This commit fixes the reproduce line output when the vagrant packagingTest
fails. Before only the `gradle packagingTest` would be output, but the
seed and list of versions was swallowed by groovy with an ancillary
failure (due to the `+` being on the wrong line for a string
continuation). With the new reproduce line, it is now output next to
the task right after failure, contains the actual task (specific to the
box that fails), and contains the seed. It also no longer contains the
upgrade versions list, as the seed is used to determine which of those
to use, and the same file would be read when testing a failure on a
particular git commit. Finally, this also ties bats test setup directly
to packagingTest, instead of to the vagrant up command.
When a rest integ test has multiple nodes, each node is supposed to not
start configuring itself until the first node has been started, so that
the unicast host information can be written. However, this was never
explicitly setup to occur, and we were just very lucky with the current
gradle version and stability of the code always produced a task graph
that had node0 starting first. With the recent refactorings to integ
tests, the order has changed. This commit fixes the ordering by adding
an explicit dependency between the first node and the other nodes.
This commit moves the LICENSE.txt and NOTICE.txt files for each plugin
to be alongside the other plugin files, inside the elasticsearch subdir.
This ensures those files are installed alongside the plugin.
Gradle's finalizedBy on tasks only ensures one task runs after another,
but not immediately after. This is problematic for our integration tests
since it allows multiple project's integ test clusters to be
simultaneously. While this has not been a problem thus far (gradle 2.13
happened to keep the finalizedBy tasks close enough that no clusters
were running in parallel), with gradle 3.3 the task graph generation has
changed, and numerous clusters may be running simultaneously, causing
memory pressure, and thus generally slower tests, or even failure if the
system has a limited amount of memory (eg in a vagrant host).
This commit reworks how integ tests are configured. It adds an
`integTestCluster` extension to gradle which is equivalent to the current
`integTest.cluster` and moves the rest test runner task to
`integTestRunner`. The `integTest` task is then just a dummy task,
which depends on the cluster runner task, as well as the cluster stop
task. This means running `integTest` in one project will both run the
rest tests, and shut down the cluster, before running `integTest` in
another project.
In #23253 we added an the ability to incrementally reduce search results.
This change exposes the parameter to control the batch since and therefore
the memory consumption of a large search request.
This commit enforces the requirement of Content-Type for the REST layer and removes the deprecated methods in transport
requests and their usages.
While doing this, it turns out that there are many places where *Entity classes are used from the apache http client
libraries and many of these usages did not specify the content type. The methods that do not specify a content type
explicitly have been added to forbidden apis to prevent more of these from entering our code base.
Relates #19388
These images have been rebuilt to be preloaded with java 8 installed.
This change re-enables the systems. It also removes some redundancy in
the rpm checks I found while testing the new images, and fixes a
potential issue with generated resources in plugins where a stale dir
can cause junk to get into the distribution.
This commit adds the elasticsearch LICENSE.txt to all plugins that
released with elasticsearch, as well as a generated NOTICE.txt specific
to the dependencies of each plugin.
When configuring which repositories to pull from, we currently add
mavenLocal() when the `repos.mavenLocal` flag is set. However, this is
only done in normal projects, but not the special buildSrc project. This
change adds that support. Note that this was not possible before gradle
2.13, as there was a bug which prevented sys props from reaching the
buildSrc project (https://issues.gradle.org/browse/GRADLE-2475).
However, we already require 2.13+.
This is related to #22116. This commit adds calls that require
SocketPermission connect to forbidden APIs.
The following calls are now forbidden:
- java.net.URL#openStream()
- java.net.URLConnection#connect()
- java.net.URLConnection#getInputStream()
- java.net.Socket#connect(java.net.SocketAddress)
- java.net.Socket#connect(java.net.SocketAddress, int)
- java.nio.channels.SocketChannel#open(java.net.SocketAddress)
- java.nio.channels.SocketChannel#connect(java.net.SocketAddress)
Now that debian is disabled, we are seeing similar failures with fedora
not able to install java. This commit temporarily disables fedora until
it is once again stable.
This changes the way that replica failures are handled such that not all
failures will cause the replica shard to be failed or marked as stale.
In some cases such as refresh operations, or global checkpoint syncs, it is
"okay" for the operation to fail without the shard being failed (because no data
is out of sync). In these cases, instead of failing the shard we should simply
fail the operation, and, in the event it is a user-facing operation, return a
5xx response code including the shard-specific failures.
This was accomplished by having two forms of the `Replicas` proxy, one that is
for non-write operations that does not fail the shard, and one that is for write
operations that will fail the shard when an operation fails.
Relates to #10708
Debian 8 has been having issues with the openjdk package dependencies
being broken. This comment comments out debian-8 from the boxes which
packaging tests will run on CI.
This is related to #22116. Core no longer needs `SocketPermission`
`connect`.
This permission is relegated to these modules/plugins:
- transport-netty4 module
- reindex module
- repository-url module
- discovery-azure-classic plugin
- discovery-ec2 plugin
- discovery-gce plugin
- repository-azure plugin
- repository-gcs plugin
- repository-hdfs plugin
- repository-s3 plugin
And for tests:
- mocksocket jar
- rest client
- httpcore-nio jar
- httpasyncclient jar
This commit upgrades the checkstyle configuration from version 5.9 to
version 7.5, the latest version as of today. The main enhancement
obtained via this upgrade is better detection of redundant modifiers.
Relates #22960
This change switches to using jrunscript, instead of jjs, for detecting
version properties of java, which is available on java versions prior to 8.
closes#22898
Currently, stored scripts use a namespace of (lang, id) to be put, get, deleted, and executed. This is not necessary since the lang is stored with the stored script. A user should only have to specify an id to use a stored script. This change makes that possible while keeping backwards compatibility with the previous namespace of (lang, id). Anywhere the previous namespace is used will log deprecation warnings.
The new behavior is the following:
When a user specifies a stored script, that script will be stored under both the new namespace and old namespace.
Take for example script 'A' with lang 'L0' and data 'D0'. If we add script 'A' to the empty set, the scripts map will be ["A" -- D0, "A#L0" -- D0]. If a script 'A' with lang 'L1' and data 'D1' is then added, the scripts map will be ["A" -- D1, "A#L1" -- D1, "A#L0" -- D0].
When a user deletes a stored script, that script will be deleted from both the new namespace (if it exists) and the old namespace.
Take for example a scripts map with {"A" -- D1, "A#L1" -- D1, "A#L0" -- D0}. If a script is removed specified by an id 'A' and lang null then the scripts map will be {"A#L0" -- D0}. To remove the final script, the deprecated namespace must be used, so an id 'A' and lang 'L0' would need to be specified.
When a user gets/executes a stored script, if the new namespace is used then the script will be retrieved/executed using only 'id', and if the old namespace is used then the script will be retrieved/executed using 'id' and 'lang'
This commit introduces sequence-number-based recovery. When a replica
has fallen out of sync, rather than performing a file-based recovery we
first attempt to replay operations since the last local checkpoint on
the replica. To do this, at the start of recovery the replica tells the
primary what its local checkpoint is. The primary will then wait for all
operations between that local checkpoint and the current maximum
sequence number to complete; this is to ensure that there are no gaps in
the operations that will be replayed from the primary to the
replica. This is a best-effort attempt as we currently have no
guarantees on the primary that these operations will be available; if we
are not able to replay all operations in the desired range, we just
fallback to file-based recovery. Later work will strengthen the
guarantees.
Relates #22484
This is related to #22116. URLRepository requires SocketPermission
connect. This commit introduces a new module called "repository-url"
where URLRepository will reside. With the new module, permissions can
be removed from core.
Add unit tests for `TopHitsAggregator` and convert some snippets in
docs for `top_hits` aggregation to `// CONSOLE`.
Relates to #22278
Relates to #18160
These files should have been removed in an earlier commit. This commit also simplifies usage of ProgressLoggerWrapper by using the Groovy delegation instead of using explicit delegation.
move "es." internal headers to separate metadata set in ElasticsearchException and stop returning them as response headers
Closes#17593
* [TEST] remove ESExceptionTests, move its methods to ElasticsearchExceptionTests or ExceptionSerializationTests
Instead of using Gradle-version specific compilation options, use distinct source sets. This also allows compilation of buildSrc/build-tools under IDEs that
don't understand the version-specific compilation options.
Relates to #22669
This changes build files so that building Elasticsearch works with both Gradle 2.13 as well as higher versions of Gradle (tested 2.14 and 3.3), enabling a smooth transition from Gradle 2.13 to 3.x.
* Upgrade to Lucene 6.4.0
`ValueSource`s are now converted to `DoubleValueSource`s using the Lucene adapter made for the migration to the new API in 6.4.0.
* S3 repository: Deprecate specifying credentials through env vars and sys props
This is a follow up to #22479, where storing credentials secure way was
added.
This commit adds a MessyRestTestPlugin to the gradle build. It extends
StandaloneRestTestPlugin. The main piece of functionality that it adds
is to copy plugin-metadata from dependencies into the
generated-resources for the current test source. This is necessary to
ensure that permissions for dependencies are applied when running the
tests.
A current limitation is that the permissions are applied differently
than in the distribution sources. When permissions are granted to all
depedencies for a module or plugin, the permissions are granted to all
dependencies on the classpath for tests besides a few hardcoded
exclusions:
- es core
- es test framework
- lucene test framework
- randomized runner
- junit library
This changes build files so that building Elasticsearch works with both Gradle 2.13 as well as higher versions of Gradle (tested 2.14 and 3.3), enabling a smooth transition from Gradle 2.13 to 3.x.
This PR removes all leniency in the conversion of Strings to booleans: "true"
is converted to the boolean value `true`, "false" is converted to the boolean
value `false`. Everything else raises an error.
Changes the error message when `action.auto_create_index` or
`index.mapper.dynamic` forbids automatic creation of an index
from `no such index` to one of:
* `no such index and [action.auto_create_index] is [false]`
* `no such index and [index.mapper.dynamic] is [false]`
* `no such index and [action.auto_create_index] contains [-<pattern>] which forbids automatic creation of the index`
* `no such index and [action.auto_create_index] ([all patterns]) doesn't match`
This should make it more clear *why* there is `no such index`.
Closes#22435
Today we have quite some abstractions that are essentially providing a simple
dispatch method to the plugins defining a `HttpServerTransport`. This commit
removes `HttpServer` and `HttpServerAdaptor` and introduces a simple `Dispatcher` functional
interface that delegate to `RestController` by default.
Relates to #18482
The IndexingOperationListener interface did not provide any
information about the shard id when a document was indexed.
This commit adds the shard id as the first parameter to all methods
in the IndexingOperationListener.
It is no longer needed. It used to contain a lot of strings
used by serialization but those have since been removed. Now
it is just another thing to pass around that we don't really
need.
