* Add rolling upgrade multi cluster test module (#38277)
This test starts 2 clusters, each with 3 nodes.
First the leader cluster is started and tests are run against it and
then the follower cluster is started and tests execute against this two cluster.
Then the follower cluster is upgraded, one node at a time.
After that the leader cluster is upgraded, one node at a time.
Every time a node is upgraded tests are ran while both clusters are online.
(and either leader cluster has mixed node versions or the follower cluster)
This commit only tests CCR index following, but could be used for CCS tests as well.
In particular for CCR, unidirectional index following is tested during a rolling upgrade.
During the test several indices are created and followed in the leader cluster before or
while the follower cluster is being upgraded.
This tests also verifies that attempting to follow an index in the upgraded cluster
from the not upgraded cluster fails. After both clusters are upgraded following the
index that previously failed should succeed.
Relates to #37231 and #38037
* Filter out upgraded version index settings when starting index following (#38838)
The `index.version.upgraded` and `index.version.upgraded_string` are likely
to be different between leader and follower index. In the event that
a follower index gets restored on a upgraded node while the leader index
is still on non-upgraded nodes.
Closes#38835
Instead of using `WarningsHandler.PERMISSIVE`, we only match warnings
that are due to types removal.
This PR also renames `allowTypeRemovalWarnings` to `allowTypesRemovalWarnings`.
Relates to #37920.
* Rename integTest to bwcTestSample for bwc test projects
This change renames the `integTest` task to `bwcTestSample` for projects
testing bwc to make it possible to run all the bwc tests that check
would run without running on bwc tests.
This change makes it possible to add a new PR check on backports to make
sure these don't break BWC tests in master.
* Rename task as per PR
This commit adds the 7.1 version constant to the 7.x branch.
Co-authored-by: Andy Bristol <andy.bristol@elastic.co>
Co-authored-by: Tim Brooks <tim@uncontended.net>
Co-authored-by: Christoph Büscher <cbuescher@posteo.de>
Co-authored-by: Luca Cavanna <javanna@users.noreply.github.com>
Co-authored-by: markharwood <markharwood@gmail.com>
Co-authored-by: Ioannis Kakavas <ioannis@elastic.co>
Co-authored-by: Nhat Nguyen <nhat.nguyen@elastic.co>
Co-authored-by: David Roberts <dave.roberts@elastic.co>
Co-authored-by: Jason Tedor <jason@tedor.me>
Co-authored-by: Alpar Torok <torokalpar@gmail.com>
Co-authored-by: David Turner <david.turner@elastic.co>
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
Co-authored-by: Tim Vernum <tim@adjective.org>
Co-authored-by: Albert Zaharovits <albert.zaharovits@gmail.com>
We have had various reports of problems caused by the maxRetryTimeout
setting in the low-level REST client. Such setting was initially added
in the attempts to not have requests go through retries if the request
already took longer than the provided timeout.
The implementation was problematic though as such timeout would also
expire in the first request attempt (see #31834), would leave the
request executing after expiration causing memory leaks (see #33342),
and would not take into account the http client internal queuing (see #25951).
Given all these issues, it seems that this custom timeout mechanism
gives little benefits while causing a lot of harm. We should rather rely
on connect and socket timeout exposed by the underlying http client
and accept that a request can overall take longer than the configured
timeout, which is the case even with a single retry anyways.
This commit removes the `maxRetryTimeout` setting and all of its usages.
`waitForRollUpJob` is an assertBusy that waits for the rollup job
to appear in the tasks list, and waits for it to be a certain state.
However, there was a null check around the state assertion, which meant
if the job _was_ null, the assertion would be skipped, and the
assertBusy would pass withouot an exception. This could then lead to
downstream assertions to fail because the job was not actually ready,
or in the wrong state.
This changes the test to assert the job is not null, so the assertBusy
operates as intended.
For some users, the built in authorization mechanism does not fit their
needs and no feature that we offer would allow them to control the
authorization process to meet their needs. In order to support this,
a concept of an AuthorizationEngine is being introduced, which can be
provided using the security extension mechanism.
An AuthorizationEngine is responsible for making the authorization
decisions about a request. The engine is responsible for knowing how to
authorize and can be backed by whatever mechanism a user wants. The
default mechanism is one backed by roles to provide the authorization
decisions. The AuthorizationEngine will be called by the
AuthorizationService, which handles more of the internal workings that
apply in general to authorization within Elasticsearch.
In order to support external authorization services that would back an
authorization engine, the entire authorization process has become
asynchronous, which also includes all calls to the AuthorizationEngine.
The use of roles also leaked out of the AuthorizationService in our
existing code that is not specifically related to roles so this also
needed to be addressed. RequestInterceptor instances sometimes used a
role to ensure a user was not attempting to escalate their privileges.
Addressing this leakage of roles meant that the RequestInterceptor
execution needed to move within the AuthorizationService and that
AuthorizationEngines needed to support detection of whether a user has
more privileges on a name than another. The second area where roles
leaked to the user is in the handling of a few privilege APIs that
could be used to retrieve the user's privileges or ask if a user has
privileges to perform an action. To remove the leakage of roles from
these actions, the AuthorizationService and AuthorizationEngine gained
methods that enabled an AuthorizationEngine to return the response for
these APIs.
Ultimately this feature is the work included in:
#37785#37495#37328#36245#38137#38219Closes#32435
`CreateIndexRequest#source(Map<String, Object>, ... )`, which is used when
deserializing index creation requests, accidentally accepts mappings that are
nested twice under the type key (as described in the bug report #38266).
This in turn causes us to be too lenient in parsing typeless mappings. In
particular, we accept the following index creation request, even though it
should not contain the type key `_doc`:
```
PUT index?include_type_name=false
{
"mappings": {
"_doc": {
"properties": { ... }
}
}
}
```
There is a similar issue for both 'put templates' and 'put mappings' requests
as well.
This PR makes the minimal changes to detect and reject these typed mappings in
requests. It does not address #38266 generally, or attempt a larger refactor
around types in these server-side requests, as I think this should be done at a
later time.
Renames the following settings to remove the mention of `zen` in their names:
- `discovery.zen.hosts_provider` -> `discovery.seed_providers`
- `discovery.zen.ping.unicast.concurrent_connects` -> `discovery.seed_resolver.max_concurrent_resolvers`
- `discovery.zen.ping.unicast.hosts.resolve_timeout` -> `discovery.seed_resolver.timeout`
- `discovery.zen.ping.unicast.hosts` -> `discovery.seed_addresses`
This PR removes the temporary change we made to the yml test harness in #37285
to automatically set `include_type_name` to `true` in index creation requests
if it's not already specified. This is possible now that the vast majority of
index creation requests were updated to be typeless in #37611. A few additional
tests also needed updating here.
Additionally, this PR updates the test harness to set `include_type_name` to
`false` in index creation requests when communicating with 6.x nodes. This
mirrors the logic added in #37611 to allow for typeless document write requests
in test set-up code. With this update in place, we can remove many references
to `include_type_name: false` from the yml tests.
With #37566 we have introduced the ability to merge multiple search responses into one. That makes it possible to expose a new way of executing cross-cluster search requests, that makes CCS much faster whenever there is network latency between the CCS coordinating node and the remote clusters. The coordinating node can now send a single search request to each remote cluster, which gets reduced by each one of them. from + size results are requested to each cluster, and the reduce phase in each cluster is non final (meaning that buckets are not pruned and pipeline aggs are not executed). The CCS coordinating node performs an additional, final reduction, which produces one search response out of the multiple responses received from the different clusters.
