Change the logging infrastructure to handle when the node name isn't
available in `elasticsearch.yml`. In that case the node name is not
available until long after logging is configured. The biggest change is
that the node name logging no longer fixed at pattern build time.
Instead it is read from a `SetOnce` on every print. If it is unset it is
printed as `unknown` so we have something that fits in the pattern.
On normal startup we don't log anything until the node name is available
so we never see the `unknown`s.
We invoke force merge twice in the test to verify that recovery sources
are pruned when the global checkpoint advanced. However, if the global
checkpoint equals to the local checkpoint in the first force-merge, the
second force-merge will be a noop because all deleted docs are expunged
in the first merge already. We need to flush a new segment to make merge
happen so we can verify that all recovery sources are pruned.
Instead of passing DirectoryService which causes yet another dependency
on Store we can just pass in a Directory since we will just call
`DirectoryService#newDirectory()` on it anyway.
This change collapses all metrics aggregations classes into a single package `org.elasticsearch.aggregations.metrics`.
It also restricts the visibility of some classes (aggregators and factories) that should not be used outside of the package.
Relates #22868
When we rollover and index we write the conditions of the rollover that
the old index met into the old index. Loading this index metadata
requires a working `NamedXContentRegistry` that has been populated with
parsers from the rollover infrastructure. We had a few loads that didn't
use a working `NamedXContentRegistry` and so would fail if they ever
encountered an index that had been rolled over. Here are the locations
of the loads and how I fixed them:
* IndexFolderUpgrader - removed entirely. It existed to support opening
indices made in Elasticsearch 2.x. Since we only need this change as far
back as 6.4.1 which will supports reading from indices created as far
back as 5.0.0 we should be good here.
* TransportNodesListGatewayStartedShards - wired the
`NamedXContentRegistry` into place.
* TransportNodesListShardStoreMetaData - wired the
`NamedXContentRegistry` into place.
* OldIndexUtils - removed entirely. It existed to support the zip based
index backwards compatibility tests which we've since replaced with code
that actually runs old versions of Elasticsearch.
In addition to fixing the actual problem I added full cluster restart
integration tests for rollover which would have caught this problem and
I added an extra assertion to IndexMetaData's deserialization code which
will trip if we try to deserialize and index's metadata without a fully
formed `NamedXContentRegistry`. It won't catch if use the *wrong*
`NamedXContentRegistry` but it is better than nothing.
Closes#33316
This commit allows us to use different TranslogRecoveryRunner when
recovering an engine from its local translog. This change is a
prerequisite for the commit-based rollback PR.
Relates #32867
The main benefit of the upgrade for users is the search optimization for top scored documents when the total hit count is not needed. However this optimization is not activated in this change, there is another issue opened to discuss how it should be integrated smoothly.
Some comments about the change:
* Tests that can produce negative scores have been adapted but we need to forbid them completely: #33309Closes#32899
When index sorting is enabled, toXContent tried to serialize an
SortField object, resulting in an exception, when using the _segments
endpoint.
Relates #29120
With this commit we use the classic parent circuit breaker which does
not account for real memory usage. In those tests we want to have
reproducible results and hence it makes sense to disable the real memory
circuit breaker there.
Auto Following Patterns is a cross cluster replication feature that
keeps track whether in the leader cluster indices are being created with
names that match with a specific pattern and if so automatically let
the follower cluster follow these newly created indices.
This change adds an `AutoFollowCoordinator` component that is only active
on the elected master node. Periodically this component checks the
the cluster state of remote clusters if there new leader indices that
match with configured auto follow patterns that have been defined in
`AutoFollowMetadata` custom metadata.
This change also adds two new APIs to manage auto follow patterns. A put
auto follow pattern api:
```
PUT /_ccr/_autofollow/{{remote_cluster}}
{
"leader_index_pattern": ["logs-*", ...],
"follow_index_pattern": "{{leader_index}}-copy",
"max_concurrent_read_batches": 2
... // other optional parameters
}
```
and delete auto follow pattern api:
```
DELETE /_ccr/_autofollow/{{remote_cluster_alias}}
```
The auto follow patterns are directly tied to the remote cluster aliases
configured in the follow cluster.
Relates to #33007
Co-authored-by: Jason Tedor jason@tedor.me
With features like CCR building on the CCS infrastructure, the settings
prefix search.remote makes less sense as the namespace for these remote
cluster settings than does a more general namespace like
cluster.remote. This commit replaces these settings with cluster.remote
with a fallback to the deprecated settings search.remote.
There are two races in the testUpdateAndReadChangesConcurrently if the
following engines are created in the worker threads. We fixed the
translog issue in #33352, but there is still another race with
createStore.
This commit ensures that we create all engines in the main thread.
Relates #33352Closes#33344
Historically we have had a ESLoggingHandler in the netty module that
logs low-level connection operations. This class just extends the netty
logging handler with some (broken) message deserialization. This commit
fixes this message serialization and moves the class to server.
This new logger logs inbound and outbound messages. Eventually, we
should move other event logging to this class (connect, close, flush).
That way we will have consistent logging regards of which transport is
loaded.
Resolves#27306 on master. Older branches will need a different fix.
This commit is related to #32517. It allows an "server_name"
attribute on a DiscoveryNode to be propagated to the server using
the TLS SNI extentsion. This functionality is only implemented for
the netty security transport.
This change adds an expert index setting called `index.merge.policy.deletes_pct_allowed`.
It controls the maximum percentage of deleted documents that is tolerated in the index.
Lower values make the index more space efficient at the expense of increased CPU and I/O activity.
Values must be between `20` and `50`. Default value is `33`.
Drops and unused logging constructor, simplifies a rarely used one, and
removes `Settings` from a third. There is now only a single logging ctor
that takes `Settings` and we'll remove that one in a follow up change.
The maximum number of fields per index is limited to 1000 by default by the
`index.mapping.total_fields.limit` setting to prevent accidental mapping
explosions due to too many fields. Currently all metadata fields also count
towards this limit, which can lead to some confusion when using lower limits.
It is not obvious for users that they cannot actually add as many fields as
are specified by the limit in this case.
This change takes the number of metadata fields out of the field count that we
check against the field limit. It also adds tests that check that we can add
fields up to the specified limit, but throw an exception for any additional field added.
Closes#24096
Deprecating a some setting specializations (e.g., list settings) does
not cause deprecation warning headers and deprecation log messages to
appear. This is due to a missed check for deprecation. This commit fixes
this for all setting specializations, and ensures that this can not be
missed again.
Adds a place for users to store cluster-wide data they wish to associate
with the cluster via the Cluster Settings API. This is strictly for
user-defined data, Elasticsearch makes no other other use of these
settings.
Now that types are unique per mapping we can retrieve the document mapper
without referencing the type. This fixes an NPE when stored fields are disabled.
For 6x we'll need a different fix since mappings can still have multiple types.
Relates #32941
This commit introduces the formal notion of a private setting. This
enables us to register some settings that we had previously not
registered as fully-fledged settings to avoid them being exposed via
APIs such as the create index API. For example, we had hacks in the
codebase to allow index.version.created to be passed around inside of
settings objects, but was not registered as a setting so that if a user
tried to use the setting on any API then they would get an
exception. This prevented users from setting index.version.created on
index creation, or updating it via the index settings API. By
introducing private settings, we can continue to reject these attempts,
yet now we can represent these settings as actual settings. In this
change, we register index.version.created as an actual setting. We do
not cutover all settings that we had been treating as private in this
pull request, it is already quite large due to moving some tests around
to account for the fact that some tests need to be able to set the
index.version.created. This can be done in a follow-up change.
