Currently we suggesting users create a Node (using NodeBuilder in 2.x) to have a client that is capable of keeping up-to-date information. This is generally a bad idea as it means elasticsearch has no control over eg max heap size or gc settings, and is also problematic for users because they must deal with dependency collisions (and in 2.x+ dependencies of elasticsearch itself).
A better alternative, and what we should document, is to run a local elasticsearch server using bin/elasticsearch, and then use the transport client to connect to that local node. This local connection is virtually free, and allows the client code to be completely isolated from the elasticsearch process. Plugins are then also easy to deal with: just install them in elasticsearch as usual.
Related to #16679
2.x has show so far that running with security manager is the way to go.
This commit make this non-optional. Users that need to pass their own rules
can still do this via the system configuration for the security manager. They
can even opt out of all security that way.
This setting was missing from the docs, so I added it. However, I also
completely rewrote the nodes documentation page because it was mostly
talking about client nodes with some issues, without ever discussing
master nodes, or even tribe nodes. All nodes should be listed on a
"nodes" documentation page.
Fixes#15903Fixed#14429
Today we throttle recoveries only for incoming recoveries. Nodes that have a lot
of primaries can get overloaded due to too many recoveries. To still keep that at bay
we limit the number of threads that are sending files to the target to overcome this problem.
The right solution here is to also throttle the outgoing recoveries that are today unbounded on
the master and don't start the recovery until we have enough resources on both source and target nodes.
The concurrency aspects of the recovery source also added a lot of complexity and additional threadpools
that are hard to configure. This commit removes the concurrent streamns notion completely and sends files
in the thread that drives the recovery simplifying the recovery code considerably.
Outgoing recoveries are not throttled on the master via a allocation decider.
This makes some minor improvements (does not fix all problems!)
It reorders unicast disco in elasticsearch.yml to be right after the network host,
for better locality.
It removes the warning (unreleased) about publish addresses, lets try to really discourage setting
that unless you need to (behind a proxy server). Most people should be fine with `network.host`
Finally it reorganizes the network docs page a bit:
We add a table of 4 "basic" settings at the very beginning:
* network.host
* discovery.zen.ping.unicast.hosts
* http.port
* transport.tcp.port
The first two being the most important, which addresses to bind and talk to, and the other two
being the port numbers.
The rest of the stuff I tried to simplify and reorder under "advanced" headers.
This is just a quick stab, I still think we need more effort into this thing, but we gotta start somewhere.
This commit forbids the changing of thread pool types for any thread
pool. The motivation here is that these are expert settings with
little practical advantage.
Closes#14294, relates #2509, relates #2858, relates #5152
* Allow for multiple host specifications (e.g. _en0_,192.168.1.2,_site_).
* Add _site_ and _global_ scopes as counterparts to _local_.
* Warn on heuristic selection of publish address.
* Remove the arbitrary _non_loopback_ setting.
Closes#13954
When running in GCE platform, an instance has access to:
http://metadata.google.internal/computeMetadata/v1/instance/network-interfaces/0/ip
Which gives back the private IP address, for example `10.240.0.2`.
http://metadata.google.internal/computeMetadata/v1/instance/network-interfaces/0/externalIp
Gives back the public Ip address, for example `130.211.108.21`.
As we have for `ec2`, we can support new network host settings:
* `_gce:privateIp:X_`: The private IP address of the machine for a given network interface.
* `_gce:hostname_`: The hostname of the machine.
* `_gce_`: Same as `_gce:privateIp:0_` (recommended).
Closes#13605.
Closes#13590.
BTW resolveIfPossible now throws IOException so code is also updated for ec2 discovery and
some basic tests have been added.
With 2.0, we now bind to `localhost` by default instead of binding to the network card and use its IP address.
When the discovery plugin gets from AWS API the list of nodes that should form the cluster, this list is pinged then. But as each node is bound to `localhost`, ping does not get an answer and the node elects itself as the master node.
`network.host` must be set.
Closes#13589.
Until now we had a cloud-azure plugin which is providing 3 distinct features:
* discovery on Azure
* snapshot/restore on Aure
* SMB store
This commit splits the plugin by feature so people can use either one or the other or both features.
Doc is updated accordingly.
Until now we had a cloud-aws plugin which is providing 2 disctinct features:
* discovery on EC2
* snapshot/restore on S3
This commit splits the plugin by feature so people can use either one or the other or both features.
Doc is updated accordingly.
Prior to 2.0 we summed up the available space on all disk on a node
due to the raid-0 like behavior. Now we don't do this anymore and use the
min & max disk space to make decisions.