This new execution path will be activated by default for any CCS request unless a scroll is provided or inner hits are requested as part of field collapsing. The search API accepts now a new parameter called ccs_minimize_roundtrips that allows to opt-out of the default behaviour.
Relates to #32125
The certgen, certutil and saml-metadata tools did not correctly return
their exit code to the calling shell.
These commands now explicitly exit with the code that was returned
from the main(args, terminal) method.
This commit adds deprecation warnings for index actions
and search actions when executed via watcher. Unit and
integration tests updated accordingly.
relates #35190
Made the test tolerant to index upgrade being run
in between the old/mixed/upgraded portions. This
can occur because the rolling upgrade tests all
share the same indices.
Fixes#37763
* Testing conventions now checks for tests in main
This is the last outstanding feature of the old NamingConventionsTask,
so time to remove it.
* PR review
This commit removes the Index Audit Output type, following its deprecation
in 6.7 by 8765a31d4e6770. It also adds the migration notice (settings notice).
In general, the problem with the index audit output is that event indexing
can be slower than the rate with which audit events are generated,
especially during the daily rollovers or the rolling cluster upgrades.
In this situation audit events will be lost which is a terrible failure situation
for an audit system.
Besides of the settings under the `xpack.security.audit.index` namespace, the
`xpack.security.audit.outputs` setting has also been deprecated and will be
removed in 7. Although explicitly configuring the logfile output does not touch
any deprecation bits, this setting is made redundant in 7 so this PR deprecates
it as well.
Relates #29881
This change moves the update to the results index mappings
from the open job action to the code that starts the
autodetect process.
When a rolling upgrade is performed we need to update the
mappings for already-open jobs that are reassigned from an
old version node to a new version node, but the open job
action is not called in this case.
Closes#37607
The integ tests currently use the raw zip project name as the
distribution type. This commit simplifies this specification to be
"default" or "oss". Whether zip or tar is used should be an internal
implementation detail of the integ test setup, which can (in the future)
be platform specific.
Removes all sensitive settings (passwords, auth tokens, urls, etc...) for
watcher notifications accounts. These settings were deprecated (and
herein removed) in favor of their secure sibling that is set inside the
elasticsearch keystore. For example:
`xpack.notification.email.account.<id>.smtp.password`
is no longer a valid setting, and it is replaced by
`xpack.notification.email.account.<id>.smtp.secure_password`
This change fixes the setup of the SSL configuration for the test
openldap realm. The configuration was missing the realm identifier so
the SSL settings being used were just the default JDK ones that do not
trust the certificate of the idp fixture.
See #37591
Migrate ml job and datafeed config of open jobs and update
the parameters of the persistent tasks as they become unallocated
during a rolling upgrade. Block allocation of ml persistent tasks
until the configs are migrated.
This commit removes the fallback for SSL settings. While this may be
seen as a non user friendly change, the intention behind this change
is to simplify the reasoning needed to understand what is actually
being used for a given SSL configuration. Each configuration now needs
to be explicitly specified as there is no global configuration or
fallback to some other configuration.
Closes#29797
Added warnings checks to existing tests
Added “defaultTypeIfNull” to DocWriteRequest interface so that Bulk requests can override a null choice of document type with any global custom choice.
Related to #35190
* ML: add migrate anomalies assistant
* adjusting failure handling for reindex
* Fixing request and tests
* Adding tests to blacklist
* adjusting test
* test fix: posting data directly to the job instead of relying on datafeed
* adjusting API usage
* adding Todos and adjusting endpoint
* Adding types to reindexRequest
* removing unreliable "live" data test
* adding index refresh to test
* adding index refresh to test
* adding index refresh to yaml test
* fixing bad exists call
* removing todo
* Addressing remove comments
* Adjusting rest endpoint name
* making service have its own logger
* adjusting validity check for newindex names
* fixing typos
* fixing renaming
In Lucene 8 searches can skip non-competitive hits if the total hit count is not requested.
It is also possible to track the number of hits up to a certain threshold. This is a trade off to speed up searches while still being able to know a lower bound of the total hit count. This change adds the ability to set this threshold directly in the track_total_hits search option. A boolean value (true, false) indicates whether the total hit count should be tracked in the response. When set as an integer this option allows to compute a lower bound of the total hits while preserving the ability to skip non-competitive hits when enough matches have been collected.
Relates #33028
The phrase "missing authentication token" is historic and is based
around the use of "AuthenticationToken" objects inside the Realm code.
However, now that we have a TokenService and token API, this message
would sometimes lead people in the wrong direction and they would try
and generate a "token" for authentication purposes when they would
typically just need a username:password Basic Auth header.
This change replaces the word "token" with "credentials".
Commit #36786 updated docs and strings to reference transport.port instead of
transport.tcp.port. However, this breaks backwards compatibility tests
as the tests rely on string configurations and transport.port does not
exist prior to 6.6. This commit reverts the places were we reference
transport.tcp.port for tests. This work will need to be reintroduced in
a backwards compatible way.
This is related to #36652. In 7.0 we plan to deprecate a number of
settings that make reference to the concept of a tcp transport. We
mostly just have a single transport type now (based on tcp). Settings
should only reference tcp if they are referring to socket options. This
commit updates the settings in the docs. And removes string usages of
the old settings. Additionally it adds a missing remote compress setting
to the docs.
* [ML] Job and datafeed mappings with index template (#32719)
Index mappings for the configuration documents
* [ML] Job config document CRUD operations (#32738)
* [ML] Datafeed config CRUD operations (#32854)
* [ML] Change JobManager to work with Job config in index (#33064)
* [ML] Change Datafeed actions to read config from the config index (#33273)
* [ML] Allocate jobs based on JobParams rather than cluster state config (#33994)
* [ML] Return missing job error when .ml-config is does not exist (#34177)
* [ML] Close job in index (#34217)
* [ML] Adjust finalize job action to work with documents (#34226)
* [ML] Job in index: Datafeed node selector (#34218)
* [ML] Job in Index: Stop and preview datafeed (#34605)
* [ML] Delete job document (#34595)
* [ML] Convert job data remover to work with index configs (#34532)
* [ML] Job in index: Get datafeed and job stats from index (#34645)
* [ML] Job in Index: Convert get calendar events to index docs (#34710)
* [ML] Job in index: delete filter action (#34642)
This changes the delete filter action to search
for jobs using the filter to be deleted in the index
rather than the cluster state.
* [ML] Job in Index: Enable integ tests (#34851)
Enables the ml integration tests excluding the rolling upgrade tests and a lot of fixes to
make the tests pass again.
* [ML] Reimplement established model memory (#35500)
This is the 7.0 implementation of a master node service to
keep track of the native process memory requirement of each ML
job with an associated native process.
The new ML memory tracker service works when the whole cluster
is upgraded to at least version 6.6. For mixed version clusters
the old mechanism of established model memory stored on the job
in cluster state was used. This means that the old (and complex)
code to keep established model memory up to date on the job object
has been removed in 7.0.
Forward port of #35263
* [ML] Need to wait for shards to replicate in distributed test (#35541)
Because the cluster was expanded from 1 node to 3 indices would
initially start off with 0 replicas. If the original node was
killed before auto-expansion to 1 replica was complete then
the test would fail because the indices would be unavailable.