Currently, such tasks are only created for default boxes (centos-7, ubuntu-1404) and not all boxes and this can be misleading for developers who want to debug testing scripts on non-default boxes.
The RestHighLevelClient class takes as as an argument a low level client instance RestClient. The first method added is ping, which returns true if the call to HEAD / went ok and false if an IOException was thrown. Any other exception gets bubbled up.
There are two kinds of tests, a unit test (RestHighLevelClientTests) that verifies the interaction between high level and low level client, and an integration test (MainActionIT) which relies on an externally started es cluster to send requests to.
Randomized runner uses a flag, tests.asserts, which we have previously
not used, but is used in lucene for disabling assertions. This change
modifies the gradle configuration to look for this flag and pass through
to the test runner to determine whether -ea and -esa are added to the
java commandline for tests.
This integrates the mocksocket jar with elasticsearch tests. Mocksocket wraps actions requiring SocketPermissions in doPrivilege blocks. This will eventually allow SocketPermissions to be assigned to the mocksocket jar opposed to the entire elasticsearch codebase.
This commit removes a leftover checkstyle suppression for a source file
that was temporarily forked into the codebase to hack around a bug in
Log4j. When that source file was removed, the suppression was left
behind.
The backwards compatibility tests rely on gradle's built-in mechanisms for resolving dependencies
to get the zip of the older version we test against. By default, this will cache snapshots for
24 hours, which can lead to unexpected failures in CI. This change makes the special configurations
for backwards compatibility always update their snapshots by setting the amount of time to cache
to 0 seconds.
This commit adds a test for applying logging levels in hierarchical
order, and addresses an issue with restoring the logging levels at the
end of a test or suite.
When starting a standalone cluster, we do not able assertions. This is
problematic because it means that we miss opportunities to catch
bugs. This commit enables assertions for standalone integration tests,
and fixes a couple bugs that were uncovered by enabling these.
Relates #22334
If we conditionally do random things, e.g. initialize a node only after the first test, we have to make sure that we unconditionally create a new seed calling random.nextLong(), then initialize the node under a private randomness context. This makes sure that any random usage through Randomness.get() will retrieve the proper random instance through RandomizedContext.current().getRandom(). When running under private randomness, the context will return the Random instance that was created with the provided seed (forked from the main random instance) rather than the main Random that's exposed to tests as well. Otherwise tests become non repeatable because that initialization part happens only before the first executed test.
Moved field values `toXContent` logic to `GetField` (from `GetResult`), which outputs its own fields, and can also parse them now. Also added `fromXContent` to `GetResult` and `GetResponse`.
The start object and end object for `GetResponse` output have been moved to `GetResult#toXContent`, from the corresponding rest action. This makes it possible to have `toXContent` and `fromXContent` completely symmetric, as parsing requires looping till an end object is found which is weird when the corresponding `toXContent` doesn't print that out.
This also introduces the foundation for testing retrieval of _source and stored field values.
Sequence BWC logic consists of two elements:
1) Wire level BWC using stream versions.
2) A changed to the global checkpoint maintenance semantics.
For the sequence number infra to work with a mixed version clusters, we have to consider situation where the primary is on an old node and replicas are on new ones (i.e., the replicas will receive operations without seq#) and also the reverse (i.e., the primary sends operations to a replica but the replica can't process the seq# and respond with local checkpoint). An new primary with an old replica is a rare because we do not allow a replica to recover from a new primary. However, it can occur if the old primary failed and a new replica was promoted or during primary relocation where the source primary is treated as a replica until the master starts the target.
1) Old Primary & New Replica - this case is easy as is taken care of by the wire level BWC. All incoming requests will have their seq# set to `UNASSIGNED_SEQ_NO`, which doesn't confuse the local checkpoint logic (keeping it at `NO_OPS_PERFORMED`)
2) New Primary & Old replica - this one is trickier as the global checkpoint service currently takes all in sync replicas into consideration for the global checkpoint calculation. In order to deal with old replicas, we change the semantics to say all *new node* in sync replicas. That means the replicas on old nodes don't count for the global checkpointing. In this state the seq# infra is not fully operational (you can't search on it, because copies may miss it) but it is maintained on shards that can support it. The old replicas will have to go through a file based recovery at some point and will get the seq# information at that point. There is still an edge case where a new primary fails and an old replica takes over. I'lll discuss this one with @ywelsch as I prefer to avoid it completely.
This PR also re-enables the BWC tests which were disabled. As such it had to fix any BWC issue that had crept in. Most notably an issue with the removal of the `timestamp` field in #21670.
The commit also includes a fix for the default value of the seq number field in replicated write requests (it was 0 but should be -2), that surface some other minor bugs which are fixed as well.
Last - I added some debugging tools like more sane node names and forcing replication request to implement a `toString`
If you write a yaml test with a `warnings` section in a `do` block
that doesn't also have a corresponding `skip` section for `warnings`
then client test runners that don't support `warnings` will fail.
This causes the elasticsearch build to fail so we catch these errors
earlier.
Related to #21811
Changes the build to recognize `NORELEASE` as well as `NOCOMMIT` to
mean the same thing as `norelease` and `nocommit` respectively. This
is useful because people have been using them that way but haven't
realized that only the lowercase versions worked.
This also explicitly forbids silly things like `NoReLeAsE` and
`noCOMMIT`, failing the build and telling you to spell them properly.
Set lucene version to 6.4.0-snapshot-ec38570 and update all the sha1s/license
Fix invalid combo after upgrade in query_string query. split_on_whitespace=false is disallowed if auto_generate_phrase_queries=true
Adapt the expectations of some tests to the new format of the Lucene explain output
REST tests use the default OOTB low/high disk watermarks of 85%/90%, which can make some tests fail if run on a machine with a fuller disk. This commit changes the watermarks in the same way as in IntegTestCase so that they're essentially ignored.
Add indices and filter information to search shards api output
The search shards api returns info about which shards are going to be hit by executing a search with provided parameters: indices, routing, preference. Indices can also be aliases, which can also hold filters. The output includes an array of shards and a summary of all the nodes the shards are allocated on. This commit adds a new indices section to the search shards output that includes one entry per index, where each index can be associated with an optional filter in case the index was hit through a filtered alias.
This is relevant since we have moved parsing of alias filters to the coordinating node.
Relates to #20916
Today there is no way to get notified if a node is disconnected. Client code
must poll the TransportClient constantly to detect that a node is not connected
anymore in order to react and add new nodes or notify altering etc. For instance
if a hostname gets resolved to an IP but that host is disconnected clients want
to reconnect by resolving the hostname again which is a common situation in cloud
environments.
Closes#21424
This commit adds the ability to support running with plugins in tests that make use of
backwards compatibility nodes. This can be used to test rolling upgrades with plugins
to ensure they do not cause issues during a rolling upgrade of elasticsearch.
In #21348 the command executed to run the packaging tests has been changed to "sudo -E bats ...", forcing all environment variables from the vagrant user to be passed to the `sudo` command. This breaks a test on opensuse-13 (the one where it checks that elasticsearch cannot be started when `java` is not found) because all the PATH from the user is passed to the sudo command.
This commit restores the previous behavior while allowing only necessary testing environment variables to be passed using a /etc/sudoers.d file.
JDK9 removed pathname canonicalization when constructing FilePermission objects, which breaks some of the FilePermissions added by Elasticsearch. This commit adds the system property jdk.io.permissionsUseCanonicalPath which makes JDK9 behave like JDK8 w.r.t. FilePermission objects (see #21534).
Today when a node starts, we create dynamic socket permissions based on
the configured HTTP ports and transport ports. If no ports are
configured, we use the default port ranges. When a tribe node starts, a
tribe node creates an internal node client for connecting to each remote
cluster. If neither an explicit HTTP port nor transport ports were
specified, the default port ranges are large enough for the tribe node
and its internal node clients. If an explicit HTTP port or transport
port was specified for the tribe node, then socket permissions for those
ports will be created, but not for the internal node clients. Whether
the internal node clients have explicit ports specified, or attempt to
bind within the default range, socket permissions for these will not
have been created and the internal node clients will hit a permissions
issue when attempting to bind. This commit addresses this issue by also
accounting for tribe nodes when creating the dynamic socket
permissions. Additionally, we add our first real integration test for
tribe nodes.
JDK9 removed pathname canonicalization when constructing FilePermission objects, which breaks some of the FilePermissions added by
Elasticsearch. This commit adds the system property jdk.io.permissionsUseCanonicalPath which makes JDK9 behave like JDK8 w.r.t. FilePermissions (see
https://github.com/elastic/elasticsearch/issues/21534).
This commit changes the current :elactisearch:qa:vagrant build file and transforms it into a Gradle plugin in order to reuse it in other projects.
Most of the code from the build.gradle file has been moved into the VagrantTestPlugin class. To avoid duplicated VMs when running vagrant tests, the Gradle plugin sets the following environment variables before running vagrant commands:
VAGRANT_CWD: absolute path to the folder that contains the Vagrantfile
VAGRANT_PROJECT_DIR: absolute path to the Gradle project that use the VagrantTestPlugin
The VAGRANT_PROJECT_DIR is used to share project folders and files with the vagrant VM. These folders and files are exported when running the task `gradle vagrantSetUp` which:
- collects all project archives dependencies and copies them into `${project.buildDir}/bats/archives`
- copy all project bats testing files from 'src/test/resources/packaging/tests' into `${project.buildDir}/bats/tests`
- copy all project bats utils files from 'src/test/resources/packaging/utils' into `${project.buildDir}/bats/utils`
It is also possible to inherit and grab the archives/tests/utils files from project dependencies using the plugin configuration:
apply plugin: 'elasticsearch.vagrant'
esvagrant {
inheritTestUtils true|false
inheritTestArchives true|false
inheritTests true|false
}
dependencies {
// Inherit Bats test utils from :qa:vagrant project
bats project(path: ':qa:vagrant', configuration: 'bats')
}
The folders `${project.buildDir}/bats/archives`, `${project.buildDir}/bats/tests` and `${project.buildDir}/bats/utils` are then exported to the vagrant VMs and mapped to the BATS_ARCHIVES, BATS_TESTS and BATS_UTILS environnement variables.
The following Gradle tasks have also be renamed:
* gradle vagrantSetUp
This task copies all the necessary files to the project build directory (was `prepareTestRoot`)
* gradle vagrantSmokeTest
This task starts the VMs and echoes a "Hello world" within each VM (was: `smokeTest`)
We currently have a lot of log messages in our CI output like
```
[thirdPartyAudit] WARNING: The referenced class 'org.noggit.JSONParser' cannot be loaded. Please fix the classpath!
[thirdPartyAudit] WARNING: The referenced class 'org.noggit.JSONParser' cannot be loaded. Please fix the classpath!
[thirdPartyAudit] WARNING: The referenced class 'org.noggit.JSONParser' cannot be loaded. Please fix the classpath!
