`ToXContentObject` extends `ToXContent` without adding new methods to it, while allowing to mark classes that output complete xcontent objects to distinguish them from classes that require starting and ending an anonymous object externally.
Ideally ToXContent would be renamed to ToXContentFragment, but that would be a huge change in our codebase, hence we simply document the fact that toXContent outputs fragments with no guarantees that the output is valid per se without an external ancestor.
Relates to #16347
This is related to #22116. A logIfNecessary() call makes a call to
NetworkInterface.getInterfaceAddresses() requiring SocketPermission
connect privileges. By moving this to bootstrap the logging call can be
made before installing the SecurityManager.
Today when an index is shrunk the version information is not carried over
from the source to the target index. This can cause major issues like mapping
incompatibilities for instance if an index from a previous major version is shrunk.
This commit ensures that all version information from the soruce index is preserved
when a shrunk index is created.
Closes#22373
ParseFieldMatcher as well as ParseFieldMatcherSupplier will be soon removed, hence the ObjectParser's context doesn't need to be a ParseFieldMatcherSupplier anymore. That will allow to remove ParseFieldMatcherSupplier's implementations, little by little.
The test currently checks that the recovering shard is not failed when it is not a primary relocation that has moved past the finalization step.
Checking if it has moved past that step is done by intercepting the request between the replication source and the target and checking if it has seen
then WAIT_FOR_CLUSTERSTATE action as this is the next action that is called after finalization. This action can, however, occur only after the shard was
already failed, and thus trip the assertion. This commit changes the check to look out for the FINALIZE action, independently of whether it succeeded or not.
#22325 changed the recovery retry logic to use unique recovery ids. The change also introduced an issue, however, which made it possible for the shard store to be closed under CancellableThreads, triggering assertions in the node locking logic. This commit limits the use of CancellableThreads only to the part where we wait on the old recovery target to be closed.
Today we execute the low level handshake on the TCP layer in #connectToNode.
If #openConnection is used directly, which is truly expert, no handshake is executed
which allows connecting to nodes that are not necessarily compatible. This change
moves the handshake to #openConnection to prevent bypassing this logic.
Previously, we could run into a situation where attempting to delete an
index due to a cluster state update would cause an unhandled exception
to bubble up to the ClusterService and cause the cluster state applier
to fail. The result of this situation is that the cluster state never
gets updated on the ClusterService because the exception happens before
all cluster state appliers have completed and the ClusterService only
updates the cluster state once all cluster state appliers have
successfully completed.
All other methods on IndicesService properly handle all exceptions and
not just IOExceptions, but there were two instances with respect to
index deletion where only IOExceptions where handled by the
IndicesService. If any other exception occurred during these delete
operations, the exception would be bubbled up to the ClusterService,
causing the aforementioned issues.
This commit ensures all methods in IndicesService properly capture all
types of Exceptions, so that the ClusterService manages to update the
cluster state, even in the presence of shard creation/deletion failures.
Note that the lack of updating the cluster state in the presence of such
exceptions can have many unintended consequences, one of them being
the tripping of the assertion in IndicesClusterStateService#removeUnallocatedIndices
where the assumption is that if there is an IndexService to remove with
an unassigned shard, then the index must exist in the cluster state, but if
the cluster state was never updated due to the aforementioned exceptions,
then the cluster state will not have the index in question.
Currently `geo_point` and `geo_shape` field are treated as `text` field by the field stats API and we
try to extract the min/max values with MultiFields.getTerms.
This is ok in master because a `geo_point` field is always a Point field but it can cause problem in 5.x (and 2.x) because the legacy
`geo_point` are indexed as terms.
As a result the min and max are extracted and then printed in the FieldStats output using BytesRef.utf8ToString
which can throw an IndexOutOfBoundException since it's not valid UTF8 strings.
This change ensure that we never try to extract min/max information from a `geo_point` field.
It does not add a new type for geo points in the fieldstats API so we'll continue to use `text` for this kind of field.
This PR is targeted to master even though we could only commit this change to 5.x. I think it's cleaner to have it in master too before we make any decision on
https://github.com/elastic/elasticsearch/pull/21947.
Fixes#22384
This commit cleans up the comments in IndexShard related to sequence numbers, making
them uniform in their formatting and taking advantage of the line-length
limit of 140 characters.
This commit cleans up the comments in GlobalCheckpointService, making
them uniform in their formatting and taking advantage of the line-length
limit of 140 characters.
This commit cleans up the comments in SequenceNumbersService, making
them uniform in their formatting and taking advantage of the line-length
limit of 140 characters.
this commit adds full support for proxy nodes on the search layer.
This allows to connection only to a small set of nodes on a remote cluster
to exectue the search. The nodes will proxy the request to the correct node in the
cluster while the coordinting node doesn't need to be connected to the target node.
This commit cleans up the comments in LocalCheckpointService, making
them uniform in their formatting and taking advantage of the line-length
limit of 140 characters.
After deprecating getters and setters and the query DSL parameter in 5.x,
support for `minimum_number_should_match` can be removed entirely. Also
consolidated comments with the ones on 5.x branch and added an entry to the
migration docs.
Currently we have getters an setters for both "minimumNumberShouldMatch" and
"minimumShouldMatch", which both access the same internal value
(minimumShouldMatch). Since we only document the `minimum_should_match`
parameter for the query DSL, I think we can deprecate the other getters and
setters for 5.x and remove with 6.0, also deprecating the
`minimum_number_should_match` query DSL parameter.
This PR completes the refactoring of the cluster allocation explain API and improves it in the following two high-level ways:
1. The explain API now uses the same allocators that the AllocationService uses to make shard allocation decisions. Prior to this PR, the explain API would run the deciders against each node for the shard in question, but this was not executed on the same code path as the allocators, and many of the scenarios in shard allocation were not captured due to not executing through the same code paths as the allocators.
2. The APIs have changed, both on the Java and JSON level, to accurately capture the decisions made by the system. The APIs also now report on shard moving and rebalancing decisions, whereas the previous API did not report decisions for moving shards which cannot remain on their current node or rebalancing shards to form a more balanced cluster.
Note: this change affects plugin developers who may have a custom implementation of the ShardsAllocator interface. The method weighShards has been removed and no longer has any utility. In order to support the new explain API, however, a custom implementation of ShardsAllocator must now implement ShardAllocationDecision decideShardAllocation(ShardRouting shard, RoutingAllocation allocation) which provides a decision and explanation for allocating a single shard. For implementations that do not support explaining a single shard allocation via the cluster allocation explain API, this method can simply return an UnsupportedOperationException.
In #22313 we added a check that prevents the SnapshotDeletionsInProgress custom cluster state objects from being sent to older elasticsearch nodes. This commits make this check generic and available to other cluster state custom objects if needed.
Unless the dynamic templates define an explicit format in the mapping
definition: in that case the explicit mapping should have precedence.
Closes#9410
This adds a new `normalizer` property to `keyword` fields that pre-processes the
field value prior to indexing, but without altering the `_source`. Note that
only the normalization components that work on a per-character basis are
applied, so for instance stemming filters will be ignored while lowercasing or
ascii folding will be applied.
