In order to ensure that we do not write a broken piece of `RepositoryData`
because the phyiscal repository generation was moved ahead more than one step
by erroneous concurrent writing to a repository we must check whether or not
the current assumed repository generation exists in the repository physically.
Without this check we run the risk of writing on top of stale cached repository data.
Relates #56911
Today, we send operations in phase2 of peer recoveries batch by batch
sequentially. Normally that's okay as we should have a fairly small of
operations in phase 2 due to the file-based threshold. However, if
phase1 takes a lot of time and we are actively indexing, then phase2 can
have a lot of operations to replay.
With this change, we will send multiple batches concurrently (defaults
to 1) to reduce the recovery time.
Backport of #58018
Today we do not allow a node to start if its filesystem is readonly, but
it is possible for a filesystem to become readonly while the node is
running. We don't currently have any infrastructure in place to make
sure that Elasticsearch behaves well if this happens. A node that cannot
write to disk may be poisonous to the rest of the cluster.
With this commit we periodically verify that nodes' filesystems are
writable. If a node fails these writability checks then it is removed
from the cluster and prevented from re-joining until the checks start
passing again.
Closes#45286
Co-authored-by: Bukhtawar Khan <bukhtawar7152@gmail.com>
For #58994 it would be useful to be able to share test infrastructure.
This PR shares `AbstractSnapshotIntegTestCase` for that purpose, dries up SLM tests
accordingly and adds a shared and efficient (compared to the previous implementations)
way of waiting for no running snapshot operations to the test infrastructure to dry things up further.
Dry up tests that use a disruption that isolates the master from all other nodes.
Also, turn disruption types that have neither parameters nor state into constants
to make things a little clearer.
Working through a heap dump for an unrelated issue I found that we can easily rack up
tens of MBs of duplicate empty instances in some cases.
I moved to a static constructor to guard against that in all cases.
This is a follow-up to #57573. This commit combines coordinating and
primary bytes under the same "write" bucket. Double accounting is
prevented by only accounting the bytes at either the reroute phase or
the primary phase. TransportBulkAction calls execute directly, so the
operations handler is skipped and the bytes are not double accounted.
Ingest script processors were changed to eagerly compile their scripts
when the ingest pipeline is saved, but conditional scripts were missed.
This commit adds eager compilation to ingest conditional scripts, which
will help surface errors before runtime, as well as adds tests for each
case we might encounter between inline and stored script compilation
failures.
closes#58864
The read-only-allow-delete block is not really under the user's control
since Elasticsearch adds/removes it automatically. This commit removes
support for it from the new API for adding blocks to indices that was
introduced in #58094.
Restoring from a snapshot (which is a particular form of recovery) does not currently take recovery throttling into account
(i.e. the `indices.recovery.max_bytes_per_sec` setting). While restores are subject to their own throttling (repository
setting `max_restore_bytes_per_sec`), this repository setting does not allow for values to be configured differently on a
per-node basis. As restores are very similar in nature to peer recoveries (streaming bytes to the node), it makes sense to
configure throttling in a single place.
The `max_restore_bytes_per_sec` setting is also changed to default to unlimited now, whereas previously it was set to
`40mb`, which is the current default of `indices.recovery.max_bytes_per_sec`). This means that no behavioral change
will be observed by clusters where the recovery and restore settings were not adapted.
Relates https://github.com/elastic/elasticsearch/issues/57023
Co-authored-by: James Rodewig <james.rodewig@elastic.co>
Today the disk-based shard allocator accounts for incoming shards by
subtracting the estimated size of the incoming shard from the free space on the
node. This is an overly conservative estimate if the incoming shard has almost
finished its recovery since in that case it is already consuming most of the
disk space it needs.
This change adds to the shard stats a measure of how much larger each store is
expected to grow, computed from the ongoing recovery, and uses this to account
for the disk usage of incoming shards more accurately.
Backport of #58029 to 7.x
* Picky picky
* Missing type
This PR implements recursive mapping merging for composable index templates.
When creating an index, we perform the following:
* Add each component template mapping in order, merging each one in after the
last.
* Merge in the index template mappings (if present).
* Merge in the mappings on the index request itself (if present).
Some principles:
* All 'structural' changes are disallowed (but everything else is fine). An
object mapper can never be changed between `type: object` and `type: nested`. A
field mapper can never be changed to an object mapper, and vice versa.
* Generally, each section is merged recursively. This includes `object`
mappings, as well as root options like `dynamic_templates` and `meta`. Once we
reach 'leaf components' like field definitions, they always overwrite an
existing one instead of being merged.
Relates to #53101.
* Replace compile configuration usage with api (#58451)
- Use java-library instead of plugin to allow api configuration usage
- Remove explicit references to runtime configurations in dependency declarations
- Make test runtime classpath input for testing convention
- required as java library will by default not have build jar file
- jar file is now explicit input of the task and gradle will ensure its properly build
* Fix compile usages in 7.x branch
Adds an API for putting an index block in place, which also ensures for write blocks that, once successfully returning to
the user, all shards of the index are properly accounting for the block, for example that all in-flight writes to an index have
been completed after adding the write block.
This API allows coordinating more complex workflows, where it is crucial that an index is no longer receiving writes after
the API completes, useful for example when marking an index as read-only during an upgrade in order to reindex its
documents.
RandomZone test method returns a ZoneId from the set of ids supported by
java. The only difference between joda and java supported timezones are
SystemV* timezones.
These should be excluded from randomZone method as they would break
testing. They also do not bring much confidence when used in testing as
I suspect they are rarely used.
That exclude should be removed for simplification once joda support is removed.
Minor bugs/inconsistencies:
If a shard hasn't changed at all we were reporting `0` for total size and total file count
while it was ongoing.
If a data node restarts/drops out during snapshot creation the fallback logic did not load the correct statistic from the repository but just created a status with `0` counts from the snapshot state in the CS. Added a fallback to reading from the repository in this case.
Fixes two bugs introduced by #57627:
1. We were not properly letting go of memory from the request breaker
when the aggregation finished.
2. We no longer supported totally arbitrary stuff produced by the init
script because we *assumed* that it'd be ok to run the script once
and clone its results. Sadly, cloning can't clone *anything* that the
init script can make, like `String` arrays. This runs the init script
once for every new bucket so we don't need to clone.
Today we have individual settings for configuring node roles such as
node.data and node.master. Additionally, roles are pluggable and we have
used this to introduce roles such as node.ml and node.voting_only. As
the number of roles is growing, managing these becomes harder for the
user. For example, to create a master-only node, today a user has to
configure:
- node.data: false
- node.ingest: false
- node.remote_cluster_client: false
- node.ml: false
at a minimum if they are relying on defaults, but also add:
- node.master: true
- node.transform: false
- node.voting_only: false
If they want to be explicit. This is also challenging in cases where a
user wants to have configure a coordinating-only node which requires
disabling all roles, a list which we are adding to, requiring the user
to keep checking whether a node has acquired any of these roles.
This commit addresses this by adding a list setting node.roles for which
a user has explicit control over the list of roles that a node has. If
the setting is configured, the node has exactly the roles in the list,
and not any additional roles. This means to configure a master-only
node, the setting is merely 'node.roles: [master]', and to configure a
coordinating-only node, the setting is merely: 'node.roles: []'.
With this change we deprecate the existing 'node.*' settings such as
'node.data'.
Implements a new histogram aggregation called `variable_width_histogram` which
dynamically determines bucket intervals based on document groupings. These
groups are determined by running a one-pass clustering algorithm on each shard
and then reducing each shard's clusters using an agglomerative
clustering algorithm.
This PR addresses #9572.
The shard-level clustering is done in one pass to minimize memory overhead. The
algorithm was lightly inspired by
[this paper](https://ieeexplore.ieee.org/abstract/document/1198387). It fetches
a small number of documents to sample the data and determine initial clusters.
Subsequent documents are then placed into one of these clusters, or a new one
if they are an outlier. This algorithm is described in more details in the
aggregation's docs.
At reduce time, a
[hierarchical agglomerative clustering](https://en.wikipedia.org/wiki/Hierarchical_clustering)
algorithm inspired by [this paper](https://arxiv.org/abs/1802.00304)
continually merges the closest buckets from all shards (based on their
centroids) until the target number of buckets is reached.
The final values produced by this aggregation are approximate. Each bucket's
min value is used as its key in the histogram. Furthermore, buckets are merged
based on their centroids and not their bounds. So it is possible that adjacent
buckets will overlap after reduction. Because each bucket's key is its min,
this overlap is not shown in the final histogram. However, when such overlap
occurs, we set the key of the bucket with the larger centroid to the midpoint
between its minimum and the smaller bucket’s maximum:
`min[large] = (min[large] + max[small]) / 2`. This heuristic is expected to
increases the accuracy of the clustering.
Nodes are unable to share centroids during the shard-level clustering phase. In
the future, resolving https://github.com/elastic/elasticsearch/issues/50863
would let us solve this issue.
It doesn’t make sense for this aggregation to support the `min_doc_count`
parameter, since clusters are determined dynamically. The `order` parameter is
not supported here to keep this large PR from becoming too complex.
Co-authored-by: James Dorfman <jamesdorfman@users.noreply.github.com>
Netty4HttpServerTransportTests has started to fail intermittently. It
seems like unexpected successful responses are being received when the
test is simulating errors. This commit adds logging to the test to
provide additional information when there is an unexpected success. It
also adds the logging to the nio http test.
Similarities only apply to a few text-based field types, but are currently set directly on
the base MappedFieldType class. This commit moves similarity information into
TextSearchInfo, and removes any mentions of it from MappedFieldType or FieldMapper.
It was previously possible to include a similarity parameter on a number of field types
that would then ignore this information. To make it obvious that this has no effect, setting
this parameter on non-text field types now issues a deprecation warning.
When assigning ports for internal cluster tests, we use the gradle
worker id as an adjustment on the base port of 10300. In order to not go
outside the max port range, we modulo the worker id by 223. Since gradle
worker ids start at 1, we expect to never actually get the base port of
10300. However, as the gradle daemon lasts for longer, the module can
result in a value of 0, which cases the test to fail. This commit
adjusts the modulo to ensure the value is never 0.
closes#58279
There was a discrepancy in the implementation of flush
acknowledgements: most of the class was designed on the
basis that the "last finalized bucket time" could be null
but the wire serialization assumed that it was never
null. This works because, the C++ sends zero "last
finalized bucket time" when it is not known or not
relevant. But then the Java code will print that to
XContent as it is assuming null represents not known or
not relevant.
This change corrects the discrepancies. Internally within
the class null represents not known or not relevant, but
this is translated from/to 0 for communications from the
C++ and old nodes that have the bug.
Additionally I switched from Date to Instant for this
class and made the member variables final to modernise it
a bit.
Backport of #58413
Now that MappedFieldType no longer extends lucene's FieldType, we need to have a
way of getting the index information about a field necessary for building text queries,
building term vectors, highlighting, etc. This commit introduces a new TextSearchInfo
abstraction that holds this information, and a getTextSearchInfo() method to
MappedFieldType to make it available. Field types that do not support text search can
just return null here.
This allows us to remove the MapperService.getLuceneFieldType() shim method.
Backporting #58096 to 7.x branch.
Relates to #53100
* use mapping source direcly instead of using mapper service to extract the relevant mapping details
* moved assertion to TimestampField class and added helper method for tests
* Improved logic that inserts timestamp field mapping into an mapping.
If the timestamp field path consisted out of object fields and
if the final mapping did not contain the parent field then an error
occurred, because the prior logic assumed that the object field existed.
Fixes a bug in TextFieldMapper serialization when index is false, and adds a
base-class test to ensure that all field mappers are tested against all variations
with defaults both included and excluded.
Fixes#58188
This is currently used to set the indexVersionCreated parameter on FieldMapper.
However, this parameter is only actually used by two implementations, and clutters
the API considerably. We should just remove it, and use it directly in the
implementations that require it.
The version of java printed when a test fails currently is passed in
from gradle. However, we already know this from java itself, so it is
not necessary. This commit changes how the runtime.java repro parameter
is found, as well as removes the compiler.java parameter which is no
longer relevant.
closes#57756
Currently a failed replication action will fail an entire replica. This
includes when replication fails due to potentially short lived transient
issues such as network distruptions or circuit breaking errors.
This commit implements retries using the retryable action.
Backport of #50920. Part of #48366. Implement an API for listing,
importing and deleting dangling indices.
Co-authored-by: David Turner <david.turner@elastic.co>
MappedFieldType is a combination of two concerns:
* an extension of lucene's FieldType, defining how a field should be indexed
* a set of query factory methods, defining how a field should be searched
We want to break these two concerns apart. This commit is a first step to doing this, breaking
the inheritance relationship between MappedFieldType and FieldType. MappedFieldType
instead has a series of boolean flags defining whether or not the field is searchable or
aggregatable, and FieldMapper has a separate FieldType passed to its constructor defining
how indexing should be done.
Relates to #56814
This commit adds an optional field, `description`, to all ingest processors
so that users can explain the purpose of the specific processor instance.
Closes#56000.
Ensures that InternalClusterInfoService's internally cached stats are refreshed whenever the
shard size or disk usage function (to mock out disk usage) are overridden.
Closes#57888
Fix broken numeric shard generations when reading them from the wire
or physically from the physical repository.
This should be the cheapest way to clean up broken shard generations
in a BwC and safe-to-backport manner for now. We can potentially
further optimize this by also not doing the checks on the generations
based on the versions we see in the `RepositoryData` but I don't think
it matters much since we will read `RepositoryData` from cache in almost
all cases.
Closes#57798
Before to determine if a field is meta-field, a static method of MapperService
isMetadataField was used. This method was using an outdated static list
of meta-fields.
This PR instead changes this method to the instance method that
is also aware of meta-fields in all registered plugins.
Related #38373, #41656Closes#24422
Improve efficiency of background indexer by allowing to add
an assertion for failures while they are produced to prevent
queuing them up.
Also, add non-blocking stop to the background indexer so that when
stopping multiple indexers we don't needlessly continue indexing
on some indexers while stopping another one.
Closes#57766
The test failed when it was running with 4 replicas and 3 indexing
threads. The recovering replicas can prevent the global checkpoint from
advancing. This commit increases the timeout to 60 seconds for this
suite and the check for no inflight requests.
Closes#57204
Almost every outbound message is serialized to buffers of 16k pagesize.
We were serializing these messages off the IO loop (and retaining the concrete message
instance as well) and would then enqueue it on the IO loop to be dealt with as soon as the
channel is ready.
1. This would cause buffers to be held onto for longer than necessary, causing less reuse on average.
2. If a channel was slow for some reason, not only would concrete message instances queue up for it, but also 16k of buffers would be reserved for each message until it would be written+flushed physically.
With this change, the serialization happens on the event loop which effectively limits the number of buffers that `N` IO-threads will ever use so long as messages are small and channels writable.
