
operates. What it does is to add all the infrastructure changes around passing the cluster service to the blob store, associated test changes and a best effort approach to tracking the latest repository generation on all nodes from cluster state updates. This brings a slight improvement to the consistency
by which non-master nodes (or master directly after a failover) will be able to determine the latest repository generation. It does not however do any tricky checks for the situation after a repository operation
(create, delete or cleanup) that could theoretically be used to get even greater accuracy to keep this change simple.
This change does not in any way alter the behavior of the blobstore repository other than adding a better "guess" for the value of the latest repo generation and is mainly intended to isolate the actual logical change to how the
repository operates in #49060
This commit adds a function in NodeClient that allows to track the progress
of a search request locally. Progress is tracked through a SearchProgressListener
that exposes query and fetch responses as well as partial and final reduces.
This new method can be used by modules/plugins inside a node in order to track the
progress of a local search request.
Relates #49091
This change adds a dynamic cluster setting named `indices.id_field_data.enabled`.
When set to `false` any attempt to load the fielddata for the `_id` field will fail
with an exception. The default value in this change is set to `false` in order to prevent
fielddata usage on this field for future versions but it will be set to `true` when backporting
to 7x. When the setting is set to true (manually or by default in 7x) the loading will also issue
a deprecation warning since we want to disallow fielddata entirely when https://github.com/elastic/elasticsearch/issues/26472
is implemented.
Closes#43599
All the implementations of `EsBlobStoreTestCase` use the exact same
bootstrap code that is also used by their implementation of
`EsBlobStoreContainerTestCase`.
This means all tests might as well live under `EsBlobStoreContainerTestCase`
saving a lot of code duplication. Also, there was no HDFS implementation for
`EsBlobStoreTestCase` which is now automatically resolved by moving the tests over
since there is a HDFS implementation for the container tests.
Same as #49518 pretty much but for GCS.
Fixing a few more spots where input stream can get closed
without being fully drained and adding assertions to make sure
it's always drained.
Moved the no-close stream wrapper to production code utilities since
there's a number of spots in production code where it's also useful
(will reuse it there in a follow-up).
We do not guarantee that EngineTestCase#getDocIds is called after the
engine has been externally refreshed. Hence, we trip an assertion
assertSearcherIsWarmedUp.
CI: https://gradle-enterprise.elastic.co/s/pm2at5qmfm2iu
Relates #48605
This commit ensures that even for requests that are known to be empty body
we at least attempt to read one bytes from the request body input stream.
This is done to work around the behavior in `sun.net.httpserver.ServerImpl.Dispatcher#handleEvent`
that will close a TCP/HTTP connection that does not have the `eof` flag (see `sun.net.httpserver.LeftOverInputStream#isEOF`)
set on its input stream. As far as I can tell the only way to set this flag is to do a read when there's no more bytes buffered.
This fixes the numerous connection closing issues because the `ServerImpl` stops closing connections that it thinks
weren't fully drained.
Also, I removed a now redundant drain loop in the Azure handler as well as removed the connection closing in the error handler's
drain action (this shouldn't have an effect but makes things more predictable/easier to reason about IMO).
I would suggest merging this and closing related issue after verifying that this fixes things on CI.
The way to locally reproduce the issues we're seeing in tests is to make the retry timings more aggressive in e.g. the azure tests
and move them to single digit values. This makes the retries happen quickly enough that they run into the async connecting closing
of allegedly non-eof connections by `ServerImpl` and produces the exact kinds of failures we're seeing currently.
Relates #49401, #49429
If some replica is performing a file-based recovery, then the check
assertNoSnapshottedIndexCommit would fail. We should increase the
timeout for this check so that we can wait until all recoveries done
or aborted.
Closes#49403
Fixing a few small issues found in this code:
1. We weren't reading the request headers but the response headers when checking for blob existence in the mocked single upload path
2. Error code can never be `null` removed the dead code that resulted
3. In the logging wrapper we weren't checking for `Throwable` so any failing assertions in the http mock would not show up since they
run on a thread managed by the mock http server
Strengthens the validateClusterFormed check that is used by the test infrastructure to make
sure that nodes are properly connected and know about each other. Is used in situations where
the cluster is scaled up and down, and where there previously was a network disruption that has
been healed.
Closes#49243
While we log exception in the handler, we may still miss exceptions
hgiher up the execution chain. This adds logging of exceptions to all
operations on the IO loop including connection establishment.
Relates #49401
This commit fixes the server side logic of "List Objects" operations
of Azure and S3 fixtures. Until today, the fixtures were returning a "
flat" view of stored objects and were not correctly handling the
delimiter parameter. This causes some objects listing to be wrongly
interpreted by the snapshot deletion logic in Elasticsearch which
relies on the ability to list child containers of BlobContainer (#42653)
to correctly delete stale indices.
As a consequence, the blobs were not correctly deleted from the
emulated storage service and stayed in heap until they got garbage
collected, causing CI failures like #48978.
This commit fixes the server side logic of Azure and S3 fixture when
listing objects so that it now return correct common blob prefixes as
expected by the snapshot deletion process. It also adds an after-test
check to ensure that tests leave the repository empty (besides the
root index files).
Closes#48978
This commit changes the ThreadContext to just use a regular ThreadLocal
over the lucene CloseableThreadLocal. The CloseableThreadLocal solves
issues with ThreadLocals that are no longer needed during runtime but
in the case of the ThreadContext, we need it for the runtime of the
node and it is typically not closed until the node closes, so we miss
out on the benefits that this class provides.
Additionally by removing the close logic, we simplify code in other
places that deal with exceptions and tracking to see if it happens when
the node is closing.
Closes#42577
This API call in most implementations is fairly IO heavy and slow
so it is more natural to be async in the first place.
Concretely though, this change is a prerequisite of #49060 since
determining the repository generation from the cluster state
introduces situations where this call would have to wait for other
operations to finish. Doing so in a blocking manner would break
`SnapshotResiliencyTests` and waste a thread.
Also, this sets up the possibility to in the future make use of async IO
where provided by the underlying Repository implementation.
In a follow-up `SnapshotsService#getRepositoryData` will be made async
as well (did not do it here, since it's another huge change to do so).
Note: This change for now does not alter the threading behaviour in any way (since `Repository#getRepositoryData` isn't forking) and is purely mechanical.
Make queries on the “_index” field fast-fail if the target shard is an index that doesn’t match the query expression. Part of the “canMatch” phase optimisations.
Closes#48473
ESIntegTestCase has logic to clean up static fields in a method
annotated with `@AfterClass` so that these fields do not trigger the
StaticFieldsInvariantRule. However, during the exceptional close of the
test cluster, this cleanup can be missed. The StaticFieldsInvariantRule
always runs and will attempt to inspect the size of the static fields
that were not cleaned up. If the `currentCluster` field of
ESIntegTestCase references an InternalTestCluster, this could hold a
reference to an implementation of a `Path` that comes from the
`sun.nio.fs` package, which the security manager will deny access to.
This casues additional noise to be generated since the
AccessControlException will cause the StaticFieldsInvariantRule to fail
and also be reported along with the actual exception that occurred.
This change clears the static fields of ESIntegTestCase in a finally
block inside the `@AfterClass` method to prevent this unnecessary noise.
Closes#41526
Backport of #48849. Update `.editorconfig` to make the Java settings the
default for all files, and then apply a 2-space indent to all `*.gradle`
files. Then reformat all the files.
When a node shuts down, `TransportService` moves to stopped state and
then closes connections. If a request is done in between, an exception
was thrown that was not retried in replication actions. Now throw a
wrapped `NodeClosedException` exception instead, which is correctly
handled in replication action. Fixed other usages too.
Relates #42612
Ensures that we always use the primary term established by the primary to index docs on the
replica. Makes the logic around replication less brittle by always using the operation primary
term on the replica that is coming from the primary.
This commit changes the ESMockAPIBasedRepositoryIntegTestCase so
that HttpHandler are now wrapped in order to log any exceptions that
could be thrown when executing the server side logic in repository
integration tests.
This commits sends the cluster name and discovery naode in the transport
level handshake response. This will allow us to stop sending the
transport service level handshake request in the 8.0-8.x release cycle.
It is necessary to start sending this in 7.x so that 8.0 is guaranteed
to be communicating with a version that sends the required information.
The realtime GET API currently has erratic performance in case where a document is accessed
that has just been indexed but not refreshed yet, as the implementation will currently force an
internal refresh in that case. Refreshing can be an expensive operation, and also will block the
thread that executes the GET operation, blocking other GETs to be processed. In case of
frequent access of recently indexed documents, this can lead to a refresh storm and terrible
GET performance.
While older versions of Elasticsearch (2.x and older) did not trigger refreshes and instead opted
to read from the translog in case of realtime GET API or update API, this was removed in 5.0
(#20102) to avoid inconsistencies between values that were returned from the translog and
those returned by the index. This was partially reverted in 6.3 (#29264) to allow _update and
upsert to read from the translog again as it was easier to guarantee consistency for these, and
also brought back more predictable performance characteristics of this API. Calls to the realtime
GET API, however, would still always do a refresh if necessary to return consistent results. This
means that users that were calling realtime GET APIs to coordinate updates on client side
(realtime GET + CAS for conditional index of updated doc) would still see very erratic
performance.
This PR (together with #48707) resolves the inconsistencies between reading from translog and
index. In particular it fixes the inconsistencies that happen when requesting stored fields, which
were not available when reading from translog. In case where stored fields are requested, this
PR will reparse the _source from the translog and derive the stored fields to be returned. With
this, it changes the realtime GET API to allow reading from the translog again, avoid refresh
storms and blocking the GET threadpool, and provide overall much better and predictable
performance for this API.
We should not open new engines if a shard is closed. We break this
assumption in #45263 where we stop verifying the shard state before
creating an engine but only before swapping the engine reference.
We can fail to snapshot the store metadata or checkIndex a closed shard
if there's some IndexWriter holding the index lock.
Closes#47060
CCR follower stats can return information for persistent tasks that are in the process of being cleaned up. This is problematic for tests where CCR follower indices have been deleted, but their persistent follower task is only cleaned up asynchronously afterwards. If one of the following tests then accesses the follower stats, it might still get the stats for that follower task.
In addition, some tests were not cleaning up their auto-follow patterns, leaving orphaned patterns behind. Other tests cleaned up their auto-follow patterns. As always the same name was used, it just depended on the test execution order whether this led to a failure or not. This commit fixes the offensive tests, and will also automatically remove auto-follow-patterns at the end of tests, like we do for many other features.