* [ML] DelayedDataCheckConfig index mappings (#35646)
* [ML] JIndex: Restore finalize job action (#35939)
* [ML] Replace Version.CURRENT in streaming functions (#36118)
* [ML] Use 'anomaly-detector' in job config doc name (#36254)
* [ML] Job In Index: Migrate config from the clusterstate (#35834)
Migrate ML configuration from clusterstate to index for closed jobs
only once all nodes are v6.6.0 or higher
* [ML] Check groups against job Ids on update (#36317)
* [ML] Adapt to periodic persistent task refresh (#36633)
* [ML] Adapt to periodic persistent task refresh
If https://github.com/elastic/elasticsearch/pull/36069/files is
merged then the approach for reallocating ML persistent tasks
after refreshing job memory requirements can be simplified.
This change begins the simplification process.
* Remove AwaitsFix and implement TODO
* [ML] Default search size for configs
* Fix TooManyJobsIT.testMultipleNodes
Two problems:
1. Stack overflow during async iteration when lots of
jobs on same machine
2. Not effectively setting search size in all cases
* Use execute() instead of submit() in MlMemoryTracker
We don't need a Future to wait for completion
* [ML][TEST] Fix NPE in JobManagerTests
* [ML] JIindex: Limit the size of bulk migrations (#36481)
* [ML] Prevent updates and upgrade tests (#36649)
* [FEATURE][ML] Add cluster setting that enables/disables config migration (#36700)
This commit adds a cluster settings called `xpack.ml.enable_config_migration`.
The setting is `true` by default. When set to `false`, no config migration will
be attempted and non-migrated resources (e.g. jobs, datafeeds) will be able
to be updated normally.
Relates #32905
* [ML] Snapshot ml configs before migrating (#36645)
* [FEATURE][ML] Split in batches and migrate all jobs and datafeeds (#36716)
Relates #32905
* SQL: Fix translation of LIKE/RLIKE keywords (#36672)
* SQL: Fix translation of LIKE/RLIKE keywords
Refactor Like/RLike functions to simplify internals and improve query
translation when chained or within a script context.
Fix#36039Fix#36584
* Fixing line length for EnvironmentTests and RecoveryTests (#36657)
Relates #34884
* Add back one line removed by mistake regarding java version check and
COMPAT jvm parameter existence
* Do not resolve addresses in remote connection info (#36671)
The remote connection info API leads to resolving addresses of seed
nodes when invoked. This is problematic because if a hostname fails to
resolve, we would not display any remote connection info. Yet, a
hostname not resolving can happen across remote clusters, especially in
the modern world of cloud services with dynamically chaning
IPs. Instead, the remote connection info API should be providing the
configured seed nodes. This commit changes the remote connection info to
display the configured seed nodes, avoiding a hostname resolution. Note
that care was taken to preserve backwards compatibility with previous
versions that expect the remote connection info to serialize a transport
address instead of a string representing the hostname.
* [Painless] Add boxed type to boxed type casts for method/return (#36571)
This adds implicit boxed type to boxed types casts for non-def types to create asymmetric casting relative to the def type when calling methods or returning values. This means that a user calling a method taking an Integer can call it with a Byte, Short, etc. legally which matches the way def works. This creates consistency in the casting model that did not previously exist.
* SNAPSHOTS: Adjust BwC Versions in Restore Logic (#36718)
* Re-enables bwc tests with adjusted version conditions now that #36397 enables concurrent snapshots in 6.6+
* ingest: fix on_failure with Drop processor (#36686)
This commit allows a document to be dropped when a Drop processor
is used in the on_failure fork of the processor chain.
Fixes#36151
* Initialize startup `CcrRepositories` (#36730)
Currently, the CcrRepositoryManger only listens for settings updates
and installs new repositories. It does not install the repositories that
are in the initial settings. This commit, modifies the manager to
install the initial repositories. Additionally, it modifies the ccr
integration test to configure the remote leader node at startup, instead
of using a settings update.
* [TEST] fix float comparison in RandomObjects#getExpectedParsedValue
This commit fixes a test bug introduced with #36597. This caused some
test failure as stored field values comparisons would not work when CBOR
xcontent type was used.
Closes#29080
* [Geo] Integrate Lucene's LatLonShape (BKD Backed GeoShapes) as default `geo_shape` indexing approach (#35320)
This commit exposes lucene's LatLonShape field as the
default type in GeoShapeFieldMapper. To use the new
indexing approach, simply set "type" : "geo_shape" in
the mappings without setting any of the strategy, precision,
tree_levels, or distance_error_pct parameters. Note the
following when using the new indexing approach:
* geo_shape query does not support querying by
MULTIPOINT.
* LINESTRING and MULTILINESTRING queries do not
yet support WITHIN relation.
* CONTAINS relation is not yet supported.
The tree, precision, tree_levels, distance_error_pct,
and points_only parameters are deprecated.
* TESTS:Debug Log. IndexStatsIT#testFilterCacheStats
* ingest: support default pipelines + bulk upserts (#36618)
This commit adds support to enable bulk upserts to use an index's
default pipeline. Bulk upsert, doc_as_upsert, and script_as_upsert
are all supported.
However, bulk script_as_upsert has slightly surprising behavior since
the pipeline is executed _before_ the script is evaluated. This means
that the pipeline only has access the data found in the upsert field
of the script_as_upsert. The non-bulk script_as_upsert (existing behavior)
runs the pipeline _after_ the script is executed. This commit
does _not_ attempt to consolidate the bulk and non-bulk behavior for
script_as_upsert.
This commit also adds additional testing for the non-bulk behavior,
which remains unchanged with this commit.
fixes#36219
* Fix duplicate phrase in shrink/split error message (#36734)
This commit removes a duplicate "must be a" from the shrink/split error
messages.
* Deprecate types in get_source and exist_source (#36426)
This change adds a new untyped endpoint `{index}/_source/{id}` for both the
GET and the HEAD methods to get the source of a document or check for its
existance. It also adds deprecation warnings to RestGetSourceAction that emit
a warning when the old deprecated "type" parameter is still used. Also updating
documentation and tests where appropriate.
Relates to #35190
* Revert "[Geo] Integrate Lucene's LatLonShape (BKD Backed GeoShapes) as default `geo_shape` indexing approach (#35320)"
This reverts commit 5bc7822562.
* Enhance Invalidate Token API (#35388)
This change:
- Adds functionality to invalidate all (refresh+access) tokens for all users of a realm
- Adds functionality to invalidate all (refresh+access)tokens for a user in all realms
- Adds functionality to invalidate all (refresh+access) tokens for a user in a specific realm
- Changes the response format for the invalidate token API to contain information about the
number of the invalidated tokens and possible errors that were encountered.
- Updates the API Documentation
After back-porting to 6.x, the `created` field will be removed from master as a field in the
response
Resolves: #35115
Relates: #34556
* Add raw sort values to SearchSortValues transport serialization (#36617)
In order for CCS alternate execution mode (see #32125) to be able to do the final reduction step on the CCS coordinating node, we need to serialize additional info in the transport layer as part of each `SearchHit`. Sort values are already present but they are formatted according to the provided `DocValueFormat` provided. The CCS node needs to be able to reconstruct the lucene `FieldDoc` to include in the `TopFieldDocs` and `CollapseTopFieldDocs` which will feed the `mergeTopDocs` method used to reduce multiple search responses (one per cluster) into one.
This commit adds such information to the `SearchSortValues` and exposes it through a new getter method added to `SearchHit` for retrieval. This info is only serialized at transport and never printed out at REST.
* Watcher: Ensure all internal search requests count hits (#36697)
In previous commits only the stored toXContent version of a search
request was using the old format. However an executed search request was
already disabling hit counts. In 7.0 hit counts will stay enabled by
default to allow for proper migration.
Closes#36177
* [TEST] Ensure shard follow tasks have really stopped.