Also, this change dereferences the reference to the concrete outbound message as soon as it has been serialized to save some more on GC.
This reduces the GC time for a default PMC run by about 50% in experiments (3 nodes, 2G heap each, loopback ... obvious caveat is that GC isn't that heavy in the first place with recent changes but still a measurable gain).
I also expect it to be helpful for master node stability by causing less of a spike if master is e.g. hit by a large number of requests that are processed batched (e.g. shard snapshot status updates) and responded to in a short time frame all at once.
Obviously, the downside to this change is that it introduces more latency on the IO loop for the serialization. But since we read all of these messages on the IO loop as well I don't see it as much of a qualitative change really and the more predictable buffer use seems much more valuable relatively.
As the datastream information is stored in the `ClusterState.Metadata` we exposed
the `Metadata` to the `AsyncWaitStep#evaluateCondition` method in order for
the steps to be able to identify when a managed index is part of a DataStream.
If a managed index is part of a DataStream the rollover target is the DataStream
name and the highest generation index is the write index (ie. the rolled index).
(cherry picked from commit 6b410dfb78f3676fce1b7401f1628c1ca6fbd45a)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
At some point, we changed the supported-type test to also catch
assertion errors. This has the side effect of also catching the
`fail()` call inside the try-catch, which silently smothered some
failures.
This modifies the test to throw at the end of the try-catch
block to prevent from accidentally catching itself.
Catching the AssertionError is convenient because there are other locations
that do throw an assertion in tests (due to hitting an assertion
before the exception is thrown) so I think we should keep it around.
Also includes a variety of fixes to other tests which were failing
but being silently smothered.
This saves some memory when the `histogram` aggregation is not a top
level aggregation by dropping `asMultiBucketAggregator` in favor of
natively implementing multi-bucket storage in the aggregator. For the
most part this just uses the `LongKeyedBucketOrds` that we built the
first time we did this.
* Add new circuitbreaker plugin and refactor CircuitBreakerService (#55695)
This commit lays the ground work for plugins supplying their own circuit breakers.
It adds a new interface: `CircuitBreakerPlugin`.
This interface provides methods for providing custom child CircuitBreaker objects. There are also facilities for allowing dynamic settings for the custom breakers.
With the refactor, circuit breakers are no longer replaced on setting changes. Instead, the two mutable settings themselves are `volatile`. Plugins that want to use their custom circuit breaker should keep a reference of their constructed breaker.
If an upgraded node is restarted multiple times without flushing a new
index commit, then we will wrongly exclude all commits from the starting
commits. This bug is reproducible with these minimal steps: (1) create
an empty index on 6.1.4 with translog retention disabled, (2) upgrade
the cluster to 7.7.0, (3) restart the upgraded the cluster. The problem
is that with the new translog policy can trim translog without having a
new index commit, while the existing commit still refers to the previous
translog generation.
Closes#57091
When we had multiple mapping types, an update to a field in one type had to be
propagated to the same field in all other types. This was done using the
Mapper.updateFieldType() method, called at the end of a merge. However, now
that we only have a single type per index, this method is unnecessary and can
be removed.
Relates to #41059
Backport of #56986
Closes#57168 by using `AggregatorTestCase#newIndexSearcher` in the
`AggregatorTestCase#testCase`. Without that global ordinals will
*sometimes* fail to work.
When slicing a releasable bytes reference we would create a new counter
every time and pass the original reference chain to the new slice on every
slice invocation. This would lead to extremely deep reference chains and
needlessly uses a dedicated counter for every slice when all the slices
eventually just refer to the same underlying bytes and `Releasable`.
This commit tracks the ref count wrapper with its releasable in a separate
object that can be passed around on every slicing, making the slices' tree
as flat as the original releasable bytes reference.
Also, we were needlessly creating a redundant releasable bytes reference from
a releasable bytes-stream-output that we never actually used for releasing (all code
that uses it just releases the stream itself instead).
Merging logic is currently split between FieldMapper, with its merge() method, and
MappedFieldType, which checks for merging compatibility. The compatibility checks
are called from a third class, MappingMergeValidator. This makes it difficult to reason
about what is or is not compatible in updates, and even what is in fact updateable - we
have a number of tests that check compatibility on changes in mapping configuration
that are not in fact possible.
This commit refactors the compatibility logic so that it all sits on FieldMapper, and
makes it called at merge time. It adds a new FieldMapperTestCase base class that
FieldMapper tests can extend, and moves the compatibility testing machinery from
FieldTypeTestCase to here.
Relates to #56814
Elasticsearch requires that a HttpRequest abstraction be implemented
by http modules before server processing. This abstraction controls when
underlying resources are released. This commit moves this abstraction to
be created immediately after content aggregation. This change will
enable follow-up work including moving Cors logic into the server
package and tracking bytes as they are aggregated from the network
level.
Add tracking for regular and multipart uploads.
Regular uploads are categorized as PUT.
Multi part uploads are categorized as POST.
The number of documents created for the test #testRequestStats
have been increased so all upload methods are exercised.
Backport of #56826
Add tracking for multipart and resumable uploads for GoogleCloudStorage.
For resumable uploads only the last request is taken into account for
billing, so that's the only request that's tracked.
Backport of #56821
Backporting #56585 to 7.x branch.
Adds tracking for the API calls performed by the GoogleCloudStorage
underlying SDK. It hooks an HttpResponseInterceptor to the SDK
transport layer and does http request filtering based on the URI
paths that we are interested to track. Unfortunately we cannot hook
a wrapper into the ServiceRPC interface since we're using different
levels of abstraction to implement retries during reads
(GoogleCloudStorageRetryingInputStream).
This merges the code for the `significant_terms` agg into the package
for the code for the `terms` agg. They are *super* entangled already,
this mostly just admits that to ourselves.
Precondition for the terms work in #56487
In a race condition, a search context could remain enlisted in
SearchService when an index is deleted, potentially causing the index
folder to not be cleaned up (for either lengthy searches or scrolls with
timeouts > 30 minutes or if the scroll is kept active).
Two spots that allow for some optimization:
* We are often creating a composite reference of just a single item in
the transport layer => special cased via static constructor to make sure we never do that
* Also removed the pointless case of an empty composite bytes ref
* `ByteBufferReference` is practically always created from a heap buffer these days so there
is no point of dealing with all the bounds checks and extra references to sliced buffers from that
and we can just use the underlying array directly
Right now all implementations of the `terms` agg allocate a new
`Aggregator` per bucket. This uses a bunch of memory. Exactly how much
isn't clear but each `Aggregator` ends up making its own objects to read
doc values which have non-trivial buffers. And it forces all of it
sub-aggregations to do the same. We allocate a new `Aggregator` per
bucket for two reasons:
1. We didn't have an appropriate data structure to track the
sub-ordinals of each parent bucket.
2. You can only make a single call to `runDeferredCollections(long...)`
per `Aggregator` which was the only way to delay collection of
sub-aggregations.
This change switches the method that builds aggregation results from
building them one at a time to building all of the results for the
entire aggregator at the same time.
It also adds a fairly simplistic data structure to track the sub-ordinals
for `long`-keyed buckets.
It uses both of those to power numeric `terms` aggregations and removes
the per-bucket allocation of their `Aggregator`. This fairly
substantially reduces memory consumption of numeric `terms` aggregations
that are not the "top level", especially when those aggregations contain
many sub-aggregations. It also is a pretty big speed up, especially when
the aggregation is under a non-selective aggregation like
the `date_histogram`.
I picked numeric `terms` aggregations because those have the simplest
implementation. At least, I could kind of fit it in my head. And I
haven't fully understood the "bytes"-based terms aggregations, but I
imagine I'll be able to make similar optimizations to them in follow up
changes.
Backport of: #56413
Allow cluster health api to resolve data streams and
automatically remove data streams after each test in
test cases extending from `ESIntegTestCase`
Relates to #53100
`FieldMapper#parseCreateField` accepts the parse context, plus a list of fields
as an output parameter. These fields are immediately added to the document
through `ParseContext#doc()`.
This commit simplifies the signature by removing the list of fields, and having
the mappers add the fields directly to `ParseContext#doc()`. I think this is
nicer for implementors, because previously fields could be added either through
the list, or the context (through `add`, `addWithKey`, etc.)
A FilterBlobContainer class was introduced in #55952 and it delegates
its behavior to a given BlobContainer while allowing to override
only necessary methods.
This commit replaces the existing BlobContainerWrapper class from
the test framework with the new FilterBlobContainer from core.
Backport of #56034.
Move includeDataStream flag from an IndicesOptions to IndexNameExpressionResolver.Context
as a dedicated field that callers to IndexNameExpressionResolver can set.
Also alter indices stats api to support data streams.
The rollover api uses this api and otherwise rolling over data stream does no longer work.
Relates to #53100
Using optimistic locking, add the ability to run a repository state
update task with a consistent view of the current repository data.
Allows for a follow-up to remove the snapshot INIT state.
* Allow Deleting Multiple Snapshots at Once (#55474)
Adds deleting multiple snapshots in one go without significantly changing the mechanics of snapshot deletes otherwise.
This change does not yet allow mixing snapshot delete and abort. Abort is still only allowed for a single snapshot delete by exact name.
In order to iterate through remote connections, the remote connection
manager maintains a local cache of connected nodes. Unfortunately this
is difficult in relationship with testing as it is inherently racy in
comparison to the parent connection manager map of connections.
This commit improves the relationship by only returning a cached
connection if it is still registered with the parent. If the connection
is not open, we will go to the slow path of allocating a iterator
directly from the parent.
There are no real users of `DeterministicTaskQueue#getExecutorService()` so we
can remove those public methods and expose the `ExecutorService` only through
the corresponding `ThreadPool`.
By forking off the `SAME` pool tasks and executing them in random order,
we are actually creating unrealisticc scenarios and missing the actual order
of operations (whatever task that puts the task on the `SAME` queue will always
run before the `SAME` queued task will be executed currently).
Also, added caching for the executors. It doesn't matter much, but saves some objects
and makes debugging a little easier because executor object ids make more sense.
Backports #55826 to 7.x
Modified AggregatorTestCase.searchAndReduce() method so that it returns an empty aggregation result when no documents have been inserted.
Also refactored several aggregation tests so they do not re-implement method AggregatorTestCase.testCase()
Fixes#55824
Currently a failed peer recovery action will fail an recovery. This
includes when the recovery fails due to potentially short lived
transient issues such as rejected exceptions or circuit breaking
errors.
This commit adds the concept of a retryable action. A retryable action
will be retryed in face of certain errors. The action will be retried
after an exponentially increasing backoff period. After defined time,
the action will timeout.
This commit only implements retries for responses that indicate the
target node has NOT executed the action.
Currently there is a clear mechanism to stub sending a request through
the transport. However, this is limited to testing exceptions on the
sender side. This commit reworks our transport related testing
infrastructure to allow stubbing request handling on the receiving side.
This adds a validation to VSParserHelper to ensure that a field or
script or both are specified by the user. This is technically
required today already, but throws an exception much deeper
in the agg framework and has a very unintuitive error for the user
(as well as eating more resources instead of failing early)
After #53562, the `geo_shape` field mapper is registered within
a module. This opens the door for introducing a new `geo_shape`
field mapper into the Spatial Plugin that has doc-values support.
This is very much an extension of server's GeoShapeFieldMapper,
but with the addition of the doc values implementation.
This change folds the removal of the in-progress snapshot entry
into setting the safe repository generation. Outside of removing
an unnecessary cluster state update, this also has the advantage
of removing a somewhat inconsistent cluster state where the safe
repository generation points at `RepositoryData` that contains a
finished snapshot while it is still in-progress in the cluster
state, making it easier to reason about the state machine of
upcoming concurrent snapshot operations.
To read from GCS repositories we're currently using Google SDK's official BlobReadChannel,
which issues a new request every 2MB (default chunk size for BlobReadChannel) using range
requests, and fully downloads the chunk before exposing it to the returned InputStream. This
means that the SDK issues an awfully high number of requests to download large blobs.
Increasing the chunk size is not an option, as that will mean that an awfully high amount of
heap memory will be consumed by the download process.
The Google SDK does not provide the right abstractions for a streaming download. This PR
uses the lower-level primitives of the SDK to implement a streaming download, similar to what
S3's SDK does.
Also closes#55505
If more than 100 shard-follow tasks are trying to connect to the remote
cluster, then some of them will abort with "connect listener queue is
full". This is because we retry on ESRejectedExecutionException, but not
on RejectedExecutionException.
We don't really need `LinkedHashSet` here. We can assume that all the
entries are unique and just use a list and use the list utilities to
create the cheapest possible version of the list.
Also, this fixes a bug in `addSnapshot` which would mutate the existing
linked hash set on the current instance (fortunately this never caused a real world bug)
and brings the collection in line with the java docs on its getter that claim immutability.
Adds ranged read support for GCS repositories in order to enable searchable snapshot support
for GCS.
As part of this PR, I've extracted some of the test infrastructure to make sure that
GoogleCloudStorageBlobContainerRetriesTests and S3BlobContainerRetriesTests are covering
similar test (as I saw those diverging in what they cover)
In #55298 we saw a failure of `CoordinationStateTests#testSafety` in which a
single master-eligible node is bootstrapped, then rebooted as a
master-ineligible node (losing its persistent state) and then rebooted as a
master-eligible node and bootstrapped again.
This happens because this test loses too much of the persistent state; in fact
once bootstrapped the node would not allow itself to be bootstrapped again.
This commit adjusts the test logic to reflect this.
Closes#55298
Some aggregations, such as the Terms* family, will use an alternate
class to represent unmapped shard results (while the rest of the aggs
use the same object but with some form of "empty" or "nullish" values
to represent unmapped).
This was problematic with AbstractWireSerializingTestCase because it
expects the instanceReader to always match the original class. Instead,
we need to use the NamedWriteable version so that the registry
can be consulted for the proper deserialization reader.
Backport from: #54726
The INCLUDE_DATA_STREAMS indices option controls whether data streams can be resolved in an api for both concrete names and wildcard expressions. If data streams cannot be resolved then a 400 error is returned indicating that data streams cannot be used.
In this pr, the INCLUDE_DATA_STREAMS indices option is enabled in the following APIs: search, msearch, refresh, index (op_type create only) and bulk (index requests with op type create only). In a subsequent later change, we will determine which other APIs need to be able to resolve data streams and enable the INCLUDE_DATA_STREAMS indices option for these APIs.
Whether an api resolve all backing indices of a data stream or the latest index of a data stream (write index) depends on the IndexNameExpressionResolver.Context.isResolveToWriteIndex().
If isResolveToWriteIndex() returns true then data streams resolve to the latest index (for example: index api) and otherwise a data stream resolves to all backing indices of a data stream (for example: search api).