Closes #48700
In repository integration tests, we drain the HTTP request body before
returning a response. Before this change this operation was done using
Streams.readFully() which uses a 8kb buffer to read the input stream, it
now uses a 1kb for the same operation. This should reduce the allocations
made during the tests and speed them up a bit on CI.
Co-authored-by: Armin Braun <me@obrown.io>
Backport of #48452.
The SAML tests have large XML documents within which various parameters
are replaced. At present, if these test are auto-formatted, the XML
documents get strung out over many, many lines, and are basically
illegible.
Fix this by using named placeholders for variables, and indent the
multiline XML documents.
The tests in `SamlSpMetadataBuilderTests` deserve a special mention,
because they include a number of certificates in Base64. I extracted
these into variables, for additional legibility.
* Extract remote "sniffing" to connection strategy (#47253)
Currently the connection strategy used by the remote cluster service is
implemented as a multi-step sniffing process in the
RemoteClusterConnection. We intend to introduce a new connection strategy
that will operate in a different manner. This commit extracts the
sniffing logic to a dedicated strategy class. Additionally, it implements
dedicated tests for this class.
Additionally, in previous commits we moved away from a world where the
remote cluster connection was mutable. Instead, when setting updates are
made, the connection is torn down and rebuilt. We still had methods and
tests hanging around for the mutable behavior. This commit removes those.
* Introduce simple remote connection strategy (#47480)
This commit introduces a simple remote connection strategy which will
open remote connections to a configurable list of user supplied
addresses. These addresses can be remote Elasticsearch nodes or
intermediate proxies. We will perform normal clustername and version
validation, but otherwise rely on the remote cluster to route requests
to the appropriate remote node.
* Make remote setting updates support diff strategies (#47891)
Currently the entire remote cluster settings infrastructure is designed
around the sniff strategy. As we introduce an additional conneciton
strategy this infrastructure needs to be modified to support it. This
commit modifies the code so that the strategy implementations will tell
the service if the connection needs to be torn down and rebuilt.
As part of this commit, we will wait 10 seconds for new clusters to
connect when they are added through the "update" settings
infrastructure.
* Make remote setting updates support diff strategies (#47891)
Currently the entire remote cluster settings infrastructure is designed
around the sniff strategy. As we introduce an additional conneciton
strategy this infrastructure needs to be modified to support it. This
commit modifies the code so that the strategy implementations will tell
the service if the connection needs to be torn down and rebuilt.
As part of this commit, we will wait 10 seconds for new clusters to
connect when they are added through the "update" settings
infrastructure.
BytesReference is currently an abstract class which is extended by
various implementations. This makes it very difficult to use the
delegation pattern. The implication of this is that our releasable
BytesReference is a PagedBytesReference type and cannot be used as a
generic releasable bytes reference that delegates to any reference type.
This commit makes BytesReference an interface and introduces an
AbstractBytesReference for common functionality.
Brings handling of out of bounds points in linestrings in line with
points. Now points with latitude above 90 and below -90 are handled
the same way as for points by adjusting the longitude by moving it by
180 degrees.
Relates to #43916
This change adds a new field `"shards"` to `RepositoryData` that contains a mapping of `IndexId` to a `String[]`. This string array can be accessed by shard id to get the generation of a shard's shard folder (i.e. the `N` in the name of the currently valid `/indices/${indexId}/${shardId}/index-${N}` for the shard in question).
This allows for creating a new snapshot in the shard without doing any LIST operations on the shard's folder. In the case of AWS S3, this saves about 1/3 of the cost for updating an empty shard (see #45736) and removes one out of two remaining potential issues with eventually consistent blob stores (see #38941 ... now only the root `index-${N}` is determined by listing).
Also and equally if not more important, a number of possible failure modes on eventually consistent blob stores like AWS S3 are eliminated by moving all delete operations to the `master` node and moving from incremental naming of shard level index-N to uuid suffixes for these blobs.
This change moves the deleting of the previous shard level `index-${uuid}` blob to the master node instead of the data node allowing for a safe and consistent update of the shard's generation in the `RepositoryData` by first updating `RepositoryData` and then deleting the now unreferenced `index-${newUUID}` blob.
__No deletes are executed on the data nodes at all for any operation with this change.__
Note also: Previous issues with hanging data nodes interfering with master nodes are completely impossible, even on S3 (see next section for details).
This change changes the naming of the shard level `index-${N}` blobs to a uuid suffix `index-${UUID}`. The reason for this is the fact that writing a new shard-level `index-` generation blob is not atomic anymore in its effect. Not only does the blob have to be written to have an effect, it must also be referenced by the root level `index-N` (`RepositoryData`) to become an effective part of the snapshot repository.
This leads to a problem if we were to use incrementing names like we did before. If a blob `index-${N+1}` is written but due to the node/network/cluster/... crashes the root level `RepositoryData` has not been updated then a future operation will determine the shard's generation to be `N` and try to write a new `index-${N+1}` to the already existing path. Updates like that are problematic on S3 for consistency reasons, but also create numerous issues when thinking about stuck data nodes.
Previously stuck data nodes that were tasked to write `index-${N+1}` but got stuck and tried to do so after some other node had already written `index-${N+1}` were prevented form doing so (except for on S3) by us not allowing overwrites for that blob and thus no corruption could occur.
Were we to continue using incrementing names, we could not do this. The stuck node scenario would either allow for overwriting the `N+1` generation or force us to continue using a `LIST` operation to figure out the next `N` (which would make this change pointless).
With uuid naming and moving all deletes to `master` this becomes a non-issue. Data nodes write updated shard generation `index-${uuid}` and `master` makes those `index-${uuid}` part of the `RepositoryData` that it deems correct and cleans up all those `index-` that are unused.
Co-authored-by: Yannick Welsch <yannick@welsch.lu>
Co-authored-by: Tanguy Leroux <tlrx.dev@gmail.com>
The code here was needlessly complicated when it
enqueued all file uploads up-front. Instead, we can
go with a cleaner worker + queue pattern here by taking
the max-parallelism from the threadpool info.
Also, I slightly simplified the rethrow and
listener (step listener is pointless when you add the callback in the next line)
handling it since I noticed that we were needlessly rethrowing in the same
code and that wasn't worth a separate PR.
The test FW has a method to check that it's implementation of getting
index and wire compatible versions as well as reasoning about which
version is released or not produces the same rezults as the simillar
implementation in the build.
This PR adds the `verifyVersions` task to the test FW so we have one
task to check everything related to versions.
Especially in the snapshot code there's a lot
of logic chaining `ActionRunnables` in tricky
ways now and the code is getting hard to follow.
This change introduces two convinience methods that
make it clear that a wrapped listener is invoked with
certainty in some trickier spots and shortens the code a bit.
* Bwc testclusters all (#46265)
Convert all bwc projects to testclusters
* Fix bwc versions config
* WIP fix rolling upgrade
* Fix bwc tests on old versions
* Fix rolling upgrade
While function scores using scripts do allow explanations, they are only
creatable with an expert plugin. This commit improves the situation for
the newer script score query by adding the ability to set the
explanation from the script itself.
To set the explanation, a user would check for `explanation != null` to
indicate an explanation is needed, and then call
`explanation.set("some description")`.
Today we control the extra translog (when soft-deletes is disabled) for
peer recoveries by size and age. If users manually (force) flush many
times within a short period, we can keep many small (or empty) translog
files as neither the size or age condition is reached. We can protect
the cluster from running out of the file descriptors in such a situation
by limiting the number of retaining translog files.
Changes auto-id index requests to use optype CREATE, making it compliant with our docs.
This will also make these auto-id index requests compatible with the new "create-doc" index
privilege (which is based on the optype), the default optype is changed to create, just as it is
already documented.
This commit change the repositories base paths used in Azure/S3/GCS
integration tests so that they don't conflict with each other when tests
run in parallel on real storage services.
Closes#47202
As a result of #45689 snapshot finalization started to
take significantly longer than before. This may be a
little unfortunate since it increases the likelihood
of failing to finalize after having written out all
the segment blobs.
This change parallelizes all the metadata writes that
can safely run in parallel in the finalization step to
speed the finalization step up again. Also, this will
generally speed up the snapshot process overall in case
of large number of indices.
This is also a nice to have for #46250 since we add yet
another step (deleting of old index- blobs in the shards
to the finalization.
Backport of #45794 to 7.x. Convert most `awaitBusy` calls to
`assertBusy`, and use asserts where possible. Follows on from #28548 by
@liketic.
There were a small number of places where it didn't make sense to me to
call `assertBusy`, so I kept the existing calls but renamed the method to
`waitUntil`. This was partly to better reflect its usage, and partly so
that anyone trying to add a new call to awaitBusy wouldn't be able to find
it.
I also didn't change the usage in `TransportStopRollupAction` as the
comments state that the local awaitBusy method is a temporary
copy-and-paste.
Other changes:
* Rework `waitForDocs` to scale its timeout. Instead of calling
`assertBusy` in a loop, work out a reasonable overall timeout and await
just once.
* Some tests failed after switching to `assertBusy` and had to be fixed.
* Correct the expect templates in AbstractUpgradeTestCase. The ES
Security team confirmed that they don't use templates any more, so
remove this from the expected templates. Also rewrite how the setup
code checks for templates, in order to give more information.
* Remove an expected ML template from XPackRestTestConstants The ML team
advised that the ML tests shouldn't be waiting for any
`.ml-notifications*` templates, since such checks should happen in the
production code instead.
* Also rework the template checking code in `XPackRestTestHelper` to give
more helpful failure messages.
* Fix issue in `DataFrameSurvivesUpgradeIT` when upgrading from < 7.4
Currently the MockNioTransport uses a custom exception handler for
server channel exceptions. This means that bind failures are logged at
the warn level. This commit modifies the transport to use the common
TcpTransport exception handler which will log exceptions at the correct
level.
We disable MSU optimization if the local checkpoint is smaller than
max_seq_no_of_updates. Hence, we need to relax the MSU assertion in
FollowingEngine for that scenario. Suppose the leader has three
operations: index-0, delete-1, and index-2 for the same doc Id. MSU on
the leader is 1 as index-2 is an append. If the follower applies index-0
then index-2, then the assertion is violated.