Relates to #36696
* Ensure MapperService#getAllMetaFields elements order is deterministic (#36739)
MapperService#getAllMetaFields returns an array, which is created out of
an `ObjectHashSet`. Such set does not guarantee deterministic hash
ordering. The array returned by its toArray may be sorted differently
at each run. This caused some repeatability issues in our tests (see #29080)
as we pick random fields from the array of possible metadata fields,
but that won't be repeatable if the input array is sorted differently at
every run. Once setting the tests seed, hppc picks that up and the sorting is
deterministic, but failures don't repeat with the seed that gets printed out
originally (as a seed was not originally set).
See also https://issues.carrot2.org/projects/HPPC/issues/HPPC-173.
With this commit, we simply create a static sorted array that is used for
`getAllMetaFields`. The change is in production code but really affects
only testing as the only production usage of this method was to iterate
through all values when parsing fields in the high-level REST client code.
Anyways, this seems like a good change as returning an array would imply
that it's deterministically sorted.
* Expose Sequence Number based Optimistic Concurrency Control in the rest layer (#36721)
Relates #36148
Relates #10708
* [ML] Mute MlDistributedFailureIT
* Deprecate types in index API
- deprecate type-based constructors of IndexRequest
- update tests to use typeless IndexRequest constructors
- no yaml tests as they have been already added in #35790
Relates to #35190
An issue was introduced due to the merge of authorization_realms with
the change to use Affix Settings for realms.
The ".type" setting no longer exists as the type is now part of the
setting key.
* Upgrae plugin to latest and expose udp
* Explicit check for windows
* Rename the properties for the port numbers
* Tasks for pre and pos container actions
Redeprecates the `/_xpack/rollup` endpoints in favor of `/_rollup`.
When we cleanup the rollup in a cluster containing 6.x nodes we need to
use `/_xpack/rollup` instead of `/_rollup` because the 6.x nodes don't
know about `/_rollup`. In those cases we must ignore the deprecation
warnings that the 7.0 node will return for the end point.
Closes#36044
* This commit is part of our plan to deprecate and ultimately remove the use of _xpack in the REST APIs.
- REST API docs
- HLRC docs and doc tests
- Handle REST actions with deprecation warnings
- Changed endpoints in rest-api-spec and relevant file names
For each API, the following updates were made:
- Add deprecation warnings to `Rest*Action`, plus tests in `Rest*ActionTests`.
- For each REST yml test, make sure there is one version without types, and another legacy version that retains types (called *_with_types.yml).
- Deprecate relevant methods on the Java HLRC requests/ responses.
- Update documentation (for both the REST API and Java HLRC).
Moves all remaining (rolling-upgrade and mixed-version) REST tests to use Zen2. To avoid adding
extra configuration, it relies on Zen2 being set as the default discovery type. This required a few
smaller changes in other tests. I've removed AzureMinimumMasterNodesTests which tests Zen1
functionality and dates from a time where host providers were not configurable and each cloud
plugin had its own discovery.type, subclassing the ZenDiscovery class. I've also adapted a few tests
which were unnecessarily adding addTestZenDiscovery = false for the same legacy reasons. Finally,
this also moves the unconfigured-node-name REST test to Zen2, testing the auto-bootstrapping
functionality in development mode when no discovery configuration is provided.
Set rest_total_hits_as_int in search requests only on the new cluster,
the old cluster can be on a version older than don't support this
parameter (< 6.6) and total hits is not an object in 6x anyway.
Closes#36291
This commit changes the format of the `hits.total` in the search response to be an object with
a `value` and a `relation`. The `value` indicates the number of hits that match the query and the
`relation` indicates whether the number is accurate (in which case the relation is equals to `eq`)
or a lower bound of the total (in which case it is equals to `gte`).
This change also adds a parameter called `rest_total_hits_as_int` that can be used in the
search APIs to opt out from this change (retrieve the total hits as a number in the rest response).
Note that currently all search responses are accurate (`track_total_hits: true`) or they don't contain
`hits.total` (`track_total_hits: true`). We'll add a way to get a lower bound of the total hits in a
follow up (to allow numbers to be passed to `track_total_hits`).
Relates #33028
Closes#35435
- make it easier to add additional testing tasks with the proper configuration and add some where they were missing.
- mute or fix failing tests
- add a check as part of testing conventions to find classes not included in any testing task.
If the randomly selected port was already in use the Kerberos
tests would fail. This commit adds check to see if the network
port is available and if not continue to find one for KDC server.
If it does not find port after 100 retries it throws an exception.
Closes#34261
This change adds the support for rest_total_hits_as_int
in the watcher search inputs. Setting this parameter in the request
will transform the search response to contain the total hits as
a number (instead of an object).
Note that this parameter is currently a noop since #35849 is not
merged.
Closes#36008
In #30241 Realm settings were changed, but the Kerberos realm settings
were not registered correctly. This change fixes the registration of
those Kerberos settings.
Also adds a new integration test that ensures every internal realm can
be configured in a test cluster.
Also fixes the QA test for kerberos.
Resolves: #35942
Right now using the `GET /_tasks/<taskid>` API and causing a task to opt
in to saving its result after being completed requires permissions on
the `.tasks` index. When we built this we thought that that was fine,
but we've since moved towards not leaking details like "persisting task
results after the task is completed is done by saving them into an index
named `.tasks`." A more modern way of doing this would be to save the
tasks into the index "under the hood" and to have APIs to manage the
saved tasks. This is the first step down that road: it drops the
requirement to have permissions to interact with the `.tasks` index when
fetching task statuses and when persisting statuses beyond the lifetime
of the task.
In particular, this moves the concept of the "origin" of an action into
a more prominent place in the Elasticsearch server. The origin of an
action is ignored by the server, but the security plugin uses the origin
to make requests on behalf of a user in such a way that the user need
not have permissions to perform these actions. It *can* be made to be
fairly precise. More specifically, we can create an internal user just
for the tasks API that just has permission to interact with the `.tasks`
index. This change doesn't do that, instead, it uses the ubiquitus
"xpack" user which has most permissions because it is simpler. Adding
the tasks user is something I'd like to get to in a follow up change.
Instead, the majority of this change is about moving the "origin"
concept from the security portion of x-pack into the server. This should
allow any code to use the origin. To keep the change managable I've also
opted to deprecate rather than remove the "origin" helpers in the
security code. Removing them is almost entirely mechanical and I'd like
to that in a follow up as well.
Relates to #35573
Clients can use the Kerberos V5 security mechanism and when it
used this to establish security context it failed to do so as
Elasticsearch server only accepted Spengo mechanism.
This commit adds support to accept Kerberos V5 credentials
over spnego.
Closes#34763
- Add the authentication realm and lookup realm name and type in the response for the _authenticate API
- The authentication realm is set as the lookup realm too (instead of setting the lookup realm to null or empty ) when no lookup realm is used.
This commit removes the use of AbstractComponent in xpack where it was
still being extended. It has been replaced with explicit logger
declarations.
See #34488
* ML: Removing result_finalization_window && overlapping_buckets
* Reverting bad method deletions
* Setting to current before backport to try and get a green build
* fixing testBuildAutodetectCommand test
* disabling bwc tests for backport
* Deprecate types in count requests.
* Move RestCountAction to the 'search' package.
* Deprecate types in multi search requests.
* Add tests for types deprecation in the _search endpoint.
The DefaultAuthenticationFailureHandler has a deprecated constructor
that was present to prevent a breaking change to custom realm plugin
authors in 6.x. This commit removes the constructor and its uses.