Relates to #53100
* Add ValuesSource Registry and associated logic (#54281)
* Remove ValuesSourceType argument to ValuesSourceAggregationBuilder (#48638)
* ValuesSourceRegistry Prototype (#48758)
* Remove generics from ValuesSource related classes (#49606)
* fix percentile aggregation tests (#50712)
* Basic thread safety for ValuesSourceRegistry (#50340)
* Remove target value type from ValuesSourceAggregationBuilder (#49943)
* Cleanup default values source type (#50992)
* CoreValuesSourceType no longer implements Writable (#51276)
* Remove genereics & hard coded ValuesSource references from Matrix Stats (#51131)
* Put values source types on fields (#51503)
* Remove VST Any (#51539)
* Rewire terms agg to use new VS registry (#51182)
Also adds some basic AggTestCases for untested code
paths (and boilerplate for future tests once the IT are
converted over)
* Wire Cardinality aggregation to work with the ValuesSourceRegistry (#51337)
* Wire Percentiles aggregator into new VS framework (#51639)
This required a bit of a refactor to percentiles itself. Before,
the Builder would switch on the chosen algo to generate an
algo-specific factory. This doesn't work (or at least, would be
difficult) in the new VS framework.
This refactor consolidates both factories together and introduces
a PercentilesConfig object to act as a standardized way to pass
algo-specific parameters through the factory. This object
is then used when deciding which kind of aggregator to create
Note: CoreValuesSourceType.HISTOGRAM still lives in core, and will
be moved in a subsequent PR.
* Remove generics and target value type from MultiVSAB (#51647)
* fix checkstyle after merge (#52008)
* Plumb ValuesSourceRegistry through to QuerySearchContext (#51710)
* Convert RareTerms to new VS registry (#52166)
* Wire up Value Count (#52225)
* Wire up Max & Min aggregations (#52219)
* ValuesSource refactoring: Wire up Sum aggregation (#52571)
* ValuesSource refactoring: Wire up SigTerms aggregation (#52590)
* Soft immutability for VSConfig (#52729)
* Unmute testSupportedFieldTypes, fix Percentiles/Ranks/Terms tests (#52734)
Also fixes Percentiles which was incorrectly specified to only accept
numeric, but in fact also accepts Boolean and Date (because those are
numeric on master - thanks `testSupportedFieldTypes` for catching it!)
* VS refactoring: Wire up stats aggregation (#52891)
* ValuesSource refactoring: Wire up string_stats aggregation (#52875)
* VS refactoring: Wire up median (MAD) aggregation (#52945)
* fix valuesourcetype issue with constant_keyword field (#53041)x-pack/plugin/rollup/src/main/java/org/elasticsearch/xpack/rollup/job/RollupIndexer.java
this commit implements `getValuesSourceType` for
the ConstantKeyword field type.
master was merged into feature/extensible-values-source
introducing a new field type that was not implementing
`getValuesSourceType`.
* ValuesSource refactoring: Wire up Avg aggregation (#52752)
* Wire PercentileRanks aggregator into new VS framework (#51693)
* Add a VSConfig resolver for aggregations not using the registry (#53038)
* Vs refactor wire up ranges and date ranges (#52918)
* Wire up geo_bounds aggregation to ValuesSourceRegistry (#53034)
This commit updates the geo_bounds aggregation to depend
on registering itself in the ValuesSourceRegistry
relates #42949.
* VS refactoring: convert Boxplot to new registry (#53132)
* Wire-up geotile_grid and geohash_grid to ValuesSourceRegistry (#53037)
This commit updates the geo*_grid aggregations to depend
on registering itself in the ValuesSourceRegistry
relates to the values-source refactoring meta issue #42949.
* Wire-up geo_centroid agg to ValuesSourceRegistry (#53040)
This commit updates the geo_centroid aggregation to depend
on registering itself in the ValuesSourceRegistry.
relates to the values-source refactoring meta issue #42949.
* Fix type tests for Missing aggregation (#53501)
* ValuesSource Refactor: move histo VSType into XPack module (#53298)
- Introduces a new API (`getBareAggregatorRegistrar()`) which allows plugins to register aggregations against existing agg definitions defined in Core.
- This moves the histogram VSType over to XPack where it belongs. `getHistogramValues()` still remains as a Core concept
- Moves the histo-specific bits over to xpack (e.g. the actual aggregator logic). This requires extra boilerplate since we need to create a new "Analytics" Percentile/Rank aggregators to deal with the histo field. Doubly-so since percentiles/ranks are extra boiler-plate'y... should be much lighter for other aggs
* Wire up DateHistogram to the ValuesSourceRegistry (#53484)
* Vs refactor parser cleanup (#53198)
Co-authored-by: Zachary Tong <polyfractal@elastic.co>
Co-authored-by: Zachary Tong <zach@elastic.co>
Co-authored-by: Christos Soulios <1561376+csoulios@users.noreply.github.com>
Co-authored-by: Tal Levy <JubBoy333@gmail.com>
* First batch of easy fixes
* Remove List.of from ValuesSourceRegistry
Note that we intend to have a follow up PR dealing with the mutability
of the registry, so I didn't even try to address that here.
* More compiler fixes
* More compiler fixes
* More compiler fixes
* Precommit is happy and so am I
* Add new Core VSTs to tests
* Disabled supported type test on SigTerms until we can backport it's fix
* fix checkstyle
* Fix test failure from semantic merge issue
* Fix some metaData->metadata replacements that got lost
* Fix list of supported types for MinAggregator
* Fix list of supported types for Avg
* remove unused import
Co-authored-by: Zachary Tong <polyfractal@elastic.co>
Co-authored-by: Zachary Tong <zach@elastic.co>
Co-authored-by: Christos Soulios <1561376+csoulios@users.noreply.github.com>
Co-authored-by: Tal Levy <JubBoy333@gmail.com>
Today the voting config exclusions API accepts node filters and resolves them
to a collection of node IDs against the current cluster membership.
This is problematic since we may want to exclude nodes that are not currently
members of the cluster. For instance:
- if attempting to remove a flaky node from the cluster you cannot reliably
exclude it from the voting configuration since it may not reliably be a
member of the cluster
- if `cluster.auto_shrink_voting_configuration: false` then naively shrinking
the cluster will remove some nodes but will leaving their node IDs in the
voting configuration. The only way to clean up the voting configuration is to
grow the cluster back to its original size (potentially replacing some of the
voting configuration) and then use the exclusions API.
This commit adds an alternative API that accepts node names and node IDs but
not node filters in general, and deprecates the current node-filters-based API.
Relates #47990.
Backport of #50836 to 7.x.
Co-authored-by: zacharymorn <zacharymorn@gmail.com>
I've noticed that a lot of our tests are using deprecated static methods
from the Hamcrest matchers. While this is not a big deal in any
objective sense, it seems like a small good thing to reduce compilation
warnings and be ready for a new release of the matcher library if we
need to upgrade. I've also switched a few other methods in tests that
have drop-in replacements.
Currently forbidden apis accounts for 800+ tasks in the build. These
tasks are aggressively created by the plugin. In forbidden apis 3.0, we
will get task avoidance
(https://github.com/policeman-tools/forbidden-apis/pull/162), but we
need to ourselves use the same task avoidance mechanisms to not trigger
these task creations. This commit does that for our foribdden apis
usages, in preparation for upgrading to 3.0 when it is released.
We can be a little more efficient when aborting a snapshot. Since we know the new repository
data after finalizing the aborted snapshot when can pass it down to the snapshot completion listeners.
This way, we don't have to fork off to the snapshot threadpool to get the repository data when the listener completes and can directly submit the delete task with high priority straight from the cluster state thread.
Provides basic repository-level stats that will allow us to get some insight into how many
requests are actually being made by the underlying SDK. Currently only tracks GET and LIST
calls for S3 repositories. Most of the code is unfortunately boiler plate to add a new endpoint
that will help us better understand some of the low-level dynamics of searchable snapshots.
This is a first cut at giving NodeInfo the ability to carry a flexible
list of heterogeneous info responses. The trick is to be able to
serialize and deserialize an arbitrary list of blocks of information. It
is convenient to be able to deserialize into usable Java objects so that
we can aggregate nodes stats for the cluster stats endpoint.
In order to provide a little bit of clarity about which objects can and
can't be used as info blocks, I've introduced a new interface called
"ReportingService."
I have removed the hard-coded getters (e.g., getOs()) in favor of a
flexible method that can return heterogeneous kinds of info blocks
(e.g., getInfo(OsInfo.class)). Taking a class as an argument removes the
need to cast in the client code.
We added a fancy method to provide random realistic test data to the
reduction tests in #54910. This uses that to remove some of the more
esoteric machinations in the agg tests. This will marginally increase
the coverage of the serialiation tests and, more importantly, remove
some mysterious value generation code that only really made sense for
random reduction tests but was used all over the place. It doesn't, on
the other hand, make the tests shorter. Just *hopefully* more clear.
I only cleaned up a few tests this way. If we like this it'd probably be
worth grabbing others.
Instead delete the data streams manually, until client yaml test runners
have been updated to also delete all data streams after each yaml test.
Relates to #53100
This commit introduces a new `geo` module that is intended
to be contain all the geo-spatial-specific features in server.
As a first step, the responsibility of registering the geo_shape
field mapper is moved to this module.
Co-authored-by: Nicholas Knize <nknize@gmail.com>
This commit moves the action name validation and circuit breaking into
the InboundAggregator. This work is valuable because it lays the
groundwork for incrementally circuit breaking as data is received.
This PR includes the follow behavioral change:
Handshakes contribute to circuit breaking, but cannot be broken. They
currently do not contribute nor are they broken.
Currently the TransportHandshaker has a specialized codepath for sending
a response. In other work, we are going to start having handshakes
contribute to circuit breaking (while not being breakable). This commit
moves in that direction by allowing the handshaker to responding using a
standard TcpTransportChannel similar to other requests.
This removes pipeline aggregators from the aggregation result tree
except for a single field used for backwards compatibility with pre-7.8
versions of Elasticsearch. That field isn't populated unless we are
serializing to pre-7.8 Elasticsearch. So, good news! We no longer build
pipeline aggregators on the data node. Most of the time.
This allows subclasses of `InternalAggregationTestCase` to make a `List`
of values to reduce so that it can make values that are realistic
*together*. The first use of this is with `InternalTTest` which uses it
to make results that don't cause their `sum` field to wrap. It'd likely
be useful for a ton of other aggs but just one for now.
`scripted_metric` did not work with cross cluster search because it
assumed that you'd never perform a partial reduction, serialize the
results, and then perform a final reduction. That
serialized-after-partial-reduction step was broken.
This is also required to support #54758.
This is a backport of #54803 for 7.x.
This pull request cherry picks the squashed commit from #54803 with the additional commits:
6f50c92 which adjusts master code to 7.x
a114549 to mute a failing ILM test (#54818)
48cbca1 and 50186b2 that cleans up and fixes the previous test
aae12bb that adds a missing feature flag (#54861)
6f330e3 that adds missing serialization bits (#54864)
bf72c02 that adjust the version in YAML tests
a51955f that adds some plumbing for the transport client used in integration tests
Co-authored-by: David Turner <david.turner@elastic.co>
Co-authored-by: Yannick Welsch <yannick@welsch.lu>
Co-authored-by: Lee Hinman <dakrone@users.noreply.github.com>
Co-authored-by: Andrei Dan <andrei.dan@elastic.co>
This should avoid REST failures caused by the inability to delete said
policy
Fix#54759
(cherry picked from commit 3ba5e02b713c03b1bdf14e0367a2bce68c35dd30)
We recently cleaned up the use of the word "metadata" across the
codebase. A few additional uses have trickled in, likely from
in-progress work. This commit cleans up these last few instances.
Relates #54519
Some field name constants were not updaten when we moved from "string" to "text"
and "keyword" fields. Renaming them makes it easier and faster to know which
field type is used in test subclassing this base test case.
Removes pipeline aggregations from the aggregation result tree as they
are no longer used. This stops us from building the pipeline aggregators
at all on data nodes except for backwards compatibility serialization.
This will save a tiny bit of space in the aggregation tree which is
lovely, but the biggest benefit is that it is a step towards simplifying
pipeline aggregators.
This only does about half of the work to remove the pipeline aggs from
the tree. Removing all of it would, well, double the size of the change
and make it harder to review.
This fixes pipeline aggregations used in cross cluster search from an older
version of Elasticsearch to a newer version of Elasticsearch. I broke
this in #53730 when I was too aggressive in shutting off serialization
of pipeline aggs. In particular, this comes up when the coordinating
node is pre-7.8.0 and the gateway node is on or after 7.8.0.
The fix is another step down the line to remove pipeline aggregators
from the aggregation tree. Sort of. It create a new
`List<PipelineAggregator>` member in `InternalAggregation` *but* it is
only used for bwc serialization and it is fed by the mechanism
established in #53730 to read the pipelines from the
Adds tests for supported ValuesSourceTypes, unmapped fields, scripting,
and the missing param. The tests for unmapped fields and scripting are
migrated from the StatsIT integration test
* Refactor nodes stats request builders to match requests (#54363)
* Remove hard-coded setters from NodesInfoRequestBuilder
* Remove hard-coded setters from NodesStatsRequest
* Use static imports to reduce clutter
* Remove uses of old info APIs
Use the same ES cluster as both an SP and an IDP and perform
IDP initiated and SP initiated SSO. The REST client plays the role
of both the Cloud UI and Kibana in these flows
Backport of #54215
* fix compilation issues
We previously checked for a 405 response, but on 7.x BWC tests may be hitting versions that don't
support the 405 response (returning 400 or 500), so be more lenient in those cases.
Relates to #54513
This is a follow up to a previous commit that renamed MetaData to
Metadata in all of the places. In that commit in master, we renamed
META_DATA to METADATA, but lost this on the backport. This commit
addresses that.
This is a simple naming change PR, to fix the fact that "metadata" is a
single English word, and for too long we have not followed general
naming conventions for it. We are also not consistent about it, for
example, METADATA instead of META_DATA if we were trying to be
consistent with MetaData (although METADATA is correct when considered
in the context of "metadata"). This was a simple find and replace across
the code base, only taking a few minutes to fix this naming issue
forever.
* Comprehensively test supported/unsupported field type:agg combinations (#52493)
This adds a test to AggregatorTestCase that allows us to programmatically
verify that an aggregator supports or does not support a particular
field type. It fetches the list of registered field type parsers,
creates a MappedFieldType from the parser and then attempts to run
a basic agg against the field.
A supplied list of supported VSTypes are then compared against the
output (success or exception) and suceeds or fails the test accordingly.
