Renamed the follow qa modules:
`multi-cluster-downgraded-to-basic-license` to `downgraded-to-basic-license`
`multi-cluster-with-non-compliant-license` to `non-compliant-license`
`multi-cluster-with-security` to `security`
Moved the `chain` module into the `multi-cluster` module and
changed the `multi-cluster` to start 3 clusters.
Followup from #36031
Today we expose a new engine immediately during Lucene rollback. The new
engine is started with a safe commit which might not include all
acknowledged operation. With this change, we won't expose the new engine
until it has recovered from the local translog.
Note that this solution is not complete since it's able to reserve only
acknowledged operations before the global checkpoint. This is because we
replay translog up to the global checkpoint during rollback. A per-doc
Lucene rollback would solve this issue entirely.
Relates #32867
Today, we iterate the bitset of hardLiveDocs to calculate the number of
live docs. This calculation might be expensive if we enable soft-deletes
(by default) for old indices whose soft-deletes was disabled previously
and had hard-deletes.
Once soft-deletes is enabled, we no longer hard-update or hard-delete
documents directly. We have hard-deletes in two scenarios: (1) from old
segments where soft-deletes was disabled, (2) when IndexWriter hits
non-aborted exceptions. These two cases, IW flushes SegmentInfos before
exposing the hard-deletes; thus we can use the hard-delete count of
SegmentInfos.
Creating `CompositeBytesReference` has more overhead than a single
`ByteBufferReference`. Many of our messages will be contained to a
single `ByteBuffer`. This commit avoids creating composite instances
when there is 0 or 1 underlying `ByteBuffers`.
We support rolling upgrades from Zen1 by keeping the master as a Zen1 node
until there are no more Zen1 nodes in the cluster, using the following
principles:
- Zen1 nodes will never vote for Zen2 nodes
- Zen2 nodes will, while not bootstrapped, vote for Zen1 nodes
- Zen2 nodes that were previously part of a mixed cluster will automatically
(and unsafely) bootstrap themselves when the last Zen1 node leaves.
This commit makes FormatDateTimeFormatter and DateFormatter apis close
to each other, so that the former can be removed in favor of the latter.
This PR does not change the uses of FormatDateTimeFormatter yet, so that
that future change can be purely mechanical.
This commit gets rid of the 'NONE' and 'INFO' severity levels for
deprecation issues.
'NONE' is unused and does not make much sense as a severity level.
'INFO' can be separated into two categories: Either 1) we can
definitively tell there will be a problem with the cluster/node/index
configuration that can be resolved prior to upgrade, in which case
the issue should be a WARNING, or 2) we can't, because any issues would
be at the application level, for which the user should review the
deprecation logs and/or response headers.
This is related to #35975. It implements a basic restore functionality
for the CcrRepository. When the restore process is kicked off, it
configures the new index as expected for a follower index. This means
that the index has a different uuid, the version is not incremented, and
the Ccr metadata is installed.
When the restore shard method is called, an empty shard is initialized.
This commit removes the parseDefaulting method from DateFormatter,
bringing it more inline with the joda equivalent
FormatDateTimeFormatter. This method was only needed for the java
time implementation of DateMathParser. Instead, a DateFormatter now
returns an implementation of DateMathParser for the given format,
allowing the java time implementation to construct the appropriate date
math parser internally.
ML jobs and datafeeds wrap collections into their unmodifiable
equivalents in their constructor. However, the copying builder
does not make a copy of some of those collections resulting
in wrapping those again and again. This can eventually result
to stack overflow.
This commit addressed this issue by copying the collections in
question in the copying builder constructor.
Closes#36360
We use MethodHandles.asType to cast argument types into the appropriate parameter types for
method calls when the target of the call is a def type at runtime. Currently, certain implicit casts
using the def type are asymmetric. It is possible to cast Integer -> float as an argument to parameter, but not from int -> Float (boxed to primitive with upcasting is okay, but primitive to
boxed with upcasting is not).
This PR introduces a solution to the issue by generating bridge methods for all whitelisted methods
that have at least a single boxed type as an argument. The bridge method will conduct appropriate
casts and then call the original method. This adds a bit of overhead for correctness. It should not be
used often as Painless avoids boxed types as much as possible.
Note that a large portion of this change is adding methods to do the appropriate def to boxed type
casts and a few mechanical changes as well. The most important method for review is
generateBridgeMethod in PainlessLookupBuilder.
