There are three ways `@Test` was used. Way one:
```java
@Test
public void flubTheBlort() {
```
This way was always replaced with:
```java
public void testFlubTheBlort() {
```
Or, maybe with a better method name if I was feeling generous.
Way two:
```java
@Test(throws=IllegalArgumentException.class)
public void testFoo() {
methodThatThrows();
}
```
This way of using `@Test` is actually pretty OK, but to get the tools to ban
`@Test` entirely it can't be used. Instead:
```java
public void testFoo() {
try {
methodThatThrows();
fail("Expected IllegalArgumentException");
} catch (IllegalArgumentException e ) {
assertThat(e.getMessage(), containsString("something"));
}
}
```
This is longer but tests more than the old ways and is much more precise.
Compare:
```java
@Test(throws=IllegalArgumentException.class)
public void testFoo() {
some();
copy();
and();
pasted();
methodThatThrows();
code(); // <---- This was left here by mistake and is never called
}
```
to:
```java
@Test(throws=IllegalArgumentException.class)
public void testFoo() {
some();
copy();
and();
pasted();
try {
methodThatThrows();
fail("Expected IllegalArgumentException");
} catch (IllegalArgumentException e ) {
assertThat(e.getMessage(), containsString("something"));
}
}
```
The final use of test is:
```java
@Test(timeout=1000)
public void testFoo() {
methodThatWasSlow();
}
```
This is the most insidious use of `@Test` because its tempting but tragically
flawed. Its flaws are:
1. Hard and fast timeouts can look like they are asserting that something is
faster and even do an ok job of it when you compare the timings on the same
machine but as soon as you take them to another machine they start to be
invalid. On a slow VM both the new and old methods fail. On a super-fast
machine the slower and faster ways succeed.
2. Tests often contain slow `assert` calls so the performance of tests isn't
sure to predict the performance of non-test code.
3. These timeouts are rude to debuggers because the test just drops out from
under it after the timeout.
Confusingly, timeouts are useful in tests because it'd be rude for a broken
test to cause CI to abort the whole build after it hits a global timeout. But
those timeouts should be very very long "backstop" timeouts and aren't useful
assertions about speed.
For all its flaws `@Test(timeout=1000)` doesn't have a good replacement __in__
__tests__. Nightly benchmarks like http://benchmarks.elasticsearch.org/ are
useful here because they run on the same machine but they aren't quick to check
and it takes lots of time to figure out the regressions. Sometimes its useful
to compare dueling implementations but that requires keeping both
implementations around. All and all we don't have a satisfactory answer to the
question "what do you replace `@Test(timeout=1000)`" with. So we handle each
occurrence on a case by case basis.
For files with `@Test` this also:
1. Removes excess blank lines. They don't help anything.
2. Removes underscores from method names. Those would fail any code style
checks we ever care to run and don't add to readability. Since I did this manually
I didn't do it consistently.
3. Make sure all test method names start with `test`. Some used to end in `Test` or start
with `verify` or `check` and they were picked up using the annotation. Without the
annotation they always need to start with `test`.
4. Organizes imports using the rules we generate for Eclipse. For the most part
this just removes `*` imports which is a win all on its own. It was "required"
to quickly remove `@Test`.
5. Removes unneeded casts. This is just a setting I have enabled in Eclipse and
forgot to turn off before I did this work. It probably isn't hurting anything.
6. Removes trailing whitespace. Again, another Eclipse setting I forgot to turn
off that doesn't hurt anything. Hopefully.
7. Swaps some tests override superclass tests to make them empty with
`assumeTrue` so that the reasoning for the skips is logged in the test run and
it doesn't "look like" that thing is being tested when it isn't.
8. Adds an oxford comma to an error message.
The total test count doesn't change. I know. I counted.
```bash
git checkout master && mvn clean && mvn install | tee with_test
git no_test_annotation master && mvn clean && mvn install | tee not_test
grep 'Tests summary' with_test > with_test_summary
grep 'Tests summary' not_test > not_test_summary
diff with_test_summary not_test_summary
```
These differ somewhat because some tests are skipped based on the random seed.
The total shouldn't differ. But it does!