Co-Authored-By: Mark Tozzi <mark.tozzi@gmail.com>
* Skip fields that are not aggregatable
* Use newIndexSearcher() to avoid incompatible readers (#52723)
Lucene's `newSearcher()` can generate readers like ParallelCompositeReader
which we can't use. We need to instead use our helper `newIndexSearcher`
* Add warnings/errors when V2 templates would match same indices… (#54367)
* Add warnings/errors when V2 templates would match same indices as V1
With the introduction of V2 index templates, we want to warn users that templates they put in place
might not take precedence (because v2 templates are going to "win"). This adds this validation at
`PUT` time for both V1 and V2 templates with the following rules:
** When creating or updating a V2 template
- If the v2 template would match indices for an existing v1 template or templates, provide a
warning (through the deprecation logging so it shows up to the client) as well as logging the
warning
The v2 warning looks like:
```
index template [my-v2-template] has index patterns [foo-*] matching patterns from existing older
templates [old-v1-template,match-all-template] with patterns (old-v1-template =>
[foo*],match-all-template => [*]); this template [my-v2-template] will take
precedence during new index creation
```
** When creating a V1 template
- If the v1 template is for index patterns of `"*"` and a v2 template exists, warn that the v2
template may take precedence
- If the v1 template is for index patterns other than all indices, and a v2 template exists that
would match, throw an error preventing creation of the v1 template
** When updating a V1 template (without changing its existing `index_patterns`!)
- If the v1 template is for index patterns that would match an existing v2 template, warn that the
v2 template may take precedence.
The v1 warning looks like:
```
template [my-v1-template] has index patterns [*] matching patterns from existing index templates
[existing-v2-template] with patterns (existing-v2-template => [foo*]); this template [my-v1-template] may be ignored in favor of an index template at index creation time
```
And the v1 error looks like:
```
template [my-v1-template] has index patterns [foo*] matching patterns from existing index templates
[existing-v2-template] with patterns (existing-v2-template => [f*]), use index templates (/_index_template) instead
```
Relates to #53101
* Remove v2 index and component templates when cleaning up tests
* Finish half-finished comment sentence
* Guard template removal and ignore for earlier versions of ES
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
* Also ignore 500 errors when clearing index template v2 templates
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
Currently all of our transport protocol decoding and aggregation occurs
in the individual transport modules. This means that each implementation
(test, netty, nio) must implement this logic. Additionally, it means
that the entire message has been read from the network before the server
package receives it.
This commit creates a pipeline in server which can be passed arbitrary
bytes to handle. Internally, the pipeline will decode, decompress, and
aggregate the messages. Additionally, this allows us to run many
megabytes of bytes through the pipeline in tests to ensure that the
logic works.
This work will enable future work:
Circuit breaking or backoff logic based on message type and byte
in the content aggregator.
Sharing bytes with the application layer using the ref counted
releasable network bytes.
Improved network monitoring based specifically on channels.
Finally, this fixes the bug where we do not circuit break on the correct
message size when compression is enabled.
Changes ThreadPool's schedule method to run the schedule task in the context of the thread
that scheduled the task.
This is the more sensible default for this method, and eliminates a range of bugs where the
current thread context is mistakenly dropped.
Closes#17143
This drop the "top level" pipeline aggregators from the aggregation
result tree which should save a little memory and a few serialization
bytes. Perhaps more imporantly, this provides a mechanism by which we
can remove *all* pipelines from the aggregation result tree. This will
save quite a bit of space when pipelines are deep in the tree.
Sadly, doing this isn't simple because of backwards compatibility. Nodes
before 7.7.0 *need* those pipelines. We provide them by setting passing
a `Supplier<PipelineTree>` into the root of the aggregation tree that we
only call if we need to serialize to a version before 7.7.0.
This solution works for cross cluster search because we always reduce
the aggregations in each remote cluster and then forward them back to
the coordinating node. Its quite possible that the coordinating node
needs the pipeline (say it is version 7.1.0) and the gateway node in the
remote cluster doesn't (version 7.7.0). In that case the data nodes
won't send the pipeline aggregations back to the gateway node.
Critically, the gateway node *will* send the pipeline aggregations back
to the coordinating node. This is all managed with that
`Supplier<PipelineTree>`, but *how* it is managed is a bit tricky.
Fixes an issue where the elasticsearch-node command-line tools would not work correctly
because PersistentTasksCustomMetaData contains named XContent from plugins. This PR
makes it so that the parsing for all custom metadata is skipped, even if the core system would
know how to handle it.
Closes#53549
DocsClientYamlTestSuiteIT sometimes fails for CCR
related tests because tests are started before the license
is fully applied and active within the cluster. The first
tests to be executed then fails with the error noticed
in #53430. This can be easily reproduced locally by
only running CCR docs tests.
This commit adds some @Before logic in
DocsClientYamlTestSuiteIT so that it waits for the
license to be active before running CCR tests.
Closes#53430
This moves the pipeline aggregation validation from the data node to the
coordinating node so that we, eventually, can stop sending pipeline
aggregations to the data nodes entirely. In fact, it moves it into the
"request validation" stage so multiple errors can be accumulated and
sent back to the requester for the entire request. We can't always take
advantage of that, but it'll be nice for folks not to have to play
whack-a-mole with validation.
This is implemented by replacing `PipelineAggretionBuilder#validate`
with:
```
protected abstract void validate(ValidationContext context);
```
The `ValidationContext` handles the accumulation of validation failures,
provides access to the aggregation's siblings, and implements a few
validation utility methods.
Benchmarking showed that the effect of the ExitableDirectoryReader
is reduced considerably when checking every 8191 docs. Moreover,
set the cancellable task before calling QueryPhase#preProcess()
and make sure we don't wrap with an ExitableDirectoryReader at all
when lowLevelCancellation is set to false to avoid completely any
performance impact.
Follows: #52822
Follows: #53166
Follows: #53496
(cherry picked from commit cdc377e8e74d3ca6c231c36dc5e80621aab47c69)
Use sequence numbers and force merge UUID to determine whether a shard has changed or not instead before falling back to comparing files to get incremental snapshots on primary fail-over.
This change adds a "grant API key action"
POST /_security/api_key/grant
that creates a new API key using the privileges of one user ("the
system user") to execute the action, but creates the API key with
the roles of the second user ("the end user").
This allows a system (such as Kibana) to create API keys representing
the identity and access of an authenticated user without requiring
that user to have permission to create API keys on their own.
This also creates a new QA project for security on trial licenses and runs
the API key tests there
Backport of: #52886
Today in the `CoordinatorTests` each node uses multiple threadpools. This is
mostly fine as they are almost completely stateless, except for the
`ThreadContext`: by using multiple threadpools we cannot make assertions that
the thread context is/isn't preserved as we expect. This commit consolidates
the threadpool instances in use so that each node uses just one.
This fixes two issues:
1. Currently, the future here is never resolved on assertion error so a failing test would take a full minute
to complete until the future times out.
2. S3 tests overide this method to busy assert on this method. This only works if an assertion error makes it
to the calling thread.
Closes#53508
It's simple to deprecate a field used in an ObjectParser just by adding deprecation
markers to the relevant ParseField objects. The warnings themselves don't currently
have any context - they simply say that a deprecated field has been used, but not
where in the input xcontent it appears. This commit adds the parent object parser
name and XContentLocation to these deprecation messages.
Note that the context is automatically stripped from warning messages when they
are asserted on by integration tests and REST tests, because randomization of
xcontent type during these tests means that the XContentLocation is not constant
Today cluster states are sometimes (rarely) applied in the default context
rather than system context, which means that any appliers which capture their
contexts cannot do things like remote transport actions when security is
enabled.
There are at least two ways that we end up applying the cluster state in the
default context:
1. locally applying a cluster state that indicates that the master has failed
2. the elected master times out while waiting for a response from another node
This commit ensures that cluster states are always applied in the system
context.
Mitigates #53751
* Adds per context settings:
`script.context.${CONTEXT}.cache_max_size` ~
`script.cache.max_size`
`script.context.${CONTEXT}.cache_expire` ~
`script.cache.expire`
`script.context.${CONTEXT}.max_compilations_rate` ~
`script.max_compilations_rate`
* Context cache is used if:
`script.max_compilations_rate=use-context`. This
value is dynamically updatable, so users can
switch back to the general cache if desired.
* Settings for context caches take the first value
that applies:
1) Context specific settings if set, eg
`script.context.ingest.cache_max_size`
2) Correlated general setting is set to the non-default
value, eg `script.cache.max_size`
3) Context default
The reason for 2's inclusion is to allow an easy
transition for users who've customized their general
cache settings.
Using the general cache settings for the context caches
results in higher effective settings, since they are
multiplied across the number of contexts. So a general
cache max size of 200 will become 200 * # of contexts.
However, this behavior it will avoid users snapping to a
value that is too low for them.
Backport of: #52855
Refs: #50152
Re-applies the change from #53523 along with test fixes.
closes#53626closes#53624closes#53622closes#53625
Co-authored-by: Nik Everett <nik9000@gmail.com>
Co-authored-by: Lee Hinman <dakrone@users.noreply.github.com>
Co-authored-by: Jake Landis <jake.landis@elastic.co>
Today it can happen that a transport message fails to send (for example,
because a transport interceptor rejects the request). In this case, the
response handler is never invoked, which can lead to necessary cleanups
not being performed. There are two ways to handle this. One is to expect
every callsite that sends a message to try/catch these exceptions and
handle them appropriately. The other is merely to invoke the response
handler to handle the exception, which is already equipped to handle
transport exceptions.
This begins to clean up how `PipelineAggregator`s and executed.
Previously, we would create the `PipelineAggregator`s on the data nodes
and embed them in the aggregation tree. When it came time to execute the
pipeline aggregation we'd use the `PipelineAggregator`s that were on the
first shard's results. This is inefficient because:
1. The data node needs to make the `PipelineAggregator` only to
serialize it and then throw it away.
2. The coordinating node needs to deserialize all of the
`PipelineAggregator`s even though it only needs one of them.
3. You end up with many `PipelineAggregator` instances when you only
really *need* one per pipeline.
4. `PipelineAggregator` needs to implement serialization.
This begins to undo these by building the `PipelineAggregator`s directly
on the coordinating node and using those instead of the
`PipelineAggregator`s in the aggregtion tree. In a follow up change
we'll stop serializing the `PipelineAggregator`s to node versions that
support this behavior. And, one day, we'll be able to remove
`PipelineAggregator` from the aggregation result tree entirely.
Importantly, this doesn't change how pipeline aggregations are declared
or parsed or requested. They are still part of the `AggregationBuilder`
tree because *that* makes sense.
This change introduces a new API in x-pack basic that allows to track the progress of a search.
Users can submit an asynchronous search through a new endpoint called `_async_search` that
works exactly the same as the `_search` endpoint but instead of blocking and returning the final response when available, it returns a response after a provided `wait_for_completion` time.
````
GET my_index_pattern*/_async_search?wait_for_completion=100ms
{
"aggs": {
"date_histogram": {
"field": "@timestamp",
"fixed_interval": "1h"
}
}
}
````
If after 100ms the final response is not available, a `partial_response` is included in the body:
````
{
"id": "9N3J1m4BgyzUDzqgC15b",
"version": 1,
"is_running": true,
"is_partial": true,
"response": {
"_shards": {
"total": 100,
"successful": 5,
"failed": 0
},
"total_hits": {
"value": 1653433,
"relation": "eq"
},
"aggs": {
...
}
}
}
````
The partial response contains the total number of requested shards, the number of shards that successfully returned and the number of shards that failed.
It also contains the total hits as well as partial aggregations computed from the successful shards.
To continue to monitor the progress of the search users can call the get `_async_search` API like the following:
````
GET _async_search/9N3J1m4BgyzUDzqgC15b/?wait_for_completion=100ms
````
That returns a new response that can contain the same partial response than the previous call if the search didn't progress, in such case the returned `version`
should be the same. If new partial results are available, the version is incremented and the `partial_response` contains the updated progress.
Finally if the response is fully available while or after waiting for completion, the `partial_response` is replaced by a `response` section that contains the usual _search response:
````
{
"id": "9N3J1m4BgyzUDzqgC15b",
"version": 10,
"is_running": false,
"response": {
"is_partial": false,
...
}
}
````
Asynchronous search are stored in a restricted index called `.async-search` if they survive (still running) after the initial submit. Each request has a keep alive that defaults to 5 days but this value can be changed/updated any time:
`````
GET my_index_pattern*/_async_search?wait_for_completion=100ms&keep_alive=10d
`````
The default can be changed when submitting the search, the example above raises the default value for the search to `10d`.
`````
GET _async_search/9N3J1m4BgyzUDzqgC15b/?wait_for_completion=100ms&keep_alive=10d
`````
The time to live for a specific search can be extended when getting the progress/result. In the example above we extend the keep alive to 10 more days.
A background service that runs only on the node that holds the first primary shard of the `async-search` index is responsible for deleting the expired results. It runs every hour but the expiration is also checked by running queries (if they take longer than the keep_alive) and when getting a result.
Like a normal `_search`, if the http channel that is used to submit a request is closed before getting a response, the search is automatically cancelled. Note that this behavior is only for the submit API, subsequent GET requests will not cancel if they are closed.
Asynchronous search are not persistent, if the coordinator node crashes or is restarted during the search, the asynchronous search will stop. To know if the search is still running or not the response contains a field called `is_running` that indicates if the task is up or not. It is the responsibility of the user to resume an asynchronous search that didn't reach a final response by re-submitting the query. However final responses and failures are persisted in a system index that allows
to retrieve a response even if the task finishes.
````
DELETE _async_search/9N3J1m4BgyzUDzqgC15b
````
The response is also not stored if the initial submit action returns a final response. This allows to not add any overhead to queries that completes within the initial `wait_for_completion`.
The `.async-search` index is a restricted index (should be migrated to a system index in +8.0) that is accessible only through the async search APIs. These APIs also ensure that only the user that submitted the initial query can retrieve or delete the running search. Note that admins/superusers would still be able to cancel the search task through the task manager like any other tasks.
Relates #49091
Co-authored-by: Luca Cavanna <javanna@users.noreply.github.com>
Using a Long alone is not strong enough for the id of search contexts
because we reset the id generator whenever a data node is restarted.
This can lead to two issues:
1. Fetch phase can fetch documents from another index
2. A scroll search can return documents from another index
This commit avoids these issues by adding a UUID to SearchContexId.
This commit introduces hidden aliases. These are similar to hidden
indices, in that they are not visible by default, unless explicitly
specified by name or by indicating that hidden indices/aliases are
desired.
The new alias property, `is_hidden` is implemented similarly to
`is_write_index`, except that it must be consistent across all indices
with a given alias - that is, all indices with a given alias must
specify the alias as either hidden, or all specify it as non-hidden,
either explicitly or by omitting the `is_hidden` property.
This commit updates the template used for watch history indices with
the hidden index setting so that new indices will be created as hidden.
Relates #50251
Backport of #52962
When we test backwards compatibility we often end up in a situation
where we *sometimes* get a warning, and sometimes don't. Like, we won't
get the warning if we're testing against an older version, but we will
in a newer one. Or we won't get the warning if the request randomly
lands on a node with an old version of the code. But we wouldn't if it
randomed into a node with newer code.
This adds `allowed_warnings` to our yaml test runner for those cases:
warnings declared this way are "allowed" but not "required".