Closes#18064
Resetting a recovery consists of resetting the old recovery target and replacing it by a new recovery target object. This is done on the Cancellable threads of
the new recovery target. If the new recovery target is already cancelled before or while this happens, for example due to shard closing or recovery source
changing, we have to make sure that the old recovery target object frees all shard resources.
Relates to #22325
Recoveries are tracked on the target node using RecoveryTarget objects that are kept in a RecoveriesCollection. Each recovery has a unique id that is communicated from the recovery target to the source so that it can call back to the target and execute actions using the right recovery context. In case of a network disconnect, recoveries are retried. At the moment, the same recovery id is reused for the restarted recovery. This can lead to confusion though if the disconnect is unilateral and the recovery source continues with the recovery process. If the target reuses the same recovery id while doing a second attempt, there might be two concurrent recoveries running on the source for the same target.
This commit changes the recovery retry process to use a fresh recovery id. It also waits for the first recovery attempt to be fully finished (all resources locally freed) to further prevent concurrent access to the shard. Finally, in case of primary relocation, it also fails a second recovery attempt if the first attempt moved past the finalization step, as the relocation source can then be moved to RELOCATED state and start indexing as primary into the target shard (see TransportReplicationAction). Resetting the target shard in this state could mean that indexing is halted until the recovery retry attempt is completed and could also destroy existing documents indexed and acknowledged before the reset.
Relates to #22043
`scaled_float` should be used as DOUBLE in aggregations but currently they are used as LONG.
This change fixes this issue and adds a simple it test for it.
Fixes#22350
Before, snapshot/restore would synchronize all operations on the cluster
state except for deleting snapshots. This meant that only one
snapshot/restore operation would be allowed in the cluster at any given
time, except for deletions - there could be two or more snapshot
deletions running at the same time, or a deletion could be running,
unbeknowest to the rest of the cluster, and thus a snapshot or restore
would be allowed at the same time as the snapshot deletion was still in
progress. This could cause any number of synchronization issues,
including the situation where a snapshot that was deleted could reappear
in the index-N file, even though its data was no longer present in the
repository.
This commit introduces a new custom type to the cluster state to
represent deletions in progress. Now, another deletion cannot start if
a deletion is currently in progress. Similarily, a snapshot or restore
cannot be started if a deletion is currently in progress. In each case,
if attempting to run another snapshot/restore operation while a deletion
is in progress, a ConcurrentSnapshotExecutionException will be thrown.
This is the same exception thrown if trying to snapshot while another
snapshot is in progress, or restore while a snapshot is in progress.
Closes#19957
This commit fixes an issue with IndexShardTests#testDocStats when the
number of deleted docs is equal to the number of docs. In this case,
Luence will remove the underlying segment tripping an assertion on the
number of deleted docs.
Today we try to pull stats from index writer but we do not get a
consistent view of stats. Under heavy indexing, this inconsistency can
be very skewed indeed. In particular, it can lead to the number of
deleted docs being reported as negative and this leads to serialization
issues. Instead, we should provide a consistent view of the stats by
using an index reader.
Relates #22317
Not doing this made it difficult to establish a happens before relationship between connecting to a node and adding a listeners. Causing test code like this to fail sproadically:
```
// connection to reuse
handleA.transportService.connectToNode(handleB.node);
// install a listener to check that no new connections are made
handleA.transportService.addConnectionListener(new TransportConnectionListener() {
@Override
public void onConnectionOpened(DiscoveryNode node) {
fail("should not open any connections. got [" + node + "]");
}
});
```
relates to #22277
This commit factors out the cluster state update tasks that are published (ClusterStateUpdateTask) from those that are not (LocalClusterUpdateTask), serving as a basis for future refactorings to separate the publishing mechanism out of ClusterService.
When starting a standalone cluster, we do not able assertions. This is
problematic because it means that we miss opportunities to catch
bugs. This commit enables assertions for standalone integration tests,
and fixes a couple bugs that were uncovered by enabling these.
Relates #22334
This change is the first towards providing the ability to store
sensitive settings in elasticsearch. It adds the
`elasticsearch-keystore` tool, which allows managing a java keystore.
The keystore is loaded upon node startup in Elasticsearch, and used by
the Setting infrastructure when a setting is configured as secure.
There are a lot of caveats to this PR. The most important is it only
provides the tool and setting infrastructure for secure strings. It does
not yet provide for keystore passwords, keypairs, certificates, or even
convert any existing string settings to secure string settings. Those
will all come in follow up PRs. But this PR was already too big, so this
at least gets a basic version of the infrastructure in.
The two main things to look at. The first is the `SecureSetting` class,
which extends `Setting`, but removes the assumption for the raw value of the
setting to be a string. SecureSetting provides, for now, a single
helper, `stringSetting()` to create a SecureSetting which will return a
SecureString (which is like String, but is closeable, so that the
underlying character array can be cleared). The second is the
`KeyStoreWrapper` class, which wraps the java `KeyStore` to provide a
simpler api (we do not need the entire keystore api) and also extend
the serialized format to add metadata needed for loading the keystore
with no assumptions about keystore type (so that we can change this in
the future) as well as whether the keystore has a password (so that we
can know whether prompting is necessary when we add support for keystore
passwords).
We don't *want* to use negative numbers with `writeVLong`
so throw an exception when we try. On the other
hand unforeseen bugs might cause us to write negative numbers (some versions of Elasticsearch don't have the exception, only an assertion)
so this fixes `readVLong` so that instead of reading a wrong
value and corrupting the stream it reads the negative value.
Optimistically check for `tag` of an unknown processor for better tracking of which
processor declaration is to blame in an invalid configuration.
Closes#21429.
* Remove a checked exception, replacing it with `ParsingException`.
* Remove all Parser classes for the yaml sections, replacing them with static methods.
* Remove `ClientYamlTestFragmentParser`. Isn't used any more.
* Remove `ClientYamlTestSuiteParseContext`, replacing it with some static utility methods.
I did not rewrite the parsers using `ObjectParser` because I don't think it is worth it right now.
Currently we only apply date detection on strings that contain either `:`, `-`
or `/`. This commit inverses the heuristic in order to only apply date detection
on strings that are not parseable as a number, so that more date formats can be
used as dynamic dates formats.
Closes#1694
Today we only expose `value_type` in scriptable aggregations, however it is
also useful with unmapped fields. I suspect we never noticed because
`value_type` was not documented (fixed) and most aggregations are scriptable.
Closes#20163
`ShardCoreKeyMap.add` is called on each segment for all search requests, which
means it might become a bottleneck under a cocurrent load of cheap search
requests since this method acquires a mutex. This change proposes to use a
`ConcurrentHashMap` which allows to only take the mutex in the case that the
`LeafReader` has never been seen before.
This adds test classes that can be used to test the wire serialisation and (optionally) the XContent serialisation of objects that implement Streamable/Writeable and ToXContent.
These test classes will enable classes sich as InternalAggregation (or at least its implementations) to be tested in a consistent way when is comes to testing serialisation.
As the translog evolves towards a full operations log as part of the
sequence numbers push, there is a need for the translog to be able to
represent operations for which a sequence number was assigned, but the
operation did not mutate the index. Examples of how this can arise are
operations that fail after the sequence number is assigned, and gaps in
this history that arise when an operation is assigned a sequence number
but the operation never completed (e.g., a node crash). It is important
that these operations appear in the history so that they can be
replicated and replayed during recovery as otherwise the history will be
incomplete and local checkpoints will not be able to advance. This
commit introduces a no-op to the translog to set the stage for these
efforts.
