This commit fixes the handling of spaces in Windows paths. The current
mechanism works fine in a path that contains a single space, but fails
on a path that contains multiple spaces. With this commit, that is no
longer the case.
Relates #21921
Elasticsearch can be run in a few different ways:
- from the command line on Linux and Windows
- as a service on Linux and Windows
on both 32-bit client and 64-bit server VMs. We strive for a great
out-of-the-box experience any of these combinations but today it is
lacking on 32-bit client JVMs and on the Windows service. There are two
deficiencies that arise:
- on any 32-bit client JVM we fail to start out of the box because we
force the server JVM in jvm.options
- when installing the Windows service, the thread stack size must be
specified in jvm.options
This commit attempts to address these deficiencies.
We should continue to force the server JVM because there are systems
where the server JVM is not active by default (e.g., the 32-bit JDK on
Windows). This does mean that if a user tries to run with a client JVM
they will see a failure message at startup but this is the best that we
can do if we want to continue to force the server JVM. Thus, this commit
at least documents this situation.
To improve the situation with installing the Windows service, this
commit adds a default setting for the thread stack size. This default is
chosen based on the default thread stack size across all 64-bit server
JVMs. This means that if a user tries to run with a 32-bit JVM they
could otherwise see significantly higher memory usage (this situation is
complicated, it's really only on Windows where the extra memory usage is
egregious, but cutting into the 32-bit address space on any system is
bad). So this commit makes it so that the out-of-the-box experience is
improved for the Windows service on 64-bit server JVMs and we document
the need to adjust this setting on 32-bit JVMs.
Again, we are focusing on the out-of-the-box experience here and this
means optimizing for the best experience on any 64-bit server JVM as
this covers the vast majority of the user base. The users that are on
32-bit JVMs will suffer a little bit but at least now any user on any
64-bit server JVM can start Elasticsearch out of the box.
Finally, we fix some references to the jvm.options documentation.
Relates #21920
During package install on systemd-based systems, we try to set
vm.max_map_count. On some systems (e.g., containers), users do not have
the ability to tune these parameters from within the container. This
commit provides an option for these users to skip setting such kernel
parameters.
Relates #21899
Our default pattern layout truncates log messages. This is to avoid
blowing disk space from excessively log messages, which can happen if a
message contains a mapping or an large query. Yet, we trunacte from the
beginning which is probably where the most germane information is. This
commit modifies the default pattern layout to trunacte from the end.
Relates #21609
Adds a version constant for it, bwc indices, and a vagrant upgrade-from
version. Also bumps the "upgrade from" version for the backwards-5.0
test and adds `skip`s for tests that don't fail against 5.0 so we skip
them during the backwards testing.
Finally, this skips the "Shrink index via API" test because it fails
consistently for me. Inconsistently for CI, but consistently for me.
I'll work on making it consistent tomorrow.
On some systems these utilities are in /usr/lib/systemd/systemd-sysctl
and /usr/sbin/sysctl, and on others the /usr is dropped. This commit
accounts for that fact.
Our docs claim that we set vm.max_map_count automatically. This is not
quite the case. The story is that on SysV init we set vm.max_map_count
each time the service starts, which is good. On systemd, we create a
sysctl.d conf file that sets vm.map_max_count, but this is only
meaningful if the system is rebooted after package install. This commit
modifies the post-install script so that we run systemd-sysctl so that
the vm.max_map_count change occurs after package install without a
reboot.
Relates #21507
Given that the default is now 1, the comment in the config file was outdated. Also considering that the default value is production ready, we shouldn't list it among the values that need attention when going to production.
Relates to #19964
The environment variable ES_JVM_OPTIONS allows end-users to specify a
custom location for the jvm.options file. Unfortunately, this
environment variable is not exported from the SysV init scripts. This
commit addresses this issue, and includes a test that ES_JVM_OPTIONS and
ES_JAVA_OPTS work for the SysV init packages.
Relates #21445
All plugins currently have their own licenses dir for the
dependencyLicenses task, but core disables this and has the check inside
distribution. This may have been better for maven, but for
gradle it makes more sense to just use the dependencyLicenses task that
automatically exists inside :core, and remove the hacked up version that
is inside distribution.
At one point in the past when moving out the rest tests from core to
their own subproject, we had multiple test classes which evenly split up
the tests to run. However, we simplified this and went back to a single
test runner to have better reproduceability in tests. This change
removes the remnants of that multiplexing support.