Closes#47137
The Azure SDK client expects server errors to have a body,
something that looks like:
<?xml version="1.0" encoding="utf-8"?>
<Error>
<Code>string-value</Code>
<Message>string-value</Message>
</Error>
I've forgot to add such errors in Azure tests and that triggers
some NPE in the client like the one reported in #47120.
Closes#47120
Today if metadata persistence is excessively slow on a master-ineligible node
then the `ClusterApplierService` emits a warning indicating that the
`GatewayMetaState` applier was slow, but gives no further details. If it is
excessively slow on a master-eligible node then we do not see any warning at
all, although we might see other consequences such as a lagging node or a
master failure.
With this commit we emit a warning if metadata persistence takes longer than a
configurable threshold, which defaults to `10s`. We also emit statistics that
record how much index metadata was persisted and how much was skipped since
this can help distinguish cases where IO was slow from cases where there are
simply too many indices involved.
Backport of #47005.
Currently the logic to check if a connection to a remote discovery node
exists and otherwise create a proxy connection is mixed with the
collect nodes, cluster connection lifecycle, and other
RemoteClusterConnection logic. This commit introduces a specialized
RemoteConnectionManager class which handles the open connections.
Additionally, it reworks the "round-robin" proxy logic to create the list
of potential connections at connection open/close time, opposed to each
time a connection is requested.
Today we log and swallow exceptions during cluster state application, but such
an exception should not occur. This commit adds assertions of this fact, and
updates the Javadocs to explain it.
Relates #47038
Currently in production instances of Elasticsearch we set a couple of
system properties by default. We currently do not apply all of these
system properties in tests. This commit applies these properties in the
tests.
Today `GatewayMetaState` implements `PersistedState` but it's an error to use
it as a `PersistedState` before it's been started, or if the node is
master-ineligible. It also holds some fields that are meaningless on nodes that
do not persist their states. Finally, it takes responsibility for both loading
the original cluster state and some of the high-level logic for writing the
cluster state back to disk.
This commit addresses these concerns by introducing a more specific
`PersistedState` implementation for use on master-eligible nodes which is only
instantiated if and when it's appropriate. It also moves the fields and
high-level persistence logic into a new `IncrementalClusterStateWriter` with a
more appropriate lifecycle.
Follow-up to #46326 and #46532
Relates #47001
Previously, queries on the _index field were not able to specify index aliases.
This was a regression in functionality compared to the 'indices' query that was
deprecated and removed in 6.0.
Now queries on _index can specify an alias, which is resolved to the concrete
index names when we check whether an index matches. To match a remote shard
target, the pattern needs to be of the form 'cluster:index' to match the
fully-qualified index name. Index aliases can be specified in the following query
types: term, terms, prefix, and wildcard.
This commit replaces the SearchContext used in AbstractQueryTestCase with
a QueryShardContext in order to reduce the visibility of search contexts.
Relates #46523
API spec now use an object for the documentation field. _common was not updated yet. This commit updates _common.json and its corresponding parser.
Closes#46744
Co-Authored-By: Tomas Della Vedova <delvedor@users.noreply.github.com>
When using auto-generated IDs + the ingest drop processor (which looks to be used by filebeat
as well) + coordinating nodes that do not have the ingest processor functionality, this can lead
to a NullPointerException.
The issue is that markCurrentItemAsDropped() is creating an UpdateResponse with no id when
the request contains auto-generated IDs. The response serialization is lenient for our
REST/XContent format (i.e. we will send "id" : null) but the internal transport format (used for
communication between nodes) assumes for this field to be non-null, which means that it can't
be serialized between nodes. Bulk requests with ingest functionality are processed on the
coordinating node if the node has the ingest capability, and only otherwise sent to a different
node. This means that, in order to reproduce this, one needs two nodes, with the coordinating
node not having the ingest functionality.
Closes#46678
This adds an assert to make sure we're not leaking
index-N blobs on the shard level to the repo consistency checks.
It is ok to have a single redundant index-N blob in a failure scenario
but additional index-N should always be cleaned up before adding more.
This commit adds support for resumable uploads to the internal HTTP
server used in GoogleCloudStorageBlobStoreRepositoryTests. This
way we can also test the behavior of the Google's client when the
service returns server errors in response to resumable upload requests.
The BlobStore implementation for GCS has the choice between 2
methods to upload a blob: resumable and multipart. In the current
implementation, the client executes a resumable upload if the blob
size is larger than LARGE_BLOB_THRESHOLD_BYTE_SIZE,
otherwise it executes a multipart upload. This commit makes this
logic overridable in tests, allowing to randomize the decision of
using one method or the other.
The commit add support for single request resumable uploads
and chunked resumable uploads (the blob is uploaded into multiple
2Mb chunks; each chunk being a resumable upload). For this last
case, this PR also adds a test testSnapshotWithLargeSegmentFiles
which makes it more probable that a chunked resumable upload is
executed.
Reenable this test since it was fixed by #45689 in production
code (specifically, the fact that we write the `snap-` blobs
without overwrite checks now).
Only required adding the assumed blocking on index file writes
to test code to properly work again.
* Closes#25281
There were some issues with the Azure implementation requiring
permissions to list all containers ue to a container exists
check. This was caught in CI this time, but going forward we
should ensure that CI is executed using a token that does not
allow listing containers.
Relates #43288
* Write metadata during snapshot finalization after segment files to prevent outdated metadata in case of dynamic mapping updates as explained in #41581
* Keep the old behavior of writing the metadata beforehand in the case of mixed version clusters for BwC reasons
* Still overwrite the metadata in the end, so even a mixed version cluster is fixed by this change if a newer version master does the finalization
* Fixes#41581
There's nothing wrong in the logs from these failures. I think 30
seconds might not be enough to relocate shards with many documents as CI
is quite slow. This change increases the timeout to 60 seconds for these
relocation tests. It also dumps the hot threads in case of timed out.
Closes#46526Closes#46439
This change delays the creation of the SubSearchContext for nested and parent/child inner_hits
to the fetch sub phase in order to ensure that a SearchContext can built entirely from a
QueryShardContext. This commit also adds a validation step to the inner hits builder that ensures that we fail the request early if the inner hits path is invalid.
Relates #46523
This commit replaces the `SearchContext` with the `QueryShardContext` when building aggregator factories. Aggregator factories are part of the `SearchContext` so they shouldn't require a `SearchContext` to create them.
The main changes here are the signatures of `AggregationBuilder#build` that now takes a `QueryShardContext` and `AggregatorFactory#createInternal` that passes the `SearchContext` to build the `Aggregator`.
Relates #46523
* More Efficient Ordering of Shard Upload Execution (#42791)
* Change the upload order of of snapshots to work file by file in parallel on the snapshot pool instead of merely shard-by-shard
* Inspired by #39657
* Cleanup BlobStoreRepository Abort and Failure Handling (#46208)
This change adds an IndexSearcher and the node's BigArrays in the QueryShardContext.
It's a spin off of #46527 as this change is required to allow aggregation builder to solely use the
query shard context.
Relates #46523
Today we load the metadata from disk while constructing the node. However there
is no real need to do so, and this commit moves that code to run later while
the node is starting instead.
We are seeing requests take more than the default 30s
which leads to requests being retried and returning
unexpected failures like e.g. "index already exists"
because the initial requests that timed out, worked
out functionally anyway.
=> double the timeout to reduce the likelihood of
the failures described in #46091
=> As suggested in the issue, we should in a follow-up
turn off retrying all-together probably
This commit removes the usage of MockGoogleCloudStoragePlugin in
GoogleCloudStorageBlobStoreRepositoryTests and replaces it by a
HttpServer that emulates the Storage service. This allows the repository
tests to use the real Google's client under the hood in tests and will allow
us to test the behavior of the snapshot/restore feature for GCS repositories
by simulating random server-side internal errors.
The HTTP server used to emulate the Storage service is intentionally simple
and minimal to keep things understandable and maintainable. Testing full
client options on the server side (like authentication, chunked encoding
etc) remains the responsibility of the GoogleCloudStorageFixture.
Today the `DiskThresholdDecider` attempts to account for already-relocating
shards when deciding how to allocate or relocate a shard. Its goal is to stop
relocating shards onto a node before that node exceeds the low watermark, and
to stop relocating shards away from a node as soon as the node drops below the
high watermark.
The decider handles multiple data paths by only accounting for relocating
shards that affect the appropriate data path. However, this mechanism does not
correctly account for _new_ relocating shards, which are unwittingly ignored.
This means that we may evict far too many shards from a node above the high
watermark, and may relocate far too many shards onto a node causing it to blow
right past the low watermark and potentially other watermarks too.
There are in fact two distinct issues that this PR fixes. New incoming shards
have an unknown data path until the `ClusterInfoService` refreshes its
statistics. New outgoing shards have a known data path, but we fail to account
for the change of the corresponding `ShardRouting` from `STARTED` to
`RELOCATING`, meaning that we fail to find the correct data path and treat the
path as unknown here too.
This PR also reworks the `MockDiskUsagesIT` test to avoid using fake data paths
for all shards. With the changes here, the data paths are handled in tests as
they are in production, except that their sizes are fake.
Fixes#45177
AbstractSimpleTransportTestCase.testTransportProfilesWithPortAndHost
expects a host to only have a single IPv4 loopback address, which isn't
necessarily the case. Allow for >= 1 address.
Backport of #45901.
We recently added a check to `ESIntegTestCase` in order to verify that
no http channels are being tracked when we close clusters and the
REST client. Close listeners though are invoked asynchronously, hence
this check may fail if we assert before the close listener that removes
the channel from the map is invoked.
With this commit we add an `assertBusy` so we try and wait for the map
to be empty.
Closes#45914Closes#45955
Today we create new engines under IndexShard#mutex. This is not ideal
because it can block the cluster state updates which also execute under
the same mutex. We can avoid this problem by creating new engines under
a separate mutex.
Closes#43699
This commit namespaces the existing processors setting under the "node"
namespace. In doing so, we deprecate the existing processors setting in
favor of node.processors.
In internal test clusters tests we check that wiping all indices was acknowledged
but in REST tests we didn't.
This aligns the behavior in both kinds of tests.
Relates #45605 which might be caused by unacked deletes that were just slow.
This PR introduces a mechanism to cancel a search task when its corresponding connection gets closed. That would relief users from having to manually deal with tasks and cancel them if needed. Especially the process of finding the task_id requires calling get tasks which needs to call every node in the cluster.
The implementation is based on associating each http channel with its currently running search task, and cancelling the task when the previously registered close listener gets called.