[thirdPartyAudit] WARNING: The referenced class 'org.noggit.JSONParser' cannot be loaded. Please fix the classpath!
[thirdPartyAudit] WARNING: The referenced class 'org.noggit.JSONParser' cannot be loaded. Please fix the classpath!
[thirdPartyAudit] WARNING: The referenced class 'org.noggit.JSONParser' cannot be loaded. Please fix the classpath!
[thirdPartyAudit] WARNING: The referenced class 'org.noggit.JSONParser' cannot be loaded. Please fix the classpath!
[thirdPartyAudit] WARNING: The referenced class 'org.noggit.JSONParser' cannot be loaded. Please fix the classpath!
[thirdPartyAudit] WARNING: The referenced class 'org.noggit.JSONParser' cannot be loaded. Please fix the classpath!
... repeated 1827281 times ...
```
This changes these messages to be logged at the DEBUG level, so they
will not show up by default.
This change simply makes the level of the ant timestamp for waiting on
the integ test cluster echo at the info level instead of warn (the
default) so that it is only output when running with gradle --info, or
when the wait condition fails.
Today we still have a leftover from older percolators where lucene
query instances where created ahead of time and rewritten later.
This `LateParsingQuery` was resolving `now()` when it's really used which we
don't need anymore. As a side-effect this failed to execute some highlighting
queries when they get rewritten since at that point `now` access it not permitted
anymore to prevent bugs when queries get cached.
Closes#21295
Dependencies are currently marked as non-transitive in generated POM files by adding a wildcard (*) exclusion. This breaks compatibility with the dependency manager Apache Ivy as it incorrectly translates POMs with * excludes to Ivy XML with * excludes which results in the main artifact being excluded as well (see https://issues.apache.org/jira/browse/IVY-1531). To stay compatible with the current release of Ivy this commit uses explicit excludes for each transitive artifact instead to ensure that the main artifact is not excluded. This should be revisited when we upgrade Gradle to a higher version as the current one (2.13) as Gradle automatically translates non-transitive dependencies to * excludes in 2.14+.
Since we now validate all consumed request parameter, users can't specify
`_cat/nodes?full_id=true|false` anymore since this parameter is consumed late.
This commit adds a test for this parameter and consumes it before request is processed.
Closes#21266
Setting `discovery.initial_state_timeout: 0s` to make `discovery.zen.minimum_master_nodes: N`
work reliably can cause issues in clusters that rely on state recovery once the cluster is available.
This change makes the use or `discovery.zen.minimum_master_nodes` optional for clusters where this behavior is desirable.
Lucene 6.3 is expected to be released in the next weeks so it'd be good to give
it some integration testing. I had to upgrade randomized-testing too so that
both Lucene and Elasticsearch are on the same version.
Today we only use a single node to send requests to when we run REST tests.
In some cases we have more than one node (ie. in the BWC case) where we should
send requests to all nodes in a round-robin fashion. This change passes all
available node endpoints to the rest test.
Additionally, this change adds the setting of `discovery.zen.minimum_master_nodes`
to the cluster formation forcing the nodes to wait for all other nodes until the cluster
is formed. This allows for a more realistic master election and allows all master eligable
nodes to become master while before always the first node in the cluster became the master.
This also adds logging to each test run to log the master nodes version and the minimum node
version in the cluster to help debugging BWC test failures.
This fixes our cluster formation task to run REST tests against a mixed version cluster.
Yet, due to some limitations in our test framework `indices.rollover` tests are currently
disabled for the BWC case since they select the current master as the merge node which
happens to be a BWC node and we can't relocate all shards to it since the primaries are on
a higher version node. This will be fixed in a followup.
Closes#21142
Note: This has been cherry-picked from 5.0 and fixes several rest tests
as well as a BWC break in `OsStats.java`
Today the request interceptor can't support async calls since the response
of the async call would execute on a different thread ie. a client or listener
thread. This means in-turn that the intercepted handler is not executed with the
thread it was supposed to run and therefor can, if it's executing blocking
operations, potentially deadlock an entire server.
* Move all zen discovery classes into o.e.discovery.zen
This collapses sub packages of zen into zen. These all had just a couple
classes each, and there is really no reason to have the subpackages.
* fix checkstyle
When running `gradle run`, a developer usually intends to get a running
instance as if they had run elasticsearch from the command line. This is
different than the isolated environment we use for integration testing
plugins. This change switches the run task to use the zip distribution,
so that all modules included in the normal distribution are included.
Cleaning up a few remaining occurences of using junits ExpectedException rule in
favor of using LuceneTestCase#expectThrows() which is more concise and versatile.
This change adds a overloaded `XContentMapValues#filter` method that returns
a function enclosing the compiled automatons that can be reused across filter
calls. This for instance prevents compiling automatons over and over again when
hits are filtered or in the SourceFieldMapper for each document.
Closes#20839
Settings updates are important to be able to help and administer a cluster in distress. We shouldn't block it due to circuit breakers. An extreme example is where we are actually trying to increase and unreasonable low setting for the circuit breaker itself.
See https://elasticsearch-ci.elastic.co/job/elastic+elasticsearch+master+g1gc/242/
Instead provide services where they are needed. The class worked
well as a temporary measure to easy removal of guice from the index
level but now we can remove it entirely.
-1 @Inject annotation
This commit upgrades the Log4j 2 dependency to version 2.7 and removes
some hacks that we had in place to work around bugs in Log4j 2 version
2.6.2.
Relates #20805
Today we hold on to all possible tokenizers, tokenfilters etc. when we create
an index service on a node. This was mainly done to allow the `_analyze` API to
directly access all these primitive. We fixed this in #19827 and can now get rid of
the AnalysisService entirely and replace it with a simple map like class. This
ensures we don't create a gazillion long living objects that are entirely useless since
they are never used in most of the indices. Also those objects might consume a considerable
amount of memory since they might load stopwords or synonyms etc.
Closes#19828
Today we define a cluster wait condition to try to wait at least a
certain number of nodes when running integration tests. Alas, the wait
condition is incorrect because wait_for_nodes>=${numNodes} will be split
by parameter parsing on the equals sign so the request looks like it has
a parameter named wait_for_nodes>. The fact that REST param parsing is
lenient leads to this being undiscovered. This commit fixes this issue.
Relates #20601
Adds an integration test for the file-based discovery plugin
to test the plugin operates correctly and uses the hosts
configured in `unicast_hosts.txt` with a real cluster
Closes#20459
We have a "HUGE HACK" that allows us to publish zip artifacts to
Sonatype's OSS repository without javadoc and source jars. We don't
include those jars because the zip is just a repackaging of the
core and module jars for which we already publish the javadoc and
source jars. So we have a hack to publish the zip artifact when the
pom says the project is of type 'pom'.
The build currently depends on the presence of a Git remote named origin to determine the URL that is used in the generated POM file. As this is best-effort anyhow and only required by Maven Central, this commit allows the build to run even if a Git remote with the name "origin" is missing.
With the switch to Log4j 2 throughout our code base, the logger usage checker was temporarily disabled. This commit
adapts the checks to work with Log4j 2 and re-enables the Gradle checks.
Closes#20243
I'm not sure why we need this pom instead of the pom generated by
nebula, but if we are going to have it then we need to populate it
with appropriate stuff like project name, description, and url.
Gradle appears to have a bug in maven publshing which will not match the
artifactId of a generated pom with the artifact id it puts in the file.
This adds back a copy hack from the original pom file name to the client
pom file name (which we had before #20403 inadvertently
removed it).
This commit adds a new test TribeIT#testClusterStateNodes() to verify that the tribe node correctly reflects the nodes of the remote clusters it is connected to.
It also changes the existing tests so that they really use two remote clusters now.
* Build: Remove old maven deploy support
This change removes the old maven deploy that we have in parallel to
maven-publish, and makes maven-publish fully work with publishing to
maven local. Using `gradle publishToMavenLocal` should be used to
publish to .m2.
Note that there is an unfortunate hack that means for
zip artifacts we must first create/publish a dummy pom file, and then
follow that with the real pom file. It would be nice to have the pom
file contains packaging=zip, but maven central then requires sources and
javadocs. But our zips are really just attached artifacts, so we already
set the packaging type to pom for our zip files. This change just works
around a limitation of the underlying maven publishing library which
silently skips attached artifacts when the packaging type is set to pom.
relates #20164closes#20375
* Remove unnecessary extra spacing
We were using maven snapshots during heavy development, but this should
not be something generally available (we should never release depending
on a snapshot version in maven). This change removes the snapshot repo.
If we ever need it temporarily for some reason, we can add it if/when
it is necessary.
relates #20559
This tracks the snippets that probably should be converted to
`// CONSOLE` or `// TESTRESPONSE` and fails the build if the list
of files with such snippets doesn't match the list in `docs/build.gradle`.
Setting the file looks like
```
/* List of files that have snippets that probably should be converted to
* `// CONSOLE` and `// TESTRESPONSE` but have yet to be converted. Try and
* only remove entries from this list. When it is empty we'll remove it
* entirely and have a party! There will be cake and everything.... */
buildRestTests.expectedUnconvertedCandidates = [
'plugins/discovery-azure-classic.asciidoc',
...
'reference/search/suggesters/completion-suggest.asciidoc',
]
```
This list is in `build.gradle` because we expect it to be fairly
temporary. In a few months we'll have converted all of the docs and won't
ned it any more.
From now on if you add now docs that contain a snippet that shows an
interaction with elasticsearch you have three choices:
1. Stick `// CONSOLE` on the interactions and `// TESTRESPONSE` on the
responses. The build (specifically (`gradle docs:check`) will test that
these interactions "work". If there isn't a `// TESTRESPONSE` snippet
then "work" just means "Elasticsearch responds with a 200-level response
code and no `WARNING` headers. This is way better than nothing.
2. Add `// NOTCONSOLE` if the snippet isn't actually interacting with
Elasticsearch. This should only be required for stuff like javascript
source code or `curl` against an external service like AWS or GCE. The
snippet will not get "OPEN IN CONSOLE" or "COPY AS CURL" buttons or be
tested.
3. Add `// TEST[skip:reason]` under the snippet. This will just skip the
snippet in the test phase. This should really be reserved for snippets
where we can't test them because they require an external service that
we don't have at testing time.
Please, please, please, please don't add more things to the list. After
all, it sais there'll be cake when we remove it entirely!
Relates to #18160
This PR introduces backward compatibility index tests to test the rolling upgrade process amongst Elasticsearch instances within the same major version. The test executes in three phases. In the first phase, we form a cluster of 2 ES instances on an old version. In the second phase, we keep one of the nodes from the old cluster, kill the other node, but preserve its data directory and start an instance of the current version of ES using the same data directory as the killed instance. In the third phase, we kill the other old version ES instance from the first phase and launch a new instance, using the same data directory as the killed instance. Therefore, during phase 3, we have fully migrated and have all current versions of ES running. In each phase, we run REST tests that index documents and search them, ensuring at each stage that the documents from the previous phase are still there.