```
1c1
< [INFO] Tests summary: 564 suites (1 ignored), 3171 tests, 31 ignored (31 assumptions)
---
> [INFO] Tests summary: 564 suites (1 ignored), 3167 tests, 17 ignored (17 assumptions)
```
These are the core unit tests. So we dig further:
```bash
cat with_test | perl -pe 's/\n// if /^Suite/;s/.*\n// if /IGNOR/;s/.*\n// if /Assumption #/;s/.*\n// if /HEARTBEAT/;s/Completed .+?,//' | grep Suite > with_test_suites
cat not_test | perl -pe 's/\n// if /^Suite/;s/.*\n// if /IGNOR/;s/.*\n// if /Assumption #/;s/.*\n// if /HEARTBEAT/;s/Completed .+?,//' | grep Suite > not_test_suites
diff <(sort with_test_suites) <(sort not_test_suites)
```
The four tests with lower test numbers are all extend `AbstractQueryTestCase`
and all have a method that looks like this:
```java
@Override
public void testToQuery() throws IOException {
assumeTrue("test runs only when at least a type is registered", getCurrentTypes().length > 0);
super.testToQuery();
}
```
It looks like this method was being double counted on master and isn't anymore.
Closes#14028
This commit makes sure that the plugin script looks at user, group and permissions of the elasticsearch bin dir and copies them over to the plugin bin subdirectory, whatever they are, so that they get properly setup depending on how elasticsearch was installed. We also make sure that execute permissions are added for files (we already did this before).
Relates to #11016Closes#14088
Depending on how elasticsearch is installed, we have two scenarios to take into account that relate to user, group and permissions assigned to the config directory:
1) deb/rpm package: /etc/elasticsearch is root:elasticsearch 750 and the plugin script is run from root user
2) tar/zip archive: es config dir is most likely elasticsearch:elasticsearch and the plugin script is most likely run from elasticsearch user
When the plugin script copies over the plugin config dir within the es config dir, it should take care of setting the proper user, group and permissions, which vary depending on how elasticsearch was installed in the first place. Should be root:elasticsearch 750 if installed from a package, or elasticsearch:elasticsearch if installed from an archive.
This commit makes sure that the plugin script looks at user, group and permissions of the config dir and copies them over to the plugin config subdirectory, whatever they are, so that they get properly setup depending on how elasticsearch was installed in the first place. We also make sure that execute permissions are left untouched for files.
Relates to #11016Closes#14048
When generating the rpm and dep package we now set proper group (elasticsearch) and permissions (750) to the conf dir (default /etc/elasticsearch). Same for the scripts subdirectory.
Expanded the assert_file bash function to also optionally check the group of files, so we can actually test that the group was set correctly.
Relates to #11016Closes#14017
It is rarely used and was not consistently handled by different distributions anyway.
This commit also adds a test for specifying CONF_DIR when installing plugins and
starting elasticsearch.
relates to #12712 and #12954closes#5329closes#13715
package installation creates the plugin directory already so when a plugin
is installed it prints the additional line
Plugins directory [/tmp/elasticsearch/plugins] does not exist. Creating...
Plugin cli tools configures logging with whatever is in the logging.yml.
If a file appender is configured for any of the logs this will cause creation
of an empty log file. If a plugin was for example installed as root it will
create empty logs at es.home/logs.
This is problematic when for example plugins are installed as root and es is run
as service. Logs will then be created in /usr/share/elasticsearch/logs
and can later not be removed by for example dpkg -r or -purge.
To avoid this, configure the logger to use an appender that writes to the same
output that plugin cli tool does. This allows other components that are called
from Plugin cli tool to write to the same terminal that plugin cli tool writes to
by using the logging mechanism already in place.
The logging conf is not read at all pb plugin cli tool.
As a side effect, the loging level for components that are called
from the plugin command such as the jar hell check can now be configured
with -Des.logger.level which makes it easier to debug the jar hell check.
Installs javatana in vivid, emulates its on-login actions when starting
elasticsearch and verifies that elasticsearch turns off javatana.
Relates to #13813
Before this commit he tests always run bin/plugin as root which is somewhat
unrealistic and causes trouble (log files owned by root instead of
elasticsearch). After this commit `bin/plugin` runs as root when elasticsearch
is installed via the repository and as elasticsearch otherwise which is much
more realistic.
This also adds extra timeout to starting elasticsearch which is required
when all the plugins are installed. And it fixes up a problem with logging
elasticsearch's log if elasticsearch doesn't start which came up multiple
time while debugging this problem.
