x-pack/sql depends on lang-painless which depends on ASM 5.1
FeatureAwareCheck needs ASM 6
This is a hack to strip ASM5 from the classpath for FeatureAwareCheck
This is related to #27260. Currently when we queue a write with a
channel we set OP_WRITE and wait until the next selection loop to flush
the write. However, if the channel does not have a pending write, it
is probably ready to flush. This PR implements an optimistic flush logic
that will attempt this flush.
- All rollup pages should be marked as experimental instead of just
the top page
- While the job config docs state which aggregations are allowed, adding
a section which specifically details this in one place is more convenient
for the user
- Add a clarification that the DeleteJob API does not delete the rollup
data, just the rollup job.
The parser for the Metric config was directly instantiating
the config object, rather than using the builder. That means it was
bypassing the validation logic built into the builder, and would allow
users to create invalid metric configs (like using unsupported metrics).
The job would later blow up and abort due to bad configs, but this isn't
immediately obvious to the user since the PutJob API succeeded.
This change prevents a datafeed using cross cluster search from starting if the remote cluster
does not have x-pack installed and a sufficient license. The check is made only when starting a
datafeed.
Rules allow users to supply a detector with domain
knowledge that can improve the quality of the results.
The model detects statistically anomalous results but it
has no knowledge of the meaning of the values being modelled.
For example, a detector that performs a population analysis
over IP addresses could benefit from a list of IP addresses
that the user knows to be safe. Then anomalous results for
those IP addresses will not be created and will not affect
the quantiles either.
Another example would be a detector looking for anomalies
in the median value of CPU utilization. A user might want
to inform the detector that any results where the actual
value is less than 5 is not interesting.
This commit introduces a `custom_rules` field to the `Detector`.
A detector may have multiple rules which are combined with `or`.
A rule has 3 fields: `actions`, `scope` and `conditions`.
Actions is a list of what should happen when the rule applies.
The current options include `skip_result` and `skip_model_update`.
The default value for `actions` is the `skip_result` action.
Scope is optional and allows for applying filters on any of the
partition/over/by field. When not defined the rule applies to
all series. The `filter_id` needs to be specified to match the id
of the filter to be used. Optionally, the `filter_type` can be specified
as either `include` (default) or `exclude`. When set to `include`
the rule applies to entities that are in the filter. When set to
`exclude` the rule only applies to entities not in the filter.
There may be zero or more conditions. A condition requires `applies_to`,
`operator` and `value` to be specified. The `applies_to` value can be
either `actual`, `typical` or `diff_from_typical` and it specifies
the numerical value to which the condition applies. The `operator`
(`lt`, `lte`, `gt`, `gte`) and `value` complete the definition.
Conditions are combined with `and` and allow to specify numerical
conditions for when a rule applies.
A rule must either have a scope or one or more conditions. Finally,
a rule with scope and conditions applies when all of them apply.
TransportAction has many variants of execute. One of those variants
executes by returning a future, which is then often blocked on by
calling get(). This commit removes this variant of execute, instead
using a helper method for tests that want to block, or having tests
pass in a PlainActionFuture directly as a listener.
Co-authored-by: Simon Willnauer <simonw@apache.org>
This is in preparation of pushing the new
rules design in the `ml-cpp` side. These
tests will be switched on again after merging
in the new rules implementation.
* Support RequestedAuthnContext
This implements limited support for RequestedAuthnContext by :
- Allowing SP administrators to define a list of authnContextClassRef
to be included in the RequestedAuthnContext of a SAML Authn Request
- Veirifying that the authnContext in the incoming SAML Asertion's
AuthnStatement contains one of the requested authnContextClassRef
- Only EXACT comparison is supported as the semantics of validating
the incoming authnContextClassRef are deployment dependant and
require pre-established rules for MINIMUM, MAXIMUM and BETTER
Also adds necessary AuthnStatement validation as indicated by [1] and
[2]
[1] https://docs.oasis-open.org/security/saml/v2.0/saml-core-2.0-os.pdf
3.4.1.4, line 2250-2253
[2] https://kantarainitiative.github.io/SAMLprofiles/saml2int.html
[SDP-IDP10]
Trying to post a new watch without any body currently results in a
NullPointerException. This change fixes that by validating that
Post and Put requests always have a body.
Closes#30057
Allows users of the Low Level REST client to specify which hosts a
request should be run on. They implement the `NodeSelector` interface
or reuse a built in selector like `NOT_MASTER_ONLY` to chose which nodes
are valid. Using it looks like:
```
Request request = new Request("POST", "/foo/_search");
RequestOptions options = request.getOptions().toBuilder();
options.setNodeSelector(NodeSelector.NOT_MASTER_ONLY);
request.setOptions(options);
...
