Instead of logging warnings we now rethrow exceptions thrown inside
scheduled/submitted tasks. This will still log them as warnings in
production but has the added benefit that if they are thrown during
unit/integration test runs, the test will be flagged as an error.
This is a continuation of #38014
Fixed NPE that caused CCR tests (IndexFollowingIT and likely others)
to fail.
schedule could bubble rejected exception to uncaught exception
handler when not using SAME executor if thread pool is terminated.
Now ignore rejected exception silently if executor is shutdown.
Backport PR #38389 for 6.7 produces warnings for rollover test.
This fixes FullClusterRestartIT warning expectations
for rollover request
Relates to #38389
Relax test warning message checking to pre-empt PR 38022 landing in 6.7 with new warning messages.
The relaxed test now just assumes any warning message starting with “[types removal]” is tolerated rather than the precise phrasing used in the 6.7 branch.
We now throw a WarningFailureException instead of ResponseException if
there's any warning in a response. This change leads to the failures of
testSnapshotRestore in the BWC builds for the last two days.
Relates #37247
This PR removes the temporary change we made to the yml test harness in #37285
to automatically set `include_type_name` to `true` in index creation requests
if it's not already specified. This is possible now that the vast majority of
index creation requests were updated to be typeless in #37611. A few additional
tests also needed updating here.
Additionally, this PR updates the test harness to set `include_type_name` to
`false` in index creation requests when communicating with 6.x nodes. This
mirrors the logic added in #37611 to allow for typeless document write requests
in test set-up code. With this update in place, we can remove many references
to `include_type_name: false` from the yml tests.
With #37000 we made sure that fnial reduction is automatically disabled
whenever a localClusterAlias is provided with a SearchRequest.
While working on #37838, we found a scenario where we do need to set a
localClusterAlias yet we would like to perform a final reduction in the
remote cluster: when searching on a single remote cluster.
Relates to #32125
This commit adds support for a separate finalReduce flag to
SearchRequest and makes use of it in TransportSearchAction in case we
are searching against a single remote cluster.
This also makes sure that num_reduce_phases is correct when searching
against a single remote cluster: it makes little sense to return
`num_reduce_phases` set to `2`, which looks especially weird in case
the search was performed against a single remote shard. We should
perform one reduction phase only in this case and `num_reduce_phases`
should reflect that.
* line length
This test failed once because the index wasn't fully ready
(ie, engine opened). This commit changes the test so that
it waits for the index to be green before checking the history
UUID.
Closes#34452
Scheduler.schedule(...) would previously assume that caller handles
exception by calling get() on the returned ScheduledFuture.
schedule() now returns a ScheduledCancellable that no longer gives
access to the exception. Instead, any exception thrown out of a
scheduled Runnable is logged as a warning.
This is a continuation of #28667, #36137 and also fixes#37708.
With #37566 we have introduced the ability to merge multiple search responses into one. That makes it possible to expose a new way of executing cross-cluster search requests, that makes CCS much faster whenever there is network latency between the CCS coordinating node and the remote clusters. The coordinating node can now send a single search request to each remote cluster, which gets reduced by each one of them. from + size results are requested to each cluster, and the reduce phase in each cluster is non final (meaning that buckets are not pruned and pipeline aggs are not executed). The CCS coordinating node performs an additional, final reduction, which produces one search response out of the multiple responses received from the different clusters.
This new execution path will be activated by default for any CCS request unless a scroll is provided or inner hits are requested as part of field collapsing. The search API accepts now a new parameter called ccs_minimize_roundtrips that allows to opt-out of the default behaviour.
Relates to #32125
Today we pass `discovery.zen.minimum_master_nodes` to nodes started up in
tests, but for 7.x nodes this setting is not required as it has no effect.
This commit removes this setting so that nodes are started with more realistic
configurations, and deprecates it.
Doc-value fields now return a value that is based on the mappings rather than
the script implementation by default.
This deprecates the special `use_field_mapping` docvalue format which was added
in #29639 only to ease the transition to 7.x and it is not necessary anymore in
7.0.
This commit restores a noop version of the AllFieldMapper that is instanciated only
for indices created in 6x. We need this metadata field mapper to be present in this version
in order to allow the upgrade of indices that explicitly disable _all (enabled: false).
The mapping of these indices contains a reference to the _all field that we cannot remove
in 7 so we'll need to keep this metadata mapper in 7x. Since indices created in 6x will not
be compatible with 8, we'll remove this noop mapper in the next major version.
Closes#37429
The certgen, certutil and saml-metadata tools did not correctly return
their exit code to the calling shell.
These commands now explicitly exit with the code that was returned
from the main(args, terminal) method.
Added deprecation warnings for use of include_type_name in put/get index templates.
HLRC changes:
GetIndexTemplateRequest has a new client-side class which is a copy of server's GetIndexTemplateResponse but modified to be typeless.
PutIndexTemplateRequest has a new client-side counterpart which doesn't use types in the mappings
Relates to #35190
This commit adds classifiers to the distributions indicating the
OS (for archives) and platform. The current OSes are for windows, darwin (ie
macos) and linux. This change will allow future OS/architecture specific
changes to the distributions. Note the docs using distribution links
have been updated, but will be reworked in a followup to make OS
specific instructions for the archives.
In order to support JSON log format, a custom pattern layout was used and its configuration is enclosed in ESJsonLayout. Users are free to use their own patterns, but if smooth Beats integration is needed, they should use ESJsonLayout. EvilLoggerTests are left intact to make sure user's custom log patterns work fine.
To populate additional fields node.id and cluster.uuid which are not available at start time,
a cluster state update will have to be received and the values passed to log4j pattern converter.
A ClusterStateObserver.Listener is used to receive only one ClusteStateUpdate. Once update is received the nodeId and clusterUUid are set in a static field in a NodeAndClusterIdConverter.
Following fields are expected in JSON log lines: type, tiemstamp, level, component, cluster.name, node.name, node.id, cluster.uuid, message, stacktrace
see ESJsonLayout.java for more details and field descriptions
Docker log4j2 configuration is now almost the same as the one use for ES binary.