Also adds docs recommending running `bin/plugin` as the user that owns the
Elasticsearch files or root if installed with the packages.
Closes#13557
This adds SuSe Linux Enterprise Server 12 to the list of tested VMs.
SLES 12 is using systemd, so that the current RPM works
out of the box.
SLES12 however is already quite old and does not ship with java8, so this
required adding an opensuse repo.
Fix the vagrant tests after azure was split into 3 plugins. The tests
need to list all the plugins and some dependency so we can make sure the
plugin can be installed and uninstalled.
Until now we had a cloud-azure plugin which is providing 3 distinct features:
* discovery on Azure
* snapshot/restore on Aure
* SMB store
This commit splits the plugin by feature so people can use either one or the other or both features.
Doc is updated accordingly.
Right now we execute some debian-isms in the init.d tests. This switches to
trying both the debian and centos ways to stop services from starting
automatically.
The AWS plugin was broken into discovery-ec2 and repository-s3 so we can't
test the old plugin and must test the new ones.
Fixed some wording issues in test names.
This changes the packaging tests to start Elasticsearch with all plugins
installed and checks `_cat/plugins?h=c` against the list of plugins in
the plugins directory. If the list differs, error! So it proves that the
plugins can be installed using bin/plugin as shipped in the rpm and deb
packages.
Closes#13254
There are two other obvious ways to implement the "packages don't start
elasticsearch" checks but when you work through them they aren't as nice
as the implementation of the checks that we use now. This just adds
documentation to that effect.
We don't want either the deb or rpm package to start elasticsearch as soon
as they install nor do we want the package to register elasticsearch to
start on restart. That action is reserved for the administrator. This adds
tests for that.
Closes#13122
To do this we:
1. All the rpm based distros we test support Java 8. We just ask to install
it.
2. There is a ppa that works for the Ubuntus. We just add that for them.
3. Debian Jessie has Java 8 in its backports. We just add that repository.
4. Debian Wheezy doesn't have Java 8 easily accessible so we drop it. We
could add it back with Orache Java 8 at a later date but that will take a
few more backflips and won't support things like vagrant-cachier.
This required a ton of rebuilding of vagrant boxes so it also fixes:
1. apt-get update is run too frequently
2. Lots of weird warning messages are spit out of apt-get
3. Switch from the chef provided based images to those provided by boxcutter.
The chef images has left vagrant atlas!
Closes#13366
Until now we had a cloud-aws plugin which is providing 2 disctinct features:
* discovery on EC2
* snapshot/restore on S3
This commit splits the plugin by feature so people can use either one or the other or both features.
Doc is updated accordingly.
As we log a lot, we hit a default limit:
```
The test or suite printed 9450 bytes to stdout and stderr, even though the limit was set to 8192 bytes. Increase the limit with @Limit, ignore it completely with @SuppressSysoutChecks or run with -Dtests.verbose=true
```
(cherry picked from commit 0cb325d)
This commit adds a new smoke test for testing client as a end Java user.
It starts a cluster in `pre-integration-test` phase, then execute the client operations defined as JUnit tests within `integration-test` phase and then stop the external cluster in `post-integration-test` phase.
You can also run test classes from your IDE.
* Start an external node on your machine with `bin/elasticsearch` (note that you can test Java API regressions if you run an older or newer node version)
* Run the JUnit test. By default, it will run tests on `localhost:9300` but you can change this setting using system property `tests.cluster`. It also expects the default `cluster.name` (`elasticsearch`).
This commit also starts adding [snippets as defined by Maven](https://maven.apache.org/guides/mini/guide-snippet-macro.html) to help keeping automatically synchronized the Java reference guide with the current code.
Our documentation builder tool does not support snippets though but we will most likely support it at some point.
The shaded version of elasticsearch was built at the very beginning to avoid dependency conflicts in a specific case where:
* People use elasticsearch from Java
* People needs to embed elasticsearch jar within their own application (as it's today the only way to get a `TransportClient`)
* People also embed in their application another (most of the time older) version of dependency we are using for elasticsearch, such as: Guava, Joda, Jackson...
This conflict issue can be solved within the projects themselves by either upgrade the dependency version and use the one provided by elasticsearch or by shading elasticsearch project and relocating some conflicting packages.
Example
-------
As an example, let's say you want to use within your project `Joda 2.1` but elasticsearch `2.0.0-beta1` provides `Joda 2.8`.