Relates #22291
Today if an older version of a plugin exists, we fail to notify the user
with a helpful error message. This happens because during plugin
verification, we attempt to read the plugin descriptors for all existing
plugins. When an older version of a plugin is sitting on disk, we will
attempt to read this old plugin descriptor and fail due to a version
mismatch. This leads to an unhelpful error message. Instead, we should
check for existence of the plugin as part of the verification phase, but
before attempting to read plugin descriptors for existing plugins. This
enables us to provide a helpful error message to the user.
Relates #22305
The deprecation warning gives now the same message as 5.x. The deprecation warning was previously removed, but given that we are still lenient with old indices we should still output the warning.
Our `float`/`double` fields generally assume that `-0` compares less than `+0`,
except when bounds are exclusive: an exclusive lower bound on `-0` excludes
`+0` and an exclusive upper bound on `+0` excludes `-0`.
Closes#22167
The way aggregations on scripts work is by hiding scripts behind the same API
that we use for regular fields. However, there is no native support for boolean
fields, those need to be exposed as integers, with `0` standing for `false` and
`1` for true.
Relates #20941
The `UnicastZenPing` shows it's age and is the result of many small changes. The current state of affairs is confusing and is hard to reason about. This PR cleans it up (while following the same original intentions). Highlights of the changes are:
1) Clear 3 round flow - no interleaving of scheduling.
2) The previous implementation did a best effort attempt to wait for ongoing pings to be sent and completed. The pings were guaranteed to complete because each used the total ping duration as a timeout. This did make it hard to reason about the total ping duration and the flow of the code. All of this is removed now and ping should just complete within the given duration or not be counted (note that it was very handy for testing, but I move the needed sync logic to the test).
3) Because of (2) the pinging scheduling changed a bit, to give a chance for the last round to complete. We now ping at the beginning, 1/3 and 2/3 of the duration.
4) To offset for (3) a bit, incoming ping requests are now added to on going ping collections.
5) UnicastZenPing never establishes full blown connections (but does reuse them if there). Relates to #22120
6) Discovery host providers are only used once per pinging round. Closes#21739
7) Usage of the ability to open a connection without connecting to a node ( #22194 ) and shorter connection timeouts helps with connections piling up. Closes#19370
8) Beefed up testing and sped them up.
9) removed light profile from production code
This adds fromXContent method and unit test for sort values that are part of
InternalSearchHit. In order to centralize serialisation and xContent parsing and
rendering code, move all relevant parts to a new class which can be unit tested
much better in isolation.This is part of the preparation for parsing search
responses on the client side.
Sending a request is not a good indicator as it doesn't mean it's processed yet. Instead we should use one of the first request from source to target.
This caused the cluster state block to be added to early , blocking the recovery it self
The allocation decider explanation messages where improved in #21771 to
include the specific Elasticsearch setting that contributed to the
decision taken by the decider. This commit improves upon the
explanation message output by including whether the setting was an index
level setting or a cluster level setting. This will further help the
user understand and locate the setting that is the cause of shards
remaining unassigned or remaining on their current node.
Introduces `XContentParser#namedObject which works a little like
`StreamInput#readNamedWriteable`: on startup components register
parsers under names and a superclass. At runtime we look up the
parser and call it to parse the object.
Right now the parsers take a context object they use to help with
the parsing but I hope to be able to eliminate the need for this
context as most what it is used for at this point is to move
around parser registries which should be replaced by this method
eventually. I make no effort to do so in this PR because it is
big enough already. This is meant to the a start down a road that
allows us to remove classes like `QueryParseContext`,
`AggregatorParsers`, `IndicesQueriesRegistry`, and
`ParseFieldRegistry`.
The goal here is to reduce the amount of plumbing required to
allow parsing pluggable things. With this you don't have to pass
registries all over the place. Instead you must pass a super
registry to fewer places and use it to wrap the reader. This is
the same tradeoff that we use for NamedWriteable and it allows
much, much simpler binary serialization. We think we want that
same thing for xcontent serialization.
The only parsing actually converted to this method is parsing
`ScoreFunctions` inside of `FunctionScoreQuery`. I chose this
because it is relatively self contained.
ClusterStateObserver is a utility class that simplifies interacting with the cluster state in cases where an action takes a decision based on the current cluster state but may want to wait for a new state and retry upon failure. The ClusterStateObserver implements its functionality by keeping a reference to the last cluster state that it observed. When a new ClusterStateObserver is created, it samples a cluster state from the cluster service which is subsequently used for change detection. If actions take a long time to process, however, the cluster observer can reference very old cluster states. Due to cluster observers being created very frequently and cluster states being potentially large the referenced cluster states can waste a lot of heap space. A specific example where this can make a node go out of memory is given in point 2 of issue #21568: The action listener in TransportMasterNodeAction.AsyncSingleAction has a ClusterStateObserver to coordinate the retry mechanism if the action on the master node fails due to the node not being master anymore. The ClusterStateObserver in AsyncSingleAction keeps a reference to the full cluster state when the action was initiated. If the pending tasks queue grows quite large and has older items in it lots of cluster states can possibly be referenced.
This commit changes the ClusterStateObserver to hold only onto the part of the cluster state that's needed for change detection.
This changes the class from extending the abstract class to implementing the
ToXContent interface only. The former could lead to unexpected behaviour when
trying to display the object, since the "toString()" method inherited from
ToXContentToBytes would create an error message because the SuggestionBuilders
toXContent() methods don't render complete json objects.
* Internal: Refactor SettingCommand into EnvironmentAwareCommand
This change renames and changes the behavior of SettingCommand to have
its primary method take in a fully initialized Environment for
elasticsearch instead of just a map of settings. All of the subclasses
of SettingCommand already did this at some point, so this just removes
duplication.
We are currenlty checking that no deprecation warnings are emitted in our query tests. That can be moved to ESTestCase (disabled in ESIntegTestCase) as it allows us to easily catch where our tests use deprecated features and assert on the expected warnings.
We return deprecation warnings as response headers, besides logging them. Strict parsing mode stayed around, but was only used in query tests, though we also introduced checks for deprecation warnings there that don't need strict parsing anymore (see #20993).
We can then safely remove support for strict parsing mode. The final goal is to remove the ParseFieldMatcher class, but there are many many users of it. This commit prepares the field for the removal, by deprecating ParseFieldMatcher and making it effectively not needed. Strict parsing is removed from ParseFieldMatcher, and strict parsing is replaced in tests where needed with deprecation warnings checks.
Note that the setting to enable strict parsing was never ported to the new settings infra hance it cannot be set in production. It is really only used in our own tests.
Relates to #19552
Rename the method to assertToXContentEquivalent to highlight that it's tailored to ToXContent comparisons.
Rather than parsing into a map and replacing byte[] in both those maps, add custom equality assertions that recursively walk maps and lists and call Arrays.equals whenever a byte[] is encountered.
Moved field values `toXContent` logic to `GetField` (from `GetResult`), which outputs its own fields, and can also parse them now. Also added `fromXContent` to `GetResult` and `GetResponse`.