Closes#13106
Multicast has known issues (see #12999 and #12993). This change moves
multicast into a plugin, and deprecates it in the docs. It also allows
for plugging in multiple zen ping implementations.
closes#13019
Fix unicast discovery to work when a host has multiple addresses.
Ban dangerous methods in java.net with forbidden APIs.
Fix ipv6 bugs and formatting of network addresses everywhere.
Closes#12999Closes#12993
Squashed commit of the following:
commit 6c1aa001d091c5cf25212a53dc701fb704337f1e
Author: Robert Muir <rmuir@apache.org>
Date: Thu Aug 20 14:25:43 2015 -0400
Fix these to be correct with addresses just in case
commit 648215627e84abf58a71400e7dc9ae775efb71d6
Merge: d00561b 41d8fbe
Author: Robert Muir <rmuir@apache.org>
Date: Thu Aug 20 13:23:09 2015 -0400
Merge branch 'master' into unicast_all_the_way_down
commit d00561b76fd1aa5850699f7901f3dae3d4d402b7
Author: Simon Willnauer <simonw@apache.org>
Date: Thu Aug 20 16:38:50 2015 +0200
limit local ports to 5 in UnicastZenPing
commit e2e15c594006746cbe24432694294a71cc99deb8
Author: Robert Muir <rmuir@apache.org>
Date: Thu Aug 20 10:32:47 2015 -0400
fix port limiting
commit 10153cb7adadda81a1f482445e703836b65cf5e2
Author: Robert Muir <rmuir@apache.org>
Date: Thu Aug 20 10:18:37 2015 -0400
don't serialize scopeids: that's broken
commit 2aa63d43db2baec68a2e9bc227cfeb85dfeb4f83
Author: Simon Willnauer <simonw@apache.org>
Date: Thu Aug 20 16:06:51 2015 +0200
restore @Network
commit c840f1d1ef438826ae1ecfd5e45942a0e30dc9c0
Author: Simon Willnauer <simonw@apache.org>
Date: Thu Aug 20 16:02:30 2015 +0200
Use NetworkAddress.formatAddress where applicable in plugins
commit 374ce878852b35d626b7a29c8c4773545b0e9ddd
Author: Simon Willnauer <simonw@apache.org>
Date: Thu Aug 20 15:34:06 2015 +0200
Use NetworkAddress.formatAddress where applicable
commit e7a606d63f1bc43c1b62b6e17adf707c76d43a15
Author: Simon Willnauer <simonw@apache.org>
Date: Thu Aug 20 10:17:57 2015 +0200
Add @Multicast annotation to disable multicast tests by default.
We only run multicast tests now when we explicitly state it. A working
multicast env is required which is not always the case.
commit 2d7d2d0347179696ab41f71f048b13305014c85b
Author: Simon Willnauer <simonw@apache.org>
Date: Thu Aug 20 09:51:28 2015 +0200
Remove extra check for local mode in InternalTestCluster
commit dda59ac39aa136d4687b9274c2692cd77f8b8f66
Author: Simon Willnauer <simonw@apache.org>
Date: Thu Aug 20 09:37:03 2015 +0200
Handle node mode across entire test cluster
We used static methods reading sys properties to define the node mode
per cluster. this had lots of problems when tests couldn't cope with
mixed or only local mode. Now we are passing it down to the cluster from the test
which allows to @SuppressNetworkMode / @SupressLocalMode on the test to force
consistent node configurations.