The only difference is that docker is using console appenders, whereas ES is using file appenders.
relates: #32850
The packaging tests currently have a test which installs elasticsearch,
removes it, modifies ownership of /etc/elasticsearch, and
reinstalls. It then checks that the /etc/elasticsearch directory has
ownership that the package expects. But the recursive change touches
files not owned by the package. In the past this worked because we did a
recursive ownership change within the package postinst. However, that
was recently removed, and thus this test no longer makes sense.
The ingest date processor is currently only able to parse joda formats.
However it is not using the existing elasticsearch classes but access
joda directly. This means that our existing BWC layer does not notify
the user about deprecated formats. This commit switches to use the
exising Elasticsearch Joda methods to acquire a date format, that
includes the BWC check and the ability to parse java 8 dates.
The date parsing in ingest has also another extra feature, that the
fallback year, when a date format without a year is used, is the current
year, and not 1970 like usual. This is currently not properly supported
in the DateFormatter class. As this is the only case for this feature
and java time can take care of this using the toZonedDateTime() method,
a workaround just for the joda time parser has been created, that can be
removed soon again from 7.0.
elasticsearch-node tool helps to restore cluster if half or more of
master eligible nodes are lost. Of course, all bets are off, regarding
data consistency.
There are two parts of the tool: unsafe-bootstrap to be used when there
is still at least one master-eligible node alive and detach-cluster,
when there are no master-eligible nodes left.
This commit implements the first part.
Docs for the tool will be added separately as a part of #37812.
* Testing conventions now checks for tests in main
This is the last outstanding feature of the old NamingConventionsTask,
so time to remove it.
* PR review
This commit moves the aggregation and mapping code from joda time to
java time. This includes field mappers, root object mappers, aggregations with date
histograms, query builders and a lot of changes within tests.
The cut-over to java time is a requirement so that we can support nanoseconds
properly in a future field mapper.
Relates #27330
Users may require the sequence number and primary terms to perform optimistic concurrency control operations. Currently, you can get the sequence number via the `docvalues_fields` API but the primary term is not accessible because it is maintained by the `SeqNoFieldMapper` and the infrastructure can't find it.
This commit adds a dedicated sub fetch phase to return both numbers that is connected to a new `seq_no_primary_term` parameter.
The integ tests currently use the raw zip project name as the
distribution type. This commit simplifies this specification to be
"default" or "oss". Whether zip or tar is used should be an internal
implementation detail of the integ test setup, which can (in the future)
be platform specific.
This is a continuation of #28667 and has as goal to convert all executors to propagate errors to the
uncaught exception handler. Notable missing ones were the direct executor and the scheduler. This
commit also makes it the property of the executor, not the runnable, to ensure this property. A big
part of this commit also consists of vastly improving the test coverage in this area.
Some systems default to a nofile ulimit of 65535. To reduce the pain of
deploying Elasticsearch to such systems, this commit lowers the required
limit from 65536 to 65535.
This commit removes permission editing commands from the postinst
scriptlet. Instead, we now fully configure the owner/group (as well as
sticky bit) for these files and directories.
closes#37143
* Default include_type_name to false for get and put mappings.
* Default include_type_name to false for get field mappings.
* Add a constant for the default include_type_name value.
* Default include_type_name to false for get and put index templates.
* Default include_type_name to false for create index.
* Update create index calls in REST documentation to use include_type_name=true.
* Some minor clean-ups around the get index API.
* In REST tests, use include_type_name=true by default for index creation.
* Make sure to use 'expression == false'.
* Clarify the different IndexTemplateMetaData toXContent methods.
* Fix FullClusterRestartIT#testSnapshotRestore.
* Fix the ml_anomalies_default_mappings test.
* Fix GetFieldMappingsResponseTests and GetIndexTemplateResponseTests.
We make sure to specify include_type_name=true during xContent parsing,
so we continue to test the legacy typed responses. XContent generation
for the typeless responses is currently only covered by REST tests,
but we will be adding unit test coverage for these as we implement
each typeless API in the Java HLRC.
This commit also refactors GetMappingsResponse to follow the same appraoch
as the other mappings-related responses, where we read include_type_name
out of the xContent params, instead of creating a second toXContent method.
This gives better consistency in the response parsing code.
* Fix more REST tests.
* Improve some wording in the create index documentation.
* Add a note about types removal in the create index docs.
* Fix SmokeTestMonitoringWithSecurityIT#testHTTPExporterWithSSL.
* Make sure to mention include_type_name in the REST docs for affected APIs.
* Make sure to use 'expression == false' in FullClusterRestartIT.
* Mention include_type_name in the REST templates docs.
Added warnings checks to existing tests
Added “defaultTypeIfNull” to DocWriteRequest interface so that Bulk requests can override a null choice of document type with any global custom choice.
Related to #35190
When the deprecation log is written to within scripting support code
like ScriptDocValues, it runs under the reduces privileges of scripts.
Sometimes this can trigger log rolling, which then causes uncaught
security errors, as was handled in #28485. While doing individual
deprecation handling within each deprecation scripting location is
possible, there are a growing number of deprecations in scripts.
This commit wraps the logging call within the deprecation logger use a
doPrivileged block, just was we would within individual logging call
sites for scripting utilities.
In Lucene 8 searches can skip non-competitive hits if the total hit count is not requested.
It is also possible to track the number of hits up to a certain threshold. This is a trade off to speed up searches while still being able to know a lower bound of the total hit count. This change adds the ability to set this threshold directly in the track_total_hits search option. A boolean value (true, false) indicates whether the total hit count should be tracked in the response. When set as an integer this option allows to compute a lower bound of the total hits while preserving the ability to skip non-competitive hits when enough matches have been collected.