```
This introduces a new `Node` object which contains a `HttpHost` and the
metadata about the host. At this point that metadata is just `version`
and `roles` but I plan to add node attributes in a followup. The
canonical way to **get** this metadata is to use the `Sniffer` to pull
the information from the Elasticsearch cluster.
I've marked this as "breaking-java" because it breaks custom
implementations of `HostsSniffer` by renaming the interface to
`NodesSniffer` and by changing it from returning a `List<HttpHost>` to a
`List<Node>`. It *shouldn't* break anyone else though.
Because we expect to find it useful, this also implements `host_selector`
support to `do` statements in the yaml tests. Using it looks a little
like:
```
---
"example test":
- skip:
features: host_selector
- do:
host_selector:
version: " - 7.0.0" # same syntax as skip
apiname:
something: true
```
The `do` section parses the `version` string into a host selector that
uses the same version comparison logic as the `skip` section. When the
`do` section is executed it passed the off to the `RestClient`, using
the `ElasticsearchHostsSniffer` to sniff the required metadata.
The idea is to use this in mixed version tests to target a specific
version of Elasticsearch so we can be sure about the deprecation
logging though we don't currently have any examples that need it. We do,
however, have at least one open pull request that requires something
like this to properly test it.
Closes#21888
This commit upgrades us to Netty 4.1.25. This upgrade is more
challenging than past upgrades, all because of a new object cleaner
thread that they have added. This thread requires an additional security
permission (set context class loader, needed to avoid leaks in certain
scenarios). Additionally, there is not a clean way to shutdown this
thread which means that the thread can fail thread leak control during
tests. As such, we have to filter this thread from thread leak control.
The core REST tests with security currently use a hardcoded username and
password. This is not amenable to running these tests in scenarios where
the user controls the creation of the cluster and owns the credentials
for this cluster. This commit enables running the core REST tests with
security with a custom username and password.
The goal of this commit is to address unknown licenses when producing
the dependencies info report. We have two different checks that we run
on licenses. The first check is whether or not we have stashed a copy of
the license text for a dependency in the repository. The second is to
map every dependency to a license type (e.g., BSD 3-clause). The problem
here is that the way we were handling licenses in the second check
differs from how we handle licenses in the first check. The first check
works by finding a license file with the name of the artifact followed
by the text -LICENSE.txt. Yet in some cases we allow mapping an artifact
name to another name used to check for the license (e.g., we map
lucene-.* to lucene, and opensaml-.* to shibboleth. The second check
understood the first way of looking for a license file but not the
second way. So in this commit we teach the second check about the
mappings from artifact names to license names. We do this by copying the
configuration from the dependencyLicenses task to the dependenciesInfo
task and then reusing the code from the first check in the second
check. There were some other challenges here though. For example,
dependenciesInfo was checking too many dependencies. For now, we should
only be checking direct dependencies and leaving transitive dependencies
from another org.elasticsearch artifact to that artifact (we want to do
this differently in a follow-up). We also want to disable
dependenciesInfo for projects that we do not publish, users only care
about licenses they might be exposed to if they use our assembled
products. With all of the changes in this commit we have eliminated all
unknown licenses. A follow-up will enforce that when we add a new
dependency it does not get mapped to unknown, these will be forbidden in
the future. Therefore, with this change and earlier changes are left
having no unknown licenses and two custom licenses; custom here means it
does not map to an SPDX license type. Those two licenses are xz and
ldapsdk. A future change will not allow additional custom licenses
unless they are explicitly whitelisted. This ensures that if a new
dependency is added it is mapped to an SPDX license or mapped to custom
because it does not have an SPDX license.
* Remove DocumentFieldMappers#simpleMatchToFullName, as it is duplicative of MapperService#simpleMatchToIndexNames.
* Rename MapperService#simpleMatchToIndexNames -> simpleMatchToFullName for consistency.
* Simplify EsIntegTestCase#assertConcreteMappingsOnAll to accept concrete fields instead of wildcard patterns.
Make SAML Response Destination check compliant
Only validate the Destination element of an incoming SAML Response
if Destination is present and the SAML Response is signed.
The standard [1] - 3.5.5.2 and [2] - 3.2.2 does mention that the
Destination element is optional and should only be verified when
the SAML Response is signed. Some Identity Provider implementations
are known to not set a Destination XML Attribute in their SAML
responses when those are not signed, so this change also aims to
enhance interoperability.