Note that because we haven't released a GA yet of 5.0, the tests currently don't start an old version cluster in the first phase. Once GA is released, this will be changed to make the backward compatibility version 5.0, while the current version in the cluster will be 5.x.
automatically between tasks, as we want some of the nodes from
the previous task to continue running in the next task. This
commit enables a cluster configuration setting to not stop
nodes automatically after a task runs, but instead the creator
of the test task must stop the running nodes explicitly in a
cleanup phase.
cluster, we wait for the cluster health to indicate the
necessary nodes have formed a cluster. This check was an
exact value (equality) check. However, if we are trying to
connect the nodes in the cluster to nodes from a previously
formed cluster (of the same name), then we will have more
nodes returned by the cluster health check than the current
task's configured number of nodes. Hence, this check needs
to be a >= check. This commit fixes it.
The JDK project is in the process of modifying the command-line flags
for various JDK tools (http://openjdk.java.net/jeps/293). In particular,
the release flag on javac has changed from -release to --release. This
commit adapts the build process to this change.
Relates #20420
SearchParseElement is renamed to FetchSubPhaseParser and moved to the search.fetch package. Its parse method doesn't get the SearchContext as argument anymore, only the XContentParser, and the return type is what gets parsed (the fetch sub phase context which we may as well rename later).
It is the parser that initializes the FetchSubPhaseContext then. SearchService retrieves the parser by name, calls parse against it and stores the result of parsing by name. No need for FetchSubPhase.ContextFactory anymore, which can be removed.
and be much more stingy about what we consider a console candidate.
* Add `// CONSOLE` to check-running
* Fix version in some snippets
* Mark groovy snippets as groovy
* Fix versions in plugins
* Fix language marker errors
* Fix language parsing in snippets
This adds support for snippets who's language is written like
`[source, txt]` and `["source","js",subs="attributes,callouts"]`.
This also makes language required for snippets which is nice because
then we can be sure we can grep for snippets in a particular language.
This commit removes a line-length violation in RemovePluginCommand.java
and removes this file from the list of files for which the line-length
check is suppressed.
Log4j has a bug where it does not handle a security exception that can
be thrown when it is rendering a stack trace. This commit intentionally
introduces jar hell with the ThrowableProxy class to work around this
bug until a fix is a released.
Relates #20306
If elasticsearch controls the ID values as well as the documents
version we can optimize the code that adds / appends the documents
to the index. Essentially we an skip the version lookup for all
documents unless the same document is delivered more than once.
On the lucene level we can simply call IndexWriter#addDocument instead
of #updateDocument but on the Engine level we need to ensure that we deoptimize
the case once we see the same document more than once.
This is done as follows:
1. Mark every request with a timestamp. This is done once on the first node that
receives a request and is fixed for this request. This can be even the
machine local time (see why later). The important part is that retry
requests will have the same value as the original one.
2. In the engine we make sure we keep the highest seen time stamp of "retry" requests.
This is updated while the retry request has its doc id lock. Call this `maxUnsafeAutoIdTimestamp`
3. When the engine runs an "optimized" request comes, it compares it's timestamp with the
current `maxUnsafeAutoIdTimestamp` (but doesn't update it). If the the request
timestamp is higher it is safe to execute it as optimized (no retry request with the same
timestamp has been run before). If not we fall back to "non-optimzed" mode and run the request as a retry one
and update the `maxUnsafeAutoIdTimestamp` unless it's been updated already to a higher value
Relates to #19813
* master:
Increase visibility of deprecation logger
Skip transport client plugin installed on JDK 9
Explicitly disable Netty key set replacement
percolator: Fail indexing percolator queries containing either a has_child or has_parent query.
Make it possible for Ingest Processors to access AnalysisRegistry
Allow RestClient to send array-based headers
Silence rest util tests until the bogusness can be simplified
Remove unknown HttpContext-based test as it fails unpredictably on different JVMs
Tests: Improve rest suite names and generated test names for docs tests
Add support for a RestClient base path
Rest test suites are currently only the directory above the yaml test
file. That is confusing when there are more than one directory level
which contain yaml tests, as there are in generated docs tests. This
change makes rest tests use the full relative path to the rest test root
as the suite name, and also makes the test names for docs tests a little
clearer (that they are testing an example from a specific line number,
instead of just the line number as an opaque test name).
While removing an index isn't actually an alias action, if we add
an alias action that deletes an index then we can delete and index
and add an alias with the same name as the index atomically, in
the same cluster state update.
Closes#20064
This changes Elasticsearch to automatically downgrade `text` and
`keyword` fields into appropriate `string` fields when changing the
mapping of indexes imported from 2.x. This allows users to use the
modern, documented syntax against 2.x indexes. It also makes it clear
that reindexing in order to recreate the index in 5.0 is required for
any long lived indexes. This change is useful for the times when you
can't (cluster is just starting, not stable enough for reindex) or
shouldn't (index will only live 90 days or something).
Adds an explicit recoverySource field to ShardRouting that characterizes the type of recovery to perform:
- fresh empty shard copy
- existing local shard copy
- recover from peer (primary)
- recover from snapshot
- recover from other local shards on same node (shrink index action)
This was previously broken because run and integTest used the same
configuration name. This change makes the configuration name prefixed by
the task the cluster is created for.
In 1e91f3b we disabled annotation processors globally. However, some
project like JMH need annotation processing, so we add an ability to
selectively enabled annotation processing for certain projects by
setting an external property in the corresponding Gradle build script.
Note that `javac` would allow to set a specific annotation processor
with the command line option `-processor`. However, due to a bug in
Gradle we we cannot use this option and need to enable all annotation
processors.
This commit sets external nodes for integration tests to default to
using 512m of heap. This can be overridden using tests.heap.size (a
system property that we already use elesewhere for setting the size of
the heap for the test runner) or using tests.jvm.argline (this last one
takes precedence).
Squashes all the subpackages of `org.elasticsearch.rest.action` down to
the following:
* `o.e.rest.action.admin` - Administrative actions
* `o.e.rest.action.cat` - Actions that make tables for `grep`ing
* `o.e.rest.action.document` - Actions that act on documents
* `o.e.rest.action.ingest` - Actions that act on ingest pipelines
* `o.e.rest.action.search` - Actions that search
I'm tempted to merge `search` into `document` but the `document`
package feels fairly complete as is and `Suggest` isn't actually always
about documents either....
I'm also tempted to merge `ingest` into `admin.cluster` because the
latter contains the actions for dealing with stored scripts.
I've moved the `o.e.rest.action.support` into `o.e.rest.action`.
I've also added `package-info.java`s to all packges in `o.e.rest`. I
figure if the package is too small to deserve a `package-info.java` file
then it is too small to deserve to be a package....
Also fixes checkstyle in all moved classes.
We have 1074 snippets that look like they should be converted to
`// CONSOLE`. At least that is what `gradle docs:listConsoleCandidates`
says. This adds `// NOTCONSOLE` to explicitly mark snippets that
*shouldn't* be converted to `// CONSOLE`. After marking the blindingly
obvious ones this cuts the remaining snippet count to 1032.
This commit defaults the max local storage nodes to one. The motivation
for this change is that a default value greather than one is dangerous
as users sometimes end up unknowingly starting a second node and start
thinking that they have encountered data loss.
Relates #19964
I also reduced the visibility of a couple classes and renamed/consolidated some
test classes for consistency, eg. removing the `Simple` prefix or using the
`<Type>FieldMapperTests` convention for testing field mappers.
Some unused annotation processors caused build-time failures. Instead,
we should just be explicit about which annotation processors we will use
(if any) with additional command-line flags.
Relates #19919
This change works around a known issue with using the maven-publish
gralde plugin. All deps are marked in the generated pom as runtime. With
this change, they are set back to compile time. This also simplified the
transitive dependencies exclusion to work the same as how it was fixed in
gradle 2.14 (wildcard exclusions).
closes#19835
This commit updates Jackson to the 2.8.1 version, which is more strict when it comes to build objects. It also adds the snakeyaml dependency that was previously shaded in jackson libs.
It also closes#18076
Adds `warnings` syntax to the yaml test that allows you to expect
a `Warning` header that looks like:
```
- do:
warnings:
- '[index] is deprecated'
- quotes are not required because yaml
- but this argument is always a list, never a single string
- no matter how many warnings you expect
get:
index: test
type: test
id: 1
```
These are accessible from the docs with:
```
// TEST[warning:some warning]
```
This should help to force you to update the docs if you deprecate
something. You *must* add the warnings marker to the docs or the build
will fail. While you are there you *should* update the docs to add
deprecation warnings visible in the rendered results.
The `loggerUsageCheck` can only run on directories that exist. It was
checking whether or not the directories exists before they were built
built and then deciding to do no work. But only if you are building in
a cleaned environment which CI does, but people rarely do locally.
After #13834 many tests that used Groovy scripts (for good or bad reason) in their tests have been moved in the lang-groovy module and the issue #13837 has been created to track these messy tests in order to clean them up.
The work started with #19280, #19302 and #19336 and this PR moves the remaining messy tests back in core, removes the dependency on Groovy, changes the scripts in order to use the mocked script engine, and change the tests to integration tests.
It also moves IndexLookupIT test back (even if it has good chance to be removed soon) and fixes its tests.
It also changes AbstractQueryTestCase to use custom script plugins in tests.
closes#13837
In an effort to reduce the number of tiny packages we have in the
code base this moves all the files that were in subdirectories of
`org.elasticsearch.rest.action.admin.cluster` into
`org.elasticsearch.rest.action.admin.cluster`.
Also fixes line length in these packages.
In an effort to reduce the number of tiny packages we have in the
code base this moves all the files that were in subdirectories of
`org.elasticsearch.rest.action.admin.indices` into
`org.elasticsearch.rest.action.admin.indices`.
It also adds a `package-info.java` file explaining what the files in
the package *do*.
Also fixes line length in these packages. It makes a single non-checkstyle
change: implementing `ToXContent` on `GetIndexTemplatesResponse`. I did
this because it was the right thing to do and it fixed a line length
violation.
This adds a header that looks like `Location: /test/test/1` to the
response for the index/create/update API. The requirement for the header
comes from https://www.w3.org/Protocols/rfc2616/rfc2616-sec10.htmlhttps://tools.ietf.org/html/rfc7231#section-7.1.2 claims that relative
URIs are OK. So we use an absolute path which should resolve to the
appropriate location.
Closes#19079
This makes large changes to our rest test infrastructure, allowing us
to write junit tests that test a running cluster via the rest client.
It does this by splitting ESRestTestCase into two classes:
* ESRestTestCase is the superclass of all tests that use the rest client
to interact with a running cluster.