* It appears this test that is specific to how the BSD network stack works
does randomly fail on Windows => disabling it since it's not clear that it
should work on Windows in a stable way
* Fixes#45777
Most of our CLI tools use the Terminal class, which previously did not provide methods for writing to standard output. When all output goes to standard out, there are two basic problems. First, errors and warnings are "swallowed" in pipelines, making it hard for a user to know when something's gone wrong. Second, errors and warnings are intermingled with legitimate output, making it difficult to pass the results of interactive scripts to other tools.
This commit adds a second set of print commands to Terminal for printing to standard error, with errorPrint corresponding to print and errorPrintln corresponding to println. This leaves it to developers to decide which output should go where. It also adjusts existing commands to send errors and warnings to stderr.
Usage is printed to standard output when it's correctly requested (e.g., bin/elasticsearch-keystore --help) but goes to standard error when a command is invoked incorrectly (e.g. bin/elasticsearch-keystore list-with-a-typo | sort).
* Repository Cleanup Endpoint (#43900)
* Snapshot cleanup functionality via transport/REST endpoint.
* Added all the infrastructure for this with the HLRC and node client
* Made use of it in tests and resolved relevant TODO
* Added new `Custom` CS element that tracks the cleanup logic.
Kept it similar to the delete and in progress classes and gave it
some (for now) redundant way of handling multiple cleanups but only allow one
* Use the exact same mechanism used by deletes to have the combination
of CS entry and increment in repository state ID provide some
concurrency safety (the initial approach of just an entry in the CS
was not enough, we must increment the repository state ID to be safe
against concurrent modifications, otherwise we run the risk of "cleaning up"
blobs that just got created without noticing)
* Isolated the logic to the transport action class as much as I could.
It's not ideal, but we don't need to keep any state and do the same
for other repository operations
(like getting the detailed snapshot shard status)
Adjusts the cluster cleanup routine in ESRestTestCase to clean up SLM
test cases, and optionally wait for all snapshots to be deleted.
Waiting for all snapshots to be deleted, rather than failing if any are
in progress, is necessary for tests which use SLM policies because SLM
policies may be in the process of executing when the test ends.
Changes the order of parameters in Geometries from lat, lon to lon, lat
and moves all Geometry classes are moved to the
org.elasticsearch.geomtery package.
Backport of #45332Closes#45048
* Update the REST API specification
This patch updates the REST API spefication in JSON files to better encode deprecated entities,
to improve specification of URL paths, and to open up the schema for future extensions.
Notably, it changes the `paths` from a list of strings to a list of objects, where each
particular object encodes all the information for this particular path: the `parts` and the `methods`.
Among the benefits of this approach is eg. encoding the difference between using the `PUT` and `POST`
methods in the Index API, to either use a specific document ID, or let Elasticsearch generate one.
Also `documentation` becomes an object that supports an `url` and also a `description` which is a
new field.
* Adapt YAML runner to new REST API specification format
The logic for choosing the path to use when running tests has been
simplified, as a consequence of the path parts being listed under each
path in the spec. The special case for create and index has been removed.
Also the parsing code has been hardened so that errors are thrown earlier
when the structure of the spec differs from what expected, and their
error messages should be more helpful.
Moves methods added in #44213 and uses them to configure the port range
for `ExternalTestCluster` too.
These were still using `9300-9400` ( teh default ) and running into
races.
* Introduce Spatial Plugin (#44389)
Introduce a skeleton Spatial plugin that holds new licensed features coming to
Geo/Spatial land!
* [GEO] Refactor DeprecatedParameters in AbstractGeometryFieldMapper (#44923)
Refactor DeprecatedParameters specific to legacy geo_shape out of
AbstractGeometryFieldMapper.TypeParser#parse.
* [SPATIAL] New ShapeFieldMapper for indexing cartesian geometries (#44980)
Add a new ShapeFieldMapper to the xpack spatial module for
indexing arbitrary cartesian geometries using a new field type called shape.
The indexing approach leverages lucene's new XYShape field type which is
backed by BKD in the same manner as LatLonShape but without the WGS84
latitude longitude restrictions. The new field mapper builds on and
extends the refactoring effort in AbstractGeometryFieldMapper and accepts
shapes in either GeoJSON or WKT format (both of which support non geospatial
geometries).
Tests are provided in the ShapeFieldMapperTest class in the same manner
as GeoShapeFieldMapperTests and LegacyGeoShapeFieldMapperTests.
Documentation for how to use the new field type and what parameters are
accepted is included. The QueryBuilder for searching indexed shapes is
provided in a separate commit.
* [SPATIAL] New ShapeQueryBuilder for querying indexed cartesian geometry (#45108)
Add a new ShapeQueryBuilder to the xpack spatial module for
querying arbitrary Cartesian geometries indexed using the new shape field
type.
The query builder extends AbstractGeometryQueryBuilder and leverages the
ShapeQueryProcessor added in the previous field mapper commit.
Tests are provided in ShapeQueryTests in the same manner as
GeoShapeQueryTests and docs are updated to explain how the query works.
We should not hold Engine#writeLock while executing
assertConsistentHistoryBetweenTranslogAndLuceneIndex
for this check might acquire Engine#readLock.
Relates #45461
We should capture max_seq_no after snapshotting translog and Lucene;
otherwise, that max_seq_no can be smaller some operation in translog or
Lucene. With this change, we also hold the Engine#writeLock during this
check so that no indexing can happen.
Closes#45454
Today, if an operation-based peer recovery occurs, we won't trim
translog but leave it as is. Some unacknowledged operations existing in
translog of that replica might suddenly reappear when it gets promoted.
With this change, we ensure trimming translog above the starting
sequence number of phase 2. This change can allow us to read translog
forward.
Today if a shard is not fully allocated we maintain a retention lease for a
lost peer for up to 12 hours, retaining all operations that occur in that time
period so that we can recover this replica using an operations-based recovery
if it returns. However it is not always reasonable to perform an
operations-based recovery on such a replica: if the replica is a very long way
behind the rest of the replication group then it can be much quicker to perform
a file-based recovery instead.
This commit introduces a notion of "reasonable" recoveries. If an
operations-based recovery would involve copying only a small number of
operations, but the index is large, then an operations-based recovery is
reasonable; on the other hand if there are many operations to copy across and
the index itself is relatively small then it makes more sense to perform a
file-based recovery. We measure the size of the index by computing its number
of documents (including deleted documents) in all segments belonging to the
current safe commit, and compare this to the number of operations a lease is
retaining below the local checkpoint of the safe commit. We consider an
operations-based recovery to be reasonable iff it would involve replaying at
most 10% of the documents in the index.
The mechanism for this feature is to expire peer-recovery retention leases
early if they are retaining so much history that an operations-based recovery
using that lease would be unreasonable.
Relates #41536
Elasticsearch does not grant Netty reflection access to get Unsafe. The
only mechanism that currently exists to free direct buffers in a timely
manner is to use Unsafe. This leads to the occasional scenario, under
heavy network load, that direct byte buffers can slowly build up without
being freed.
This commit disables Netty direct buffer pooling and moves to a strategy
of using a single thread-local direct buffer for interfacing with sockets.
This will reduce the memory usage from networking. Elasticsearch
currently derives very little value from direct buffer usage (TLS,
compression, Lucene, Elasticsearch handling, etc all use heap bytes). So
this seems like the correct trade-off until that changes.
Adds a tighter threshold for logging a warning about slowness in the
`MasterService` instead of relying on the cluster service's 30-second warning
threshold. This new threshold applies to the computation of the cluster state
update in isolation, so we get a warning if computing a new cluster state
update takes longer than 10 seconds even if it is subsequently applied quickly.
It also applies independently to the length of time it takes to notify the
cluster state tasks on completion of publication, in case any of these
notifications holds up the master thread for too long.
Relates #45007
Backport of #45086
This commit applies a normalization process to environment paths, both
in how they are stored internally, also their settings values. This
normalization is done via two means:
- we make the paths absolute
- we remove redundant name elements from the path (what Java calls
"normalization")
This change ensures that when we compare and refer to these paths within
the system, we are using a common ground. For example, prior to the
change if the data path was relative, we would not compare it correctly
to paths from disk usage. This is because the paths in disk usage were
being made absolute.
Uses JDK 11's per-socket configuration of TCP keepalive (supported on Linux and Mac), see
https://bugs.openjdk.java.net/browse/JDK-8194298, and exposes these as transport settings.
By default, these options are disabled for now (i.e. fall-back to OS behavior), but we would like
to explore whether we can enable them by default, in particular to force keepalive configurations
that are better tuned for running ES.
This adjusts the `buckets_path` parser so that pipeline aggs can
select specific buckets (via their bucket keys) instead of fetching
the entire set of buckets. This is useful for bucket_script in
particular, which might want specific buckets for calculations.
It's possible to workaround this with `filter` aggs, but the workaround
is hacky and probably less performant.
- Adjusts documentation
- Adds a barebones AggregatorTestCase for bucket_script
- Tweaks AggTestCase to use getMockScriptService() for reductions and
pipelines. Previously pipelines could just pass in a script service
for testing, but this didnt work for regular aggs. The new
getMockScriptService() method fixes that issue, but needs to be used
for pipelines too. This had a knock-on effect of touching MovFn,
AvgBucket and ScriptedMetric
Currently in the transport-nio work we connect and bind channels on the
a thread before the channel is registered with a selector. Additionally,
it is at this point that we set all the socket options. This commit
moves these operations onto the event-loop after the channel has been
registered with a selector. It attempts to set the socket options for a
non-server channel at registration time. If that fails, it will attempt
to set the options after the channel is connected. This should fix
#41071.
Today we recover a replica by copying operations from the primary's translog.
However we also retain some historical operations in the index itself, as long
as soft-deletes are enabled. This commit adjusts peer recovery to use the
operations in the index for recovery rather than those in the translog, and
ensures that the replication group retains enough history for use in peer
recovery by means of retention leases.
Reverts #38904 and #42211
Relates #41536
Backport of #45136 to 7.x.
* Stop Passing Around REST Request in Multiple Spots
* Motivated by #44564
* We are currently passing the REST request object around to a large number of places. This works fine since we simply copy the full request content before we handle the rest itself which is needlessly hard on GC and heap.
* This PR removes a number of spots where the request is passed around needlessly. There are many more spots to optimize in follow-ups to this, but this one would already enable bypassing the request copying for some error paths in a follow up.