On ubuntu 14.04, which uses upstart, where as our debian package uses
sysvinit, there is no stdout/stderr message printed when starting up,
because the start-stop-daemon swallows it.
As Elasticsearch is started to daemonize, we can remove the background
flag from the start-stop-daemon and thus see, if the system does not have
enough memory for starting up - something that happens often on VMs, since
Elasticsearch 5.0 uses 2gb by default instead of one.
Relates #21300
Relates #12716
Today when running gradle clean
:distribution:(integ-test-zip|tar|zip):assemble, the created archive
distribution will be missing the empty plugins directory. This is
because the empty plugins folder created in the build folder for the
copy spec task is created during configuration and then is later wiped
away by the clean task. This commit addresses this issue, by pushing
creation of the directory out of the configuration phase.
Relates #21271
Today when installing Elasticsearch from an archive distribution (tar.gz
or zip), an empty plugins folder is not included. This means that if you
install Elasticsearch and immediately run elasticsearch-plugin list, you
will receive an error message about the plugins directory missing. While
the plugins directory would be created when starting Elasticsearch for
the first time, it would be better to just include an empty plugins
directory in the archive distributions. This commit makes this the
case. Note that the package distributions already include an empty
plugins folder.
Relates #21204
When installing the Windows service, certain settings like the minimum
heap, maximum heap and thread stack size setting must be set. While
there is an error message making mention of this fact, the error message
is not explicit exactly what setting needs to be set. This commit makes
these settings explicit.
Relates #21200
Lucene 6.3 is expected to be released in the next weeks so it'd be good to give
it some integration testing. I had to upgrade randomized-testing too so that
both Lucene and Elasticsearch are on the same version.
This commit fixes responses to HEAD requests so that the value of the
Content-Length is correct per the HTTP spec. Namely, the value of this
header should be equal to the Content-Length if the request were not a
HEAD request.
This commit also fixes a memory leak on HEAD requests to the main action
that arose from the bytes on a builder not being released due to them
being dropped on the floor to ensure that the response to the main
action did not have a body.
Relates #21123
Before this commit `curl -XHEAD localhost:9200?pretty` would return
`Content-Length: 1` and a body which is fairly upsetting to standards
compliant tools. Now it'll return `Content-Length: 0` with an empty
body like every other `HEAD` request.
Relates to #21075
This commit upgrades the Log4j 2 dependency to version 2.7 and removes
some hacks that we had in place to work around bugs in Log4j 2 version
2.6.2.
Relates #20805
We have a "HUGE HACK" that allows us to publish zip artifacts to
Sonatype's OSS repository without javadoc and source jars. We don't
include those jars because the zip is just a repackaging of the
core and module jars for which we already publish the javadoc and
source jars. So we have a hack to publish the zip artifact when the
pom says the project is of type 'pom'.
I'm not sure why we need this pom instead of the pom generated by
nebula, but if we are going to have it then we need to populate it
with appropriate stuff like project name, description, and url.
* Build: Remove old maven deploy support
This change removes the old maven deploy that we have in parallel to
maven-publish, and makes maven-publish fully work with publishing to
maven local. Using `gradle publishToMavenLocal` should be used to
publish to .m2.
Note that there is an unfortunate hack that means for
zip artifacts we must first create/publish a dummy pom file, and then
follow that with the real pom file. It would be nice to have the pom
file contains packaging=zip, but maven central then requires sources and
javadocs. But our zips are really just attached artifacts, so we already
set the packaging type to pom for our zip files. This change just works
around a limitation of the underlying maven publishing library which
silently skips attached artifacts when the packaging type is set to pom.
relates #20164closes#20375
* Remove unnecessary extra spacing
Currently we always pass -E to the the plugin cli with the conf dir, but
this causes a very confusing error message when not giving a specific
command to the plugin cli. This change makes path.conf pass just like
path.home. These are special settings, so passing via sysprops is the
right thing to do (it is all about how we pass between shell and java
cli).
closes#18689
When uninstalling or upgrading elasticsearch using the RPM package some empty directories remain on the filesystem:
/usr/share/elasticsearch/bin
/usr/share/elasticsearch/lib
/usr/share/elasticsearch/modules
/usr/share/elasticsearch/modules/foo
Having empty directories in modules can prevent elasticsearch to start after an upgrade: the plugins service expects to find a plugin-descriptor.properties file in every sub directory of modules.
