The parser for the Metric config was directly instantiating
the config object, rather than using the builder. That means it was
bypassing the validation logic built into the builder, and would allow
users to create invalid metric configs (like using unsupported metrics).
The job would later blow up and abort due to bad configs, but this isn't
immediately obvious to the user since the PutJob API succeeded.
This change prevents a datafeed using cross cluster search from starting if the remote cluster
does not have x-pack installed and a sufficient license. The check is made only when starting a
datafeed.
Rules allow users to supply a detector with domain
knowledge that can improve the quality of the results.
The model detects statistically anomalous results but it
has no knowledge of the meaning of the values being modelled.
For example, a detector that performs a population analysis
over IP addresses could benefit from a list of IP addresses
that the user knows to be safe. Then anomalous results for
those IP addresses will not be created and will not affect
the quantiles either.
Another example would be a detector looking for anomalies
in the median value of CPU utilization. A user might want
to inform the detector that any results where the actual
value is less than 5 is not interesting.
This commit introduces a `custom_rules` field to the `Detector`.
A detector may have multiple rules which are combined with `or`.
A rule has 3 fields: `actions`, `scope` and `conditions`.
Actions is a list of what should happen when the rule applies.
The current options include `skip_result` and `skip_model_update`.
The default value for `actions` is the `skip_result` action.
Scope is optional and allows for applying filters on any of the
partition/over/by field. When not defined the rule applies to
all series. The `filter_id` needs to be specified to match the id
of the filter to be used. Optionally, the `filter_type` can be specified
as either `include` (default) or `exclude`. When set to `include`
the rule applies to entities that are in the filter. When set to
`exclude` the rule only applies to entities not in the filter.
There may be zero or more conditions. A condition requires `applies_to`,
`operator` and `value` to be specified. The `applies_to` value can be
either `actual`, `typical` or `diff_from_typical` and it specifies
the numerical value to which the condition applies. The `operator`
(`lt`, `lte`, `gt`, `gte`) and `value` complete the definition.
Conditions are combined with `and` and allow to specify numerical
conditions for when a rule applies.
A rule must either have a scope or one or more conditions. Finally,
a rule with scope and conditions applies when all of them apply.
TransportAction has many variants of execute. One of those variants
executes by returning a future, which is then often blocked on by
calling get(). This commit removes this variant of execute, instead
using a helper method for tests that want to block, or having tests
pass in a PlainActionFuture directly as a listener.
Co-authored-by: Simon Willnauer <simonw@apache.org>
* Support RequestedAuthnContext
This implements limited support for RequestedAuthnContext by :
- Allowing SP administrators to define a list of authnContextClassRef
to be included in the RequestedAuthnContext of a SAML Authn Request
- Veirifying that the authnContext in the incoming SAML Asertion's
AuthnStatement contains one of the requested authnContextClassRef
- Only EXACT comparison is supported as the semantics of validating
the incoming authnContextClassRef are deployment dependant and
require pre-established rules for MINIMUM, MAXIMUM and BETTER
Also adds necessary AuthnStatement validation as indicated by [1] and
[2]
[1] https://docs.oasis-open.org/security/saml/v2.0/saml-core-2.0-os.pdf
3.4.1.4, line 2250-2253
[2] https://kantarainitiative.github.io/SAMLprofiles/saml2int.html
[SDP-IDP10]
Trying to post a new watch without any body currently results in a
NullPointerException. This change fixes that by validating that
Post and Put requests always have a body.
Closes#30057
Allows users of the Low Level REST client to specify which hosts a
request should be run on. They implement the `NodeSelector` interface
or reuse a built in selector like `NOT_MASTER_ONLY` to chose which nodes
are valid. Using it looks like:
```
Request request = new Request("POST", "/foo/_search");
RequestOptions options = request.getOptions().toBuilder();
options.setNodeSelector(NodeSelector.NOT_MASTER_ONLY);
request.setOptions(options);
...
```
This introduces a new `Node` object which contains a `HttpHost` and the
metadata about the host. At this point that metadata is just `version`
and `roles` but I plan to add node attributes in a followup. The
canonical way to **get** this metadata is to use the `Sniffer` to pull
the information from the Elasticsearch cluster.
I've marked this as "breaking-java" because it breaks custom
implementations of `HostsSniffer` by renaming the interface to
`NodesSniffer` and by changing it from returning a `List<HttpHost>` to a
`List<Node>`. It *shouldn't* break anyone else though.