* DISCOVERY: Fix RollingUpgradeTests
* Don't manually manage min master nodes if not necessary
* Remove some dead code
* Allow for manually supplying list of seed nodes
* Closes#35178
Ensure that Watcher is correctly started and stopped between tests for
SmokeTestWatcherWithSecurityIT,
SmokeTestWatcherWithSecurityClientYamlTestSuiteIT,
SmokeTestWatcherTestSuiteIT, WatcherRestIT,
XDocsClientYamlTestSuiteIT, and XPackRestIT
The change here is to throw an `AssertionError` instead of `break;` to
allow the `assertBusy()` to continue to busy wait until the desired
state is reached.
closes#33291, closes#29877, closes#34462, closes#30705, closes#34448
Adds basic rolling upgrade tests to check that lifecycles are still recognizable between rolling cluster upgrades and managed indices stay managed.
This is a placeholder for discussing types of checks so they are ready once we backported
This is a re-boot of the previous PR against index-lifecycle that needed to be
reverted due to CI bwc issues. #32828
With this change, `Version` no longer carries information about the qualifier,
we still need a way to show the "display version" that does have both
qualifier and snapshot. This is now stored by the build and red from `META-INF`.
This moves all Realm settings to an Affix definition.
However, because different realm types define different settings
(potentially conflicting settings) this requires that the realm type
become part of the setting key.
Thus, we now need to define realm settings as:
xpack.security.authc.realms:
file.file1:
order: 0
native.native1:
order: 1
- This is a breaking change to realm config
- This is also a breaking change to custom security realms (SecurityExtension)
Fixes
```
Could not determine the dependencies of task ':x-pack:qa:full-cluster-restart:with-system-key:v5.6.13#oldClusterTestCluster#node1.copyBwcPlugins'.
```
Stop passing `Settings` to `AbstractComponent`'s ctor. This allows us to
stop passing around `Settings` in a *ton* of places. While this change
touches many files, it touches them all in fairly small, mechanical
ways, doing a few things per file:
1. Drop the `super(settings);` line on everything that extends
`AbstractComponent`.
2. Drop the `settings` argument to the ctor if it is no longer used.
3. If the file doesn't use `logger` then drop `extends
AbstractComponent` from it.
4. Clean up all compilation failure caused by the `settings` removal
and drop any now unused `settings` isntances and method arguments.
I've intentionally *not* removed the `settings` argument from a few
files:
1. TransportAction
2. AbstractLifecycleComponent
3. BaseRestHandler
These files don't *need* `settings` either, but this change is large
enough as is.
Relates to #34488
The java yaml test runner supports sending request headers, yet not all clients support headers. This commit makes sure that we enforce adding a skip section with feature "headers" whenever headers are used in a do section as part of a test. That decreases the chance for new tests to break client builds due to the missing skip section.
Closes#34650
Move `x-pack/qa/smoke-test-graph-with-security` to
`x-pack/plugin/graph/qa/security` which should make it easier to run all
of the tests with a single command. It also lines up the directories
more closely with newer projects like cross cluster replication.
Moves `x-pack/qa/sql/*` into `x-pack/plugin/sql/qa` to make it simpler
to run all of the sql tests. This lines up with how newer projects like
cross cluster replication are testing themselves.
This commit filters out usage of deprecated tzs by tests. These are
tested separately and should not require checking for warnings on any
test using random timezones.
closes#34188
Previously, `Mapper` was returning an incorrect plan which resulted in an
```
SQLFeatureNotSupportedException: Found 1 problem(s)
line 1:8: Unexecutable item
```
Queries with a `WHERE` and/or `HAVING` clause which results in NO_MATCH
are now handled correctly and return 0 rows.
Fixes: #34613
Co-authored-by: Costin Leau <costin.leau@gmail.com>
* Adding stack_monitoring_agent role
* Fixing checkstyle issues
* Adding tests for new role
* Tighten up privileges around index templates
* s/stack_monitoring_user/remote_monitoring_collector/ + remote_monitoring_user
* Fixing checkstyle violation
* Fix test
* Removing unused field
* Adding missed code
* Fixing data type
* Update Integration Test for new builtin user
Implemented null handling for both the value tested but also for
values inside the list of values tested against.
The null handling is implemented for local processors, painless scripts
and Lucene Terms queries making it available for `IN` expressions occuring
in `SELECT`, `WHERE` and `HAVING` clauses.
Closes: #34582
#33708 introduced a strict deprecation mode that makes a REST request
fail if there is a warning header in the response returned by
Elasticsearch (usually a deprecation message signaling that a feature
or a field has been deprecated).
This change adds the strict deprecation mode into the REST integration
tests, and makes the tests fail if a deprecated feature is used. Also
any test using a deprecated feature has been modified to pass the build.
The YAML integration tests already analyzed HTTP warnings so they do
not use this mode, keeping their "expected vs actual" behavior.
We should delete a job by directly talking to the allocated
task and telling it to shutdown. Today we shut down a job
via the persistent task framework. This is not ideal because,
while the job has been removed from the persistent task
CS, the allocated task continues to live until it gets the
shutdown message.
This means a user can delete a job, immediately delete
the rollup index, and then see new documents appear in
the just-deleted index. This happens because the indexer
in the allocated task is still running and indexes a few
more documents before getting the shutdown command.
In this PR, the transport action is changed to a TransportTasksAction,
and we invoke onCancelled() directly on the matching job.
The race condition still exists after this PR (albeit less likely),
but this was a precursor to fixing the issue and a self-contained
chunk of code. A second PR will followup to fix the race itself.
Extend querying support on multiple indices from being strictly
identical to being just compatible.
Use FieldCapabilities API (extended through #33803) for mapping merging.
Close#31837#31611
Implement the functionality to translate the
`field IN (value1, value2,...)` expressions to proper Lucene queries
or painless script or local processors depending on the use case.
The `IN` expression can be used in SELECT, WHERE and HAVING clauses.
Closes: #32955
`CONVERT` works exactly like cast with slightly different syntax:
`CONVERT(<value>, <data_type)` as opposed to `CAST(<value> AS <data_type>)`
Moreover it support format of the MS-SQL data types `SQL_<type>`,
e.g.: `SQL_INTEGER`
Closes: #34513
Make SQL aware of missing and/or unmapped fields treating them as NULL
Make _all_ functions and operators null-safe aware, including when used
in filtering or sorting contexts
Add missing and null-safe doc value extractor
Modify dataset to have null fields spread around (in groups of 10)
Enforce missing last and unmapped_type inside sorting
Consolidate Predicate templating and declaration
Add support for Like/RLike in scripting
Generalize NULLS LAST/FIRST
Introduce early schema declaration for CSV spec tests: to keep the doc
snippets in place (introduce schema:: prefix for declaration)
upfront.
Fix#32079
A constant can now be used outside aggregation only queries.
Don't skip an ES query in case of constants-only selects.
Loosen the binary pipe restriction of being used only in aggregation queries.
Fixes https://github.com/elastic/elasticsearch/issues/31863
This moves the rollup cleanup code for http tests from the high level rest
client into the test framework and then entirely removes the rollup cleanup
code for http tests that lived in x-pack. This is nice because it
consolidates the cleanup into one spot, automatically invokes the cleanup
without the test having to know that it is "about rollup", and should allow
us to run the rollup docs tests.
Part of #34530
Security caches the result of role lookups and negative lookups are
cached indefinitely. In the case of transient failures this leads to a
bad experience as the roles could truly exist. The CompositeRolesStore
needs to know if a failure occurred in one of the roles stores in order
to make the appropriate decision as it relates to caching. In order to
provide this information to the CompositeRolesStore, the return type of
methods to retrieve roles has changed to a new class,
RoleRetrievalResult. This class provides the ability to pass back an
exception to the roles store. This exception does not mean that a
request should be failed but instead serves as a signal to the roles
store that missing roles should not be cached and neither should the
combined role if there are missing roles.