commit 058197b7a408318995c88ce7f6762e32348de0de
Author: Robert Muir <rmuir@apache.org>
Date: Thu Aug 20 03:19:14 2015 -0400
really ban InetSocketAddress's trappy method and break build and go to sleep, sorry
commit ac8779185aee1e17e6f5a81766290fdfc9c603ba
Author: Robert Muir <rmuir@apache.org>
Date: Thu Aug 20 03:16:52 2015 -0400
Ban methods that might surprisingly cause DNS lookups
commit e64fe3dff2b11503e5f2831eb9863d64f56c5538
Author: Robert Muir <rmuir@apache.org>
Date: Thu Aug 20 02:59:05 2015 -0400
Add unit test
commit f15434f20fb1a3691b1cc16028597d8fae937e05
Author: Robert Muir <rmuir@apache.org>
Date: Thu Aug 20 02:39:02 2015 -0400
fix ipv6 formatting bugs
commit 05c2c74098052c75fbb79ea1818a295ef2e03e30
Author: Robert Muir <rmuir@apache.org>
Date: Thu Aug 20 02:12:05 2015 -0400
format addresses correctly so I can actually read what comes out of our logs and stats apis
commit 4f9389dcf1e8925f23153c5eb271b4ce2294dbaf
Author: Robert Muir <rmuir@apache.org>
Date: Wed Aug 19 21:26:52 2015 -0400
ban dangerous methods in java.net
commit 6aacd4d9925f324903d1d099a6cf5f862aeaf677
Author: Robert Muir <rmuir@apache.org>
Date: Wed Aug 19 20:59:24 2015 -0400
ban lenient method
commit f466a842c60163d1f4554bdce8a4163edb534c2c
Author: Simon Willnauer <simonw@apache.org>
Date: Thu Aug 20 00:29:00 2015 +0200
fix tests to not mix local transport and zen unicast disco
commit 0de007a33b33fb68cf85cd86db4ca4f8ce10bbc9
Author: Simon Willnauer <simonw@apache.org>
Date: Thu Aug 20 00:10:07 2015 +0200
fix tests to not mix local transport and zen unicast disco
commit 539f6ca6e5137e0d496239adc8684688dedcc824
Author: Simon Willnauer <simonw@apache.org>
Date: Thu Aug 20 00:02:01 2015 +0200
fix tests to not mix local transport and zen unicast disco
commit 004c2881b25467f332acc8c9f9e92b1f0f9d314e
Author: Robert Muir <rmuir@apache.org>
Date: Wed Aug 19 17:51:45 2015 -0400
Fix multinode
commit 54113af325ce31571811c49fdaae89d5687be4ba
Author: Robert Muir <rmuir@apache.org>
Date: Wed Aug 19 17:36:45 2015 -0400
fix integration tests
commit 0156a77a56319d6b9737ec6a531992052e50bd59
Author: Simon Willnauer <simonw@apache.org>
Date: Wed Aug 19 23:32:18 2015 +0200
enable multicast in MulticastZenPingIT.java
commit 1791caa35da853ce0122485fa3fd4674c671ec6e
Author: Robert Muir <rmuir@apache.org>
Date: Wed Aug 19 17:23:16 2015 -0400
Fix constant
commit 22820b53e0b2dc9fd47145c2bc29ce912a8fd484
Author: Simon Willnauer <simonw@apache.org>
Date: Wed Aug 19 22:59:09 2015 +0200
give it some extra ids for local transport crazyness
commit b2138fafa94a8a085813fd48356df63e57ade5b3
Author: Simon Willnauer <simonw@apache.org>
Date: Wed Aug 19 22:51:42 2015 +0200
pass on local addresses from configured transport rather than hard code IP addresses
commit 1bf5de1f457b081e0ce262b57d2b55d39c434156
Author: Simon Willnauer <simonw@apache.org>
Date: Wed Aug 19 22:04:31 2015 +0200
fix PluggableTransportModuleIT.java to use local disco and detach port limit for node local disco
commit b6706eddfa04c43947c16551359ae98a463d34aa
Author: Robert Muir <rmuir@apache.org>
Date: Wed Aug 19 14:16:03 2015 -0400
Default to unicast discovery, with default host list of 127.0.0.1, [::1]
When elasticsearch is configured by interface (or default: loopback interfaces),
bind to all addresses on the interface rather than an arbitrary one.
If the publish address is not specified, default it from the bound addresses
based on the following sort ordering:
* ipv4/ipv6 (java.net.preferIPv4Stack, defaults to true)
* ordinary addresses
* site-local addresses
* link local addresses
* loopback addresses
One one address is published, and multicast is still always over ipv4: these
need to be future improvements.
Closes#12906Closes#12915
Squashed commit of the following:
commit 7e60833312f329a5749f9a256b9c1331a956d98f
Author: Robert Muir <rmuir@apache.org>
Date: Mon Aug 17 14:45:33 2015 -0400
fix java 7 compilation oops
commit c7b9f3a42058beb061b05c6dd67fd91477fd258a
Author: Robert Muir <rmuir@apache.org>
Date: Mon Aug 17 14:24:16 2015 -0400
Cleanup/fix logic around custom resolvers
commit bd7065f1936e14a29c9eb8fe4ecab0ce512ac08e
Author: Robert Muir <rmuir@apache.org>
Date: Mon Aug 17 13:29:42 2015 -0400
Add some unit tests for utility methods
commit 0faf71cb0ee9a45462d58af3d1bf214e8a79347c
Author: Robert Muir <rmuir@apache.org>
Date: Mon Aug 17 12:11:48 2015 -0400
localhost all the way down
commit e198bb2bc0d1673288b96e07e6e6ad842179978c
Merge: b55d092 b93a75f
Author: Robert Muir <rmuir@apache.org>
Date: Mon Aug 17 12:05:02 2015 -0400
Merge branch 'master' into network_cleanup
commit b55d092811d7832bae579c5586e171e9cc1ebe9d
Author: Robert Muir <rmuir@apache.org>
Date: Mon Aug 17 12:03:03 2015 -0400
fix docs, fix another bug in multicast (publish host = bad here!)