Because we expect to find it useful, this also implements `host_selector`
support to `do` statements in the yaml tests. Using it looks a little
like:
```
---
"example test":
- skip:
features: host_selector
- do:
host_selector:
version: " - 7.0.0" # same syntax as skip
apiname:
something: true
```
The `do` section parses the `version` string into a host selector that
uses the same version comparison logic as the `skip` section. When the
`do` section is executed it passed the off to the `RestClient`, using
the `ElasticsearchHostsSniffer` to sniff the required metadata.
The idea is to use this in mixed version tests to target a specific
version of Elasticsearch so we can be sure about the deprecation
logging though we don't currently have any examples that need it. We do,
however, have at least one open pull request that requires something
like this to properly test it.
Closes#21888
This commit upgrades us to Netty 4.1.25. This upgrade is more
challenging than past upgrades, all because of a new object cleaner
thread that they have added. This thread requires an additional security
permission (set context class loader, needed to avoid leaks in certain
scenarios). Additionally, there is not a clean way to shutdown this
thread which means that the thread can fail thread leak control during
tests. As such, we have to filter this thread from thread leak control.
* master:
Move default location of dependencies report (#31228)
Remove dependencies report task dependencies (#31227)
Add recognition of MPL 2.0 (#31226)
Fix unknown licenses (#31223)
Remove version from license file name for GCS SDK (#31221)
Fully encapsulate LocalCheckpointTracker inside of the engine (#31213)
[DOCS] Added 'fail_on_unsupported_field' param to MLT. Closes#28008 (#31160)
Add licenses for transport-nio (#31218)
Remove DocumentFieldMappers#simpleMatchToFullName. (#31041)
Allow to trim all ops above a certain seq# with a term lower than X, post backport fix (#31211)
Compliant SAML Response destination check (#31175)
Remove DocumentFieldMappers#smartNameFieldMapper, as it is no longer needed. (#31018)
Remove extraneous references to 'tokenized' in the mapper code. (#31010)
Allow to trim all ops above a certain seq# with a term lower than X (#30176)
SQL: Make a single JDBC driver jar (#31012)
Enhance license detection for various licenses (#31198)
[DOCS] Add note about long-lived idle connections (#30990)
Move number of language analyzers to analysis-common module (#31143)
Default max concurrent search req. numNodes * 5 (#31171)
flush job to ensure all results have been written (#31187)
* Remove DocumentFieldMappers#simpleMatchToFullName, as it is duplicative of MapperService#simpleMatchToIndexNames.
* Rename MapperService#simpleMatchToIndexNames -> simpleMatchToFullName for consistency.
* Simplify EsIntegTestCase#assertConcreteMappingsOnAll to accept concrete fields instead of wildcard patterns.
Make SAML Response Destination check compliant
Only validate the Destination element of an incoming SAML Response
if Destination is present and the SAML Response is signed.
The standard [1] - 3.5.5.2 and [2] - 3.2.2 does mention that the
Destination element is optional and should only be verified when
the SAML Response is signed. Some Identity Provider implementations
are known to not set a Destination XML Attribute in their SAML
responses when those are not signed, so this change also aims to
enhance interoperability.
[1] https://docs.oasis-open.org/security/saml/v2.0/saml-bindings-2.0-os.pdf
[2] https://docs.oasis-open.org/security/saml/v2.0/saml-core-2.0-os.pdf
* elastic/master: (53 commits)
Painless: Restructure/Clean Up of Spec Documentation (#31013)
Update ignore_unmapped serialization after backport
Add back dropped substitution on merge
high level REST api: cancel task (#30745)
Enable engine factory to be pluggable (#31183)
Remove vestiges of animal sniffer (#31178)
Rename elasticsearch-nio to nio (#31186)
Rename elasticsearch-core to core (#31185)
Move cli sub-project out of server to libs (#31184)
[DOCS] Fixes broken link in auditing settings
QA: Better seed nodes for rolling restart
[DOCS] Moves ML content to stack-docs
[DOCS] Clarifies recommendation for audit index output type (#31146)
Add nio-transport as option for http smoke tests (#31162)
QA: Set better node names on rolling restart tests
Add support for ignore_unmapped to geo sort (#31153)
Share common parser in some AcknowledgedResponses (#31169)
Fix random failure on SearchQueryIT#testTermExpansionExceptionOnSpanFailure
Remove reference to multiple fields with one name (#31127)
Remove BlobContainer.move() method (#31100)
...