As part of this, the negative lookup cache was also changed from an
unbounded cache to a cache with a configurable limit.
Relates #33205
* New OCTET_LENGTH function
* Changed the way the FunctionRegistry stores functions, considering the alphabetic ordering by name
* Added documentation for the RANDOM function
Since all calls to `ESLoggerFactory` outside of the logging package were
deprecated, it seemed like it'd simplify things to migrate all of the
deprecated calls and declare `ESLoggerFactory` to be package private.
This does that.
Previously, parsing an arithmetic expression with `*` and no spaces,
e.g.: `2*i` threw a parsing exception as the grammar rule for
tableIdentifier was clashing with the rule for arithmetic operator `*`.
This issue comes already in the lexer and the left part of the
expression (in our example `2*`) was recognised as a
TABLE_IDENTIFIER token.
The solution adopted is to allow the `*` wildcard in the table name
only if it's surrounded with double quotes, e.g.: `"my*index"`
Closes: #33957
We use wrap code in `// tag` and `//end` to include it in our docs. Our
current docs style wraps code snippets in a box that is only wide enough
for 76 characters and adds a horizontal scroll bar for wider snippets
which makes the snippet much harder to read. This adds a checkstyle check
that looks for java code that is included in the docs and is wider than
that 76 characters so all snippets fit into the box. It solves many of
the failures that this catches but suppresses many more. I will clean
those up in a follow up change.
Centralize and simplify the script generation between operators and functions which are currently decoupled. As part of this process most predicates (<, <=, etc...) were made ScalarFunction as their purpose and functionality is quite similar (see % and MOD functions).
Renamed ProcessDefinition to Pipe
Add ScriptWeaver as a mixin-in interface for script customization
Add logic for equals/lte/lt
Improve BinaryOperator/expression toString
Minimize duplication across string functions
Close#33975
This change cleans up "unused variable" warnings. There are several cases were we
most likely want to suppress the warnings (especially in the client documentation test
where the snippets contain many unused variables). In a lot of cases the unused
variables can just be deleted though.
Two issues are resolved:
1. The `value_type` should be either long or double in case of numeric.
2. The key label for the aggregate filter (having) was duplicate of an aggr key label.
Fixes: #33520
* Changed the format of the String functions documentation page.
* Adopted the same format for Math functions, but completely changed the examples.
* Added missing documentation for Math functions.
This commit reverts most of #33157 as it introduces another race
condition and breaks a common case of watcher, when the first watch is
added to the system and the index does not exist yet.
This means, that the index will be created, which triggers a reload, but
during this time the put watch operation that triggered this is not yet
indexed, so that both processes finish roughly add the same time and
should not overwrite each other but act complementary.
This commit reverts the logic of cleaning out the ticker engine watches
on start up, as this is done already when the execution is paused -
which also gets paused on the cluster state listener again, as we can be
sure here, that the watches index has not yet been created.
This also adds a new test, that starts a one node cluster and emulates
the case of a non existing watches index and a watch being added, which
should result in proper execution.
Closes#33320
* Added TRUNCATE function, modified ROUND to accept two parameters instead of one. Made the second parameter optional for both functions.
* Added documentation for both functions.
Previously multiple comma separated lists of options where not
recognized correctly which resulted in only the last of them
to be taked into account, e.g.:
For the following query:
SELECT * FROM test WHERE QUERY('search', 'default_field=foo', 'default_operator=and')"
only the `default_operator=and` was finally passed to the ES query.
Fixes: #32602
Changes the format of log events in the audit logfile.
It also changes the filename suffix from `_access` to `_audit`.
The new entry format is consistent with Elastic Common Schema.
Entries are formatted as JSON with no nested objects and field
names have a dotted syntax. Moreover, log entries themselves
are not spaced by commas and there is exactly one entry per line.
In addition, entry fields are ordered, unlike a typical JSON doc,
such that a human would not strain his eyes over jumbled
fields from one line to the other; the order is defined in the log4j2
properties file.
The implementation utilizes the log4j2's `StringMapMessage`.
This means that the application builds the log event as a map
and the log4j logic (the appender's layout) handle the format
internally. The layout, such as the set of printed fields and their
order, can be changed at runtime without restarting the node.
We have a test dependency on Apache Mina when using SimpleKdcServer
for testing Kerberos. When checking for LDAP backend connectivity,
the code checks for deadlocks which require additional security
permissions accessClassInPackage.sun.reflect. As this is only for
test and we do not want to add security permissions to production,
this commit moves these tests and related classes to
x-pack evil-tests where they can run with security manager disabled.
The plan is to handle the security manager exception in the upstream issue
DIRMINA-1093
and then once the release is available to run these tests with security
manager enabled.
Closes#32739
This change removes the wrapping of the created field in the put user
response. The created field was added as a top level field in #32332,
while also still being wrapped within the `user` object of the
response. Since the value is available in both formats in 6.x, we can
remove the wrapped version for 7.0.
Previously, when an non-pruned cast (casting as a different
data type) got applied on a table column in the `SELECT` clause,
the name of the result column didn't contain the target data type
of the cast, e.g.:
SELECT CAST(MAX(salary) AS DOUBLE) FROM "test_emp"
returned as column name:
CAST(MAX(salary))
instead of:
CAST(MAX(salary) AS DOUBLE)
Closes#33571
* Added more tests for trivial casts that are pruned
This commit adds settings upgraders for the search.remote.* settings
that can be in the cluster state to automatically upgrade these settings
to cluster.remote.*. Because of the infrastructure that we have here,
these settings can be upgraded when recovering the cluster state, but
also when a user tries to make a dynamic update for these settings.
These logs are incredibly verbose, and it makes chasing normal failures
burdensome. This commit removes the debug logging, which can be
reenabled again if needed.
Previously, when an arithmetic function got applied on a
table column in the `SELECT` clause, the name of the result
column contained weird characters used internally when
processing the SQL statement e.g.:
SELECT CHAR(emp_no % 10000) FROM "test_emp"
returned:
CHAR((emp_no{f}#14) % 10000))
as the column name instead of:
CHAR((emp_no) % 10000))
Also, fix an issue that causes a ClassCastException to be thrown
when using functions where both arguments are literals.
Closes#31869Closes#33461
Split function section into multiple chapters
Add String functions
Add (small) section on Conversion/Cast functions
Add missing aggregation functions
Enable documentation testing (was disabled by accident). While at it,
fix failing tests
Improve spec tests to allow multi-line queries (useful for docs)
Add ability to ignore a spec test (name should end with -Ignore)
With features like CCR building on the CCS infrastructure, the settings
prefix search.remote makes less sense as the namespace for these remote
cluster settings than does a more general namespace like
cluster.remote. This commit replaces these settings with cluster.remote
with a fallback to the deprecated settings search.remote.
Extend SHOW TABLES, DESCRIBE and SHOW COLUMNS to support table
identifiers not just SQL LIKE pattern.
This allows both Elasticsearch-style multi-index patterns and SQL LIKE.
To disambiguate between the two (as the " vs ' can be easy to miss),
the grammar now requires LIKE keyword as a prefix for all LIKE-like
patterns.
Also added some docs comparing the two types of patterns.
Fix#33294
We need to wait for the job to fully initialize and start before
we can attempt to stop it. If we don't, it's possible for the stop
API to be called before the persistent task is fully loaded and it'll
throw an exception.