This PR cleans things a bit so that these empty directories are removed on upgrade/removal like it was in 2.x.
When upgrading elasticsearch using the RPM package, the scripts directory is removed if it's empty but it won't be recreated by the upgraded package. But after that the service won't start because the scripts dir is missing.
This commit modifies the logger names within Elasticsearch to be the
fully-qualified class name as opposed removing the org.elasticsearch
prefix and dropping the class name. This change separates the root
logger from the Elasticsearch loggers (they were equated from the
removal of the org.elasticsearch prefix) and enables log levels to be
set at the class level (instead of the package level).
Relates #20457
Today we add a prefix when logging within Elasticsearch. This prefix
contains the node name, and index and shard-level components if
appropriate.
Due to some implementation details with Log4j 2 , this does not work for
integration tests; instead what we see is the node name for the last
node to startup. The implementation detail here is that Log4j 2 there is
only one logger for a name, message factory pair, and the key derived
from the message factory is the class name of the message factory. So,
when the last node starts up and starts setting prefixes on its message
factories, it will impact the loggers for the other nodes.
Additionally, the prefixes are lost when logging an exception. This is
due to another implementation detail in Log4j 2. Namely, since we log
exceptions using a parameterized message, Log4j 2 decides that that
means that we do not want to use the message factory that we have
provided (the prefix message factory) and so logs the exception without
the prefix.
This commit fixes both of these issues.
Relates #20429
This commit adds a -q/--quiet option to Elasticsearch so that it does not log anything in the console and closes stdout & stderr streams. This is useful for SystemD to avoid duplicate logs in both journalctl and /var/log/elasticsearch/elasticsearch.log while still allows the JVM to print error messages in stdout/stderr if needed.
closes#17220
The Elasticsearch startup scripts contain checks for the presence of
support for environment variables that were removed in the 5.x
series. These checks warn the user and fail the script if any of the
unsupported environment variables are present. This was provided as
migration step from 2.x to 5.x so that we were not just silently
ignoring environment variables that were previously set. This commit
removes these checks, as upgrades from 2.x to 6.x are not supported.
Relates #20404
Previous versions of Elasticsearch permitted unquoted JSON field names even though this is against the JSON spec. This leniency was disabled by default in the 5.x series of Elasticsearch but a backwards compatibility layer was added via a system property with the intention of removing this layer in 6.0.0. This commit removes this backwards compatibility layer.
Relates #20388
-D parameters used to be allowed when starting elasticsearch scripts.
However, this was removed in #18207, but the elasticsearch-plugin.bat script
was forgotten. This change removes the -D handling.
Jython shades `jansi` into it's classpath without changing it's package or
anything like that. This causes attempts to load native code on windows which
blows up tests. This change adds `log4j.skipJansi=true` system property to our
tests as well as to the JVM properties we set.
This commit configures the deprecation logs to be size-limited to 1 GB,
and compress these logs when they roll. The default configuration will
preserve up to four rolled logs.
Relates #20287
The integ-test-zip distribution did not specify a value for
path.conf. As such, it picked up the default value of
/etc/elasticsearch. This means that on machines that have this
directory, integration tests could fail because they would try to pick
up configuration from that directory rather than from the home directory
of the exploded distribution. This commit fixes this issue by specifying
a value of path.conf for the integ-test-zip distribution.
Relates #20271
* master:
Increase visibility of deprecation logger
Skip transport client plugin installed on JDK 9
Explicitly disable Netty key set replacement
percolator: Fail indexing percolator queries containing either a has_child or has_parent query.
Make it possible for Ingest Processors to access AnalysisRegistry
Allow RestClient to send array-based headers
Silence rest util tests until the bogusness can be simplified
Remove unknown HttpContext-based test as it fails unpredictably on different JVMs
Tests: Improve rest suite names and generated test names for docs tests
Add support for a RestClient base path
The deprecation logger is an important way to make visible features of
Elasticsearch that are deprecated. Yet, the default logging makes the
log messages for the deprecation logger invisible. We want these log
messages to be visible, so the default logging for the deprecation
logger should enable these log messages. This commit changes the log
level of deprecation log message to warn, and configures the deprecation
logger so that these log messages are visible out of the box.
Relates #20254
Netty replaces the backing set for the selector implementation. The
value of doing this is questionable, and doing this requires permissions
that we are not going to grant. This commit explicitly disables this
optimization rather than relying on it failing due to lack of
permissions.
