The message can be improved by removing the unneeded ‘the’ (x2).
Before:
Angular is running in the development mode. Call enableProdMode() to enable the production mode.
After:
Angular is running in development mode. Call enableProdMode() to enable production mode.
Closes#36570
PR Close#36571
All migration guides did not have a direct link to access them so added them to the side nav in the section updating to version 9 for direct access, it also helps to add right side nav to these migration guides
Fixes#33582
PR Close#34979
Clicking on a link may take us to an extenal source, which may lead to user leaving angular.io unintentionally.
Added visual cues on external links so that user knows which links are external and which are intenal to angular.io.
Fixes#17620
PR Close#36601
With this change we add FireFox Extended Support Release (ESR) to the list of supported browsers. The ESR latest version is used mainly in corporate environments (intranet applications, etc.) due to its support and stability guarantees.
PR Close#36973
In resource.model.ts the interfaces of the resources were defined as classes, these do not use any class properties and are only used for type checking. So, changed them from class to interface.
PR Close#36958
While creating the new tutorial section, I hit o instead of i when
typing the word 'tooltip.' This is understandable, as they are right
next to each other on the keyboard. I might move to the Dvorak
keyboard layout to avoid such errors in the future.
PR Close#36955
change to aot docs to include changes after angular 9
aot is true for new applications created, also it will
be updated to aot true once app is updated using ng update
PR Close#35487
Abstract directives cannot be part of a `@NgModule`, but the AIO dgeni
setup currently enforces this. This commit updates the logic so that
abstract directives are skipped.
PR Close#36921
In v9, we deprecated the use of ModuleWithProviders
without a generic. In v10, we will be requiring the
generic when using ModuleWithProviders. You can read
more about the reasoning behind this change in the
migration guide:
http://v9.angular.io/guide/migration-module-with-providers
PR Close#36892
This patch is the first of many commits to disable sanitization for
[stlye.prop] and [style] bindings in Angular.
Historically, style-based sanitization has only been required for old
IE browsers (IE6 and IE7). Since Angular does not support these old
browsers at all, there is no reason for the framework to support
style-based sanitization.
PR Close#35621
We stopped publishing @angular/http to npm a while back (v7?), so from the perspective of our
customer @angular/http has been removed a long time ago and mentioninig it now that we actually
removed the code from our repo is just confusing.
PR Close#36944
esm5 and fesm5 are no longer needed and have been deprecated in the past.
https://v9.angular.io/guide/deprecations#esm5-and-fesm5-code-formats-in-angular-npm-packages
This commit modifies ng_package to no longer distribute these two formats in npm packages
built by ng_package (e.g. @angular/core).
This commit intentionally doesn't fully clean up the ng_package rule to remove all traces of esm5 and fems5
build artifacts as that is a bigger cleanup and currently we are narrowing down the scope of this change
to the MVP needed for v10, which in this case is 'do not put esm5 and fesm5' into the npm packages.
More cleanup to follow: https://angular-team.atlassian.net/browse/FW-2143
BREAKING CHANGE: esm5 and fesm5 format is no longer distributed in
Angular's npm packages e.g. @angular/core
If you are not using Angular CLI to build your application or library,
and you need to be able to build es5 artifacts, then you will need to
downlevel the distributed Angular code to es5 on your own.
Angular CLI will automatically downlevel the code to es5 if differential
loading is enabled in the Angular project, so no action is required from
Angular CLI users.
PR Close#36944
The purpose of the `WrappedValue` is to allow same object instance to be treated as different for the purposes of change detection. It is currently used with `async` pipe and only with `Observables`. The use case which it covers is if the `Observable` produces the same instance of the value but it is desirable to still try to mark it as changed for the purposes of change detection.
We believe tha the above use case is too rare to warrant special handling in the framework. (Having special handling causes application slowdown for the users and mental load for the developers.) No replacement is planned for this deprecation.
PR Close#36819
Previously, some preview server tests were only running for public
builds. In the past, these tests were run for both public and non-public
builds. The non-public builds tests were disabled in #23576, probably
during debugging some failure.
This commit fixes it by ensuring the tests are run for both public and
non-public builds.
PR Close#36837
The test was introduced in #23576, but the behavior the test was
verifying does not match the actual behavior of
`BuildCleaner#getOpenPrNumbers()`.