Closes#32773
In the previous commit where SmokeTestWatcherWithSecurityIT tests were
muted, I added the incorrect issue numbers. This commit fixes this. The
issue for the tests is #33320.
* Tests for JdbcResultSet
* Added VARCHAR conversion for different types
* Made error messages consistent: they now contain both the type that fails to be converted and the value itself
Authorization Realms allow an authenticating realm to delegate the task
of constructing a User object (with name, roles, etc) to one or more
other realms.
E.g. A client could authenticate using PKI, but then delegate to an LDAP
realm. The LDAP realm performs a "lookup" by principal, and then does
regular role-mapping from the discovered user.
This commit includes:
- authorization_realm support in the pki, ldap, saml & kerberos realms
- docs for authorization_realms
- checks that there are no "authorization chains"
(whereby "realm-a" delegates to "realm-b", but "realm-b" delegates to "realm-c")
Authorization realms is a platinum feature.
We need to limit the search request aggregations to whole multiples
of the configured interval for both histogram and date_histogram.
Otherwise, agg buckets won't overlap with the rolled up buckets
and the results will be incorrect.
For histogram, the validation is very simple: request must be >= the config,
and modulo evenly.
Dates are more tricky.
- If both request and config are fixed dates, we can convert to millis
and treat them just like the histo
- If both are calendar, we make sure the request is >= the config with
a static lookup map that ranks the calendar values relatively. All
calendar units are "singles", so they are evenly divisible already
- We disallow any other combination (one fixed, one calendar, etc)
This commit removes the unused User class from the protocol project.
This class was originally moved into protocol in preparation for moving
more request and response classes, but given the change in direction
for the HLRC this is no longer needed. Additionally, this change also
changes the package name for the User object in x-pack/plugin/core to
its original name.
This change adds support for the client credentials grant type to the
token api. The client credentials grant allows for a client to
authenticate with the authorization server and obtain a token to access
as itself. Per RFC 6749, a refresh token should not be included with
the access token and as such a refresh token is not issued when the
client credentials grant is used.
The addition of the client credentials grant will allow users
authenticated with mechanisms such as kerberos or PKI to obtain a token
that can be used for subsequent access.
* Adding new MonitoredSystem for APM server
* Teaching Monitoring template utils about APM server monitoring indices
* Documenting new monitoring index for APM server
* Adding monitoring index template for APM server
* Copy pasta typo
* Removing metrics.libbeat.config section from mapping
* Adding built-in user and role for APM server user
* Actually define the role :)
* Adding missing import
* Removing index template and system ID for apm server
* Shortening line lengths
* Updating expected number of built-in users in integration test
* Removing "system" from role and user names
* Rearranging users to make tests pass
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `x-pack/qa/saml-idp-tests` and
`x-pack/qa/security-setup-password-tests` projects to use the new
versions.
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `x-pack/qa/smoke-test-monitoring-with-watcher`,
`x-pack/qa/smoke-test-watcher`, and
`x-pack/qa/smoke-test-watcher-with-security` projects to use the new
versions.
This reworks how we configure the `shadow` plugin in the build. The major
change is that we no longer bundle dependencies in the `compile` configuration,
instead we bundle dependencies in the new `bundle` configuration. This feels
more right because it is a little more "opt in" rather than "opt out" and the
name of the `bundle` configuration is a little more obvious.
As an neat side effect of this, the `runtimeElements` configuration used when
one project depends on another now contains exactly the dependencies needed
to run the project so you no longer need to reference projects that use the
shadow plugin like this:
```
testCompile project(path: ':client:rest-high-level', configuration: 'shadow')
```
You can instead use the much more normal:
```
testCompile "org.elasticsearch.client:elasticsearch-rest-high-level-client:${version}"
```
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `x-pack/qa/audit-tests`,
`x-pack/qa/ml-disabled`, and `x-pack/qa/multi-node` projects to use the
new versions.
This commit moves the ML QA tests to be a sub-project of ML. The purpose
of this refactoring is to enable ML developers to run
:x-pack:plugin:ml:check and run the vast majority of a ML tests with a
single command (this still does not contain the ML REST tests, nor the
upgrade tests). This simplifies local development for faster iteration.
There are two problems with the scheduler engine today. Both relate to
listeners that throw.
The first problem is that any triggered listener that throws a plain old
exception will cause no additional listeners to be triggered for the
event, and will also cause the scheduler to never be invoked again. This
leads to lost events and is bad.
The second problem is that any triggered listener that throws an error
of the fatal kind will not lead to that error because caught by the
uncaught exception handler. This is because the triggered listener is
executed as a future task under a scheduled thread pool executor. A
throwable there goes caught by the JDK framework and set as the outcome
on the future task. Since we never inspect these tasks for their
outcomes, nor is there a good place to do this, we have to handle these
errors ourselves. To do this, we catch them and dispatch them to the
uncaught exception handler via a forked thread. This is similar to our
handling in Netty.
As the multibucket feature was merged in, this test hit a side effect
which means buckets trailing an anomaly could become anomalous.
This commit fixes the problem by filtering low score records when
we request them.
Elasticsearch versions earlier than 6.4.0 cannot properly run in a
FIPS 140 JVM. This commit ensures that we use a non-FIPS JVM for
nodes that we spin up in BWC tests even when we're testing FIPS.
* ML: fix updating opened jobs scheduled events (#31651)
* Adding UpdateParamsTests license header
* Adding integration test and addressing PR comments
* addressing test and job names
This change cleans up some methods in the CharArrays class from x-pack, which
includes the unification of char[] to utf8 and utf8 to char[] conversions that
intentionally do not use strings. There was previously an implementation in
x-pack and in the reloading of secure settings. The method from the reloading
of secure settings was adopted as it handled more scenarios related to the
backing byte and char buffers that were used to perform the conversions. The
cleaned up class is moved into libs/core to allow it to be used by requests
that will be migrated to the high level rest client.
Relates #32332
This removes custom Response classes that extend `AcknowledgedResponse` and do nothing, these classes are not needed and we can directly use the non-abstract super-class instead.
While this appears to be a large PR, no code has actually changed, only class names have been changed and entire classes removed.
We only upgrade the ID when the state is saved in one of four scenarios:
- when we reach a checkpoint (every 50 pages)
- when we run out of data
- when explicitly stopped
- on failure
The test was relying on the pre-upgrade to finish, save state and then
the post-upgrade to start, hit the end of data and upgrade ID. THEN
get the new doc and apply the new ID.
But I think this is vulnerable to timing issues. If the pre-upgrade
portion shutdown before it saved the state, when restarting we would run
through all the data from the beginning with the old ID, meaning both
docs would still have the old scheme.
This change makes the pre-upgrade wait for the job to go back to STARTED
so that we know it persisted the end point. Post-upgrade, it stops and
restarts the job to ensure the state was persisted and the ID upgraded.
That _should_ rule out the above timing issue.
Closes#32773
* Clear Job#finished_time when it is opened (#32605)
* not returning failure when Job#finished_time is not reset
* Changing error log string and source string
The qa tests with security haven't actually gone as far as testing security roles yet, so this is a start in the hopes of both bringing the tests into the ilm plugin
Skip the comparative tests using lowercasing/uppercasing against H2 (which considers the Locale).
ES-SQL is, so far, ignoring the Locale.
Still, the same queries are executed against ES-SQL alone and results asserted to be correct.
The Apache Http components support for Spnego scheme
uses canonical name by default.
Also when resolving host name, on centos by default
there are other aliases so adding them to the
DelegationPermission.
Closes#32498
Bumping down the version to 6.4 since the backport is complete. Also
adds some missing version checks to the bwc tests to make sure it
only runs on the correct versions
Previously, we were using a simple CRC32 for the IDs of rollup documents.