Relates #20249
the setting in elasticsearch.yml, so that when a user uncomments
out a setting by just removing the #, the setting actually
takes effect. Before, it was very easy to uncomment out a
setting by just removing the #, leaving a single whitespace
character before the setting name, which would cause the
setting to not get picked up by Elasticsearch.
Closes#20090
This commit sets the default min heap equal to the default max
heap. This is to align the default out-of-box settings with the heap
size bootstrap check.
This commit fixes the handling of spaces in the path to the jvm.options
file on Windows. The issue is that the extraneous set of quotes were
included as part of the value of ES_JVM_OPTIONS thus confusing further
downstream commands.
Relates #19951
This commit updates Jackson to the 2.8.1 version, which is more strict when it comes to build objects. It also adds the snakeyaml dependency that was previously shaded in jackson libs.
It also closes#18076
With the security permissions that we grant to Netty, Netty can not
access unsafe (because it relies on having the runtime permission
accessDeclaredMembers and the reflect permission
suppressAccessChecks). Instead, we should just explicitly tell Netty to
not use unsafe. This commit adds a flag to the default jvm.options to
tell Netty to not look for unsafe.
Relates #19786
This makes it obvious that these tests are for running the client yaml
suites. Now that there are other ways of running tests using the REST
client against a running cluster we can't go on calling the shared
client yaml tests "REST tests". They are rest tests, but they aren't
**the** rest tests.
This adds the `bin/elasticsearch-translate` bin file that will be used
for CLI tasks pertaining to Elasticsearch. Currently it implements only
a single sub-command, `truncate-translog`, that creates a truncated
translog for a given folder.
Here's what running the tool looks like:
```
λ bin/elasticsearch-translog truncate -d data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/
Checking existing translog files
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
! WARNING: Elasticsearch MUST be stopped before running this tool !
! !
! WARNING: Documents inside of translog files will be lost !
! !
! WARNING: The following files will be DELETED! !
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-10.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-18.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-21.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-12.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-25.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-29.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-2.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-5.tlog
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-41.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-6.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-37.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-24.ckp
--> data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-11.ckp
Continue and DELETE files? [y/N] y
Reading translog UUID information from Lucene commit from shard at [data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/index]
Translog Generation: 3
Translog UUID : AxqC4rocTC6e0fwsljAh-Q
Removing existing translog files
Creating new empty checkpoint at [data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog.ckp]
Creating new empty translog at [data/nodes/0/indices/P45vf_YQRhqjfwLMUvSqDw/0/translog/translog-3.tlog]
Done.
```
It also includes a `-b` batch operation that can be used to skip the
confirmation diaglog.
Resolves#19123
This adds a header that looks like `Location: /test/test/1` to the
response for the index/create/update API. The requirement for the header
comes from https://www.w3.org/Protocols/rfc2616/rfc2616-sec10.htmlhttps://tools.ietf.org/html/rfc7231#section-7.1.2 claims that relative
URIs are OK. So we use an absolute path which should resolve to the
appropriate location.
Closes#19079
This makes large changes to our rest test infrastructure, allowing us
to write junit tests that test a running cluster via the rest client.
It does this by splitting ESRestTestCase into two classes:
* ESRestTestCase is the superclass of all tests that use the rest client
to interact with a running cluster.
* ESClientYamlSuiteTestCase is the superclass of all tests that use the
rest client to run the yaml tests. These tests are shared across all
official clients, thus the `ClientYamlSuite` part of the name.
Some tests still start http implicitly or miss configuring the transport clients correctly.
This commit fixes all remaining tests and adds a depdenceny to `transport-netty` from
`qa/smoke-test-http` and `modules/reindex` since they need an http server running on the nodes.
This also moves all required permissions for netty into it's module and out of core.
Today in the packaging removal scripts, we disable the service in
post-uninstall. Yet, this happens after service files have been
erased. On some systems, this can cause the service disable to fail
leaving behind state causing the service to be enabled on subsequent
installs. This commit moves the service disabling to the pre-uninstall
script to prevent this issue.
Relates #19328
Today when a thread encounters a fatal unrecoverable error that
threatens the stability of the JVM, Elasticsearch marches on. This
includes out of memory errors, stack overflow errors and other errors
that leave the JVM in a questionable state. Instead, the Elasticsearch
JVM should die when these errors are encountered. This commit causes
this to be the case.