* TESTS: Fix Race Condition in Temp Path Creation
* Calling `createTempDir` concurrently here in
the `Follower`s causes collisions at times
which lead to `createEngine` throwing because
of unexpected files in the newly created temp
dir
* Fixed by creating all temp dirs in the main test thread
* closes#33344
We can have multiple documents in Lucene with the same seq_no for
parent-child documents (or without rollback). In this case, the usage
"lastSeenSeqNo + 1" is an off-by-one error as it may miss some
documents. This error merely affects the `skippedOperations` contract.
See: https://github.com/elastic/elasticsearch/pull/33222#discussion_r213842257Closes#33318
The existing implemention could not deal with negative numbers as well
as +- 999 milliseconds around the epoch.
This commit uses Instant.ofEpochMilli() and parses the input to
a number instead of using a date formatter.
This commit adds the support to early terminate the collection of a leaf
in the aggregation framework. This change introduces a MultiBucketCollector which
handles CollectionTerminatedException exactly like the Lucene MultiCollector.
Any aggregator can now throw a CollectionTerminatedException without stopping
the collection of a sibling aggregator. This is useful for aggregators that
can infer their result without visiting all documents (e.g.: a min/max aggregation on a match_all query).
Drops `Settings` from some logging ctors now that they are no longer
needed. This should allow us to stop passing `Settings` around to quite
as many places.
* master:
Mute test watcher usage stats output
[Rollup] Fix FullClusterRestart test
Adjust soft-deletes version after backport into 6.5
completely drop `index.shard.check_on_startup: fix` for 7.0 (#33194)
Fix AwaitsFix issue number
Mute SmokeTestWatcherWithSecurityIT testsi
drop `index.shard.check_on_startup: fix` (#32279)
tracked at
[DOCS] Moves ml folder from x-pack/docs to docs (#33248)
[DOCS] Move rollup APIs to docs (#31450)
[DOCS] Rename X-Pack Commands section (#33005)
TEST: Disable soft-deletes in ParentChildTestCase
Fixes SecurityIntegTestCase so it always adds at least one alias (#33296)
Fix pom for build-tools (#33300)
Lazy evaluate java9home (#33301)
SQL: test coverage for JdbcResultSet (#32813)
Work around to be able to generate eclipse projects (#33295)
Highlight that index_phrases only works if no slop is used (#33303)
Different handling for security specific errors in the CLI. Fix for https://github.com/elastic/elasticsearch/issues/33230 (#33255)
[ML] Refactor delimited file structure detection (#33233)
SQL: Support multi-index format as table identifier (#33278)
MINOR: Remove Dead Code from PathTrie (#33280)
Enable forbiddenapis server java9 (#33245)
This PR integrates Lucene soft-deletes(LUCENE-8200) into Elasticsearch.
Highlight works in this PR include:
- Replace hard-deletes by soft-deletes in InternalEngine
- Use _recovery_source if _source is disabled or modified (#31106)
- Soft-deletes retention policy based on the global checkpoint (#30335)
- Read operation history from Lucene instead of translog (#30120)
- Use Lucene history in peer-recovery (#30522)
Relates #30086Closes#29530
---
These works have been done by the whole team; however, these individuals
(lexical order) have significant contribution in coding and reviewing:
Co-authored-by: Adrien Grand <jpountz@gmail.com>
Co-authored-by: Boaz Leskes <b.leskes@gmail.com>
Co-authored-by: Jason Tedor <jason@tedor.me>
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
Co-authored-by: Nhat Nguyen <nhat.nguyen@elastic.co>
Co-authored-by: Simon Willnauer <simonw@apache.org>
This PR integrates Lucene soft-deletes(LUCENE-8200) into Elasticsearch.
Highlight works in this PR include:
- Replace hard-deletes by soft-deletes in InternalEngine
- Use _recovery_source if _source is disabled or modified (#31106)
- Soft-deletes retention policy based on the global checkpoint (#30335)
- Read operation history from Lucene instead of translog (#30120)
- Use Lucene history in peer-recovery (#30522)
Relates #30086Closes#29530
---
These works have been done by the whole team; however, these individuals
(lexical order) have significant contribution in coding and reviewing:
Co-authored-by: Adrien Grand jpountz@gmail.com
Co-authored-by: Boaz Leskes b.leskes@gmail.com
Co-authored-by: Jason Tedor jason@tedor.me
Co-authored-by: Martijn van Groningen martijn.v.groningen@gmail.com
Co-authored-by: Nhat Nguyen nhat.nguyen@elastic.co
Co-authored-by: Simon Willnauer simonw@apache.org
This PR removes the deprecated `Custom` class in `IndexMetaData`, in favor
of a `Map<String, DiffableStringMap>` that is used to store custom index
metadata. As part of this, there is now no way to set this metadata in a
template or create index request (since it's only set by plugins, or dedicated
REST endpoints).
The `Map<String, DiffableStringMap>` is intended to be a namespaced `Map<String,
String>` (`DiffableStringMap` implements `Map<String, String>`, so the signature
is more like `Map<String, Map<String, String>>`). This is so we can do things
like:
``` java
Map<String, String> ccrMeta = indexMetaData.getCustom("ccr");
```
And then have complete control over the metadata. This also means any
plugin/feature that uses this has to manage its own BWC, as the map is just
serialized as a map. It also means that if metadata is put in the map that isn't
used (for instance, if a plugin were removed), it causes no failures the way
an unregistered `Setting` would.
The reason I use a custom `DiffableStringMap` here rather than a plain
`Map<String, String>` is so the map can be diffed with previous cluster state
updates for serialization.
Supersedes #32683
We cut over to `index.resize.source.*` but still have these constants
being public in `IndexMetaData`. Those Settings and constants are not needed
in 7.x while we still need to keep the keys known to private settings since
they might be part of the index settings of old indices. We can remove that
in 8.0. Yet, we should remove the settings to make sure they are not used again.
Fix serialization of empty field capabilities response
When no response are required (no indices match the requested patterns) the
empty response throws an NPE in the transport serialization (writeTo).
If an exclude or an include clause removes an entry to a nested field in the original source at query time,
the creation of nested hits fails with an NPE. This change fixes this exception and replaces the nested document
source with an empty map.
Closes#33163Closes#33170
Today we add a NoOp to Lucene and translog if we fail to process an
indexing operation. However, we are only adding NoOps to translog for
delete operations. In order to have a complete history in Lucene, we
should add NoOps of failed delete operations to both Lucene and translog.
Relates #29530
Today we support a static list of seed hosts in core Elasticsearch, and allow a
dynamic list of seed hosts to be provided via a file using the `discovery-file`
plugin. In fact the ability to provide a dynamic list of seed hosts is
increasingly useful, so this change moves this functionality to core
Elasticsearch to avoid the need for a plugin.
Furthermore, in order to start up nodes in integration tests we currently
assign a known port to each node before startup, which unfortunately sometimes
fails if another process grabs the selected port in the meantime. By moving the
`discovery-file` functionality into the core product we can use it to avoid
this race.