Relates #33028
* Deprecate types in index API
- deprecate type-based constructors of IndexRequest
- update tests to use typeless IndexRequest constructors
- no yaml tests as they have been already added in #35790
Relates to #35190
The following updates were made:
* Add deprecation warnings to `RestUpdateAction`, plus a test in `RestUpdateActionTests`.
* Deprecate relevant methods on the Java HLRC requests/ responses.
* Add HLRC integration tests for the typed APIs.
* Update documentation (for both the REST API and Java HLRC).
* Fix failing integration tests.
Because of an earlier PR, the REST yml tests were already updated (one version without types, and another legacy version that retains types).
There are certain BootstrapCheck checks that may need access environment-specific
values. Watcher's EncryptSensitiveDataBootstrapCheck passes in the node's environment
via a constructor to bypass the shortcoming in BootstrapContext. This commit
pulls in the node's environment into BootstrapContext.
Another case is found in #36519, where it is useful to check the state of the
data-path. Since PathUtils.get and Paths.get are forbidden APIs, we rely on
the environment to retrieve references to things like node data paths.
This means that the BootstrapContext will have the same Settings used in the
Environment, which currently differs from the Node's settings.
data files under the cluster name subdirectory has been deprecated and was
meant to be removed in 6.0. This commit removes some leftover referrences to
these paths.
Redeprecates the `/_xpack/rollup` endpoints in favor of `/_rollup`.
When we cleanup the rollup in a cluster containing 6.x nodes we need to
use `/_xpack/rollup` instead of `/_rollup` because the 6.x nodes don't
know about `/_rollup`. In those cases we must ignore the deprecation
warnings that the 7.0 node will return for the end point.
Closes#36044
The following updates were made:
- Add a new untyped endpoint `{index}/_explain/{id}`.
- Add deprecation warnings to Rest*Action, plus tests in Rest*ActionTests.
- For each REST yml test, make sure there is one version without types, and another legacy version that retains types (called *_with_types.yml).
- Deprecate relevant methods on the Java HLRC requests/ responses.
- Update documentation (for both the REST API and Java HLRC).
For each API, the following updates were made:
- Add deprecation warnings to `Rest*Action`, plus tests in `Rest*ActionTests`.
- For each REST yml test, make sure there is one version without types, and another legacy version that retains types (called *_with_types.yml).
- Deprecate relevant methods on the Java HLRC requests/ responses.
- Update documentation (for both the REST API and Java HLRC).
Moves all remaining (rolling-upgrade and mixed-version) REST tests to use Zen2. To avoid adding
extra configuration, it relies on Zen2 being set as the default discovery type. This required a few
smaller changes in other tests. I've removed AzureMinimumMasterNodesTests which tests Zen1
functionality and dates from a time where host providers were not configurable and each cloud
plugin had its own discovery.type, subclassing the ZenDiscovery class. I've also adapted a few tests
which were unnecessarily adding addTestZenDiscovery = false for the same legacy reasons. Finally,
this also moves the unconfigured-node-name REST test to Zen2, testing the auto-bootstrapping
functionality in development mode when no discovery configuration is provided.
In real deployments it is important that clusters are properly configured to
avoid accidentally forming multiple independent clusters at cluster
bootstrapping time. However we also expect to be able to unpack Elasticsearch
and start up one or more nodes without any up-front configuration, and have
them do their best to find each other and form a cluster after a few seconds.
This change adds a delayed automatic bootstrapping process to nodes that start
up with no relevant settings set to support the desired out-of-the-box
experience without compromising safety in properly-configured deployments.
This commit changes the format of the `hits.total` in the search response to be an object with
a `value` and a `relation`. The `value` indicates the number of hits that match the query and the
`relation` indicates whether the number is accurate (in which case the relation is equals to `eq`)
or a lower bound of the total (in which case it is equals to `gte`).
This change also adds a parameter called `rest_total_hits_as_int` that can be used in the
search APIs to opt out from this change (retrieve the total hits as a number in the rest response).
Note that currently all search responses are accurate (`track_total_hits: true`) or they don't contain
`hits.total` (`track_total_hits: true`). We'll add a way to get a lower bound of the total hits in a
follow up (to allow numbers to be passed to `track_total_hits`).
Relates #33028
Currently is `java` is not in $PATH the preinst script fails
prematurely and prevents an appropriate message from getting displayed
to the user.
Make package installation more user friendly when java is not in
$PATH and add a test for it.
Also use a she-bang in the preinst script, as, at least in Debian,
maintainer scripts must start with the #! convention [1].
Relates #31845
[1] https://www.debian.org/doc/debian-policy/ch-maintainerscripts.html
This commit removes the `MockTcpTransport` as a transport option for
`ESIntegTestCase`. It is the first step in replacing the usages of
`MockTcpTransport` with `MockNioTransport`.
If `dpkg` fails, try and look for who has `/var/lib/dpkg/lock` open. If
it exists and is open then return a failure with information about who
has file open. This should help us debug #33762.
Closes#34309
The `wait_for_metadata_version` parameter will instruct the cluster state
api to only return a cluster state until the metadata's version is equal or
greater than the version specified in `wait_for_metadata_version`. If
the specified `wait_for_timeout` has expired then a timed out response
is returned. (a response with no cluster state and wait for timed out flag set to true)
In the case metadata's version is equal or higher than `wait_for_metadata_version`
then the api will immediately return.
This feature is useful to avoid external components from constantly
polling the cluster state to whether somethings have changed in the
cluster state's metadata.
* Swithc to jcenter
Jcenter suposedly operates on a CDN.
It should be faster and more reliable.
It's the default in Andorid Studio currently
( it switched from mavenCentral ).
This change is safe because jcenter is a superset of mavenCentral.
* update comment
Some very old ancient versions of Linux do not have /etc/os-release. For
example, old Red Hat-like OS. This commit adds a fallback for handling
pretty name for these OS.
Some OS (e.g., Oracle Linux Server 6.9) have a trailing space at the end
of the PRETTY_NAME line in /etc/os-release. This commit addresses this
by accounting for this trailing space when extracting the pretty name.