This is related to #27260 and #28898. This commit adds the transport-nio
plugin as a random option when running the http smoke tests. As part of
this PR, I identified an issue where cors support was not properly
enabled causing these tests to fail when using transport-nio. This
commit also fixes that issue.
Today if a user omits the `_source` entirely or modifies the source
on indexing we have no chance to re-create the document after it has
been added. This is an issue for CCR and recovery based on soft deletes
which we are going to make the default. This change adds an additional
recovery source if the source is disabled or modified that is only kept
around until the document leaves the retention policy window.
This change adds a merge policy that efficiently removes this extra source
on merge for all document that are live and not in the retention policy window
anymore.
This commit adjusts the indentation in the CLI scripts to give a clear
visual indication that the line being indented is a continuation of the
previous line.
SSLTrustRestrictionsTests updates the restrictions YML file during the test run to change the set of restrictions. This update was small, but it wasn't atomic.
If the yml file is reloaded while empty or invalid, then it causes all SSL certificates to be considered invalid (until it is reloaded again), which could break the sniffing/administrative client that runs underneath the tests.
A previous refactoring of the CLI scripts migrated all of the CLI tools
to shell to a common script, elasticsearch-cli. This approach is fine in
Bash where it is easy to tear arguments apart but it doesn't work so
well on Windows where quoting is insane. To avoid having to tear the
arguments apart to separate the first argument to elasticsearch-cli from
the remaining arguments, we instead choose a strategy where we can avoid
tearing the arguments apart. To do this, we will instead pass the main
class by an environment variable and then we can pass the arguments
straight through. This will let us avoid awful quoting issues on
Windows. This is the Windows side of that effort and the Bash side was
in a previous commit.
A previous refactoring of the CLI scripts migrated all of the CLI tools
to shell to a common script, elasticsearch-cli. This approach is fine in
Bash where it is easy to tear arguments apart but it doesn't work so
well on Windows where quoting is insane. To avoid having to tear the
arguments apart to separate the first argument to elasticsearch-cli from
the remaining arguments, we instead choose a strategy where we can avoid
tearing the arguments apart. To do this, we will instead pass the main
class by an environment variable and then we can pass the arguments
straight through. This will let us avoid awful quoting issues on
Windows. This is the non-Windows side of that effort and the Windows
side will be in a follow-up.
This is related to #27260. This commit combines the AcceptingSelector
and SocketSelector classes into a single NioSelector. This change
allows the same selector to handle both server and socket channels. This
is valuable as we do not necessarily want a dedicated thread running for
accepting channels.
With this change, this commit removes the configuration for dedicated
accepting selectors for the normal transport class. The accepting
workload for new node connections is likely low, meaning that there is
no need to dedicate a thread to this process.
The primary shard copy on the following has authority of the replication
operations that occur on the following side in cross-cluster
replication. Yet today we are using the primary term directly from the
operations on the leader side. Instead we should be replacing the
primary term on the following side with the primary term of the primary
on the following side. This commit does this by copying the translog
operations with the corrected primary term. This ensures that we use
this primary term while applying the operations on the primary, and when
replicating them across to the replica (where the replica request was
carrying the primary term of the primary shard copy on the follower).
The native realm's usage stats were previously pulled from the cache,
which only contains the number of users that had authenticated in the
past 20 minutes. This commit changes this so that we pull the current
value from the security index by executing a search request. In order
to support this, the usage stats for realms is now asynchronous so that
we do not block while waiting on the search to complete.
The Index Audit trail allows the override of the template index
settings with settings specified on the conf file.
A bug will manifest when such conf file settings are specified
for templates that need to be upgraded. The bug is an endless
upgrade loop because the upgrade, although successful, is
not reckoned as such by the upgrade service.
The old perform request methods on the REST client have been deprecated
in favor using request-flavored methods. This commit addresses the use
of these deprecated methods in the CCR test suite.
move `finger_print`, `pattern` and `standard_html_strip` analyzers
to analysis-common module. (both AnalysisProvider and PreBuiltAnalyzerProvider)
Changed PreBuiltAnalyzerProviderFactory to extend from PreConfiguredAnalysisComponent and
changed to make sure that predefined analyzers are always instantiated with the current
ES version and if an instance is requested for a different version then delegate to PreBuiltCache.