This change also moves the expected path to the file from
`$ES_PATH_CONF/discovery-file/unicast_hosts.txt` to
`$ES_PATH_CONF/unicast_hosts.txt`. An example of this file is not included in
distributions.
For BWC purposes the plugin still exists, but does nothing more than create the
example file in the old location, and issue a warning when it is used. We also
continue to support the old location for the file, but warn about its
deprecation.
Relates #29244Closes#33030
Some settings have filters applied to them and we use this in logs and
the get nodes info API. For consistency, we should apply this in the get
cluster settings API too.
* master:
Painless: Add Bindings (#33042)
Update version after client credentials backport
Fix forbidden apis on FIPS (#33202)
Remote 6.x transport BWC Layer for `_shrink` (#33236)
Test fix - Graph HLRC tests needed another field adding to randomisation exception list
HLRC: Add ML Get Records API (#33085)
[ML] Fix character set finder bug with unencodable charsets (#33234)
TESTS: Fix overly long lines (#33240)
Test fix - Graph HLRC test was missing field name to be excluded from randomisation logic
Remove unsupported group_shard_failures parameter (#33208)
Update BucketUtils#suggestShardSideQueueSize signature (#33210)
Parse PEM Key files leniantly (#33173)
INGEST: Add Pipeline Processor (#32473)
Core: Add java time xcontent serializers (#33120)
Consider multi release jars when running third party audit (#33206)
Update MSI documentation (#31950)
HLRC: create base timed request class (#33216)
[DOCS] Fixes command page titles
HLRC: Move ML protocol classes into client ml package (#33203)
Scroll queries asking for rescore are considered invalid (#32918)
Painless: Fix Semicolon Regression (#33212)
ingest: minor - update test to include dissect (#33211)
Switch remaining LLREST usage to new style Requests (#33171)
HLREST: add reindex API (#32679)
The shrink action was renamed to `_resize` with the addition
or split. This bwc layer is unnecessary on 7.x since 6.latest will
always use the resize action.
We have had support for the `group_shard_failures` parameter in our code for a while, since we introduced failures grouping. When we introduced validation of parameters at REST, we seem to have forgotten to expose such parameter. Given that the parameter is effectively not supported for many months now, that no user has complained about that and that grouping is the expected behaviour, this commit removes support for the parameter.
`BucketUtils#suggestShardSideQueueSize` used to calculate the shard_size based on the number of shards. It returns now a different value only based on whether we are querying a single shard or multiple shards. This commit replaces the numberOfShards argument with a boolean that tells whether we are querying a single shard or not.
Exclude classes meant for newer versions than what we are auditing against, those classes won't be found. There's no reason to exclude JDK classes from newer versions, with this PR, we will not extract them in the first place.
* master:
[Rollup] Better error message when trying to set non-rollup index (#32965)
HLRC: Use Optional in validation logic (#33104)
Remove unused User class from protocol (#33137)
ingest: Introduce the dissect processor (#32884)
[Docs] Add link to es-kotlin-wrapper-client (#32618)
[Docs] Remove repeating words (#33087)
Minor spelling and grammar fix (#32931)
Remove support for deprecated params._agg/_aggs for scripted metric aggregations (#32979)
Watcher: Simplify finding next date in cron schedule (#33015)
Run Third party audit with forbidden APIs CLI (part3/3) (#33052)
Fix plugin build test on Windows (#33078)
HLRC+MINOR: Remove Unused Private Method (#33165)
Remove old unused test script files (#32970)
Build analysis-icu client JAR (#33184)
Ensure to generate identical NoOp for the same failure (#33141)
ShardSearchFailure#readFrom to set index and shardId (#33161)
Today a file-based recovery will replay all existing translog operations
from the primary on a replica so that that replica can have a full
history in translog as the primary. However, with soft-deletes enabled,
we should not do it because:
1. All operations before the local checkpoint of the safe commit exist in
the commit already.
2. The number of operations before the local checkpoint may be considerable
and requires a significant amount of time to replay on a replica.
Relates #30522
Relates #29530
This commit makes primary-replica resyncer use Lucene as the source of
history operation instead of translog if soft-deletes is enabled. With
this change, we no longer expose translog snapshot directly in IndexShard.
Relates #29530
The new implementation is functional equivalent with the old, ant based one.
It parses task standard error to get the missing classes and violations in the same way.
I considered re-using ForbiddenApisCliTask but Gradle makes it hard to build inheritance with tasks that have task actions , since the order of the task actions can't be controlled.
This inheritance isn't dully desired either as the third party audit task is much more opinionated and we don't want to expose some of the configuration.
We could probably extract a common base class without any task actions, but probably more trouble than it's worth.
Closes#31715
We generate slightly different NoOps in InternalEngine and
TransportShardBulkAction for the same failure.
1. InternalEngine uses Exception#getFailure to generate a message
without the class name: newOp [NoOp{seqNo=1, primaryTerm=1,
reason='Contexts are mandatory in context enabled completion field
[suggest_context]'}].
2. TransportShardBulkAction uses Exception#toString to generate a
message with the class name: NoOp{seqNo=1, primaryTerm=1,
reason='java.lang.IllegalArgumentException: Contexts are mandatory in
context enabled completion field [suggest_context]'}.
If a write operation fails while a replica is recovering, that replica
will possibly receive two different NoOps: one from recovery and one
from replication. These two different NoOps will trip
TranslogWriter#assertNoSeqNumberConflict assertion.
This commit ensures that we generate the same Noop for the same failure.
Closes#32986
As part of recent changes made to `ShardOperationFailedException` we introduced `index` and `shardId` members to the base class, but the subclasses are entirely responsible for the serialization of such fields. In the case of `ShardSearchFailure`, we have an additional `SearchShardTarget` instance member which also holds the index and the shardId, hence they get serialized as part of `SearchShardTarget` itself. When de-serializing a `ShardSearchFailure` though, we need to remember to also set the parent class `index` and `shardId` fields otherwise they get lost
Relates to #32640
* master:
Adjust BWC version on mapping version
Token API supports the client_credentials grant (#33106)
Build: forked compiler max memory matches jvmArgs (#33138)
Introduce mapping version to index metadata (#33147)
SQL: Enable aggregations to create a separate bucket for missing values (#32832)
Fix grammar in contributing docs
SECURITY: Fix Compile Error in ReservedRealmTests (#33166)
APM server monitoring (#32515)
Support only string `format` in date, root object & date range (#28117)
[Rollup] Move toBuilders() methods out of rollup config objects (#32585)
Fix forbiddenapis on java 11 (#33116)
Apply publishing to genreate pom (#33094)
Have circuit breaker succeed on unknown mem usage
Do not lose default mapper on metadata updates (#33153)
Fix a mappings update test (#33146)
Reload Secure Settings REST specs & docs (#32990)
Refactor CachingUsernamePassword realm (#32646)
The introduction of mapping version on index metadata has been
backported to 6.x. This commit adjusts the BWC version around mapping
version to account for this backport.
This commit introduces mapping version to index metadata. This value is
monotonically increasing and is updated on mapping updates. This will be
useful in cross-cluster replication so that we can request mapping
updates from the leader only when there is a mapping update as opposed
to the strategy we employ today which is to request a mapping update any
time there is an index metadata update. As index metadata updates can
occur for many reasons other than mapping updates, this leads to some
unnecessary requests and work in cross-cluster replication.
