* Create S3 Third Party Test Task that Covers the S3 CLI Tool
* Adjust snapshot cli test tool tests to work with real S3
* Build adjustment
* Clean up repo path before testing
* Dedup the logic for asserting path contents by using the correct utility method here that somehow became unused
* Test fixtures improovements
Don't disable some of the precommit tasks on fixtures.
This no longer makes sense now that a project can both produce and use a
fixture.
In order for this to be possible, had to add an additional configuration
to make JarHell class accessible to the task even if it's not a
dependency of the project and fix some of the third party audit fallout
from #43671 which wasn't detected at the time due to the issue being
fixed here.
Closes#43918
* Add Ability to List Child Containers to BlobContainer (#42653)
* Add Ability to List Child Containers to BlobContainer
* This is a prerequisite of #42189
We initially added `requireDocker` for a way for tasks to say that they
absolutely must have it, like the build docker image tasks.
Projects using the test fixtures plugin are not in this both, as the
intent with these is that they will be skipped if docker and docker-compose
is not available.
Before this change we were lenient, the docker image build would succeed
but produce nothing. The implementation was also confusing as it was not
immediately obvious this was the case due to all the indirection in the
code.
The reason we have this leniency is that when we added the docker image
build, docker was a fairly new requirement for us, and we didn't have
it deployed in CI widely enough nor had CI configured to prefer workers
with docker when possible. We are in a much better position now.
The other reason was other stack teams running `./gradlew assemble`
in their respective CI and the possibility of breaking them if docker is
not installed. We have been advocating for building specific distros for
some time now and I will also send out an additional notice
The PR also removes the use of `requireDocker` from tests that actually
use test fixtures and are ok without it, and fixes a bug in test
fixtures that would cause incorrect configuration and allow some tasks
to run when docker was not available and they shouldn't have.
Closes #42680 and #42829 see also #42719
We had this as a dependency for legacy dependencies that still needed
the Log4j 1.2 API. This appears to no longer be necessary, so this
commit removes this artifact as a dependency.
To remove this dependency, we had to fix a few places where we were
accidentally relying on Log4j 1.2 instead of Log4j 2 (easy to do, since
both APIs were on the compile-time classpath).
Finally, we can remove our custom Netty logger factory. This was needed
when we were on Log4j 1.2 and handled logging in our own unique
way. When we migrated to Log4j 2 we could have dropped this
dependency. However, even then Netty would still pick up Log4j 1.2 since
it was on the classpath, thus the advantage to removing this as a
dependency now.
* Add Infrastructure to Run 3rd Party Repository Tests
* Add infrastructure to run third party repository tests using our standard JUnit infrastructure
* This is a prerequisite of #42189
* Replace usages RandomizedTestingTask with built-in Gradle Test (#40978)
This commit replaces the existing RandomizedTestingTask and supporting code with Gradle's built-in JUnit support via the Test task type. Additionally, the previous workaround to disable all tasks named "test" and create new unit testing tasks named "unitTest" has been removed such that the "test" task now runs unit tests as per the normal Gradle Java plugin conventions.
(cherry picked from commit 323f312bbc829a63056a79ebe45adced5099f6e6)
* Fix forking JVM runner
* Don't bump shadow plugin version
* Fix 3rd pary S3 tests
This is allready excluded on line 186, by doing this again here, the
other exclusion from arround that line are removed causing the tests to
fail.
* Fix blacklisting with the fixture
* Add support for setting and keystore settings
* system properties and env var config
* use testclusters for repository-s3
* Some cleanup of the build.gradle file for plugin-s3
* add runner {} to rest integ test task
This commit moves back to use explicit dependsOn for test tasks on
check. Not all tasks extending RandomizedTestingTask should be run by
check directly.
Closes#35435
- make it easier to add additional testing tasks with the proper configuration and add some where they were missing.
- mute or fix failing tests
- add a check as part of testing conventions to find classes not included in any testing task.
* Binding to `0` gives us free ports that are assigned sequentially by Linux making collisions much less likely compared to manually finding a free port in a range
* Closes#32208
With this change, we apply the common test config automatically to all
newly created tasks instead of opting in specifically.
For plugin authors using the plugin externally this means that the
configuration will be applied to their RandomizedTestingTasks as well.
The purpose of the task is to simplify setup and make it easier to
change projects that use the `test` task but actually run integration
tests to use a task called `integTest` for clarity, but also because
we may want to configure and run them differently.
E.x. using different levels of concurrency.
In cases when mixed secure S3 client credentials and insecure S3 client
credentials were used (that is, those defined on the repository), we
were overriding the credentials from the repository using insecure
settings to all the repositories. This commit fixes this by not mixing
up repositories that use insecure settings with those that use secure
settings.