Let's say you also want to run all that with shield plugin.
Create a new maven project or module with:
```xml
<groupId>fr.pilato.elasticsearch.test</groupId>
<artifactId>es-shaded</artifactId>
<version>1.0-SNAPSHOT</version>
<properties>
<elasticsearch.version>2.0.0-beta1</elasticsearch.version>
</properties>
<dependencies>
<dependency>
<groupId>org.elasticsearch</groupId>
<artifactId>elasticsearch</artifactId>
<version>${elasticsearch.version}</version>
</dependency>
<dependency>
<groupId>org.elasticsearch.plugin</groupId>
<artifactId>shield</artifactId>
<version>${elasticsearch.version}</version>
</dependency>
</dependencies>
```
And now shade and relocate all packages which conflicts with your own application:
```xml
<build>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-shade-plugin</artifactId>
<version>2.4.1</version>
<executions>
<execution>
<phase>package</phase>
<goals>
<goal>shade</goal>
</goals>
<configuration>
<relocations>
<relocation>
<pattern>org.joda</pattern>
<shadedPattern>fr.pilato.thirdparty.joda</shadedPattern>
</relocation>
</relocations>
</configuration>
</execution>
</executions>
</plugin>
</plugins>
</build>
```
You can create now a shaded version of elasticsearch + shield by running `mvn clean install`.
In your project, you can now depend on:
```xml
<dependency>
<groupId>fr.pilato.elasticsearch.test</groupId>
<artifactId>es-shaded</artifactId>
<version>1.0-SNAPSHOT</version>
</dependency>
<dependency>
<groupId>joda-time</groupId>
<artifactId>joda-time</artifactId>
<version>2.1</version>
</dependency>
```
Build then your TransportClient as usual:
```java
TransportClient client = TransportClient.builder()
.settings(Settings.builder()
.put("path.home", ".")
.put("shield.user", "username:password")
.put("plugin.types", "org.elasticsearch.shield.ShieldPlugin")
)
.build();
client.addTransportAddress(new InetSocketTransportAddress(new InetSocketAddress("localhost", 9300)));
// Index some data
client.prepareIndex("test", "doc", "1").setSource("foo", "bar").setRefresh(true).get();
SearchResponse searchResponse = client.prepareSearch("test").get();
```
If you want to use your own version of Joda, then import for example `org.joda.time.DateTime`. If you want to access to the shaded version (not recommended though), import `fr.pilato.thirdparty.joda.time.DateTime`.
You can run a simple test to make sure that both classes can live together within the same JVM:
```java
CodeSource codeSource = new org.joda.time.DateTime().getClass().getProtectionDomain().getCodeSource();
System.out.println("unshaded = " + codeSource);
codeSource = new fr.pilato.thirdparty.joda.time.DateTime().getClass().getProtectionDomain().getCodeSource();
System.out.println("shaded = " + codeSource);
```
It will print:
```
unshaded = (file:/path/to/joda-time-2.1.jar <no signer certificates>)
shaded = (file:/path/to/es-shaded-1.0-SNAPSHOT.jar <no signer certificates>)
```
This PR also removes fully-loaded module.
By the way, the project can now build with Maven 3.3.3 so we can relax a bit our maven policy.
This cleans up deb, rpm, systemd, and sysvinit tests:
1. Move skip_not_rpm, skip_not_dpkg, etc to the setup() methods for faster
runtime and cleaner code.
2. Removed lots of needless invocations of `run`
3. Created install_package for use in the systemd and sysvinit tests.
4. Removed lots of needless stderr to stdout redirects.
Closes#13075
Related to #13074
Virtualbox is the default virtualization provier for vagrant but folks
override that from time to time. If they do then the build will fail because
the boxes used by the build don't usually support non-virtualbox providers.
Closes#13217
commons-lang really is only used by some core classes to join strings or modiy arrays.
It's not worth carrying the dependency. This commit removes the dependency on commons-lang
entirely.
Now we are using short names for artifactId (see #12879) so we don't need anymore to transform long names `elasticsearch-pluginname` to short names `pluginname` in ant script when we install a plugin.
Modify also convert-plugin-name
Clean up remaining plugins with old format
And fix vagrant tests
In #12853 we actually introduced a test regression. Now as we wait for yellow instead of green, we might have some pending tasks.