With this commit we implement a workaround for
https://bugs.openjdk.java.net/browse/JDK-8207200 which is a race
condition in the JVM that results in `IllegalArgumentException` to be
thrown in rare cases when we determine memory usage via `MemoryMXBean`.
As we do not want to fail requests in those cases we always return zero
memory usage.
Relates #31767
Relates #33125
When applying index metadata updates we run through the mappings
updating them if needed. Today if there is not an update to the default
mapper, we can lose the default mapping. This means that, for example,
if we apply a settings update to an index we will lose the default
mapper. This happens because we were not guarding updating the default
mapping with a check that the default mapping was updated in the
metadata update. When there is no update in the metadata update, we need
to continue to preserve the previous default mapping. This commit
achieves this by moving the updating of the default mapping under the
same guard that we use for updating the default mapping source. We add a
test that fails before putting the update under a guard and now passes
after moving the update under the guard.
This commit fixes a mappings update test. The test is broken in the
sense that it passes, but for the wrong reason. The test here is testing
that if we make a mapping update but do not commit that mapping update
then the mapper service still maintains the previous document
mapper. This was not the case long, long ago when a mapping update would
update the in-memory state before the cluster state update was
committed. This test was passing, but it was passing because the mapping
update was never even updated. It was never even updated because it was
encountering a null pointer exception. Of course the in-memory state is
not going to be updated in that case, we are simply going to end up with
a failed cluster state update. Fixing that leads to another issue which
is that the mapping source does not even parse so again we would, of
course, end up with the in-memory state not being modified. We fix these
issues, assert that the result cluster state task completed
successfully, and finally that the in-memory state was not updated since
we never committed the resulting cluster state.
* master:
Add proxy support to RemoteClusterConnection (#33062)
TEST: Skip assertSeqNos for closed shards (#33130)
TEST: resync operation on replica should acquire shard permit (#33103)
Switch remaining x-pack tests to new style Requests (#33108)
Switch remaining tests to new style Requests (#33109)
Switch remaining ml tests to new style Requests (#33107)
Build: Line up IDE detection logic
Security index expands to a single replica (#33131)
HLRC: request/response homogeneity and JavaDoc improvements (#33133)
Checkstyle!
[Test] Fix sporadic failure in MembershipActionTests
Revert "Do NOT allow termvectors on nested fields (#32728)"
[Rollup] Move toAggCap() methods out of rollup config objects (#32583)
Fix race condition in scheduler engine test
This adds support for connecting to a remote cluster through
a tcp proxy. A remote cluster can configured with an additional
`search.remote.$clustername.proxy` setting. This proxy will be used
to connect to remote nodes for every node connection established.
We still try to sniff the remote clsuter and connect to nodes directly
through the proxy which has to support some kind of routing to these nodes.
Yet, this routing mechanism requires the handshake request to include some
kind of information where to route to which is not yet implemented. The effort
to use the hostname and an optional node attribute for routing is tracked
in #32517Closes#31840
If a shard was closed, we return null for SeqNoStats. Therefore the
assertion assertSeqNos will hit NPE when it verifies a closed shard.
This commit skips closed shards in assertSeqNos and enables this
assertion in AbstractDisruptionTestCase.
* es/master: (62 commits)
[DOCS] Add docs for Application Privileges (#32635)
Add versions 5.6.12 and 6.4.1
Do NOT allow termvectors on nested fields (#32728)
[Rollup] Return empty response when aggs are missing (#32796)
[TEST] Add some ACL yaml tests for Rollup (#33035)
Move non duplicated actions back into xpack core (#32952)
Test fix - GraphExploreResponseTests should not randomise array elements Closes#33086
Use `addIfAbsent` instead of checking if an element is contained
TESTS: Fix Random Fail in MockTcpTransportTests (#33061)
HLRC: Fix Compile Error From Missing Throws (#33083)
[DOCS] Remove reload password from docs cf. #32889
HLRC: Add ML Get Buckets API (#33056)
Watcher: Improve error messages for CronEvalTool (#32800)
Search: Support of wildcard on docvalue_fields (#32980)
Change query field expansion (#33020)
INGEST: Cleanup Redundant Put Method (#33034)
SQL: skip uppercasing/lowercasing function tests for AZ locales as well (#32910)
Fix the default pom file name (#33063)
Switch ml basic tests to new style Requests (#32483)
Switch some watcher tests to new style Requests (#33044)
...
* Search: Support of wildcard on docvalue_fields
For consistency with stored_fields, docvalue_fields should support the use of wildcards.
Documentation of doc values fields is updated accordingly.
See also: #26390Closes#26299
This commit changes the query field expansion for query parsers
to not rely on an hardcoded list of field types. Instead we rely on
the type of exception that is thrown by MappedFieldType#termQuery to
include/exclude an expanded field.
Supersedes #31655Closes#31798
We used to set `maxScore` to `0` within `TopDocs` in situations where there is really no score as the size was set to `0` and scores were not even tracked. In such scenarios, `Float.Nan` is more appropriate, which gets converted to `max_score: null` on the REST layer. That's also more consistent with lucene which set `maxScore` to `Float.Nan` when merging empty `TopDocs` (see `TopDocs#merge`).
In our Netty layer we have had to take extra precautions against Netty
catching throwables which prevents them from reaching the uncaught
exception handler. This code has taken on additional uses in NIO layer
and now in the scheduler engine because there are other components in
stack traces that could catch throwables and suppress them from reaching
the uncaught exception handler. This commit is a simple cleanup of the
iterative evolution of this code to refactor all uses into a single
method in ExceptionsHelper.
Today we can only have non-affix settings updated and consumed _together_.
Yet, there are use-cases where two affix settings depend on each other which
makes using the hard without consuming updates together. Unfortunately, there is
not straight forward way to have N settings updated together in a type-safe way
having 2 still serves a large portion of use-cases.
This change allows an engine to recover from its local translog up to
the given seqno. The extended API can be used in these use cases:
When a replica starts following a new primary, it resets its index to
the safe commit, then replays its local translog up to the current
global checkpoint (see #32867).
When a replica starts a peer-recovery, it can initialize the
start_sequence_number to the persisted global checkpoint instead of the
local checkpoint of the safe commit. A replica will then replay its
local translog up to that global checkpoint before accepting remote
translog from the primary. This change will increase the chance of
operation-based recovery. I will make this in a follow-up.
Relates #32867
Today `_msearch` doesn't allow modifying the `max_concurrent_shard_requests`
per sub search request. This change adds support for setting this parameter on
all sub-search requests in an `_msearch`.
Relates to #31877
The maximum map count boostrap check can be a hindrance to users that do
not own the underlying platform on which they are executing
Elasticsearch. This is because addressing it requires tuning the kernel
and a platform provider might now allow this, especially on shared
infrastructure. However, this bootstrap check is not needed if mmapfs is
not in use. Today we do not have a way for the user to communicate that
they are not going to use mmapfs. This commit therefore adds a setting
that enables the user to disallow mmapfs. When mmapfs is disallowed, the
maximum map count bootstrap check is not enforced. Additionally, we
fallback to a different default index store and prevent the explicit use
of mmapfs for an index.
