This change aims to fix our setup in CI so that we can run 7.x in
FIPS 140 mode. The major issue that we have in 7.x and did not
have in master is that we can't use the diagnostic trust manager
in FIPS mode in Java 8 with SunJSSE in FIPS approved mode as it
explicitly disallows the wrapping of X509TrustManager.
Previous attempts like #56427 and #52211 focused on disabling the
setting in all of our tests when creating a Settings object or
on setting fips_mode.enabled accordingly (which implicitly disables
the diagnostic trust manager). The attempts weren't future proof
though as nothing would forbid someone to add new tests without
setting the necessary setting and forcing this would be very
inconvenient for any other case ( see
#56427 (comment) for the full argumentation).
This change introduces a runtime check in SSLService that overrides
the configuration value of xpack.security.ssl.diagnose.trust and
disables the diagnostic trust manager when we are running in Java 8
and the SunJSSE provider is set in FIPS mode.
I've noticed that a lot of our tests are using deprecated static methods
from the Hamcrest matchers. While this is not a big deal in any
objective sense, it seems like a small good thing to reduce compilation
warnings and be ready for a new release of the matcher library if we
need to upgrade. I've also switched a few other methods in tests that
have drop-in replacements.
- Enable SunJGSS provider for Kerberos tests
- Handle the fact that in the decrypt method in KeyStoreWrapper might
not throw immediately when the GCM cipher is from BouncyCastle FIPS
and we end up with a DataInputStream that has reached it's end.
- Disable tests, jarHell, testingConventions for ingest attachment
plugin. We don't support this plugin (and document this) in FIPS
mode.
- Don't attempt to install ingest-attachment in smoke-test-plugins
Now that the FIPS 140 security provider is simply a test dependency
we don't need the thirdPartyAudit exceptions, but plugin-cli and
transport-netty4 do need jarHell disabled as they use the non fips
BouncyCastle security provider as a test dependency too.
This change changes the way to run our test suites in
JVMs configured in FIPS 140 approved mode. It does so by:
- Configuring any given runtime Java in FIPS mode with the bundled
policy and security properties files, setting the system
properties java.security.properties and java.security.policy
with the == operator that overrides the default JVM properties
and policy.
- When runtime java is 11 and higher, using BouncyCastle FIPS
Cryptographic provider and BCJSSE in FIPS mode. These are
used as testRuntime dependencies for unit
tests and internal clusters, and copied (relevant jars)
explicitly to the lib directory for testclusters used in REST tests
- When runtime java is 8, using BouncyCastle FIPS
Cryptographic provider and SunJSSE in FIPS mode.
Running the tests in FIPS 140 approved mode doesn't require an
additional configuration either in CI workers or locally and is
controlled by specifying -Dtests.fips.enabled=true
Our docs specifically mention that CBOR is supported when ingesting attachments. However this is not tested anywhere.
This adds a test, that uses specifically CBOR format in its IndexRequest and another one that behaves like CBOR in the ingest attachment unit tests.
Backport of #48849. Update `.editorconfig` to make the Java settings the
default for all files, and then apply a 2-space indent to all `*.gradle`
files. Then reformat all the files.
This commit introduces a consistent, and type-safe manner for handling
global build parameters through out our build logic. Primarily this
replaces the existing usages of extra properties with static accessors.
It also introduces and explicit API for initialization and mutation of
any such parameters, as well as better error handling for uninitialized
or eager access of parameter values.
Closes#42042
The xlint exclusions of the following plugins were removed:
* ingest-attachment.
* mapper-size.
* transport-nio. Removing the -try exclusion required some work, because
the NettyAdaptor implements AutoCloseable and NettyAdaptor#close() method
could throw an InterruptedException (ChannelFuture#await() and a generic
Exception is re-thrown, which maybe an ChannelFuture). The easiest way
around this to me seemed that NettyAdaptor should not implement AutoCloseable,
because it is not directly used in a try-with-resources statement.
Relates to #40366
The apache commons http client implementations recently released
versions that solve TLS compatibility issues with the new TLS engine
that supports TLSv1.3 with JDK 11. This change updates our code to
use these versions since JDK 11 is a supported JDK and we should
allow the use of TLSv1.3.
This PR attempts to remove all typed calls from our YAML REST tests. The PR adds include_type_name: false to create index requests that use a mapping and also to put mapping requests. It also removes _type from index requests where they haven't already been removed. The PR ignores tests named *_with_types.yml since this are specifically testing typed API behaviour.
The change also includes changing the test harness to add the type _doc to index, update, get and bulk requests that do not specify the document type when the test is running against a mixed 7.x/6.x cluster.
The contains syntax was added in #30874 but the skips were not properly
put in place.
