* `foobar.txGet()` appears to return before `serviceB.stop()` returns, causing `ServiceB.close()` to run concurrently with the `stop` call and running into a race codition
* Closes#32863
We used to set `maxScore` to `0` within `TopDocs` in situations where there is really no score as the size was set to `0` and scores were not even tracked. In such scenarios, `Float.Nan` is more appropriate, which gets converted to `max_score: null` on the REST layer. That's also more consistent with lucene which set `maxScore` to `Float.Nan` when merging empty `TopDocs` (see `TopDocs#merge`).
This change allows an engine to recover from its local translog up to
the given seqno. The extended API can be used in these use cases:
When a replica starts following a new primary, it resets its index to
the safe commit, then replays its local translog up to the current
global checkpoint (see #32867).
When a replica starts a peer-recovery, it can initialize the
start_sequence_number to the persisted global checkpoint instead of the
local checkpoint of the safe commit. A replica will then replay its
local translog up to that global checkpoint before accepting remote
translog from the primary. This change will increase the chance of
operation-based recovery. I will make this in a follow-up.
Relates #32867
Today, CapturingTransport#createCapturingTransportService creates a transport
service with a connection manager with reasonable default behaviours, but
overriding this behaviour in a consumer is a litle tricky. Additionally, the
default behaviour for opening a connection duplicates the content of the
CapturingTransport#openConnection() method.
This change removes this duplication by delegating to openConnection() and
introduces overridable nodeConnected() and onSendRequest() methods so that
consumers can alter this behaviour more easily.
Relates #32246 in which we test the mechanisms for opening connections to
unknown (and possibly unreachable) nodes.
This change introduces a dedicated ConnectionManager for every RemoteClusterConnection
such that there is not state shared with the TransportService internal ConnectionManager.
All connections to a remote cluster are isolated from the TransportService but still uses
the TransportService and it's internal properties like the Transport, tracing and internal
listener actions on disconnects etc.
This allows a remote cluster connection to have a different lifecycle than a local cluster connection,
also local discovery code doesn't get notified if there is a disconnect on from a remote cluster and
each connection can use it's own dedicated connection profile which allows to have a reduced set of
connections per cluster without conflicting with the local cluster.
Closes#31835
This is related to #32517. This commit passes the DiscoveryNode to the
initiateChannel method for different Transport implementation. This
will allow additional attributes (besides just the socket address) to be
used when opening channels.
This is a followup to #31886. After that commit the
TransportConnectionListener had to be propogated to both the
Transport and the ConnectionManager. This commit moves that listener
to completely live in the ConnectionManager. The request and response
related methods are moved to a TransportMessageListener. That listener
continues to live in the Transport class.
This is related to #31835. It moves the default connection profile into
the ConnectionManager class. The will allow us to have different
connection managers with different profiles.
This removes custom Response classes that extend `AcknowledgedResponse` and do nothing, these classes are not needed and we can directly use the non-abstract super-class instead.
While this appears to be a large PR, no code has actually changed, only class names have been changed and entire classes removed.
This commit fixes existing uses of forbidden apis in the test framework
and re-enables the forbidden apis check. It was previously completely
disabled and had missed a rename of the forbidden apis signatures files.
closes#32772
This is related to #31835. This commit adds a connection manager that
manages client connections to other nodes. This means that the
TcpTransport no longer maintains a map of nodes that it is connected
to.
Our rest testing framework has support for sniffing the host metadata on
startup and, before this change, it'd sniff that metadata before running
the first test. This prevents running these tests against
elasticsearch installations that won't support sniffing like Elastic
Cloud. This change allows tests to only sniff for metadata when they
encounter a test with a `node_selector`. These selectors are the things
that need the metadata anyway and they are super rare. Tests that use
these won't be able to run against installations that don't support
sniffing but we can just skip them. In the case of Elastic Cloud, these
tests were never going to work against Elastic Cloud anyway.
Currently AbstractBuilderTestCase generates certain random values in its
`beforeTest()` method annotated with @Before only the first time that a test
method in the suite is run while initializing the serviceHolder that we use for
the rest of the test. This changes the values of subsequent random values
and has the effect that when running single methods from a test suite with
"-Dtests.method=*", the random values it sees are different from when the same
test method is run as part of the whole test suite. This makes it hard to use
the reproduction lines logged on failure.
This change runs the inialization of the serviceHolder and the randomization
connected to it using the test runners master seed, so reproduction by running
just one method is possible again.
Closes#32400
Processing bulk request goes item by item. Sometimes during processing, we need to stop execution and wait for a new mapping update to be processed by the node. This is currently achieved by throwing a `RetryOnPrimaryException`, which is caught higher up. When the exception is caught, we wait for the next cluster state to arrive and process the request again. Sadly this is a problem because all operations that were already done until the mapping change was required are applied again and get new sequence numbers. This in turn means that the previously issued sequence numbers are never replicated to the replicas. That causes the local checkpoint of those shards to be stuck and with it all the seq# based infrastructure.
This commit refactors how we deal with retries with the goal of removing `RetryOnPrimaryException` and `RetryOnReplicaException` (not done yet). It achieves so by introducing a class `BulkPrimaryExecutionContext` that is used the capture the execution state and allows continuing from where the execution stopped. The class also formalizes the steps each item has to go through:
1) A translation phase for updates
2) Execution phase (always index/delete)
3) Waiting for a mapping update to come in, if needed
4) Requires a retry (for updates and cases where the mapping are still not available after the put mapping call returns)
5) A finalization phase which allows updates to the index/delete result to an update result.
Enhance reproduction line with info about jdks
Provide the ability to control compiler and hava versions just by
passing a property. The actual java home comes from the
`JAVA<major>_HOME` env vars that we allready require.
This works better with the Gradle daemon as well.
Output is also changed a bit.
for `-Druntime.java=8 -Dcompiler.java=9`:
```
=======================================
Elasticsearch Build Hamster says Hello!
Gradle Version : 4.9
OS Info : Linux 4.17.8-1-ARCH (amd64)
Compiler JDK Version : 11 (Oracle Corporation 11-ea [OpenJDK 64-Bit Server VM 11-ea+22])
Runtime JDK Version : 11 (Oracle Corporation 11-ea [OpenJDK 64-Bit Server VM 11-ea+22])
Gradle JDK Version : 10 (Oracle Corporation 10.0.1 [OpenJDK 64-Bit Server VM 10.0.1+10])
Compiler java.home : /home/alpar/opt/jdk-11-ea22/
Runtime java.home : /home/alpar/opt/jdk-11-ea22/
Gradle java.home : /usr/lib/jvm/java-10-openjdk
Random Testing Seed : EA858533191E8DFB
=======================================
```
Without configuration:
```
=======================================
Elasticsearch Build Hamster says Hello!
=======================================
Gradle Version : 4.9
OS Info : Linux 4.17.8-1-ARCH (amd64)
JDK Version : 10 (Oracle Corporation 10.0.1 [OpenJDK 64-Bit Server VM 10.0.1+10])
JAVA_HOME : /usr/lib/jvm/java-10-openjdk
Random Testing Seed : 4BD5B2A839C8FCA1
=======================================
```
Here's how a reproduction line will look like (test made to fail):
```
./gradlew :modules:lang-painless:test -Dtests.seed=2DA2379065A4EEAB -Dtests.class=org.elasticsearch.painless.AdditionTests -Dtests.method="testInt" -Dtests.security.manager=true -Dtests.locale=es-PE -Dtests.timezone=WET -Dcompiler.java=10 -Druntime.java=10
```
It will be useful for future efforts to know if the global checkpoint
was updated. To this end, we need to expose whether or not the global
checkpoint was updated when the state of the replication tracker
updates. For this, we add to the tracker a callback that is invoked
whenever the global checkpoint is updated. For primaries this will be
invoked when the computed global checkpoint is updated based on state
changes to the tracker. For replicas this will be invoked when the local
knowledge of the global checkpoint is advanced from the primary.
The MockNioTransport (similar to the MockTcpTransport) is used for integ
tests. The MockTcpTransport has always only opened a single for all of
its work. The MockNioTransport has awlays opened the default number of
connections (13). This means that every test where two transports
connect requires 26 connections. This is more than is necessary. This
commit modifies the MockNioTransport to only require 3 connections.
We've recently seen a number of test failures that tripped an assertion in IndexShard (see issues
linked below), leading to the discovery of a race between resetting a replica when it learns about a
higher term and when the same replica is promoted to primary. This commit fixes the race by
distinguishing between a cluster state primary term (called pendingPrimaryTerm) and a shard-level
operation term. The former is set during the cluster state update or when a replica learns about a
new primary. The latter is only incremented under the operation block, which can happen in a
delayed fashion. It also solves the issue where a replica that's still adjusting to the new term
receives a cluster state update that promotes it to primary, which can happen in the situation of
multiple nodes being shut down in short succession. In that case, the cluster state update thread
would call `asyncBlockOperations` in `updateShardState`, which in turn would throw an exception
as blocking permits is not allowed while an ongoing block is in place, subsequently failing the shard.