This commit simplify all that and only checks the number of nodes within the cluster.
In plugins, we are using non consistent naming. We use `elasticsearch-cloud-aws` as the artifactId, which generates a jar file called `elasticsearch-cloud-aws-VERSION.jar`.
But when you want to install the plugin, you will end up with a shorter name for the plugin `cloud-aws`.
```
bin/plugin install cloud-aws
```
This commit changes that and use consistent names for `artifactId`, so `finalName`.
Also changed maven names.
Indeed, we check within the test suite that we have not unassigned shards.
But when the test starts on my machine I get:
```
[elasticsearch] [2015-08-13 12:03:18,801][INFO ][org.elasticsearch.cluster.routing.allocation.decider] [Kehl of Tauran] low disk watermark [85%] exceeded on [eLujVjWAQ8OHdhscmaf0AQ][Jackhammer] free: 59.8gb[12.8%], replicas will not be assigned to this node
```
```
2> REPRODUCE WITH: mvn verify -Pdev -Dskip.unit.tests -Dtests.seed=2AE3A3B7B13CE3D6 -Dtests.class=org.elasticsearch.smoketest.SmokeTestMultiIT -Dtests.method="test {yaml=smoke_test_multinode/10_basic/cluster health basic test, one index}" -Des.logger.level=ERROR -Dtests.assertion.disabled=false -Dtests.security.manager=true -Dtests.heap.size=512m -Dtests.locale=ar_YE -Dtests.timezone=Asia/Hong_Kong -Dtests.rest.suite=smoke_test_multinode
FAILURE 38.5s | SmokeTestMultiIT.test {yaml=smoke_test_multinode/10_basic/cluster health basic test, one index} <<<
> Throwable #1: java.lang.AssertionError: expected [2xx] status code but api [cluster.health] returned [408 Request Timeout] [{"cluster_name":"prepare_release","status":"yellow","timed_out":true,"number_of_nodes":2,"number_of_data_nodes":2,"active_primary_shards":3,"active_shards":3,"relocating_shards":0,"initializing_shards":0,"unassigned_shards":3,"delayed_unassigned_shards":0,"number_of_pending_tasks":0,"number_of_in_flight_fetch":0,"task_max_waiting_in_queue_millis":0,"active_shards_percent_as_number":50.0}]
```
We don't check anymore if we have unassigned shards and we wait for `yellow` status instead of `green`.
Closes#12852.
This move the `murmur3` field to the `mapper-murmur3` plugin and fixes its
defaults so that values will not be indexed by default, as the only purpose
of this field is to speed up `cardinality` aggregations on high-cardinality
string fields, which only requires doc values.
I also removed the `rehash` option from the `cardinality` aggregation as it
doesn't bring much value (rehashing is cheap) and allowed to remove the
coupling between the `cardinality` aggregation and the `murmur3` field.
Close#12874
1. Move `clean_before_test` to the first test so its more explicit.
2. Move `skip_not_tar_gz` to setup because it was run first in every test.
3. Remove calls to `run` that only check the status. Its simpler to just
execute the command. Its better because std-out will be captured and replayed
on error.
4. Switch from `su` to `sudo` because `su` was breaking `bats`'s error
reporting.
In the bats test ES_CLEAN_BEFORE_TEST was used to clean the environment
before running the tests. Unfortunately the tests don't work unless you
specify it every time. This removes that option and always runs the clean.
Build fails with maven 3.3.1 and 3.3.3. To reproduce, install one of the 3.3.x versions of maven and run `mvn clean verify` in the root directory of the project. The build will fail in the QA: Smoke Test Shaded Jar module with the following error:
```
Started J0 PID(99979@flea.local).