Blocks #52959
Co-authored-by: Benjamin Trent <ben.w.trent@gmail.com>
Implement an Exitable DirectoryReader that wraps the original
DirectoryReader so that when a search task is cancelled the
DirectoryReaders also stop their work fast. This is usuful for
expensive operations like wilcard/prefix queries where the
DirectoryReaders can spend lots of time and consume resources,
as previously their work wouldn't stop even though the original
search task was cancelled (e.g. because of timeout or dropped client
connection).
(cherry picked from commit 67acaf61f33bc5f54e26541514d07e375c202e03)
Tests in GoogleCloudStorageBlobStoreRepositoryTests are known
to be flaky on JDK 8 (#51446, #52430 ) and we suspect a JDK
bug (https://bugs.openjdk.java.net/browse/JDK-8180754) that triggers
some assertion on the server side logic that emulates the Google
Cloud Storage service.
Sadly we were not able to reproduce the failures, even when using
the same OS (Debian 9, Ubuntu 16.04) and JDK (Oracle Corporation
1.8.0_241 [Java HotSpot(TM) 64-Bit Server VM 25.241-b07]) of
almost all the test failures on CI. While we spent some time fixing
code (#51933, #52431) to circumvent the JDK bug they are still flaky
on JDK-8. This commit mute these tests for JDK-8 only.
Close ##52906
This commit introduces a module for Kibana that exposes REST APIs that
will be used by Kibana for access to its system indices. These APIs are wrapped
versions of the existing REST endpoints. A new setting is also introduced since
the Kibana system indices' names are allowed to be changed by a user in case
multiple instances of Kibana use the same instance of Elasticsearch.
Additionally, the ThreadContext has been extended to indicate that the use of
system indices may be allowed in a request. This will be built upon in the future
for the protection of system indices.
Backport of #52385
Generalize how queries on `_index` are handled at rewrite time (#52486)
Since this change refactors rewrites, I also took it as an opportunity to adrress #49254: instead of returning the same queries you would get on a keyword field when a field is unmapped, queries get rewritten to a MatchNoDocsQueryBuilder.
This change exposed a couple bugs, like the fact that the percolator doesn't rewrite queries at query time, or that the significant_terms aggregation doesn't rewrite its inner filter, which I fixed.
Closes#49254
In #42838 we moved the terms index of all fields off-heap except the
`_id` field because we were worried it might make indexing slower. In
general, the indexing rate is only affected if explicit IDs are used, as
otherwise Elasticsearch almost never performs lookups in the terms
dictionary for the purpose of indexing. So it's quite wasteful to
require the terms index of `_id` to be loaded on-heap for users who have
append-only workloads. Furthermore I've been conducting benchmarks when
indexing with explicit ids on the http_logs dataset that suggest that
the slowdown is low enough that it's probably not worth forcing the terms
index to be kept on-heap. Here are some numbers for the median indexing
rate in docs/s:
| Run | Master | Patch |
| --- | ------- | ------- |
| 1 | 45851.2 | 46401.4 |
| 2 | 45192.6 | 44561.0 |
| 3 | 45635.2 | 44137.0 |
| 4 | 46435.0 | 44692.8 |
| 5 | 45829.0 | 44949.0 |
And now heap usage in MB for segments:
| Run | Master | Patch |
| --- | ------- | -------- |
| 1 | 41.1720 | 0.352083 |
| 2 | 45.1545 | 0.382534 |
| 3 | 41.7746 | 0.381285 |
| 4 | 45.3673 | 0.412737 |
| 5 | 45.4616 | 0.375063 |
Indexing rate decreased by 1.8% on average, while memory usage decreased
by more than 100x.
The `http_logs` dataset contains small documents and has a simple
indexing chain. More complex indexing chains, e.g. with more fields,
ingest pipelines, etc. would see an even lower decrease of indexing rate.
We consider index level read_only_allow_delete blocks temporary since
the DiskThresholdMonitor can automatically release those when an index
is no longer allocated on nodes above high threshold.
The rest status has therefore been changed to 429 when encountering this
index block to signal retryability to clients.
Related to #49393
This commit renames ElasticsearchAssertions#assertThrows to
assertRequestBuilderThrows and assertFutureThrows to avoid a
naming clash with JUnit 4.13+ and static imports of these methods.
Additionally, these methods have been updated to make use of
expectThrows internally to avoid duplicating the logic there.
Relates #51787
Backport of #52582
Phase 1 of adding compilation limits per context.
* Refactor rate limiting and caching into separate class,
`ScriptCache`, which will be used per context.
* Disable compilation limit for certain tests.
Backport of 0866031
Refs: #50152
Cache latest `RepositoryData` on heap when it's absolutely safe to do so (i.e. when the repository is in strictly consistent mode).
`RepositoryData` can safely be assumed to not grow to a size that would cause trouble because we often have at least two copies of it loaded at the same time when doing repository operations. Also, concurrent snapshot API status requests currently load it independently of each other and so on, making it safe to cache on heap and assume as "small" IMO.
The benefits of this move are:
* Much faster repository status API calls
* listing all snapshot names becomes instant
* Other operations are sped up massively too because they mostly operate in two steps: load repository data then load multiple other blobs to get the additional data
* Additional cloud cost savings
* Better resiliency, saving another spot where an IO issue could break the snapshot
* We can simplify a number of spots in the current code that currently pass around the repository data in tricky ways to avoid loading it multiple times in follow ups.
* Refactor Inflexible Snapshot Repository BwC (#52365)
Transport the version to use for a snapshot instead of whether to use shard generations in the snapshots in progress entry. This allows making upcoming repository metadata changes in a flexible manner in an analogous way to how we handle serialization BwC elsewhere.
Also, exposing the version at the repository API level will make it easier to do BwC relevant changes in derived repositories like source only or encrypted.
Currently we have three different implementations representing a
`ConnectionManager`. There is the basic `ConnectionManager` which
holds all connections for a cluster. And a remote connection manager
which support proxy behavior. And a stubbable connection manager for
tests. The remote and stubbable instances use the delegate pattern,
so this commit extracts an interface for them all to implement.
It looks like #52000 is caused by a slowdown in cluster state application
(maybe due to #50907) but I would like to understand the details to ensure that
there's nothing else going on here too before simply increasing the timeout.
This commit enables some relevant `DEBUG` loggers and also captures stack
traces from all threads rather than just the three hottest ones.
Closes#52450. `setRandomIndexSettings(...)` in `ESIntegTestCase` was
using both a thread-local and a supplied source of randomness. Fix this
method to only use the supplied source.
The `top_metrics` agg is kind of like `top_hits` but it only works on
doc values so it *should* be faster.
At this point it is fairly limited in that it only supports a single,
numeric sort and a single, numeric metric. And it only fetches the "very
topest" document worth of metric. We plan to support returning a
configurable number of top metrics, requesting more than one metric and
more than one sort. And, eventually, non-numeric sorts and metrics. The
trick is doing those things fairly efficiently.
Co-Authored by: Zachary Tong <zach@elastic.co>
This commit makes the names of fetch subphases more consistent:
* Now the names end in just 'Phase', whereas before some ended in
'FetchSubPhase'. This matches the query subphases like AggregationPhase.
* Some names include 'fetch' like FetchScorePhase to avoid ambiguity about what
they do.
This adds a builder and parsed results for the `string_stats`
aggregation directly to the high level rest client. Without this the
HLRC can't access the `string_stats` API without the elastic licensed
`analytics` module.
While I'm in there this adds a few of our usual unit tests and
modernizes the parsing.
Add a new cluster setting `search.allow_expensive_queries` which by
default is `true`. If set to `false`, certain queries that have
usually slow performance cannot be executed and an error message
is returned.
- Queries that need to do linear scans to identify matches:
- Script queries
- Queries that have a high up-front cost:
- Fuzzy queries
- Regexp queries
- Prefix queries (without index_prefixes enabled
- Wildcard queries
- Range queries on text and keyword fields
- Joining queries
- HasParent queries
- HasChild queries
- ParentId queries
- Nested queries
- Queries on deprecated 6.x geo shapes (using PrefixTree implementation)
- Queries that may have a high per-document cost:
- Script score queries
- Percolate queries
Closes: #29050
(cherry picked from commit a8b39ed842c7770bd9275958c9f747502fd9a3ea)
Modifies SLM's and ILM's history indices to be hidden indices for added
protection against accidental querying and deletion, and improves
IndexTemplateRegistry to handle upgrading index templates.
Also modifies the REST test cleanup to delete hidden indices.
Today we use `cluster.join.timeout` to prevent nodes from waiting indefinitely
if joining a faulty master that is too slow to respond, and
`cluster.publish.timeout` to allow a faulty master to detect that it is unable
to publish its cluster state updates in a timely fashion. If these timeouts
occur then the node restarts the discovery process in an attempt to find a
healthier master.
In the special case of `discovery.type: single-node` there is no point in
looking for another healthier master since the single node in the cluster is
all we've got. This commit suppresses these timeouts and instead lets the node
wait for joins and publications to succeed no matter how long this might take.
We can just put the `IndexId` instead of just the index name into the recovery soruce and
save one load of `RepositoryData` on each shard restore that way.
While we use `== false` as a more visible form of boolean negation
(instead of `!`), the true case is implied and the true value does not
need to explicitly checked. This commit converts cases that have slipped
into the code checking for `== true`.
This commit moves the logic that cancels search requests when the rest channel is closed
to a generic client that can be used by other APIs. This will be useful for any rest action
that wants to cancel the execution of a task if the underlying rest channel is closed by the
client before completion.
Relates #49931
Relates #50990
Relates #50990
* Allow Repository Plugins to Filter Metadata on Create
Add a hook that allows repository plugins to filter the repository metadata
before it gets written to the cluster state.
The docs tests have recently been running much slower than before (see #49753).
The gist here is that with ILM/SLM we do a lot of unnecessary setup / teardown work on each
test. Compounded with the slightly slower cluster state storage mechanism, this causes the
tests to run much slower.
In particular, on RAMDisk, docs:check is taking
ES 7.4: 6:55 minutes
ES master: 16:09 minutes
ES with this commit: 6:52 minutes
on SSD, docs:check is taking
ES 7.4: ??? minutes
ES master: 32:20 minutes
ES with this commit: 11:21 minutes
* Reload secure settings with password (#43197)
If a password is not set, we assume an empty string to be
compatible with previous behavior.
Only allow the reload to be broadcast to other nodes if TLS is
enabled for the transport layer.
* Add passphrase support to elasticsearch-keystore (#38498)
This change adds support for keystore passphrases to all subcommands
of the elasticsearch-keystore cli tool and adds a subcommand for
changing the passphrase of an existing keystore.
The work to read the passphrase in Elasticsearch when
loading, which will be addressed in a different PR.
Subcommands of elasticsearch-keystore can handle (open and create)
passphrase protected keystores
When reading a keystore, a user is only prompted for a passphrase
only if the keystore is passphrase protected.
When creating a keystore, a user is allowed (default behavior) to create one with an
empty passphrase
Passphrase can be set to be empty when changing/setting it for an
existing keystore
Relates to: #32691
Supersedes: #37472
* Restore behavior for force parameter (#44847)
Turns out that the behavior of `-f` for the add and add-file sub
commands where it would also forcibly create the keystore if it
didn't exist, was by design - although undocumented.
This change restores that behavior auto-creating a keystore that
is not password protected if the force flag is used. The force
OptionSpec is moved to the BaseKeyStoreCommand as we will presumably
want to maintain the same behavior in any other command that takes
a force option.
* Handle pwd protected keystores in all CLI tools (#45289)
This change ensures that `elasticsearch-setup-passwords` and
`elasticsearch-saml-metadata` can handle a password protected
elasticsearch.keystore.
For setup passwords the user would be prompted to add the
elasticsearch keystore password upon running the tool. There is no
option to pass the password as a parameter as we assume the user is
present in order to enter the desired passwords for the built-in
users.
For saml-metadata, we prompt for the keystore password at all times
even though we'd only need to read something from the keystore when
there is a signing or encryption configuration.
* Modify docs for setup passwords and saml metadata cli (#45797)
Adds a sentence in the documentation of `elasticsearch-setup-passwords`
and `elasticsearch-saml-metadata` to describe that users would be
prompted for the keystore's password when running these CLI tools,
when the keystore is password protected.
Co-Authored-By: Lisa Cawley <lcawley@elastic.co>
* Elasticsearch keystore passphrase for startup scripts (#44775)
This commit allows a user to provide a keystore password on Elasticsearch
startup, but only prompts when the keystore exists and is encrypted.
The entrypoint in Java code is standard input. When the Bootstrap class is
checking for secure keystore settings, it checks whether or not the keystore
is encrypted. If so, we read one line from standard input and use this as the
password. For simplicity's sake, we allow a maximum passphrase length of 128
characters. (This is an arbitrary limit and could be increased or eliminated.
It is also enforced in the keystore tools, so that a user can't create a
password that's too long to enter at startup.)
In order to provide a password on standard input, we have to account for four
different ways of starting Elasticsearch: the bash startup script, the Windows
batch startup script, systemd startup, and docker startup. We use wrapper
scripts to reduce systemd and docker to the bash case: in both cases, a
wrapper script can read a passphrase from the filesystem and pass it to the
bash script.
In order to simplify testing the need for a passphrase, I have added a
has-passwd command to the keystore tool. This command can run silently, and
exit with status 0 when the keystore has a password. It exits with status 1 if
the keystore doesn't exist or exists and is unencrypted.
A good deal of the code-change in this commit has to do with refactoring
packaging tests to cleanly use the same tests for both the "archive" and the
"package" cases. This required not only moving tests around, but also adding
some convenience methods for an abstraction layer over distribution-specific
commands.
* Adjust docs for password protected keystore (#45054)
This commit adds relevant parts in the elasticsearch-keystore
sub-commands reference docs and in the reload secure settings API
doc.
* Fix failing Keystore Passphrase test for feature branch (#50154)
One problem with the passphrase-from-file tests, as written, is that
they would leave a SystemD environment variable set when they failed,
and this setting would cause elasticsearch startup to fail for other
tests as well. By using a try-finally, I hope that these tests will fail
more gracefully.
It appears that our Fedora and Ubuntu environments may be configured to
store journald information under /var rather than under /run, so that it
will persist between boots. Our destructive tests that read from the
journal need to account for this in order to avoid trying to limit the
output we check in tests.
* Run keystore management tests on docker distros (#50610)
* Add Docker handling to PackagingTestCase
Keystore tests need to be able to run in the Docker case. We can do this
by using a DockerShell instead of a plain Shell when Docker is running.
* Improve ES startup check for docker
Previously we were checking truncated output for the packaged JDK as
an indication that Elasticsearch had started. With new preliminary
password checks, we might get a false positive from ES keystore
commands, so we have to check specifically that the Elasticsearch
class from the Bootstrap package is what's running.
