Funny node names have been removed in #19456 and replaced by UUID. This commit removes these obsolete node names and replace them by real UUIDs in the documentation.
closes#20065
`gender.keyword` should be used instead of just `gender` or we
get an error `Fielddata is disabled on text fields by default. Set
fielddata=true on [gender] in order to load fielddata in memory by
uninverting the inverted index. Note that this can however use
Closes#20535
significant memory.`
`cluster.routing.allocation.cluster_concurrent_rebalance` setting,
clarifying in which shard allocation situations the rebalance limit
takes effect.
Closes#20529
During a networking partition, cluster states updates (like mapping changes or shard assignments)
are committed if a majority of the masters node received the update correctly. This means that the current master has access to enough nodes in the cluster to continue to operate correctly. When the network partition heals, the isolated nodes catch up with the current state and get the changes they couldn't receive before. However, if a second partition happens while the cluster
is still recovering from the previous one *and* the old master is put in the minority side, it may be that a new master is elected which did not yet catch up. If that happens, cluster state updates can be lost.
This commit fixed 95% of this rare problem by adding the current cluster state version to `PingResponse` and use them when deciding which master to join (and thus casting the node's vote).
Note: this doesn't fully mitigate the problem as a cluster state update which is issued concurrently with a network partition can be lost if the partition prevents the commit message (part of the two phased commit of cluster state updates) from reaching any single node in the majority side *and* the partition does allow for the master to acknowledge the change. We are working on a more comprehensive fix but that requires considerate work and is targeted at 6.0.
Currently, we check if a node has the same set of custom metadata as the master
before joining the cluster. This implies freshly installing a plugin that has its
custom metadata requires a full cluster restart.
`profile.asciidoc` now runs all of its command but it doesn't validate
all of the results. Writing the validation is time consuming so I only
did some of it.
* Update rescoring docs in respect to sort
If sort is present in a query the rescore query is not executed. As long as this feature is neither implemented (see discussion in #6788) nor the combination of sort and rescoring raises an error, we should warn the user in the documentation about this.
* Missed a dot
In 7560101ec7, the Elasticsearch logger
names were modified to be their fully-qualified class name (with some
exceptions for special loggers like the slow logs and the transport
tracer). This commit updates the docs accordingly.
Relates #20475
update geoip to not include null-valued results from database
Originally, the plugin would still insert all the requested fields, but
assign null to each one. This fixes that by not writing the fields at
all. Makes for a better experience when the null fields conflict with
the typical geo_point field mapping.
With the cut over to LatLonPoint the geohash, geohash_precision, lat_lon, and geohash_prefix parameters have been removed. This commit fixes the doc build by removing the remaining dangling references to these removed parameters.
This change replaces the fields parameter with stored_fields when it makes sense.
This is dictated by the renaming we made in #18943 for the search API.
The following list of endpoint has been changed to use `stored_fields` instead of `fields`:
* get
* mget
* explain
The documentation and the rest API spec has been updated to cope with the changes for the following APIs:
* delete_by_query
* get
* mget
* explain
The `fields` parameter has been deprecated for the following APIs (it is replaced by _source filtering):
* update: the fields are extracted from the _source directly.
* bulk: the fields parameter is used but fields are extracted from the source directly so it is allowed to have non-stored fields.
Some APIs still have the `fields` parameter for various reasons:
* cat.fielddata: the fields paramaters relates to the fielddata fields that should be printed.
* indices.clear_cache: used to indicate which fielddata fields should be cleared.
* indices.get_field_mapping: used to filter fields in the mapping.
* indices.stats: get stats on fields (stored or not stored).
* termvectors: fields are retrieved from the stored fields if possible and extracted from the _source otherwise.
* mtermvectors:
* nodes.stats: the fields parameter is used to concatenate completion_fields and fielddata_fields so it's not related to stored_fields at all.