[1] https://docs.oasis-open.org/security/saml/v2.0/saml-bindings-2.0-os.pdf
[2] https://docs.oasis-open.org/security/saml/v2.0/saml-core-2.0-os.pdf
Use all running nodes as unicast seeds in the rolling restart tests to
avoid a race between pinging and the tests. Without this if the tests
are too fast then when a new node comes up and pings its single
configured seed node that node *might* not have a ping from the other
running node.
This is related to #27260 and #28898. This commit adds the transport-nio
plugin as a random option when running the http smoke tests. As part of
this PR, I identified an issue where cors support was not properly
enabled causing these tests to fail when using transport-nio. This
commit also fixes that issue.
This commit adjusts the indentation in the CLI scripts to give a clear
visual indication that the line being indented is a continuation of the
previous line.
SSLTrustRestrictionsTests updates the restrictions YML file during the test run to change the set of restrictions. This update was small, but it wasn't atomic.
If the yml file is reloaded while empty or invalid, then it causes all SSL certificates to be considered invalid (until it is reloaded again), which could break the sniffing/administrative client that runs underneath the tests.
A previous refactoring of the CLI scripts migrated all of the CLI tools
to shell to a common script, elasticsearch-cli. This approach is fine in
Bash where it is easy to tear arguments apart but it doesn't work so
well on Windows where quoting is insane. To avoid having to tear the
arguments apart to separate the first argument to elasticsearch-cli from
the remaining arguments, we instead choose a strategy where we can avoid
tearing the arguments apart. To do this, we will instead pass the main
class by an environment variable and then we can pass the arguments
straight through. This will let us avoid awful quoting issues on
Windows. This is the Windows side of that effort and the Bash side was
in a previous commit.
A previous refactoring of the CLI scripts migrated all of the CLI tools
to shell to a common script, elasticsearch-cli. This approach is fine in
Bash where it is easy to tear arguments apart but it doesn't work so
well on Windows where quoting is insane. To avoid having to tear the
arguments apart to separate the first argument to elasticsearch-cli from
the remaining arguments, we instead choose a strategy where we can avoid
tearing the arguments apart. To do this, we will instead pass the main
class by an environment variable and then we can pass the arguments
straight through. This will let us avoid awful quoting issues on
Windows. This is the non-Windows side of that effort and the Windows
side will be in a follow-up.
This is related to #27260. This commit combines the AcceptingSelector
and SocketSelector classes into a single NioSelector. This change
allows the same selector to handle both server and socket channels. This
is valuable as we do not necessarily want a dedicated thread running for
accepting channels.
With this change, this commit removes the configuration for dedicated
accepting selectors for the normal transport class. The accepting
workload for new node connections is likely low, meaning that there is
no need to dedicate a thread to this process.
I pushed a test that `assertBusy`s for a whole hour accidentally. I was
testing something and forgot to revert my local hack but caught it on
backport. This removes it.
This is much more realistic and can find more issues. This causes the
"mixed cluster" tests to be run twice so I had to fix the tests to work
in that case. In most cases I did as little as possible to get them
working but in a few cases I went a little beyond that to make them
easier for me to debug while getting them to work. My test changes:
1. Remove the "basic indexing" tests and replace them with a copy of the
tests used in the OSS. We have no way of sharing code between these two
projects so for now I copy.
2. Skip the a few tests in the "one third" upgraded scenario:
* creating a scroll to be reused when the cluster is fully upgraded
* creating some ml data to be used when the cluster is fully ugpraded
3. Drop many "assert yellow and that the cluster has two nodes"
assertions. These assertions duplicate those made by the wait condition
and they fail now that we have three nodes.
4. Switch many "assert green and that the cluster has two nodes" to 3
nodes. These assertions are unique from the wait condition and, while
I imagine they aren't required in all cases, now is not the time to
find that out. Thus, I made them work.
5. Rework the index audit trail test so it is more obvious that it is
the same test expecting different numbers based on the shape of the
cluster. The conditions for which number are expected are fairly
complex because the index audit trail is shut down until the template
for it is upgraded and the template is upgraded when a master node is
elected that has the new version of the software.
6. Add some more information to debug the index audit trail test because
it helped me figure out what was going on.
I also dropped the `waitCondition` from the `rolling-upgrade-basic`
tests because it wasn't needed.
Closes#25336
The native realm's usage stats were previously pulled from the cache,
which only contains the number of users that had authenticated in the
past 20 minutes. This commit changes this so that we pull the current
value from the security index by executing a search request. In order
to support this, the usage stats for realms is now asynchronous so that
we do not block while waiting on the search to complete.
The Index Audit trail allows the override of the template index
settings with settings specified on the conf file.