* ESClientYamlSuiteTestCase is the superclass of all tests that use the
rest client to run the yaml tests. These tests are shared across all
official clients, thus the `ClientYamlSuite` part of the name.
After #13834 many tests that used Groovy scripts (for good or bad reason) in their tests have been moved in the lang-groovy module and the issue #13837 has been created to track these messy tests in order to clean them up.
This commit moves more tests back in core, removes the dependency on Groovy, changes the scripts in order to use the mocked script engine, and change the tests to integration tests.
Maven central requires a project url. The recent change to make poms for
plugin client jars broke that because we no longer use nebula publishing
for plugin pom generation. This change adds back the url to the pom.
This change removes the multiple ways that plugins can be added to the
integ test cluster. It also removes the use of the default
configuration, and instead adds a zip configuration to all plugins. This
will enable using project substitutions with plugins, which must be done
with the default configuration.
Moving the dependent jars instead of copying breaks downstream builds
that rely on the jars existing for compilation. This commit modifies
these moves to be copies.
This changes adds a flag which can be set in the esplugin closure in
build.gradle for plugins and modules which contain pieces that must be
published to maven, for use in the transport client. The jar/pom and
source/javadoc jars are moved to a new name that has the suffix
"-client".
I enabled this for the two modules that I know definitely need this;
there may be more. One open question is which groupId to use for the
generated pom.
closes#19411
This moves all netty related code into modules/transport-netty the module is build as a zip file as well as a JAR to serve as a dependency for transport client. For the time being this is required otherwise we have no network based impl. for transport client users. This might be subject to change given that we move forward http client.
* Clean up the generics around significant terms aggregation results
* Reduce code duplicated between `SignificantLongTerms` and
`SignificantStringTerms` by creating `InternalMappedSignificantTerms`
and moving common things there where possible.
* Migrate to `NamedWriteable`
* Line length fixes while I was there
This exposes a method to start an action and return a task from
`NodeClient`. This allows reindex to use the injected `Client` rather
than require injecting `TransportAction`s
After #13834 many tests that used Groovy scripts (for good or bad reason) in their tests have been moved in the lang-groovy module and the issue #13837 has been created to track these messy tests in order to clean them up.
This commit moves more tests back in core, removes the dependency on Groovy, changes the scripts in order to use the mocked script engine, and change the tests to integration tests.
This commit moves back some messy tests that have been placed in lang-groovy module in https://github.com/elastic/elasticsearch/pull/13834. It removes the dependency on Groovy plugin as well as change back the tests to integration tests (IT suffix).
It also changes the current MockScriptEngine and MockScriptPlugin to make it easier to use.
This change activates the doc_values on the _size field for indices created after 5.0.0-alpha4.
It also adds a note in the breaking changes that explain the situation and how to get around it.
Closes#18334
Node IDs are currently randomly generated during node startup. That means they change every time the node is restarted. While this doesn't matter for ES proper, it makes it hard for external services to track nodes. Another, more minor, side effect is that indexing the output of, say, the node stats API results in creating new fields due to node ID being used as keys.
The first approach I considered was to use the node's published address as the base for the id. We already [treat nodes with the same address as the same](https://github.com/elastic/elasticsearch/blob/master/core/src/main/java/org/elasticsearch/discovery/zen/NodeJoinController.java#L387) so this is a simple change (see [here](https://github.com/elastic/elasticsearch/compare/master...bleskes:node_persistent_id_based_on_address)). While this is simple and it works for probably most cases, it is not perfect. For example, if after a node restart, the node is not able to bind to the same port (because it's not yet freed by the OS), it will cause the node to still change identity. Also in environments where the host IP can change due to a host restart, identity will not be the same.
Due to those limitation, I opted to go with a different approach where the node id will be persisted in the node's data folder. This has the upside of connecting the id to the nodes data. It also means that the host can be adapted in any way (replace network cards, attach storage to a new VM). I
It does however also have downsides - we now run the risk of two nodes having the same id, if someone copies clones a data folder from one node to another. To mitigate this I changed the semantics of the protection against multiple nodes with the same address to be stricter - it will now reject the incoming join if a node exists with the same id but a different address. Note that if the existing node doesn't respond to pings (i.e., it's not alive) it will be removed and the new node will be accepted when it tries another join.
Last, and most importantly, this change requires that *all* nodes persist data to disk. This is a change from current behavior where only data & master nodes store local files. This is the main reason for marking this PR as breaking.
Other less important notes:
- DummyTransportAddress is removed as we need a unique network address per node. Use `LocalTransportAddress.buildUnique()` instead.
- I renamed `node.add_lid_to_custom_path` to `node.add_lock_id_to_custom_path` to avoid confusion with the node ID which is now part of the `NodeEnvironment` logic.
- I removed the `version` paramater from `MetaDataStateFormat#write` , it wasn't really used and was just in the way :)
- TribeNodes are special in the sense that they do start multiple sub-nodes (previously known as client nodes). Those sub-nodes do not store local files but derive their ID from the parent node id, so they are generated consistently.
Once all of these are migrated we'll be able to remove aggregation's
custom "streams" which function that same as NamedWriteable. It also
allows us to make most of the fields on aggregations final which is
rather nice.
The internal representation of the object that JsonPath gives access to is a map. That is independent of the initial input format, which is json but could also be yaml etc.
This commit renames JsonPath to ObjectPath and adds a static method to create an ObjectPath from an XContent
We introduced a special response_body assertion to test our docs snippets. The match assertion does the same job though and can be reused and adapted where needed. ResponseBodyAssertion contains provides much better and accurate errors though, which can be now utilized in MatchAssertion so that many more REST tests can benefit from readable error messages.
Each response body gets always stashed and can be retrieved for later evaluations already. Instead of providing the response body as strings that get parsed to json objects separately, then converted to maps as ResponseBodyAssertion did, we parse everything once, the json is part of the yaml test, which is supported. The only downside is that json comments cannot be used, rather yaml comments should be used (// C style vs # ). There were only two docs tests that were using comments in ingest-node.asciidoc where I went ahead and remove the comments which didn't seem that useful anyways.
As discussed at https://github.com/elastic/elasticsearch-cloud-azure/issues/91#issuecomment-229113595, we know that the current `discovery-azure` plugin only works with Azure Classic VMs / Services (which is somehow Legacy now).
The proposal here is to rename `discovery-azure` to `discovery-azure-classic` in case some users are using it.
And deprecate it for 5.0.
Closes#19144.
This commit modifies TimeValue parsing to keep the input time unit. This
enables round-trip parsing from instances of String to instances of
TimeValue and vice-versa. With this, this commit removes support for the
unit "w" representing weeks, and also removes support for fractional
values of units (e.g., 0.5s).
Relates #19102
Instead of plugins calling `registerTokenizer` to extend the analyzer
they now instead have to implement `AnalysisPlugin` and override
`getTokenizer`. This lines up extending plugins in with extending
scripts. This allows `AnalysisModule` to construct the `AnalysisRegistry`
immediately as part of its constructor which makes testing anslysis
much simpler.
This also moves the default analysis configuration into `AnalysisModule`
which is how search is setup.
Like `ScriptModule`, `AnalysisModule` no longer extends `AbstractModule`.
Instead it is only responsible for building `AnslysisRegistry`. We still
bind `AnalysisRegistry` but we only do so in `Node`. This is means it
is available at module construction time so we slowly remove the need to
bind it in guice.
This commit reverts the slow tests heartbeat added in
b6fbd18e09. The heartbeat has not served
its stated purpose of drawing attention to slow tests, and the heartbeat
can kill builds with SELinux enforcing enabled. While the heartbeats can
be disabled via the environment variable PULSE_SERVER, and SELinux
policy files can be changed, since the heartbeats are not accomplishing
their intended purpose they should be removed.
Relates #19071
This commit upgrades JNA from version 4.1.0 to 4.2.2. Additionally, this
dependency is now non-optional as JNA is dual-licensed with Apache
License 2.0 since JNA 4.0.0.
Relates #19045
ES only sends a non-200 response all shards fail but we should
fail the tests generated by docs if any of them fail.
Depending on the outcome of #18978 this might be a temporary
workaround.
Today we only emit that the setting wasn't found unless we have
some DYM suggestions. Yet, if a setting is not found at all and there
are no suggestions due to typos it's likely a removed setting or the plugin
that is supposed to be configured is not installed.
This commit adds some info text to the exception to help the user debugging
the problem before opening bugreports.
Instead of emitting:
`unknown setting [foo.bar]`
we now emit:
`unknown setting [foo.bar] please check the migration guide for removed settings and ensure that the plugin you are configuring is installed`
Relates to #18663
We pretended to be able to ackt like a different version node for so long it's
time to be honest and remove this ability. It's just confusing and where needed
and tested we should build dedicated extension points.
This change removes some unnecessary dependencies from ClusterService
and cleans up ClusterName creation. ClusterService is now not created
by guice anymore.
Projects that don't depend on elasticsearch-test fail otherwise because org.elasticsearch.test.EsIntegTestCase (default integ test class) is not in the classpath. They should provide their onw integ test base class, but having integration tests should not be mandatory. One can simply set skipIntegTestsInDisguise to true to prevent loading of integ test class.
Today we have a push model for registering basically anything. All our extension points
are defined on modules which we pass in to plugins. This is harder to maintain and adds
unnecessary dependencies on the modules itself. This change moves towards a pull model
where the plugin offers a getter kind of method to get the extensions. This will also
help in the future if we need to pass dependencies to the extension points which can
easily be defined on the method as arguments if a pull model is used.
With this commit we add a benchmarks project that contains the necessary build
infrastructure and an example benchmark. It is added as a separate project to avoid
interfering with the regular build too much (especially sanity checks) and to keep
the microbenchmarks isolated.
Microbenchmarks are generated with `gradle :benchmarks:jmhJar` and can be run with
` gradle :benchmarks:jmh`.
We intentionally do not use the
[jmh-gradle-plugin](https://github.com/melix/jmh-gradle-plugin) as it causes all
sorts of problems (dependencies are not properly excluded, not all JMH parameters
can be set) and it adds another abstraction layer that is not needed.
Closes#18242
This will let things that don't depend on :test:framework like the
client use it.
Also skip initializing the classes we check because we don't care
about their initialization behavior because we're not executing them.
This makes the naming conventions check pretty close to instant
from a "human eye" perspective.
Groovy does some crazy capturing when using closures inside a loop. In
this case, it somehow decided the local loop variable would be
modified, and so each closure was getting a wrapped value that would be
updated on each loop iteration, until all the closures pointed at the
last value. This change fixes the loop to extract the object to be used by
the closures.
Testability of ICSS is achieved by introducing interfaces for IndicesService, IndexService and IndexShard. These interfaces extract all relevant methods used by ICSS (which do not deal directly with store) and give the possibility to easily mock all the store behavior away in the tests (and cuts down on dependencies).
Folded grok processor into ingest-common module.