This commit therefore extends the IndexShardOperationPermits to allow it to queue multiple blocks
(which will all take precedence over operations acquiring permits). Finally, it also moves the primary
activation of the replication tracker under the operation block, so that the actual transition to
primary only happens under the operation block.
Relates to #32431, #32304 and #32118
This change updates KerberosAuthenticationIT to resolve the host used
to connect to the test cluster. This is needed because the host could
be an IP address but SPNEGO requires a hostname to work properly. This
is done by adding a hook in ESRestTestCase for building the HttpHost
from the host and port.
Additionally, the project now specifies the IPv4 loopback address as
the http host. This is done because we need to be able to resolve the
address used for the HTTP transport before the node starts up, but the
http.ports file is not written until the node is started.
Closes#32498
First, some background: we have 15 different methods to get a logger in
Elasticsearch but they can be broken down into three broad categories
based on what information is provided when building the logger.
Just a class like:
```
private static final Logger logger = ESLoggerFactory.getLogger(ActionModule.class);
```
or:
```
protected final Logger logger = Loggers.getLogger(getClass());
```
The class and settings:
```
this.logger = Loggers.getLogger(getClass(), settings);
```
Or more information like:
```
Loggers.getLogger("index.store.deletes", settings, shardId)
```
The goal of the "class and settings" variant is to attach the node name
to the logger. Because we don't always have the settings available, we
often use the "just a class" variant and get loggers without node names
attached. There isn't any real consistency here. Some loggers get the
node name because it is convenient and some do not.
This change makes the node name available to all loggers all the time.
Almost. There are some caveats are testing that I'll get to. But in
*production* code the node name is node available to all loggers. This
means we can stop using the "class and settings" variants to fetch
loggers which was the real goal here, but a pleasant side effect is that
the ndoe name is now consitent on every log line and optional by editing
the logging pattern. This is all powered by setting the node name
statically on a logging formatter very early in initialization.
Now to tests: tests can't set the node name statically because
subclasses of `ESIntegTestCase` run many nodes in the same jvm, even in
the same class loader. Also, lots of tests don't run with a real node so
they don't *have* a node name at all. To support multiple nodes in the
same JVM tests suss out the node name from the thread name which works
surprisingly well and easy to test in a nice way. For those threads
that are not part of an `ESIntegTestCase` node we stick whatever useful
information we can get form the thread name in the place of the node
name. This allows us to keep the logger format consistent.
`GetResult` and `SearchHit` have been adjusted to parse back the `_ignored` meta field whenever it gets printed out. Expanded the existing tests to make sure this is covered. Fixed also a small problem around highlighted fields in `SearchHitTests`.
This commit changes the randomization to always create an index with a type.
It also adds a way to create a query shard context that maps to an index with
no type registered in order to explicitely test cases where there is no type.
Today we allow plugins to add index store implementations yet we are not
doing this in our new way of managing plugins as pull versus push. That
is, today we still allow plugins to push index store providers via an on
index module call where they can turn around and add an index
store. Aside from being inconsistent with how we manage plugins today
where we would look to pull such implementations from plugins at node
creation time, it also means that we do not know at a top-level (for
example, in the indices service) which index stores are available. This
commit addresses this by adding a dedicated plugin type for index store
plugins, removing the index module hook for adding index stores, and by
aggregating these into the top-level of the indices service.
This commit introduces "Application Privileges" to the X-Pack security
model.
Application Privileges are managed within Elasticsearch, and can be
tested with the _has_privileges API, but do not grant access to any
actions or resources within Elasticsearch. Their purpose is to allow
applications outside of Elasticsearch to represent and store their own
privileges model within Elasticsearch roles.
Access to manage application privileges is handled in a new way that
grants permission to specific application names only. This lays the
foundation for more OLS on cluster privileges, which is implemented by
allowing a cluster permission to inspect not just the action being
executed, but also the request to which the action is applied.
To support this, a "conditional cluster privilege" is introduced, which
is like the existing cluster privilege, except that it has a Predicate
over the request as well as over the action name.
Specifically, this adds
- GET/PUT/DELETE actions for defining application level privileges
- application privileges in role definitions
- application privileges in the has_privileges API
- changes to the cluster permission class to support checking of request
objects
- a new "global" element on role definition to provide cluster object
level security (only for manage application privileges)
- changes to `kibana_user`, `kibana_dashboard_only_user` and
`kibana_system` roles to use and manage application privileges
Closes#29820Closes#31559
This commit adds support for Kerberos authentication with a platinum
license. Kerberos authentication support relies on SPNEGO, which is
triggered by challenging clients with a 401 response with the
`WWW-Authenticate: Negotiate` header. A SPNEGO client will then provide
a Kerberos ticket in the `Authorization` header. The tickets are
validated using Java's built-in GSS support. The JVM uses a vm wide
configuration for Kerberos, so there can be only one Kerberos realm.
This is enforced by a bootstrap check that also enforces the existence
of the keytab file.
In many cases a fallback authentication mechanism is needed when SPNEGO
authentication is not available. In order to support this, the
DefaultAuthenticationFailureHandler now takes a list of failure response
headers. For example, one realm can provide a
`WWW-Authenticate: Negotiate` header as its default and another could
provide `WWW-Authenticate: Basic` to indicate to the client that basic
authentication can be used in place of SPNEGO.
In order to test Kerberos, unit tests are run against an in-memory KDC
that is backed by an in-memory ldap server. A QA project has also been
added to test against an actual KDC, which is provided by the krb5kdc
fixture.
Closes#30243
* Complete changes for running IT in a fips JVM
- Mute :x-pack:qa:sql:security:ssl:integTest as it
cannot run in FIPS 140 JVM until the SQL CLI supports key/cert.
- Set default JVM keystore/truststore password in top level build
script for all integTest tasks in a FIPS 140 JVM
- Changed top level x-pack build script to use keys and certificates
for trust/key material when spinning up clusters for IT
* Enabled advanced leak detection when loading `EsTestCase`
* Added custom `Appender` to collect leak logs and check for logged errors in a way similar to what is done for the `StatusLogger`
* Fixes#20398
* Add basic support for field aliases in index mappings. (#31287)
* Allow for aliases when fetching stored fields. (#31411)
* Add tests around accessing field aliases in scripts. (#31417)
* Add documentation around field aliases. (#31538)
* Add validation for field alias mappings. (#31518)
* Return both concrete fields and aliases in DocumentFieldMappers#getMapper. (#31671)
* Make sure that field-level security is enforced when using field aliases. (#31807)
* Add more comprehensive tests for field aliases in queries + aggregations. (#31565)
* Remove the deprecated method DocumentFieldMappers#getFieldMapper. (#32148)
When a replica is fully recovered (i.e., in `POST_RECOVERY` state) we send a request to the master
to start the shard. The master changes the state of the replica and publishes a cluster state to that
effect. In certain cases, that cluster state can be processed on the node hosting the replica
*together* with a cluster state that promotes that, now started, replica to a primary. This can
happen due to cluster state batched processing or if the master died after having committed the
cluster state that starts the shard but before publishing it to the node with the replica. If the master
also held the primary shard, the new master node will remove the primary (as it failed) and will also
immediately promote the replica (thinking it is started).
Sadly our code in IndexShard didn't allow for this which caused [assertions](13917162ad/server/src/main/java/org/elasticsearch/index/seqno/ReplicationTracker.java (L482)) to be tripped in some of our tests runs.
Sometimes we have a test failure that hits an `UnsupportedOperationException` in this infrastructure. When
debugging you want to know what caused this unexpected failure, but right now we're silent about it. This
commit adds some information to the `UnsupportedOperationException`
Relates to #32127
With the introduction of sequence number, we no longer use versionType to
resolve out of order collision in replication and recovery requests.
This PR removes removes the versionType from translog. We can only remove
it in 7.0 because it is still required in a mixed cluster between 6.x and 5.x.
Ensure our tests can run in a FIPS JVM
JKS keystores cannot be used in a FIPS JVM as attempting to use one
in order to init a KeyManagerFactory or a TrustManagerFactory is not
allowed.( JKS keystore algorithms for private key encryption are not
FIPS 140 approved)
This commit replaces JKS keystores in our tests with the
corresponding PEM encoded key and certificates both for key and trust
configurations.
Whenever it's not possible to refactor the test, i.e. when we are
testing that we can load a JKS keystore, etc. we attempt to
mute the test when we are running in FIPS 140 JVM. Testing for the
JVM is naive and is based on the name of the security provider as
we would control the testing infrastrtucture and so this would be
reliable enough.
Other cases of tests being muted are the ones that involve custom
TrustStoreManagers or KeyStoreManagers, null TLS Ciphers and the
SAMLAuthneticator class as we cannot sign XML documents in the
way we were doing. SAMLAuthenticator tests in a FIPS JVM can be
reenabled with precomputed and signed SAML messages at a later stage.