This change introduces a dedicated ConnectionManager for every RemoteClusterConnection
such that there is not state shared with the TransportService internal ConnectionManager.
All connections to a remote cluster are isolated from the TransportService but still uses
the TransportService and it's internal properties like the Transport, tracing and internal
listener actions on disconnects etc.
This allows a remote cluster connection to have a different lifecycle than a local cluster connection,
also local discovery code doesn't get notified if there is a disconnect on from a remote cluster and
each connection can use it's own dedicated connection profile which allows to have a reduced set of
connections per cluster without conflicting with the local cluster.
Closes#31835
* INGEST: Move all Pipeline State into IngestService
* Moves all pipeline state into the ingest service
* Retains the existing pipeline store and pipeline execution service as inner classes to make the review easier, they should be flattened out in the next step
* All tests for these classes were copied (and adapted) to the ingest service tests
* This is a refactoring step to enable a clean implementation of a pipeline processor (See #32473)
There are two problems with the scheduler engine today. Both relate to
listeners that throw.
The first problem is that any triggered listener that throws a plain old
exception will cause no additional listeners to be triggered for the
event, and will also cause the scheduler to never be invoked again. This
leads to lost events and is bad.
The second problem is that any triggered listener that throws an error
of the fatal kind will not lead to that error because caught by the
uncaught exception handler. This is because the triggered listener is
executed as a future task under a scheduled thread pool executor. A
throwable there goes caught by the JDK framework and set as the outcome
on the future task. Since we never inspect these tasks for their
outcomes, nor is there a good place to do this, we have to handle these
errors ourselves. To do this, we catch them and dispatch them to the
uncaught exception handler via a forked thread. This is similar to our
handling in Netty.
* master:
Generalize remote license checker (#32971)
Trim translog when safe commit advanced (#32967)
Fix an inaccuracy in the dynamic templates documentation. (#32890)
Logging: Use settings when building daemon threads (#32751)
All Translog inner closes should happen after tragedy exception is set (#32674)
HLREST: AwaitsFix ML Test
Pass DiscoveryNode to initiateChannel (#32958)
Add mzn and dz to unsupported locales (#32957)
Use settings from the context in BootstrapChecks (#32908)
Update docs for node specifications (#30468)
HLRC: Forbid all Elasticsearch logging infra (#32784)
Only configure publishing if it's applied externally (#32351)
Fixes libs:dissect when in eclipse
Protect ScriptedMetricIT test cases against failures on 0-doc shards (#32959) (#32968)
[Kerberos] Add documentation for Kerberos realm (#32662)
Watcher: Properly find next valid date in cron expressions (#32734)
Fix some small issues in the getting started docs (#30346)
Set forbidden APIs target compatibility to compiler java version (#32935)
Move connection listener to ConnectionManager (#32956)
Since #28140 when the global checkpoint is advanced, we try to move the
safe commit forward, and clean up old index commits if possible. However,
we forget to trim unreferenced translog.
This change makes sure that we prune both old translog and index commits
when the safe commit advanced.
Relates #28140Closes#32089
Subclasses of `EsIntegTestCase` run multiple Elasticsearch nodes in the
same JVM and when we log we look at the name of the thread to figure out
the node name. This makes sure that all calls to `daemonThreadFactory`
include the node name.
Closes#32574
I'd like to follow this up with more drastic changes that make it
impossible to do this incorrectly but that change is much larger than
this and I'd like to get these log lines fixed up sooner rather than
later.
All Translog inner closes should happen after tragedy exception is set (#32674)
We faced with the nasty race condition. See #32526
InternalEngine.failOnTragic method has thrown AssertionError.
If you carefully look at if branches in this method, you will spot that its only possible, if either Lucene IndexWriterhas closed from inside or Translog, has closed from inside, but tragedy exception is not set.
For now, let us concentrate on the Translog class.
We found out that there are two methods in Translog - namely rollGeneration and trimOperations that are closing Translog in case of Exception without tragedy exception being set.
This commit fixes these 2 methods. To fix it, we pull tragedyException from TranslogWriter up-to Translog class, because in these 2 methods IndexWriter could be innocent, but still Translog needs to be closed. Also, tragedyException is wrapped with TragicExceptionHolder to reuse CAS/addSuppresed functionality in Translog and TranslogWriter.
Also to protect us in the future and make sure close method is never called from inside Translog special assertion examining stack trace is added. Since we're still targeting Java 8 for runtime - no StackWalker API is used in the implementation.
In the stack-trace checking method, we're considering inner caller not only Translog methods but Translog child classes methods as well. It does mean that Translog is meant for extending it, but it's needed to be able to test this method.
Closes#32526
This is related to #32517. This commit passes the DiscoveryNode to the
initiateChannel method for different Transport implementation. This
will allow additional attributes (besides just the socket address) to be
used when opening channels.
Randomized test conditions that cause some shards to have no docs on them
failed due to test asserts that relied on a lazy initialization side effect
from the map script. After this fix:
- Test cases with the relevant init script are protected
- Test cases with the relevant combine or reduce scripts were already
protected, because the combine and reduce scripts safely handle this case.
This is a followup to #31886. After that commit the
TransportConnectionListener had to be propogated to both the
Transport and the ConnectionManager. This commit moves that listener
to completely live in the ConnectionManager. The request and response
related methods are moved to a TransportMessageListener. That listener
continues to live in the Transport class.
* elastic/master: (46 commits)
NETWORKING: Make RemoteClusterConn. Lazy Resolve DNS (#32764)
[DOCS] Splits the users API documentation into multiple pages (#32825)
[DOCS] Splits the token APIs into separate pages (#32865)
[DOCS] Creates redirects for role management APIs page
Bypassing failing test PainlessDomainSplitIT#testHRDSplit (#32966)
TEST: Mute testRetentionPolicyChangeDuringRecovery
[DOCS] Fixes more broken links to role management APIs
[Docs] Tweaks and fixes to rollup docs
[DOCS] Fixes links to role management APIs
[ML][TEST] Fix BasicRenormalizationIT after adding multibucket feature
[DOCS] Splits the roles API documentation into multiple pages (#32794)
[TEST] Run pre 6.4 nodes in non-FIPS JVMs (#32901)
Make Geo Context Mapping Parsing More Strict (#32821)
[ML] fix updating opened jobs scheduled events (#31651) (#32881)
Scripted metric aggregations: add deprecation warning and system property to control legacy params (#31597)
Tests: Fix timezone conversion in DateTimeUnitTests
Enable FIPS140LicenseBootstrapCheck (#32903)
Fix InternalAutoDateHistogram reproducible failure (#32723)
Remove assertion in testDocStats on deletedDocs counter (#32914)
HLRC: Move ML request converters into their own class (#32906)
...
* Lazy resolve DNS (i.e. `String` to `DiscoveryNode`) to not run into indefinitely caching lookup issues (provided the JVM dns cache is configured correctly as explained in https://www.elastic.co/guide/en/elasticsearch/reference/6.3/networkaddress-cache-ttl.html)
* Changed `InetAddress` type to `String` for that higher up the stack
* Passed down `Supplier<DiscoveryNode>` instead of outright `DiscoveryNode` from `RemoteClusterAware#buildRemoteClustersSeeds` on to lazy resolve DNS when the `DiscoveryNode` is actually used (could've also passed down the value of `clusterName = REMOTE_CLUSTERS_SEEDS.getNamespace(concreteSetting)` together with the `List<String>` of hosts, but this route seemed to introduce less duplication and resulted in a significantly smaller changeset).