commit 88c462eb302b30a82585f95413927a5cbb7d54c4
Author: Robert Muir <rmuir@apache.org>
Date: Mon Aug 17 11:50:49 2015 -0400
remove nocommit
commit 89547d7b10d68b23d7f24362e1f4782f5e1ca03c
Author: Robert Muir <rmuir@apache.org>
Date: Mon Aug 17 11:49:35 2015 -0400
fix http too
commit 9b9413aca8a3f6397b5031831f910791b685e5be
Author: Robert Muir <rmuir@apache.org>
Date: Mon Aug 17 11:06:02 2015 -0400
Fix transport / interface code
Next up: multicast and then http
* Centralised plugin docs in docs/plugins/
* Moved integrations into same docs
* Moved community clients into the clients section of the docs
* Removed docs/community
Closes#11734Closes#11724Closes#11636Closes#11635Closes#11632Closes#11630Closes#12046Closes#12438Closes#12579
This commit updates the Zen Discovery documentation to explain which
nodes partcipate in master election (by default) as well as the
configuration parameters for controlling this.
Closes#12727
Today this is "unofficial" as conf/scripts, but some people
want to share scripts across different nodes and so on. Because
they cannot configure it, they are forced to use dirty hacks
like symbolic links, which isnt going to work: we aren't going
to recursively scan conf/ and add permissions to all link targets
underneath it, thats crazy.
I really hate adding yet another configuration knob here, but
users resorting to using symlinks are going to be frustrated,
and do things in a more insecure way.
The release and smoke test python scripts used to install
plugins in the old fashion.
Also the BATS testing suite installed/removed plugins in that
way. Here the marvel tests have been removed, as marvel currently
does not work with the master branch.
In addition documentation has been updated as well, where it was
still missing.
In order to unify the handling and reuse the CLITool infrastructure
the plugin manager should make use of this as well.
This obsolets the -i and --install options but requires the user
to use `install` as the first argument of the CLI.
This is basically just a port of the existing functionality, which
is also the reason why this is not a refactoring of the plugin manager,
which will come in a separate commit.
During master election each node pings in order to discover other nodes and validate the liveness of existing nodes. Based on this information the node either discovers an existing master or, if enough nodes are found (based on `discovery.zen.minimum_master_nodes>>) a new master will be elected.
Currently, the node that is elected as master will currently update it the cluster state to indicate the result of the election. Other nodes will submit a join request to the newly elected master node. Instead of immediately processing the election result, the elected master
node should wait for the incoming joins from other nodes, thus validating the elections result is properly applied. As soon as enough nodes have sent their joins request (based on the `minimum_master_nodes` settings) the cluster state is modified.
Note that if `minimum_master_nodes` is not set, this change has no effect.
Closes#12161
Require urls for URL repository to be listed in repositories.url.allowed_urls setting. This change ensures that only authorized URLs can be accessed by elasticsearch
Plugin Manager can now use another simplified form when a user wants to install an official plugin hosted at elasticsearch download service.
The form we use is:
```sh
bin/plugin install pluginname
```
As plugins share now the same version as elasticsearch, we can automatically guess what is the exact current version of the plugin manager script.
Also, download service will now use `/org.elasticsearch.plugins/pluginName/pluginName-version.zip` URL path to download a plugin.
If the older form is provided (`user/plugin/version` or `user/plugin`), we will still use:
* elasticsearch download service at `/user/plugin/plugin-version.zip`
* maven central with groupIp=user, artifactId=plugin and version=version
* github with user=user, repoName=plugin and tag=version
* github with user=user, repoName=plugin and branch=master if no version is set
Note that community plugin providers can use other download services by using `--url` option.
If you try to use the new form with a non core elasticsearch plugin, the plugin manager will reject
it and will give you all known core plugins.
```
Usage:
-u, --url [plugin location] : Set exact URL to download the plugin from
-i, --install [plugin name] : Downloads and installs listed plugins [*]
-t, --timeout [duration] : Timeout setting: 30s, 1m, 1h... (infinite by default)
-r, --remove [plugin name] : Removes listed plugins
-l, --list : List installed plugins
-v, --verbose : Prints verbose messages
-s, --silent : Run in silent mode
-h, --help : Prints this help message
[*] Plugin name could be:
elasticsearch-plugin-name for Elasticsearch 2.0 Core plugin (download from download.elastic.co)
elasticsearch/plugin/version for elasticsearch commercial plugins (download from download.elastic.co)
groupId/artifactId/version for community plugins (download from maven central or oss sonatype)
username/repository for site plugins (download from github master)
Elasticsearch Core plugins:
- elasticsearch-analysis-icu
- elasticsearch-analysis-kuromoji
- elasticsearch-analysis-phonetic
- elasticsearch-analysis-smartcn
- elasticsearch-analysis-stempel
- elasticsearch-cloud-aws
- elasticsearch-cloud-azure
- elasticsearch-cloud-gce
- elasticsearch-delete-by-query
- elasticsearch-lang-javascript
- elasticsearch-lang-python
```
In order to be more consistent with what they do, the query cache has been
renamed to request cache and the filter cache has been renamed to query
cache.