IT will be covered in a subsequent PR
With this commit we disable the real-memory circuit breaker in tests
that inherit from `ESSingleNodeTestCase`. As this breaker is based on
real memory usage over which we have no (full) control in tests and
their purpose is also not to test the circuit breaker, we use the
deterministic circuit breaker implementation that only accounts for
explicitly reserved memory.
Closes#32047
Relates #32071
* Replace Ingest ScriptContext with Custom Interface
* Make org.elasticsearch.ingest.common.ScriptProcessorTests#testScripting more precise
* Don't mock script factory in ScriptProcessorTests
* Adjust mock script plugin in IT for new API
* Adds a new auto-interval date histogram
This change adds a new type of histogram aggregation called `auto_date_histogram` where you can specify the target number of buckets you require and it will find an appropriate interval for the returned buckets. The aggregation works by first collecting documents in buckets at second interval, when it has created more than the target number of buckets it merges these buckets into minute interval bucket and continues collecting until it reaches the target number of buckets again. It will keep merging buckets when it exceeds the target until either collection is finished or the highest interval (currently years) is reached. A similar process happens at reduce time.
This aggregation intentionally does not support min_doc_count, offest and extended_bounds to keep the already complex logic from becoming more complex. The aggregation accepts sub-aggregations but will always operate in `breadth_first` mode deferring the computation of sub-aggregations until the final buckets from the shard are known. min_doc_count is effectively hard-coded to zero meaning that we will insert empty buckets where necessary.
Closes#9572
* Adds documentation
* Added sub aggregator test
* Fixes failing docs test
* Brings branch up to date with master changes
* trying to get tests to pass again
* Fixes multiBucketConsumer accounting
* Collects more buckets than needed on shards
This gives us more options at reduce time in terms of how we do the
final merge of the buckeets to produce the final result
* Revert "Collects more buckets than needed on shards"
This reverts commit 993c782d117892af9a3c86a51921cdee630a3ac5.
* Adds ability to merge within a rounding
* Fixes nonn-timezone doc test failure
* Fix time zone tests
* iterates on tests
* Adds test case and documentation changes
Added some notes in the documentation about the intervals that can bbe
returned.
Also added a test case that utilises the merging of conseecutive buckets
* Fixes performance bug
The bug meant that getAppropriate rounding look a huge amount of time
if the range of the data was large but also sparsely populated. In
these situations the rounding would be very low so iterating through
the rounding values from the min key to the max keey look a long time
(~120 seconds in one test).
The solution is to add a rough estimate first which chooses the
rounding based just on the long values of the min and max keeys alone
but selects the rounding one lower than the one it thinks is
appropriate so the accurate method can choose the final rounding taking
into account the fact that intervals are not always fixed length.
Thee commit also adds more tests
* Changes to only do complex reduction on final reduce
* merge latest with master
* correct tests and add a new test case for 10k buckets
* refactor to perform bucket number check in innerBuild
* correctly derive bucket setting, update tests to increase bucket threshold
* fix checkstyle
* address code review comments
* add documentation for default buckets
* fix typo
With this commit we introduce a new circuit-breaking strategy to the parent
circuit breaker. Contrary to the current implementation which only accounts for
memory reserved via child circuit breakers, the new strategy measures real heap
memory usage at the time of reservation. This allows us to be much more
aggressive with the circuit breaker limit so we bump it to 95% by default. The
new strategy is turned on by default and can be controlled with the new cluster
setting `indices.breaker.total.userealmemory`.
Note that we turn it off for all integration tests with an internal test cluster
because it leads to spurious test failures which are of no value (we cannot
fully control heap memory usage in tests). All REST tests, however, will make
use of the real memory circuit breaker.
Relates #31767
Currently AbstractXContentTestCase#testFromXContent appends random fields, but in
a fixed position. This PR shuffles all fields after the random fields have been appended,
hence the random fields are actually added to random positions.
In #29623 we added `Request` object flavored requests to the low level
REST client and in #30315 we deprecated the old `performRequest`s. This
changes all calls in the `test/framework` project to use the new
versions.
* Fix assertIngestDocument wrongfully passing
* Previously docA being subset of docB passed because iteration was over docA's keys only
* Scalars in nested fields were not compared in all cases
* Assertion errors were hard to interpret (message wasn't correct since it only mentioned the class type)
* In cases where two paths contained different types a ClassCastException was thrown instead of an AssertionError
* Fixes#28492
A newly added class called DateFormatters now contains java.time based
builders for dates, which also intends to be fully backwards compatible,
when the name based date formatters are picked. Also a new class named
CompoundDateTimeFormatter for being able to parse multiple different
formats has been added.
A duelling test class has been added that ensures the same dates when
parsing java or joda time formatted dates for the name based dates.
Note, that java.time and joda time are not fully backwards compatible,
which also means that old formats will currently not work with this
setup.
At the end of every `ESRestTestCase` we clean the cluster which includes
deleting all of the templates. If xpack is installed it'll automatically
recreate a few templates every time they are removed. Which is slow.
This change stops the cleanup from removing the xpack templates. It cuts
the time to run the docs tests more than in half and it probably saves a
bit more time on other tests as well.
Today TransportService is tightly coupled with Transport since it
requires an instance of TransportService in order to receive responses
and send requests. This is mainly due to the Request and Response handlers
being maintained in TransportService but also because of the lack of a proper
callback interface.
This change moves request handler registry and response handler registration into
Transport and adds all necessary methods to `TransportConnectionListener` in order
to remove the `TransportService` dependency from `Transport`
Transport now accepts one or more `TransportConnectionListener` instances that are
executed sequentially in a blocking fashion.
Adds a new parameter to the BlobContainer#write*Blob methods to specify whether the existing file
should be overridden or not. For some metadata files in the repository, we actually want to replace
the current file. This is currently implemented through an explicit blob delete and then a fresh write.
In case of using a cloud provider (S3, GCS, Azure), this results in 2 API requests instead of just 1.
This change will therefore allow us to achieve the same functionality using less API requests.
Some proxies require all requests to have paths starting with / since
there are no relative paths at the HTTP connection level. Elasticsearch
assumes paths are absolute. In order to run rest tests against a cluster
behind such a proxy, set the system property
tests.rest.client_path_prefix to /.
This commit removes some tests in the repository-s3 plugin that
have not been executed for 2+ years but have been maintained
for nothing. Most of the tests in AbstractAwsTestCase were
obsolete or superseded by fixture based integration tests.
The TaskManager and TaskAwareRequest could return null when registering
a task according to their javadocs, but no implementations ever actually
did that. This commit removes that wording from the javadocs and ensures
null is no longer allowed.
* Move to Gradle 4.8 RC1
* Use latest version of plugin
The current does not work with Gradle 4.8 RC1
* Switch to Gradle GA
* Add and configure build compare plugin
* add work-around for https://github.com/gradle/gradle/issues/5692
* work around https://github.com/gradle/gradle/issues/5696
* Make use of Gradle build compare with reference project
* Make the manifest more compare friendly
* Clear the manifest in compare friendly mode
* Remove animalsniffer from buildscript classpath
* Fix javadoc errors
* Fix doc issues
* reference Gradle issues in comments
* Conditionally configure build compare
* Fix some more doclint issues
* fix typo in build script
* Add sanity check to make sure the test task was replaced
Relates to #31324. It seems like Gradle has an inconsistent behavior and
the taks is not always replaced.
* Include number of non conforming tasks in the exception.
* No longer replace test task, create implicit instead
Closes#31324. The issue has full context in comments.
With this change the `test` task becomes nothing more than an alias for `utest`.
Some of the stand alone tests that had a `test` task now have `integTest`, and a
few of them that used to have `integTest` to run multiple tests now only
have `check`.
This will also help separarate unit/micro tests from integration tests.
* Revert "No longer replace test task, create implicit instead"
This reverts commit f1ebaf7d93e4a0a19e751109bf620477dc35023c.
* Fix replacement of the test task
Based on information from gradle/gradle#5730 replace the task taking
into account the task providres.
Closes#31324.
* Only apply build comapare plugin if needed
* Make sure test runs before integTest
* Fix doclint aftter merge
* PR review comments
* Switch to Gradle 4.8.1 and remove workaround
* PR review comments
* Consolidate task ordering
We added a way to close the yaml test client with #31575.
Such close method also needs to be called from the test suite though for
the additional clients to be closed.
We recently introduced a mechanism that allows to specify a node
selector as part of do sections (see #31471). When a node selector that
is not the default one is configured, a new client will be initialized
with the same properties as the default one, but with the specified
node selector. This commit improves such mechanism but also closing
the additional clients being created and adding equals/hashcode impl to
the custom node selector as they are cached into a map.
* remove left-over comment
* make sure of the property for plugins
* skip installing modules if these exist in the distribution
* Log the distrbution being ran
* Don't allow running with integ-tests-zip passed externally
* top level x-pack/qa can't run with oss distro
* Add support for matching objects in lists
Makes it possible to have a key that points to a list and assert that a
certain object is present in the list. All keys have to be present and
values have to match. The objects in the source list may have additional
fields.
example:
```
match: { 'nodes.$master.plugins': { name: ingest-attachment } }
```
* Update plugin and module tests to work with other distributions
Some of the tests expected that the integration tests will always be ran
with the `integ-test-zip` distribution so that there will be no other
plugins loaded.