The start object and end object for `GetResponse` output have been moved to `GetResult#toXContent`, from the corresponding rest action. This makes it possible to have `toXContent` and `fromXContent` completely symmetric, as parsing requires looping till an end object is found which is weird when the corresponding `toXContent` doesn't print that out.
This also introduces the foundation for testing retrieval of _source and stored field values.
This commit makes mapping updates atomic when multiple types in an index are updated. Mappings for an index are now applied in a single atomic operation, which also allows to optimize some of the cross-type updates and checks.
Subclasses of TransportReplicationAction can currently chose to implement block levels for which the request will be blocked.
- Refresh/Flush was using the block level METADATA_WRITE although they don't operate at the cluster meta data level (but more like shard level meta data which is not represented in the block levels). Their level has been changed to null so that they can operate freely in the presence of blocks.
- GlobChkptSync was using WRITE although it does not make any changes to the actual documents of a shard. The level has been changed to null so that it can operate freely in the presence of blocks.
The commit also adds a check for closed indices in TRA so that the right exception is thrown if refresh/flush/checkpoint syncing is attempted on a closed index (before it was throwing an IndexNotFoundException, now it's throwing IndexClosedException).
Sequence BWC logic consists of two elements:
1) Wire level BWC using stream versions.
2) A changed to the global checkpoint maintenance semantics.
For the sequence number infra to work with a mixed version clusters, we have to consider situation where the primary is on an old node and replicas are on new ones (i.e., the replicas will receive operations without seq#) and also the reverse (i.e., the primary sends operations to a replica but the replica can't process the seq# and respond with local checkpoint). An new primary with an old replica is a rare because we do not allow a replica to recover from a new primary. However, it can occur if the old primary failed and a new replica was promoted or during primary relocation where the source primary is treated as a replica until the master starts the target.
1) Old Primary & New Replica - this case is easy as is taken care of by the wire level BWC. All incoming requests will have their seq# set to `UNASSIGNED_SEQ_NO`, which doesn't confuse the local checkpoint logic (keeping it at `NO_OPS_PERFORMED`)
2) New Primary & Old replica - this one is trickier as the global checkpoint service currently takes all in sync replicas into consideration for the global checkpoint calculation. In order to deal with old replicas, we change the semantics to say all *new node* in sync replicas. That means the replicas on old nodes don't count for the global checkpointing. In this state the seq# infra is not fully operational (you can't search on it, because copies may miss it) but it is maintained on shards that can support it. The old replicas will have to go through a file based recovery at some point and will get the seq# information at that point. There is still an edge case where a new primary fails and an old replica takes over. I'lll discuss this one with @ywelsch as I prefer to avoid it completely.
This PR also re-enables the BWC tests which were disabled. As such it had to fix any BWC issue that had crept in. Most notably an issue with the removal of the `timestamp` field in #21670.
The commit also includes a fix for the default value of the seq number field in replicated write requests (it was 0 but should be -2), that surface some other minor bugs which are fixed as well.
Last - I added some debugging tools like more sane node names and forcing replication request to implement a `toString`
This commit exposes public getters for the aggregations in
AggregatorFactories.Builder. The reason is that it allows to
parse the aggregation object from elsewhere (e.g. a plugin) and then
be able to get the aggregation builders in order to set them in
a SearchSourceBuilder.
The alternative would have been to expose a setter for the
AggregatorFactories.Builder object. But that would be making
the API a bit trappy.
Today if a settings object has many keys ie. if somebody specifies
a gazillion synonym in-line (arrays are keys ending with ordinals) operations like
`Settings#getByPrefix` have a linear runtime. This can cause index creations to be
very slow producing lots of garbage at the same time. Yet, `Settings#getByPrefix` is called
quite frequently by group settings etc. which can cause heavy load on the system.
While it's not recommended to have synonym lists with 25k entries in-line these use-cases should
not have such a large impact on the cluster / node. This change introduces a view-like map
that filters based on the prefixes referencing the actual source map instead of copying all values
over and over again. A benchmark that adds a single key with 25k random synonyms between 2 and 5 chars
takes 16 seconds to get the synonym prefix 200 times while the filtered view takes 4 ms for the 200 iterations.
This relates to https://discuss.elastic.co/t/200-cpu-elasticsearch-5-index-creation-very-slow-with-a-huge-synonyms-list/69052
In some cases, it might happen that the `_all` field gets a field type that is
not totally configured, and in particular lacks analyzers. This is due to the
fact that `AllFieldMapper.TypeParser.getDefault` uses `Defaults.FIELD_TYPE` as
a default field type, which does not have any analyzers configured since it
does not know about the default analyzers.
With this commit we enable the Jackson feature 'STRICT_DUPLICATE_DETECTION'
by default for all XContent types (not only JSON).
We have also changed the name of the system property to disable this feature
from `es.json.strict_duplicate_detection` to the now more appropriate name
`es.xcontent.strict_duplicate_detection`.
Relates elastic/elasticsearch#19614
Relates elastic/elasticsearch#22073
With this commit we change the data type of the 'TIMESTAMP'
meta-data field from a formatted date string to a plain
`java.util.Date` instance. The main reason for this change is
that our benchmarks have indicated that this contributes
significantly to the time spent in the ingest pipeline.
The overhead in terms of indexing throughput of the ingest
pipeline is about 15% and breaks down roughly as follows:
* 5% overhead caused by the conversion from `XContent` -> `Map`
* 5% overhead caused by the timestamp formatting
* 5% overhead caused by the conversion `Map` -> `XContent`
Relates #22074
In #22094 we introduce a test-only setting to simulate transport
impls that don't support handshakes. This commit implements the same logic
without a setting.
This commit touches addresses issues related to recovery and sequence numbers:
- A sequence number can be assigned and a Lucene commit created with a
maximum sequence number at least as large as that sequence number,
yet the operation corresponding to that sequence number can be
missing from both the Lucene commit and the translog. This means that
upon recovery the local checkpoint will be stuck at or below this
missing sequence number. To address this, we force the local
checkpoint to the maximum sequence number in the Lucene commit when
opening the engine. Note that there can still be gaps in the history
in the translog but we do not address those here.
- The global checkpoint is transferred to the target shard at the end
of peer recovery.
- Additionally, we reenable the relocation integration tests.
Lastly, this work uncovered some bugs in the assignment of sequence
numbers on replica operations:
- setting the sequence number on replica write requests was missing,
very likely introduced as a result of resolving merge conflicts
- handling operations that arrive out of order on a replica and have a
version conflict with a previous operation were never marked as
processed
Relates #22212
Some expert users like UnicastZenPing today establishes real connections to nodes during it's ping
phase that can be used by other parts of the system. Yet, this is potentially dangerous
and undesirable unless the nodes have been fully verified and should be connected to in the
case of a cluster state update or if we join a newly elected master. For use-cases like this, this change adds the infrastructure to manually handle connections that are not publicly available on the node ie. should not be managed by `Transport`/`TransportSerivce`
Some of our stats serialization code duplicates complicated seriazliation logic
or could use existing building blocks from StreamOutput/Input. This commit
cleans up some of the serialization code.
Today in the codebase we refer to seccomp everywhere instead of system
call filter even if we are not specifically referring to Linux. This
commit is a purely mechanical change to refer to system call filter
where appropriate instead of the general seccomp, and only leaves
seccomp in place when actually referring to the Linux implementation.