A known issue is that package/logger names do no longer match settings names,
please speak up if you think this is an issue.
Here are the settings for which I kept backward compatibility. Note that they
are a bit different from what was discussed on #11569 but putting `cache` before
the name of what is cached has the benefit of making these settings consistent
with the fielddata cache whose size is configured by
`indices.fielddata.cache.size`:
* index.cache.query.enable -> index.requests.cache.enable
* indices.cache.query.size -> indices.requests.cache.size
* indices.cache.filter.size -> indices.queries.cache.size
Close#11569
Today, we disable CORS by default, but if a user simply enables CORS their instance of
elasticsearch will allow cross origin requests from anywhere, as the default value for allowed
origins is `*`.
This changes the default to be `null` so that no origins are allowed and the user must explicitly
specify the origins they wish to allow requests from. The documentation also mentions that there
is a security risk in using `*` as the value.
Closes#11169
Information about in-progress snapshot and restore processes is not really metadata and should be represented as a part of the cluster state similar to discovery nodes, routing table, and cluster blocks. Since in-progress snapshot and restore information is no longer part of metadata, this refactoring also enables us to handle cluster blocks in more consistent manner and allow creation of snapshots of a read-only cluster.
Closes#8102
While we had initially planned to keep rivers around in 2.0 to ease migration,
keeping support for rivers is challenging as it conflicts with other important
changes that we want to bring to 2.0 like synchronous dynamic mappings updates.
Nothing impossible to fix, but it would increase the complexity of how we
deal with dynamic mappings updates and manage rivers, while handling dynamic
mappings updates correctly is important for resiliency and rivers are on the go.
So removing rivers in 2.0 may well be a better trade-off.
The ResourceWatcher used settings prefixed `watcher.`, which
potentially could clash with the watcher plugin.
In order to prevent confusion, the settings have been renamed to
`resource.reload` prefixes.
This also uses the deprecation logging infrastructure introduced
in #11033 to log deprecated settings and their alternative at
startup.
Closes#11175
This change unifies the way scripts and templates are specified for all instances in the codebase. It builds on the Script class added previously and adds request building and parsing support as well as the ability to transfer script objects between nodes. It also adds a Template class which aims to provide the same functionality for template APIs
Closes#11091
Added infrastructure to allow basic member methods in the expressions
language to be called. The methods must have a signature with no arguments. Also
added the following member methods for date fields (and it should be easy to add more)
* getYear
* getMonth
* getDayOfMonth
* getHourOfDay
* getMinutes
* getSeconds
Allow fields to be accessed without using the member variable [value].
(Note that both ways can be used to access fields for back-compat.)
closes#10890
Groovy sandboxing was disabled by default from 1.4.3 on though since we found out that it could be worked around, so it makes little sense to keep it and maintain it.
Closes#10156Closes#10480
* Removed the docs for `index.compound_format` and `index.compound_on_flush` - these are expert settings which should probably be removed (see https://github.com/elastic/elasticsearch/issues/10778)
* Removed the docs for `index.index_concurrency` - another expert setting
* Labelled the segments verbose output as experimental
* Marked the `compression`, `precision_threshold` and `rehash` options as experimental in the cardinality and percentile aggs
* Improved the experimental text on `significant_terms`, `execution_hint` in the terms agg, and `terminate_after` param on count and search
* Removed the experimental flag on the `geobounds` agg
* Marked the settings in the `merge` and `store` modules as experimental, rather than the modules themselves
Closes#10782
* In code, we mark `River`, `AbstractRiverComponent`, `RiverComponent` and `RiverName` classes as deprecated
* We log that information when a cluster is still using it
* We add this information in the plugins list as well
Plugins can now define multiple operations/contexts that they use scripts for. Fine-grained settings can then be used to enable/disable scripts based on each single registered context.
Also added a new generic category called `plugin`, which will be used as a default when the context is not specified. This allows us to restore backwards compatibility for plugins on `ScriptService` by restoring the old methods that don't require the script context and making them internally use the `plugin` context, as they can only be called from plugins.
Closes#10347Closes#10419
Now that fine-grained script settings are supported (#10116) we can remove support for the script.disable_dynamic setting.