* DISCOVERY: Fix RollingUpgradeTests
* Don't manually manage min master nodes if not necessary
* Remove some dead code
* Allow for manually supplying list of seed nodes
* Closes#35178
Today our OS information returned in node stats only returns a
high-level name of the OS (e.g., "Linux"). Yet, for some uses this is
too high-level and knowing at a finer level of granularity the
underlying OS can be useful. This commit extracts the pretty name on
Linux from /etc/os-release. This pretty name usually includes the Linux
vendor and the Linux vendor version number (e.g., Fedora 28).
With this change, `Version` no longer carries information about the qualifier,
we still need a way to show the "display version" that does have both
qualifier and snapshot. This is now stored by the build and red from `META-INF`.
Stop passing `Settings` to `AbstractComponent`'s ctor. This allows us to
stop passing around `Settings` in a *ton* of places. While this change
touches many files, it touches them all in fairly small, mechanical
ways, doing a few things per file:
1. Drop the `super(settings);` line on everything that extends
`AbstractComponent`.
2. Drop the `settings` argument to the ctor if it is no longer used.
3. If the file doesn't use `logger` then drop `extends
AbstractComponent` from it.
4. Clean up all compilation failure caused by the `settings` removal
and drop any now unused `settings` isntances and method arguments.
I've intentionally *not* removed the `settings` argument from a few
files:
1. TransportAction
2. AbstractLifecycleComponent
3. BaseRestHandler
These files don't *need* `settings` either, but this change is large
enough as is.
Relates to #34488
The java yaml test runner supports sending request headers, yet not all clients support headers. This commit makes sure that we enforce adding a skip section with feature "headers" whenever headers are used in a do section as part of a test. That decreases the chance for new tests to break client builds due to the missing skip section.
Closes#34650
Drops the `Settings` member from `AbstractComponent`, moving it from the
base class on to the classes that use it. For the most part this is a
mechanical change that doesn't drop `Settings` accesses. The one
exception to this is naming threads where it switches from an invocation
that passes `Settings` and extracts the node name to one that explicitly
passes the node name.
This change doesn't drop the `Settings` argument from
`AbstractComponent`'s ctor because this change is big enough as is.
We'll do that in a follow up change.
Drops the `deprecationLogger` from `AbstractComponent`, moving it to
places where we need it. This saves us from building a bunch of
`DeprecationLogger`s that we don't need.
Relates to #34488
The pull request #34338 added strict deprecation mode to the REST tests
and adds the copy_settings param when testing the shrink of an index.
This parameter has been added in 6.4.0 and will be removed in 8.0, so
the test now needs to take care of the old cluster version when adding
the copy_settings param.
After discussing on the team's FixItFriday, we concluded that
static final instance variables that are mutable should be lowercased.
Historically, DeprecationLogger was uppercased more frequently than lowercased.
#33708 introduced a strict deprecation mode that makes a REST request
fail if there is a warning header in the response returned by
Elasticsearch (usually a deprecation message signaling that a feature
or a field has been deprecated).
This change adds the strict deprecation mode into the REST integration
tests, and makes the tests fail if a deprecated feature is used. Also
any test using a deprecated feature has been modified to pass the build.
The YAML integration tests already analyzed HTTP warnings so they do
not use this mode, keeping their "expected vs actual" behavior.
Today we index the same number of documents (50 documents) in each round
of the rolling upgrade tests. If the actual count does not match, we can
not guess the problematic round.
Relates #27650
#32281 adds elasticsearch-shard to provide bwc version of elasticsearch-translog for 6.x; have to remove elasticsearch-translog for 7.0
Relates to #31389
If a shard was serving as a replica when another shard was promoted to
primary, then its Lucene index was reset to the global checkpoint.
However, if the new primary fails before the primary/replica resync
completes and we are now being promoted, we have to restore the reverted
operations by replaying the translog to avoid losing acknowledged writes.
Relates #33473
Relates #32867
Changes the default of the `node.name` setting to the hostname of the
machine on which Elasticsearch is running. Previously it was the first 8
characters of the node id. This had the advantage of producing a unique
name even when the node name isn't configured but the disadvantage of
being unrecognizable and not being available until fairly late in the
startup process. Of particular interest is that it isn't available until
after logging is configured. This forces us to use a volatile read
whenever we add the node name to the log.
Using the hostname is available immediately on startup and is generally
recognizable but has the disadvantage of not being unique when run on
machines that don't set their hostname or when multiple elasticsearch
processes are run on the same host. I believe that, taken together, it
is better to default to the hostname.
1. Running multiple copies of Elasticsearch on the same node is a fairly
advanced feature. We do it all the as part of the elasticsearch build
for testing but we make sure to set the node name then.
2. That the node.name defaults to some flavor of "localhost" on an
unconfigured box feels like it isn't going to come up too much in
production. I expect most production deployments to at least set the
hostname.
As a bonus, production deployments need no longer set the node name in
most cases. At least in my experience most folks set it to the hostname
anyway.
In #33241 we moved the file-based discovery functionality to core
Elasticsearch, but preserved the `discovery-file` plugin, and support for the
existing location of the `unicast_hosts.txt` file, for BWC reasons. This commit
completes the removal of this plugin.
New plugin for annotated_text field type.
Largely a copy of `text` field type but adds ability to include markdown-like syntax in the text.
The “AnnotatedText” class parses text+markup and converts into plain text and AnnotationTokens.
The annotation token values are injected unchanged alongside the regular text tokens to provide a
form of additional indexed overlay useful in positional searches and highlighting.
Annotated_text fields do not support fielddata as we want to phase this out.
Also includes a new "annotated" highlighter type that retains annotations and merges in search
hits as additional annotation markup.
Closes#29467
The skip_unavailable setting did not exist until 6.1.0. This means that
we need to skip this test on versions prior to 6.1.0. We need to use
this setting because otherwise we will fail startup without it (since we
are not setting up a real remote cluster connection). This commit adds a
skip for all versions prior to 6.1.0.
