Fixes two minor problems reported after merge of #36731:
1. Name the creation method to make clear it only creates
if necessary
2. Avoid multiple simultaneous in-flight creation requests
The test testClusterInfoServiceInformationClearOnError relies on timing behavior. It sets
InternalClusterInfoService.INTERNAL_CLUSTER_INFO_TIMEOUT_SETTING to 1s and relies on the
fact that the stats request completes within that timeframe (which our ever-so-slow CI seems to
violate at times). Unfortunately the logging has been misimplemented in InternalClusterInfoService,
so the corresponding log messages showing that the requests have timed out are missing for this.
The issue can be locally reproduced by reducing the timeout to something lower.
Closes#36554
If the master sends both its follower checks just before disconnection then
neither will receive a response, meaning it must wait for the checks to time
out and send another in order to detect the disconnection and stand down.
Closes#36788
Single-node discovery is not persisting cluster states, which was caused by a recent 7.0-only
refactoring. This commit ensures that the cluster state is properly persisted when using single-node
discovery and adds a corresponding test.
* Replace 0L with an UNASSIGNED_PRIMARY_TERM constant
0 is an illegal value for a primary term that is often used to indicate
the primary term isn't assigned or is irrelevant. This PR replaces the
usage of 0 with a constant, to improve readability and so it can be
tracked and if needed, replaced.
* feedback
The default index_prefix settings will index prefixes of between 2 and 5 characters in length.
Currently, if a prefix search falls outside of this range at either end we fall back to a standard prefix
expansion, which is still very expensive for single character prefixes. However, we have an option
here to use a wildcard expansion rather than a prefix expansion, so that a query of a* gets remapped
to a? against the _index_prefix field - likely to be a very small set of terms, and certain to be much
smaller than a* against the whole index.
This commit adds this extra level of mapping for any prefix term whose length is one less than
the min_chars parameter of the index_prefixes field.
Today we might corrupt a fully deleted segment which is then pruned
once a snapshot is taken. This causes random test failures in CorruptedFileIT.
This change hardens the selection of files to corrupt and removes some fragile
code preventing fully deleted segments to be taken into account.
Closes#36526
Today we try to load the ingest-geoip databases lazily. Currently they
are loaded as soon as any pipeline that uses an ingest-geoip processor
is created. This is not lazy enough. For example, we could only load the
databases the first time that they are actually used. This would ensure
that we load the minimal set of data to support an in-use pipeline
(instead of *all* of the data). This can come up in a couple of
ways. One is when a subset of the database is used (e.g., the city
database versus the country database versus the ASN database). Another
is when the plugins are installed on non-ingest nodes (e.g., master-only
nodes); we would never use the database in this case yet they are
currently being loaded occupying ~60 MB of the heap. This commit makes
the ingest-geoip databases as lazy as possible.
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
Commit #36786 updated docs and strings to reference transport.port instead of
transport.tcp.port. However, this breaks backwards compatibility tests
as the tests rely on string configurations and transport.port does not
exist prior to 6.6. This commit reverts the places were we reference
transport.tcp.port for tests. This work will need to be reintroduced in
a backwards compatible way.
* ML having delayed data detection create annotations
* adding upsertAsDoc, audit, and changing user
* changing update to just index the doc with the id set
Lucene 7.6 uses a smaller encoding for LatLonShape. This commit forks the LatLonShape classes to Elasticsearch's local lucene package. These classes will be removed on the release of Lucene 7.6.
The logstash management template was named in such a way as to confuse
users, who misunderstood it to be a template for indices created by
logstash. It is now renamed to more clearly communicate its purpose and
match the format of the other templates for system indices.
The parser used for rollup configs in _meta fields was not able to
handle unrelated data in the meta field. If an unrelated object
was encountered, it would half-consume the JSON object, realize it
wasn'ta rollup config, then stop parsing. This would leave the object
halfway consumed and the parsing framework would throw an exception.
This commit replaces the parsing logic with a set of minimal parsers,
each for the specific component we care about (`_doc`, `_meta`,
`_rollup`) and configured to ignore unknown fields where applicable.
More verbose, but less hacky than before and should be more robust.
