* We don't have to calculate the start and end times form the shards for the status API, we have the start time available from the CS or the `SnapshotInfo` in the repo and can either take the end time form the `SnapshotInfo` or
take the most recent time from the shard stats for in progress snapshots
* Closes#43074
Fixes a bug in the PKI authentication. This manifests when there
are multiple PKI realms configured in the chain, with different
principal parse patterns. There are a few configuration scenarios
where one PKI realm might parse the principal from the Subject
DN (according to the `username_pattern` realm setting) but
another one might do the truststore validation (according to
the truststore.* realm settings).
This is caused by the two passes through the realm chain, first to
build the authentication token and secondly to authenticate it, and
that the X509AuthenticationToken sets the principal during
construction.
* Fix port range allocation with large worker IDs
Relates to #43983
The IDs gradle uses are incremented for the lifetime of the daemon which
can result in port ranges that are outside the valid range.
This change implements a modulo based formula to wrap the port ranges
when the IDs get too large.
Adresses #44134 but #44157 is also required to be able to close it.
* Remove Redundant Setting of OP_WRITE Interest
* We shouldn't have to set OP_WRITE interest before running into a partial write. Since setting OP_WRITE is handled by the `eventHandler.postHandling` logic, I think we can simply remove this operation and simplify/remove tests that were testing the setting of the write interest
Due to recent changes are done for converting `repository-hdfs` to test
clusters (#41252), the `integTestSecure*` tasks did not depend on
`secureHdfsFixture` which when running would fail as the fixture
would not be available. This commit adds the dependency of the fixture
to the task.
The `secureHdfsFixture` is a `AntFixture` which is spawned a process.
Internally it waits for 30 seconds for the resources to be made available.
For my local machine, it took almost 45 seconds to be available so I have
added the wait time as an input to the `AntFixture` defaults to 30 seconds
and set it to 60 seconds in case of secure hdfs fixture.
The integ test for secure hdfs was disabled for a long time and so
the changes done in #42090 to fix the tests are also done in this commit.
For this test, we randomize the CLUSTER_MAX_CLAUSE_COUNT on test setup
(@BeforeClass) between 50 and 100. Some queries in the test generate 56 clauses
which hasn't been an issue before LUCENE-8811, but we slightly need to increase
the minimal possible clause count now.
Closes#44192
This will help in investigations where the real memory circuit breaker is tripped to better understand
on what the actual memory is used, i.e. whether it's a temporary thing (e.g. requests) in contrast to
more permanently allocated memory (e.g. accounting).
* Cleans up all root level temp., snap-%s.dat, meta-%s.dat blobs that aren't referenced by any snapshot to deal with dangling blobs left behind by delete and snapshot finalization failures
* The scenario that get's us here is a snapshot failing before it was finalized or a delete failing right after it wrote the updated index-(N+1) that doesn't reference a snapshot anymore but then fails to remove that snapshot
* Not deleting other dangling blobs since that don't follow the snap-, meta- or tempfile naming schemes to not accidentally delete blobs not created by the snapshot logic
* Follow up to #42189
* Same safety logic, get list of all blobs before writing index-N blobs, delete things after index-N blobs was written
* Fix ShrinkIndexIT
* Move this test suit to cluster scope. Currently, `testShrinkThenSplitWithFailedNode` stops a random node which randomly turns out to be the only shared master node so the cluster reset fails on account of the fact that no shared master node survived.
* Closes#44164
In some cases we need to parse some XContent that is already parsed into
a map. This is currently happening in handling source in SQL and ingest
processors as well as parsing null_value values in geo mappings. To avoid
re-serializing and parsing the value again or writing another map-based
parser this commit adds an iterator that iterates over a map as if it was
XContent. This makes reusing existing XContent parser on maps possible.
Relates to #43554
With connection management now being non-blocking, we can make NodeConnectionsService
avoid the use of MANAGEMENT threads that are blocked during the connection attempts.
I had to fiddle a bit with the tests as testPeriodicReconnection was using both the mock Threadpool
from the DeterministicTaskQueue as well as the real ThreadPool initialized at the test class level,
which resulted in races.