The change to upgrade cross-cluster search settings was backported to
6.5.0. Therefore, this assumption needs to be reduced to the latest
version where settings were not automatically upgraded.
This commit adds settings upgraders for the search.remote.* settings
that can be in the cluster state to automatically upgrade these settings
to cluster.remote.*. Because of the infrastructure that we have here,
these settings can be upgraded when recovering the cluster state, but
also when a user tries to make a dynamic update for these settings.
These logs are incredibly verbose, and it makes chasing normal failures
burdensome. This commit removes the debug logging, which can be
reenabled again if needed.
Clean up on top of the last fix: if we skip the entire test case then
the test run would fail because we skipped all the tests. This adds a
dummy test case to prevent that. It is a fairly nasty work around I plan
to work on something that makes this not required any more anyway.
If we're running on a platform where we can't install syscall filters
Elasticsearch logs a message before it reads the data directory to get
the node name. Because that log message doesn't have a node name this
test will fail. Since we mostly run the test on OSes where we *can*
install the syscall filters we can fairly safely skip the test on OSes
where we can't install the syscall filters.
Closes#33540
Today when checking settings dependencies, we do not check if fallback
settings are present. This means, for example, that if
cluster.remote.*.seeds falls back to search.remote.*.seeds, and
cluster.remote.*.skip_unavailable and search.remote.*.skip_unavailable
depend on cluster.remote.*.seeds, and we have set search.remote.*.seeds
and search.remote.*.skip_unavailable, then validation will fail because
it is expected that cluster.ermote.*.seeds is set here. This commit
addresses this by also checking fallback settings when validating
dependencies. To do this, we adjust the settings exist method to also
check for fallback settings, a case that it was not handling previously.
Change the logging infrastructure to handle when the node name isn't
available in `elasticsearch.yml`. In that case the node name is not
available until long after logging is configured. The biggest change is
that the node name logging no longer fixed at pattern build time.
Instead it is read from a `SetOnce` on every print. If it is unset it is
printed as `unknown` so we have something that fits in the pattern.
On normal startup we don't log anything until the node name is available
so we never see the `unknown`s.
When we rollover and index we write the conditions of the rollover that
the old index met into the old index. Loading this index metadata
requires a working `NamedXContentRegistry` that has been populated with
parsers from the rollover infrastructure. We had a few loads that didn't
use a working `NamedXContentRegistry` and so would fail if they ever
encountered an index that had been rolled over. Here are the locations
of the loads and how I fixed them:
* IndexFolderUpgrader - removed entirely. It existed to support opening
indices made in Elasticsearch 2.x. Since we only need this change as far
back as 6.4.1 which will supports reading from indices created as far
back as 5.0.0 we should be good here.
* TransportNodesListGatewayStartedShards - wired the
`NamedXContentRegistry` into place.
* TransportNodesListShardStoreMetaData - wired the
`NamedXContentRegistry` into place.
* OldIndexUtils - removed entirely. It existed to support the zip based
index backwards compatibility tests which we've since replaced with code
that actually runs old versions of Elasticsearch.
In addition to fixing the actual problem I added full cluster restart
integration tests for rollover which would have caught this problem and
I added an extra assertion to IndexMetaData's deserialization code which
will trip if we try to deserialize and index's metadata without a fully
formed `NamedXContentRegistry`. It won't catch if use the *wrong*
`NamedXContentRegistry` but it is better than nothing.
Closes#33316
With features like CCR building on the CCS infrastructure, the settings
prefix search.remote makes less sense as the namespace for these remote
cluster settings than does a more general namespace like
cluster.remote. This commit replaces these settings with cluster.remote
with a fallback to the deprecated settings search.remote.
In our Netty layer we have had to take extra precautions against Netty
catching throwables which prevents them from reaching the uncaught
exception handler. This code has taken on additional uses in NIO layer
and now in the scheduler engine because there are other components in
stack traces that could catch throwables and suppress them from reaching
the uncaught exception handler. This commit is a simple cleanup of the
iterative evolution of this code to refactor all uses into a single
method in ExceptionsHelper.
This reworks how we configure the `shadow` plugin in the build. The major
change is that we no longer bundle dependencies in the `compile` configuration,
instead we bundle dependencies in the new `bundle` configuration. This feels
more right because it is a little more "opt in" rather than "opt out" and the
name of the `bundle` configuration is a little more obvious.
As an neat side effect of this, the `runtimeElements` configuration used when
one project depends on another now contains exactly the dependencies needed
to run the project so you no longer need to reference projects that use the
shadow plugin like this:
```
testCompile project(path: ':client:rest-high-level', configuration: 'shadow')
```
You can instead use the much more normal:
```
testCompile "org.elasticsearch.client:elasticsearch-rest-high-level-client:${version}"
```
WildflyIT test fails in a FIPS JVM due to the amount of output in stderr. The excessive stderr output is due to https://bugs.openjdk.java.net/browse/JDK-8202893 and is not an indication of a failure that should be tracked.
This commit adjusts the limit to something more lenient that would allow the test to succeed.
Reverts #32543
Remove a few of the logger constructors that aren't widely used or
aren't used at all and deprecate a few more logger constructors in favor
of log4j2's `LogManager`.
On some Linux distributions tmpfiles.d cleans files and
directories under /tmp if they haven't been accessed for
10 days.
This can cause problems for ML as ML is currently the only
component that uses the temp directory more than a few
seconds after startup. If you didn't open an ML job for
10 days and then tried to open one then the temp directory
would have been deleted.
This commit prevents the problem occurring in the case of
Elasticsearch being managed by systemd, as systemd private
temp directories are not subject to periodic cleanup (by
default).
Additionally there are now some docs to warn people about
the risk and suggest a manual mitigation for .tar.gz users.
First, some background: we have 15 different methods to get a logger in
Elasticsearch but they can be broken down into three broad categories
based on what information is provided when building the logger.