With this change, we check for the presence of the plugin without
assuming exclusivity.
* Allow modules to run on other distros as well
To match the behavior of tets.distributions
* Add and use a new `contains` assertion
Replaces the previus changes that caused `match` to do a partial match.
* Implement PR review comments
This creates a YAML test "features" that indices if the cluster being
tested has xpack installed (`xpack`) or if it does *not* have xpack
installed (`no_xpack`). It uses those features to centralize skipping
a few tests that fail if xpack is installed.
The plan is to use this in a followup to skip docs tests that require
xpack when xpack is not installed. We *plan* to use the declaration
of required license level on the docs page to generate the required
`skip`.
Closes#30933.
Currently RandomObjects::addFields can potentially generate a large number of fields This commit decreases the chances that a new object or array is added as a new branch of an object, which lowers the probability of ending up with very big documents generated. It also reduces the number of documents generated for the SimulatePipelineResponseTests from 10 to 5 to reduce the testing time required for parsing.
* Migrate scripted metric aggregation scripts to ScriptContext design #29328
* Rename new script context container class and add clarifying comments to remaining references to params._agg(s)
* Misc cleanup: make mock metric agg script inner classes static
* Move _score to an accessor rather than an arg for scripted metric agg scripts
This causes the score to be evaluated only when it's used.
* Documentation changes for params._agg -> agg
* Migration doc addition for scripted metric aggs _agg object change
* Rename "agg" Scripted Metric Aggregation script context variable to "state"
* Rename a private base class from ...Agg to ...State that I missed in my last commit
* Clean up imports after merge
We have made node selectors configurable per request, but all
of other language clients don't allow for that.
A good reason not to do so, is that having a different node selector
per request breaks round-robin. This commit makes NodeSelector
configurable only at client initialization. It also improves the docs
on this matter, important given that a single node selector can still
affect round-robin.
TransportRequestHandler currently contains 2 messageReceived methods,
one which takes a Task, and one that does not. The first just delegates
to the second. This commit changes all existing implementors of
TransportRequestHandler to implement the version which takes Task, thus
allowing the class to be a functional interface, and eliminating the
need to throw exceptions when a task needs to be ensured.
Introduces support for multiple host providers, which allows the settings based hosts resolver to be
treated just as any other UnicastHostsProvider. Also introduces the notion of a HostsResolver so
that plugins such as FileBasedDiscovery do not need to create their own thread pool for resolving
hosts, making it easier to add new similar kind of plugins.
With #20695 we removed local transport and there is just TransportAddress now. The
UnicastHostsProvider currently returns DiscoveryNode instances, where, during pinging, we're
actually only making use of the TransportAddress to establish a first connection to the possible new
node. To simplify the interface, we can just return a list of transport addresses instead, which
means that it's not necessary anymore to create fake node objects in each plugin just to return the
address information.
Currently we set local addresses on the creation time of a NioChannel.
However, this may return null as the local address may not have been
set yet. An example is the local address has not been set on a client
channel as the connection process is not yet complete.
This PR modifies the getter to set the local field if it is currently null.
Historically in TcpTransport server channels were represented by the
same channel interface as socket channels. This was necessary as
TcpTransport was parameterized by the channel type. This commit
introduces TcpServerChannel and HttpServerChannel classes. Additionally,
it adds the implementations for the various transports. This allows
server channels to have unique functionality and not implement the
methods they do not support (such as send and getRemoteAddress).
Additionally, with the introduction of HttpServerChannel this commit
extracts some of the storing and closing channel work to the abstract
http server transport.
The QueryCachingPolicy#ALWAYS_CACHE was deprecated in Lucene-7.4 and
will be removed in Lucene-8.0. This change replaces it with QueryCachingPolicy.
This also makes INDEX_QUERY_CACHE_EVERYTHING_SETTING visible in testing only.
This is a general cleanup of channels and exception handling in http.
This commit introduces a CloseableChannel that is a superclass of
TcpChannel and HttpChannel. This allows us to unify the closing logic
between tcp and http transports. Additionally, the normal http channels
are extracted to the abstract server transport.
Finally, this commit (mostly) unifies the exception handling between nio
and netty4 http server transports.
Since #30966, Action no longer has anything but a call to the
GenericAction super constructor. This commit renames GenericAction
into Action, thus eliminating the Action class. Additionally, this
commit removes the Request generic parameter of the class, since
it was unused.
If we are running into a race condition between a node being configured
to be a remote node for cross cluster search etc. and that node joining
the cluster we might connect to that node with a remote profile. If that
node now joins the cluster it connected to it as a CCS remote node we use
the wrong profile and can't use bulk connections etc. anymore. This change
uses the remote profile only if we connect to a node that has a different cluster
name than the local cluster. This is not a perfect fix for this situation but
is the safe option while potentially only loose a small optimization of using
less connections per node which is small anyways since we only connect to a
small set of nodes.
Closes#29321
This commit adds the is-write-index flag for aliases.
It allows requests to set the flag, and responses to display the flag.
It does not validate and/or affect any indexing/getting/updating behavior
of Elasticsearch -- this will be done in a follow-up PR.
Add a `NodeSelector` so that users can filter the nodes that receive
requests based on node attributes.
I believe we'll need this to backport #30523 and we want it anyway.
I also added a bash script to help with rebuilding the sniffer parsing
test documents.
We might lose messages between getCapturedRequestsAndClear calls.
This commit makes sure that both getCapturedRequestsAndClear and
getCapturedRequestsByTargetNodeAndClear are atomic.
This is related to #28898. With the addition of the http nio transport,
we now have two different modules that provide http transports.
Currently most of the http logic lives at the module level. However,
some of this logic can live in server. In particular, some of the
setting of headers, cors, and pipelining. This commit begins this moving
in that direction by introducing lower level abstraction (HttpChannel,
HttpRequest, and HttpResonse) that is implemented by the modules. The
higher level rest request and rest channel work can live entirely in
server.
Many fixtures have similar code for writing the pid & ports files or
for handling HTTP requests. This commit adds an AbstractHttpFixture
class in the test framework that can be extended for specific testing purposes.
The `requires_replica` yaml test feature hasn't worked for years. This
is what happens if you try to use it:
```
> Throwable #1: java.lang.NullPointerException
> at __randomizedtesting.SeedInfo.seed([E6602FB306244B12:6E341069A8D826EA]:0)
> at org.elasticsearch.test.rest.yaml.Features.areAllSupported(Features.java:58)
> at org.elasticsearch.test.rest.yaml.section.SkipSection.skip(SkipSection.java:144)
> at org.elasticsearch.test.rest.yaml.ESClientYamlSuiteTestCase.test(ESClientYamlSuiteTestCase.java:321)
```
None of our tests use it.
TransportAction has many variants of execute. One of those variants
executes by returning a future, which is then often blocked on by
calling get(). This commit removes this variant of execute, instead
using a helper method for tests that want to block, or having tests
pass in a PlainActionFuture directly as a listener.
Co-authored-by: Simon Willnauer <simonw@apache.org>
Given the weirdness of the response returned by the get alias API, we went for a client specific response, which allows us to hold the error message, exception and status returned as part of the response together with aliases. See #30536 .
Relates to #27205
Allows users of the Low Level REST client to specify which hosts a
request should be run on. They implement the `NodeSelector` interface
or reuse a built in selector like `NOT_MASTER_ONLY` to chose which nodes
are valid. Using it looks like:
```
Request request = new Request("POST", "/foo/_search");
RequestOptions options = request.getOptions().toBuilder();
options.setNodeSelector(NodeSelector.NOT_MASTER_ONLY);
request.setOptions(options);
...
```
This introduces a new `Node` object which contains a `HttpHost` and the
metadata about the host. At this point that metadata is just `version`
and `roles` but I plan to add node attributes in a followup. The
canonical way to **get** this metadata is to use the `Sniffer` to pull
the information from the Elasticsearch cluster.
I've marked this as "breaking-java" because it breaks custom
implementations of `HostsSniffer` by renaming the interface to
`NodesSniffer` and by changing it from returning a `List<HttpHost>` to a
`List<Node>`. It *shouldn't* break anyone else though.
Because we expect to find it useful, this also implements `host_selector`
support to `do` statements in the yaml tests. Using it looks a little
like:
```
---
"example test":
- skip:
features: host_selector
- do:
host_selector:
version: " - 7.0.0" # same syntax as skip
apiname:
something: true
```
The `do` section parses the `version` string into a host selector that
uses the same version comparison logic as the `skip` section. When the
`do` section is executed it passed the off to the `RestClient`, using
the `ElasticsearchHostsSniffer` to sniff the required metadata.
The idea is to use this in mixed version tests to target a specific
version of Elasticsearch so we can be sure about the deprecation
logging though we don't currently have any examples that need it. We do,
however, have at least one open pull request that requires something
like this to properly test it.