* Add warning if cluster fails to form fast enough
Today if a leader is not discovered or elected then nodes are essentially
silent at INFO and above, and log copiously at DEBUG and below. A short delay
when electing a leader is not unusual, for instance if other nodes have not yet
started, but a persistent failure to elect a leader is a problem worthy of log
messages in the default configuration.
With this change, while there is no leader each node outputs a WARN-level log
message every 10 seconds (by default) indicating as such, describing the
current discovery state and the current quorum(s).
* Add note about whether the discovered nodes form a quorum or not
* Introduce separate ClusterFormationFailureHelper
... and back out the unnecessary changes elsewhere
* It can be volatile
In #34474, we added a new assertion to ensure that the
LocalCheckpointTracker is always consistent with Lucene index. However,
we reset LocalCheckpoinTracker in testDedupByPrimaryTerm cause this
assertion to be violated.
This commit removes resetCheckpoint from LocalCheckpointTracker and
rewrites testDedupByPrimaryTerm without resetting the local checkpoint.
Relates #34474
This test tries to compare the CB stats from an InternalEngine
and a FrozenEngine but is subject to segement merges that might finish
and get committed after we read the breaker stats. This can cause
occational test failures.
Closes#36207
Add support for inlined user dictionary in Nori
This change adds a new option called `user_dictionary_rules` to the
Nori a tokenizer`. It can be used to set additional tokenization rules
to the Korean tokenizer directly in the settings (instead of using a file).
Closes#35842
In real deployments it is important that clusters are properly configured to
avoid accidentally forming multiple independent clusters at cluster
bootstrapping time. However we also expect to be able to unpack Elasticsearch
and start up one or more nodes without any up-front configuration, and have
them do their best to find each other and form a cluster after a few seconds.
This change adds a delayed automatic bootstrapping process to nodes that start
up with no relevant settings set to support the desired out-of-the-box
experience without compromising safety in properly-configured deployments.
The results iterator is consuming and closing the results stream
once it is done. It seems this should not be the responsibility
of the results iterator. It stops the iterator from being reusable
for different processes where closing the stream is not desirable.
This commit is moving the consuming and closing of the results stream
into the autodetect result processor.
The conversion of timezones in JodaCompatibleZonedDateTime from joda to
java time requires the use of the DateUtils class to cater for corner
cases.
Closes#36306
The dot is used as a splitting character internally for looking up
values in the array compare condition, thus the user should use the
script condition in such cases.
Includes:
LUCENE-8594: DV update are broken for updates on new field
LUCENE-8590: Optimize DocValues update datastructures
LUCENE-8593: Specialize single value numeric DV updates
Relates #36286
This is related to #27260. In Elasticsearch all of the messages that we
serialize to write to the network are composed of heap bytes. When you
read or write to a nio socket in java, the heap memory you passed down
must be copied to/from direct memory. The JVM internally does some
buffering of the direct memory, however it is essentially unbounded.
This commit introduces a simple mechanism of buffering and copying the
memory in transport-nio. Each network event loop is given a 64kb
DirectByteBuffer. When we go to read we use this buffer and copy the
data after the read. Additionally, when we go to write, we copy the data
to the direct memory before calling write. 64KB is chosen as this is the
default receive buffer size we use for transport-netty4
(NETTY_RECEIVE_PREDICTOR_SIZE).
Since we only have one buffer per thread, we could afford larger.
However, if we the buffer is large and not all of the data is flushed in
a write call, we will do excess copies. This is something we can
explore in the future.
The test testLookupSeqNoByIdInLucene fails because it expects if any
change should be visible after a flush. However, that flush might be
ignored if the waitIfOngoing parameter is false (the default value), and
there is an ongoing flush triggered after merge is running.
Closes#35823
This commit moves back to use explicit dependsOn for test tasks on
check. Not all tasks extending RandomizedTestingTask should be run by
check directly.
Martijn van Groningen
Jacques B
Nhat Nguyen
Yogesh Gaikwad
Tim Brooks
Michael Basnight
David Turner
Ryan Ernst
Julie Tibshirani
Gordon Brown
Simon Willnauer
David Roberts
Wilder Pereira
Dimitris Athanasiou
Nik Everett
Alpar Torok
Jack Conradson
Jim Ferenczi
Christoph Büscher
Adrien Grand
Alexander Reelsen
Tanguy Leroux
Armin Braun
Jason Tedor