Also adds tests (randomized and explicit) to make sure this doesn't
break in the future.
This is related to #36652. In 7.0 we plan to deprecate a number of
settings that make reference to the concept of a tcp transport. We
mostly just have a single transport type now (based on tcp). Settings
should only reference tcp if they are referring to socket options. This
commit updates the settings in the docs. And removes string usages of
the old settings. Additionally it adds a missing remote compress setting
to the docs.
TransportWriteAction.WriteReplicaResult is not properly synchronized, which can lead to a data race
between the thread that calls respond and the AsyncAfterWriteAction that calls either onSuccess or
onFailure. This data race results in the response listener not being called, which ultimately results in
a stuck replication task on the replica.
This commit is related to #36127. It adds a CcrRestoreSourceService to
track Engine.IndexCommitRef need for in-process file restores. When a
follower starts restoring a shard through the CcrRepository it opens a
session with the leader through the PutCcrRestoreSessionAction. The
leader responds to the request by telling the follower what files it
needs to fetch for a restore. This is not yet implemented.
Once, the restore is complete, the follower closes the session with the
DeleteCcrRestoreSessionAction action.
This commit removes the originalSettings member from Node. It was only
needed to allows test clusters to recreate the node in certain
situations. Instead, the test cluster now keeps track of these settings.
The joda epoch parsing code currently supports passing epoch time as a
number in scientific notation. However, no systems appear to exist which
output timestamps in scientific notation. In java time, it is
particularly complex to implement scientific notation timestamp parsing
within a DateTimeFormatter. This commit adds a deprecation warning when
the epoch time parsers in joda parse scientific notation, so that it can
be removed when switching to java time.
joda are passed a time in scientific notation.
* [ML] Job and datafeed mappings with index template (#32719)
Index mappings for the configuration documents
* [ML] Job config document CRUD operations (#32738)
* [ML] Datafeed config CRUD operations (#32854)
* [ML] Change JobManager to work with Job config in index (#33064)
* [ML] Change Datafeed actions to read config from the config index (#33273)
* [ML] Allocate jobs based on JobParams rather than cluster state config (#33994)
* [ML] Return missing job error when .ml-config is does not exist (#34177)
* [ML] Close job in index (#34217)
* [ML] Adjust finalize job action to work with documents (#34226)
* [ML] Job in index: Datafeed node selector (#34218)
* [ML] Job in Index: Stop and preview datafeed (#34605)
* [ML] Delete job document (#34595)
* [ML] Convert job data remover to work with index configs (#34532)
* [ML] Job in index: Get datafeed and job stats from index (#34645)
* [ML] Job in Index: Convert get calendar events to index docs (#34710)
* [ML] Job in index: delete filter action (#34642)
This changes the delete filter action to search
for jobs using the filter to be deleted in the index
rather than the cluster state.
* [ML] Job in Index: Enable integ tests (#34851)
Enables the ml integration tests excluding the rolling upgrade tests and a lot of fixes to
make the tests pass again.
* [ML] Reimplement established model memory (#35500)
This is the 7.0 implementation of a master node service to
keep track of the native process memory requirement of each ML
job with an associated native process.
The new ML memory tracker service works when the whole cluster
is upgraded to at least version 6.6. For mixed version clusters
the old mechanism of established model memory stored on the job
in cluster state was used. This means that the old (and complex)
code to keep established model memory up to date on the job object
has been removed in 7.0.
Forward port of #35263
* [ML] Need to wait for shards to replicate in distributed test (#35541)
Because the cluster was expanded from 1 node to 3 indices would
initially start off with 0 replicas. If the original node was
killed before auto-expansion to 1 replica was complete then
the test would fail because the indices would be unavailable.
* [ML] DelayedDataCheckConfig index mappings (#35646)
* [ML] JIndex: Restore finalize job action (#35939)
* [ML] Replace Version.CURRENT in streaming functions (#36118)
* [ML] Use 'anomaly-detector' in job config doc name (#36254)
* [ML] Job In Index: Migrate config from the clusterstate (#35834)
Migrate ML configuration from clusterstate to index for closed jobs
only once all nodes are v6.6.0 or higher
* [ML] Check groups against job Ids on update (#36317)
* [ML] Adapt to periodic persistent task refresh (#36633)
* [ML] Adapt to periodic persistent task refresh
If https://github.com/elastic/elasticsearch/pull/36069/files is
merged then the approach for reallocating ML persistent tasks
after refreshing job memory requirements can be simplified.