Same result as `script.disable_dynamic: false` can be obtained as follows:
```
script.inline: on
script.indexed: on
```
An exception is thrown at startup when the old setting is set, so we make sure we tell users they have to change it rather than ignoring the setting.
Closes#10286
Allow to on/off scripting based on their source (where they get loaded from), the operation that executes them and their language.
The settings cover the following combinations:
- mode: on, off, sandbox
- source: indexed, dynamic, file
- engine: groovy, expressions, mustache, etc
- operation: update, search, aggs, mapping
The following settings are supported for every engine:
script.engine.groovy.indexed.update: sandbox/on/off
script.engine.groovy.indexed.search: sandbox/on/off
script.engine.groovy.indexed.aggs: sandbox/on/off
script.engine.groovy.indexed.mapping: sandbox/on/off
script.engine.groovy.dynamic.update: sandbox/on/off
script.engine.groovy.dynamic.search: sandbox/on/off
script.engine.groovy.dynamic.aggs: sandbox/on/off
script.engine.groovy.dynamic.mapping: sandbox/on/off
script.engine.groovy.file.update: sandbox/on/off
script.engine.groovy.file.search: sandbox/on/off
script.engine.groovy.file.aggs: sandbox/on/off
script.engine.groovy.file.mapping: sandbox/on/off
For ease of use, the following more generic settings are supported too:
script.indexed: sandbox/on/off
script.dynamic: sandbox/on/off
script.file: sandbox/on/off
script.update: sandbox/on/off
script.search: sandbox/on/off
script.aggs: sandbox/on/off
script.mapping: sandbox/on/off
These will be used to calculate the more specific settings, using the stricter setting of each combination. Operation based settings have precedence over conflicting source based ones.
Note that the `mustache` engine is affected by generic settings applied to any language, while native scripts aren't as they are static by definition.
Also, the previous `script.disable_dynamic` setting can now be deprecated.
Closes#6418Closes#10116Closes#10274
Adds a setting to disable detailed error messages and full exception stack traces
in HTTP responses. When set to false, the error_trace request parameter will result
in a HTTP 400 response. When the error_trace parameter is not present, the message
of the first ElasticsearchException will be output and no nested exception messages
will be output.
The request tracer logs in TRACE level under the `transport.tracer` log and is dynamically configurable with include and exclude arrays to filter out unneeded info. By default all requests are logged with the exception of fault detection pings (fired every second).
add the notion of tracers in the MockTransportService for testing purposes
Closes#9286
Together with #8782 it should help in the situations simliar to #8887 by adding an ability to get information about currently running snapshot without accessing the repository itself.
Closes#8887
We only have a single gatweway since es 1.3. There is no need to keep all
these abstractsion and nested packages. We can fold most of it into simpler
structures.
This change adds a 'http.publish_port' setting to the HTTP module to configure
the port which HTTP clients should use when communicating with the node. This
is useful when running on a bridged network interface or when running behind
a proxy or firewall.
Closes#8807Closes#8137
Always use the LocalGateway* equivalents
We already check in the LocalGateway whether a node is a client node, or
is not master-eligible, and skip writing the state there. This allows us
to remove this code that was previously used only for tribe nodes (which
are not master eligible anyway and wouldn't write state) and in
tests (which can shake more bugs out)
This adds HTTP pipelining support to netty. Previously pipelining was not
supported due to the asynchronous nature of elasticsearch. The first request
that was returned by Elasticsearch, was returned as first response,
regardless of the correct order.
The solution to this problem is to add a handler to the netty pipeline
that maintains an ordered list and thus orders the responses before
returning them to the client. This means, we will always have some state
on the server side and also requires some memory in order to keep the
responses there.
Pipelining is enabled by default, but can be configured by setting the
http.pipelining property to true|false. In addition the maximum size of
the event queue can be configured.
The initial netty handler is copied from this repo
https://github.com/typesafehub/netty-http-pipeliningCloses#2665
This commit adds the ability to enable / disable relocations
on an entire cluster or on individual indices for either:
* `primaries` - only primaries can rebalance
* `replica` - only replicas can rebalance
* `all` - everything can rebalance (default)
* `none` - all rebalances are disabled
similar to the allocation enable / disable functionality.
Relates to #7288
This patch allows to create several netty bootstrap, each of which
listening on different ports. This will potentially allow for features
to listen to different network interfaces for node-to-node or node-to-client
communication and is also the base to listen to several interfaces, so that those
can be used to speed up cluster communication in the future.
Closes#8098
Today, when executing an action (mainly when using the Java API), a listener threaded flag can be set to true in order to execute the listener on a different thread pool. Today, this thread pool is the generic thread pool, which is cached. This can create problems for Java clients (mainly) around potential thread explosion.