Closes#21888
This removes the abstract `getTranslog` method in `Engine`, instead leaving it
to the abstract implementations of the other methods that use the translog. This
allows future Engines not to have a Translog, as instead they must implement the
methods that use the translog pieces to return necessary values.
The goal of this commit is to address unknown licenses when producing
the dependencies info report. We have two different checks that we run
on licenses. The first check is whether or not we have stashed a copy of
the license text for a dependency in the repository. The second is to
map every dependency to a license type (e.g., BSD 3-clause). The problem
here is that the way we were handling licenses in the second check
differs from how we handle licenses in the first check. The first check
works by finding a license file with the name of the artifact followed
by the text -LICENSE.txt. Yet in some cases we allow mapping an artifact
name to another name used to check for the license (e.g., we map
lucene-.* to lucene, and opensaml-.* to shibboleth. The second check
understood the first way of looking for a license file but not the
second way. So in this commit we teach the second check about the
mappings from artifact names to license names. We do this by copying the
configuration from the dependencyLicenses task to the dependenciesInfo
task and then reusing the code from the first check in the second
check. There were some other challenges here though. For example,
dependenciesInfo was checking too many dependencies. For now, we should
only be checking direct dependencies and leaving transitive dependencies
from another org.elasticsearch artifact to that artifact (we want to do
this differently in a follow-up). We also want to disable
dependenciesInfo for projects that we do not publish, users only care
about licenses they might be exposed to if they use our assembled
products. With all of the changes in this commit we have eliminated all
unknown licenses. A follow-up will enforce that when we add a new
dependency it does not get mapped to unknown, these will be forbidden in
the future. Therefore, with this change and earlier changes are left
having no unknown licenses and two custom licenses; custom here means it
does not map to an SPDX license type. Those two licenses are xz and
ldapsdk. A future change will not allow additional custom licenses
unless they are explicitly whitelisted. This ensures that if a new
dependency is added it is mapped to an SPDX license or mapped to custom
because it does not have an SPDX license.
* Fully encapsulate LocalCheckpointTracker inside of the engine
This makes the Engine interface not expose the `LocalCheckpointTracker`, instead
exposing the pieces needed (like retrieving the local checkpoint) as individual
methods.
* Remove DocumentFieldMappers#simpleMatchToFullName, as it is duplicative of MapperService#simpleMatchToIndexNames.
* Rename MapperService#simpleMatchToIndexNames -> simpleMatchToFullName for consistency.
* Simplify EsIntegTestCase#assertConcreteMappingsOnAll to accept concrete fields instead of wildcard patterns.
This is related to #27260. This commit combines the AcceptingSelector
and SocketSelector classes into a single NioSelector. This change
allows the same selector to handle both server and socket channels. This
is valuable as we do not necessarily want a dedicated thread running for
accepting channels.
With this change, this commit removes the configuration for dedicated
accepting selectors for the normal transport class. The accepting
workload for new node connections is likely low, meaning that there is
no need to dedicate a thread to this process.
This commit adds a new writeBlobAtomic() method to the BlobContainer
interface that can be implemented by repository implementations which
support atomic writes operations.
When the BlobContainer implementation does not provide a specific
implementation of writeBlobAtomic(), then the writeBlob() method is used.
Related to #30680
ObjectParser should throw XContentParseExceptions, not IAE. A dedicated parsing
exception can includes the place where the error occurred.
Closes#30605
With #31020 we introduced the ability for transport clients to indicate what features they support
in order to make sure we don't serialize object to them they don't support. This PR adapts the
serialization logic of persistent tasks to be aware of those features and not serialize tasks that
aren't supported.
Also, a version check is added for the future where we may add new tasks implementations and
need to be able to indicate they shouldn't be serialized both to nodes and clients.
As the implementation relies on the interface of `PersistentTaskParams`, these are no longer
optional. That's acceptable as all current implementation have them and we plan to make
`PersistentTaskParams` more central in the future.
Relates to #30731
This commit introduces the ability for a client to communicate to the
server features that it can support and for these features to be used in
influencing the decisions that the server makes when communicating with
the client. To this end we carry the features from the client to the
underlying stream as we carry the version of the client today. This
enables us to enhance the logic where we make protocol decisions on the
basis of the version on the stream to also make protocol decisions on
the basis of the features on the stream. With such functionality, the
client can communicate to the server if it is a transport client, or if
it has, for example, X-Pack installed. This enables us to support
rolling upgrades from the OSS distribution to the default distribution
without breaking client connectivity as we can now elect to serialize
customs in the cluster state depending on whether or not the client
reports to us using the feature capabilities that it can under these
customs. This means that we would avoid sending a client pieces of the
cluster state that it can not understand. However, we want to take care
and always send the full cluster state during node-to-node communication
as otherwise we would end up with different understanding of what is in
the cluster state across nodes depending on which features they reported
to have. This is why when deciding whether or not to write out a custom
we always send the custom if the client is not a transport client and
otherwise do not send the custom if the client is transport client that
does not report to have the feature required by the custom.
Co-authored-by: Yannick Welsch <yannick@welsch.lu>
This change adds an option named `split_queries_on_whitespace` to the `keyword`
field type. When set to true full text queries (`match`, `multi_match`, `query_string`, ...) that target the field will split the input on whitespace to build the query terms. Defaults to `false`.
Closes#30393
This modifies the high level rest client to allow calling code to
customize per request options for the bulk API. You do the actual
customization by passing a `RequestOptions` object to the API call
which is set on the `Request` that is generated by the high level
client. It also makes the `RequestOptions` a thing in the low level
rest client. For now that just means you use it to customize the
headers and the `httpAsyncResponseConsumerFactory` and we'll add
node selectors and per request timeouts in a follow up.
I only implemented this on the bulk API because it is the first one
in the list alphabetically and I wanted to keep the change small
enough to review. I'll convert the remaining APIs in a followup.
This commit removes the RequestBuilder generic type from Action. It was
needed to be used by the newRequest method, which in turn was used by
client.prepareExecute. Both of these methods are now removed, along with
the existing users of prepareExecute constructing the appropriate
builder directly.
Include size of snapshot in snapshot metadata
Adds difference of number of files (and file sizes) between prev and current snapshot. Total number/size reflects total number/size of files in snapshot.
Closes#18543
Currently nio and netty modules use the CompletableFuture class for
managing listeners. This is unfortunate as that class accepts
Throwable. This commit adds a class CompletableContext that wraps
the CompletableFuture but does not accept Throwable. This allows the
modification of netty and nio logic to no longer handle Throwable.
Today, the `ClusterApplier` and `MasterService` both use the
`ClusterStateTaskListener` interface to notify their callers when asynchronous
activities have completed. However, this is not wholly appropriate: none of the
callers into the `ClusterApplier` care about the `ClusterState` arguments that
they receive. This change introduces a dedicated ClusterApplyListener
interface for callers into the `ClusterApplier`, to distinguish these listeners
from the real `ClusterStateTaskListener`s that are waiting for responses from
the `MasterService`.
This commit reintroduces 31251c9 and 63a5799. These commits introduced a
memory leak and were reverted. This commit brings those commits back
and fixes the memory leak by removing unnecessary retain method calls.
This reverts commit 31251c9 introduced in #30695.
We suspect this commit is causing the OOME's reported in #30811 and we will use this PR to test this assertion.
When doing a node restart using the test framework, the restarted node does not only use the
settings provided to the original node, but also additional settings provided by plugin extensions,
which does not correspond to the settings that a node would have on a true restart.
This is related to #29500. We are removing the ability to disable http
pipelining. This PR removes the references to disabling pipelining in
the integration test case.
Adding headers rather than setting them all at once seems more
user-friendly and we already do it in a similar way for parameters
(see Request#addParameter).
The new snapshot includes LUCENE-8324 which fixes missing checkpoint
after a fully deletes segment is dropped on flush. This snapshot should
resolves failed tests in the CorruptedFileIT suite.
Closes#30741Closes#30577
This is related to #29500 and #28898. This commit removes the abilitiy
to disable http pipelining. After this commit, any elasticsearch node
will support pipelined requests from a client. Additionally, it extracts
some of the http pipelining work to the server module. This extracted
work is used to implement pipelining for the nio plugin.
This is related to #27260. The elasticsearch-nio jar is supposed to be
a library opposed to a framework. Currently it internally logs certain
exceptions. This commit modifies it to not rely on logging. Instead
exception handlers are passed by the applications that use the jar.
Meta plugins existed only for a short time, in order to enable breaking
up x-pack into multiple plugins. However, now that x-pack is no longer
installed as a plugin, the need for them has disappeared. This commit
removes the meta plugins infrastructure.
Date histograms on non-fixed timezones such as `Europe/Paris` proved much slower
than histograms on fixed timezones in #28727. This change mitigates the issue by
using a fixed time zone instead when shard data doesn't cross a transition so
that all timestamps share the same fixed offset. This should be a common case
with daily indices.
NOTE: Rewriting the aggregation doesn't work since the timezone is then also
used on the coordinating node to create empty buckets, which might be out of the
range of data that exists on the shard.