This change begins the simplification process.
* Remove AwaitsFix and implement TODO
* [ML] Default search size for configs
* Fix TooManyJobsIT.testMultipleNodes
Two problems:
1. Stack overflow during async iteration when lots of
jobs on same machine
2. Not effectively setting search size in all cases
* Use execute() instead of submit() in MlMemoryTracker
We don't need a Future to wait for completion
* [ML][TEST] Fix NPE in JobManagerTests
* [ML] JIindex: Limit the size of bulk migrations (#36481)
* [ML] Prevent updates and upgrade tests (#36649)
* [FEATURE][ML] Add cluster setting that enables/disables config migration (#36700)
This commit adds a cluster settings called `xpack.ml.enable_config_migration`.
The setting is `true` by default. When set to `false`, no config migration will
be attempted and non-migrated resources (e.g. jobs, datafeeds) will be able
to be updated normally.
Relates #32905
* [ML] Snapshot ml configs before migrating (#36645)
* [FEATURE][ML] Split in batches and migrate all jobs and datafeeds (#36716)
Relates #32905
* SQL: Fix translation of LIKE/RLIKE keywords (#36672)
* SQL: Fix translation of LIKE/RLIKE keywords
Refactor Like/RLike functions to simplify internals and improve query
translation when chained or within a script context.
Fix#36039Fix#36584
* Fixing line length for EnvironmentTests and RecoveryTests (#36657)
Relates #34884
* Add back one line removed by mistake regarding java version check and
COMPAT jvm parameter existence
* Do not resolve addresses in remote connection info (#36671)
The remote connection info API leads to resolving addresses of seed
nodes when invoked. This is problematic because if a hostname fails to
resolve, we would not display any remote connection info. Yet, a
hostname not resolving can happen across remote clusters, especially in
the modern world of cloud services with dynamically chaning
IPs. Instead, the remote connection info API should be providing the
configured seed nodes. This commit changes the remote connection info to
display the configured seed nodes, avoiding a hostname resolution. Note
that care was taken to preserve backwards compatibility with previous
versions that expect the remote connection info to serialize a transport
address instead of a string representing the hostname.
* [Painless] Add boxed type to boxed type casts for method/return (#36571)
This adds implicit boxed type to boxed types casts for non-def types to create asymmetric casting relative to the def type when calling methods or returning values. This means that a user calling a method taking an Integer can call it with a Byte, Short, etc. legally which matches the way def works. This creates consistency in the casting model that did not previously exist.
* SNAPSHOTS: Adjust BwC Versions in Restore Logic (#36718)
* Re-enables bwc tests with adjusted version conditions now that #36397 enables concurrent snapshots in 6.6+
* ingest: fix on_failure with Drop processor (#36686)
This commit allows a document to be dropped when a Drop processor
is used in the on_failure fork of the processor chain.
Fixes#36151
* Initialize startup `CcrRepositories` (#36730)
Currently, the CcrRepositoryManger only listens for settings updates
and installs new repositories. It does not install the repositories that
are in the initial settings. This commit, modifies the manager to
install the initial repositories. Additionally, it modifies the ccr
integration test to configure the remote leader node at startup, instead
of using a settings update.
* [TEST] fix float comparison in RandomObjects#getExpectedParsedValue
This commit fixes a test bug introduced with #36597. This caused some
test failure as stored field values comparisons would not work when CBOR
xcontent type was used.
Closes#29080
* [Geo] Integrate Lucene's LatLonShape (BKD Backed GeoShapes) as default `geo_shape` indexing approach (#35320)
This commit exposes lucene's LatLonShape field as the
default type in GeoShapeFieldMapper. To use the new
indexing approach, simply set "type" : "geo_shape" in
the mappings without setting any of the strategy, precision,
tree_levels, or distance_error_pct parameters. Note the
following when using the new indexing approach:
* geo_shape query does not support querying by
MULTIPOINT.