The rest tests have been moved to ingest-common module as well, because these tests don't run in the rest-api-spec module but in the distribution:integ-test-zip module
and adding a test plugin there felt just wrong to me. I think this is ok. I left a tiny ingest rest test behind in that tests with an empty pipeline.
Removed messy tests, these tests were already covered in the rest tests
Added ingest test plugin in test infra so that each module testing integration with ingest doesn't need write its own plugin
Moved reindex ingest tests to qa module
Closes#18490
This adds support for setting the refresh request parameter to
`wait_for` in the `index`, `delete`, `update`, and `bulk` APIs. When
`refresh=wait_for` is set those APIs will not return until their
results have been made visible to search by a refresh.
Also it adds a `forced_refresh` field to the response of `index`,
`delete`, `update`, and to each item in a bulk response. This will
be true for requests with `?refresh` or `?refresh=true` and will be
true for some requests (see below) with `refresh=wait_for` but ought
to otherwise always be false.
`refresh=wait_for` is implemented as a list of
`Tuple<Translog.Location, Consumer<Boolean>>`s in the new `RefreshListeners`
class that is managed by `IndexShard`. The dynamic, index scoped
`index.max_refresh_listeners` setting controls a maximum number of
listeners allowed in any shard. If more than that many listeners
accumulate in the engine then a refresh will be forced, the thread that
adds the listener will be blocked until the refresh completes, and then the
listener will be called with a `forcedRefresh` flag so it knows that it was
the "straw that broke the camel's back". These listeners are only used by
`refresh=wait_for` and that flag manifests itself as `forced_refresh` being
`true` in the response.
About half of this change comes from piping async-ness down to the appropriate
layer in a way that is compatible with the ongoing with with sequence ids.
Closes#1063
You can look up the winding story of all the commits here:
https://github.com/elastic/elasticsearch/pull/17986
Here are the commit messages in case they are intersting to you:
commit 59a753b89109828d2b8f0de05cb104fc663cf95e
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Jun 6 10:18:23 2016 -0400
Replace a method reference with implementing an interface
Saves a single allocation and forces more commonality
between the WriteResults.
commit 31f7861a85b457fb7378a6f27fa0a0c171538f68
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Jun 6 10:07:55 2016 -0400
Revert "Replace static method that takes consumer with delegate class that takes an interface"
This reverts commit 777e23a6592c75db0081a53458cc760f4db69507.
commit 777e23a6592c75db0081a53458cc760f4db69507
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Jun 6 09:29:35 2016 -0400
Replace static method that takes consumer with delegate class that takes an interface
Same number of allocations, much less code duplication.
commit 9b49a480ca9587a0a16ebe941662849f38289644
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Jun 6 08:25:38 2016 -0400
Patch from boaz
commit c2bc36524fda119fd0514415127e8901d94409c8
Author: Nik Everett <nik9000@gmail.com>
Date: Thu Jun 2 14:46:27 2016 -0400
Fix docs
After updating to master we are actually testing them.
commit 03975ac056e44954eb0a371149d410dcf303e212
Author: Nik Everett <nik9000@gmail.com>
Date: Thu Jun 2 14:20:11 2016 -0400
Cleanup after merge from master
commit 9c9a1deb002c5bebb2a997c89fa12b3d7978e02e
Author: Nik Everett <nik9000@gmail.com>
Date: Thu Jun 2 14:09:14 2016 -0400
Breaking changes notes
commit 1c3e64ae06c07a85f7af80534fab88279adb30b4
Merge: 9e63ad6 f67e580
Author: Nik Everett <nik9000@gmail.com>
Date: Thu Jun 2 14:00:05 2016 -0400
Merge branch 'master' into block_until_refresh2
commit 9e63ad6de52d0b28f0b6d7203721baf1ebf6f56b
Author: Nik Everett <nik9000@gmail.com>
Date: Thu Jun 2 13:21:27 2016 -0400
Test for TransportWriteAction
commit 522ecb59d39b3c9e8df0d3b8df34b9e7aeaf0ce9
Author: Nik Everett <nik9000@gmail.com>
Date: Thu Jun 2 10:30:18 2016 -0400
Document deprecation
commit 0cd67b947f58867e704a1f0e66928a6fb5a11f11
Author: Nik Everett <nik9000@gmail.com>
Date: Thu Jun 2 10:26:23 2016 -0400
Deprecate setRefresh(boolean)
Users should use `setRefresh(RefreshPolicy)` instead.
commit aeb1be3f2c501990b33fb1f8230d496035f498ef
Author: Nik Everett <nik9000@gmail.com>
Date: Thu Jun 2 10:12:27 2016 -0400
Remove checkstyle suppression
It is fixed
commit 00d09a9caa638b6f90f4896b5502dd98d8fad56e
Author: Nik Everett <nik9000@gmail.com>
Date: Thu Jun 2 10:08:28 2016 -0400
Improve comment
commit 788164b898a6ee2878a273961230122b7386c3c9
Author: Nik Everett <nik9000@gmail.com>
Date: Thu Jun 2 10:01:01 2016 -0400
S/ReplicatedWriteResponse/WriteResponse/
Now it lines up with WriteRequest.
commit b74cf3fe778352b140355afcaa08d3d4412d749d
Author: Nik Everett <nik9000@gmail.com>
Date: Wed Jun 1 18:27:52 2016 -0400
Preserve `?refresh` behavior
`?refresh` means the same things as `?refresh=true`.
commit 30f972bdaeaaa0de6fe67746cdb8628aa86f5a8c
Author: Nik Everett <nik9000@gmail.com>
Date: Wed Jun 1 17:39:05 2016 -0400
Handle hanging documents
If a document is added to the index during a refresh we weren't properly
firing its refresh listener. This happened because the way we detect
whether a refresh makes something visible or not is imperfect. It is
ok because it always errs on the side of thinking that something isn't
yet visible.
So when a document arrives during a refresh the refresh listeners
won't think it made it into a refresh when, often, it does. The way
we work around this is by telling Elasticsearch that it ought to
trigger a refresh if there are any pending refresh listeners even
if there aren't pending documents to update. Lucene short circuits
the refresh so it doesn't take that much effort, but the refresh
listeners still get the signal that a refresh has come in and they
still pick up the change and notify the listener.
This means that the time that a listener can wait is actually slightly
longer than the refresh interval.
commit d523b5702b60c7ba309fb0dcf3cd3a4798f11960
Author: Nik Everett <nik9000@gmail.com>
Date: Wed Jun 1 14:34:01 2016 -0400
Explain Integer.MAX_VALUE
commit 4ffb7c0e954343cc1c04b3d7be2ebad66d3a016b
Author: Nik Everett <nik9000@gmail.com>
Date: Wed Jun 1 14:27:39 2016 -0400
Fire all refresh listeners in a single thread
Rather than queueing a runnable each.
commit 19606ec3bbe612095df45eba734c5b7eb2709c01
Author: Nik Everett <nik9000@gmail.com>
Date: Wed Jun 1 14:09:52 2016 -0400
Assert translog ordering
commit 6bb4e5c75e850f4a42518f06fbc955f7ec76d245
Author: Nik Everett <nik9000@gmail.com>
Date: Wed Jun 1 13:17:44 2016 -0400
Support null RefreshListeners in InternalEngine
Just skip using it.
commit 74be1480d6e44af2b354ff9ea47c234d4870b6c2
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 31 18:02:03 2016 -0400
Move funny ShardInfo hack for bulk into bulk
This should make it easier to understand because it is closer to where it
matters....
commit 2b771f8dabd488e056cfdc9989608d18264ddfb0
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 31 17:39:46 2016 -0400
Pull listener out into an inner class with javadoc and stuff
commit 058481ad72019c0492b03a7a4ac32a48673697d3
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 31 17:33:42 2016 -0400
Fix javadoc links
commit d2123b1cabf29bce8ff561d4a4c1c1d5b42bccad
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 31 17:28:09 2016 -0400
Make more stuff final
commit 8453fc4f7850f6a02fb5971c17a942a3e3fd9f7b
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 31 17:26:48 2016 -0400
Javadoc
commit fb16d2fc7016c1e8e1621d481e8781c7ef43326c
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 31 16:14:48 2016 -0400
Rewrite refresh docs
commit 5797d1b1c4d233c0db918c0d08c21731ddccd05e
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 31 15:02:34 2016 -0400
Fix forced_refresh flag
It wasn't being set.
commit 43ce50a1de250a9e073a2ca6cbf55c1b4c74b11b
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 31 14:02:56 2016 -0400
Delay translog sync and flush until after refresh
The sync might have occurred for us during the refresh so we
have less work to do. Maybe.
commit bb2739202e084703baf02cfa58f09517598cf14e
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 31 13:08:08 2016 -0400
Remove duplication in WritePrimaryResult and WriteReplicaResult
commit 2f579f89b4867a880396f2e7fcffc508449ff2de
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 31 12:19:05 2016 -0400
Clean up registration of RefreshListeners
commit 87ab6e60ca5ba945bf0fba84784b2bbe53506abf
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 31 11:28:30 2016 -0400
Shorten lock time in RefreshListeners
Also use null to represent no listeners rather than an empty list.
This saves allocating a new ArrayList every refresh cycle on every
index.
commit 0d49d9c5720dadfb67da3fa760397bf6d874601c
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 24 10:46:18 2016 -0400
Flip relationship between RefreshListeners and Engine
Now RefreshListeners comes to Engine from EngineConfig.
commit b2704b8a39382953f8f91a9743e894ee289f7514
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 24 09:37:58 2016 -0400
Remove unused imports
Maybe I added them?
commit 04343a22647f19304d9dc716b3fac9b183227f63
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 24 09:37:52 2016 -0400
Javadoc
commit da1e765678890a02d61d8a29aa433274beb5e00c
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 24 09:26:35 2016 -0400
Reply with non-null
Also move the fsync and flush to before the refresh listener stuff.
commit 5d8eecd0d904b497844b4c81c46477bd6178ed3a
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 24 08:58:47 2016 -0400
Remove funky synchronization in AsyncReplicaAction
commit 1ec71eea0f4e1228ae1497d982307be818ef4b65
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 24 08:01:14 2016 -0400
s/LinkedTransferQueue/ArrayList/
commit 7da36a4ceed2ccf7955138c3b005237fa41efcb4
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 24 07:46:38 2016 -0400
More cleanup for RefreshListeners
commit 957e9b77007c32ee75dde152c6622bab065d5993
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 24 07:34:13 2016 -0400
/Consumer<Runnable>/Executor/
commit 4d8bf5d4a70dcc56150c8d8d14165cd23d308b3c
Author: Nik Everett <nik9000@gmail.com>
Date: Mon May 23 22:20:42 2016 -0400
explain
commit 15d948a348089bb2937eec5ac4e96f3ec67dbe32
Author: Nik Everett <nik9000@gmail.com>
Date: Mon May 23 22:17:59 2016 -0400
Better....
