* [ILM] Add date setting to calculate index age
Add the `index.lifecycle.origination_date` to allow users to configure a
custom date that'll be used to calculate the index age for the phase
transmissions (as opposed to the default index creation date).
This could be useful for users to create an index with an "older"
origination date when indexing old data.
Relates to #42449.
* [ILM] Don't override creation date on policy init
The initial approach we took was to override the lifecycle creation date
if the `index.lifecycle.origination_date` setting was set. This had the
disadvantage of the user not being able to update the `origination_date`
anymore once set.
This commit changes the way we makes use of the
`index.lifecycle.origination_date` setting by checking its value when
we calculate the index age (ie. at "read time") and, in case it's not
set, default to the index creation date.
* Make origination date setting index scope dynamic
* Document orignation date setting in ilm settings
(cherry picked from commit d5bd2bb77ee28c1978ab6679f941d7c02e389d32)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
This commit introduces PKI realm delegation. This feature
supports the PKI authentication feature in Kibana.
In essence, this creates a new API endpoint which Kibana must
call to authenticate clients that use certificates in their TLS
connection to Kibana. The API call passes to Elasticsearch the client's
certificate chain. The response contains an access token to be further
used to authenticate as the client. The client's certificates are validated
by the PKI realms that have been explicitly configured to permit
certificates from the proxy (Kibana). The user calling the delegation
API must have the delegate_pki privilege.
Closes#34396
This change adds a new SSL context
xpack.notification.email.ssl.*
that supports the standard SSL configuration settings (truststore,
verification_mode, etc). This SSL context is used when configuring
outbound SMTP properties for watcher email notifications.
Backport of: #45272
This adds a new dynamic cluster setting `xpack.data_frame.num_transform_failure_retries`.
This setting indicates how many times non-critical failures should be retried before a data frame transform is marked as failed and should stop executing. At the time of this commit; Min: 0, Max: 100, Default: 10
Two new settings were introduced in #43669 to control the
behaviour of the Document Level Security BitSet cache.
This change adds documentation for these 2 settings.
Backport of: #44100
This change introduces a new setting,
xpack.ml.process_connect_timeout, to enable
the timeout for one of the external ML processes
to connect to the ES JVM to be increased.
The timeout may need to be increased if many
processes are being started simultaneously on
the same machine. This is unlikely in clusters
with many ML nodes, as we balance the processes
across the ML nodes, but can happen in clusters
with a single ML node and a high value for
xpack.ml.node_concurrent_job_allocations.
Several `ifdef::asciidoctor` conditionals were added so that AsciiDoc
and Asciidoctor doc builds rendered consistently.
With https://github.com/elastic/docs/pull/827, Elasticsearch Reference
documentation migrated completely to Asciidoctor. We no longer need to
support AsciiDoc so we can remove these conditionals.
Resolves#41722
This commit updates the default ciphers and TLS protocols that are used
when the runtime JDK supports them. New cipher support has been
introduced in JDK 11 and 12 along with performance fixes for AES GCM.
The ciphers are ordered with PFS ciphers being most preferred, then
AEAD ciphers, and finally those with mainstream hardware support. When
available stronger encryption is preferred for a given cipher.
This is a backport of #41385 and #41808. There are known JDK bugs with
TLSv1.3 that have been fixed in various versions. These are:
1. The JDK's bundled HttpsServer will endless loop under JDK11 and JDK
12.0 (Fixed in 12.0.1) based on the way the Apache HttpClient performs
a close (half close).
2. In all versions of JDK 11 and 12, the HttpsServer will endless loop
when certificates are not trusted or another handshake error occurs. An
email has been sent to the openjdk security-dev list and #38646 is open
to track this.
3. In JDK 11.0.2 and prior there is a race condition with session
resumption that leads to handshake errors when multiple concurrent
handshakes are going on between the same client and server. This bug
does not appear when client authentication is in use. This is
JDK-8213202, which was fixed in 11.0.3 and 12.0.
4. In JDK 11.0.2 and prior there is a bug where resumed TLS sessions do
not retain peer certificate information. This is JDK-8212885.
The way these issues are addressed is that the current java version is
checked and used to determine the supported protocols for tests that
provoke these issues.
The settings listed under the "Default values for TLS/SSL settings"
heading are not actual settings, rather they are common suffixes that
are used for settings that exist in a variety of contexts.
This commit changes the way they are presented to reduce this
confusion.
Backport of: #41779
* [DOCS] Added settings page for ILM.
* [DOCS] Adding ILM settings file
* [DOCS] Moved the ILM settings to a separate section
* [DOCS] Linked to the rollover docs.
* [DOCS] Tweaked the "required" wording.