* LINESTRING and MULTILINESTRING queries do not
yet support WITHIN relation.
* CONTAINS relation is not yet supported.
The tree, precision, tree_levels, distance_error_pct,
and points_only parameters are deprecated.
* TESTS:Debug Log. IndexStatsIT#testFilterCacheStats
* ingest: support default pipelines + bulk upserts (#36618)
This commit adds support to enable bulk upserts to use an index's
default pipeline. Bulk upsert, doc_as_upsert, and script_as_upsert
are all supported.
However, bulk script_as_upsert has slightly surprising behavior since
the pipeline is executed _before_ the script is evaluated. This means
that the pipeline only has access the data found in the upsert field
of the script_as_upsert. The non-bulk script_as_upsert (existing behavior)
runs the pipeline _after_ the script is executed. This commit
does _not_ attempt to consolidate the bulk and non-bulk behavior for
script_as_upsert.
This commit also adds additional testing for the non-bulk behavior,
which remains unchanged with this commit.
fixes#36219
* Fix duplicate phrase in shrink/split error message (#36734)
This commit removes a duplicate "must be a" from the shrink/split error
messages.
* Deprecate types in get_source and exist_source (#36426)
This change adds a new untyped endpoint `{index}/_source/{id}` for both the
GET and the HEAD methods to get the source of a document or check for its
existance. It also adds deprecation warnings to RestGetSourceAction that emit
a warning when the old deprecated "type" parameter is still used. Also updating
documentation and tests where appropriate.
Relates to #35190
* Revert "[Geo] Integrate Lucene's LatLonShape (BKD Backed GeoShapes) as default `geo_shape` indexing approach (#35320)"
This reverts commit 5bc7822562.
* Enhance Invalidate Token API (#35388)
This change:
- Adds functionality to invalidate all (refresh+access) tokens for all users of a realm
- Adds functionality to invalidate all (refresh+access)tokens for a user in all realms
- Adds functionality to invalidate all (refresh+access) tokens for a user in a specific realm
- Changes the response format for the invalidate token API to contain information about the
number of the invalidated tokens and possible errors that were encountered.
- Updates the API Documentation
After back-porting to 6.x, the `created` field will be removed from master as a field in the
response
Resolves: #35115
Relates: #34556
* Add raw sort values to SearchSortValues transport serialization (#36617)
In order for CCS alternate execution mode (see #32125) to be able to do the final reduction step on the CCS coordinating node, we need to serialize additional info in the transport layer as part of each `SearchHit`. Sort values are already present but they are formatted according to the provided `DocValueFormat` provided. The CCS node needs to be able to reconstruct the lucene `FieldDoc` to include in the `TopFieldDocs` and `CollapseTopFieldDocs` which will feed the `mergeTopDocs` method used to reduce multiple search responses (one per cluster) into one.
This commit adds such information to the `SearchSortValues` and exposes it through a new getter method added to `SearchHit` for retrieval. This info is only serialized at transport and never printed out at REST.
* Watcher: Ensure all internal search requests count hits (#36697)
In previous commits only the stored toXContent version of a search
request was using the old format. However an executed search request was
already disabling hit counts. In 7.0 hit counts will stay enabled by
default to allow for proper migration.
Closes#36177
* [TEST] Ensure shard follow tasks have really stopped.
Relates to #36696
* Ensure MapperService#getAllMetaFields elements order is deterministic (#36739)
MapperService#getAllMetaFields returns an array, which is created out of
an `ObjectHashSet`. Such set does not guarantee deterministic hash
ordering. The array returned by its toArray may be sorted differently
at each run. This caused some repeatability issues in our tests (see #29080)
as we pick random fields from the array of possible metadata fields,
but that won't be repeatable if the input array is sorted differently at
every run. Once setting the tests seed, hppc picks that up and the sorting is
deterministic, but failures don't repeat with the seed that gets printed out
originally (as a seed was not originally set).
See also https://issues.carrot2.org/projects/HPPC/issues/HPPC-173.
With this commit, we simply create a static sorted array that is used for
`getAllMetaFields`. The change is in production code but really affects
only testing as the only production usage of this method was to iterate
through all values when parsing fields in the high-level REST client code.