Suite: org.elasticsearch.shaded.test.ShadedIT
2> NOTE: reproduce with: ant test -Dtestcase=ShadedIT -Dtests.method=testJodaIsNotOnTheCP -Dtests.seed=2F4D23A7462CF921 -Dtests.locale= -Dtests.timezone=Asia/Baku -Dtests.asserts=true -Dtests.file.encoding=UTF-8
FAILURE 0.06s | ShadedIT.testJodaIsNotOnTheCP <<<
> Throwable #1: junit.framework.AssertionFailedError: Expected an exception but the test passed: java.lang.ClassNotFoundException
> at __randomizedtesting.SeedInfo.seed([2F4D23A7462CF921:3A9404F1F69FD80]:0)
> at junit.framework.Assert.fail(Assert.java:57)
> at java.lang.Thread.run(Thread.java:745)
2> NOTE: reproduce with: ant test -Dtestcase=ShadedIT -Dtests.method=testGuavaIsNotOnTheCP -Dtests.seed=2F4D23A7462CF921 -Dtests.locale= -Dtests.timezone=Asia/Baku -Dtests.asserts=true -Dtests.file.encoding=UTF-8
FAILURE 0.01s | ShadedIT.testGuavaIsNotOnTheCP <<<
> Throwable #1: junit.framework.AssertionFailedError: Expected an exception but the test passed: java.lang.ClassNotFoundException
> at __randomizedtesting.SeedInfo.seed([2F4D23A7462CF921:C2502FD54D83433D]:0)
> at junit.framework.Assert.fail(Assert.java:57)
> at java.lang.Thread.run(Thread.java:745)
2> NOTE: reproduce with: ant test -Dtestcase=ShadedIT -Dtests.method=testjsr166eIsNotOnTheCP -Dtests.seed=2F4D23A7462CF921 -Dtests.locale= -Dtests.timezone=Asia/Baku -Dtests.asserts=true -Dtests.file.encoding=UTF-8
FAILURE 0.01s | ShadedIT.testjsr166eIsNotOnTheCP <<<
> Throwable #1: junit.framework.AssertionFailedError: Expected an exception but the test passed: java.lang.ClassNotFoundException
> at __randomizedtesting.SeedInfo.seed([2F4D23A7462CF921:35593286F4269392]:0)
> at junit.framework.Assert.fail(Assert.java:57)
> at java.lang.Thread.run(Thread.java:745)
2> NOTE: leaving temporary files on disk at: /Users/Shared/Jenkins/Home/workspace/elasticsearch-master/qa/smoke-test-shaded/target/J0/temp/org.elasticsearch.shaded.test.ShadedIT_2F4D23A7462CF921-001
2> NOTE: test params are: codec=CheapBastard, sim=DefaultSimilarity, locale=, timezone=Asia/Baku
2> NOTE: Mac OS X 10.10.4 x86_64/Oracle Corporation 1.8.0_25 (64-bit)/cpus=8,threads=1,free=482137936,total=514850816
2> NOTE: All tests run in this JVM: [ShadedIT]
Completed [1/1] in 6.61s, 5 tests, 3 failures <<< FAILURES!
Tests with failures:
- org.elasticsearch.shaded.test.ShadedIT.testJodaIsNotOnTheCP
- org.elasticsearch.shaded.test.ShadedIT.testGuavaIsNotOnTheCP
- org.elasticsearch.shaded.test.ShadedIT.testjsr166eIsNotOnTheCP
```
Please note that build doesn't fail with maven 3.2.x and it doesn't fail if mvn command is executed inside the qa/smoke-test-shaded directory. Only when the build is started from the root directory the error above can be observed.
The reason is because of the shaded version which depends on elasticsearch core.
When Maven build the module only, then elasticsearch core is not added to the dependency tree.