NOTE: In order to be able to get a shard context in the tests, I reused code
from the base query test case by creating a new parent test case for both
queries and aggregations: `AbstractBuilderTestCase`.
Mitigates #28727
This pipeline aggregation gives the user the ability to script functions that "move" across a window
of data, instead of single data points. It is the scripted version of MovingAvg pipeline agg.
Through custom script contexts, we expose a number of convenience methods:
- MovingFunctions.max()
- MovingFunctions.min()
- MovingFunctions.sum()
- MovingFunctions.unweightedAvg()
- MovingFunctions.linearWeightedAvg()
- MovingFunctions.ewma()
- MovingFunctions.holt()
- MovingFunctions.holtWinters()
- MovingFunctions.stdDev()
The user can also define any arbitrary logic via their own scripting, or combine with the above methods.
This change adds a `listTasks` method to the high level java
ClusterClient which allows listing running tasks through the
task management API.
Related to #27205
A 6.x node can send a deprecation message that the default number of
shards will change from five to one in 7.0.0. In a mixed cluster,
whether or not a create index request sees five or one shard and
produces a deprecation message depends on the version of the master
node. This means that during BWC tests a test can see this deprecation
message depending on the version of the master node. In 6.x when we
introduced this deprecation message we assumed that whereever we see
this deprecation message is expected. However, in a mixed cluster test
we need a similar mechanism but it would only apply if the version of
the master node is earlier than 7.0.0. This commit takes advantage of a
recent change to expose the version of the master node to do sections of
REST tests. With this in hand, we can skip asserting on the deprecation
message if the version of the master node is before 7.0.0 and otherwise
seeing that deprecation message would be completely unexpected.
This commit is related to #28898. It adds an nio driven http server
transport. Currently it only supports basic http features. Cors,
pipeling, and read timeouts will need to be added in future PRs.
This commit exposes the master version to the REST test context. This
will be needed in a follow-up where the master version will be used to
determine whether or not a certain warning header is expected.
This configures all `qa` projects to use the distribution contained in
the `tests.distribution` system property if it is set. The goal is to
create a simple way to run tests against the default distribution which
has x-pack basic features enabled while not forcing these tests on all
contributors. You run these tests by doing something like:
```
./gradlew -p qa -Dtests.distribution=zip check
```
or
```
./gradlew -p qa -Dtests.distribution=zip bwcTest
```
x-pack basic *shouldn't* get in the way of any of these tests but
nothing is ever perfect so this we have to disable a few when running
with the zip distribution.
This commit changes the default out-of-the-box configuration for the
number of shards from five to one. We think this will help address a
common problem of oversharding. For users with time-based indices that
need a different default, this can be managed with index templates. For
users with non-time-based indices that find they need to re-shard with
the split API in place they no longer need to resort only to
reindexing.
Since this has the impact of changing the default number of shards used
in REST tests, we want to ensure that we still have coverage for issues
that could arise from multiple shards. As such, we randomize (rarely)
the default number of shards in REST tests to two. This is managed via a
global index template. However, some tests check the templates that are
in the cluster state during the test. Since this template is randomly
there, we need a way for tests to skip adding the template used to set
the number of shards to two. For this we add the default_shards feature
skip. To avoid having to write our docs in a complicated way because
sometimes they might be behind one shard, and sometimes they might be
behind two shards we apply the default_shards feature skip to all docs
tests. That is, these tests will always run with the default number of
shards (one).
The following tokenizers were moved: classic, edge_ngram,
letter, lowercase, ngram, path_hierarchy, pattern, thai, uax_url_email and
whitespace.
Left keyword tokenizer factory in server module, because
normalizers directly depend on it.This should be addressed on a
follow up change.
Relates to #23658
There's no need for an extra `blobExists()` call when writing a blob to the HDFS service. The writeBlob implementation for the HDFS repository already uses the `CreateFlag.CREATE` option on the file creation, which ensures that the blob that's uploaded does not already exist. This saves one network roundtrip.
The TokenMetaData equals method compared byte arrays using `.equals` on
the arrays themselves, which is the equivalent of an `==` check. This
means that a seperate byte[] with the same contents would not be
considered equivalent to the existing one, even though it should be.
The method has been updated to use `Array#equals` and similarly the
hashcode method has been updated to call `Arrays#hashCode` instead of
calling hashcode on the array itself.
This commit removes a test that we can not restore from 1.x and 2.x
repository files. This test is not needed, the version of Elasticsearch
that this commit targets can not even read index files from those
versions.
We have a pile of documentation describing how to rebuild the built in
language analyzers and, previously, our documentation testing framework
made sure that the examples successfully built *an* analyzer but they
didn't assert that the analyzer built by the documentation matches the
built in anlayzer. Unsuprisingly, some of the examples aren't quite
right.
This adds a mechanism that tests that the analyzers built by the docs.
The mechanism is fairly simple and brutal but it seems to be working:
build a hundred random unicode sequences and send them through the
`_analyze` API with the rebuilt analyzer and then again through the
built in analyzer. Then make sure both APIs return the same results.
Each of these calls to `_anlayze` takes about 20ms on my laptop which
seems fine.
When deleting or creating a snapshot for a given shard, elasticsearch
usually starts by listing all the existing snapshotted files in the repository.
Then it computes a diff and deletes the snapshotted files that are not
needed anymore. During this deletion, an exception is thrown if the file
to be deleted does not exist anymore.
This behavior is challenging with cloud based repository implementations
like S3 where a file that has been deleted can still appear in the bucket for
few seconds/minutes (because the deletion can take some time to be fully
replicated on S3). If the deleted file appears in the listing of files, then the
following deletion will fail with a NoSuchFileException and the snapshot
will be partially created/deleted.
This pull request makes the deletion of these files a bit less strict, ie not
failing if the file we want to delete does not exist anymore. It introduces a
new BlobContainer.deleteIgnoringIfNotExists() method that can be used
at some specific places where not failing when deleting a file is
considered harmless.
Closes#28322
Upgrade to lucene-7.4.0-snapshot-1ed95c097b
This version contains:
* An Analyzer for Korean
* An IntervalQuery and IntervalsSource that retrieve minimum intervals of positional queries.
* A new API to retrieve matches (offsets and positions) of a query for a single document.
* Support for soft deletes in the index writer.
* A fixed shingle filter that handles index time synonyms.
* Support for emoji sequence in ICUTokenizer (with an upgrade to icu 61.1)
Fix NPE when CumulativeSum agg encounters null/empty bucket
If the cusum agg encounters a null value, it's because the value is
missing (like the first value from a derivative agg), the path is
not valid, or the bucket in the path was empty.
Previously cusum would just explode on the null, but this changes it
so we only increment the sum if the value is non-null and finite.
This is safe because even if the cusum encounters all null or empty
buckets, the cumulative sum is still zero (like how the sum agg returns
zero even if all the docs were missing values)
I went ahead and tweaked AggregatorTestCase to allow testing pipelines,
so that I could delete the IT test and reimplement it as AggTests.
Closes#27544
This commit removes the http.enabled setting. While all real nodes (started with bin/elasticsearch) will always have an http binding, there are many tests that rely on the quickness of not actually needing to bind to 2 ports. For this case, the MockHttpTransport.TestPlugin provides a dummy http transport implementation which is used by default in ESIntegTestCase.
closes#12792
This commit refactors VersionUtils.resolveReleasedVersions to be
simpler, and in the process fixes the behavior to match that of
VersionCollection.groovy.
closes#30133
Starting with the refactoring in https://github.com/elastic/elasticsearch/pull/22778 (released in 5.3) we may fail to properly replicate operation when a mapping update on master fails. If a bulk
operations needs a mapping update half way, it will send a request to the master before continuing
to index the operations. If that request times out or isn't acked (i.e., even one node in the cluster
didn't process it within 30s), we end up throwing the exception and aborting the entire bulk. This is
a problem because all operations that were processed so far are not replicated any more to the
replicas. Although these operations were never "acked" to the user (we threw an error) it cause the
local checkpoint on the replicas to lag (on 6.x) and the primary and replica to diverge.
This PR does a couple of things:
1) Most importantly, treat *any* mapping update failure as a document level failure, meaning only
the relevant indexing operation will fail.
2) Removes the mapping update callbacks from `IndexShard.applyIndexOperationOnPrimary` and
similar methods for simpler execution. We don't use exceptions any more when a mapping
update was successful.
I think we need to do more work here (the fact that a single slow node can prevent those mappings
updates from being acked and thus fail operations is bad), but I want to keep this as small as I can
(it is already too big).
`javadoc` will switch from detaulting to html4 to html5 in "a future
release". We should get ahead of it so we're not surprised. Also, HTML5
is the future! Er, the present. Anyway, this follows up from #30220 to
make the Javadoc for two of the four remaining projects HTML5
compatible.
The internal test cluster can sometimes have 0 nodes. In this situation,
the http.enabled flag will never be read, and thus no deprecation
warning will be emitted. This commit guards the deprecation warning
check in this case.
Today the translog of an engine is exposed and can be accessed directly.