Adds a `waitForEvents(Priority.LANGUID)` to the cluster health request in
`ESIntegTestCase#waitForRelocation()` to deal with the case that this health
request returns successfully despite the fact that there is a pending reroute task which
will relocate another shard.
Relates #44433Fixes#45003
* Create S3 Third Party Test Task that Covers the S3 CLI Tool
* Adjust snapshot cli test tool tests to work with real S3
* Build adjustment
* Clean up repo path before testing
* Dedup the logic for asserting path contents by using the correct utility method here that somehow became unused
Today closing a `ClusterNode` in an `AbstractCoordinatorTestCase` uses
`onNode()` so has no effect if the node is not in the current list of nodes.
It also discards the `Runnable` it creates without having run it, so has no
effect anyway.
This commit makes these tests much stricter about properly closing the nodes
started during `Coordinator` tests, by tracking the persisted states that are
opened, and adds an assertion to catch the trappy requirement that the closing
node still belongs to the cluster.
Replaying operations from the local translog must never fail as those
operations were processed successfully on the primary before and the
mapping is up to update already. This change removes leniency during
resetting engine from translog in IndexShard and InternalEngine.
We currently block the transport thread on startup, which has caused test failures. I think this is
some kind of deadlock situation. I don't think we should even block a transport thread, and
there's also no need to do so. We can just reject requests as long we're not fully set up. Note
that the HTTP layer is only started much later (after we've completed full start up of the
transport layer), so that one should be completely unaffected by this.
Closes#41745
Today the processors setting is permitted to be set to more than the
number of processors available to the JVM. The processors setting
directly sizes the number of threads in the various thread pools, with
most of these sizes being a linear function in the number of
processors. It doesn't make any sense to set processors very high as the
overhead from context switching amongst all the threads will overwhelm,
and changing the setting does not control how many physical CPU
resources there are on which to schedule the additional threads. We have
to draw a line somewhere and this commit deprecates setting processors
to more than the number of available processors. This is the right place
to draw the line given the linear growth as a function of processors in
most of the thread pools, and that some are capped at the number of
available processors already.
Adds an API to clone an index. This is similar to the index split and shrink APIs, just with the
difference that the number of primary shards is kept the same. In case where the filesystem
provides hard-linking capabilities, this is a very cheap operation.
Indexing cloning can be done by running `POST my_source_index/_clone/my_target_index` and it
supports the same options as the split and shrink APIs.
Closes#44128
* Switch from using docvalue_fields to extracting values from _source
where applicable. Doing this means parsing the _source and handling the
numbers parsing just like Elasticsearch is doing it when it's indexing
a document.
* This also introduces a minor limitation: aliases type of fields that
are NOT part of a tree of sub-fields will not be able to be retrieved
anymore. field_caps API doesn't shed any light into a field being an
alias or not and at _source parsing time there is no way to know if a
root field is an alias or not. Fields of the type "a.b.c.alias" can be
extracted from docvalue_fields, only if the field they point to can be
extracted from docvalue_fields. Also, not all fields in a hierarchy of
fields can be evaluated to being an alias.
(cherry picked from commit 8bf8a055e38f00df5f49c8d97f632f69d6e00c2c)
Removes unnecessary now timeline decompositions from shape builders
and deprecates ShapeBuilders in QueryBuilder in favor of libs/geo
shapes.
Relates to #40908
* The tests were creating the corruption and asserting its existence not on the repository base path but on a clean path.
As a result the consistency assertion on the repository wouldn't see the corruption ever an pass even if the cleanup was broken for repositories that have a non-root base path
* Fix this test randomly failing when running into async translog persistence edge case and failing to successfully close index
* Also, slightly improve debug logging on close failure
* Closes#44681
Switches to more robust way of generating random test geometries by
reusing lucene's GeoTestUtil. Removes duplicate random geometry
generators by moving them to the test framework.
Closes#37278
Add more logging to indexRandom
Seems that asynchronous indexing from indexRandom sometimes indexes
the same document twice, which will mess up the expected score calculations.
For example, indexing:
{ "index" : {"_id" : "1" } }
{"important" :"phrase match", "less_important": "nothing important"}
{ "index" : {"_id" : "2" } }
{"important" :"nothing important", "less_important" :"phrase match"}
Produces the expected scores: 13.8 for doc1, and 1.38 for doc2
indexing:
{ "index" : {"_id" : "1" } }
{"important" :"phrase match", "less_important": "nothing important"}
{ "index" : {"_id" : "2" } }
{"important" :"nothing important", "less_important" :"phrase match"}
{ "index" : {"_id" : "3" } }
{"important" :"phrase match", "less_important": "nothing important"}
Produces scores: 9.4 for doc1, and 1.96 for doc2 which are found in the
error logs.
Relates to #43144
This commit converts all remaining TransportRequest and
TransportResponse classes to implement Writeable, and disallows
Streamable implementations.
relates #34389
* Expose index age in ILM explain output
This adds the index's age to the ILM explain output, for example:
```
{
"indices" : {
"ilm-000001" : {
"index" : "ilm-000001",
"managed" : true,
"policy" : "full-lifecycle",
"lifecycle_date" : "2019-07-16T19:48:22.294Z",
"lifecycle_date_millis" : 1563306502294,
"age" : "1.34m",
"phase" : "hot",
"phase_time" : "2019-07-16T19:48:22.487Z",
... etc ...
}
}
}
```
This age can be used to tell when ILM will transition the index to the
next phase, based on that phase's `min_age`.
Resolves#38988
* Expose age in getters and in HLRC
A tool to work with snapshots.
Co-authored by @original-brownbear.
This commit adds snapshot tool and the single command cleanup, that
cleans up orphaned files for S3.
Snapshot tool lives in x-pack/snapshot-tool.
(cherry picked from commit fc4aed44dd975d83229561090f957a95cc76b287)
Today we reroute the cluster as part of the process of starting a shard, which
runs at `URGENT` priority. In large clusters, rerouting may take some time to
complete, and this means that a mere trickle of shard-started events can cause
starvation for other, lower-priority, tasks that are pending on the master.
However, it isn't really necessary to perform a reroute when starting a shard,
as long as one occurs eventually. This commit removes the inline reroute from
the process of starting a shard and replaces it with a deferred one that runs
at `NORMAL` priority, avoiding starvation of higher-priority tasks.
Backport of #44433 and #44543.
Today we have an annotation for controlling logging levels in
tests. This annotation serves two purposes, one is to control the
logging level used in tests, when such control is needed to impact and
assert the behavior of loggers in tests. The other use is when a test is
failing and additional logging is needed. This commit separates these
two concerns into separate annotations.
The primary motivation for this is that we have a history of leaving
behind the annotation for the purpose of investigating test failures
long after the test failure is resolved. The accumulation of these stale
logging annotations has led to excessive disk consumption. Having
recently cleaned this up, we would like to avoid falling into this state
again. To do this, we are adding a link to the test failure under
investigation to the annotation when used for the purpose of
investigating test failures. We will add tooling to inspect these
annotations, in the same way that we have tooling on awaits fix
annotations. This will enable us to report on the use of these
annotations, and report when stale uses of the annotation exist.
Large histories can be problematic and have the linearizability checker occasionally run OOM. As it's
very difficult to bound the size of the histories just right, this PR will let it instead run for 10 seconds
on large histories and then abort.
Closes#44429
* We only use this method in one place in production code and can replace that with a read -> remove it to simplify the interface
* Keep it as an implementation detail in the Azure repository
Registering a channel with a selector is a required operation for the
channel to be handled properly. Currently, we mix the registeration with
other setup operations (ip filtering, SSL initiation, etc). However, a
fail to register is fatal. This PR modifies how registeration occurs to
immediately close the channel if it fails.
There are still two clear loopholes for how a user can interact with a
channel even if registration fails. 1. through the exception handler.
2. through the channel accepted callback. These can perhaps be improved
in the future. For now, this PR prevents writes from proceeding if the
channel is not registered.
* Add Snapshot Lifecycle Management (#43934)
* Add SnapshotLifecycleService and related CRUD APIs
This commit adds `SnapshotLifecycleService` as a new service under the ilm
plugin. This service handles snapshot lifecycle policies by scheduling based on
the policies defined schedule.
This also includes the get, put, and delete APIs for these policies
Relates to #38461
* Make scheduledJobIds return an immutable set
* Use Object.equals for SnapshotLifecyclePolicy
* Remove unneeded TODO
* Implement ToXContentFragment on SnapshotLifecyclePolicyItem
* Copy contents of the scheduledJobIds
* Handle snapshot lifecycle policy updates and deletions (#40062)
(Note this is a PR against the `snapshot-lifecycle-management` feature branch)
This adds logic to `SnapshotLifecycleService` to handle updates and deletes for
snapshot policies. Policies with incremented versions have the old policy
cancelled and the new one scheduled. Deleted policies have their schedules
cancelled when they are no longer present in the cluster state metadata.
Relates to #38461
* Take a snapshot for the policy when the SLM policy is triggered (#40383)
(This is a PR for the `snapshot-lifecycle-management` branch)
This commit fills in `SnapshotLifecycleTask` to actually perform the
snapshotting when the policy is triggered. Currently there is no handling of the
results (other than logging) as that will be added in subsequent work.
This also adds unit tests and an integration test that schedules a policy and
ensures that a snapshot is correctly taken.
Relates to #38461
* Record most recent snapshot policy success/failure (#40619)
Keeping a record of the results of the successes and failures will aid
troubleshooting of policies and make users more confident that their
snapshots are being taken as expected.
This is the first step toward writing history in a more permanent
fashion.
* Validate snapshot lifecycle policies (#40654)
(This is a PR against the `snapshot-lifecycle-management` branch)
With the commit, we now validate the content of snapshot lifecycle policies when
the policy is being created or updated. This checks for the validity of the id,
name, schedule, and repository. Additionally, cluster state is checked to ensure
that the repository exists prior to the lifecycle being added to the cluster
state.
Part of #38461
* Hook SLM into ILM's start and stop APIs (#40871)
(This pull request is for the `snapshot-lifecycle-management` branch)
This change allows the existing `/_ilm/stop` and `/_ilm/start` APIs to also
manage snapshot lifecycle scheduling. When ILM is stopped all scheduled jobs are
cancelled.
Relates to #38461
* Add tests for SnapshotLifecyclePolicyItem (#40912)
Adds serialization tests for SnapshotLifecyclePolicyItem.