Relates #19272
This commit updates the SHA for the JNA dependency. The JNA dependency
was upgraded from version 4.1.0 to version 4.2.2 in commit
7f10174362 but the SHA was not updated.
Unless explicitly disabled, the parallel new collector is enabled
automatically as soon as the CMS collector is enabled:
void Arguments::set_cms_and_parnew_gc_flags() {
assert(
!UseSerialGC && !UseParallelOldGC && !UseParallelGC,
"Error");
assert(UseConcMarkSweepGC, "CMS is expected to be on here");
// If we are using CMS, we prefer to UseParNewGC,
// unless explicitly forbidden.
if (FLAG_IS_DEFAULT(UseParNewGC)) {
FLAG_SET_ERGO(bool, UseParNewGC, true);
}
While it's fine to be explicit, the UseParNewGC flag is deprecatd in JDK
8 and produces warning messages in JDK 9:
Java HotSpot(TM) 64-Bit Server VM warning: Option UseParNewGC was
deprecated in version 9.0 and will likely be removed in a future
release.
Thus, we can and should just remove this flag from the default JVM
options.
Relates #18767
The setting bootstrap.mlockall is useful on both POSIX-like systems
(POSIX mlockall) and Windows (Win32 VirtualLock). But mlockall is really
a POSIX only thing so the name should not be tied POSIX. This commit
renames the setting to "bootstrap.memory_lock".
Relates #18669
Recent changes adds an extra bin/ directory that contains Windows bat files in the normal Bin folder of elasticsearch. For exemple the script elasticsearch.bat is located in bin/bin/elasticsearch.bat instead of bin/elasticsearch.bat.
The distributions had their own copies of these extra files, which was a
carry over from maven. This change removes the duplicate files and
copies them from the root of the project.
closes#18597
This change tweaks the metadata version associated with the deb and rpm
packages. For rpm, dashes are allowed in versions, so we can use the
version as it already exists. For rpm, dashes are not allowed, so this
uses underscores instead. This only affects prerelease versions (eg
alpha/beta/rc), and usually someone doesn't specify the version, so the
inconsistency doesn't matter that much.
The default jvm.options file ships with the -server flag to force the
server VM on systems where the server VM is not the default. However,
the method of starting the JVM via the Windows service does not support
the command-line flags for selecting the VM because it starts from a
DLL that is specific to the server or client VM. Thus, we need to
filter these options from the jvm.options configuration file when
installing the Windows service.
Relates #18473
Today when parsing settings during bootstrap, we add a system property
for every Elasticsearch setting. Additionally, settings can be set via
system properties. This commit simplifies this situation.
- settings are no longer propogated to system properties
- system properties can not be used to set settings
- the "es." prefix on settings is no longer required (nor permitted)
- test logging has a dedicated system property (tests.logger.level)
Relates #18198
This change makes `gradle run` use the full zip distribution. Arguably
we could make it do the same when run inside plugins, but I started out
with this simple change. I am open to moving it into the RunTask itself
so that plugins will do this as well.
After considerable discussion, we have elected to set the default min
heap to 256m and the default max heap to 2g. This is to balance the
desire for a good out-of-the-box performance experience (default max
heap of 2g) with a good out-of-the-box experience running on machines
with limited resources or running multiple instances on a single modern
developer laptop (default min heap of 1g).
Benchmarking with the geonames data set shows that Elasticsearch truly
needs 2g of heap or the heap is a bottleneck for indexing rates. If our
goal is to satisfy the out-of-the-box-experience, we should prioritize
the out-of-the-box performance experience. Thus, the default heap should
be 2g until smaller heaps are not the bottleneck for indexing small data
sets.
This commit fixes the Debian package requires clause for bash. For the
RPM it is okay to specify the binary, but for the Debian package the
package name must be specified.
Today we encourage users to set their minimum and maximum heap settings
equal to each other to prevent the heap from resizing. Yet, the default
heap settings do not start Elasticsearch in this fashion. This commit
addresses this discrepancy by setting the default min heap to '512m' and
the default max heap to the default min heap.
Relates #16334
This commit adds a hard requirement to the RPM and Debian packages for
/bin/bash to be present, and adds a note regarding this to the migration
docs.
Relates #18259
In the plugin script we set the setting default.path.conf to control the
path to the configuration file. But the default directory might not
exist in which case we can run into exceptions. This commit restores a
guard against this directory not existing.