While this exposure offers much flexibility, it also causes these troubles:
- Inconsistent behavior between translog method and engine method.
For example, rolling a translog generation via an engine also trims
unreferenced files, but translog's method does not.
- An engine does not get notified when critical errors happen in translog
as the access is direct.
This change isolates translog of an engine and enforces all accesses to
translog via the engine.
The index thread pool is no longer needed as its primary use-case for
single-document indexing requests has been relieved now that
single-document indexing requests are converted to bulk indexing
requests (with a single document payload).
This adds 2 testcases that test if a shard goes idle
pending (uncommitted) segments are committed and unreferenced
files will be freed.
Relates to #29482
This change adds the current primary term to the header of the current
translog file. Having a term in a translog header is a prerequisite step
that allows us to trim translog operations given the max valid seq# for
that term.
This commit also updates tests to conform the primary term invariant
which guarantees that all translog operations in a translog file have
its terms at most the term stored in the translog header.
* Add a helper method to get a random java.util.TimeZone
This adds a helper method to ESTestCase that returns a randomized
`java.util.TimeZone`. This can be used when transitioning code from Joda to the
JDK's time classes.
Some features have been deprecated since `6.0` like the `_parent` field or the
ability to have multiple types per index. This allows to remove quite some
code, which in-turn will hopefully make it easier to proceed with the removal
of types.
Currently rest-based tests do not work from the IDE, as the security
manager is configured to permit certain network operations when
using the snapshot jars compiled by gradle. We have an existing
workaround that explicitly associates a codebase with the path
from which the classes are loaded (in this case, the IDE build
directory). This PR adds the rest client to this workaround list.
* Move Streams.copy into elasticsearch-core and make a multi-release jar
This moves the method `Streams.copy(InputStream in, OutputStream out)` into the
`elasticsearch-core` project (inside the `o.e.core.internal.io` package). It
also makes this class into a multi-release class where the Java 9 equivalent
uses `InputStream#transferTo`.
This is a followup from
https://github.com/elastic/elasticsearch/pull/29300#discussion_r178147495
* Move ObjectParser into the x-content lib
This moves `ObjectParser`, `AbstractObjectParser`, and
`ConstructingObjectParser` into the libs/x-content dependency. This decoupling
allows them to be used for parsing for projects that don't want to depend on the
entire Elasticsearch jar.
Relates to #28504
* Fixes query_string query equals timezone check
This change fixes a bug where two `QueryStringQueryBuilder`s were found
to be equal if they had the same timezone set even if the query string
in the builders were different
Closes#29403
* Adds mutate function to QueryStringQueryBuilderTests
* iter
This improves the way similarities are plugged in in order to:
- reject the classic similarity on 7.x indices and emit a deprecation
warning otherwise
- reject unkwown parameters on 7.x indices and emit a deprecation
warning otherwise
Even though this breaks the plugin API, I'd like to backport to 7.x so
that users can get deprecation warnings when they are doing something
that will become unsupported in the future.
Closes#23208Closes#29035
* Begin moving XContent to a separate lib/artifact
This commit moves a large portion of the XContent code from the `server` project
to the `libs/xcontent` project. For the pieces that have been moved, some
helpers have been duplicated to allow them to be decoupled from ES helper
classes. In addition, `Booleans` and `CheckedFunction` have been moved to the
`elasticsearch-core` project.
This decoupling is a move so that we can eventually make things like the
high-level REST client not rely on the entire ES jar, only the parts it needs.
There are some pieces that are still not decoupled, in particular some of the
XContent tests still remain in the server project, this is because they test a
large portion of the pluggable xcontent pieces through
`XContentElasticsearchException`. They may be decoupled in future work.
Additionally, there may be more piecese that we want to move to the xcontent lib
in the future that are not part of this PR, this is a starting point.
Relates to #28504
Removes a set of assertions in the test framework that verified that
Streamable objects could be serialized and deserialized across different
versions. When this was discussed the consensus was that this approach
has not caught many bugs in a long time and that serialization testing of
objects was best left to their respective unit and integration tests.
This commit also removes a transport interceptor that was used in
ESIntegTestCase tests to make these assertions about objects coming in
or off the wire.
Today we have a few problems with how we handle bad requests:
- handling requests with bad encoding
- handling requests with invalid value for filter_path/pretty/human
- handling requests with a garbage Content-Type header
There are two problems:
- in every case, we give an empty response to the client
- in most cases, we leak the byte buffer backing the request!
These problems are caused by a broader problem: poor handling preparing
the request for handling, or the channel to write to when the response
is ready. This commit addresses these issues by taking a unified
approach to all of them that ensures that:
- we respond to the client with the exception that blew us up
- we do not leak the byte buffer backing the request
We historically removed reading from the transaction log to get consistent
results from _GET calls. There was also the motivation that the read-modify-update
principle we apply should not be hidden from the user. We still agree on the fact
that we should not hide these aspects but the impact on updates is quite significant
especially if the same documents is updated before it's written to disk and made serachable.
This change adds back the ability to read from the transaction log but only for update calls.
Calls to the _GET API will always do a refresh if necessary to return consistent results ie.
if stored fields or DocValues Fields are requested.
Closes#26802
Once a document is deleted and Lucene is refreshed, we will not be able
to look up the `version/seq#` associated with that delete in Lucene. As
conflicting operations can still be indexed, we need another mechanism
to remember these deletes. Therefore deletes should still be stored in
the Version Map, even after Lucene is refreshed. Obviously, we can't
remember all deletes forever so a trimming mechanism is needed.
Currently, we remember deletes for at least 1 minute (the default GC
deletes cycle) and clean them periodically. This is, at the moment, the
best we can do on the primary for user facing APIs but this arbitrary
time limit is problematic for replicas. Furthermore, we can't rely on
the primary and replicas doing the trimming in a synchronized manner,
and failing to do so results in the replica and primary making different
decisions.
The following scenario can cause inconsistency between
primary and replica.
1. Primary index doc (index, id=1, v2)
2. Network packet issue causes index operation to back off and wait
3. Primary deletes doc (delete, id=1, v3)
4. Replica processes delete (delete, id=1, v3)
5. 1+ minute passes (GC deletes runs replica)
6. Indexing op is finally sent to the replica which no processes it
because it forgot about the delete.
We can reply on sequence-numbers to prevent this issue. If we prune only
deletes whose seqno at most the local checkpoint, a replica will
correctly remember what it needs. The correctness is explained as
follows:
Suppose o1 and o2 are two operations on the same document with seq#(o1)
< seq#(o2), and o2 arrives before o1 on the replica. o2 is processed
normally since it arrives first; when o1 arrives it should be discarded:
1. If seq#(o1) <= LCP, then it will be not be added to Lucene, as it was
already previously added.
2. If seq#(o1) > LCP, then it depends on the nature of o2:
- If o2 is a delete then its seq# is recorded in the VersionMap,
since seq#(o2) > seq#(o1) > LCP, so a lookup can find it and
determine that o1 is stale.
- If o2 is an indexing then its seq# is either in Lucene (if
refreshed) or the VersionMap (if not refreshed yet), so a
real-time lookup can find it and determine that o1 is stale.
In this PR, we prefer to deploy a single trimming strategy, which
satisfies both requirements, on primary and replicas because:
- It's simpler - no need to distinguish if an engine is running at
primary mode or replica mode or being promoted.
- If a replica subsequently is promoted, user experience is fully
maintained as that replica remembers deletes for the last GC cycle.
However, the version map may consume less memory if we deploy two
different trimming strategies for primary and replicas.
#28245 has introduced the utility class`EngineDiskUtils` with a set of methods to prepare/change
translog and lucene commit points. That util class bundled everything that's needed to create and
empty shard, bootstrap a shard from a lucene index that was just restored etc.
In order to safely do these manipulations, the util methods acquired the IndexWriter's lock. That
would sometime fail due to concurrent shard store fetching or other short activities that require the
files not to be changed while they read from them.
Since there is no way to wait on the index writer lock, the `Store` class has other locks to make
sure that once we try to acquire the IW lock, it will succeed. To side step this waiting problem, this
PR folds `EngineDiskUtils` into `Store`. Sadly this comes with a price - the store class doesn't and
shouldn't know about the translog. As such the logic is slightly less tight and callers have to do the
translog manipulations on their own.
This change refactors the composite aggregation to add an execution mode that visits documents in the order of the values
present in the leading source of the composite definition. This mode does not need to visit all documents since it can early terminate
the collection when the leading source value is greater than the lowest value in the queue.
Instead of collecting the documents in the order of their doc_id, this mode uses the inverted lists (or the bkd tree for numerics) to collect documents
in the order of the values present in the leading source.
For instance the following aggregation:
```
"composite" : {
"sources" : [
{ "value1": { "terms" : { "field": "timestamp", "order": "asc" } } }
],
"size": 10
}
```
... can use the field `timestamp` to collect the documents with the 10 lowest values for the field instead of visiting all documents.