```sh
mvn dependency:tree -pl :smoke-test-shaded
```
```
[INFO] --- maven-dependency-plugin:2.8:tree (default-cli) @ smoke-test-shaded ---
[INFO] org.elasticsearch.qa:smoke-test-shaded:jar:2.0.0-beta1-SNAPSHOT
[INFO] +- org.elasticsearch.distribution.shaded:elasticsearch:jar:2.0.0-beta1-SNAPSHOT:compile
[INFO] | +- org.apache.lucene:lucene-core:jar:5.2.1:compile
[INFO] | +- org.apache.lucene:lucene-backward-codecs:jar:5.2.1:compile
[INFO] | +- org.apache.lucene:lucene-analyzers-common:jar:5.2.1:compile
[INFO] | +- org.apache.lucene:lucene-queries:jar:5.2.1:compile
[INFO] | +- org.apache.lucene:lucene-memory:jar:5.2.1:compile
[INFO] | +- org.apache.lucene:lucene-highlighter:jar:5.2.1:compile
[INFO] | +- org.apache.lucene:lucene-queryparser:jar:5.2.1:compile
[INFO] | +- org.apache.lucene:lucene-sandbox:jar:5.2.1:compile
[INFO] | +- org.apache.lucene:lucene-suggest:jar:5.2.1:compile
[INFO] | +- org.apache.lucene:lucene-misc:jar:5.2.1:compile
[INFO] | +- org.apache.lucene:lucene-join:jar:5.2.1:compile
[INFO] | +- org.apache.lucene:lucene-grouping:jar:5.2.1:compile
[INFO] | +- org.apache.lucene:lucene-spatial:jar:5.2.1:compile
[INFO] | \- com.spatial4j:spatial4j:jar:0.4.1:compile
[INFO] +- org.hamcrest:hamcrest-all:jar:1.3:test
[INFO] \- org.apache.lucene:lucene-test-framework:jar:5.2.1:test
[INFO] +- org.apache.lucene:lucene-codecs:jar:5.2.1:test
[INFO] +- com.carrotsearch.randomizedtesting:randomizedtesting-runner:jar:2.1.16:test
[INFO] +- junit:junit:jar:4.11:test
[INFO] \- org.apache.ant🐜jar:1.8.2:test
```
But if shaded plugin is involved during the build, it modifies the `projectArtifactMap`:
```sh
mvn dependency:tree -pl org.elasticsearch.distribution.shaded:elasticsearch,:smoke-test-shaded
```
```
[INFO] --- maven-dependency-plugin:2.8:tree (default-cli) @ smoke-test-shaded ---
[INFO] org.elasticsearch.qa:smoke-test-shaded:jar:2.0.0-beta1-SNAPSHOT
[INFO] +- org.elasticsearch.distribution.shaded:elasticsearch:jar:2.0.0-beta1-SNAPSHOT:compile
[INFO] | \- org.elasticsearch:elasticsearch:jar:2.0.0-beta1-SNAPSHOT:compile
[INFO] | +- org.apache.lucene:lucene-backward-codecs:jar:5.2.1:compile
[INFO] | +- org.apache.lucene:lucene-analyzers-common:jar:5.2.1:compile
[INFO] | +- org.apache.lucene:lucene-queries:jar:5.2.1:compile
[INFO] | +- org.apache.lucene:lucene-memory:jar:5.2.1:compile
[INFO] | +- org.apache.lucene:lucene-highlighter:jar:5.2.1:compile
[INFO] | +- org.apache.lucene:lucene-queryparser:jar:5.2.1:compile
[INFO] | | \- org.apache.lucene:lucene-sandbox:jar:5.2.1:compile
[INFO] | +- org.apache.lucene:lucene-suggest:jar:5.2.1:compile
[INFO] | | \- org.apache.lucene:lucene-misc:jar:5.2.1:compile
[INFO] | +- org.apache.lucene:lucene-join:jar:5.2.1:compile
[INFO] | | \- org.apache.lucene:lucene-grouping:jar:5.2.1:compile
[INFO] | +- org.apache.lucene:lucene-spatial:jar:5.2.1:compile
[INFO] | | \- com.spatial4j:spatial4j:jar:0.4.1:compile
[INFO] | +- com.google.guava:guava:jar:18.0:compile
[INFO] | +- com.carrotsearch:hppc:jar:0.7.1:compile
[INFO] | +- joda-time:joda-time:jar:2.8:compile
[INFO] | +- org.joda:joda-convert:jar:1.2:compile
[INFO] | +- com.fasterxml.jackson.core:jackson-core:jar:2.5.3:compile
[INFO] | +- com.fasterxml.jackson.dataformat:jackson-dataformat-smile:jar:2.5.3:compile
[INFO] | +- com.fasterxml.jackson.dataformat:jackson-dataformat-yaml:jar:2.5.3:compile
[INFO] | | \- org.yaml:snakeyaml:jar:1.12:compile
[INFO] | +- com.fasterxml.jackson.dataformat:jackson-dataformat-cbor:jar:2.5.3:compile
[INFO] | +- io.netty:netty:jar:3.10.3.Final:compile
[INFO] | +- com.ning:compress-lzf:jar:1.0.2:compile
[INFO] | +- com.tdunning:t-digest:jar:3.0:compile
[INFO] | +- org.hdrhistogram:HdrHistogram:jar:2.1.6:compile
[INFO] | +- org.apache.commons:commons-lang3:jar:3.3.2:compile
[INFO] | +- commons-cli:commons-cli:jar:1.3.1:compile
[INFO] | \- com.twitter:jsr166e:jar:1.1.0:compile
[INFO] +- org.hamcrest:hamcrest-all:jar:1.3:test
[INFO] \- org.apache.lucene:lucene-test-framework:jar:5.2.1:test
[INFO] +- org.apache.lucene:lucene-codecs:jar:5.2.1:test
[INFO] +- org.apache.lucene:lucene-core:jar:5.2.1:compile
[INFO] +- com.carrotsearch.randomizedtesting:randomizedtesting-runner:jar:2.1.16:test
[INFO] +- junit:junit:jar:4.11:test
[INFO] \- org.apache.ant🐜jar:1.8.2:test
```
A fix could consist of fixing something on Maven side. Probably something changed in a recent version and introduced this "issue" but it might be not really an issue. More a fix.