Relates #22243
We try to install a system call filter on various operating systems
(Linux, macOS, BSD, Solaris, and Windows) but the setting
(bootstrap.seccomp) to control this is named after the Linux
implementation (seccomp). This commit replaces this setting with
bootstrap.system_call_filter. For backwards compatibility reasons, we
fallback to bootstrap.seccomp and log a deprecation message if
bootstrap.seccomp is set. We intend to remove this fallback in
6.0.0. Note that now is the time to make this change it's likely that
most users are not making this setting anyway as prior to version 5.2.0
(currently unreleased) it was not necessary to configure anything to
enable a node to start up if the system call filter failed to install
(we marched on anyway) but starting in 5.2.0 it will be necessary in
this case.
Relates #22226
With recent changes to our parsing code we have drastically reduced the places where we auto-detect the content type from the input. The usage of these methods spread in our codebase for no reason, given that in most of the cases we know the content type upfront and we don't need any auto-detection mechanism. Deprecating these methods is a way to try and make sure that these methods are carefully used, and hopefully not introduced in newly written code.
We have yet to fix the REST layer to read the Content-Type header, which is the long term solution, but for now we just want to make sure that the usage of these methods doesn't spread any further.
Relates to #19388
In #20305, _suggest endpoint was deprecated
in favour of using _search endpoint. This
commit removes the dedicated _suggest endpoint
entirely from master.
Depending on how the connection is closed the `#onChannelClosed` callback
might be invoked more than once or the handler has been processed by the response
of the handshake already. This commit only notifies the handler if was removed from
the pending map.
Sends the `error_trace` parameter with all requests sent by the
yaml test framework, including the doc snippet tests. This can be
overridden by settings `error_trace: false`. While this drift's
core's handling of the yaml tests from the client's slightly this
should only be a problem for tests that rely on the default value,
both of which I've fixed by setting the value explicitly.
This also escapes `\n` and `\t` in the `Stash dump on failure` so
the `stack_trace` is more readable.
Also fixes `RestUpdateSettingsAction` to not think of the `error_trace`
parameter as a setting.
`ClusterService` is responsible of updating the cluster state on every node (as a response to an API call on the master and when non-masters receive a new state from the master). When a new cluster state is processed, it is made visible via the `ClusterService#state` method and is sent to series of listeners. Those listeners come in two flavours - one is to change the state of the node in response to the new cluster state (call these cluster state appliers), the other is to start a secondary process. Examples for the later include an indexing operation waiting for a shard to be started or a master node action waiting for a master to be elected.
The fact that we expose the state before applying it means that samplers of the cluster state had to worry about two things - working based on a stale CS and working based on a future, i.e., "being applied" CS. The `ClusterStateStatus` was used to allow distinguishing between the two. Working with a stale cluster state is not avoidable. How this PR changes things to make sure consumers don't need to worry about future CS, removing the need for the status and simplifying the waiting logic.
This change does come with a price as "cluster state appliers" can't sample the cluster state from `ClusterService` whenever they want as the cluster state isn't exposed yet. However, recent clean ups made this is situation easier and this PR takes the last steps to remove such sampling. This also helps clarify the "information flow" and helps component separation (and thus potential unit testing). It also adds an assertion that will trigger if the cluster state is sampled by such listeners.
Note that there are still many "appliers" that could be made a simpler, unrestricted "listener" but this can be done in smaller bits in the future. The commit also makes it clear what the `appliers` and what the `listeners` are by using dedicated interfaces.
Also, since I had to change the listener types I went ahead and changed the data structure for temporary/timeout listeners (used for the observer) so addition and removal won't be an O(n) operation.
This commit addresses an issue in the stats APIs where
include_segment_file_sizes was not being consumed leading to requests
containing this parameter being rejected.
Relates #21879
Since #22094 has been back-ported to 5.2 we can remove all BWC layers from master since all supported version will handle handshake requests.
Relates to #22094
Today sending a message on a closed channel doesn't throw an exception. The channel
might just swallow the exception and informs the internal async exception handler
that a channel got disconnected. This change adds a safety check that we fail
the handshake if we registered a handler but the channel has been closed already
for instance due to a reset by peer.
Merging mappings ensures that fields are used consistently across mapping types. Disabling norms for a specific field in one mapping type for example also disables norms for the same field in other mapping types of that index. The logic that ensures this while merging mappings currently always creates a fresh document mapper for all existing mapping types, even if no change occurred. Creating such a fresh document mapper does not come for free though as it involves recompressing the source. Making a mapping change to one type of an index with 100 types will thus re-serialize and recompress all 100 types, independent of any changes made to those types.
This commit fixes the update logic to only create a new DocumentMapper if a field type actually changes.
2. remove Created by declaration
3. fix typo method name from testExceptionForCopyToInMultiFields to testExceptionForIncludeInAllInMultiFields
4. fix typo method name from createMappinmgWithIncludeInAllInMultiField to createMappingWithIncludeInAllInMultiField
5. use expectThrows rather than try catch according to nik9000's comments
* Replace _suggest endpoint to _search in docs
In 5.0, the _suggest endpoint is just sugar for _search
with suggestions specified. Users should move away from
using the _suggest endpoint, as it is marked as deprecated in 5.x and
will be removed in 6.0
* update docs to use _search endpoint instead of _suggest
* Add deprecation logging to RestSuggestAction
* Use search endpoint instead of suggest endpoint in rest tests
Low level handshake code doesn't handle situations gracefully if the connection
is concurrently closed or reset by peer. This commit adds the relevant code to
fail the handshake if the connection is closed.
Moves the last of the "easy" parser construction into
`RestRequest`, this time with a new method
`RestRequest#contentParser`. The rest of the production
code that builds `XContentParser` isn't "easy" because it is
exposed in the Transport Client API (a Builder) object.
In order to start clusters with min master nodes set without setting `discovery.initial_state_timeout`, #21846 has changed the way we start nodes. Instead to the previous serial start up, we now always start the nodes in an async fashion (internally). This means that starting a cluster is unsafe without `min_master_nodes` being set. We should therefore make it mandatory.
ElasticsearchException is used in various response objects like IndexResponse, DeleteResponse or BulkItemResponse.Failure. It would be helpful to the High Level Rest Client to be able to parse these exceptions back.
This commit adds the fromXContent() method to the ElasticsearchException object. This method does not return the original (wrapped or unwrapped) exception but always returns a ElasticsearchException that serves as a simple POJO for all types of exceptions. The parsed ElasticsearchException's message will be composed of the original exception type (ex: illegal_argument_exception) concatenated with the original reason to help users/clients to known and handle the error.
PR #22049 changed the node update logic to never remove nodes from the cluster state when the cluster state is not published. This led to an issue electing a master (#22120) based on nodes with same transport address (but different node id) as previous nodes. The joining nodes should take precedence over conflicting ones. Note that this only applies to the action of becoming master. If a master is established and a node joins an existing master, it will be rejected if there is another node with same transport address.
For minDocCount=0 the numeric terms aggregator should also check the includes/excludes when buckets with empty count are added to the result.
This change fixes this bug and adds a test for it.