A bug will manifest when such conf file settings are specified
for templates that need to be upgraded. The bug is an endless
upgrade loop because the upgrade, although successful, is
not reckoned as such by the upgrade service.
move `finger_print`, `pattern` and `standard_html_strip` analyzers
to analysis-common module. (both AnalysisProvider and PreBuiltAnalyzerProvider)
Changed PreBuiltAnalyzerProviderFactory to extend from PreConfiguredAnalysisComponent and
changed to make sure that predefined analyzers are always instantiated with the current
ES version and if an instance is requested for a different version then delegate to PreBuiltCache.
This is similar to the behaviour that exists today in AnalysisRegistry.PreBuiltAnalysis and
PreBuiltAnalyzerProviderFactory. (#31095)
Relates to #23658
This commit adds a check that any class in X-Pack that is a feature
aware custom also implements the appropriate mix-in interface in
X-Pack. These interfaces provide a default implementation of
FeatureAware#getRequiredFeature that returns that x-pack is the required
feature. By implementing this interface, this gives a consistent way for
X-Pack feature aware customs to return the appopriate required feature
and this check enforces that all such feature aware customs return the
appropriate required feature.
We should not allow the user to configure index patterns that also match
the index which stores the rollup index.
For example, it is quite natural for a user to specify `metricbeat-*`
as the index pattern, and then store the rollups in `metricbeat-rolled`.
This will start throwing errors as soon as the rollup index is created
because the indexer will try to search it.
Note: this does not prevent the user from matching against existing
rollup indices. That should be prevented by the field-level validation
during job creation.
ObjectParser should throw XContentParseExceptions, not IAE. A dedicated parsing
exception can includes the place where the error occurred.
Closes#30605
This snapshot includes:
- LUCENE-8341: Record soft deletes in SegmentCommitInfo which will resolve#30851
- LUCENE-8335: Enforce soft-deletes field up-front
Extends ActionRequestValidationException with a rollup-specific version
to make it easier to handle mapping validation issues on the client
side.
The type will now be `rollup_action_request_validation_exception`
instead of `action_request_validation_exception`
The majority of Responses inheriting from AcknowledgeResponse implement
the readFrom and writeTo serialization method in the same way. Moving this
as a default into AcknowledgeResponse and letting the few exceptions that
need a slightly different implementation handle this themselves saves a lot
of duplication.
With #31020 we introduced the ability for transport clients to indicate what features they support
in order to make sure we don't serialize object to them they don't support. This PR adapts the
serialization logic of persistent tasks to be aware of those features and not serialize tasks that
aren't supported.
Also, a version check is added for the future where we may add new tasks implementations and
need to be able to indicate they shouldn't be serialized both to nodes and clients.
As the implementation relies on the interface of `PersistentTaskParams`, these are no longer
optional. That's acceptable as all current implementation have them and we plan to make
`PersistentTaskParams` more central in the future.
Relates to #30731
If you invoke elasticsearch-plugin (or any other CLI script on Windows)
with a path that has a percent-encoded space (or any other
percent-encoded character) because the CLI scripts now shell into a
common shell script (elasticsearch-cli) the percent-encoded space ends
up being interpreted as a parameter. For example passing install --batch
file:/c:/encoded%20%space/analysis-icu-7.0.0.zip to elasticsearch-plugin
leads to the %20 being interpreted as %2 followed by a zero. Here, the
%2 is interpreted as the second parameter (--batch) and the
InstallPluginCommand class ends up seeing
file:/c/encoded--batch0space/analysis-icu-7.0.0.zip as the path which
will not exist. This commit addresses this by escaping the %* that is
used to pass the parameters to the common CLI script so that the common
script sees the correct parameters without the %2 being substituted.
This commit introduces the ability for a client to communicate to the
server features that it can support and for these features to be used in
influencing the decisions that the server makes when communicating with
the client. To this end we carry the features from the client to the
underlying stream as we carry the version of the client today. This
enables us to enhance the logic where we make protocol decisions on the
basis of the version on the stream to also make protocol decisions on
the basis of the features on the stream. With such functionality, the
client can communicate to the server if it is a transport client, or if
it has, for example, X-Pack installed. This enables us to support
rolling upgrades from the OSS distribution to the default distribution
without breaking client connectivity as we can now elect to serialize
customs in the cluster state depending on whether or not the client
reports to us using the feature capabilities that it can under these
customs. This means that we would avoid sending a client pieces of the
cluster state that it can not understand. However, we want to take care
and always send the full cluster state during node-to-node communication
as otherwise we would end up with different understanding of what is in
the cluster state across nodes depending on which features they reported
to have. This is why when deciding whether or not to write out a custom
we always send the custom if the client is not a transport client and
otherwise do not send the custom if the client is transport client that
does not report to have the feature required by the custom.