The java runner has the feature so the tests will run as part of the
build, but language clients will be able to support it at their own
pace.
- third party audit detects jar hell with JDK so we disable it
- jdk non portable in forbiddenapis detects classes being used from the
JDK ( for fips ) that are not portable, this is intended so we don't
scan for it on fips.
- different exclusion rules for third party audit on fips
Closes#33179
The new implementation is functional equivalent with the old, ant based one.
It parses task standard error to get the missing classes and violations in the same way.
I considered re-using ForbiddenApisCliTask but Gradle makes it hard to build inheritance with tasks that have task actions , since the order of the task actions can't be controlled.
This inheritance isn't dully desired either as the third party audit task is much more opinionated and we don't want to expose some of the configuration.
We could probably extract a common base class without any task actions, but probably more trouble than it's worth.
Closes#31715
* Upgrade bouncycastle
Required to fix
`bcprov-jdk15on-1.55.jar; invalid manifest format `
on jdk 11
* Downgrade bouncycastle to avoid invalid manifest
* Add checksum for new jars
* Update tika permissions for jdk 11
* Mute test failing on jdk 11
* Add JDK11 to CI
* Thread#stop(Throwable) was removed
http://mail.openjdk.java.net/pipermail/core-libs-dev/2018-June/053536.html
* Disable failing tests #31456
* Temprorarily disable doc tests
To see if there are other failures on JDK11
* Only blacklist specific doc tests
* Disable only failing tests in ingest attachment plugin
* Mute failing HDFS tests #31498
* Mute failing lang-painless tests #31500
* Fix backwards compatability builds
Fix JAVA version to 10 for ES 6.3
* Add 6.x to bwx -> java10
* Prefix out and err from buildBwcVersion for readability
```
> Task :distribution:bwc:next-bugfix-snapshot:buildBwcVersion
[bwc] :buildSrc:compileJava
[bwc] WARNING: An illegal reflective access operation has occurred
[bwc] WARNING: Illegal reflective access by org.codehaus.groovy.reflection.CachedClass (file:/home/alpar/.gradle/wrapper/dists/gradle-4.5-all/cg9lyzfg3iwv6fa00os9gcgj4/gradle-4.5/lib/groovy-all-2.4.12.jar) to method java.lang.Object.finalize()
[bwc] WARNING: Please consider reporting this to the maintainers of org.codehaus.groovy.reflection.CachedClass
[bwc] WARNING: Use --illegal-access=warn to enable warnings of further illegal reflective access operations
[bwc] WARNING: All illegal access operations will be denied in a future release
[bwc] :buildSrc:compileGroovy
[bwc] :buildSrc:writeVersionProperties
[bwc] :buildSrc:processResources
[bwc] :buildSrc:classes
[bwc] :buildSrc:jar
```
* Also set RUNTIME_JAVA_HOME for bwcBuild
So that we can make sure it's not too new for the build to understand.
* Align bouncycastle dependency
* fix painles array tets
closes#31500
* Update jar checksums
* Keep 8/10 runtime/compile untill consensus builds on 11
* Only skip failing tests if running on Java 11
* Failures are dependent of compile java version not runtime
* Condition doc test exceptions on compiler java version as well
* Disable hdfs tests based on runtime java
* Set runtime java to minimum supported for bwc
* PR review
* Add comment with ticket for forbidden apis
* remove left-over comment
* make sure of the property for plugins
* skip installing modules if these exist in the distribution
* Log the distrbution being ran
* Don't allow running with integ-tests-zip passed externally
* top level x-pack/qa can't run with oss distro
* Add support for matching objects in lists
Makes it possible to have a key that points to a list and assert that a
certain object is present in the list. All keys have to be present and
values have to match. The objects in the source list may have additional
fields.
example:
```
match: { 'nodes.$master.plugins': { name: ingest-attachment } }
```
* Update plugin and module tests to work with other distributions
Some of the tests expected that the integration tests will always be ran
with the `integ-test-zip` distribution so that there will be no other
plugins loaded.
With this change, we check for the presence of the plugin without
assuming exclusivity.
* Allow modules to run on other distros as well
To match the behavior of tets.distributions
* Add and use a new `contains` assertion
Replaces the previus changes that caused `match` to do a partial match.
* Implement PR review comments
We today support a global `indexed_chars` processor parameter. But in some cases, users would like to set this limit depending on the document itself.
It used to be supported in mapper-attachments plugin by extracting the limit value from a meta field in the document sent to indexation process.
We add an option which reads this limit value from the document itself
by adding a setting named `indexed_chars_field`.