There are two workarounds:
1) exclude manually elasticsearch core from shaded version in smoke-test-shaded module and add manually each lucene lib needed by elasticsearch
2) add a new `elasticsearch-lucene` (lucene) POM module which simply declares all needed lucene libs in subprojects (such as the smoke tester one).
I choose the later.
Closes#12791.
This adds the infrastrucutre to run integration tests with more than one node.
* it adds relevant macros and targets to integration-tests.xml to start unicast nodes
* there is a qa/smoke-test-multinode project that simulates such a setup
this commit is soely the infrastructure and doesn't hook up any projects to use this.
For reliability and stability reasons this should be used with care and only if it's really
needed.
Closes#12718
the default classloader. It had all kinds of leniency in how the
classname was found, and simply cannot work with plugins having isolated
classloaders.
This change removes that method. Some of the uses of it were for custom
extension points, like custom repository or discovery types. A lot were
just there to plugin mock implementations for tests. For the settings
that were legitimate, all now support plugins adding the given setting
via onModule. For those that were specific to tests for mocks, they now
use Classes.loadClass (a helper around Class.forName). This is a
temporary measure until (in a future PR) tests can change the
implementation via package private statics.
I also removed a number of unnecessary intermediate modules, added a
"jvm-example" plugin that can be filled in in the future as a smoke test
for breaking plugins, and gave some documentation to "spawn" modules
interface.
closes#12643closes#12656
If we run the tests as a reactor build we reference the dependencies
before they are shaded. This causes problems since we verify that unshaded versions
of a transitive dependency is not present. This commit moves the verification tests
into the integration test that always runs with the shaded version of the jar.
This creates a module in qa called vagrant that can be run if you have
vagrant and virtualbox installed and will run the packaging tests in trusty
and centos-7.0. You can ask it to run tests in other linuxes. This is the full
list:
* precise aka Ubuntu 12.04
* trusty aka Ubuntu 14.04
* vivid aka Ubuntun 15.04
* wheezy aka Debian 7, the current debian oldstable distribution
* jessie aka Debian 8, the current debina stable distribution
* centos-6
* centos-7
* fedora-22
* oel-7
There is lots of documentation on how to do this in the TESTING.asciidoc.
Closes#12611
Moved the license checker config into the parent pom, and overrede
the license dir/target-to-check in distributions/pom.
Disabled the license checker explicitly for projects which run integration
tests but have no licenses dir:
* core
* distribution
* qa
* plugins/delete-by-query
* plugins/mapper-size
* plugins/site-example
Closes#12752Closes#12754
this commit adds a simple integration test that starts a
node from a shaded jar, indexes a doc and retrieves it. It
also has some basic unittests that try to load shaded classes and ensure
that their counterpart is not in the classpath.
Closes#12711
This is one of our esoteric metadata mappers so I think we should distribute
it in a plugin rather than in elasticsearch core.
This introduces one limitation: the value of the `_size` parameter is not
retrievable for documents that are only in the transaction log.
We have a smoke_test_plugins.py, but its a bit slow, not integrated
into our build, etc.
I converted this into an integration test. It is definitely uglier
but more robust and fast (e.g. 20 seconds time to verify).
Also there is refactoring of existing integ tests logic, like printing
out commands we execute and stuff
Nik Everett
javanna
Jason Tedor
David Pilato
Britta Weber
Britta Weber
Robert Muir
Alexander Reelsen
Ryan Ernst
André Carvalho
Simon Willnauer
Adrien Grand
Clinton Gormley