There are three ways `@Test` was used. Way one:
```java
@Test
public void flubTheBlort() {
```
This way was always replaced with:
```java
public void testFlubTheBlort() {
```
Or, maybe with a better method name if I was feeling generous.
Way two:
```java
@Test(throws=IllegalArgumentException.class)
public void testFoo() {
methodThatThrows();
}
```
This way of using `@Test` is actually pretty OK, but to get the tools to ban
`@Test` entirely it can't be used. Instead:
```java
public void testFoo() {
try {
methodThatThrows();
fail("Expected IllegalArgumentException");
} catch (IllegalArgumentException e ) {
assertThat(e.getMessage(), containsString("something"));
}
}
```
This is longer but tests more than the old ways and is much more precise.
Compare:
```java
@Test(throws=IllegalArgumentException.class)
public void testFoo() {
some();
copy();
and();
pasted();
methodThatThrows();
code(); // <---- This was left here by mistake and is never called
}
```
to:
```java
@Test(throws=IllegalArgumentException.class)
public void testFoo() {
some();
copy();
and();
pasted();
try {
methodThatThrows();
fail("Expected IllegalArgumentException");
} catch (IllegalArgumentException e ) {
assertThat(e.getMessage(), containsString("something"));
}
}
```
The final use of test is:
```java
@Test(timeout=1000)
public void testFoo() {
methodThatWasSlow();
}
```
This is the most insidious use of `@Test` because its tempting but tragically
flawed. Its flaws are:
1. Hard and fast timeouts can look like they are asserting that something is
faster and even do an ok job of it when you compare the timings on the same
machine but as soon as you take them to another machine they start to be
invalid. On a slow VM both the new and old methods fail. On a super-fast
machine the slower and faster ways succeed.
2. Tests often contain slow `assert` calls so the performance of tests isn't
sure to predict the performance of non-test code.
3. These timeouts are rude to debuggers because the test just drops out from
under it after the timeout.
Confusingly, timeouts are useful in tests because it'd be rude for a broken
test to cause CI to abort the whole build after it hits a global timeout. But
those timeouts should be very very long "backstop" timeouts and aren't useful
assertions about speed.
For all its flaws `@Test(timeout=1000)` doesn't have a good replacement __in__
__tests__. Nightly benchmarks like http://benchmarks.elasticsearch.org/ are
useful here because they run on the same machine but they aren't quick to check
and it takes lots of time to figure out the regressions. Sometimes its useful
to compare dueling implementations but that requires keeping both
implementations around. All and all we don't have a satisfactory answer to the
question "what do you replace `@Test(timeout=1000)`" with. So we handle each
occurrence on a case by case basis.
For files with `@Test` this also:
1. Removes excess blank lines. They don't help anything.
2. Removes underscores from method names. Those would fail any code style
checks we ever care to run and don't add to readability. Since I did this manually
I didn't do it consistently.
3. Make sure all test method names start with `test`. Some used to end in `Test` or start
with `verify` or `check` and they were picked up using the annotation. Without the
annotation they always need to start with `test`.
4. Organizes imports using the rules we generate for Eclipse. For the most part
this just removes `*` imports which is a win all on its own. It was "required"
to quickly remove `@Test`.
5. Removes unneeded casts. This is just a setting I have enabled in Eclipse and
forgot to turn off before I did this work. It probably isn't hurting anything.
6. Removes trailing whitespace. Again, another Eclipse setting I forgot to turn
off that doesn't hurt anything. Hopefully.
7. Swaps some tests override superclass tests to make them empty with
`assumeTrue` so that the reasoning for the skips is logged in the test run and
it doesn't "look like" that thing is being tested when it isn't.
8. Adds an oxford comma to an error message.
The total test count doesn't change. I know. I counted.
```bash
git checkout master && mvn clean && mvn install | tee with_test
git no_test_annotation master && mvn clean && mvn install | tee not_test
grep 'Tests summary' with_test > with_test_summary
grep 'Tests summary' not_test > not_test_summary
diff with_test_summary not_test_summary
```
These differ somewhat because some tests are skipped based on the random seed.