This change does the following:
1. Makes the per-node setting xpack.ml.max_open_jobs
into a cluster-wide dynamic setting
2. Changes the job node selection to continue to use the
per-node attributes storing the maximum number of open
jobs if any node in the cluster is older than 7.1, and
use the dynamic cluster-wide setting if all nodes are on
7.1 or later
3. Changes the docs to reflect this
4. Changes the thread pools for native process communication
from fixed size to scaling, to support the dynamic nature
of xpack.ml.max_open_jobs
5. Renames the autodetect thread pool to the job comms
thread pool to make clear that it will be used for other
types of ML jobs (data frame analytics in particular)
Backport of #39320
This is related to #35975. It adds documentation on the remote recovery
process. Additionally, it adds documentation about the various settings
that can impact the process.
* Remove Hipchat support from Watcher (#39199)
Hipchat has been shut down and has previously been deprecated in
Watcher (#39160), therefore we should remove support for these actions.
* Add migrate note
This commit enables the use of TLSv1.3 with security by enabling us to
properly map `TLSv1.3` in the supported protocols setting to the
algorithm for a SSLContext. Additionally, we also enable TLSv1.3 by
default on JDKs that support it.
An issue was uncovered with the MockWebServer when TLSv1.3 is used that
ultimately winds up in an endless loop when the client does not trust
the server's certificate. Due to this, SSLConfigurationReloaderTests
has been pinned to TLSv1.2.
Closes#32276
The default value for ssl.supported_protocols no longer includes TLSv1
as this is an old protocol with known security issues.
Administrators can enable TLSv1.0 support by configuring the
appropriate `ssl.supported_protocols` setting, for example:
xpack.security.http.ssl.supported_protocols: ["TLSv1.2","TLSv1.1","TLSv1"]
Relates: #36021
This deprecates the `xpack.watcher.history.cleaner_service.enabled` setting,
since all newly created `.watch-history` indices in 7.0 will use ILM to manage
their retention.
In 8.0 the setting itself and cleanup actions will be removed.
Resolves#32041
This commit removes the Index Audit Output type, following its deprecation
in 6.7 by 8765a31d4e6770. It also adds the migration notice (settings notice).
In general, the problem with the index audit output is that event indexing
can be slower than the rate with which audit events are generated,
especially during the daily rollovers or the rolling cluster upgrades.
In this situation audit events will be lost which is a terrible failure situation
for an audit system.
Besides of the settings under the `xpack.security.audit.index` namespace, the
`xpack.security.audit.outputs` setting has also been deprecated and will be
removed in 7. Although explicitly configuring the logfile output does not touch
any deprecation bits, this setting is made redundant in 7 so this PR deprecates
it as well.
Relates #29881
Removes all sensitive settings (passwords, auth tokens, urls, etc...) for
watcher notifications accounts. These settings were deprecated (and
herein removed) in favor of their secure sibling that is set inside the
elasticsearch keystore. For example:
`xpack.notification.email.account.<id>.smtp.password`
is no longer a valid setting, and it is replaced by
`xpack.notification.email.account.<id>.smtp.secure_password`
This commit removes the fallback for SSL settings. While this may be
seen as a non user friendly change, the intention behind this change
is to simplify the reasoning needed to understand what is actually
being used for a given SSL configuration. Each configuration now needs
to be explicitly specified as there is no global configuration or
fallback to some other configuration.
Closes#29797
This adds a configurable whitelist to the HTTP client in watcher. By
default every URL is allowed to retain BWC. A dynamically configurable
setting named "xpack.http.whitelist" was added that allows to
configure an array of URLs, which can also contain simple regexes.
Closes#29937
`+` for index name inclusions is no longer supported for 6.x+. This
commit removes references of the `+` from the documenation. System
indices additional example is also included.
fixes#37237
This is related to #36652. In 7.0 we plan to deprecate a number of
settings that make reference to the concept of a tcp transport. We
mostly just have a single transport type now (based on tcp). Settings
should only reference tcp if they are referring to socket options. This
commit updates the settings in the docs. And removes string usages of
the old settings. Additionally it adds a missing remote compress setting
to the docs.
This commit adds documentation for authorization_realms
setting for the Kerberos realm and also corrects a typo in
existing documentation.
Co-authored-by: @A-Hall
This moves all Realm settings to an Affix definition.
However, because different realm types define different settings
(potentially conflicting settings) this requires that the realm type
become part of the setting key.
Thus, we now need to define realm settings as:
xpack.security.authc.realms:
file.file1:
order: 0
native.native1:
order: 1
- This is a breaking change to realm config
- This is also a breaking change to custom security realms (SecurityExtension)
Documents the new structured logfile format for auditing
that was introduced by #31931. Most changes herein
are for 6.x . In 7.0 the deprecated format is gone and a
follow-up PR is in order.