For composite aggregation with more than one source the execution can early terminate as soon as one of the 10 lowest values produces enough
composite buckets. For instance if visiting the first two lowest timestamp created 10 composite buckets we can early terminate the collection since it
is guaranteed that the third lowest timestamp cannot create a composite key that compares lower than the one already visited.
This mode can execute iff:
* The leading source in the composite definition uses an indexed field of type `date` (works also with `date_histogram` source), `integer`, `long` or `keyword`.
* The query is a match_all query or a range query over the field that is used as the leading source in the composite definition.
* The sort order of the leading source is the natural order (ascending since postings and numerics are sorted in ascending order only).
If these conditions are not met this aggregation visits each document like any other agg.
* Remove BytesArray and BytesReference usage from XContentFactory
This removes the usage of `BytesArray` and `BytesReference` from
`XContentFactory`. Instead, a regular `byte[]` should be passed. To assist with
this a helper has been added to `XContentHelper` that will preserve the offset
and length from the underlying BytesReference.
This is part of ongoing work to separate the XContent parts from ES so they can
be factored into their own jar.
Relates to #28504
`$_path` is used by documentation tests to ignore a value from a
response, for example:
```
[source,js]
----
{
"count": 1,
"datafeeds": [
{
"datafeed_id": "datafeed-total-requests",
"state": "started",
"node": {
...
"attributes": {
"ml.machine_memory": "17179869184",
"ml.max_open_jobs": "20",
"ml.enabled": "true"
}
},
"assignment_explanation": ""
}
]
}
----
// TESTRESPONSE[s/"17179869184"/$body.$_path/]
```
That example shows `17179869184` in the compiled docs but when it runs
the tests generated by that doc it ignores `17179869184` and asserts
instead that there is a value in that field. This is required because we
can't predict things like "how many milliseconds will this take?" and
"how much memory will this take?".
Before this change it was impossible to use `$_path` when any component
of the path contained a `.`. This fixes the `$_path` evaluator to
properly escape `.`.
Closes#28770
Changes made in #28972 seems to have changed some assumptions about how
SMILE and CBOR write byte[] values and how this is tested. This changes
the generation of the randomized DocumentField values back to BytesArray
while expecting the JSON and YAML deserialisation to produce Base64
encoded strings and SMILE and CBOR to parse back BytesArray instances.
Closes#29080
Currently we have a fairly complicated logic in the engine constructor logic to deal with all the
various ways we want to mutate the lucene index and translog we're opening.
We can:
1) Create an empty index
2) Use the lucene but create a new translog
3) Use both
4) Force a new history uuid in all cases.
This leads complicated code flows which makes it harder and harder to make sure we cover all the
corner cases. This PR tries to take another approach. Constructing an InternalEngine always opens
things as they are and all needed modifications are done by static methods directly on the
directory, one at a time.
* Decouple XContentBuilder from BytesReference
This commit removes all mentions of `BytesReference` from `XContentBuilder`.
This is needed so that we can completely decouple the XContent code and move it
into its own dependency.
While this change appears large, it is due to two main changes, moving
`.bytes()` and `.string()` out of XContentBuilder itself into static methods
`BytesReference.bytes` and `Strings.toString` respectively. The rest of the
change is code reacting to these changes (the majority of it in tests).
Relates to #28504
As we have factored Elasticsearch into smaller libraries, we have ended
up in a situation that some of the dependencies of Elasticsearch are not
available to code that depends on these smaller libraries but not server
Elasticsearch. This is a good thing, this was one of the goals of
separating Elasticsearch into smaller libraries, to shed some of the
dependencies from other components of the system. However, this now
means that simple utility methods from Lucene that we rely on are no
longer available everywhere. This commit copies IOUtils (with some small
formatting changes for our codebase) into the fold so that other
components of the system can rely on these methods where they no longer
depend on Lucene.
I have long wanted an actual test that dying with dignity works. It is
tricky because if dying with dignity works, it means the test JVM dies
which is usually an abnormal condition. And anyway, how does one force a
fatal error to be thrown. I was motivated to investigate this again by
the fact that I missed a backport to one branch leading to an issue
where Elasticsearch would not successfully die with dignity. And now we
have a solution: we install a plugin that throws an out of memory error
when it receives a request. We hack the standalone test infrastructure
to prevent this from failing the test. To do this, we bypass the
security manager and remove the PID file for the node; this tricks the
test infrastructure into thinking that it does not need to stop the
node. We also bypass seccomp so that we can fork jps to make sure that
Elasticsearch really died. And to be extra paranoid, we parse the logs
of the dead Elasticsearch process to make sure it died with
dignity. Never forget.
Today we have two test base classes that have a lot in common when it comes to testing wire and xcontent serialization: `AbstractSerializingTestCase` and `AbstractXContentStreamableTestCase`. There are subtle differences though between the two, in the way they work, what can be overridden and features that they support (e.g. insertion of random fields).
This commit introduces a new base class called `AbstractWireTestCase` which holds all of the serialization test code in common between `Streamable` and `Writeable`. It has two minimal subclasses called `AbstractWireSerializingTestCase` and `AbstractStreamableTestCase` which are specialized for `Writeable` and `Streamable`.
This commit also introduces a new test class called `AbstractXContentTestCase` for all of the xContent testing, which holds a testFromXContent method for parsing and rendering to xContent. This one can be delegated to from the existing `AbstractStreamableXContentTestCase` and `AbstractSerializingTestCase` so that we avoid code duplicate as much as possible and all these base classes offer the same functionalities in the same way. Having this last base class decoupled from the serialization testing may also help with the REST high-level client testing, as there are some classes where it's hard to implement equals/hashcode and this makes it possible to override `assertEqualInstances` for custom equality comparisons (also this base class doesn't require implementing equals/hashcode as it doesn't test such methods.
This commit is related to #27260. Currently there is a weird
relationship between channel contexts and nio channels. The selectors
use the context for read and writing. But the selector operates directly
on the nio channel for registering, closing, and connecting.
This commit works on improving this relationship. The selector operates
directly on the context which wraps the low level java.nio.channels. The
NioChannel class is simply an API that is used to interact with the
channel (sending messages from outside the selector event loop,
scheduling a close, adding listeners, etc). The context is only used
internally by the channel to implement these apis and by the selector to
perform these operations.
This allows us to save a bit of code, but also adds more coverage as it tests serialization which was missing in some of the existing tests. Also it requires implementing equals/hashcode and we get the corresponding tests for them for free from the base test class.
* Pass InputStream when creating XContent parser
Rather than passing the raw `BytesReference` in when creating the xcontent
parser, this passes the StreamInput (which is an InputStream), this allows us to
decouple XContent from BytesReference.
This also removes the use of `commons.Booleans` so it doesn't require more
external commons classes.
Related to #28504
* Undo boolean removal
* Enhance deprecation javadoc
Add support version and version_type in ingest pipelines
Add support for setting document version and version type in set
processor of an ingest pipeline.
* Remove log4j dependency from elasticsearch-core
This removes the log4j dependency from our elasticsearch-core project. It was
originally necessary only for our jar classpath checking. It is now replaced by
a `Consumer<String>` so that the es-core dependency doesn't have external
dependencies.
The parts of #28191 which were moved in conjunction (like `ESLoggerFactory` and
`Loggers`) have been moved back where appropriate, since they are not required
in the core jar.
This is tangentially related to #28504
* Add javadocs for `output` parameter
* Change @code to @link
Today we have several levels of indirection to acquire an Engine.Searcher.
We first acquire a the reference manager for the scope then acquire an
IndexSearcher and then create a searcher for the engine based on that.
This change simplifies the creation into a single method call instead of
3 different ones.
Previously we introduced a new parameter to `acquireIndexCommit` to
allow acquire either a safe commit or a last commit. However with the
new parameters, callers can provide a nonsense combination - flush first
but acquire the safe commit. This commit separates acquireIndexCommit
method into two different methods to avoid that problem. Moreover, this
change should also improve the readability.
Relates #28038
The REST high-level client supports now encoding of path parts, so that for instance documents with valid ids, but containing characters that need to be encoded as part of urls (`#` etc.), are properly supported. We also make sure that each path part can contain `/` by encoding them properly too.
Closes#28625
Armin Braun
Luca Cavanna
Nhat Nguyen
David Turner
Alpar Torok
Simon Willnauer
Tim Brooks
Lee Hinman
Ryan Ernst
Nik Everett
Christoph Büscher
Boaz Leskes
Jason Tedor
Lee Hinman
Yannick Welsch
Jay Modi
Jim Ferenczi
Tim Vernum
Yogesh Gaikwad
Daniel Mitterdorfer
Ioannis Kakavas
Andrey Ershov
Julie Tibshirani
Vladimir Dolzhenko
Colin Goodheart-Smithe
olcbean
Alexander Reelsen
Konrad Beiske
Tanguy Leroux
Sohaib Iftikhar
Jonathan Little
Tal Levy
Van0SS
olcbean
Martijn van Groningen
Adrien Grand
Zachary Tong
Stéphane Campinas
tomcallahan
Mayya Sharipova
Andy Bristol
Yu