* Test password-protected keystore with Docker (#50803)
This commit adds two tests for the case where we mount a
password-protected keystore into a Docker container and provide a
password via a Docker environment variable.
We also fix a logging bug where we were logging the identifier for an
array of strings rather than the contents of that array.
* Add documentation for keystore startup prompting (#50821)
When a keystore is password-protected, Elasticsearch will prompt at
startup. This commit adds documentation for this prompt for the archive,
systemd, and Docker cases.
Co-authored-by: Lisa Cawley <lcawley@elastic.co>
* Warn when unable to upgrade keystore on debian (#51011)
For Red Hat RPM upgrades, we warn if we can't upgrade the keystore. This
commit brings the same logic to the code for Debian packages. See the
posttrans file for gets executed for RPMs.
* Restore handling of string input
Adds tests that were mistakenly removed. One of these tests proved
we were not handling the the stdin (-x) option correctly when no
input was added. This commit restores the original approach of
reading stdin one char at a time until there is no more (-1, \r, \n)
instead of using readline() that might return null
* Apply spotless reformatting
* Use '--since' flag to get recent journal messages
When we get Elasticsearch logs from journald, we want to fetch only log
messages from the last run. There are two reasons for this. First, if
there are many logs, we might get a string that's too large for our
utility methods. Second, when we're looking for a specific message or
error, we almost certainly want to look only at messages from the last
execution.
Previously, we've been trying to do this by clearing out the physical
files under the journald process. But there seems to be some contention
over these directories: if journald writes a log file in between when
our deletion command deletes the file and when it deletes the log
directory, the deletion will fail.
It seems to me that we might be able to use journald's "--since" flag to
retrieve only log messages from the last run, and that this might be
less likely to fail due to race conditions in file deletion.
Unfortunately, it looks as if the "--since" flag has a granularity of
one-second. I've added a two-second sleep to make sure that there's a
sufficient gap between the test that will read from journald and the
test before it.
* Use new journald wrapper pattern
* Update version added in secure settings request
Co-authored-by: Lisa Cawley <lcawley@elastic.co>
Co-authored-by: Ioannis Kakavas <ikakavas@protonmail.com>
This commit sets `xpack.security.ssl.diagnose.trust` to false in all
of our tests when running in FIPS 140 mode and when settings objects
are used to create an instance of the SSLService. This is needed
in 7.x because setting xpack.security.ssl.diagnose.trust to true
wraps SunJSSE TrustManager with our own DiagnosticTrustManager and
this is not allowed when SunJSSE is in FIPS mode.
An alternative would be to set xpack.security.fips.enabled to
true which would also implicitly disable
xpack.security.ssl.diagnose.trust but would have additional effects
(would require that we set PBKDF2 for password hashing algorithm in
all test clusters, would prohibit using JKS keystores in nodes even
if relevant tests have been muted in FIPS mode etc.)
Relates: #49900Resolves: #51268
This change changes the way to run our test suites in
JVMs configured in FIPS 140 approved mode. It does so by:
- Configuring any given runtime Java in FIPS mode with the bundled
policy and security properties files, setting the system
properties java.security.properties and java.security.policy
with the == operator that overrides the default JVM properties
and policy.
- When runtime java is 11 and higher, using BouncyCastle FIPS
Cryptographic provider and BCJSSE in FIPS mode. These are
used as testRuntime dependencies for unit
tests and internal clusters, and copied (relevant jars)
explicitly to the lib directory for testclusters used in REST tests
- When runtime java is 8, using BouncyCastle FIPS
Cryptographic provider and SunJSSE in FIPS mode.
Running the tests in FIPS 140 approved mode doesn't require an
additional configuration either in CI workers or locally and is
controlled by specifying -Dtests.fips.enabled=true
This reverts commit c7fd24ca1569a809b499caf34077599e463bb8d6.
Now that JDK-8236582 is fixed in JDK 14 EA, we can revert the workaround.
Relates #50523 and #50512
LuceneChangesSnapshot can be slow if nested documents are heavily used.
Also, it estimates the number of operations to be recovered in peer
recoveries inaccurately. With this change, we prefer excluding the
nested non-root documents in a Lucene query instead.
* Fix Rest Tests Failing to Cleanup Rollup Jobs
If the rollup jobs index doesn't exist for some reason (like running against a 6.x cluster)
we should just assume the jobs have been cleaned up and move on.
Closes#50819
Adding back accidentally removed jvm option that is required to enforce
start of the week = Monday in IsoCalendarDataProvider.
Adding a `feature` to yml test in order to skip running it in JDK8
commit that removed it 398c802
commit that backports SystemJvmOptions c4fbda3
relates 7.x backport of code that enforces CalendarDataProvider use #48349
This change introduces a new feature for indices so that they can be
hidden from wildcard expansion. The feature is referred to as hidden
indices. An index can be marked hidden through the use of an index
setting, `index.hidden`, at creation time. One primary use case for
this feature is to have a construct that fits indices that are created
by the stack that contain data used for display to the user and/or
intended for querying by the user. The desire to keep them hidden is
to avoid confusing users when searching all of the data they have
indexed and getting results returned from indices created by the
system.
Hidden indices have the following properties:
* API calls for all indices (empty indices array, _all, or *) will not
return hidden indices by default.
* Wildcard expansion will not return hidden indices by default unless
the wildcard pattern begins with a `.`. This behavior is similar to
shell expansion of wildcards.
* REST API calls can enable the expansion of wildcards to hidden
indices with the `expand_wildcards` parameter. To expand wildcards
to hidden indices, use the value `hidden` in conjunction with `open`
and/or `closed`.
* Creation of a hidden index will ignore global index templates. A
global index template is one with a match-all pattern.
* Index templates can make an index hidden, with the exception of a
global index template.
* Accessing a hidden index directly requires no additional parameters.
Backport of #50452
Check it out:
```
$ curl -u elastic:password -HContent-Type:application/json -XPOST localhost:9200/test/_update/foo?pretty -d'{
"dac": {}
}'
{
"error" : {
"root_cause" : [
{
"type" : "x_content_parse_exception",
"reason" : "[2:3] [UpdateRequest] unknown field [dac] did you mean [doc]?"
}
],
"type" : "x_content_parse_exception",
"reason" : "[2:3] [UpdateRequest] unknown field [dac] did you mean [doc]?"
},
"status" : 400
}
```
The tricky thing about implementing this is that x-content doesn't
depend on Lucene. So this works by creating an extension point for the
error message using SPI. Elasticsearch's server module provides the
"spell checking" implementation.
s
* Track Snapshot Version in RepositoryData (#50930)
Add tracking of snapshot versions to RepositoryData to make BwC logic more efficient.
Follow up to #50853
There is a JVM bug causing `Thread#suspend` calls to randomly take
multiple seconds breaking these tests that call the method numerous times
in a loop. Increasing the timeout would will not work since we may call
`suspend` tens if not hundreds of times and even a small number of them
experiencing the blocking will lead to multiple minutes of waiting.
This PR detects the specific issue by timing the `Thread#suspend` calls and
skips the remainder of the test if it timed out because of the JVM bug.
Closes#50047
* Move metadata storage to Lucene (#50907)
Today we split the on-disk cluster metadata across many files: one file for the metadata of each
index, plus one file for the global metadata and another for the manifest. Most metadata updates
only touch a few of these files, but some must write them all. If a node holds a large number of
indices then it's possible its disks are not fast enough to process a complete metadata update before timing out. In severe cases affecting master-eligible nodes this can prevent an election
from succeeding.
This commit uses Lucene as a metadata storage for the cluster state, and is a squashed version
of the following PRs that were targeting a feature branch:
* Introduce Lucene-based metadata persistence (#48733)
This commit introduces `LucenePersistedState` which master-eligible nodes
can use to persist the cluster metadata in a Lucene index rather than in
many separate files.
Relates #48701
* Remove per-index metadata without assigned shards (#49234)
Today on master-eligible nodes we maintain per-index metadata files for every
index. However, we also keep this metadata in the `LucenePersistedState`, and
only use the per-index metadata files for importing dangling indices. However
there is no point in importing a dangling index without any shard data, so we
do not need to maintain these extra files any more.
This commit removes per-index metadata files from nodes which do not hold any
shards of those indices.
Relates #48701
* Use Lucene exclusively for metadata storage (#50144)
This moves metadata persistence to Lucene for all node types. It also reenables BWC and adds
an interoperability layer for upgrades from prior versions.
This commit disables a number of tests related to dangling indices and command-line tools.
Those will be addressed in follow-ups.
Relates #48701
* Add command-line tool support for Lucene-based metadata storage (#50179)
Adds command-line tool support (unsafe-bootstrap, detach-cluster, repurpose, & shard
commands) for the Lucene-based metadata storage.
Relates #48701
* Use single directory for metadata (#50639)
Earlier PRs for #48701 introduced a separate directory for the cluster state. This is not needed
though, and introduces an additional unnecessary cognitive burden to the users.
Co-Authored-By: David Turner <david.turner@elastic.co>
* Add async dangling indices support (#50642)
Adds support for writing out dangling indices in an asynchronous way. Also provides an option to
avoid writing out dangling indices at all.
Relates #48701
* Fold node metadata into new node storage (#50741)
Moves node metadata to uses the new storage mechanism (see #48701) as the authoritative source.
* Write CS asynchronously on data-only nodes (#50782)
Writes cluster states out asynchronously on data-only nodes. The main reason for writing out
the cluster state at all is so that the data-only nodes can snap into a cluster, that they can do a
bit of bootstrap validation and so that the shard recovery tools work.
Cluster states that are written asynchronously have their voting configuration adapted to a non
existing configuration so that these nodes cannot mistakenly become master even if their node
role is changed back and forth.
Relates #48701
* Remove persistent cluster settings tool (#50694)
Adds the elasticsearch-node remove-settings tool to remove persistent settings from the on
disk cluster state in case where it contains incompatible settings that prevent the cluster from
forming.
Relates #48701
* Make cluster state writer resilient to disk issues (#50805)
Adds handling to make the cluster state writer resilient to disk issues. Relates to #48701
* Omit writing global metadata if no change (#50901)
Uses the same optimization for the new cluster state storage layer as the old one, writing global
metadata only when changed. Avoids writing out the global metadata if none of the persistent
fields changed. Speeds up server:integTest by ~10%.
Relates #48701
* DanglingIndicesIT should ensure node removed first (#50896)
These tests occasionally failed because the deletion was submitted before the
restarting node was removed from the cluster, causing the deletion not to be
fully acked. This commit fixes this by checking the restarting node has been
removed from the cluster.
Co-authored-by: David Turner <david.turner@elastic.co>
* fix tests
Co-authored-by: David Turner <david.turner@elastic.co>
* Fix Snapshot Repository Corruption in Downgrade Scenarios (#50692)
This PR introduces test infrastructure for downgrading a cluster while interacting with a given repository.
It fixes the fact that repository metadata in the new format could be written while there's still older snapshots in the repository that require the old-format metadata to be restorable.
It's impossible to tell why #50754 fails without this change.
We're failing to close the `exchange` somewhere and there is no
write timeout in the GCS SDK (something to look into separately)
only a read timeout on the socket so if we're failing on an assertion without
reading the full request body (at least into the read-buffer) we're locking up
waiting forever on `write0`.
This change ensure the `exchange` is closed in the tests where we could lock up
on a write and logs the failure so we can find out what broke #50754.
This PR adds per-field metadata that can be set in the mappings and is later
returned by the field capabilities API. This metadata is completely opaque to
Elasticsearch but may be used by tools that index data in Elasticsearch to
communicate metadata about fields with tools that then search this data. A
typical example that has been requested in the past is the ability to attach
a unit to a numeric field.
In order to not bloat the cluster state, Elasticsearch requires that this
metadata be small:
- keys can't be longer than 20 chars,
- values can only be numbers or strings of no more than 50 chars - no inner
arrays or objects,
- the metadata can't have more than 5 keys in total.
Given that metadata is opaque to Elasticsearch, field capabilities don't try to
do anything smart when merging metadata about multiple indices, the union of
all field metadatas is returned.
Here is how the meta might look like in mappings:
```json
{
"properties": {
"latency": {
"type": "long",
"meta": {
"unit": "ms"
}
}
}
}
```
And then in the field capabilities response:
```json
{
"latency": {
"long": {
"searchable": true,
"aggreggatable": true,
"meta": {
"unit": [ "ms" ]
}
}
}
}
```
When there are no conflicts, values are arrays of size 1, but when there are
conflicts, Elasticsearch includes all unique values in this array, without
giving ways to know which index has which metadata value:
```json
{
"latency": {
"long": {
"searchable": true,
"aggreggatable": true,
"meta": {
"unit": [ "ms", "ns" ]
}
}
}
}
```
Closes#33267
Introduce a new static setting, `gateway.auto_import_dangling_indices`, which prevents dangling indices from being automatically imported. Part of #48366.
This test seems to be bogus as it was confusing a nominal execution time with a
delay (i.e. an elapsed time). This commit reworks the test to address this.
Fixes#50650
* Fix GCS Mock Broken Handling of some Blobs
We were incorrectly handling blobs starting in `\r\n` which broke
tests randomly when blobs started on these.
Relates #49429
* Adds JavaDoc to `AbstractWireTestCase` and
`AbstractWireSerializingTestCase` so it is more obvious you should prefer
the latter if you have a choice
* Moves the `instanceReader` method out of `AbstractWireTestCase` becaue
it is no longer used.
* Marks a bunch of methods final so it is more obvious which classes are
for what.
* Cleans up the side effects of the above.
The additional change to the original PR (#49657), is that `org.elasticsearch.client.cluster.RemoteConnectionInfo` now parses the initial_connect_timeout field as a string instead of a TimeValue instance.
The reason that this is needed is because that the initial_connect_timeout field in the remote connection api is serialized for human consumption, but not for parsing purposes.
Therefore the HLRC can't parse it correctly (which caused test failures in CI, but not in the PR CI
:( ). The way this field is serialized needs to be changed in the remote connection api, but that is a breaking change. We should wait making this change until rest api versioning is introduced.
Co-Authored-By: j-bean <anton.shuvaev91@gmail.com>
Co-authored-by: j-bean <anton.shuvaev91@gmail.com>
Today, the replica allocator uses peer recovery retention leases to
select the best-matched copies when allocating replicas of indices with
soft-deletes. We can employ this mechanism for indices without
soft-deletes because the retaining sequence number of a PRRL is the
persisted global checkpoint (plus one) of that copy. If the primary and
replica have the same retaining sequence number, then we should be able
to perform a noop recovery. The reason is that we must be retaining
translog up to the local checkpoint of the safe commit, which is at most
the global checkpoint of either copy). The only limitation is that we
might not cancel ongoing file-based recoveries with PRRLs for noop
recoveries. We can't make the translog retention policy comply with
PRRLs. We also have this problem with soft-deletes if a PRRL is about to
expire.