commit dc28951d02973fc03b4d51913b5f96de14b75607
Author: Nik Everett <nik9000@gmail.com>
Date: Mon May 23 21:09:20 2016 -0400
Javadocs and compromises
commit 8eebaa89c0a1ee74982fbe0d56d1485ca2ae09db
Author: Nik Everett <nik9000@gmail.com>
Date: Mon May 23 20:52:49 2016 -0400
Take boaz's changes to their logic conclusion and unbreak important stuff like bulk
commit 7056b96ea412f275005b93e3570bcff895859ed5
Author: Nik Everett <nik9000@gmail.com>
Date: Mon May 23 15:49:32 2016 -0400
Patch from boaz
commit 87be7eaed09a274cc6a99d1a3da81d2d7bf9dd64
Author: Nik Everett <nik9000@gmail.com>
Date: Mon May 23 15:49:13 2016 -0400
Revert "Move async parts of replica operation outside of the lock"
This reverts commit 13807ad10b6f5ecd39f98c9f20874f9f352c5bc2.
commit 13807ad10b6f5ecd39f98c9f20874f9f352c5bc2
Author: Nik Everett <nik9000@gmail.com>
Date: Fri May 20 22:53:15 2016 -0400
Move async parts of replica operation outside of the lock
commit b8cadcef565908b276484f7f5f988fd58b38d8b6
Author: Nik Everett <nik9000@gmail.com>
Date: Fri May 20 16:17:20 2016 -0400
Docs
commit 91149e0580233bf79c2273b419fe9374ca746648
Author: Nik Everett <nik9000@gmail.com>
Date: Fri May 20 15:17:40 2016 -0400
Finally!
commit 1ff50c2faf56665d221f00a18d9ac88745904bf5
Author: Nik Everett <nik9000@gmail.com>
Date: Fri May 20 15:01:53 2016 -0400
Remove Translog#lastWriteLocation
I wasn't being careful enough with locks so it wasn't right anyway.
Instead this builds a synthetic Tranlog.Location when you call
getWriteLocation with much more relaxed equality guarantees. Rather
than being equal to the last Translog.Location returned it is
simply guaranteed to be greater than the last translog returned
and less than the next.
commit 55596ea68b5484490c3637fbad0d95564236478b
Author: Nik Everett <nik9000@gmail.com>
Date: Fri May 20 14:40:06 2016 -0400
Remove listener from shardOperationOnPrimary
Create instead asyncShardOperationOnPrimary which is called after
all of the replica operations are started to handle any async
operations.
commit 3322e26211bf681b37132274ee158ae330afc28b
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 17 17:20:02 2016 -0400
Increase default maximum number of listeners to 1000
commit 88171a8322a424e624d48960fb4c98dd43e4d671
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 17 16:40:57 2016 -0400
Rename test
commit 179c27c4f829f2c6ded65967652cf85adaf2ae52
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 17 16:35:27 2016 -0400
Move refresh listeners into their own class
They still live at the IndexShard level but they live on their
own in RefreshListeners which interacts with IndexShard using a
couple of callbacks and a registration method. This lets us test
the listeners without standing up an entire IndexShard. We still
test the listeners against an InternalEngine, because the interplay
between InternalEngine, Translog, and RefreshListeners is complex
and important to get right.
commit d8926d5fc1d24b4da8ccff7e0f0907b98c583c41
Author: Nik Everett <nik9000@gmail.com>
Date: Tue May 17 11:02:38 2016 -0400
Move refresh listeners into IndexShard
commit df91cde398eb720143a85a8c6fa19bdc3a74e07d
Author: Nik Everett <nik9000@gmail.com>
Date: Mon May 16 16:01:03 2016 -0400
unused import
commit 066da45b08148b266e4173166662fc1b3f66ed53
Author: Nik Everett <nik9000@gmail.com>
Date: Mon May 16 15:54:11 2016 -0400
Remove RefreshListener interface
Just pass a Translog.Location and a Consumer<Boolean> when registering.
commit b971d6d3301c7522b2e7eb90d5d8dd96a77fa625
Author: Nik Everett <nik9000@gmail.com>
Date: Mon May 16 14:41:06 2016 -0400
Docs for setForcedRefresh
commit 6c43be821eaf61141d3ec520f988aad3a96a3941
Author: Nik Everett <nik9000@gmail.com>
Date: Mon May 16 14:34:39 2016 -0400
Rename refresh setter and getter
commit e61b7391f91263a4c4d6107bfbc2a828bbcc805c
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 22:48:09 2016 -0400
Trigger listeners even when there is no refresh
Each refresh gives us an opportunity to pick up any listeners we may
have left behind.
commit 0c9b0477085c021f503db775640d25668e02f635
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 20:30:06 2016 -0400
REST
commit 8250343240de7e63118c663a230a7a314807a754
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 19:34:22 2016 -0400
Switch to estimated count
We don't need a linear time count of the number of listeners - a volatile
variable is good enough to guess. It probably undercounts more than it
overcounts but it isn't a huge problem.
commit bd531167fe54f1bde6f6d4ddb0a8de5a7bcc18a2
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 18:21:02 2016 -0400
Don't try and set forced refresh on bulk items without a response
NullPointerExceptions are bad. If the entire request fails then the user
has worse problems then "did these force a refresh".
commit bcfded11515af5e0b3c3e36f3c2f73f5cd26512e
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 18:14:20 2016 -0400
Replace LinkedList and synchronized with LinkedTransferQueue
commit 8a80cc70a76375a7593745884cb987535b37ca80
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 17:38:24 2016 -0400
Support for update
commit 1f36966742f851b7328015151ef6fc8f95299af2
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 15:46:06 2016 -0400
Cleanup translog tests
commit 8d121bf35eb265b8a0aee9710afeb1b054a113d4
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 15:40:53 2016 -0400
Cleanup listener implementation
Much more testing too!
commit 2058f4a808762c4588309f21b13b677245832f2c
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 11:45:55 2016 -0400
Pass back information about whether we refreshed
commit e445cb0cb91ebdbcfdbf566696edb2bf1c84a882
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 11:03:31 2016 -0400
Javadoc
commit 611cbeeaeb458f4b428bfc43a1ee6652adf4baff
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 11:01:40 2016 -0400
Move ReplicationResponse
now it is in the same package as its request
commit 9919758b644fd73895fb88cd6a4909a8387eb2e2
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 11:00:14 2016 -0400
Oh boy that wasn't working
commit 247cb483c4459dea8e95e0e3bd2e4bf8d452c598
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 10:29:37 2016 -0400
Basic block_until_refresh exposed to java client
and basic "is it plugged in" style tests.
commit 46c855c9971cb2b748206d2afa6a2d88724be3ba
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 10:11:10 2016 -0400
Move test to own class
commit a5ffd892d0a352ae7e9757f2640fc2a1fa656bf2
Author: Nik Everett <nik9000@gmail.com>
Date: Mon Apr 25 07:44:25 2016 -0400
WIP
commit 213bebb6ece11b85d17e44af9a54fc2e5e332d39
Author: Nik Everett <nik9000@gmail.com>
Date: Fri Apr 22 21:35:52 2016 -0400
Add refresh listeners
commit a2bc7f30e6d4857a1224ef5a89909b36c8f33731
Author: Nik Everett <nik9000@gmail.com>
Date: Fri Apr 22 21:11:55 2016 -0400
Return last written location from refresh
commit 85033a87551da89f36a23d4dfd5016db218e08ee
Author: Nik Everett <nik9000@gmail.com>
Date: Fri Apr 22 20:28:21 2016 -0400
Never reply to replica actions while you have the operation lock
This last thing was causing periodic test failures because we were
replying while we had the operation lock. Now, we probably could get
away with that in most cases but the tests don't like it and it isn't
a good idea to do network io while you have a lock anyway. So this
prevents it.
commit 1f25cf35e796835b3827b8a4110e09e5de61784c
Author: Nik Everett <nik9000@gmail.com>
Date: Fri Apr 22 19:56:18 2016 -0400
Cleanup
commit 52c5f7c3f04710901f503334239a611c0e21c85a
Author: Nik Everett <nik9000@gmail.com>
Date: Fri Apr 22 19:33:00 2016 -0400
Add a listener to shard operations
commit 5b142dc331214c8eef90587144f4b3f959f9eced
Author: Nik Everett <nik9000@gmail.com>
Date: Fri Apr 22 18:03:52 2016 -0400
Cleanup
commit 3d22b2d7ceb473db339259452a7c4f117ce86069
Author: Nik Everett <nik9000@gmail.com>
Date: Fri Apr 22 17:59:55 2016 -0400
Push the listener into shardOperationOnPrimary
commit 34b378943b8185451acf6350f661c0ad33b5836d
Author: Nik Everett <nik9000@gmail.com>
Date: Fri Apr 22 17:48:47 2016 -0400
Doc
commit b42b8da968d42cc7414020c7b199606a5dcce50a
Author: Nik Everett <nik9000@gmail.com>
Date: Fri Apr 22 17:45:40 2016 -0400
Don't finish early if the primary finishes early
We use a "fake" pending shard that we resolve when the replicas have
all started.
commit 0fc045b56e1e02a48c30383ac50a281d5af7e0b6
Author: Nik Everett <nik9000@gmail.com>
Date: Fri Apr 22 17:30:06 2016 -0400
Make performOnPrimary asyncS
Instead of returning Tuple<Response, ReplicaRequest> it returns
ReplicaRequest and takes a ActionListener<Response> as an argument.
We call the listener immediately to preserve backwards compatibility
for now.
commit 80119b9a26ede96a865af45904c3ac69d5b19b59
Author: Nik Everett <nik9000@gmail.com>
Date: Fri Apr 22 16:51:53 2016 -0400
Factor out common code in shardOperationOnPrimary
commit 0642083676702618f900fa842c08802a04c1a53e
Author: Nik Everett <nik9000@gmail.com>
Date: Fri Apr 22 16:32:29 2016 -0400
Factor out common code from shardOperationOnReplica
commit 8bdc415fedaaa9f2d0c555590a13ec4699a7c3f7
Author: Nik Everett <nik9000@gmail.com>
Date: Fri Apr 22 16:23:28 2016 -0400
Create ReplicatedMutationRequest
Superclass for index, delete, and bulkShard requests.
commit 0f8fa846a2822c4293df32fed18c9b99660b39ff
Author: Nik Everett <nik9000@gmail.com>
Date: Fri Apr 22 16:10:30 2016 -0400
Create TransportReplicatedMutationAction
It is the superclass of replication actions that mutate data: index, delete,
and shardBulk. shardFlush and shardRefresh are replication actions but they
do not extend TransportReplicatedMutationAction because they don't change
the data, only shuffle it around.
* [TEST] wait for yellow after setup doc tests
We have many places in the doc where we expect and index to be
yellow before we execute a query. Therefore we have to
always wait for yellow after setup.