Introduce a new thread pool called listener, that is fixed sized and defaults to the half the cores maxed at 10, and use it where listeners are executed.
relates to #5152closes#7837
BlobContainer used to provide async APIs which are not used
internally. The implementation of these APIs are also not async
by nature and neither is any of the pluggable BlobContainers. This
commit simplifies the API to a simple input / output stream and
reduces the hierarchy of BlobContainer dramatically.
NOTE: This is a breaking change!
Closes#7551
This adds support to return the "Access-Control-Allow-Credentials" header
if needed, so CORS will work flawlessly with authenticated applications.
Closes#6380
Allow to set the value default to network.tcp.no_delay and network.tcp.keep_alive so they won't be set at all, since on solaris, setting tcpNoDelay can actually cause failure
relates to #7115
This commit adds regular expression support for the allow-origin
header depending on the value of the request `Origin` header.
The existing HttpRequestBuilder is also extended to support the
OPTIONS HTTP method.
Relates #5601Closes#6891
These are javascript expressions, which can only access numeric
fielddata, parameters, and _score. They can only be used for searches (not document updates).
closes#6818
The `recovery_after_time` tells the gateway to wait before starting recovery from disk. The goal here is to allow for more nodes to join the cluster and thus not start potentially unneeded replications. The `expectedNodes` setting (and friends) tells the gateway when it can start recovering even if the `recover_after_time` has not yet elapsed. However, `expectedNodes` is useless if one doesn't set `recovery_after_time`. This commit changes that by setting a sensible default of 5m for `recover_after_time` *if* a `expectedNodes` setting is present.
Closes#6742
When a node sends a join request to the master, only send back the response after it has been added to the master cluster state and published.
This will fix the rare cases where today, a join request can return, and the master, since its under load, have not yet added the node to its cluster state, and the node that joined will start a fault detect against the master, failing since its not part of the cluster state.
Since now the join request is longer, also increase the join request timeout default.
closes#6480
Using ping.timeout, which defaults to 3s, to use as a timeout value on the join request a node makes to the master once its discovered can be too small, specifically when there is a large cluster state involved (and by definition, all the buffers and such on the nio layer will be "cold"). Introduce a dedicated join.timeout setting, that by default is 10x the ping.timeout (so 30s by default).
closes#6342
This change adds a new cluster state that waits for the replication of a shard to finish before starting snapshotting process. Because this change adds a new snapshot state, an pre-1.2.0 nodes will not be able to join the 1.2.0 cluster that is currently running snapshot/restore operation.
Closes#5531
* If plugin does not provide `lucene` property, we consider that the plugin is compatible.
* If plugin provides `lucene` property, we try to load related Enum org.apache.lucene.util.Version. If this fails, it means that the node is too "old" comparing to the Lucene version the plugin was built for.
* We compare then two first digits of current node lucene version against two first digits of plugin Lucene version. If not equal, it means that the plugin is too "old" for the current node.
Plugin developers who wants to launch plugin check only have to add a `lucene` property in `es-plugin.properties` file. If you are using maven to build your plugin, you can do it like this:
In `pom.xml`:
```xml
<properties>
<lucene.version>4.6.0</lucene.version>
</properties>
<build>
<resources>
<resource>
<directory>src/main/resources</directory>
<filtering>true</filtering>
</resource>
</resources>
</build>
```
In `es-plugin.properties`, add:
```properties
lucene=${lucene.version}
```
BTW, if you don't already have it, you can add the plugin version as well:
```properties
version=${project.version}
```
You can disable that check using `plugins.check_lucene: false`.
The current setting of 20MB/sec seems to be too conservative given
the capabilities of modern hardware / network throughput.
A 50MB default should provide better out of the box performance.
The current setting of 20MB/sec seems to be too conservative given
the capabilities of modern hardware. Even on cloud infrastructure this
seems to be too lowish. A 50MB default should provide better out of the box
performance
allow to configure on the index level which blocks can optionally be applied using tribe.blocks.indices prefix settings.
allow to control what will be done when a conflict is detected on index names coming from several clusters using the tribe.on_conflict setting. Defaults remains "any", but now support also "drop" and "prefer_[tribeName]".
closes#5501
Removed unused misc.asciidoc file
Added plugins directory to directory layout
Fixed transport.tcp.connect_timeout value to match the code found in NetworkService.TcpSettings
Clarified that phrase query does not preserve order of terms
Clarified merge page
Added instructions on how to build documentation to docs/README
Fixes#4701. Changes behavior of the snapshot operation. The operation now fails if not all primary shards are available at the beginning of the snapshot operation. The restore operation no longer tries to restore indices with shards that failed or were missing during snapshot operation.