Just a class like:
```
private static final Logger logger = ESLoggerFactory.getLogger(ActionModule.class);
```
or:
```
protected final Logger logger = Loggers.getLogger(getClass());
```
The class and settings:
```
this.logger = Loggers.getLogger(getClass(), settings);
```
Or more information like:
```
Loggers.getLogger("index.store.deletes", settings, shardId)
```
The goal of the "class and settings" variant is to attach the node name
to the logger. Because we don't always have the settings available, we
often use the "just a class" variant and get loggers without node names
attached. There isn't any real consistency here. Some loggers get the
node name because it is convenient and some do not.
This change makes the node name available to all loggers all the time.
Almost. There are some caveats are testing that I'll get to. But in
*production* code the node name is node available to all loggers. This
means we can stop using the "class and settings" variants to fetch
loggers which was the real goal here, but a pleasant side effect is that
the ndoe name is now consitent on every log line and optional by editing
the logging pattern. This is all powered by setting the node name
statically on a logging formatter very early in initialization.
Now to tests: tests can't set the node name statically because
subclasses of `ESIntegTestCase` run many nodes in the same jvm, even in
the same class loader. Also, lots of tests don't run with a real node so
they don't *have* a node name at all. To support multiple nodes in the
same JVM tests suss out the node name from the thread name which works
surprisingly well and easy to test in a nice way. For those threads
that are not part of an `ESIntegTestCase` node we stick whatever useful
information we can get form the thread name in the place of the node
name. This allows us to keep the logger format consistent.
This recreates a test that was added to the bats packaging tests
in #31343 but didn't make it over to the java project during when the
linux package tests were ported in #31943
When packages are installed but can not locate the java executable, they
should fail with a descriptive message
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `qa/full-cluster-restart` project to use the new
versions.
It also fixes a small bug in the test for explain on the `_all` field
that was causing it to not properly invoke `_explain`.
* Remove BouncyCastle dependency from runtime
This commit introduces a new gradle project that contains
the classes that have a dependency on BouncyCastle. For
the default distribution, It builds a jar from those and
in puts it in a subdirectory of lib
(/tools/security-cli) along with the BouncyCastle jars.
This directory is then passed in the
ES_ADDITIONAL_CLASSPATH_DIRECTORIES of the CLI tools
that use these classes.
BouncyCastle is removed as a runtime dependency (remains
as a compileOnly one) from x-pack core and x-pack security.
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `qa/rolling-upgrade` project to use the new
versions.
Add packaging tests for the linux package distributions to the java test
project and remove them from bats. Most of the tests that lived in
30_deb_package.bats and 40_rpm_package.bats are applicable to both
package types and are combined into a single type of test case. Others
are separated out into separate cases to make their intent more clear
For #26741
Use the randomized runner from the test framework and add some basic
logging to make the packaging tests behave more similarly to how we use
junit in the rest of the project
We have been encountering name mismatches between API defined in our
REST spec and method names that have been added to the high-level REST
client. We should check this automatically to prevent furher mismatches,
and correct all the current ones.
This commit adds a test for this and corrects the issues found by it.
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes most of the calls not in X-Pack to their new versions.
The `:x-pack:protocol` project is an implementation detail shared by the
xpack projects and the high level rest client and really doesn't deserve
its own maven coordinants and published javadoc. This change bundles
`:x-pack:protocol` into the high level rest client.
Relates to #29827
Recreates the rest of the bats packaging tests for the tar distribution
in the java packaging test project, with support for both tar and zip
packaging, both oss and default flavors, and on Linux and Windows. Most
tests are followed fairly closely, some have either been dropped if
unnecessary or folded into others if convenient.
So the issue here is that we want to avoid setting vm.max_map_count if
it is already equal to the desired value (the bootstrap check requires
262144). The reason we want to avoid this is because in some use-cases
using sysctl to set this will fail. In this case, we want to enable
users to set this value externally and then allow that to cause using
sysctl to set the value to be skipped so that cases where using sysctl
will fail to no longer fail.
Merges the `query-builder-bwc` qa project into the
`full-cluster-restart` qa project, saving a cluster starts on every
build and *many* cluster starts on `./gradlew bwcTests`.
This creates a YAML test "features" that indices if the cluster being
tested has xpack installed (`xpack`) or if it does *not* have xpack
installed (`no_xpack`). It uses those features to centralize skipping
a few tests that fail if xpack is installed.
The plan is to use this in a followup to skip docs tests that require
xpack when xpack is not installed. We *plan* to use the declaration
of required license level on the docs page to generate the required
`skip`.
Closes#30933.
The package installation relies on java being in the path. If java is
not in the path, the tests fail at post-install time. This commit adds a
pre-install check to validate that java exists, and if it fails, the
package is never installed, and thus keeps a system clean, rather than
aborting at post-install and leaving behind a mess.
Closes#29665
Although the master branch does not affect by #31482, it's helpful to
have BWC tests that verify the peer recovery with a synced-flush index.
This commit adds the bwc tests from #31506 to the master branch.
Relates #31482
Relates #31506
TransportRequestHandler currently contains 2 messageReceived methods,
one which takes a Task, and one that does not. The first just delegates
to the second. This commit changes all existing implementors of
TransportRequestHandler to implement the version which takes Task, thus
allowing the class to be a functional interface, and eliminating the
need to throw exceptions when a task needs to be ensured.
This change moves tests in `smoke-test-rank-eval-with-mustache` into the main
ranking evaluation module by declaring that the integration testing cluster
requires the `lang-mustache` plugin. This avoids having to maintain the qa
project for only one basic test suite.
This commit modifies the Sys V init startup scripts to only modify
vm.max_map_count if needed. In this case, needed means that the current
value is less than our default value of 262144 maps.
If you run `./gradlew -p qa bwcTest -Dtests.distribution=zip` then we
need to resolve older versions of the default distribution. Since those
aren't available in maven central, we need add the elastic maven repo to
the project.