We still have a wrapper called RestTestClient that is very specific to Rest tests, as well as RestTestResponse etc. but all the low level bits around http connections etc. are now handled by RestClient.
If this option is enabled on a processor it silently catches any processor related failure and continues executing the rest of the pipeline.
Closes#18493
There is no reason to read the entire marvel hero file to test the features,
it might take several seconds to do so which is unnecessary.
This commit also splits SearchSuggestTests into core and modules/mustache
also add @Nighlty to forbidden API to make sure we don't use it since they won't run in CI these days.
This change makes it possible to compile a separate project with e.g. targetCompatibility 1.7. Adds specific options (compact profile) only when compiling for >= 1.8.
It came out with improvements around idea integration and language levels. This will make it possible to have the upcoming java client as a new project compiled against java 7 and have idea working on the right language level.
We currently fail on any deprecations found during the build. However,
this includes things deprecated within ES, which adds a heavy burden in
order to deprecate apis (requring to add suppressions to all internal
callers of the API).
This change adds `-deprecation` to xlint. We should consider in the
future having a task to "see" what deprecated apis we currently use for
analysis.
The syntax highlighter only supports [source,js].
Also adds a check to the rest test generator that runs during
the build that'll fail the build if it sees `[source,json]`.
Significant changes:
* AbstractQueryTestCase has moved to the test framework module, in order for query builder tests in modules and plugins
* Added support to AbstractQueryTestCase to register plugins
* Lift the restriction that only one percolator could be added per index. This validation existed in MapperService, but because the percolator moved to a module it could no longer exist there. Instead of bringing it back it was removed. This validation existed since the percolator cache only supported one percolator query per document, since the percolator cache has been removed this restriction could removed as well.
* While moving percolator tests to the new module, also removed a couple of tests for the deprecated percolate and mpercolate api. These APIs are now sugar APIs for bwc and rediect to the searvh and msearvh APIs. Some tests were still testing as if percolate and mpercolate API did the percolation, but this no longer the case and these tests could be removed.
This now requires that system properties passed to Gradle must be in the form of "-Dtests.es.*" instead of
"-Des.*". It then chops off "tests.es." and passes that as a "-E" property to Elasticsearch.
Also changed system properties:
- `tests.logger.level` became `tests.es.logger.level`
- `node.mode` became `tests.es.node.mode`
- `node.local` became `tests.es.node.local`
This change makes ES compile with java9 again, build 118.
* There are a handful of changes due to failure to determine types during compile.
* The attachment plugins which use tika needed to have tika upgraded in order to pickup fixes there for java 9.
* azure discovery and s3 repository indirectly depend on jaxb, which is no longer in the default modules. They now add a jaxb dependency externally, and make JarHell allow for this package.
This commit passes the system property tests.logger.level down to the
external nodes launched in integration tests. Specific tests that want
to override the default logging level should push down a setting to
the nodes using cluster configuration instead of pushing down a system
property to the nodes using cluster configuration.
Relates #18489
Today when parsing settings during bootstrap, we add a system property
for every Elasticsearch setting. Additionally, settings can be set via
system properties. This commit simplifies this situation.
- settings are no longer propogated to system properties
- system properties can not be used to set settings
- the "es." prefix on settings is no longer required (nor permitted)
- test logging has a dedicated system property (tests.logger.level)
Relates #18198
Two of the snippets in validate weren't working properly so they are
marked as skip and linked to this:
https://github.com/elastic/elasticsearch/issues/18254
We didn't properly handle empty parameter values. We were sending
them as the literal string "null". Now we do better and send them
as the empty string.
This commit refactors the JvmGcMonitorService so that it can be
tested. In particular, hooks are added to verify that the
JvmMonitorService correctly observes slow GC events, and that the
JvmGcMonitorService logs the correct messages.
Relates #18378
(same name and UUID) exists in the cluster state. This resolves a
situation where if an index data folder was copied into a node's data
directory while the node is running and that index had a tombstone in
the cluster state, the index would still get imported.
Closes#18250Closes#18249
This makes it much easier to apply to other projects.
Fixes to doc tests infrastructure:
* Fix comparing lists. Was totally broken.
* Fix order of actual vs expected parameters.
* Allow multiple `// TESTRESPONSE` lines with substitutions to join
into one big list of subtitutions. This makes lets the docs look
tidier.
* Exclude build from snippet scanning
* Allow subclasses of ESRestTestCase access to the admin execution context
This is a follow up to #18173 and includes adding pom generation to the
fake build-tools project, which is really just buildSrc, but builds
during normal builds.
In preparation for a unified release process, we need to be able to
generate the pom files independently of trying to actually publish. This
change adds back the maven-publish plugin just for that purpose. The
nexus plugin still exists for now, so that we do not break snapshots,
but that can be removed at a later time once snapshots are happenign
through the unified tools. Note I also changed the dir jars are written
into so that all our artifacts are under build/distributions.
This was broken recently as part of making the vagrant tasks extend
LoggedExec. This change fixes the progress logger to not be started
until we start seeing output from vagrant.
o/e/snapshots/Snapshot and o/e/snapshots/SnapshotInfo contain the same
fields and represent the same information. Snapshot was used to
maintain snapshot information to the snapshot repository, while
SnapshotInfo was used to represent the snapshot information as presented
through the REST layer. This removes the Snapshot class and combines
all uses into the SnapshotInfo class.
Closes#18167
Adds infrastructure so `gradle :docs:check` will extract tests from
snippets in the documentation and execute the tests. This is included
in `gradle check` so it should happen on CI and during a normal build.
By default each `// AUTOSENSE` snippet creates a unique REST test. These
tests are executed in a random order and the cluster is wiped between
each one. If multiple snippets chain together into a test you can annotate
all snippets after the first with `// TEST[continued]` to have the
generated tests for both snippets joined.
Snippets marked as `// TESTRESPONSE` are checked against the response
of the last action.
See docs/README.asciidoc for lots more.
Closes#12583. That issue is about catching bugs in the docs during build.
This catches *some* bugs in the docs during build which is a good start.
This change makes the vagrant tasks extend LoggedExec, so that the
entire vagrant output can be dumped on failure (and completely logged
when using --info). It should help for debugging issues like #18122.
This change fixes the generation of plugin properties files when the
version changes. Before, it would not regenerate, and running integTest
would fail with an incompatibile version error.
Gradle has a "shortcut" which omits the target and source compatibility
we set when it thinks it is not necessary (eg gradle is running on the
same version as the target compat). However, the way we compile against
java 9 is to set javac to use java 9, while gradle still runs on java 8.
This change makes -source and -target explicit for now, until these
"optimizations" can be removed from gradle.
closes#18039
Switch something from an explicit toString to Strings.toString which
is the same thing but with more code reuse.
Also renamed a constant to be CONSTANT_CASE.
* Add isSearchable and isAggregatable (collapsed to true if any of the instances of that field are searchable or aggregatable).
* Accept wildcards in field names.
* Add a section named conflicts for fields with the same name but with incompatible types (instead of throwing an exception).
`ip` fields currently fail range queries when either bound is inclusive. This
commit makes ranges also work in the exclusive case to be consistent with other
data types.
Replace with a constructor that takes StreamInput or a static method.
In one case (ValuesSourceType) we no longer need to serialize the data
at all!
Relates to #17085
Extracts all the replication logic that is done on the Primary to a separated class called ReplicationOperation. The goal
here is to make unit testing of this logic easier and in the future allow setting up tests that work directly on IndexShards
without the need for networking.
Closes#16492
The checkstyle configuration files were being accessed as resources within the project and
being converted from a URL to a File by gradle. This works when the build tools project is being
referenced as a local project. However, when using the published jar the URL points to a resource
in the jar file, that URL cannot be converted to a File object and causes the build to fail.
This change copies the files into a `checkstyle` directory in the project build folder and always uses
File objects pointing to the copied files.
This makes all numeric fields including `date`, `ip` and `token_count` use
points instead of the inverted index as a lookup structure. This is expected
to perform worse for exact queries, but faster for range queries. It also
requires less storage.
Notes about how the change works:
- Numeric mappers have been split into a legacy version that is essentially
the current mapper, and a new version that uses points, eg.
LegacyDateFieldMapper and DateFieldMapper.
- Since new and old fields have the same names, the decision about which one
to use is made based on the index creation version.
- If you try to force using a legacy field on a new index or a field that uses
points on an old index, you will get an exception.
- IP addresses now support IPv6 via Lucene's InetAddressPoint and store them
in SORTED_SET doc values using the same encoding (fixed length of 16 bytes
and sortable).
- The internal MappedFieldType that is stored by the new mappers does not have
any of the points-related properties set. Instead, it keeps setting the index
options when parsing the `index` property of mappings and does
`if (fieldType.indexOptions() != IndexOptions.NONE) { // add point field }`
when parsing documents.
Known issues that won't fix:
- You can't use numeric fields in significant terms aggregations anymore since
this requires document frequencies, which points do not record.
- Term queries on numeric fields will now return constant scores instead of
giving better scores to the rare values.
Known issues that we could work around (in follow-up PRs, this one is too large
already):
- Range queries on `ip` addresses only work if both the lower and upper bounds
are inclusive (exclusive bounds are not exposed in Lucene). We could either
decide to implement it, or drop range support entirely and tell users to
query subnets using the CIDR notation instead.
- Since IP addresses now use a different representation for doc values,
aggregations will fail when running a terms aggregation on an ip field on a
list of indices that contains both pre-5.0 and 5.0 indices.
- The ip range aggregation does not work on the new ip field. We need to either
implement range aggs for SORTED_SET doc values or drop support for ip ranges
and tell users to use filters instead. #17700Closes#16751Closes#17007Closes#11513
This commit contains the following improvements/fixes:
1. Renaming method names and variables to better reflect the purpose
of the method and the semantics of the variable.
2. For deleting indexes, replace the closed parameter passed to the
delete index/store methods with obtaining the index's state from the
IndexSettings that is already passed in.
3. Added tests to the IndexWithShadowReplicaIT suite, some of which
show issues in the shadow replica delete process that are captured in
Github issue 17695.
Closes#17638
Ryan Ernst
Simon Willnauer
Nik Everett
Jay Modi
Uwe Schindler
Adrien Grand
Tim Brooks
Martijn van Groningen
Lee Hinman
Jason Tedor
Jack Conradson
Christoph Büscher
Yannick Welsch
Luca Cavanna
Jim Ferenczi
Daniel Mitterdorfer
Alexander Reelsen
Tanguy Leroux
javanna
Boaz Leskes
Daniel Mitterdorfer
Simon Willnauer
David Pilato
Lee Hinman
Daniel Mitterdorfer
Ali Beyad
chico chen
Mike McCandless
Clinton Gormley
Robert Muir
Robert Muir
Britta Weber
Chris Earle
jaymode