The total shouldn't differ. But it does!
```
1c1
< [INFO] Tests summary: 564 suites (1 ignored), 3171 tests, 31 ignored (31 assumptions)
---
> [INFO] Tests summary: 564 suites (1 ignored), 3167 tests, 17 ignored (17 assumptions)
```
These are the core unit tests. So we dig further:
```bash
cat with_test | perl -pe 's/\n// if /^Suite/;s/.*\n// if /IGNOR/;s/.*\n// if /Assumption #/;s/.*\n// if /HEARTBEAT/;s/Completed .+?,//' | grep Suite > with_test_suites
cat not_test | perl -pe 's/\n// if /^Suite/;s/.*\n// if /IGNOR/;s/.*\n// if /Assumption #/;s/.*\n// if /HEARTBEAT/;s/Completed .+?,//' | grep Suite > not_test_suites
diff <(sort with_test_suites) <(sort not_test_suites)
```
The four tests with lower test numbers are all extend `AbstractQueryTestCase`
and all have a method that looks like this:
```java
@Override
public void testToQuery() throws IOException {
assumeTrue("test runs only when at least a type is registered", getCurrentTypes().length > 0);
super.testToQuery();
}
```
It looks like this method was being double counted on master and isn't anymore.
Closes#14028
* Add ability for plugins to declare additional permissions with a custom plugin-security.policy file and corresponding AccessController logic. See the plugin author's guide for more information.
* Add warning messages to users for extra plugin permissions in bin/plugin.
* When bin/plugin is run interactively (stdin is a controlling terminal and -b/--batch not supplied), require user confirmation.
* Improve unit test and IDE support for plugins with additional permissions by exposing plugin's metadata as a maven test resource.
Closes#14108
Squashed commit of the following:
commit cf8ace65a7397aaccd356bf55f95d6fbb8bb571c
Author: Robert Muir <rmuir@apache.org>
Date: Wed Oct 14 13:36:05 2015 -0400
fix new unit test from master merge
commit 9be3c5aa38f2d9ae50f3d54924a30ad9cddeeb65
Merge: 2f168b8 7368231
Author: Robert Muir <rmuir@apache.org>
Date: Wed Oct 14 12:58:31 2015 -0400
Merge branch 'master' into off_my_back
commit 2f168b8038e32672f01ad0279fb5db77ba902ae8
Author: Robert Muir <rmuir@apache.org>
Date: Wed Oct 14 12:56:04 2015 -0400
improve plugin author documentation
commit 6e6c2bfda68a418d92733ac22a58eec35508b2d0
Author: Robert Muir <rmuir@apache.org>
Date: Wed Oct 14 12:52:14 2015 -0400
move security confirmation after 'plugin already installed' check, to prevent user from answering unnecessary questions.
commit 08233a2972554afef2a6a7521990283102e20d92
Author: Robert Muir <rmuir@apache.org>
Date: Wed Oct 14 05:36:42 2015 -0400
Add documentation and pluginmanager support
commit 05dad86c51488ba43ccbd749f0164f3fbd3aee62
Author: Robert Muir <rmuir@apache.org>
Date: Wed Oct 14 02:22:24 2015 -0400
Decentralize plugin permissions (modulo docs and pluginmanager work)
IndexReader#addReaderCloseListener is very error prone when it comes to
caching and reader wrapping. The listeners are not delegated to the sub readers
nor can it's implementation change since it's final in the base class. This commit
only allows installing close listeners on the top level ElasticsearchDirecotryReader
which is known to work an has a defined lifetime which corresponds to its subreader.
This ensure that cachesa re cleared once the reader goes out of scope.
This commit removes and now forbids all uses of
com.google.common.net.InetAddresses across the codebase. This is one of
the few remaining steps in the eventual removal of Guava as a
dependency.
Relates #13224
This commit removes and now forbids all uses of
com.google.common.collect.Iterators across the codebase. This is one of
the final steps in the eventual removal of Guava as a dependency.
Relates #13224
This commit removes and now forbids all uses of
com.google.common.hash.HashCode, com.google.common.hash.HashFunction,
and com.google.common.hash.Hashing across the codebase. This is one of
the few remaining steps in the eventual removal of Guava as a
dependency.