* Closes#28858
Currently, if geo context is represented by something other than
geo_point or an object with lat and lon fields, the parsing of it
as a geo context can result in ignoring the context altogether,
returning confusing errors such as number_format_exception or trying
to parse the number specifying as long-encoded hash code. It would also
fail if the geo_point was stored.
This commit makes the mapping parsing more strict and will fail during
mapping update or index creation if the geo context doesn't point to
a geo_point field.
Supersedes #32412Closes#32202
* Scripted metric aggregations: add deprecation warning and system property to control legacy params
Scripted metric aggregation params._agg/_aggs are replaced by state/states context variables. By default the old params are still present, and a deprecation warning is emitted when Scripted Metric Aggregations are used. A new system property can be used to disable the legacy params. This functionality will be removed in a future revision.
* Fix minor style issue and docs test failure
* Disable deprecated params._agg/_aggs in tests and revise tests to use state/states instead
* Add integration test covering deprecated scripted metrics aggs params._agg/_aggs access
* Disable deprecated params._agg/_aggs in docs integration tests and revise stored scripts to use state/states instead
* Revert unnecessary migrations doc change
A relevant note should be added in the changes destined for 7.0; this PR is going to be backported to 6.x.
* Replace deprecated _agg param bwc integration test with a couple of unit tests
* Fix compatibility test after merge
* Rename backwards compatibility system property per code review feedback
* Tweak deprecation warning text per review feedback
This fix prevernts trying to parse unknown timezone ids by converting
the joda time zone via java.util.TimeZone to a java time based ZoneId.
Closes#32927
testDocStats test is flaky and sometimes it's failing on jenkins and
failure is not reproducible locally. The reason for this failure is in
timing. If the number of deleted documents is greater than 33% of inserted
documents, Lucene will schedule segments to merge if TieredMergePolicy is
used (it's not the case for LogMergePolicy, but ES is only using
TieredMergePolicy). If this merge is performed before stats are
retrieved - we will get 0 for "deleted" counter.
So basically this counter could be either 0 or numOfDeletedDocs at this point,
but this is the too loose assertion and we decided to remove it at all.
Closes#32766
This commit disables the automatic `refresh_interval` in order to ensure
that index readers cannot differ between the normal and scroll search.
This issue is related to the 7.5 Lucene upgrade which contains a change that
makes single segment merge more likely to occur (max deletes percentage).
Closes#32682
We do not support passphrases on the secure settings storage (the
keystore). Yet, we added support for this in the API layer. This commit
removes this support so that we are not limited in our future options,
or have to make a breaking change.
This change cleans up some methods in the CharArrays class from x-pack, which
includes the unification of char[] to utf8 and utf8 to char[] conversions that
intentionally do not use strings. There was previously an implementation in
x-pack and in the reloading of secure settings. The method from the reloading
of secure settings was adopted as it handled more scenarios related to the
backing byte and char buffers that were used to perform the conversions. The
cleaned up class is moved into libs/core to allow it to be used by requests
that will be migrated to the high level rest client.
Relates #32332
* master:
Fix global checkpoint listeners test
HLRC: adding machine learning open job (#32860)
[ML] Add log structure finder functionality (#32788)
INGEST: Add Configuration Except. Data to Metdata (#32322)
This commit fixes a global checkpoint listeners test wherein we were
expecting an executor to have been used even if there were no
listeners. This is silliness, so this commit adjusts the assertion to
verify that the executor never fires if there are no listeners, and
fires exactly once if there is one or more listeners.
This commit introduces the ability for global checkpoint listeners to be
registered at the shard level. These listeners are notified when the
global checkpoint is updated, and also when the shard closes. To
encapsulate these listeners, we introduce a shard-level component that
handles synchronization of notification and modifications to the
collection of listeners.
This is related to #31835. It moves the default connection profile into
the ConnectionManager class. The will allow us to have different
connection managers with different profiles.
This removes custom Response classes that extend `AcknowledgedResponse` and do nothing, these classes are not needed and we can directly use the non-abstract super-class instead.
While this appears to be a large PR, no code has actually changed, only class names have been changed and entire classes removed.
This commit adds a java time version of the existing rounding classes, which features the same test suite and a small test class to check if serialization works as expected.
Significance score doubles were being parsed as long. Existing tests did not catch this because SignificantLongTermsTests and SignificantStringTermsTests did not set the score. Fixed these and also added integration test.
Thanks for the report/fix, Blakko
Closes#32770
* INGEST: Create Index Before Pipeline Execute
* Ensures that indices are created before the default pipeline setting is read to correcly handle the case of an index template containing a default pipeline (without the fix the first document does not get the pipeline applied as explained in #32758)
* closes#32758
#31821 introduced an unreleased bug where NOOP updates were incorrectly mutating the bulk
shard request, inserting null item to be replicated, which would result in NullPointerExceptions when
serializing the request to be shipped to the replicas.
Closes#32808
This is related to #31835. This commit adds a connection manager that
manages client connections to other nodes. This means that the
TcpTransport no longer maintains a map of nodes that it is connected
to.
With the move to java time, the default formatter used by toString on
ZonedDateTime uses optional components for least significant portions of
the date. This commit changes the cat indices api to use a strict date
time format, which will always output milliseconds, even if they are
zero.
closes#32466
Currently AbstractBuilderTestCase generates certain random values in its
`beforeTest()` method annotated with @Before only the first time that a test
method in the suite is run while initializing the serviceHolder that we use for
the rest of the test. This changes the values of subsequent random values
and has the effect that when running single methods from a test suite with
"-Dtests.method=*", the random values it sees are different from when the same
test method is run as part of the whole test suite. This makes it hard to use
the reproduction lines logged on failure.
This change runs the inialization of the serviceHolder and the randomization
connected to it using the test runners master seed, so reproduction by running
just one method is possible again.
Closes#32400
Processing bulk request goes item by item. Sometimes during processing, we need to stop execution and wait for a new mapping update to be processed by the node. This is currently achieved by throwing a `RetryOnPrimaryException`, which is caught higher up. When the exception is caught, we wait for the next cluster state to arrive and process the request again. Sadly this is a problem because all operations that were already done until the mapping change was required are applied again and get new sequence numbers. This in turn means that the previously issued sequence numbers are never replicated to the replicas. That causes the local checkpoint of those shards to be stuck and with it all the seq# based infrastructure.
This commit refactors how we deal with retries with the goal of removing `RetryOnPrimaryException` and `RetryOnReplicaException` (not done yet). It achieves so by introducing a class `BulkPrimaryExecutionContext` that is used the capture the execution state and allows continuing from where the execution stopped. The class also formalizes the steps each item has to go through:
1) A translation phase for updates
2) Execution phase (always index/delete)
3) Waiting for a mapping update to come in, if needed
4) Requires a retry (for updates and cases where the mapping are still not available after the put mapping call returns)
5) A finalization phase which allows updates to the index/delete result to an update result.
This adds a java time based date math parser class in order, which will replace the joda date based one in the future. For now the class also returns the date in milliseconds since the epoch.