This is similar to the behaviour that exists today in AnalysisRegistry.PreBuiltAnalysis and
PreBuiltAnalyzerProviderFactory. (#31095)
Relates to #23658
This commit adds a check that any class in X-Pack that is a feature
aware custom also implements the appropriate mix-in interface in
X-Pack. These interfaces provide a default implementation of
FeatureAware#getRequiredFeature that returns that x-pack is the required
feature. By implementing this interface, this gives a consistent way for
X-Pack feature aware customs to return the appopriate required feature
and this check enforces that all such feature aware customs return the
appropriate required feature.
* elastic/master:
[DOCS] Creates rest-api folder in docs
[Rollup] Disallow index patterns that match the rollup index (#30491)
Add cors support to NioHttpServerTransport (#30827)
[DOCS] Fixes security example (#31082)
Allow terms query in _rollup_search (#30973)
We should not allow the user to configure index patterns that also match
the index which stores the rollup index.
For example, it is quite natural for a user to specify `metricbeat-*`
as the index pattern, and then store the rollups in `metricbeat-rolled`.
This will start throwing errors as soon as the rollup index is created
because the indexer will try to search it.
Note: this does not prevent the user from matching against existing
rollup indices. That should be prevented by the field-level validation
during job creation.
This snapshot includes:
- LUCENE-8341: Record soft deletes in SegmentCommitInfo which will resolve#30851
- LUCENE-8335: Enforce soft-deletes field up-front
* master:
Removing erroneous repeat
Adapt bwc versions after backporting #30983 to 6.4
[Tests] Muting RatedRequestsTests#testXContentParsingIsNotLenient
TEST: Retry synced-flush if ongoing ops on primary (#30978)
Fix docs build.
Only auto-update license signature if all nodes ready (#30859)
Add BlobContainer.writeBlobAtomic() (#30902)
Add a doc value format to binary fields. (#30860)
* master:
Add get mappings support to high-level rest client (#30889)
Fix index prefixes to work with span_multi (#31066)
[DOCS] Removes redundant authorization pages
[DOCS] Re-adds custom realm
Change ObjectParser exception (#31030)
Upgrade to Lucene-7.4.0-snapshot-0a7c3f462f (#31073)
* master:
Match phrase queries against non-indexed fields should throw an exception (#31060)
In the internal highlighter APIs, use the field type as opposed to the mapper. (#31039)
[DOCS] Removes duplicated authentication pages
Enable customizing REST tests blacklist (#31074)
Make sure KeywordFieldMapper#clone preserves split_queries_on_whitespace. (#31049)
[DOCS] Moves machine learning overview to stack-docs
[ML] Add secondary sort to ML events (#31063)
[Rollup] Specialize validation exception for easier management (#30339)
Adapt bwc versions after backporting #31045 to 6.3
Remove usage of explicit type in docs (#29667)
Share common readFrom/writeTo code in AcknowledgeResponse (#30983)
Adapt bwc versions after backporting #31045 to 6.x
Mute MatchPhrase*QueryBuilderTests
[Docs] Fix typo in watcher conditions documentation (#30989)
Remove wrong link in index phrases doc
Move pipeline APIs to ingest namespace (#31027)
[DOCS] Fixes accounting setting names (#30863)
[DOCS] Rewords _field_names documentation (#31029)
Index phrases (#30450)
Remove leftover debugging from PTCMDT
Fix PTCMDT#testMinVersionSerialization
Make Persistent Tasks implementations version and feature aware (#31045)
ObjectParser should throw XContentParseExceptions, not IAE. A dedicated parsing
exception can includes the place where the error occurred.
Closes#30605
This snapshot includes:
- LUCENE-8341: Record soft deletes in SegmentCommitInfo which will resolve#30851
- LUCENE-8335: Enforce soft-deletes field up-front
Extends ActionRequestValidationException with a rollup-specific version
to make it easier to handle mapping validation issues on the client
side.
The type will now be `rollup_action_request_validation_exception`
instead of `action_request_validation_exception`
The majority of Responses inheriting from AcknowledgeResponse implement
the readFrom and writeTo serialization method in the same way. Moving this
as a default into AcknowledgeResponse and letting the few exceptions that
need a slightly different implementation handle this themselves saves a lot
of duplication.