The new implementation is functional equivalent with the old, ant based one.
It parses task standard error to get the missing classes and violations in the same way.
I considered re-using ForbiddenApisCliTask but Gradle makes it hard to build inheritance with tasks that have task actions , since the order of the task actions can't be controlled.
This inheritance isn't dully desired either as the third party audit task is much more opinionated and we don't want to expose some of the configuration.
We could probably extract a common base class without any task actions, but probably more trouble than it's worth.
Closes#31715
Minio does not support dynamic ports. The workaround here is to scan for a free port first. This is
not foolproof, but as we don't expect too many of these builds to run at once on the same machine,
this should do the trick.
Closes#32701Closes#32208
3rd party tests are failing because the repository-s3 is expecting some
enviromnent variables in order to test session tokens but the CI job is
not ready yet to provide those. This pull request relaxes the constraints
on the presence of env vars so that the 3rd party tests can still be
executed on CI.
closes#31813
Adds a Minio fixture to run the S3 repository tests against Minio. Also collapses the single qa
subproject into the s3-repository project, which simplifies the code structure (having it all in one
place) and helps to avoid having too many Gradle subprojects.
Adds the ability to reread and decrypt the local node keystore.
Commonly, the contents of the keystore, backing the `SecureSettings`,
are not retrievable except during node initialization. This changes that
by adding a new API which broadcasts a password to every node. The
password is used to decrypt the local keystore and use it to populate
a `Settings` object that is passes to all the plugins implementing the
`ReloadablePlugin` interface. The plugin is then responsible to do
whatever "reload" means in his case. When the `reload`handler returns,
the keystore is closed and its contents are no longer retrievable.
Password is never stored persistently on any node.
Plugins that have been moded in this commit are: `repository-azure`,
`repository-s3`, `repository-gcs` and `discovery-ec2`.
This commit moves the repository-s3 fixture test added in #29296 in a
new `repository-s3/qa/amazon-s3` project. This new project allows the
REST integration tests to be executed using the real S3 service when
all the required environment variables are provided. When no env var
is provided, then the tests are executed using the fixture added
in #29296.
The REST tests located at the `repository-s3`plugin project now only
verify that the plugin is correctly loaded.
The REST tests have been adapted to allow a bucket name and a base
path to be specified as env vars. This way it is possible to run the tests
with different base paths (could be anything, like a CI job name or a
branch name) without multiplicating buckets.
Related to #29349
This commit adds a new fixture that emulates a S3 service in order to
improve the existing integration tests. This is very similar to what has
been made for Google Cloud Storage in #28788, and such tests would
have helped a lot to catch bugs like #22534.
The AmazonS3Fixture is brittle and only implements the very necessary
stuff for the S3 repository to work, but at least it works and can be
adapted for specific tests needs.
The AWS SDK has a transitive dependency on Jackson Databind. While the
AWS SDK was recently upgraded, the Jackson Databind dependency was not
pulled along with it to the version that the AWS SDK depends on. This
commit upgrades the dependencies for discovery-ec2 and repository-s3
plugins to match versions on the AWS SDK transitive dependencies.
Relates #27361
With Gradle 4.1 and newer JDK versions, we can finally invoke Gradle directly using a JDK9 JAVA_HOME without requiring a JDK8 to "bootstrap" the build. As the thirdPartyAudit task runs within the JVM that Gradle runs in, it needs to be adapted now to be JDK9 aware.
This commit also changes the `JavaCompile` tasks to only fork if necessary (i.e. when Gradle's JVM and JAVA_HOME's JVM differ).
Specifying s3 access and secret keys inside repository settings are not
secure. However, until there is a way to dynamically update secure
settings, this is the only way to dynamically add repositories with
credentials that are not known at node startup time. This commit adds
back `access_key` and `secret_key` s3 repository settings, but protects
it with a required system property `allow_insecure_settings`.
The S3 repostiory has many levels of settings it looks at to create a
repository, and these settings were read at repository creation time.
This meant secure settings like access and secret keys had to be
available after node construction. This change makes setting loading for
every except repository level settings eager, so that secure settings
can be stashed, and the keystore can once again be closed after
bootstrapping the node is complete.
This commit puts all the classes in the repository-s3 plugin into a
single package. In addition to simplifying the plugin, it will make it
easier to test as things that should be package private will not be
difficult to use inside tests alone.
* S3 repository: Deprecate specifying credentials through env vars and sys props
This is a follow up to #22479, where storing credentials secure way was
added.
Armin Braun
Mark Vieira
Alpar Torok
Jason Tedor
Ryan Ernst
Tanguy Leroux
Christoph Büscher
Yannick Welsch
Vladimir Dolzhenko
Albert Zaharovits