* Fix improper import in build.gradle after master merge
* Add human readable version of modified date for snapshot lifecycle policy (#41035)
* Add human readable version of modified date for snapshot lifecycle policy
This small change changes it from:
```
...
"modified_date": 1554843903242,
...
```
To
```
...
"modified_date" : "2019-04-09T21:05:03.242Z",
"modified_date_millis" : 1554843903242,
...
```
Including the `"modified_date"` field when the `?human` field is used.
Relates to #38461
* Fix test
* Add API to execute SLM policy on demand (#41038)
This commit adds the ability to perform a snapshot on demand for a policy. This
can be useful to take a snapshot immediately prior to performing some sort of
maintenance.
```json
PUT /_ilm/snapshot/<policy>/_execute
```
And it returns the response with the generated snapshot name:
```json
{
"snapshot_name" : "production-snap-2019.04.09-rfyv3j9qreixkdbnfuw0ug"
}
```
Note that this does not allow waiting for the snapshot, and the snapshot could
still fail. It *does* record this information into the cluster state similar to
a regularly trigged SLM job.
Relates to #38461
* Add next_execution to SLM policy metadata (#41221)
* Add next_execution to SLM policy metadata
This adds the next time a snapshot lifecycle policy will be executed when
retriving a policy's metadata, for example:
```json
GET /_ilm/snapshot?human
{
"production" : {
"version" : 1,
"modified_date" : "2019-04-15T21:16:21.865Z",
"modified_date_millis" : 1555362981865,
"policy" : {
"name" : "<production-snap-{now/d}>",
"schedule" : "*/30 * * * * ?",
"repository" : "repo",
"config" : {
"indices" : [
"foo-*",
"important"
],
"ignore_unavailable" : true,
"include_global_state" : false
}
},
"next_execution" : "2019-04-15T21:16:30.000Z",
"next_execution_millis" : 1555362990000
},
"other" : {
"version" : 1,
"modified_date" : "2019-04-15T21:12:19.959Z",
"modified_date_millis" : 1555362739959,
"policy" : {
"name" : "<other-snap-{now/d}>",
"schedule" : "0 30 2 * * ?",
"repository" : "repo",
"config" : {
"indices" : [
"other"
],
"ignore_unavailable" : false,
"include_global_state" : true
}
},
"next_execution" : "2019-04-16T02:30:00.000Z",
"next_execution_millis" : 1555381800000
}
}
```
Relates to #38461
* Fix and enhance tests
* Figured out how to Cron
* Change SLM endpoint from /_ilm/* to /_slm/* (#41320)
This commit changes the endpoint for snapshot lifecycle management from:
```
GET /_ilm/snapshot/<policy>
```
to:
```
GET /_slm/policy/<policy>
```
It mimics the ILM path only using `slm` instead of `ilm`.
Relates to #38461
* Add initial documentation for SLM (#41510)
* Add initial documentation for SLM
This adds the initial documentation for snapshot lifecycle management.
It also includes the REST spec API json files since they're sort of
documentation.
Relates to #38461
* Add `manage_slm` and `read_slm` roles (#41607)
* Add `manage_slm` and `read_slm` roles
This adds two more built in roles -
`manage_slm` which has permission to perform any of the SLM actions, as well as
stopping, starting, and retrieving the operation status of ILM.
`read_slm` which has permission to retrieve snapshot lifecycle policies as well
as retrieving the operation status of ILM.
Relates to #38461
* Add execute to the test
* Fix ilm -> slm typo in test
* Record SLM history into an index (#41707)
It is useful to have a record of the actions that Snapshot Lifecycle
Management takes, especially for the purposes of alerting when a
snapshot fails or has not been taken successfully for a certain amount of
time.
This adds the infrastructure to record SLM actions into an index that
can be queried at leisure, along with a lifecycle policy so that this
history does not grow without bound.
Additionally,
SLM automatically setting up an index + lifecycle policy leads to
`index_lifecycle` custom metadata in the cluster state, which some of
the ML tests don't know how to deal with due to setting up custom
`NamedXContentRegistry`s. Watcher would cause the same problem, but it
is already disabled (for the same reason).
* High Level Rest Client support for SLM (#41767)
* High Level Rest Client support for SLM
This commit add HLRC support for SLM.
Relates to #38461
* Fill out documentation tests with tags
* Add more callouts and asciidoc for HLRC
* Update javadoc links to real locations
* Add security test testing SLM cluster privileges (#42678)
* Add security test testing SLM cluster privileges
This adds a test to `PermissionsIT` that uses the `manage_slm` and `read_slm`
cluster privileges.
Relates to #38461
* Don't redefine vars
* Add Getting Started Guide for SLM (#42878)
This commit adds a basic Getting Started Guide for SLM.
* Include SLM policy name in Snapshot metadata (#43132)
Keep track of which SLM policy in the metadata field of the Snapshots
taken by SLM. This allows users to more easily understand where the
snapshot came from, and will enable future SLM features such as
retention policies.
* Fix compilation after master merge
* [TEST] Move exception wrapping for devious exception throwing
Fixes an issue where an exception was created from one line and thrown in another.
* Fix SLM for the change to AcknowledgedResponse
* Add Snapshot Lifecycle Management Package Docs (#43535)
* Fix compilation for transport actions now that task is required
* Add a note mentioning the privileges needed for SLM (#43708)
* Add a note mentioning the privileges needed for SLM
This adds a note to the top of the "getting started with SLM"
documentation mentioning that there are two built-in privileges to
assist with creating roles for SLM users and administrators.
Relates to #38461
* Mention that you can create snapshots for indices you can't read
* Fix REST tests for new number of cluster privileges
* Mute testThatNonExistingTemplatesAreAddedImmediately (#43951)
* Fix SnapshotHistoryStoreTests after merge
* Remove overridden newResponse functions that have been removed
* Fix compilation for backport
* Fix get snapshot output parsing in test
* [DOCS] Add redirects for removed autogen anchors (#44380)
* Switch <tt>...</tt> in javadocs for {@code ...}
* Prevent Confusing Blocked Thread Warnings in MockNioTransport
* We can run into a race where the stacktrace collection and subsequent logging happens after the thread has already unblocked thus logging a confusing stacktrace of wherever the transport thread was after it became unblocked
* Fixed this by comparing whether or not the recorded timestamp is still the same before and after the stacktrace was recorded and not logging if it already changed
Today the `BatchedRerouteService` submits its delayed reroute task at `HIGH`
priority, but in some cases a lower priority would be more appropriate. This
commit adds the facility to submit delayed reroute tasks at different
priorities, such that each submitted reroute task runs at a priority no lower
than the one requested. It does not change the fact that all delayed reroute
tasks are submitted at `HIGH` priority, but at least it makes this explicit.
Currently we loose information about whether a token list in an AnalyzeAction
response is null or an empty list, because we write a 0 value to the stream in
both cases and deserialize to a null value on the receiving side. This change
fixes this so we write an additional flag indicating whether the value is null
or not, followed by the size of the list and its content.
Closes#44078
This is a refactor to current JSON logging to make it more open for extensions
and support for custom ES log messages used inDeprecationLogger IndexingSlowLog , SearchSLowLog
We want to include x-opaque-id in deprecation logs. The easiest way to have this as an additional JSON field instead of part of the message is to create a custom DeprecatedMessage (extends ESLogMEssage)
These messages are regular log4j messages with a text, but also carry a map of fields which can then populate the log pattern. The logic for this lives in ESJsonLayout and ESMessageFieldConverter.
Similar approach can be used to refactor IndexingSlowLog and SearchSlowLog JSON logs to contain fields previously only present as escaped JSON string in a message field.
closes#41350
backport #41354
* The assertion added in #44214 is tripped by tests running dedicated
test clusters per test needlessly.This breaks existing tests like the one in #44245.
* Closes#44245
Today if a master-eligible node is converted to a master-ineligible node it may
remain in the voting configuration, meaning that the master node may count its
publish responses as an indication that it has properly persisted the cluster
state. However master-ineligible nodes do not properly persist the cluster
state, so it is not safe to count these votes.
This change adjusts `CoordinationState` to take account of this from a safety
point of view, and also adjusts the `Coordinator` to prevent such nodes from
joining the cluster. Instead, it triggers a reconfiguration to remove from the
voting configuration a node that now appears to be master-ineligible before
processing its join.
Backport of #43688, see #44260.
* Fix port range allocation with large worker IDs
Relates to #43983
The IDs gradle uses are incremented for the lifetime of the daemon which
can result in port ranges that are outside the valid range.
This change implements a modulo based formula to wrap the port ranges
when the IDs get too large.
Adresses #44134 but #44157 is also required to be able to close it.
* Cleans up all root level temp., snap-%s.dat, meta-%s.dat blobs that aren't referenced by any snapshot to deal with dangling blobs left behind by delete and snapshot finalization failures
* The scenario that get's us here is a snapshot failing before it was finalized or a delete failing right after it wrote the updated index-(N+1) that doesn't reference a snapshot anymore but then fails to remove that snapshot
* Not deleting other dangling blobs since that don't follow the snap-, meta- or tempfile naming schemes to not accidentally delete blobs not created by the snapshot logic
* Follow up to #42189
* Same safety logic, get list of all blobs before writing index-N blobs, delete things after index-N blobs was written
* Fix ShrinkIndexIT
* Move this test suit to cluster scope. Currently, `testShrinkThenSplitWithFailedNode` stops a random node which randomly turns out to be the only shared master node so the cluster reset fails on account of the fact that no shared master node survived.
* Closes#44164
Simplifies AbstractSimpleTransportTestCase to use JVM-local ports and also adds an assertion so
that cases like #44134 can be more easily debugged. The likely reason for that one is that a test,
which was repeated again and again while always spawning a fresh Gradle worker (due to Gradle
daemon) kept increasing Gradle worker IDs, causing an overflow at some point.
* Improve Repository Consistency Check in Tests (#44099)
* Check that index metadata as well as snapshot metadata always exists
when referenced by other metadata
* Fix SnapshotResiliencyTests on ExtraFS (#44113)
* As a result of #44099 we're now checking more directories and have to
ignore the `extraN` folders for those like we do for indices already
* Closes#44112
* The incompatible snapshots logic was created to track 1.x snapshots that
became incompatible with 2.x
* It serves no purpose at this point
* It adds an additional GET request to every loading of
RepositoryData (from loading the incompatible snapshots blob)
* Add WARN Logging if Mock Network Accepts Huge Number of Connections
* As discussed, added warn logging to rule out endless accept loops for #43387
* Had to handle it by the relatively awkward override in the mock nio
because we don't have logging in the NIO module where
(`ServerChannelContext` lives)
The base classes for transport requests and responses currently
implement Streamable and Writeable. The writeTo method on these base
classes is implemented with an empty implementation. Not only does this
complicate subclasses to think they need to call super.writeTo, but it
also can lead to not implementing writeTo when it should have been
implemented, or extendiong one of these classes when not necessary,
since there is nothing to actually implement.