Anyways, this seems like a good change as returning an array would imply
that it's deterministically sorted.
* Expose Sequence Number based Optimistic Concurrency Control in the rest layer (#36721)
Relates #36148
Relates #10708
* [ML] Mute MlDistributedFailureIT
* [Geo] Expose BKDBackedGeoShapes as new VECTOR strategy
This commit exposes lucene's LatLonShape field as a new
strategy in GeoShapeFieldMapper. To use the new indexing
approach, strategy should be set to "vector" in the
geo_shape field mapper. If the tree parameter is set
the mapper will throw an IAE. Note the following:
When using vector strategy:
* geo_shape query does not support querying by POINT,
MULTIPOINT, or GEOMETRYCOLLECTION.
* LINESTRING and MULTILINESTRING queries do not support
WITHIN relation.
* CONTAINS relation is not supported.
* The tree, precision, tree_levels, distance_error_pct,
and points_only parameters will not throw an exception
but they have no effect and will be marked as
deprecated..
All other features are supported.
* revert change to PercolatorFieldMapper
* fix ExistsQuery for geo_shape vector strategy
* add deprecation logging for tree, precision, tree_levels, distance_error_pct, and points_only
* initial update to geoshape docs, including mapping migration updates
* initial support for GeoCollection queries
* fix docs and javadoc errors
* clean up geocollection queries
* set deprecated mapping tests to NOTCONSOLE
* fix geo-shape mapper asciidoc mapping and test warnings
* add support for point queries using LatLonShapeBoundingBoxQuery
* update GeoShapeQueryBuilderTests to include POINT queries for VECTOR strategy. Other comment cleanups
* add lucene geometry build testing to ShapeBuilder tests
* remove deprecated prefix tree mapping from geo-shape.asciidoc
* refactor GeoShapeFieldMapper into LegacyGeoShapeFieldMapper and GeoShapeFieldMapper
Both classes derive from BaseGeoShapeFieldMapper that provides shared parameters:
coerce, ignoreMalformed, ignore_z_value, orientation.
* update docs to remove vector strategy
* fix GeometryCollectionBuilder#buildLucene to return the object created by the shape builder
* fix LineLength failure in GeoJsonShapeParserTests
* ShapeMapper refactor changes from PR feedback
* fix typo in geo-shape.asciidoc
* ignore circle test in docs
* update indexing-approach ref to geoshape-indexing-approach
* add warnings check for LegacyGeoShapeFieldMapper to AbstractBuilderTestCase
* fix deprecatedParameters setup
* update indexing approach
* fixing unexpected warnings failures
* move orientation back to field type
* remove if in LegacyGeoShapeFieldMapper#doXContent. Fix GeoShapeFieldMapper to work with double array as a point
* fix indexing-approach link in circle section of geoshape docs
* add strategy to deprecation warnings check
* fix test failures
* fix typo in QueryStringQueryBuilderTests
* fix total hits to totalHits().value
* fix version number
* add version check to BaseGeoShapeFieldMapper
* fix line length!
* revert version check in BaseGeoShapeFieldMapper
* Fix serialization of mappings of legacy shapes.
The first example given is missing the two single-token cases for "is" and "a".
The later usage example is slightly wrong in that custom analyzers should
go under `settings.analysis.analyzer`.
This change fixes the rollup statistics regarding search times. Search times are
computed from the first query and never updated. This commit adds the missing
calls to the subsequent search.
Fix grammar so that each element inside the list of values for IN
is a valueExpression and not a more generic expression. Introduce a
mapping for context names as some rules in the grammar are exited with
a different rule from the one they entered.This helps so that the decrement
of depth counts in the Parser's CircuitBreakerListener works correctly.
For the list of values for IN, don't count the
PrimaryExpressionContext as this is not visited on exitRule() due to
the peculiarity in our gramamr with the predicate and predicated.
Fixes: #36592
* Deprecate types in index API
- deprecate type-based constructors of IndexRequest
- update tests to use typeless IndexRequest constructors
- no yaml tests as they have been already added in #35790
Relates to #35190