Relates #45136
Relates #46959
We need to make sure that the global checkpoints and peer recovery
retention leases were advanced to the max_seq_no and synced; otherwise,
we can risk expiring some peer recovery retention leases because of the
file-based recovery threshold.
Relates #49448
* Add ILM histore store index (#50287)
* Add ILM histore store index
This commit adds an ILM history store that tracks the lifecycle
execution state as an index progresses through its ILM policy. ILM
history documents store output similar to what the ILM explain API
returns.
An example document with ALL fields (not all documents will have all
fields) would look like:
```json
{
"@timestamp": 1203012389,
"policy": "my-ilm-policy",
"index": "index-2019.1.1-000023",
"index_age":123120,
"success": true,
"state": {
"phase": "warm",
"action": "allocate",
"step": "ERROR",
"failed_step": "update-settings",
"is_auto-retryable_error": true,
"creation_date": 12389012039,
"phase_time": 12908389120,
"action_time": 1283901209,
"step_time": 123904107140,
"phase_definition": "{\"policy\":\"ilm-history-ilm-policy\",\"phase_definition\":{\"min_age\":\"0ms\",\"actions\":{\"rollover\":{\"max_size\":\"50gb\",\"max_age\":\"30d\"}}},\"version\":1,\"modified_date_in_millis\":1576517253463}",
"step_info": "{... etc step info here as json ...}"
},
"error_details": "java.lang.RuntimeException: etc\n\tcaused by:etc etc etc full stacktrace"
}
```
These documents go into the `ilm-history-1-00000N` index to provide an
audit trail of the operations ILM has performed.
This history storage is enabled by default but can be disabled by setting
`index.lifecycle.history_index_enabled` to `false.`
Resolves#49180
* Make ILMHistoryStore.putAsync truly async (#50403)
This moves the `putAsync` method in `ILMHistoryStore` never to block.
Previously due to the way that the `BulkProcessor` works, it was possible
for `BulkProcessor#add` to block executing a bulk request. This was bad
as we may be adding things to the history store in cluster state update
threads.
This also moves the index creation to be done prior to the bulk request
execution, rather than being checked every time an operation was added
to the queue. This lessens the chance of the index being created, then
deleted (by some external force), and then recreated via a bulk indexing
request.
Resolves#50353
Co-authored-by: Daniel Huang <danielhuang@tencent.com>
This is a spinoff of #48130 that generalizes the proposal to allow early termination with the composite aggregation when leading sources match a prefix or the entire index sort specification.
In such case the composite aggregation can use the index sort natural order to early terminate the collection when it reaches a composite key that is greater than the bottom of the queue.
The optimization is also applicable when a query other than match_all is provided. However the optimization is deactivated for sources that match the index sort in the following cases:
* Multi-valued source, in such case early termination is not possible.
* missing_bucket is set to true
Avoid backwards incompatible changes for 8.x and 7.6 by removing type
restriction on compile and Factory. Factories may optionally implement
ScriptFactory. If so, then they can indicate determinism and thus
cacheability.
**Backport**
Relates: #49466
Cache results from queries that use scripts if they use only
deterministic API calls. Nondeterministic API calls are marked in the
whitelist with the `@nondeterministic` annotation. Examples are
`Math.random()` and `new Date()`.
Refs: #49466
We need to read in a loop here. A single read to a huge byte array will
only read 16k max with the S3 SDK so if the blob we're trying to fully
read is larger we close early and fail the size comparison.
Also, drain streams fully when checking existence to avoid S3 SDK warnings.
With node ordinals gone, there's no longer a need for such a complicated full cluster restart
procedure (as we can now uniquely associate nodes to data folders).
Follow-up to #41652
Follow up to #49729
This change removes falling back to listing out the repository contents to find the latest `index-N` in write-mounted blob store repositories.
This saves 2-3 list operations on each snapshot create and delete operation. Also it makes all the snapshot status APIs cheaper (and faster) by saving one list operation there as well in many cases.
This removes the resiliency to concurrent modifications of the repository as a result and puts a repository in a `corrupted` state in case loading `RepositoryData` failed from the assumed generation.
* Remove BlobContainer Tests against Mocks
Removing all these weird mocks as asked for by #30424.
All these tests are now part of real repository ITs and otherwise left unchanged if they had
independent tests that didn't call the `createBlobStore` method previously.
The HDFS tests also get added coverage as a side-effect because they did not have an implementation
of the abstract repository ITs.
Closes#30424
Since 7.4, we switch from translog to Lucene as the source of history
for peer recoveries. However, we reduce the likelihood of
operation-based recoveries when performing a full cluster restart from
pre-7.4 because existing copies do not have PPRL.
To remedy this issue, we fallback using translog in peer recoveries if
the recovering replica does not have a peer recovery retention lease,
and the replication group hasn't fully migrated to PRRL.
Relates #45136
Today we do not use retention leases in peer recovery for closed indices
because we can't sync retention leases on closed indices. This change
allows that ability and adjusts peer recovery to use retention leases
for all indices with soft-deletes enabled.
Relates #45136
Co-authored-by: David Turner <david.turner@elastic.co>
See discussion in #50047 (comment).
There are reproducible issues with Thread#suspend in Jdk11 and Jdk12 for me locally
and we have one failure for each on CI.
Jdk8 and Jdk13 are stable though on CI and in my testing so I'd selectively disable
this test here to keep the coverage. We aren't using suspend in production code so the
JDK bug behind this does not affect us.
Closes#50047
* Remove Unused Single Delete in BlobStoreRepository
There are no more production uses of the non-bulk delete or the delete that throws
on missing so this commit removes both these methods.
Only the bulk delete logic remains. Where the bulk delete was derived from single deletes,
the single delete code was inlined into the bulk delete method.
Where single delete was used in tests it was replaced by bulk deleting.
Multiple version ranges are allowed to be used in section skip in yml
tests. This is useful when a bugfix was backported to latest versions
and all previous releases contain a wire breaking bug.
examples:
6.1.0 - 6.3.0, 6.6.0 - 6.7.9, 7.0 -
- 7.2, 8.0.0 -
backport #50014
Step on the road to #49060.
This commit adds the logic to keep track of a repository's generation
across repository operations. See changes to package level Javadoc for the concrete changes in the distributed state machine.
It updates the write side of new repository generations to be fully consistent via the cluster state. With this change, no `index-N` will be overwritten for the same repository ever. So eventual consistency issues around conflicting updates to the same `index-N` are not a possibility any longer.
With this change the read side will still use listing of repository contents instead of relying solely on the cluster state contents.
The logic for that will be introduced in #49060. This retains the ability to externally delete the contents of a repository and continue using it afterwards for the time being. In #49060 the use of listing to determine the repository generation will be removed in all cases (except for full-cluster restart) as the last step in this effort.
In order to cache script results in the query shard cache, we need to
check if scripts are deterministic. This change adds a default method
to the script factories, `isResultDeterministic() -> false` which is
used by the `QueryShardContext`.
Script results were never cached and that does not change here. Future
changes will implement this method based on whether the results of the
scripts are deterministic or not and therefore cacheable.
Refs: #49466
**Backport**
Historically only two things happened in the final reduction:
empty buckets were filled, and pipeline aggs were reduced (since it
was the final reduction, this was safe). Usage of the final reduction
is growing however. Auto-date-histo might need to perform
many reductions on final-reduce to merge down buckets, CCS
may need to side-step the final reduction if sending to a
different cluster, etc
Having pipelines generate their output in the final reduce was
convenient, but is becoming increasingly difficult to manage
as the rest of the agg framework advances.
This commit decouples pipeline aggs from the final reduction by
introducing a new "top level" reduce, which should be called
at the beginning of the reduce cycle (e.g. from the SearchPhaseController).
This will only reduce pipeline aggs on the final reduce after
the non-pipeline agg tree has been fully reduced.
By separating pipeline reduction into their own set of methods,
aggregations are free to use the final reduction for whatever
purpose without worrying about generating pipeline results
which are non-reducible
Adds `GET /_script_language` to support Kibana dynamic scripting
language selection.
Response contains whether `inline` and/or `stored` scripts are
enabled as determined by the `script.allowed_types` settings.
For each scripting language registered, such as `painless`,
`expression`, `mustache` or custom, available contexts for the language
are included as determined by the `script.allowed_contexts` setting.
Response format:
```
{
"types_allowed": [
"inline",
"stored"
],
"language_contexts": [
{
"language": "expression",
"contexts": [
"aggregation_selector",
"aggs"
...
]
},
{
"language": "painless",
"contexts": [
"aggregation_selector",
"aggs",
"aggs_combine",
...
]
}
...
]
}
```
Fixes: #49463
**Backport**
* Copying the request is not necessary here. We can simply release it once the response has been generated and a lot of `Unpooled` allocations that way
* Relates #32228
* I think the issue that preventet that PR that PR from being merged was solved by #39634 that moved the bulk index marker search to ByteBuf bulk access so the composite buffer shouldn't require many additional bounds checks (I'd argue the bounds checks we add, we save when copying the composite buffer)
* I couldn't neccessarily reproduce much of a speedup from this change, but I could reproduce a very measureable reduction in GC time with e.g. Rally's PMC (4g heap node and bulk requests of size 5k saw a reduction in young GC time by ~10% for me)
This commit fixes a number of issues with data replication:
- Local and global checkpoints are not updated after the new operations have been fsynced, but
might capture a state before the fsync. The reason why this probably went undetected for so
long is that AsyncIOProcessor is synchronous if you index one item at a time, and hence working
as intended unless you have a high enough level of concurrent indexing. As we rely in other
places on the assumption that we have an up-to-date local checkpoint in case of synchronous
translog durability, there's a risk for the local and global checkpoints not to be up-to-date after
replication completes, and that this won't be corrected by the periodic global checkpoint sync.
- AsyncIOProcessor also has another "bad" side effect here: if you index one bulk at a time, the
bulk is always first fsynced on the primary before being sent to the replica. Further, if one thread
is tasked by AsyncIOProcessor to drain the processing queue and fsync, other threads can
easily pile more bulk requests on top of that thread. Things are not very fair here, and the thread
might continue doing a lot more fsyncs before returning (as the other threads pile more and
more on top), which blocks it from returning as a replication request (e.g. if this thread is on the
primary, it blocks the replication requests to the replicas from going out, and delaying
checkpoint advancement).
This commit fixes all these issues, and also simplifies the code that coordinates all the after
write actions.
This rewrites long sort as a `DistanceFeatureQuery`, which can
efficiently skip non-competitive blocks and segments of documents.
Depending on the dataset, the speedups can be 2 - 10 times.
The optimization can be disabled with setting the system property
`es.search.rewrite_sort` to `false`.
Optimization is skipped when an index has 50% or more data with
the same value.
Optimization is done through:
1. Rewriting sort as `DistanceFeatureQuery` which can
efficiently skip non-competitive blocks and segments of documents.
2. Sorting segments according to the primary numeric sort field(#44021)
This allows to skip non-competitive segments.
3. Using collector manager.
When we optimize sort, we sort segments by their min/max value.
As a collector expects to have segments in order,
we can not use a single collector for sorted segments.
We use collectorManager, where for every segment a dedicated collector
will be created.
4. Using Lucene's shared TopFieldCollector manager
This collector manager is able to exchange minimum competitive
score between collectors, which allows us to efficiently skip
the whole segments that don't contain competitive scores.
5. When index is force merged to a single segment, #48533 interleaving
old and new segments allows for this optimization as well,
as blocks with non-competitive docs can be skipped.
Backport for #48804
Co-authored-by: Jim Ferenczi <jim.ferenczi@elastic.co>
* Make BlobStoreRepository Aware of ClusterState (#49639)
This is a preliminary to #49060.
It does not introduce any substantial behavior change to how the blob store repository
operates. What it does is to add all the infrastructure changes around passing the cluster service to the blob store, associated test changes and a best effort approach to tracking the latest repository generation on all nodes from cluster state updates. This brings a slight improvement to the consistency
by which non-master nodes (or master directly after a failover) will be able to determine the latest repository generation. It does not however do any tricky checks for the situation after a repository operation
(create, delete or cleanup) that could theoretically be used to get even greater accuracy to keep this change simple.
This change does not in any way alter the behavior of the blobstore repository other than adding a better "guess" for the value of the latest repo generation and is mainly intended to isolate the actual logical change to how the
repository operates in #49060
This commit adds a function in NodeClient that allows to track the progress
of a search request locally. Progress is tracked through a SearchProgressListener
that exposes query and fetch responses as well as partial and final reduces.
This new method can be used by modules/plugins inside a node in order to track the
progress of a local search request.
Relates #49091
This change adds a dynamic cluster setting named `indices.id_field_data.enabled`.
When set to `false` any attempt to load the fielddata for the `_id` field will fail
with an exception. The default value in this change is set to `false` in order to prevent
fielddata usage on this field for future versions but it will be set to `true` when backporting
to 7x. When the setting is set to true (manually or by default in 7x) the loading will also issue
a deprecation warning since we want to disallow fielddata entirely when https://github.com/elastic/elasticsearch/issues/26472
is implemented.
Closes#43599
All the implementations of `EsBlobStoreTestCase` use the exact same
bootstrap code that is also used by their implementation of
`EsBlobStoreContainerTestCase`.
This means all tests might as well live under `EsBlobStoreContainerTestCase`
saving a lot of code duplication. Also, there was no HDFS implementation for
`EsBlobStoreTestCase` which is now automatically resolved by moving the tests over
since there is a HDFS implementation for the container tests.
Same as #49518 pretty much but for GCS.
Fixing a few more spots where input stream can get closed
without being fully drained and adding assertions to make sure
it's always drained.
Moved the no-close stream wrapper to production code utilities since
there's a number of spots in production code where it's also useful
(will reuse it there in a follow-up).
We do not guarantee that EngineTestCase#getDocIds is called after the
engine has been externally refreshed. Hence, we trip an assertion
assertSearcherIsWarmedUp.
CI: https://gradle-enterprise.elastic.co/s/pm2at5qmfm2iu
Relates #48605
This commit ensures that even for requests that are known to be empty body
we at least attempt to read one bytes from the request body input stream.
This is done to work around the behavior in `sun.net.httpserver.ServerImpl.Dispatcher#handleEvent`
that will close a TCP/HTTP connection that does not have the `eof` flag (see `sun.net.httpserver.LeftOverInputStream#isEOF`)
set on its input stream. As far as I can tell the only way to set this flag is to do a read when there's no more bytes buffered.
This fixes the numerous connection closing issues because the `ServerImpl` stops closing connections that it thinks
weren't fully drained.
Also, I removed a now redundant drain loop in the Azure handler as well as removed the connection closing in the error handler's
drain action (this shouldn't have an effect but makes things more predictable/easier to reason about IMO).
I would suggest merging this and closing related issue after verifying that this fixes things on CI.
The way to locally reproduce the issues we're seeing in tests is to make the retry timings more aggressive in e.g. the azure tests
and move them to single digit values. This makes the retries happen quickly enough that they run into the async connecting closing
of allegedly non-eof connections by `ServerImpl` and produces the exact kinds of failures we're seeing currently.