Fixes#22140
The creation of the `ValuesSource` used to pass `DateTimeZone.UTC` as a time
zone all the time in case of empty fields in spite of the fact that all doc
value formats but the date one reject this parameter.
This commit centralizes the creation of the `ValuesSource` and adds unit tests
to it.
Closes#22009
With this commit we enable the Jackson feature 'STRICT_DUPLICATE_DETECTION'
by default. This ensures that JSON keys are always unique. While this has
a performance impact, benchmarking has indicated that the typical drop in
indexing throughput is around 1 - 2%.
As a last resort, we allow users to still disable strict duplicate checks
by setting `-Des.json.strict_duplicate_detection=false` which is
intentionally undocumented.
Closes#19614
Today we write 0x00 or 0x01 for false or true when serializing a boolean
(and 0x02 for null when serializing an optional boolean) but we
deserialize any non-zero byte to true (except when deserializing an
optional boolean in which case we deserialize 0x02 to null, 0x01 to
true, and any other non-zero byte to false). This too easily allows
corruption into the stream. Instead, we should mark the stream as
corrupted and stop deserializing. This catches when we try to
deserialize something as a boolean that is not a boolean.
Relates #22152
This commit enables CLI commands to be closeable and installs a runtime
shutdown hook to ensure that if the JVM shuts down (as opposed to
aborting) the close method is called.
It is not enough to wrap uses of commands in main methods in
try-with-resources blocks as these will not run if, say, the virtual
machine is terminated in response to SIGINT, or system shutdown event.
Relates #22126
This commit fixes a for loop that reverses the order of shard stats
coming off the wire, and is really hard to read anyway (with the
post-increment in the loop initializer).
Relates #22150
Today we rely on the version that the API user passes in together with the DiscoveryNode. This commit introduces a low level handshake where nodes exchange their version to be used with the transport protocol that is executed every time a connection to a node is established. This, on the one hand allows to change the wire protocol based on the version we are talking to even without a full cluster restart. Today we would need to carry on a BWC layer across major versions but with a handshake we can rely on the fact that the latest version of the previous minor executes a handshake and uses the latest protocol version across all communication with the N+1 version nodes.
This change is yet fully backwards compatible, a followup PR will remove the BWC in 6.0 once this has been back-ported to the 5.x branch
Starts to centralize creation of the `XContentParser` in
`protected final` methods on `ESTestCase`. The idea is to enable
adding `NamedXContentRegistry` relatively easily by giving tests
a single place they can override to define the
`NamedXContentRegistry`. Since `NamedXContentRegistry` doesn't
exist yet neither does the override point.
This doesn't attempt to migrate all the tests to calling the
new methods to build the parsers. I wanted to make this so we
could review the concept and then I'll merge a followup to
migrate the tests.
This class is just a wrapper around `SearchContext`, so let's use
`SearchContext` directly. The change is mechanical, except the
`ValuesSourceConfig` class, where I moved the logic to get a `ValuesSource`
given a config.
When using dynamic templates, ES will now throw an exception if a
`match_mapping_type` is used that doesn't correspond to an actual type.
Relates to #17285
Plugins also have the need to provide better OOTB experience by configuring
defaults unless the plugin is used in _production_ mode. This change exposes
the bootstrap check infrastructure as part of the plugin API to allow plugins
to specify / install their own bootstrap checks if necessary.
Our query DSL supports empty queries (`{}`), which have a different meaning depending on the query that holds it, either ignored, match_all or match_none. We deprecated the support for empty queries in 5.0, where we log a deprecation warning wherever they are used.
The way we supported it once we moved query parsing to the coordinating node was having an Optional<QueryBuilder> return type in all of our parse methods (called fromXContent). See #17624. The central place for this was QueryParseContext#parseInnerQueryBuilder. We can now remove all the optional return types and simply throw an exception whenever an empty query is found.
When we decided to deprecate and remove fuzzy query in #15760, we didn't realize we would take away the possibililty for uses to use a fuzzy query as part of a span query, which is not possible using match query. This means we have to go back and un-deprecate fuzzy query, which will not be removed.
Closes#15760
Queries must be rewritten before the query phase executes otherwise non-executable queries like `wrapper` query or `terms` will fail or queries that require resources like script service can't access these service unless rewritten.
Relates to #21303
This change allows specifying alias/wildcard expression in indices_boost.
And added another format for specifying indices_boost. It accepts array of index name and boost pair.
If an index is included in multiple aliases/wildcard expressions, the first match will be used.
With new format, old format is marked as deprecated.
Closes#4756
`include` / `exclude` in terms / sig-terms aggs seems completely broken
and massively untested. This commit makes the TermsTests pass again that
randomly use `include` / `exclude`. This class must be tested individually
and we need real integ tests that use xcontent that use this feature.
An earlier commit removed BWC for pre-5.0 snapshots, which also meant removing the capability to load pre-5.0 snapshots. In 6.0, such snapshots are now
invisible and must be treated by the BWC tests in that way.
URLBlobContainer can in certain situations throw a FileNotFoundException. To fulfill the contract of the readBlob method it should throw a NoSuchFileException instead when the given blob cannot be found.
Today we connect and publish the nodes connection before we execute a
handshake with the node we connect to. In the case of connecting to a node
that won't pass the handshake this connection is already `published` and other
code paths can use it. This commit detaches the connection and the publish of the
connection such that `TransportService` can do a handshake before actually connect
and publish the connection.
To get #22003 in cleanly we need to centralize as much `XContentParser` creation as possible into `RestRequest`. That'll mean we have to plumb the `NamedXContentRegistry` into fewer places.
This removes `RestAction.hasBody`, `RestAction.guessBodyContentType`, and `RestActions.getRestContent`, moving callers over to `RestRequest.hasContentOrSourceParam`, `RestRequest.contentOrSourceParam`, and `RestRequest.contentOrSourceParamParser` and `RestRequest.withContentOrSourceParamParserOrNull`. The idea is to use `withContentOrSourceParamParserOrNull` if you need to handle requests without any sort of body content and to use `contentOrSourceParamParser` otherwise.
I believe the vast majority of this PR to be purely mechanical but I know I've made the following behavioral change (I'll add more if I think of more):
* If you make a request to an endpoint that requires a request body and has cut over to the new APIs instead of getting `Failed to derive xcontent` you'll get `Body required`.
* Template parsing is now non-strict by default. This is important because we need to be able to deprecate things without requests failing.
Improves the error message returned when looking up a task that
belongs to a node that is no longer part of the cluster. The new
error message tells the user that the node isn't part of the cluster.
This is useful because if you start a task and the node goes down
there isn't a record of the task at all. This hints to the user that
the task might have died with the node.
Relates to #22027
In 5.0, the search slow log switched to the multi-line format with no option to get back to the origin single-line format that was used prior to 5.0 by default. This commit removes the reformat option from the search slow log and returns the search slow log back to the single-line format.
Closes#21711
A shard that is locally marked as relocated, but where the relocation target shard has not been activated yet by the master, can still receive index operations, which in return can lead to flushes being triggered. Flushing is currently (wrongly) prohibited on shards marked as relocated, which makes the flushing process go into an endless retry loop and log warnings until the shard is closed. This commit fixes this situation by allowing flush, force_merge and upgrade operations to run on shards that are marked as relocated.