Which allows running:
```
PUT _ingest/pipeline/attachment
{
"description" : "Extract attachment information. Used to parse pdf and office files",
"processors" : [
{
"attachment" : {
"field" : "data",
"indexed_chars_field" : "size"
}
}
]
}
```
Then index either:
```
PUT index/doc/1?pipeline=attachment
{
"data": "BASE64"
}
```
Which will use the default value (or the one defined by `indexed_chars`)
Or
```
PUT index/doc/2?pipeline=attachment
{
"data": "BASE64",
"size": 1000
}
```
Closes#28942
The TikaImpl#parse method comment sounds like this method is only used
in the same package for testing, but AttachmentProcessor uses it outside
of testing, so we should remove this comment.
Tika parsers need accessDeclaredMembers because ZipFile needs
accessDeclaredMembers on JDK 10. This commit guards adding this
permission to parsers so that the permission is only granted on JDK
10. Additionally, we add an assertion that forces us to check if the
permission is still needed in JDK 11.
Relates #28603
Tests on jdk10 were failing because of a change in its ZipFile implementation
that now needs `accessDeclaredMembers` permissions. This change adds
the missing permission to the plugins security policy and TikaImpl.
Closes#28568
This one is interesting. The third party audit task runs inside the
Gradle JVM. This means that if Gradle is started on JDK 8, the third
party audit tasks will fail as a result of the changes to support
building Elasticsearch with the JDK 9 compiler. This commit reverts the
third party audit changes to support running this task when Gradle is
started with JDK 8.
Relates #28256
This commit modifies the build to require JDK 9 for
compilation. Henceforth, we will compile with a JDK 9 compiler targeting
JDK 8 as the class file format. Optionally, RUNTIME_JAVA_HOME can be set
as the runtime JDK used for running tests. To enable this change, we
separate the meaning of the compiler Java home versus the runtime Java
home. If the runtime Java home is not set (via RUNTIME_JAVA_HOME) then
we fallback to using JAVA_HOME as the runtime Java home. This enables:
- developers only have to set one Java home (JAVA_HOME)
- developers can set an optional Java home (RUNTIME_JAVA_HOME) to test
on the minimum supported runtime
- we can test compiling with JDK 9 running on JDK 8 and compiling with
JDK 9 running on JDK 9 in CI
This commit makes the security code aware of the Java 9 FilePermission changes (see #21534) and allows us to remove the `jdk.io.permissionsUseCanonicalPath` system property.
With Gradle 4.1 and newer JDK versions, we can finally invoke Gradle directly using a JDK9 JAVA_HOME without requiring a JDK8 to "bootstrap" the build. As the thirdPartyAudit task runs within the JVM that Gradle runs in, it needs to be adapted now to be JDK9 aware.
This commit also changes the `JavaCompile` tasks to only fork if necessary (i.e. when Gradle's JVM and JAVA_HOME's JVM differ).
This commit renames all rest test files to use the .yml extension
instead of .yaml. This way the extension used within all of
elasticsearch for yaml is consistent.
This change simplifies how the rest test runner finds test files and
removes all leniency. Previously multiple prefixes and suffixes would
be tried, and tests could exist inside or outside of the classpath,
although outside of the classpath never quite worked. Now only classpath
tests are supported, and only one resource prefix is supported,
`/rest-api-spec/tests`.
closes#20240
This commit renames the random ASCII helper methods in ESTestCase. This
is because this method ultimately uses the random ASCII methods from
randomized runner, but these methods actually only produce random
strings generated from [a-zA-Z].
Relates #23886
After the removal of the joda time hack we used to have, we can cleanup
the codebase handling in security, jarhell and plugins to be more picky
about uniqueness. This was originally in #18959 which was never merged.
closes#18959
Let's make our life easier when debugging/testing.
Also having a flat dir helps us to compare or "synchronize" more easily with Tika project files.
Closes#22958.
Actually we never supported Visio files but we are failing hard (kill a node) when that kind of file is provided.
See https://github.com/elastic/elasticsearch/pull/22079#issuecomment-277035357
This commits excludes Visio parsing from Tika so it does not fail anymore but returns empty content instead.
As a side effect, it also removes support for POTM files.
Closes#22077.
In some cases (apparently with outlook files), mime4j library is needed.
We removed it in the past which can cause elasticsearch to crash when you are using ingest-attachment (and probably mapper-attachments as well in 2.x series) with a file which requires this library.
Similar problem as the one reported at #22077.
Ioannis Kakavas
William Brafford
Jake Landis
Alexander Reelsen
Rory Hunter
Mark Vieira
Igor Motov
Martijn van Groningen
Jason Tedor
Jay Modi
Colin Goodheart-Smithe
Alpar Torok
Ioannis Kakavas
Armin Braun
Jack Conradson
Tanguy Leroux
David Pilato
Christoph Büscher
Tal Levy
Guillaume Le Floch
Yannick Welsch
Ryan Ernst