Fixes#20155
This commit adds a -q/--quiet option to Elasticsearch so that it does not log anything in the console and closes stdout & stderr streams. This is useful for SystemD to avoid duplicate logs in both journalctl and /var/log/elasticsearch/elasticsearch.log while still allows the JVM to print error messages in stdout/stderr if needed.
closes#17220
This commit adds a health status parameter to the cat indices API for
filtering on indices that match the specified status (green|yellow|red).
Relates #20393
Add docs to template support for _msearch
Relates to #10885
Relates to #15674
* Reference those docs from the rest api spec for _msearch/template support.
In 5.x we allowed this with a deprecation warning. This removes the code
added for that deprecation, requiring the cluster name to not be in the
data path.
Resolves#20391
This was an error-prone version type that allowed overriding previous
version semantics. It could cause primaries and replicas to be out of
sync however, so it has been removed.
Resolves#19769
Previous versions of Elasticsearch permitted unquoted JSON field names even though this is against the JSON spec. This leniency was disabled by default in the 5.x series of Elasticsearch but a backwards compatibility layer was added via a system property with the intention of removing this layer in 6.0.0. This commit removes this backwards compatibility layer.
Relates #20388
This includes:
- All regular numeric types such as int, long, scaled-float, double, etc
- IP addresses
- Dates
- Geopoints and Geoshapes
Relates to #19784
The collect_payloads parameter of the span_near query was previously
deprecated with the intention to be removed. This commit removes this
parameter.
Relates #20385
This was an error-prone version type that allowed overriding previous
version semantics. It could cause primaries and replicas to be out of
sync however, so it has been removed.
Resolves#19769
Hi all,
I was trying to run the percolate examples, but I figured that because of the "type":"keyword" , the code wasn't working.
In the saerch query the "message" : "A new bonsai tree in the office" is a pure string.
I changed it to "text".
Exposing lucene 6.x minhash tokenfilter
Generate min hash tokens from an incoming stream of tokens that can
be used to estimate document similarity.
Closes#20149
** The default script language is now maintained in `Script` class.
* Added `script.legacy.default_lang` setting that controls the default language for scripts that are stored inside documents (for example percolator queries). This defaults to groovy.
** Added `QueryParseContext#getDefaultScriptLanguage()` that manages the default scripting language. Returns always `painless`, unless loading query/search request in legacy mode then the returns what is configured in `script.legacy.default_lang` setting.
** In the aggregation parsing code added `ParserContext` that also holds the default scripting language like `QueryParseContext`. Most parser don't have access to `QueryParseContext`. This is for scripts in aggregations.
* The `lang` script field is always serialized (toXContent).
Closes#20122
and be much more stingy about what we consider a console candidate.
* Add `// CONSOLE` to check-running
* Fix version in some snippets
* Mark groovy snippets as groovy
* Fix versions in plugins
* Fix language marker errors
* Fix language parsing in snippets
This adds support for snippets who's language is written like
`[source, txt]` and `["source","js",subs="attributes,callouts"]`.
This also makes language required for snippets which is nice because
then we can be sure we can grep for snippets in a particular language.
- Using log() to indicate natural log can add some confusion when trying to further adjust/tweak scores. Other parts of the API (field_value_factor on this same page) use 'ln' and 'log', so this change should be more consistent
- Fixes#20027
- I generated the images using http://latex2png.com/ at a resolution of 150 which seemed to be about the same size as before
This commit configures the deprecation logs to be size-limited to 1 GB,
and compress these logs when they roll. The default configuration will
preserve up to four rolled logs.
Relates #20287
The mem section was buggy in cluster stats and removed. It is now added back with the same structure as in node stats, containing total memory, available memory, used memory and percentages. All the values are the sum of all the nodes across the cluster (or at least the ones that we were able to get the values from).
If elasticsearch controls the ID values as well as the documents
version we can optimize the code that adds / appends the documents
to the index. Essentially we an skip the version lookup for all
documents unless the same document is delivered more than once.