If you make a mistake and specify a mapping like:
```
{
"parent": {
"properties": {}
},
"child": {
"_parent": "parent",
"properties": {}
}
}
```
then the error message you get back amounts to
`Failed to parse mapping for [child]: can't cast a String to a Map`.
Since it doens't tell you *which* string can't be cast to a map you
have to dig through the stack trace to figure out what to fix. This
replaces the error message with:
```
Failed to parse mapping [child]: [_parent] must be an object containing [type]
```
so you can tell that the problem is with the `parent` field.
This adds a fromXContent method and unit test to InternalNestedIdentity so we can parse it as part of a search response. This is part of the preparation for parsing search responses on the client side.
Fixes an issue where indexing requests with operation type "create" auto-convert external versioning to internal versioning and silently ignore the version number instead of failing with an error message.
This is an attempt to start moving aggs parsing to `ObjectParser`. There is
still A LOT to do, but ObjectParser is way better than the way aggregations
parsing works today. For instance in most cases, we reject numbers that are
provided as strings, which we are supposed to accept since some client languages
(looking at you Perl) cannot make sure to use the appropriate types.
Relates to #22009
* Remove 2.0 prerelease version constants
This is a start to addressing #21887. This removes:
* pre 2.0 snapshot format support
* automatic units addition to cluster settings
* bwc check for delete by query in pre 2.0 indexes
This adds the `_primary_term` field internally to the mappings. This field is
populated with the current shard's primary term.
It is intended to be used for collision resolution when two document copies have
the same sequence id, therefore, doc_values for the field are stored but the
filed itself is not indexed.
This also fixes the `_seq_no` field so that doc_values are retrievable (they
were previously stored but irretrievable) and changes the `stats` implementation
to more efficiently use the points API to retrieve the min/max instead of
iterating on each doc_value value. Additionally, even though we intend to be
able to search on the field, it was previously not searchable. This commit makes
it searchable.
There is no user-visible `_primary_term` field. Instead, the fields are
updated by calling:
```java
index.parsedDoc().updateSeqID(seqNum, primaryTerm);
```
This includes example methods in `Versions` and `Engine` for retrieving the
sequence id values from the index (see `Engine.getSequenceID`) that are only
used in unit tests. These will be extended/replaced by actual implementations
once we make use of sequence numbers as a conflict resolution measure.
Relates to #10708
Supercedes #21480
P.S. As a side effect of this commit, `SlowCompositeReaderWrapper` cannot be
used for documents that contain `_seq_no` because it is a Point value and SCRW
cannot wrap documents with points, so the tests have been updated to loop
through the `LeafReaderContext`s now instead.
Before, it was possible that the SameShardAllocationDecider would allow
force allocation of an unassigned primary to the same node on which an
active replica is assigned. This could only happen with shadow replica
indices, because when a shadow replica primary fails, the replica gets
promoted to primary but in the INITIALIZED state, not in the STARTED
state (because the engine has specific reinitialization that must take
place in the case of shadow replicas). Therefore, if the now promoted
primary that is initializing fails also, the primary will be in the
unassigned state, because replica to primary promotion only happens when
the failed shard was in the started state. The now unassigned primary
shard will go through the allocation deciders, where the
SameShardsAllocationDecider would return a NO decision, but would still
permit force allocation on the primary if all deciders returned NO.
This commit implements canForceAllocatePrimary on the
SameShardAllocationDecider, which ensures that a primary cannot be
force allocated to the same node on which an active replica already
exists.
the ReplicaShardAllocator, when in explain mode, would get the
node decisions for all nodes in the cluster. The PrimaryShardAllocator
neglected to do this and tried to use the shard fetch data in explain
mode, which had not yet been fully fetched. This commit fixes this by
ensuring the PrimaryShardAllocator gets node decisions in the same way
the ReplicaShardAllocator does in explain mode, if shard data is still
being fetched.
This commit enhances the allocator decision result objects (namely,
AllocateUnassignedDecision, MoveDecision, and RebalanceDecision)
to enable them to be used directly by the cluster allocation explain API. In
particular, this commit does the following:
- Adds serialization and toXContent methods to the response objects,
which will form the explain API responses.
- Moves the calculation of the final explanation to the response
object itself, removing it from the responsibility of the allocators.
- Adds shard store information to the NodeAllocationResult, so that
store information is available for each node, when explaining a
shard allocation by the PrimaryShardAllocator or the ReplicaShardAllocator.
- Removes RebalanceDecision in favor of using MoveDecision for both
moving and rebalancing shards.
- Removes NodeRebalanceResult in favor of using NodeAllocationResult.
- Changes the notion of weight ranking to be relative to the current node,
instead of an absolute weight that doesn't convey any added value to the
API user and can be confusing.
- Introduces a new enum AllocationDecision to convey the decision type,
which enables conveying unassigned, moving, and rebalancing scenarios
with more detail as opposed to just Decision.Type and AllocationStatus.
* Ingest: Moved ingest invocation into index/bulk actions
Ingest was originally setup as a plugin, and in order to hook into the
index and bulk actions, action filters were used. However, ingest was
later moved into core, but the action filters were never removed. This
change moves the execution of ingest into the index and bulk actions.
* Address PR comments
* Remove forwarder direct dependency on ClusterService
This adds a fromXContent method and unit test to the HighlightField class so we
can parse it as part of a serch response. This is part of the preparation for
parsing search responses on the client side.
Failing an initializing primary when shadow replicas are enabled for the index can leave the primary unassigned with replicas being active. Instead, a replica should be promoted to primary, which is fixed by this commit.
This commit makes two changes to how the in-sync allocations set is updated:
- the set is only trimmed when it grows. This prevents trimming too eagerly when the number of replicas was decreased while shards were unassigned.
- the allocation id of an active primary that failed is only removed from the in-sync set if another replica gets promoted to primary. This prevents the situation where the only available shard copy in the cluster gets removed the in-sync set.
Closes#21719
We had tests for the regular factories, but not for the pre-built ones, that
ship by default without requiring users to define them in the analysis settings.
Currently we expose the internal representation that we use for ip addresses,
which are the ipv6 bytes. However, this is not really usable, exposes internal
implementation details and also does not work fine with other APIs that expect
that the values can be `toString`'d.
Closes#21977
Performance testing by @danielmitterdorfer revealed single
index/delete operations have similar performance (indexing
throughput) to equivalent single item bulk request.
This PR reduces the code paths to executing single write
operations, by reusing the logic in (shard) bulk action for
executing single operation as a single-item bulk request.
When you submit a _termvectors request for an artificial document and
specify the 'preference' parameter to send the request to a particular
shard, the request sometimes hits NPE. Fix this case by ignoring the
auto-generated artificial document ID and pick a shard per the
preference parameter, or a random shard.
This closes#21928
* Include unindexed field in FieldStats response
This change adds non-searchable fields to the FieldStats response. These fields do not have min/max informations but they can be aggregatable. Fields that are only stored in _source (store:no, index:no, doc_values:no) will still be missing since they do not have any useful information to show. Indices and clients must be at least on V_5_2_0 to see this change.
Since the removal of local discovery of #https://github.com/elastic/elasticsearch/pull/20960 we rely on minimum master nodes to be set in our test cluster. The settings is automatically managed by the cluster (by default) but current management doesn't work with concurrent single node async starting. On the other hand, with `MockZenPing` and the `discovery.initial_state_timeout` set to `0s` node starting and joining is very fast making async starting an unneeded complexity. Test that still need async starting could, in theory, still do so themselves via background threads.