This is a very poor choice however, since 32bit IDs leads to collisions
between documents very quickly.
This commit moves Rollups over to a 128bit ID. The ID is a concatenation
of all the keys in the document (similar to the rolling CRC before),
hashed with 128bit Murmur3, then base64 encoded. Finally, the job
ID and a delimiter (`$`) are prepended to the ID.
This gurantees that there are 128bits per-job. 128bits should
essentially remove all chances of collisions, and the prepended
job ID means that _if_ there is a collision, it stays "within"
the job.
BWC notes:
We can only upgrade the ID scheme after we know there has been a good
checkpoint during indexing. We don't rely on a STARTED/STOPPED
status since we can't guarantee that resulted from a real checkpoint,
or other state. So we only upgrade the ID after we have reached
a checkpoint state during an active index run, and only after the
checkpoint has been confirmed.
Once a job has been upgraded and checkpointed, the version increments
and the new ID is used in the future. All new jobs use the
new ID from the start
These tests ensure, that the basic watch APIs are tested in the rolling
upgrade tests. After initially adding a watch, the tests try to get,
execute, deactivate and activate a watch. Watcher stats are tested as
well, and an own java based test has been added for restarting, as that
requires waiting for a state change. Watcher history is also checked.
Closes#31216
The User class has been moved to the protocol project for upcoming work
to add more security APIs to the high level rest client. As part of
this change, the toString method no longer uses a custom output method
from MetadataUtils and instead just relies on Java's toString
implementation.
This commit does the following:
- renames index-lifecycle plugin to ilm
- modifies the endpoints to ilm instead of index_lifecycle
- drops _xpack from the endpoints
- drops a few duplicate endpoints
Added support for string manipulating functions with more than one parameter:
CONCAT, LEFT, RIGHT, REPEAT, POSITION, LOCATE, REPLACE, SUBSTRING, INSERT
This change updates KerberosAuthenticationIT to resolve the host used
to connect to the test cluster. This is needed because the host could
be an IP address but SPNEGO requires a hostname to work properly. This
is done by adding a hook in ESRestTestCase for building the HttpHost
from the host and port.
Additionally, the project now specifies the IPv4 loopback address as
the http host. This is done because we need to be able to resolve the
address used for the HTTP transport before the node starts up, but the
http.ports file is not written until the node is started.
Closes#32498
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `x-pack:qa:rolling-upgrade*` projects to use
the new versions.
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `x-pack/qa/security-example-spi-extension`
project to use the new versions.
This commit avoids dependency during compile on copy keytab to
be present in the generated sources so pre-commit does not
stall for updating vagrant box.
Closes#32387
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `x-pack:qa:full-cluster-restart` project to use
the new versions.
This bundles the x-pack:protocol project into the x-pack:plugin:core
project because we'd like folks to consider it an implementation detail
of our build rather than a separate artifact to be managed and depended
on. It is now bundled into both x-pack:plugin:core and
client:rest-high-level. To make this work I had to fix a few things.
Firstly, I had to make PluginBuildPlugin work with the shadow plugin.
In that case we have to bundle only the `shadow` dependencies and the
shadow jar.
Secondly, every reference to x-pack:plugin:core has to use the `shadow`
configuration. Without that the reference is missing all of the
un-shadowed dependencies. I tried to make it so that applying the shadow
plugin automatically redefines the `default` configuration to mirror the
`shadow` configuration which would allow us to use bare project references
to the x-pack:plugin:core project but I couldn't make it work. It'd *look*
like it works but then fail for transitive dependencies anyway. I think
it is still a good thing to do but I don't have the willpower to do it
now.
Finally, I had to fix an issue where Eclipse and IntelliJ didn't properly
reference shadowed transitive dependencies. Neither IDE supports shadowing
natively so they have to reference the shadowed projects. We fix this by
detecting `shadow` dependencies when in "Intellij mode" or "Eclipse mode"
and adding `runtime` dependencies to the same target. This convinces
IntelliJ and Eclipse to play nice.
This commit adds support for Kerberos authentication with a platinum
license. Kerberos authentication support relies on SPNEGO, which is
triggered by challenging clients with a 401 response with the
`WWW-Authenticate: Negotiate` header. A SPNEGO client will then provide
a Kerberos ticket in the `Authorization` header. The tickets are
validated using Java's built-in GSS support. The JVM uses a vm wide
configuration for Kerberos, so there can be only one Kerberos realm.
This is enforced by a bootstrap check that also enforces the existence
of the keytab file.
In many cases a fallback authentication mechanism is needed when SPNEGO
authentication is not available. In order to support this, the
DefaultAuthenticationFailureHandler now takes a list of failure response
headers. For example, one realm can provide a
`WWW-Authenticate: Negotiate` header as its default and another could
provide `WWW-Authenticate: Basic` to indicate to the client that basic
authentication can be used in place of SPNEGO.
In order to test Kerberos, unit tests are run against an in-memory KDC
that is backed by an in-memory ldap server. A QA project has also been
added to test against an actual KDC, which is provided by the krb5kdc
fixture.
Closes#30243
* Complete changes for running IT in a fips JVM
- Mute :x-pack:qa:sql:security:ssl:integTest as it
cannot run in FIPS 140 JVM until the SQL CLI supports key/cert.
- Set default JVM keystore/truststore password in top level build
script for all integTest tasks in a FIPS 140 JVM
- Changed top level x-pack build script to use keys and certificates
for trust/key material when spinning up clusters for IT
The notion of "quality" is an overloaded term in the search ranking evaluation
context. Its usually used to decribe certain levels of "good" vs. "bad" of a
seach result with respect to the users information need. We currently report the
result of the ranking evaluation as `quality_level` which is a bit missleading.
This changes the response parameter name to `metric_score` which fits better.
* Remove BouncyCastle dependency from runtime
This commit introduces a new gradle project that contains
the classes that have a dependency on BouncyCastle. For
the default distribution, It builds a jar from those and
in puts it in a subdirectory of lib
(/tools/security-cli) along with the BouncyCastle jars.
This directory is then passed in the
ES_ADDITIONAL_CLASSPATH_DIRECTORIES of the CLI tools
that use these classes.
BouncyCastle is removed as a runtime dependency (remains
as a compileOnly one) from x-pack core and x-pack security.
Martijn van Groningen
Julie Tibshirani
Alpar Torok
Jason Tedor
Luca Cavanna
Zachary Tong
Ioannis Kakavas
Jay Modi
David Turner
Yogesh Gaikwad
Christoph Büscher
Nhat Nguyen
Tim Vernum
Jake Landis
David Roberts
Benjamin Trent
Albert Zaharovits
Ryan Ernst
jaymode
David Kyle
Marios Trivyzas
Marios Trivyzas
markharwood
Armin Braun
Jim Ferenczi
Dimitris Athanasiou
Josh Soref
Tim Vernum
Tim Brooks
Mayya Sharipova
Nik Everett
Christian Schneider
Yannick Welsch
Michael Basnight
Jim Ferenczi
Zachary Tong
Gordon Brown
Ioannis Kakavas
Tal Levy
Alan Woodward
Colin Goodheart-Smithe
Costin Leau
Andrei Stefan
Marios Trivyzas
Pratik Sanglikar
Lee Hinman
Andrey Atapin
Shaunak Kashyap
lipsill
Kazuhiro Sera
Alexander Reelsen
Or Bin
Costin Leau
Ed Savage
Ed Savage
Adrien Grand
Lee Hinman
Igor Motov
Daniel Mitterdorfer