On the lucene level we can simply call IndexWriter#addDocument instead
of #updateDocument but on the Engine level we need to ensure that we deoptimize
the case once we see the same document more than once.
This is done as follows:
1. Mark every request with a timestamp. This is done once on the first node that
receives a request and is fixed for this request. This can be even the
machine local time (see why later). The important part is that retry
requests will have the same value as the original one.
2. In the engine we make sure we keep the highest seen time stamp of "retry" requests.
This is updated while the retry request has its doc id lock. Call this `maxUnsafeAutoIdTimestamp`
3. When the engine runs an "optimized" request comes, it compares it's timestamp with the
current `maxUnsafeAutoIdTimestamp` (but doesn't update it). If the the request
timestamp is higher it is safe to execute it as optimized (no retry request with the same
timestamp has been run before). If not we fall back to "non-optimzed" mode and run the request as a retry one
and update the `maxUnsafeAutoIdTimestamp` unless it's been updated already to a higher value
Relates to #19813
* master:
Avoid NPE in LoggingListener
Randomly use Netty 3 plugin in some tests
Skip smoke test client on JDK 9
Revert "Don't allow XContentBuilder#writeValue(TimeValue)"
[docs] Remove coming in 2.0.0
Don't allow XContentBuilder#writeValue(TimeValue)
[doc] Remove leftover from CONSOLE conversion
Parameter improvements to Cluster Health API wait for shards (#20223)
Add 2.4.0 to packaging tests list
Docs: clarify scale is applied at origin+offest (#20242)
* Params improvements to Cluster Health API wait for shards
Previously, the cluster health API used a strictly numeric value
for `wait_for_active_shards`. However, with the introduction of
ActiveShardCount and the removal of write consistency level for
replication operations, `wait_for_active_shards` is used for
write operations to represent values for ActiveShardCount. This
commit moves the cluster health API's usage of `wait_for_active_shards`
to be consistent with its usage in the write operation APIs.
This commit also changes `wait_for_relocating_shards` from a
numeric value to a simple boolean value `wait_for_no_relocating_shards`
to set whether the cluster health operation should wait for
all relocating shards to complete relocation.
* Addresses code review comments
* Don't be lenient if `wait_for_relocating_shards` is set
* master:
Increase visibility of deprecation logger
Skip transport client plugin installed on JDK 9
Explicitly disable Netty key set replacement
percolator: Fail indexing percolator queries containing either a has_child or has_parent query.
Make it possible for Ingest Processors to access AnalysisRegistry
Allow RestClient to send array-based headers
Silence rest util tests until the bogusness can be simplified
Remove unknown HttpContext-based test as it fails unpredictably on different JVMs
Tests: Improve rest suite names and generated test names for docs tests
Add support for a RestClient base path
The deprecation logger is an important way to make visible features of
Elasticsearch that are deprecated. Yet, the default logging makes the
log messages for the deprecation logger invisible. We want these log
messages to be visible, so the default logging for the deprecation
logger should enable these log messages. This commit changes the log
level of deprecation log message to warn, and configures the deprecation
logger so that these log messages are visible out of the box.
Relates #20254
While removing an index isn't actually an alias action, if we add
an alias action that deletes an index then we can delete and index
and add an alias with the same name as the index atomically, in
the same cluster state update.
Closes#20064
This commit adds the support for exclusion filter to the response filtering (filter_path) feature. It changes the XContentBuilder APIs so that it now accepts two types of filters: inclusive and exclusive. Filters are no more String arrays but sets of String instead.
This changes Elasticsearch to automatically downgrade `text` and
`keyword` fields into appropriate `string` fields when changing the
mapping of indexes imported from 2.x. This allows users to use the
modern, documented syntax against 2.x indexes. It also makes it clear
that reindexing in order to recreate the index in 5.0 is required for
any long lived indexes. This change is useful for the times when you
can't (cluster is just starting, not stable enough for reindex) or
shouldn't (index will only live 90 days or something).