Note that this change also removes the usage of `INITIAL_STATE_TIMEOUT_SETTINGS` as the starting of nodes is done concurrently (but building them is sequential)
With this commit we document that ingest processors need to be
thread-safe. Previously this could be inferred from reading the
source code but we got several user questions about this so
it is stated explicitly in the Javadocs of Processor now.
Action filters currently have the ability to filter both the request and
response. But the response side was not actually used. This change
removes support for filtering responses with action filters.
The RecoveryFailedException's output prints the source and
target nodes for the recovery. However, sometimes there is
no source node for the recovery, only a target node (such as
when recovering a primary shard from disk). In this case,
we don't want to display the source node. This commit fixes
this by displaying "Recovery failed on target node.." instead
of "Recovery failed from null to target node" which is what the
output currently displays.
This commit increases the test logging on the unicast zeng ping test of
simple pings to gather more info for chasing a race condition that is
happening in this test.
Sadly, the timeouts here need to be increased to reduce the likelihood
of spurious test failures (test hosts under load are especially prone to
this). This does slow down this test suite a bit, but it's still not as
slow as it was before this endeavor of lowering these timeouts started.
This commit cleans up the unicast zen ping unknown hosts cached test:
- send pings from the same node to more clearly indicate DNS lookups
are not cached (within the same UnicastZenPing instance)
- increase ping and wait timeout to 500ms to address race conditions
(on a test host under load, the timeout was too short for the
connect/handshake/ping cycle to complete)
The port limit test is a simple test that fakes that resolving an
address with a port range results the correct address collection. This
test is subject to a race condition where the timeout on the resolve
request can fire before the resolve code finishes executing (this race
is exceptionally rare, because there are not actually any DNS lookups
being done here since we are just resolving addresses). This commit
increases the timeout here to significantly reduce the chance of a
losing race causing a spurious test failure. This increased timeout
should not increase the runtime of the test, just make failures less
likely.
The unknown hosts test is a simple test that fakes that resolving an
address results in an unknown host exception. The main purpose of this
test is to ensure that we log (and do not silently drop) when a host
fails to resolve. This test is subject to a race condition where the
timeout on the resolve request can fire before the resolve code finishes
executing (this race is exceptionally rare, because there are not
actually any DNS lookups being done here, just a mock resolve
implementation that throws an exception and that's where losing the race
can arise). This commit increases the timeout here to significantly
reduce the chance of a losing race causing a spurious test failure. This
increased timeout should not increase the runtime of the test, just make
failures less likely.
This commit renames InternalEngine#loadSeqNoStatsLucene to
InternalEngine#loadSeqNoStatsFromLucene to make this name consistent
with the method InternalEngine#loadSeqNoStatsFromLuceneAndTranslog.
* Plugins: Replace Rest filters with RestHandler wrapper
RestFilters are a complex way of allowing plugins to add extra code
before rest actions are executed. This change removes rest filters, and
replaces with a wrapper which a single plugin may provide.
Today when starting a new engine, we read the global checkpoint from the
translog only if we are opening an existing translog. This commit
clarifies this situation by distinguishing the three cases of engine
creation in the constructor leading to clearer code.
Relates #21934
Today if system call filters fail to install on startup, we log a
message but otherwise march on. This might leave users without system
call filters installed not knowing that they have implicitly accepted
the additional risk. We should not be lenient like this, instead clearly
informing the user that they have to either fix their configuration or
accept the risk of not having system call filters installed. This commit
adds a bootstrap check that if system call filters are enabled, they
must successfully install.
Relates #21940
In #21828, serialization of the host string was added to preserve this information when
a TransportAddress gets serialized. However, there is still a case where this did not always
work. In UnicastZenPings, DiscoveryNode instances are created for the ping hosts with the
minimum compatibility version, which is currently less than the version required to preserve
the host information. This means that when a node is received from a PingResponse that the
host information is no longer set correctly on the InetSocketAddress contained in the
DiscoveryNode.
This commit adds a workaround for this situation by allowing the host string to be passed
into the TransportAddress constructor that takes a StreamInput and using that as the host
for the InetAddress that is created during deserialization.
If you ask for the term vectors of an artificial document with
term_statistics=true, but a shard does not have any terms of the doc's
field(s), it returns the doc's term vectors values as the shard-level
term statistics. This commit fixes that to return 0 for `ttf` and also
field-level aggregated statistics.
Closes#21906
We don't use the test infra nor do we run the tests. They might all be
entirely out of date. We also have a different BWC test infra in-place.
This change removes all of the legacy infra.
When there are no indexes, get mapping has a series of special cases.
Two of those expect the response object already started, and the other
two respond with an exception. Those two cases (types passed in but no
indexes and vice versa) would fail in their error response generation
because it did not expect an object to already be started in the json
generator. This change moves the object start to where it is needed for
the empty responses.
closes#21916
Those discovery nodes are already enough to go ahead with the remote search, no need to light connect and update the discovery node, it's already updated.
We will eagerly connect to all configured nodes, the liveness api call is not needed as we already do a light connect and get back the updated discovery node.
Today we can easily join a cluster that holds an index we don't support since
we currently allow rolling upgrades from 5.x to 6.x. Along the same lines we don't check if we can support an index based on the nodes in the cluster when we open, restore or metadata-upgrade and index. This commit adds
additional safety that fails cluster state validation, open, restore and /or upgrade if there is an open index with an incompatible index version created in the cluster.
Realtes to #21670
Timeouts are global today across all connections this commit allows to specify
a connection timeout per node such that depending on the context connections can
be established with different timeouts.
Relates to #19719
We currently treat every node equally when we establish connections to a node.
Yet, if we are not master eligible or can't hold any data there is no point in creating
a dedicated connection for sending the cluster state or running remote recoveries respectively.
The usage of STATE and RECOVERY connections on non-master and/or non-data nodes will result in an IllegalStateException.
For some fields we have a specialized implementation of a TermQuery that is specific for the field.
When these kind of fields are used in a wildcard query or a span term query it fails with an exception because they don't recognize the specialized form.
The impacted fields are [_all] and [_type] and the impacted queries are [span_term] and [wilcard].
This change handles these forms and correctly extracts the term inside them for further use.
Fixes#21882
javanna
Ryan Ernst
Tim B
Simon Willnauer
Simon Willnauer
Yannick Welsch
Adrien Grand
Ali Beyad
Jim Ferenczi
Jason Tedor
Christoph Büscher
Daniel Mitterdorfer
Tim Vernum
Igor Motov
Boaz Leskes
Nik Everett
Tal Levy
Stéphane Campinas
Martijn van Groningen
Colin Goodheart-Smithe
Areek Zillur
Luca Cavanna
Tanguy Leroux
Alexander Lin
Grzegorz Gajos
Dimitris Athanasiou
Daniel Mitterdorfer
Masaru Hasegawa
Aaron Spiegel
makeyang
markharwood
Clinton Gormley
Lee Hinman
Peter Dyson
Artur Nowosielski
Michael McCandless
shaie
Jay Modi
Ke Li
makeyang