`allocation.disable_new_allocation`, `allocation.disable_allocation`, `allocation.disable_replica_allocation`,
in favour for the enable allocation decider which has a single option `allocation.enable` wich can be set to the following values:
`none`, `new_primaries`, `primaries` and `all` (default).
Closes#4488
* Clean up s/ElasticSearch/Elasticsearch on docs/*
* Clean up s/ElasticSearch/Elasticsearch on src/* bin/* & pom.xml
* Clean up s/ElasticSearch/Elasticsearch on NOTICE.txt and README.textile
Closes#4634
When testing plugin manager with real downloads, it could happen that the test run forever. Fortunately, test suite will be interrupted after 20 minutes, but it could be useful not to fail the whole test suite but only warn in that case.
By default, plugin manager still wait indefinitely but it can be modified using new `--timeout` option:
```sh
bin/plugin --install elasticsearch/kibana --timeout 30s
bin/plugin --install elasticsearch/kibana --timeout 1h
```
Closes#4603.
Closes#4600.
* `ignore_unavailable` - Controls whether to ignore if any specified indices are unavailable, this includes indices that don't exist or closed indices. Either `true` or `false` can be specified.
* `allow_no_indices` - Controls whether to fail if a wildcard indices expressions results into no concrete indices. Either `true` or `false` can be specified. For example if the wildcard expression `foo*` is specified and no indices are available that start with `foo` then depending on this setting the request will fail. This setting is also applicable when `_all`, `*` or no index has been specified.
* `expand_wildcards` - Controls to what kind of concrete indices wildcard indices expression expand to. If `open` is specified then the wildcard expression if expanded to only open indices and if `closed` is specified then the wildcard expression if expanded only to closed indices. Also both values (`open,closed`) can be specified to expand to all indices.
Closes to #4436
Now that we properly fixed the ability to set the queue size on the index / bulk thread pool, we should actually set them to a somehow reasonable value to protect from users potentially overflowing our system.
I suggest defaults to be 50 for bulk, and 200 for indexing.
Also, set the thread pool for get, which we should set (in a similar value to a "read" queue size we have today).
closes#3888
Add a dedicated suggest thread pool for the suggest API. With the new completion suggest type, which is purely CPU bounded, it makes more sense to have a dedicated thread pool for suggest compared to having it share the search thread pool and "competing" against other search operations.
closes#3698
Now with have proper exit codes for elasticsearch plugin manager (see #3463), we can add a silent mode to plugin manager.
```sh
bin/plugin --install karmi/elasticsearch-paramedic --silent
```
Closes#3628.
When installing a plugin, we use:
```sh
bin/plugin --install groupid/artifactid/version
```
But when removing the plugin, we only support:
```sh
bin/plugin --remove dirname
```
where `dirname` is the directory name of the plugin under `/plugins` dir.
Closes#3421.
Vector241-Eric
Lee Hinman
Clinton Gormley
David Pilato
gaelL
Simon Willnauer
Dongjoon Hyun
Jason Tedor
Chris Earle
Yannick Welsch
Nick
Michael McCandless
Robert Muir
Gao Yingkai
Xu Zhang
Jason O'Donnell
Pius
Nik Everett
Alexander Reelsen
Boaz Leskes
Masaru Hasegawa
Igor Motov
Ryan Ernst
Jason Tedor
kakakakakku
Martijn van Groningen
Shaunak Kashyap
Jay Modi
johnfrederik
jaymode
Adrien Grand
Mark Walkom
Colin Goodheart-Smithe
javanna
Pascal Borreli
Jack Conradson
minde-eagleeye
Alexander
Dustin Shiver
Tanguy Leroux
David Wittman
Patrick Peschlow
Glen Smith
Petr Bela
Pius
IsaacHaze
J Charitopoulos
Christian Verkerk
Peter Johnson a.k.a. insertcoffee
Peter Fabian Mitchell
Matt Hughes
Laurent Broudoux
Mariam Hakobyan
Mark Walkom
Veres Lajos
Peter Dyson
Josh Kuhn
Paul Pearcy
Shay Banon
Zachary Wasserman
ansj
Carsten Brandt
Jun Ohtani
gabriel-tessier
rendel
Brian Murphy
Peter Kim
Iulia Pasov
Shinsuke Sugaya
Shikhar Bhushan
Volker Fröhlich
Gaurav Arora
salyh
Itamar Syn-Hershko
violuke
Xiao Yu
Costin Leau
wittyameta
Alex Brasetvik
Florian Schilling
Justin Etheredge
Konrad Feldmeier
Kevin
Mihnea Dobrescu-Balaur
Brusic
Andy Goldstein
Britta Weber
Ben McCann