This commit switches the command-line scripts to use bash instead of sh
so that we can take advantage of features that bash provides like
arrays.
Relates #18251
In 7d1fd17172 the parsing of command-line
properties in the plugin script was removed. That commit missed
additional parsing of the properties for es.default.path.conf. This
commit removes that parsing and also replaces the use of eval with exec.
Relates #18239
The plugin script parses command-line options looking for Java system
properties and extracts these arguments to pass to the java command when
starting the JVM. Since elasticsearch-plugin allows arbitrary user
arguments to the JVM via ES_JAVA_OPTS, this parsing is unnecessary. This
commit removes this unnecessary
Relates #18207
In preparation for a unified release process, we need to be able to
generate the pom files independently of trying to actually publish. This
change adds back the maven-publish plugin just for that purpose. The
nexus plugin still exists for now, so that we do not break snapshots,
but that can be removed at a later time once snapshots are happenign
through the unified tools. Note I also changed the dir jars are written
into so that all our artifacts are under build/distributions.
Today we softly warn about running with the client VM. However, we
should really refuse to start in production mode if running with the
client VM as the performance of the client VM is too devastating for a
server application. This commit adds an option to jvm.options to ensure
that we are starting with the server VM (on all 32-bit non-Windows
platforms on server-class machines (2+ CPUs, 2+ GB physical RAM) this is
the default and on all 64-bit platforms this is the only option) and
adds a bootstrap check for the client VM.
Relates #18155
Today we specify the client option for the JVM when executing plugin
commands. Yet, this option does nothing on a 64-bit capable JDK as such
JDKs always select the Hotspot server VM. And for 32-bit JDKs, running
plugin commands with the server VM is okay. Thus, we should just remove
this unnecessary flag and just let the default VM be selected.
Relates #18142
The RPM init script did not include the check for `bin/elasticsearch` being
executable. This fix adds this checks and makes the tests pass.
This fixes the init script, so the tests pass on centos-6 again.
Today when restarting Elasticsearch using the start-stop-daemon on
Debian-based systems using System V init, we sleep for one second
between the process successfully stopping and starting the process
again. This sleep is unnecessary as the stop function retries forever
until the previous instance successfully terminates. This commit removes
that unncessary sleep.
Relates #17966
Exit with proper exit code (1) and an error message if elasticsearch
executable binary does not exists or has insufficient permissions to
execute.
Squashed commit of the following:
commit 9768d316303418ba4f9c96d3f87c376048a1b1bc
Author: Puru <tuladharpuru@gmail.com>
Date: Fri Apr 22 23:26:47 2016 +0545
Fixed ES_HOME typo
commit 79a2b0394297f8b02b6f71b71ba35ff79f1a684e
Author: Puru <tuladharpuru@gmail.com>
Date: Sun Apr 10 11:00:24 2016 +0545
Improve elasticsearch startup script test
Added improvement as per conversation in https://github.com/elastic/elasticsearch/pull/17082#issuecomment-206459613
commit 7be38e1fefd4baa6ccdbdc14745c00f6dc052e0c
Author: Puru <tuladharpuru@gmail.com>
Date: Wed Mar 23 13:23:52 2016 +0545
Add elasticsearch startup script test
The test ensures that elasticsearch startup script exists and is executable.
commit d10eed5c08260fa9c158a4487bbb3103a8d867ed
Author: Puru <tuladharpuru@gmail.com>
Date: Wed Mar 23 12:30:25 2016 +0545
Fixed IF syntax and failure message
commit 6dc66f616545572485b4d43bee05a4cbbf1bed72
Author: Puru <tuladharpuru@gmail.com>
Date: Sat Mar 12 11:08:11 2016 +0545
Fix exit code
Exit with proper exit code (1) and an error message if elasticsearch executable binary does not exists or has insufficient permissions to execute.
This changes our packaging to be explicit about the permissions of files
and directories in the tar.gz, rpm, and deb packages. This is to protect
against a user having an incorrectly set umask when installing.
Additionally, plugins that are installed now have their permissions set
by the plugin installation so that plugins that may have been packaged
with incorrect permissions are secured.
Resolves#17634
In Elasticsearch 5.0.0, by default unquoted field names in JSON will be
rejected. This can cause issues, however, for documents that were
already indexed with unquoted field names. To alleviate this, a system
property has been added that can be enabled so migration can occur.