* Improoce how log is tailed in testclusters on failure
- only print last few lines
- print all errors and warnings
- compact repeating errors and warnings
* Reduce Number of List Calls During Snapshot Create and Delete
Some obvious cleanups I found when investigation the API call count
metering:
* No need to get the latest generation id after loading latest
repository data
* Loading RepositoryData already requires fetching the latest
generation so we can reuse it
* Also, reuse list of all root blobs when fetching latest repo
generation during snapshot delete like we do for shard folders
* Lastly, don't try and load `index--1` (N = -1) repository data, it
doesn't exist -> just return the empty repo data initially
Simplifies AbstractSimpleTransportTestCase to use JVM-local ports and also adds an assertion so
that cases like #44134 can be more easily debugged. The likely reason for that one is that a test,
which was repeated again and again while always spawning a fresh Gradle worker (due to Gradle
daemon) kept increasing Gradle worker IDs, causing an overflow at some point.
Now that ML job configs are stored in an index rather than
cluster state, availability of the .ml-config index is very
important to the operation of ML. When a cluster starts up
the ML persistent tasks will be considered for node
assignment very early on. It is best in this case if
assignment is deferred until after the .ml-config index is
available.
The introduction of data frame analytics jobs has made this
problem worse, because anomaly detection jobs already waited
for the primary shards of the .ml-state, .ml-anomalies-shared
and .ml-meta indices to be available before doing node
assignment, and by coincidence this would probably lead to
the primary shards of .ml-config also being searchable. But
data frame analytics jobs had no other index checks prior to
this change.
This fixes problem 2 of #44156
* Improve Repository Consistency Check in Tests (#44099)
* Check that index metadata as well as snapshot metadata always exists
when referenced by other metadata
* Fix SnapshotResiliencyTests on ExtraFS (#44113)
* As a result of #44099 we're now checking more directories and have to
ignore the `extraN` folders for those like we do for indices already
* Closes#44112
* The incompatible snapshots logic was created to track 1.x snapshots that
became incompatible with 2.x
* It serves no purpose at this point
* It adds an additional GET request to every loading of
RepositoryData (from loading the incompatible snapshots blob)
By default, we don't check ranges while indexing geo_shapes. As a
result, it is possible to index geoshapes that contain contain
coordinates outside of -90 +90 and -180 +180 ranges. Such geoshapes
will currently break SQL and ML retrieval mechanism. This commit removes
these restriction from the validator is used in SQL and ML retrieval.
* Add WARN Logging if Mock Network Accepts Huge Number of Connections
* As discussed, added warn logging to rule out endless accept loops for #43387
* Had to handle it by the relatively awkward override in the mock nio
because we don't have logging in the NIO module where
(`ServerChannelContext` lives)
The base classes for transport requests and responses currently
implement Streamable and Writeable. The writeTo method on these base
classes is implemented with an empty implementation. Not only does this
complicate subclasses to think they need to call super.writeTo, but it
also can lead to not implementing writeTo when it should have been
implemented, or extendiong one of these classes when not necessary,
since there is nothing to actually implement.
This commit removes the empty writeTo from these base classes, and fixes
subclasses to not call super and in some cases implement an empty
writeTo themselves.
relates #34389
* Test fixtures improovements
Don't disable some of the precommit tasks on fixtures.
This no longer makes sense now that a project can both produce and use a
fixture.
In order for this to be possible, had to add an additional configuration
to make JarHell class accessible to the task even if it's not a
dependency of the project and fix some of the third party audit fallout
from #43671 which wasn't detected at the time due to the issue being
fixed here.
Closes#43918
Armin Braun
Albert Zaharovits
Alpar Torok
Yogesh Gaikwad
Mark Vieira
Lisa Cawley
James Rodewig
John Murphy
Mayya Sharipova
Christoph Büscher
Yannick Welsch
Benjamin Trent
Andrei Stefan
Christos Soulios
István Zoltán Szabó
Igor Motov
Nick Knize
surprisingb
David Roberts
Ryan Ernst
Ryan Ernst