* Adding new xpack.ml.max_lazy_ml_nodes setting to docs
* Fixing docs, making it clearer what the setting does
* Adding note about external process need
The "lookupUser" method on a realm facilitates the "run-as" and
"authorization_realms" features.
This commit allows a realm to be used for "lookup only", in which
case the "authenticate" method (and associated token methods) are
disabled.
It does this through the introduction of a new
"authentication.enabled" setting, which defaults to true.
Building automatons can be costly. For the most part we cache things
that use automatons so the cost is limited.
However:
- We don't (currently) do that everywhere (e.g. we don't cache role
mappings)
- It is sometimes necessary to clear some of those caches which can
cause significant CPU overhead and processing delays.
This commit introduces a new cache in the Automatons class to avoid
unnecesarily recomputing automatons.
This enables Elasticsearch to use the JVM-wide configured
PKCS#11 token as a keystore or a truststore for its TLS configuration.
The JVM is assumed to be configured accordingly with the appropriate
Security Provider implementation that supports PKCS#11 tokens.
For the PKCS#11 token to be used as a keystore or a truststore for an
SSLConfiguration, the .keystore.type or .truststore.type must be
explicitly set to pkcs11 in the configuration.
The fact that the PKCS#11 token configuration is JVM wide implies that
there is only one available keystore and truststore that can be used by TLS
configurations in Elasticsearch.
The PIN for the PKCS#11 token can be set as a truststore parameter in
Elasticsearch or as a JVM parameter ( -Djavax.net.ssl.trustStorePassword).
The basic goal of enabling PKCS#11 token support is to allow PKCS#11-NSS in
FIPS mode to be used as a FIPS 140-2 enabled Security Provider.
* Implement xpack.monitoring.elasticsearch.collection.enabled setting
* Fixing line lengths
* Updating constructor calls in test
* Removing unused import
* Fixing line lengths in test classes
* Make monitoringService.isElasticsearchCollectionEnabled() return true for tests
* Remove wrong expectation
* Adding unit tests for new flag to be false
* Fixing line wrapping/indentation for better readability
* Adding docs
* Fixing logic in ClusterStatsCollector::shouldCollect
* Rebasing with master and resolving conflicts
* Simplifying implementation by gating scheduling
* Doc fixes / improvements
* Making methods package private
* Fixing wording
* Fixing method access
Authorization Realms allow an authenticating realm to delegate the task
of constructing a User object (with name, roles, etc) to one or more
other realms.
E.g. A client could authenticate using PKI, but then delegate to an LDAP
realm. The LDAP realm performs a "lookup" by principal, and then does
regular role-mapping from the discovered user.
This commit includes:
- authorization_realm support in the pki, ldap, saml & kerberos realms
- docs for authorization_realms
- checks that there are no "authorization chains"
(whereby "realm-a" delegates to "realm-b", but "realm-b" delegates to "realm-c")
Authorization realms is a platinum feature.
Add documentation for #31238
- Add documentation for the req_authn_context_class_ref setting
- Add a section in SAML Guide regarding the use of SAML
Authentication Context.
* Add relevant documentation for FIPS 140-2 compliance.
* Introduce `fips_mode` setting.
* Discuss necessary configuration for FIPS 140-2
* Discuss introduced limitations by FIPS 140-2
* [DOCS] Add configurable password hashing docs
Adds documentation about the newly introduced configuration option
for setting the password hashing algorithm to be used for the users
cache and for storing credentials for the native and file realm.
This commit adds documentation for configuring Kerberos realm.
Configuring Kerberos realm documentation highlights important
terminology and requirements before creating Kerberos realm.
Most of the documentation is centered around configuration from
Elasticsearch rather than go deep into Kerberos implementation.
Kerberos realm settings are mentioned in the security settings
for Kerberos realm.
With this commit we remove the documentation for the setting
`xpack.monitoring.collection.indices.stats.timeout` which has already
been removed in code.
Closes#32133
Relates #32229
Lisa Cawley
Andrei Dan
Thibault Richard
Aleh Zasypkin
Albert Zaharovits
Tim Vernum
James Rodewig
Ioannis Kakavas
Benjamin Trent
David Roberts
Jay Modi
Ioannis Kakavas
debadair
Daniel Mitterdorfer
Tim Brooks
Lee Hinman
Yogesh Gaikwad
Przemyslaw Gomulka
Albert Zaharovits
Alexander Reelsen
Jake Landis
Shaunak Kashyap
Or Bin
lipsill