Co-authored-by: Yannick Welsch <yannick@welsch.lu>
Otherwise we could end up with persistent tasks metadata in the cluster that some of the nodes
might not understand in case where the cluster is during rolling upgrade from the default 6.2 to the
default 6.3 distribution.
Follow-up to #30743
In case an error is returned when calling search_shards on a remote
cluster, which will lead to throwing an exception in the coordinating
node, we should make sure that the status code returned by the
coordinating node is the same as the one returned by the remote
cluster. Up until now a 500 - Internal Server Error was always
returned. This commit changes this behaviour so that for instance if an
index is not found, which causes an 404, a 404 is also returned by the
coordinating node to the client.
Closes#27461
* Retain the expiryDate for trial licenses
While updating the license signature to the new license spec retain
the trial license expiration date to that of the existing license.
Resolves#30882
Although elasticsearch-certutil generates PKCS#12
files which are usable as both keystore and truststore
this is uncommon in practice. Settle these expectations
for the users following our security guides.
This modifies the high level rest client to allow calling code to
customize per request options for the bulk API. You do the actual
customization by passing a `RequestOptions` object to the API call
which is set on the `Request` that is generated by the high level
client. It also makes the `RequestOptions` a thing in the low level
rest client. For now that just means you use it to customize the
headers and the `httpAsyncResponseConsumerFactory` and we'll add
node selectors and per request timeouts in a follow up.
I only implemented this on the bulk API because it is the first one
in the list alphabetically and I wanted to keep the change small
enough to review. I'll convert the remaining APIs in a followup.
* Ensure that a purposefully wrong key is used
Uses a specific keypair for tests that require a purposefully wrong
keypair instead of selecting one randomly from the same pull from
which the correct one is selected. Entropy is low because of the
small space and the same key can be randomly selected as both the
correct one and the wrong one, causing the tests to fail.
The purposefully wrong key is also used in
testSigningKeyIsReloadedForEachRequest and needs to be cleaned
up afterwards so the rest of the tests don't use that for signing.
Resolves#30970
This commit removes the RequestBuilder generic type from Action. It was
needed to be used by the newRequest method, which in turn was used by
client.prepareExecute. Both of these methods are now removed, along with
the existing users of prepareExecute constructing the appropriate
builder directly.
This commit reworks the Sniffer component to simplify it and make it possible to test it.
In particular, it no longer takes out the host that failed when sniffing on failure, but rather relies on whatever the cluster returns. This is the result of some valid comments from #27985. Taking out one single host is too naive, hard to test and debug.
A new Scheduler abstraction is introduced to abstract the tasks scheduling away and make it possible to plug in any test implementation and take out timing aspects when testing.
Concurrency aspects have also been improved, synchronized methods are no longer required. At the same time, we were able to take #27697 and #25701 into account and fix them, especially now that we can more easily add tests.
Last but not least, unit tests are added for the Sniffer component, long overdue.
Closes#27697Closes#25701
This code is from an Apache 2.0 licensed codebase and when we imported
it into our codebase it carried the Apache 2.0 license as well. However,
during the migration of the X-Pack codebase from the internal private
repository to the elastic/elasticsearch repository, the migration tool
mistakently changed the license on this source file from the Apache 2.0
license to the Elastic license. This commit addresses this mistake by
reapplying the Apache 2.0 license.
Currently failures to compile a script usually lead to a ScriptException, which
inherits the 500 INTERNAL_SERVER_ERROR from ElasticsearchException if it does
not contain another root cause. Instead, this should be a 400 Bad Request error.
This PR changes this more generally for script compilation errors by changing
ScriptException to return 400 (bad request) as status code.
Closes#12315
This commit renames methods in the PersistentTasksService, to
make obvious that the methods send requests in order to change
the state of persistent tasks.
Relates to #29608.
Tim Vernum
Tanguy Leroux
Costin Leau
Tim Brooks
lcawl
Tal Levy
Costin Leau
Zachary Tong
David Kyle
Tom Veasey
Dimitris Athanasiou
Ryan Ernst
Jason Tedor
James Baiera
Albert Zaharovits
Yuri Tceretian
Ioannis Kakavas
Aditya Dhulipala
Nik Everett
Julie Tibshirani
Igor Motov
Hendrik Muhs
Tim Vernum
Jay Modi
Martijn van Groningen
Jim Ferenczi
Yannick Welsch
Christoph Büscher
Nhat Nguyen
Michael Russell
Boaz Leskes
Luca Cavanna
David Roberts