Relates #49401, #49429
If some replica is performing a file-based recovery, then the check
assertNoSnapshottedIndexCommit would fail. We should increase the
timeout for this check so that we can wait until all recoveries done
or aborted.
Closes#49403
Fixing a few small issues found in this code:
1. We weren't reading the request headers but the response headers when checking for blob existence in the mocked single upload path
2. Error code can never be `null` removed the dead code that resulted
3. In the logging wrapper we weren't checking for `Throwable` so any failing assertions in the http mock would not show up since they
run on a thread managed by the mock http server
Strengthens the validateClusterFormed check that is used by the test infrastructure to make
sure that nodes are properly connected and know about each other. Is used in situations where
the cluster is scaled up and down, and where there previously was a network disruption that has
been healed.
Closes#49243
While we log exception in the handler, we may still miss exceptions
hgiher up the execution chain. This adds logging of exceptions to all
operations on the IO loop including connection establishment.
Relates #49401
This commit fixes the server side logic of "List Objects" operations
of Azure and S3 fixtures. Until today, the fixtures were returning a "
flat" view of stored objects and were not correctly handling the
delimiter parameter. This causes some objects listing to be wrongly
interpreted by the snapshot deletion logic in Elasticsearch which
relies on the ability to list child containers of BlobContainer (#42653)
to correctly delete stale indices.
As a consequence, the blobs were not correctly deleted from the
emulated storage service and stayed in heap until they got garbage
collected, causing CI failures like #48978.
This commit fixes the server side logic of Azure and S3 fixture when
listing objects so that it now return correct common blob prefixes as
expected by the snapshot deletion process. It also adds an after-test
check to ensure that tests leave the repository empty (besides the
root index files).
Closes#48978
This commit changes the ThreadContext to just use a regular ThreadLocal
over the lucene CloseableThreadLocal. The CloseableThreadLocal solves
issues with ThreadLocals that are no longer needed during runtime but
in the case of the ThreadContext, we need it for the runtime of the
node and it is typically not closed until the node closes, so we miss
out on the benefits that this class provides.
Additionally by removing the close logic, we simplify code in other
places that deal with exceptions and tracking to see if it happens when
the node is closing.
Closes#42577
This API call in most implementations is fairly IO heavy and slow
so it is more natural to be async in the first place.
Concretely though, this change is a prerequisite of #49060 since
determining the repository generation from the cluster state
introduces situations where this call would have to wait for other
operations to finish. Doing so in a blocking manner would break
`SnapshotResiliencyTests` and waste a thread.
Also, this sets up the possibility to in the future make use of async IO
where provided by the underlying Repository implementation.
In a follow-up `SnapshotsService#getRepositoryData` will be made async
as well (did not do it here, since it's another huge change to do so).
Note: This change for now does not alter the threading behaviour in any way (since `Repository#getRepositoryData` isn't forking) and is purely mechanical.
Make queries on the “_index” field fast-fail if the target shard is an index that doesn’t match the query expression. Part of the “canMatch” phase optimisations.
Closes#48473
ESIntegTestCase has logic to clean up static fields in a method
annotated with `@AfterClass` so that these fields do not trigger the
StaticFieldsInvariantRule. However, during the exceptional close of the
test cluster, this cleanup can be missed. The StaticFieldsInvariantRule
always runs and will attempt to inspect the size of the static fields
that were not cleaned up. If the `currentCluster` field of
ESIntegTestCase references an InternalTestCluster, this could hold a
reference to an implementation of a `Path` that comes from the
`sun.nio.fs` package, which the security manager will deny access to.
This casues additional noise to be generated since the
AccessControlException will cause the StaticFieldsInvariantRule to fail
and also be reported along with the actual exception that occurred.
This change clears the static fields of ESIntegTestCase in a finally
block inside the `@AfterClass` method to prevent this unnecessary noise.
Closes#41526
Backport of #48849. Update `.editorconfig` to make the Java settings the
default for all files, and then apply a 2-space indent to all `*.gradle`
files. Then reformat all the files.
When a node shuts down, `TransportService` moves to stopped state and
then closes connections. If a request is done in between, an exception
was thrown that was not retried in replication actions. Now throw a
wrapped `NodeClosedException` exception instead, which is correctly
handled in replication action. Fixed other usages too.
Relates #42612
Ensures that we always use the primary term established by the primary to index docs on the
replica. Makes the logic around replication less brittle by always using the operation primary
term on the replica that is coming from the primary.
This commit changes the ESMockAPIBasedRepositoryIntegTestCase so
that HttpHandler are now wrapped in order to log any exceptions that
could be thrown when executing the server side logic in repository
integration tests.
This commits sends the cluster name and discovery naode in the transport
level handshake response. This will allow us to stop sending the
transport service level handshake request in the 8.0-8.x release cycle.
It is necessary to start sending this in 7.x so that 8.0 is guaranteed
to be communicating with a version that sends the required information.
The realtime GET API currently has erratic performance in case where a document is accessed
that has just been indexed but not refreshed yet, as the implementation will currently force an
internal refresh in that case. Refreshing can be an expensive operation, and also will block the
thread that executes the GET operation, blocking other GETs to be processed. In case of
frequent access of recently indexed documents, this can lead to a refresh storm and terrible
GET performance.
While older versions of Elasticsearch (2.x and older) did not trigger refreshes and instead opted
to read from the translog in case of realtime GET API or update API, this was removed in 5.0
(#20102) to avoid inconsistencies between values that were returned from the translog and
those returned by the index. This was partially reverted in 6.3 (#29264) to allow _update and
upsert to read from the translog again as it was easier to guarantee consistency for these, and
also brought back more predictable performance characteristics of this API. Calls to the realtime
GET API, however, would still always do a refresh if necessary to return consistent results. This
means that users that were calling realtime GET APIs to coordinate updates on client side
(realtime GET + CAS for conditional index of updated doc) would still see very erratic
performance.
This PR (together with #48707) resolves the inconsistencies between reading from translog and
index. In particular it fixes the inconsistencies that happen when requesting stored fields, which
were not available when reading from translog. In case where stored fields are requested, this
PR will reparse the _source from the translog and derive the stored fields to be returned. With
this, it changes the realtime GET API to allow reading from the translog again, avoid refresh
storms and blocking the GET threadpool, and provide overall much better and predictable
performance for this API.
We should not open new engines if a shard is closed. We break this
assumption in #45263 where we stop verifying the shard state before
creating an engine but only before swapping the engine reference.
We can fail to snapshot the store metadata or checkIndex a closed shard
if there's some IndexWriter holding the index lock.
Closes#47060
CCR follower stats can return information for persistent tasks that are in the process of being cleaned up. This is problematic for tests where CCR follower indices have been deleted, but their persistent follower task is only cleaned up asynchronously afterwards. If one of the following tests then accesses the follower stats, it might still get the stats for that follower task.
In addition, some tests were not cleaning up their auto-follow patterns, leaving orphaned patterns behind. Other tests cleaned up their auto-follow patterns. As always the same name was used, it just depended on the test execution order whether this led to a failure or not. This commit fixes the offensive tests, and will also automatically remove auto-follow-patterns at the end of tests, like we do for many other features.
Closes #48700
In repository integration tests, we drain the HTTP request body before
returning a response. Before this change this operation was done using
Streams.readFully() which uses a 8kb buffer to read the input stream, it
now uses a 1kb for the same operation. This should reduce the allocations
made during the tests and speed them up a bit on CI.
Co-authored-by: Armin Braun <me@obrown.io>
Backport of #48452.
The SAML tests have large XML documents within which various parameters
are replaced. At present, if these test are auto-formatted, the XML
documents get strung out over many, many lines, and are basically
illegible.
Fix this by using named placeholders for variables, and indent the
multiline XML documents.
The tests in `SamlSpMetadataBuilderTests` deserve a special mention,
because they include a number of certificates in Base64. I extracted
these into variables, for additional legibility.
* Extract remote "sniffing" to connection strategy (#47253)
Currently the connection strategy used by the remote cluster service is
implemented as a multi-step sniffing process in the
RemoteClusterConnection. We intend to introduce a new connection strategy
that will operate in a different manner. This commit extracts the
sniffing logic to a dedicated strategy class. Additionally, it implements
dedicated tests for this class.
Additionally, in previous commits we moved away from a world where the
remote cluster connection was mutable. Instead, when setting updates are
made, the connection is torn down and rebuilt. We still had methods and
tests hanging around for the mutable behavior. This commit removes those.
* Introduce simple remote connection strategy (#47480)
This commit introduces a simple remote connection strategy which will
open remote connections to a configurable list of user supplied
addresses. These addresses can be remote Elasticsearch nodes or
intermediate proxies. We will perform normal clustername and version
validation, but otherwise rely on the remote cluster to route requests
to the appropriate remote node.
* Make remote setting updates support diff strategies (#47891)
Currently the entire remote cluster settings infrastructure is designed
around the sniff strategy. As we introduce an additional conneciton
strategy this infrastructure needs to be modified to support it. This
commit modifies the code so that the strategy implementations will tell
the service if the connection needs to be torn down and rebuilt.
As part of this commit, we will wait 10 seconds for new clusters to
connect when they are added through the "update" settings
infrastructure.
* Make remote setting updates support diff strategies (#47891)
Currently the entire remote cluster settings infrastructure is designed
around the sniff strategy. As we introduce an additional conneciton
strategy this infrastructure needs to be modified to support it. This
commit modifies the code so that the strategy implementations will tell
the service if the connection needs to be torn down and rebuilt.
As part of this commit, we will wait 10 seconds for new clusters to
connect when they are added through the "update" settings
infrastructure.
BytesReference is currently an abstract class which is extended by
various implementations. This makes it very difficult to use the
delegation pattern. The implication of this is that our releasable
BytesReference is a PagedBytesReference type and cannot be used as a
generic releasable bytes reference that delegates to any reference type.
This commit makes BytesReference an interface and introduces an
AbstractBytesReference for common functionality.
Brings handling of out of bounds points in linestrings in line with
points. Now points with latitude above 90 and below -90 are handled
the same way as for points by adjusting the longitude by moving it by
180 degrees.
Relates to #43916
This change adds a new field `"shards"` to `RepositoryData` that contains a mapping of `IndexId` to a `String[]`. This string array can be accessed by shard id to get the generation of a shard's shard folder (i.e. the `N` in the name of the currently valid `/indices/${indexId}/${shardId}/index-${N}` for the shard in question).
This allows for creating a new snapshot in the shard without doing any LIST operations on the shard's folder. In the case of AWS S3, this saves about 1/3 of the cost for updating an empty shard (see #45736) and removes one out of two remaining potential issues with eventually consistent blob stores (see #38941 ... now only the root `index-${N}` is determined by listing).
Also and equally if not more important, a number of possible failure modes on eventually consistent blob stores like AWS S3 are eliminated by moving all delete operations to the `master` node and moving from incremental naming of shard level index-N to uuid suffixes for these blobs.
This change moves the deleting of the previous shard level `index-${uuid}` blob to the master node instead of the data node allowing for a safe and consistent update of the shard's generation in the `RepositoryData` by first updating `RepositoryData` and then deleting the now unreferenced `index-${newUUID}` blob.
__No deletes are executed on the data nodes at all for any operation with this change.__
Note also: Previous issues with hanging data nodes interfering with master nodes are completely impossible, even on S3 (see next section for details).
This change changes the naming of the shard level `index-${N}` blobs to a uuid suffix `index-${UUID}`. The reason for this is the fact that writing a new shard-level `index-` generation blob is not atomic anymore in its effect. Not only does the blob have to be written to have an effect, it must also be referenced by the root level `index-N` (`RepositoryData`) to become an effective part of the snapshot repository.
This leads to a problem if we were to use incrementing names like we did before. If a blob `index-${N+1}` is written but due to the node/network/cluster/... crashes the root level `RepositoryData` has not been updated then a future operation will determine the shard's generation to be `N` and try to write a new `index-${N+1}` to the already existing path. Updates like that are problematic on S3 for consistency reasons, but also create numerous issues when thinking about stuck data nodes.
Previously stuck data nodes that were tasked to write `index-${N+1}` but got stuck and tried to do so after some other node had already written `index-${N+1}` were prevented form doing so (except for on S3) by us not allowing overwrites for that blob and thus no corruption could occur.
Were we to continue using incrementing names, we could not do this. The stuck node scenario would either allow for overwriting the `N+1` generation or force us to continue using a `LIST` operation to figure out the next `N` (which would make this change pointless).
With uuid naming and moving all deletes to `master` this becomes a non-issue. Data nodes write updated shard generation `index-${uuid}` and `master` makes those `index-${uuid}` part of the `RepositoryData` that it deems correct and cleans up all those `index-` that are unused.
Co-authored-by: Yannick Welsch <yannick@welsch.lu>
Co-authored-by: Tanguy Leroux <tlrx.dev@gmail.com>
The code here was needlessly complicated when it
enqueued all file uploads up-front. Instead, we can
go with a cleaner worker + queue pattern here by taking
the max-parallelism from the threadpool info.
Also, I slightly simplified the rethrow and
listener (step listener is pointless when you add the callback in the next line)
handling it since I noticed that we were needlessly rethrowing in the same
code and that wasn't worth a separate PR.
The test FW has a method to check that it's implementation of getting
index and wire compatible versions as well as reasoning about which
version is released or not produces the same rezults as the simillar
implementation in the build.
This PR adds the `verifyVersions` task to the test FW so we have one
task to check everything related to versions.
Especially in the snapshot code there's a lot
of logic chaining `ActionRunnables` in tricky
ways now and the code is getting hard to follow.
This change introduces two convinience methods that
make it clear that a wrapped listener is invoked with
certainty in some trickier spots and shortens the code a bit.
Armin Braun
Nhat Nguyen
David Turner
Dan Hermann
David Kyle
Tim Brooks
Ryan Ernst
Lee Hinman
Alan Woodward
Yannick Welsch
Julie Tibshirani
Rene Groeschke
Przemyslaw Gomulka
Nik Everett
Jason Tedor
Ryan Ernst
David Roberts
Martijn van Groningen
Stuart Tettemer
Rory Hunter
Tal Levy
Ignacio Vera
Mayya Sharipova
Howard
Igor Motov
Mark Tozzi
Andrei Dan
Zachary Tong
Benjamin Trent
Francisco Fernández Castaño
Henning Andersen
Rene Groeschke
Tanguy Leroux
Christos Soulios
William Brafford
Costin Leau
Christoph Büscher
Andy Bristol
Ioannis Kakavas
Marios Trivyzas
Tim Vernum
Alan Woodward
Jim Ferenczi
Gordon Brown
Jay Modi
Adrien Grand
bellengao
Przemysław Witek
Martijn Laarman
Maria Ralli
James Rodewig
Jake Landis
William Brafford
markharwood
Ignacio Vera
Alpar Torok