This commit removes the empty writeTo from these base classes, and fixes
subclasses to not call super and in some cases implement an empty
writeTo themselves.
relates #34389
AggregatorFactory was generic over itself, but it doesn't appear we
use this functionality anywhere (e.g. to allow the super class
to declare arguments/return types generically for subclasses to
override). Most places use a wildcard constraint, and even when a
concrete type is specified it wasn't used.
But since AggFactories are widely used, this led to
the generic touching many pieces of code and making type signatures
fairly complex
Today the `ClusterInfoService` requires the `DiskThresholdMonitor` at
construction time so that it can notify it when nodes report changes in their
disk usage, but this is awkward to construct: the `DiskThresholdMonitor`
requires a `RerouteService` which requires an `AllocationService` which comees
from the `ClusterModule` which requires the `ClusterInfoService`.
Today we break the cycle with a `LazilyInitializedRerouteService` which is
itself a little ugly. This commit replaces this with a more traditional
subject/observer relationship between the `ClusterInfoService` and the
`DiskThresholdMonitor`.
Since #42636 we no longer treat connections specially when simulating a
blackholed connection. This means that at the end of the safety phase we may
have just started a connection attempt which will time out, but the default
timeout is 30 seconds, much longer than the 2 seconds we normally allow for
post-safety-phase discovery. This commit adds time for such a connection
attempt to time out.
It also fixes some spurious logging of `this` that now refers to an object with
an unhelpful `toString()` implementation introduced in #42636.
Fixes#44073
In today's test suite indices mostly use the default value of `12h` for the
`index.soft_deletes.retention_lease.period` setting, which in the context of
the test suite essentially means "never expires". In fact, the tests should all
behave correctly even if the lease period is much shorter; tests that rely on
leases not expiring should configure their indices appropriately.
This commit randomises the lease expiry time for those indices created during
tests which do not set a specific value for this setting.
* Remove some obvious dead code
* Move assert methods that were only used in a single test class to the child they belong to
* Inline some redundant methods
* Use ability to list child "folders" in the blob store to implement recursive delete on all stale index folders when cleaning up instead of using the diff between two `RepositoryData` instances to cover aborted deletes
* Runs after ever delete operation
* Relates #13159 (fixing most of this issues caused by unreferenced indices, leaving some meta files to be cleaned up only)
This PR enables the indexing optimization using sequence numbers on
replicas. With this optimization, indexing on replicas should be faster
and use less memory as it can forgo the version lookup when possible.
This change also deactivates the append-only optimization on replicas.
Relates #34099
This commit converts the ConnectionManager's openConnection and connectToNode methods to
async-style. This will allow us to not block threads anymore when opening connections. This PR also
adapts the cluster coordination subsystem to make use of the new async APIs, allowing to remove
some hacks in the test infrastructure that had to account for the previous synchronous nature of the
connection APIs.
* Use unique ports per test worker
* Add test for system property
* check presence of tests.gradle
* Revert "check presence of tests.gradle"
This reverts commit 2fee7512a28f95c94c5bf7a3312e808f918a9510.
This commit changes the way we manage refreshes in the index engines.
Instead of relying on a SearcherManager, this change uses a ReaderManager that
creates ElasticsearchDirectoryReader when needed. Searchers are now created on-demand
(when acquireSearcher is called) from the current ElasticsearchDirectoryReader.
It also slightly changes the Engine.Searcher to extend IndexSearcher in order
to simplify the usage in the consumer.
This brings TokenizerFactory into line with CharFilterFactory and TokenFilterFactory,
and removes the need to pass around tokenizer names when building custom analyzers.
As this means that TokenizerFactory is no longer a functional interface, the commit also
adds a factory method to TokenizerFactory to make construction simpler.
This is a prerequisite of #42189:
* Add directory delete method to blob container specific to each implementation:
* Some notes on the implementations:
* AWS + GCS: We can simply exploit the fact that both AWS and GCS return blobs lexicographically ordered which allows us to simply delete in the same order that we receive the blobs from the listing request. For AWS this simply required listing without the delimiter setting (so we get a deep listing) and for GCS the same behavior is achieved by not using the directory mode on the listing invocation. The nice thing about this is, that even for very large numbers of blobs the memory requirements are now capped nicely since we go page by page when deleting.
* For Azure I extended the parallelization to the listing calls as well and made it work recursively. I verified that this works with thread count `1` since we only block once in the initial thread and then fan out to a "graph" of child listeners that never block.
* HDFS and FS are trivial since we have directory delete methods available for them
* Enhances third party tests to ensure the new functionality works (I manually ran them for all cloud providers)
* Add Ability to List Child Containers to BlobContainer (#42653)
* Add Ability to List Child Containers to BlobContainer
* This is a prerequisite of #42189
This adds a `rare_terms` aggregation. It is an aggregation designed
to identify the long-tail of keywords, e.g. terms that are "rare" or
have low doc counts.
This aggregation is designed to be more memory efficient than the
alternative, which is setting a terms aggregation to size: LONG_MAX
(or worse, ordering a terms agg by count ascending, which has
unbounded error).
This aggregation works by maintaining a map of terms that have
been seen. A counter associated with each value is incremented
when we see the term again. If the counter surpasses a predefined
threshold, the term is removed from the map and inserted into a cuckoo
filter. If a future term is found in the cuckoo filter we assume it
was previously removed from the map and is "common".
The map keys are the "rare" terms after collection is done.
Action is a class that encapsulates meta information about an action
that allows it to be called remotely, specifically the action name and
response type. With recent refactoring, the action class can now be
constructed as a static constant, instead of needing to create a
subclass. This makes the old pattern of creating a singleton INSTANCE
both misnamed and lacking a common placement.
This commit renames Action to ActionType, thus allowing the old INSTANCE
naming pattern to be TYPE on the transport action itself. ActionType
also conveys that this class is also not the action itself, although
this change does not rename any concrete classes as those will be
removed organically as they are converted to TYPE constants.
relates #34389
Today the `DiskThresholdMonitor` limits the frequency with which it submits
reroute tasks, but it might still submit these tasks faster than the master can
process them if, for instance, each reroute takes over 60 seconds. This causes
a problem since the reroute task runs with priority `IMMEDIATE` and is always
scheduled when there is a node over the high watermark, so this can starve any
other pending tasks on the master.
This change avoids further updates from the monitor while its last task(s) are
still in progress, and it measures the time of each update from the completion
time of the reroute task rather than its start time, to allow a larger window
for other tasks to run.
It also now makes use of the `RoutingService` to submit the reroute task, in
order to batch this task with any other pending reroutes. It enhances the
`RoutingService` to notify its listeners on completion.
Fixes#40174
Relates #42559
Introduces a new `ConsistentSecureSettingsValidatorService` service that exposes
a single public method, namely `allSecureSettingsConsistent`. The method returns
`true` if the local node's secure settings (inside the keystore) are equal to the
master's, and `false` otherwise. Technically, the local node has to have exactly
the same secure settings - setting names should not be missing or in surplus -
for all `SecureSetting` instances that are flagged with the newly introduced
`Property.Consistent`. It is worth highlighting that the `allSecureSettingsConsistent`
is not a consensus view across the cluster, but rather the local node's perspective
in relation to the master.
This change removes the ability to wrap an IndexSearcher in plugins. The IndexSearcherWrapper is replaced by an IndexReaderWrapper and allows to wrap the DirectoryReader only. This simplifies the creation of the context IndexSearcher that is used on a per request basis. This change also moves the optimization that was implemented in the security index searcher wrapper to the ContextIndexSearcher that now checks the live docs to determine how the search should be executed. If the underlying live docs is a sparse bit set the searcher will compute the intersection
betweeen the query and the live docs instead of checking the live docs on every document that match the query.
Currently changing resources (like dictionaries, synonym files etc...) of search
time analyzers is only possible by closing an index, changing the underlying
resource (e.g. synonym files) and then re-opening the index for the change to
take effect.
This PR adds a new API endpoint that allows triggering reloading of certain
analysis resources (currently token filters) that will then pick up changes in
underlying file resources. To achieve this we introduce a new type of custom
analyzer (ReloadableCustomAnalyzer) that uses a ReuseStrategy that allows
swapping out analysis components. Custom analyzers that contain filters that are
markes as "updateable" will automatically choose this implementation. This PR
also adds this capability to `synonym` token filters for use in search time
analyzers.
Relates to #29051
GatewayIndexStateIT#testRecoverBrokenIndexMetadata replies on the
flushing on shutdown. This behaviour, however, can be randomly disabled
in MockInternalEngine.
Closes#43034
Adds support for the situation where only voting-only nodes are bootstrapped. In that case, they will
still try to become elected and bring full master nodes into the cluster.
Currently `AbstractQueryTestCase#testToQuery` checks the search context cachable
flag. This is a bit fragile due to the high randomization of query builders
performed by this general test. Also we might only rarely check the
"interesting" cases because they rarely get generated when fully randomizing the
query builder.
This change moved the general checks out ot #testToQuery and instead adds
dedicated cache tests for those query builders that exhibit something other than
the default behaviour.
Closes#43200
A voting-only master-eligible node is a node that can participate in master elections but will not act
as a master in the cluster. In particular, a voting-only node can help elect another master-eligible
node as master, and can serve as a tiebreaker in elections. High availability (HA) clusters require at
least three master-eligible nodes, so that if one of the three nodes is down, then the remaining two
can still elect a master amongst them-selves. This only requires one of the two remaining nodes to
have the capability to act as master, but both need to have voting powers. This means that one of
the three master-eligible nodes can be made as voting-only. If this voting-only node is a dedicated
master, a less powerful machine or a smaller heap-size can be chosen for this node. Alternatively, a
voting-only non-dedicated master node can play the role of the third master-eligible node, which
allows running an HA cluster with only two dedicated master nodes.
Closes#14340
Co-authored-by: David Turner <david.turner@elastic.co>
This refactors AggregatorTestCase to allow testing mock scripts.