This system property will be removed in Elasticsearch 6.0.0
Resolves#17674
This allows for a local file based deploy without needed nexus
auth information.
Also signing of packages has been added, either via gradle.properties
or using system properties as a fallback.
The property build.repository allows to configure another endpoint if no
snapshot build is done.
Fix creation of .asc file for tar.gz distribution
Closes#17405
This commit simplifies the default JVM options that ship with
Elasticsearch. In particular, expert settings that were previously
configurable via environment variables have been removed from the
default configuration file. Further, the heap size settings have been
moved to the top of the file with a clearer message that is in
concordance with their importance.
Closes#17714
This commit sets the bad_env_var to a default value of 0 so that in case
no bad environment variables are encountered the variable is still
defined and does not later cause a parse error in the execution of these
batch files.
Relates #17675
JAVA_OPTS is not a built-in mechanism for passing options to the JVM but
many people think that it is. We do not respect JAVA_OPTS, but this
commit adds a warning if it is set in case the end-user thinks that it
will affect Elasticsearch.
This commit renames the function that parses JVM options in
bin/elasticsearch from jvm_options to parse_jvm_options. The reason for
the rename is because a for-loop variable was shadowing the name of this
function and changing the function name further clarifies the purpose of
the function.
This commit fixes the placement of a comment in bin/elasticsearch. The
comment was made out of place by the addition of a function definition
but order is restored.
This commit adds a new configuration file jvm.options to centralize and
simplify management of JVM options. This separates the configuration of
the JVM from the packaging scripts (bin/elasticsearch*, bin/service.bat,
and init.d/elasticsearch) simplifying end-user operational management of
custom JVM options.
* upgrades numerics to new Point format
* updates geo api changes
* adds GeoPointDistanceRangeQuery as XGeoPointDistanceRangeQuery
* cuts over to ES GeoHashUtils
This commit quotes the variable that contains the path to the java
binary. Without these quotes, when the arguments to eval are evaluated
the existing quotes will be removed leading to unquoted use of the path
to the java binary. If this path contains spaces, evaluation will fail.
This commit ensures that the data, logs, and config directories have the
proper ownership after the packages are installed. Additionally, this
commit ensures that the configs in /etc/elasticsearch are preserved
after removal of the RPM package.
Change version, required a minor fix in the RPM building.
In case of a alpha/beta version, the release will contain alpha/beta
as the RPM version cannot contains dashes/tildes.
The build currently uses the old maven support in gradle. This commit
switches to use the newer maven-publish plugin. This will allow future
changes, for example, easily publishing to artifactory.
An additional part of this change makes publishing of build-tools part
of the normal publishing, instead of requiring a separate upload step
from within buildSrc. That also sets us up for a follow up to enable
precomit checks on the buildSrc code itself.
This commit fixes the pidfile setting on systems that used systemd. The
issue is that the pidfile can only be set via the command line arguments
-p or --pidfile, and is no longer settable via a setting.
Today, certain bootstrap properties are set and read via system
properties. This action-at-distance way of managing these properties is
rather confusing, and completely unnecessary. But another problem exists
with setting these as system properties. Namely, these system properties
are interpreted as Elasticsearch settings, not all of which are
registered. This leads to Elasticsearch failing to startup if any of
these special properties are set. Instead, these properties should be
kept as local as possible, and passed around as method parameters where
needed. This eliminates the action-at-distance way of handling these
properties, and eliminates the need to register these non-setting
properties. This commit does exactly that.
Additionally, today we use the "-D" command line flag to set the
properties, but this is confusing because "-D" is a special flag to the
JVM for setting system properties. This creates confusion because some
"-D" properties should be passed via arguments to the JVM (so via
ES_JAVA_OPTS), and some should be passed as arguments to
Elasticsearch. This commit changes the "-D" flag for Elasticsearch
settings to "-E".
Jason Tedor
Nik Everett
Yannick Welsch
Luca Cavanna
Ryan Ernst
Alexander Reelsen
Adrien Grand
Tanguy Leroux
gfyoung
Simon Willnauer
Mike McCandless
Ali Beyad
Clinton Gormley
Lee Hinman
Simon Willnauer
Stefan Scherer
Radovan Ondas
Danilo Vaz
Daniil Penkin
Lee Hinman
Joe Hillenbrand
Mpdreamz