Currently if a document cannot be indexed because it violates the defined
mapping for the index, a MapperException is thrown. In some cases it is
useful to expose the expected field type in the exception itself,
so that the user can react based on the error message. This change adds
the expected data type to the MapperException.
Closes#31502
Remove a few of the logger constructors that aren't widely used or
aren't used at all and deprecate a few more logger constructors in favor
of log4j2's `LogManager`.
A bug in the test suite prevented to properly check that all date
formatters printed the date the same way like joda time does.
This fixes the test and thus also a fair share of formats, that
now use the strict parser for printing.
We previously discussed moving the classes extending `AcknowledgedResponse` to
simply use `AcknowledgedResponse`, making the class non-abstract.
This moves the first class to do this, removing `WritePipelineResponse` in the
process.
If we like the way this looks, I will switch the remaining classes over to using
`AcknowledgedResponse`.
When Circuit Breaker has tripped, certain diagnostic requests like
"_cluster/health" succeed where as request to / fails with
503 Service Unavailable. This behavior is observed because of this
commit f32b700 where certain API paths are whitelisted from
Circuit Breaking exception, but / is not whitelisted.
Added / to circuit breaker whitelist so that it can be used for
diagnostic purposes
* Fixes suggestion generics
This solves a compile problem in Eclipse where Eclipse could not
resolve the generics for the options field in `PhraseSuggestion.Entry`.
But I think this is also a good change in general because
`PhraseSuggestion.Entry` is now declaring the specific `Option`
implementation it requires rather than `Suggest.Entry.Option` which is
more general and could lead to weird bugs. `CompletionSuggestion.Entry`
and `TermSuggestion.Entry` already declare the more specific class they
use so I think this was an oversight in `PhaseSuggestion.Entry`
* iter
`ShardOperationFailedException` and corresponding implementors seem to suggest that the cause may be null, case that is also handled in a few places. Yet, it does not seem to be possible in practice for the cause to be null, hence we can clean that up and enforce the cause to be a non null value. This is best done by making `ShardOperationFailedException` an abstract class rather than an interface, which holds the basic member instance that all the subclasses have in common and can also enforce that cause, status and reason are non null.
As part of #32608 we made sure that the fully qualified index name is taken from the query shard context whenever creating a new `QueryShardException`. That change introduced a regression as instead of setting the entire `Index` object to the exception, which holds index name and index uuid, we ended up setting only the index name (including cluster alias). With this commit we make sure that the index uuid does not get lost and we try to lower the chances that a similar bug makes it in another time. That's done by making `QueryShardContext` return the fully qualified `Index` (which also holds the uuid) rather than only the fully qualified index name.
Suggestion responses were previously serialized as streamables which
made writing suggesters in plugins with custom suggestion response types
impossible. This commit makes them serialized as named writeables and
provides a facility for registering a reader for suggestion responses
when registering a suggester.
This also makes Suggestion responses abstract, requiring a suggester
implementation to provide its own types. Suggesters which do not need
anything additional to what is defined in Suggest.Suggestion should
provide a minimal subclass.
The existing plugin suggester integration tests are removed and
replaced with an equivalent implementation as an example
plugin.
It will be useful for future efforts to know if the global checkpoint
was updated. To this end, we need to expose whether or not the global
checkpoint was updated when the state of the replication tracker
updates. For this, we add to the tracker a callback that is invoked
whenever the global checkpoint is updated. For primaries this will be
invoked when the computed global checkpoint is updated based on state
changes to the tracker. For replicas this will be invoked when the local
knowledge of the global checkpoint is advanced from the primary.
The MockNioTransport (similar to the MockTcpTransport) is used for integ
tests. The MockTcpTransport has always only opened a single for all of
its work. The MockNioTransport has awlays opened the default number of
connections (13). This means that every test where two transports
connect requires 26 connections. This is more than is necessary. This
commit modifies the MockNioTransport to only require 3 connections.
Primary terms were introduced as part of the sequence-number effort (#10708) and added in ES
5.0. Subsequent work introduced the replication tracker which lets the primary own its replication
group (#25692) to coordinate recovery and replication. The replication tracker explicitly exposes
whether it is operating in primary mode or replica mode, independent of the ShardRouting object
that's associated with a shard. During a primary relocation, for example, the primary mode is
transferred between the primary relocation source and the primary relocation target. After
transferring this so-called primary context, the old primary becomes a replication target and the
new primary the replication source, reflected in the replication tracker on both nodes. With the
most recent PR in this area (#32442), we finally have a clean transition between a shard that's
operating as a primary and issuing sequence numbers and a shard that's serving as a replication
target. The transition from one state to the other is enforced through the operation-permit system,
where we block permit acquisition during such changes and perform the transition under this
operation block, ensuring that there are no operations in progress while the transition is being
performed. This finally allows us to turn the best-effort checks that were put in place to prevent
shards from being used in the wrong way (i.e. primary as replica, or replica as primary) into hard
assertions, making it easier to catch any bugs in this area.
Currently, when TranslogCorruptedException is thrown most of the times it does not contain information about the translog location on the file system. There is the translog recovery tool that accepts the translog path as an argument and users are constantly puzzled where to get the path.
This pull request adds "source" information to every TranslogCorruptedException thrown. The source could be local file, remote translog source (used for recovery), assertion (translog entry is constructed to perform some assertion) or translog constructed inside the test.
Closes#24929
This change adds a check so that when parsing the search source, script fields are
ignored when the requested search result size is 0. This helps with e.g. clients like
Kibana that sends a list of script fields that they may need for convenience, but they
don't require any hits. Before this change, user sometimes ran into confusing behaviour,
e.g. the script compilation limit to breaking although no hits were requested.
Closes#31824
* We were comparing the wrong timeout value in the `randomValueOtherThan` call here, leading to no mutation happening for a certain seed
* closes#32639
Today content type detection on an input stream works by peeking up to
twenty bytes into the stream. If the stream is headed by more whitespace
than twenty bytes, we might fail to detect the content type. We should
be ignoring this whitespace before attempting to detect the content
type. This commit does that by ignoring all leading whitespace in an
input stream before attempting to guess the content type.
The assertion in the test was not broad enough. If the timing is very unlucky, the
shard is already promoted to primary before the indexOnReplica even gets to execute.
Closes#32645
* master:
Cross-cluster search: preserve cluster alias in shard failures (#32608)
Handle AlreadyClosedException when bumping primary term
[TEST] Allow to run in FIPS JVM (#32607)
[Test] Add ckb to the list of unsupported languages (#32611)
SCRIPTING: Move Aggregation Scripts to their own context (#32068)
Painless: Use LocalMethod Map For Lookup at Runtime (#32599)
[TEST] Enhance failure message when bulk updates have failures
[ML] Add ML result classes to protocol library (#32587)
Suppress LicensingDocumentationIT.testPutLicense in release builds (#32613)
[Rollup] Update wire version check after backport
Suppress Wildfly test in FIPS JVMs (#32543)
[Rollup] Improve ID scheme for rollup documents (#32558)
ingest: doc: move Dot Expander Processor doc to correct position (#31743)
[ML] Add some ML config classes to protocol library (#32502)
[TEST]Split transport verification mode none tests (#32488)
Core: Move helper date formatters over to java time (#32504)
[Rollup] Remove builders from DateHistogramGroupConfig (#32555)
[TEST} unmutes SearchAsyncActionTests and adds debugging info
[ML] Add Detector config classes to protocol library (#32495)
[Rollup] Remove builders from MetricConfig (#32536)
Tests: Add rolling upgrade tests for watcher (#32428)
Fix race between replica reset and primary promotion (#32442)
When some remote clusters return shard failures as part of a cross-cluster search request, the cluster alias currently gets lost. As a result, if the shard failures are all caused by the same error, and against indices belonging to different clusters, but with the same index name, only one failure gets returned as part of the search response, meaning that failures are grouped by index name, ignoring the cluster alias.