This change adds a special field named _none_ that allows to disable the retrieval of the stored fields in a search request or in a TopHitsAggregation.
To completely disable stored fields retrieval (including disabling metadata fields retrieval such as _id or _type) use _none_ like this:
````
POST _search
{
"stored_fields": "_none_"
}
````
Today we do a lot of accounting inside the engine to maintain locations
of documents inside the transaction log. This is only needed to ensure
we can return the documents source from the engine if it hasn't been refreshed.
Aside of the added complexity to be able to read from the currently writing translog,
maintainance of pointers into the translog this also caused inconsistencies like different values
of the `_ttl` field if it was read from the tlog or not. TermVectors are totally different if
the document is fetched from the tranlog since copy fields are ignored etc.
This chance will simply call `refresh` if the documents latest version is not in the index. This
streamlines the semantics of the `_get` API and allows for more optimizations inside the engine
and on the transaction log. Note: `_refresh` is only called iff the requested document is not refreshed
yet but has recently been updated or added.
#Relates to #19787
Deprecates the optimize_bbox parameter on geodistance queries. This has no longer been needed since version 2.2 because lucene geo distance queries (postings and LatLonPoint) already optimize by bounding box.
Fix field examples to make documents actually visible
This commit adds refresh calls to field examples an removes not working
`_routing` and `_field_names` script access.
Closes#20118
This includes:
- All regular numeric types such as int, long, scaled-float, double, etc
- IP addresses
- Dates
- Geopoints and Geoshapes
Relates to #19784
Previously this was possible, which was problematic when issuing a
request like `DELETE /-myindex`, which was interpretted as "delete
everything except for myindex".
Resolves#19800
Most of the examples in the pipeline aggregation docs use a small
"sales" test data set and I converted all of the examples that use
it to `// CONSOLE`. There are still a bunch of snippets in the pipeline
aggregation docs that aren't `// CONSOLE` so they aren't tested. Most
of them are "this is the most basic form of this aggregation" so they
are more immune to errors and bit rot then the examples that I converted.
I'd like to do something with them as well but I'm not sure what.
Also, the moving average docs and serial diff docs didn't get a lot of
love from this pass because they don't use the test data set or follow
the same general layout.
Relates to #18160
Currently both `PUT` and `POST` can be used to create indices. This commit
removes support for `POST index_name` so that we can use it to index documents
with auto-generated ids once types are removed.
Relates #15613
In the example there was a alias removed and then a different alias created for the same index, but I think actually swapping a index by another one for the same alias would make more sense as an example here.
We have 1074 snippets that look like they should be converted to
`// CONSOLE`. At least that is what `gradle docs:listConsoleCandidates`
says. This adds `// NOTCONSOLE` to explicitly mark snippets that
*shouldn't* be converted to `// CONSOLE`. After marking the blindingly
obvious ones this cuts the remaining snippet count to 1032.
This commit defaults the max local storage nodes to one. The motivation
for this change is that a default value greather than one is dangerous
as users sometimes end up unknowingly starting a second node and start
thinking that they have encountered data loss.
Relates #19964
Alexander Lin
Jason Tedor
Tanguy Leroux
David Pilato
Alexander Guz
Ali Beyad
Boaz Leskes
Areek Zillur
Nik Everett
Luca Cavanna
gfyoung
Clinton Gormley
Tobias Günther
Tal Levy
debadair
Nicholas Knize
Jim Ferenczi
Yevhen Bobrov
Isabel Drost-Fromm
Lee Hinman
antonisppn
Martijn van Groningen
Jun Ohtani
Greg Ichneumon Brown
Adrien Grand
nrichers
Jack Conradson
Florian Hopf
javanna
Simon Willnauer
Chris Earle
markwalkom
Munish Goyal
Nicolas Ruflin
Josh Becker
Dominik Stadler
Igor Motov
ddddn
polyfractal
Ludo
Gytis Šk