The main change is to QueryShardContext. This was previously mocked,
but to get the ScriptService you have to invoke a final method
which can't be mocked.
Instead, we just create a mostly-empty QueryShardContext and populate
the fields that are needed for testing. It also introduces a few
new helper methods that can be overridden to change the default
behavior a bit.
Most tests should be able to override getMockScriptService() to supply
a ScriptService to the context, which is later used by the aggs.
More complicated tests can override queryShardContextMock() as before.
Adds a test to MaxAggregatorTests to test out the new functionality.
At the end of a peer recovery the primary wants to mark the replica as in-sync. For that the
persisted local checkpoint of the replica needs to have caught up with the global checkpoint on the
primary. If translog durability is set to ASYNC, this means that information about the persisted local
checkpoint can lag on the primary and might need to be explicitly fetched through a global
checkpoint sync action. Unfortunately, that action will only be triggered after 30 seconds, and, even
worse, will only run based on what the in-sync shard copies say (see
IndexShard.maybeSyncGlobalCheckpoint). As the replica has not been marked as in-sync yet, it is
not taken into consideration, and the primary might have its global checkpoint equal to the max seq
no, so it thinks nothing needs to be done.
Closes#43486
AggregatorTestCase will NPE if only a single, null MappedFieldType
is provided (which is required to simulate an unmapped field). While
it's possible to test unmapped fields by supplying other, non-related
field types... that's clunky and unnecessary. AggregatorTestCase
just needs to filter out null field types when setting up.
* For the issue in #43086 we were running into inactive shards because the random timestamps previously used would randomly make `org.elasticsearch.index.shard.IndexShard#checkIdle` see an incorrect+huge inactive time
* Also fixed one other spot in tests that passed `ms` instead of `ns` for the same timestamp on an index op to correctly use relative `ns`
* Closes#43086
Today the `DisruptibleMockTransport` always allows a connection to a node to be
established, and then fails requests sent to that node such as the subsequent
handshake. Since #42342, we log handshake failures on an open connection as a
warning, and this makes the test logs rather noisy. This change fails the
connection attempt first, avoiding these unrealistic warnings.
* The precision of the timestamps we get from the cached time thread is only 200ms by default resulting in a number of needless ~200ms slow network thread execution logs
* Fixed by making the warn threshold a function of the precision of the cached time thread found in the settings
Local and global checkpoints currently do not correctly reflect what's persisted to disk. The issue is
that the local checkpoint is adapted as soon as an operation is processed (but not fsynced yet). This
leaves room for the history below the global checkpoint to still change in case of a crash. As we rely
on global checkpoints for CCR as well as operation-based recoveries, this has the risk of shard
copies / follower clusters going out of sync.
This commit required changing some core classes in the system:
- The LocalCheckpointTracker keeps track now not only of the information whether an operation has
been processed, but also whether that operation has been persisted to disk.
- TranslogWriter now keeps track of the sequence numbers that have not been fsynced yet. Once
they are fsynced, TranslogWriter notifies LocalCheckpointTracker of this.
- ReplicationTracker now keeps track of the persisted local and persisted global checkpoints of all
shard copies when in primary mode. The computed global checkpoint (which represents the
minimum of all persisted local checkpoints of all in-sync shard copies), which was previously stored
in the checkpoint entry for the local shard copy, has been moved to an extra field.
- The periodic global checkpoint sync now also takes async durability into account, where the local
checkpoints on shards only advance when the translog is asynchronously fsynced. This means that
the previous condition to detect inactivity (max sequence number is equal to global checkpoint) is
not sufficient anymore.
- The new index closing API does not work when combined with async durability. The shard
verification step is now requires an additional pre-flight step to fsync the translog, so that the main
verify shard step has the most up-to-date global checkpoint at disposition.
With this change, we will rebuild the live version map and local
checkpoint using documents (including soft-deleted) from the safe commit
when opening an internal engine. This allows us to safely prune away _id
of all soft-deleted documents as the version map is always in-sync with
the Lucene index.
Relates #40741
Supersedes #42979
* introduce state to the REST API specification
* change state over to stability
* CCR is no GA updated to stable
* SQL is now GA so marked as stable
* Introduce `internal` as state for API's, marks stable in terms of lifetime but unstable in terms of guarantees on its output format since it exposes internal representations
* make setting a wrong stability value, or not setting it at all an error that causes the YAML test suite to fail
* update spec files to be explicit about their stability state
* Document the fact that stability needs to be defined
Otherwise the YAML test runner will fail (with a nice exception message)
* address check style violations
* update rest spec unit tests to include stability
* found one more test spec file not declaring stability, made sure stability appears after documentation everywhere
* cluster.state is stable, mark response in some way to denote its a key value format that can be changed during minors
* mark data frame API's as beta
* remove internal and private as states for an API
* removed the wrong enum values in the Stability Enum in the previous commit
(cherry picked from commit 61c34bbd92f8f7e5f22fa411c6b682b0ebd8a99d)
This commit modifies InternalTestCluster to allow using client() and
other operations inside a RestartCallback (onStoppedNode typically).
Restarting nodes are now removed from the map and thus all
methods now return the state as if the restarting node does not exist.
This avoids various exceptions stemming from accessing the stopped
node(s).
Currently the randomization of the q.b. in these tests can create query strings
that can cause caching to be disabled for this query if we query all fields and
there is a date field present. This is pretty much an anomaly that we shouldn't
generally test for in the "testToQuery" tests where cache policies are checked.
This change makes sure we don't create offending query strings so the cache
checks never hit these cases and adds a special test method to check this edge
case.
Closes#43112
Unresponsive network simulation would throw away requests. However, then
we no longer have any guarantees that a transport action either succeeds
or fails, which could lead to hangs (example: unclosed IndexShard
permits).
Closes#42244
WriteActionsTests#testBulk and WriteActionsTests#testIndex sometimes
fail with a pending retention lock. We might leak retention locks when
switching to async recovery. However, it's more likely that ongoing
recoveries prevent the retention lock from releasing.
This change increases the waiting time when we check for no pending
retention lock and also ensures no ongoing recovery in
WriteActionsTests.
Closes#41054
This commit refactors put mapping request validation for reuse. The
concrete case that we are after here is the ability to apply effectively
the same framework to indices aliases requests. This commit refactors
the put mapping request validation framework to allow for that.
Adds a metadata field to snapshots which can be used to store arbitrary
key-value information. This may be useful for attaching a description of
why a snapshot was taken, tagging snapshots to make categorization
easier, or identifying the source of automatically-created snapshots.
Some clusters might have been already migrated to version 7 without being warned about the joda-java migration changes.
Deprecation api on that version will give them guidance on what patterns need to be changed.
relates. This change is using the same logic like in 6.8 that is: verifying the pattern is from the incompatible set ('y'-Y', 'C', 'Z' etc), not from predifined set, not prefixed with 8. AND was also created in 6.x. Mappings created in 7.x are considered migrated and should not generate warnings
There is no pipeline check (present on 6.8) as it is impossible to verify when the pipeline was created, and therefore to make sure the format is depracated or not
#42010
Whether security is enabled/disabled is dependent on the combination
of the node settings and the cluster license.
This commit adds a license state listener that logs when the license
change causes security to switch state (or to be initialised).
This is primarily useful for diagnosing cluster formation issues.
Backport of: #42488
We had this as a dependency for legacy dependencies that still needed
the Log4j 1.2 API. This appears to no longer be necessary, so this
commit removes this artifact as a dependency.
To remove this dependency, we had to fix a few places where we were
accidentally relying on Log4j 1.2 instead of Log4j 2 (easy to do, since
both APIs were on the compile-time classpath).
Finally, we can remove our custom Netty logger factory. This was needed
when we were on Log4j 1.2 and handled logging in our own unique
way. When we migrated to Log4j 2 we could have dropped this
dependency. However, even then Netty would still pick up Log4j 1.2 since
it was on the classpath, thus the advantage to removing this as a
dependency now.
Since the max_score optimization landed in Elasticsearch 7,
the CommonTermsQuery is redundant and slower. Moreover the
cutoff_frequency parameter for MatchQuery and MultiMatchQuery
is redundant.
Relates to #27096
(cherry picked from commit 04b74497314eeec076753a33b3b6cc11549646e8)
* Fix Incorrect Time Math in MockTransport
* The timeunit here must be nanos for the current time (we even convert it accordingly in the logging)
* Also, changed the log message when dumping stack traces a little to make it easier to grep for (otherwise it's the same as the message on unregister)
* Add Infrastructure to Run 3rd Party Repository Tests
* Add infrastructure to run third party repository tests using our standard JUnit infrastructure
* This is a prerequisite of #42189
* Remove Delete Method from BlobStore (#41619)
* The delete method on the blob store was used almost nowhere and just duplicates the delete method on the blob containers
* The fact that it provided for some recursive delete logic (that did not behave the same way on all implementations) was not used and not properly tested either
* Dump Stacktrace on Slow IO-Thread Operations
* Follow up to #39729 extending the functionality to actually dump the
stack when the thread is blocked not afterwards
* Logging the stacktrace after the thread became unblocked is only of
limited use because we don't know what happened in the slow callback
from that (only whether we were blocked on a read,write,connect etc.)
* Relates #41745
* Fix testTracerLog Network Tests
* Start appender before using it like we do for e.g. the Netty leak detection appender to avoid interference from actions on the network threads that might still be dangling from previous tests in the same suite
* Closes#41890
David Turner
Lee Hinman
Jason Tedor
Zachary Tong
Tim Brooks
Stuart Tettemer
Yannick Welsch
Nik Everett
Tanguy Leroux
Marios Trivyzas
Ryan Ernst
Armin Braun
Tim Vernum
Alan Woodward
Jim Ferenczi
Nhat Nguyen
Gordon Brown
Jay Modi
Adrien Grand
bellengao
Przemysław Witek
Rory Hunter
Julie Tibshirani
Martijn Laarman
Maria Ralli
James Rodewig
Ioannis Kakavas
Jake Landis
William Brafford
Henning Andersen
Przemyslaw Gomulka
Martijn van Groningen
Mayya Sharipova
markharwood
Igor Motov
Ignacio Vera
Alpar Torok
Hendrik Muhs
Luca Cavanna
Nick Knize
Zachary Tong
Andrey Ershov
Andrei Stefan
Christoph Büscher
Albert Zaharovits
David Roberts
Mark Vieira
henryptung
Tim Vernum