With this commit we make sure that `ShardSearchFailure` returns the cluster alias as part of the index name. Also, we set the fully qualfied index name when creating a `QueryShardException`. That way shard failures are grouped by cluster:index. Such fixes should cover at least most of the cases where either 1) the shard target is set but we don't have the index in the cause (we were previously reading it only from the cause that did not have the cluster alias) 2) the shard target is missing but if the cause is a `QueryShardException` the cluster alias does not get lost.
We also prevent NPE in case the failure cause is not set and test such scenario.
If the shard is already closed while bumping the primary term, this can result in an
AlreadyClosedException to be thrown. As we use asyncBlockOperations, the exception
will be thrown on a thread from the generic thread pool and end up in the uncaught
exception handler, failing our tests.
Relates to #32442
Some classes use internal date formatters, which now can be moved over
to java time using the DateFormatters class.
The same applies for a few test cases.
This unmutes the testFanOutAndCollect()` method and add a check to make
sure we aren't accidentally running something twice causing a search
phase to still be running after we have counted down the latch
Relates to #29242
We've recently seen a number of test failures that tripped an assertion in IndexShard (see issues
linked below), leading to the discovery of a race between resetting a replica when it learns about a
higher term and when the same replica is promoted to primary. This commit fixes the race by
distinguishing between a cluster state primary term (called pendingPrimaryTerm) and a shard-level
operation term. The former is set during the cluster state update or when a replica learns about a
new primary. The latter is only incremented under the operation block, which can happen in a
delayed fashion. It also solves the issue where a replica that's still adjusting to the new term
receives a cluster state update that promotes it to primary, which can happen in the situation of
multiple nodes being shut down in short succession. In that case, the cluster state update thread
would call `asyncBlockOperations` in `updateShardState`, which in turn would throw an exception
as blocking permits is not allowed while an ongoing block is in place, subsequently failing the shard.
This commit therefore extends the IndexShardOperationPermits to allow it to queue multiple blocks
(which will all take precedence over operations acquiring permits). Finally, it also moves the primary
activation of the replication tracker under the operation block, so that the actual transition to
primary only happens under the operation block.
Relates to #32431, #32304 and #32118
* master:
HLRC: Move commercial clients from XPackClient (#32596)
Add cluster UUID to Cluster Stats API response (#32206)
Security: move User to protocol project (#32367)
[TEST] Test for shard failures, add debug to testProfileMatchesRegular
Minor fix for javadoc (applicable for java 11). (#32573)
Painless: Move Some Lookup Logic to PainlessLookup (#32565)
TEST: Avoid merges in testSeqNoAndCheckpoints
[Rollup] Remove builders from HistoGroupConfig (#32533)
Mutes failing SQL string function tests due to #32589
fixed elements in array of produced terms (#32519)
INGEST: Enable default pipelines (#32286)
Remove cluster state initial customs (#32501)
Mutes LicensingDocumentationIT due to #32580
[ML] Remove multiple_bucket_spans (#32496)
[ML] Rename JobProvider to JobResultsProvider (#32551)
Correct minor typo in explain.asciidoc for HLRC
Build: Add elastic maven to repos used by BuildPlugin (#32549)
Clarify the error message when a pipeline agg is used in the 'order' parameter. (#32522)
Revert "[test] turn on host io cache for opensuse (#32053)"
Enable packaging tests on suse boxes
[ML] Improve error when no available field exists for rule scope (#32550)
[ML] Improve error for functions with limited rule condition support (#32548)
Painless: Clean Up PainlessField (#32525)
Add @AwaitsFix for #32554
Remove broken @link in Javadoc
Scripting: Conditionally use java time api in scripting (#31441)
[ML] Fix thread leak when waiting for job flush (#32196) (#32541)
Add AwaitsFix to failing test - see #32546
Core: Minor size reduction for AbstractComponent (#32509)
SQL: Added support for string manipulating functions with more than one parameter (#32356)
[DOCS] Reloadable Secure Settings (#31713)
Watcher: Reenable HttpSecretsIntegrationTests#testWebhookAction test (#32456)
[Rollup] Remove builders from TermsGroupConfig (#32507)
Use hostname instead of IP with SPNEGO test (#32514)
Switch x-pack rolling restart to new style Requests (#32339)
NETWORKING: Fix Netty Leaks by upgrading to 4.1.28 (#32511)
[DOCS] Small fixes in rule configuration page (#32516)
Painless: Clean up PainlessMethod (#32476)
Build: Remove shadowing from benchmarks (#32475)
Docs: Add all JDKs to CONTRIBUTING.md
Add licensing enforcement for FIPS mode (#32437)
SQL: Add test for handling of partial results (#32474)
Mute testFilterCacheStats
[ML][DOCS] Fix typo applied_to => applies_to
Scripting: Fix painless compiler loader to know about context classes (#32385)
* Make cluster stats response contain cluster UUID
* Updating constructor usage in Monitoring tests
* Adding cluster_uuid field to Cluster Stats API reference doc
* Adding rest api spec test for expecting cluster_uuid in cluster stats response
* Adding missing newline
* Indenting do section properly
* Missed a spot!
* Fixing the test cluster ID
Unmuting the test and adding some more debug output. Was not able to
reproduce the prior failure, but it seems possible that the
failure (mismatched counts) could be caused by partial search results
during the test.
The assertions check for shard failures first, because if one of the
two searches is partial the rest of the test will fail.
Next, instead of just checking respective hit counts, we emit the
difference in hits to help identify what went wrong.
Closes#32492
Nik Everett
Nhat Nguyen
Simon Willnauer
Jim Ferenczi
Jim Ferenczi
Alan Woodward
Alexander Reelsen
Daniel Mitterdorfer
Martijn van Groningen
Jason Tedor
Tim Brooks
Armin Braun
Adrien Grand
Christoph Büscher
Paul Sanwald
Gordon Brown
Sohaib Iftikhar
Julie Tibshirani
tony-dillon
Colin Goodheart-Smithe
Vladimir Dolzhenko
Vladimir Dolzhenko
Alpar Torok
Lee Hinman
Igor Motov
David Turner
Luca Cavanna
Mark Tozzi
Jonathan Little
Mikita Karaliou
Daniel Mitterdorfer
Mayya Sharipova
Michael Basnight
Ignacio Vera
Andrey Ershov
JB Nizet
Jay Modi
Lee Hinman
Andy Bristol
markharwood
Yannick Welsch
Ryan Ernst
Boaz Leskes
lipsill
Nicholas Knize
Suresh N S
Parth Verma
Shaunak Kashyap
Zachary Tong