This commit upgrades us to Netty 4.1.25. This upgrade is more
challenging than past upgrades, all because of a new object cleaner
thread that they have added. This thread requires an additional security
permission (set context class loader, needed to avoid leaks in certain
scenarios). Additionally, there is not a clean way to shutdown this
thread which means that the thread can fail thread leak control during
tests. As such, we have to filter this thread from thread leak control.
Use all running nodes as unicast seeds in the rolling restart tests to
avoid a race between pinging and the tests. Without this if the tests
are too fast then when a new node comes up and pings its single
configured seed node that node *might* not have a ping from the other
running node.
This is related to #27260 and #28898. This commit adds the transport-nio
plugin as a random option when running the http smoke tests. As part of
this PR, I identified an issue where cors support was not properly
enabled causing these tests to fail when using transport-nio. This
commit also fixes that issue.
With #30490 we have introduced a new way to provide request options
whenever sending a request using the high-level REST client. Before you
could provide headers as the last argument varargs of each API method,
now you can provide `RequestOptions` that in the future will allow to
provide more options which can be specified per request.
This commit deprecates all of the client methods that accept a `Header`
varargs argument in favour of new methods that accept `RequestOptions`
instead. For some API we don't even go through deprecation given that
they were not released since they were added, hence in that case we can
just move them to the new method.
This is much more realistic and can find more issues. This causes the
"mixed cluster" tests to be run twice so I had to fix the tests to work
in that case. In most cases I did as little as possible to get them
working but in a few cases I went a little beyond that to make them
easier for me to debug while getting them to work. My test changes:
1. Remove the "basic indexing" tests and replace them with a copy of the
tests used in the OSS. We have no way of sharing code between these two
projects so for now I copy.
2. Skip the a few tests in the "one third" upgraded scenario:
* creating a scroll to be reused when the cluster is fully upgraded
* creating some ml data to be used when the cluster is fully ugpraded
3. Drop many "assert yellow and that the cluster has two nodes"
assertions. These assertions duplicate those made by the wait condition
and they fail now that we have three nodes.
4. Switch many "assert green and that the cluster has two nodes" to 3
nodes. These assertions are unique from the wait condition and, while
I imagine they aren't required in all cases, now is not the time to
find that out. Thus, I made them work.
5. Rework the index audit trail test so it is more obvious that it is
the same test expecting different numbers based on the shape of the
cluster. The conditions for which number are expected are fairly
complex because the index audit trail is shut down until the template
for it is upgraded and the template is upgraded when a master node is
elected that has the new version of the software.
6. Add some more information to debug the index audit trail test because
it helped me figure out what was going on.
I also dropped the `waitCondition` from the `rolling-upgrade-basic`
tests because it wasn't needed.
Closes#25336
In case an error is returned when calling search_shards on a remote
cluster, which will lead to throwing an exception in the coordinating
node, we should make sure that the status code returned by the
coordinating node is the same as the one returned by the remote
cluster. Up until now a 500 - Internal Server Error was always
returned. This commit changes this behaviour so that for instance if an
index is not found, which causes an 404, a 404 is also returned by the
coordinating node to the client.
Closes#27461
This modifies the high level rest client to allow calling code to
customize per request options for the bulk API. You do the actual
customization by passing a `RequestOptions` object to the API call
which is set on the `Request` that is generated by the high level
client. It also makes the `RequestOptions` a thing in the low level
rest client. For now that just means you use it to customize the
headers and the `httpAsyncResponseConsumerFactory` and we'll add
node selectors and per request timeouts in a follow up.
I only implemented this on the bulk API because it is the first one
in the list alphabetically and I wanted to keep the change small
enough to review. I'll convert the remaining APIs in a followup.
Currently failures to compile a script usually lead to a ScriptException, which
inherits the 500 INTERNAL_SERVER_ERROR from ElasticsearchException if it does
not contain another root cause. Instead, this should be a 400 Bad Request error.
This PR changes this more generally for script compilation errors by changing
ScriptException to return 400 (bad request) as status code.
Closes#12315
When subprocesses are started with ProcessBuilder, they're forked by the
java process directly rather than from a shell, which can be surprising
for our use case here in the packaging tests which is similar to
scripting.
This commit changes the tests to run their subprocess commands in a
shell, using the bash -c <script> syntax for commands on linux and using
the powershell.exe -Command <script> syntax for commands on windows.
This syntax on windows is essentially what the tests were already doing.
Ports the first couple tests for archive distributions from the old bats
project to the new java project that includes windows platforms,
consolidating them into one test method that tests that the
distributions can be extracted and their contents verified. Includes the
zip distributions which were not tested in the bats project.
A rolling upgrade from oss Elasticsearch to the default distribution of
Elasticsearch is significantly different than a full cluster restart to
install a plugin and is again different from starting a new cluster with
xpack installed. So this adds some basic tests to make sure that the
rolling upgrade that enables xpack works at all.
This also removes some unused imports from the tests that I modified in
PR #30728. I didn't mean to leave them.
Adding headers rather than setting them all at once seems more
user-friendly and we already do it in a similar way for parameters
(see Request#addParameter).
Switches the rolling upgrade tests from upgrading two nodes to upgrading
three nodes which is much more realistic and much better able to find
unexpected bugs. It upgrades the nodes one at a time and runs tests
between each upgrade. As such this now has four test runs:
1. Old
2. One third upgraded
3. Two thirds upgraded
4. Upgraded
It sets system properties so the tests can figure out which stage they
are in. It reuses the same yml tests for the "one third" and "two
thirds" cases because they are *almost* the same case.
This rewrites the yml-based indexing tests to be Java based because the
yml-based tests can't handle different expected values for the counts.
And the indexing tests need that when they are run twice.
Meta plugins existed only for a short time, in order to enable breaking
up x-pack into multiple plugins. However, now that x-pack is no longer
installed as a plugin, the need for them has disappeared. This commit
removes the meta plugins infrastructure.
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the the old requests. This
changes many calls in the `qa` projects to use the new version.