Relates #13224
Mostly favoring unmodifiableMap and making sure to only wrap maps that aren't
otherwise returned and so cannot be copied.
MapMaker#immutableMap has to go next.
We're concerned that unmodifiableMap uses significantly more memory than
ImmutableMap did - especially in cluster state - so we ban it there outright
and move to ImmutableOpenMap.
Removes ClusterState$Builder#routingTable(RoutingTable$Builder) because that
method had the side effect of building the routing table which can only be
done once per RoutingTable$Builder now that it uses ImmutableOpenMap.
Banning `ImmutableSet` outright is too much to do all at once - this starts
the process by banning `ImmutableMap#entrySet` - one of the more common ways
that `ImmutableSet`s come up. It then starts to remove calls to
`ImmutableMap#entrySet` by changing declarations from `ImmutableMap` to `Map`.
Unfortunately this process is like pulling on a long, windy string and one
declaration change requires another which requires 5 more which in turn
require another few. So this change is rather large.
As such, to keep the changes manageable they only remove `ImmutableMap` from
the signatures that are needed for `entrySet` and make little effort to stop
using `ImmutableMap` internally. Removing the usages of `ImmutableMap`
complicates immutability guarantees and will be done separately.
Until now we had a cloud-azure plugin which is providing 3 distinct features:
* discovery on Azure
* snapshot/restore on Aure
* SMB store
This commit splits the plugin by feature so people can use either one or the other or both features.
Doc is updated accordingly.
This commit removes and now forbids all uses of
com.google.common.primitives.Ints across the codebase. This is one of
many steps in the eventual removal of Guava as a dependency.
Relates #13224
In order to be able to clean up broken steps in the release, one should
be able to run each step individually. So now one needs to specifiy each
step to run via cmdline argument
* --deploy-sonatype: runs `mvn deploy` and pushes to the staging mvn repo
* --deploy-s3: copies all artifacts over to the s3bucket
* --deploy-s3-repos: Creates the s3 repositories
* --no-install option, so that an existing mvn repo can be used for s3 operations
Also, several minor changes have been added
* Fixed typo in smoke test reference for email
* Checking for correct AWS environment variables
* Only create releases directory if it does not exist
* RPM sign check is only executed after `mvn install`
* Various path fixes for deb/rpm-s3 uploads
* Added output of deb/rpm-s3 commands for easier debugging
* Add configurable destination s3 bucket
* Removed verbosity, always be verbose
* Added color to the command which is being running right now, to differentiate from console output
This commit removes and now forbids all uses of
com.google.common.base.Joiner across the codebase. This is one of many
steps in the eventual removal of Guava as a dependency.
Relates #13224
This commit removes and now forbids all uses of
com.google.common.math.LongMath across the codebase. This is one step
of many in the eventual removal of Guava as a dependency.
This commit removes and now forbids all uses of
com.google.common.collect.Iterables across the codebase. This is one of
many steps in the eventual removal of Guava as a dependency.
Relates #13224
This commit removes and now forbids all uses of
com.google.common.base.Preconditions across the codebase. This is one
of many steps in the eventual removal of Guava as a dependency.
Relates #13224
* Automatic package repository creation for debian and rpm repositories using deb-s3 and rpm-s3 tools
* Fixing paths in email for repositories
* Add manual verification step for maven staging repo
* Do not create release directory in /tmp, because we might loose it on VMs
* Removed unused download-s3 script
* Add signage check for RPM
* Removed download-s3.py/upload-s3.py, as they are unused
Closes#13209
This commit replaces the usage of LoadedCache with a simple CHM and calls
to computeIfAbsent and adds LoadingCache and CacheLoader to forbidden APIs
Relates to #13224
* Added BWC indices
* Added snapshot version to Version.java
* Fixed create_bwc_index to use localhost instead of localhost and 127.0.0.1 (problem with ipv4/6 setup)
Nik Everett
Adrien Grand
Robert Muir
Simon Willnauer
Jason Tedor
David Pilato
Alexander Reelsen
Chris Earle