This configures all `qa` projects to use the distribution contained in
the `tests.distribution` system property if it is set. The goal is to
create a simple way to run tests against the default distribution which
has x-pack basic features enabled while not forcing these tests on all
contributors. You run these tests by doing something like:
```
./gradlew -p qa -Dtests.distribution=zip check
```
or
```
./gradlew -p qa -Dtests.distribution=zip bwcTest
```
x-pack basic *shouldn't* get in the way of any of these tests but
nothing is ever perfect so this we have to disable a few when running
with the zip distribution.
This commit changes the default out-of-the-box configuration for the
number of shards from five to one. We think this will help address a
common problem of oversharding. For users with time-based indices that
need a different default, this can be managed with index templates. For
users with non-time-based indices that find they need to re-shard with
the split API in place they no longer need to resort only to
reindexing.
Since this has the impact of changing the default number of shards used
in REST tests, we want to ensure that we still have coverage for issues
that could arise from multiple shards. As such, we randomize (rarely)
the default number of shards in REST tests to two. This is managed via a
global index template. However, some tests check the templates that are
in the cluster state during the test. Since this template is randomly
there, we need a way for tests to skip adding the template used to set
the number of shards to two. For this we add the default_shards feature
skip. To avoid having to write our docs in a complicated way because
sometimes they might be behind one shard, and sometimes they might be
behind two shards we apply the default_shards feature skip to all docs
tests. That is, these tests will always run with the default number of
shards (one).
Currently the ranking evaluation API accepts the full query syntax for
the queries specified in the evaluation set and executes them via multi
search. This potentially runs costly aggregations and suggestions too.
This change adds checks that forbid using aggregations, suggesters,
highlighters and the explain and profile options in the queries that are
run as part of the ranking evaluation since they are irrelevent in the
context of this API.
This folds the `:qa:smoke-test-reindex-with-all-modules` project into
`:modules:reindex` by declaring the reindex's integration testing
cluster requires the `parent-join` and `lang-painless` plugins and then
moving all of the integration tests that depended on parent-join and
painless into reindex.
It saves us one cluster start up during the build at the cost of a
little of the reindex module's "purity". Since the reindex module *does*
have unit tests that test scripting without painless I'm fairly ok with
that.
Today when processing a request for a URL path for which we can not find
a handler we send back a plain-text response. Yet, we have the accept
header in our hand and can respect the accepted media type of the
request. This commit addresses this.
This commit adds setting the homedir for the elasticsearch user to the
adduser command in the packaging preinstall script. While the
elasticsearch user is a system user, it is sometimes conventient to have
an existing homedir (even if it is not writeable). For example, running
cron as the elasticsearch user will try to change dir to the homedir.
closes#14453
This commit removes the http.enabled setting. While all real nodes (started with bin/elasticsearch) will always have an http binding, there are many tests that rely on the quickness of not actually needing to bind to 2 ports. For this case, the MockHttpTransport.TestPlugin provides a dummy http transport implementation which is used by default in ESIntegTestCase.
closes#12792
Systemd overrides should happen through /etc/systemd/system, not
directly editing the service file. This commit removes marking the
service file as configuration for rpm and deb packages.
Many tests are added with a version check so that they do not run against a
version that doesn't have the feature yet. Master is 7.0, so all tests that
do not run against 6.0+ can be removed and the version check can be removed
on all tests that always run on 6.0+.
[test] add java packaging test project
Adds a project for building and running packaging tests written in java
for portability. The vagrant tasks use jars on the packagingTest
configuration, which are built in the same project. No tests are added
yet.
Corresponding changes are not made to :x-pack:qa:vagrant because the
java packaging tests will all be consolidated into one project.
For #26741
This folds the `:qa:reindex-from-old` project into the `:modules:reindex`
project. This should speed up the build marginally by removing a single
clsuter start up at the cost of having to wait for old versions of
Elasticsearch to start up when checking reindex's integration tests.
Those don't take that long so this feels worth it.
This commit moves the repository-s3 fixture test added in #29296 in a
new `repository-s3/qa/amazon-s3` project. This new project allows the
REST integration tests to be executed using the real S3 service when
all the required environment variables are provided. When no env var
is provided, then the tests are executed using the fixture added
in #29296.
The REST tests located at the `repository-s3`plugin project now only
verify that the plugin is correctly loaded.
The REST tests have been adapted to allow a bucket name and a base
path to be specified as env vars. This way it is possible to run the tests
with different base paths (could be anything, like a CI job name or a
branch name) without multiplicating buckets.
Related to #29349
Add the oss tar distribution to the packaging test plugin. Test the oss
tar distribution in the core packaging tests, and the non-oss tar
distribution in the x-pack packaging tests.
The packaging tests for Debian based distro is loooking
for docs in /usr/share/elasticsearch, but it should be
/usr/share/elasticsearch-oss for the oss package.
This commit makes x-pack a module and adds it to the default
distrubtion. It also creates distributions for zip, tar, deb and rpm
which contain only oss code.
This commit moves the checks on JAVAX_HOME (where X is the java version
number) existing to the end of gradle's configuration phase, and based
on whether the tasks needing the java home are configured to execute.
relates #29519
The test was using a parameter on GET /_cluster/health that older nodes
do not understand. Yet, we do no even need to make this call here, we
can use ensure green for the index.
Henning Andersen
Mayya Sharipova
markharwood
Nhat Nguyen
Julie Tibshirani
Luca Cavanna
Tanguy Leroux
David Turner
David Roberts
Adrien Grand
Jim Ferenczi
Tim Vernum
Ryan Ernst
Przemyslaw Gomulka
Martijn van Groningen
Alexander Reelsen
Andrey Ershov
Alpar Torok
Boaz Leskes
Yannick Welsch
Jason Tedor
Armin Braun
Tal Levy
Nik Everett
Dimitrios Liappis
Tim Brooks
lipsill
Ioannis Kakavas
Kazuhiro Sera
Vladimir Dolzhenko
Or Bin
Igor Motov
Andy Bristol
David Kyle
Ben Abrams
Michael Basnight
Christoph Büscher