The reason that the test did not fail is that the verification happened
asynchronously, but the test completed synchronously (by accident).
PR Close#36837
Previously, when the preview server `build-cleanup` script failed, the
error was logged but not reflected to the commands exit code. This seems
to have been accidentally broken in #23576.
This commit fixes it by ensuring the error is re-thrown from the
`BuildCleaner#cleanUp()` method to allow the process to exit with an
error exit code.
PR Close#36837
Previously, the `dev` npm script in `aio/aio-builds-setup/scripts-js/`
(the PR preview server implementation) would run both linting and unit
tests. This was slow and delayed the feedback loop on each change.
Since the `dev` script should be run during development and give
feedback as fast as possible, this commit removes the linting from the
`dev` script and only keeps the unit tests. Linting is still run in the
`test` npm script (which is more comprehensive). Also, in most cases the
developer's IDE will show linting errors in real time in the editor.
PR Close#36837
Update the order in which the `update-preview-server.sh` script expects
its arguments (and the associated docs) to be consistent with the order
of arguments in other commands/docs (such as
`vm-setup--start-docker-container.md`).
PR Close#36837
I recently went through the process of setting up a preview server VM
again and updated the instructions and references based on the latest
docs for Debian, Docker, Google Compute Engine, etc.
PR Close#36837
Previously, in order to remain as deterministic as possible, the
Dockerfile for the preview server Docker image had all dependencies
pinned to specific versions. It turns out that some packages (such as
`nginx`, `nodejs`, and `openssl` - potentially others too) make older
versions unavailable on the repositories once a newer version is
available.
See for example:
- https://github.com/nodesource/distributions/issues/33
- https://askubuntu.com/questions/715104/how-can-i-downgrade-openssl-via-apt-get
This commit, therefore, removes the exact versions for these packages.
The latest versions will be installed everytime the Docker image is
built (subject to Docker caching).
PR Close#36837
In order to ease local development, self-signed SSL/TLS certificates are
created when building the preview server Docker image. These
certificates are valid for 365 days. Thus, it is possible for an old
certificate to be re-used past its expiration date due to Docker's
caching intermediate layers.
Previously, this would lead to hard-to-debug failures in the
`aio-health-check` and `aio-verify-setup` checks. Even after finding out
that the failures were caused by an expired certificate, it was not
obvious why that would be the case.
This commit adds an additional check to the `aio-health-check` command
that checks the certificates' expiration dates. This helps surface such
errors. It also prints a more helpful message, prompting the user to
build the Docker image with the `--no-cache` option to fix the problem
with self-signed certificates.
PR Close#36837
Previously, the preview server Docker image was based on Debian 9
(stretch).
This commit upgrades the preview server Docker image to Debian 10
(buster) and also upgrades all dependencies to latest versions
(including upgrading Node.js from v10 to v12).
(The GCE VM running the preview server Docker container was also
upgraded from Debian 9 to 10 on 2020-04-27.)
---
Other changes:
- Pinned the installed version of `curl` to make the `aio-health-check`
and `aio-verify-setup` checks (which use `curl`) more deterministic.
- Dropped the `*-backports` Debian repositories, since they are no
longer needed. The `*-backports` repositories were introduced in
593fe5ed25 to install `nginx` from, but
became obsolete in 2f1a862b83, which
switched to installing `nginx` from the regular repositories again.
- Added `vim` to the list of installed dependencies (for convenience
during debugging).
PR Close#36837
This commit upgrades all dependencies in `scripts-js/` to latest
versions and also includes all necessary code changes to ensure the
tests are passing with the new dependency versions.
PR Close#36837
Previously, using undecorated base classes and using
ModuleWithProviders without a generic were listed
as deprecated features.
In v10, these features will be removed and an error
will be thrown instead. This commit updates the
deprecation guide to reflect this change.
PR Close#36891
The index of the deprecation guide contains a list
of deprecated APIs and when they can be removed.
This commit updates the likely removal version for
APIs that were previously listed as v10, as we are
not removing them in this version.
PR Close#36891
Add documentation in the deprecations markdown file about the deprecation of IE 9 and 10.
Additionally, add note in browser support document about deprecation.
PR Close#36887
This commit also updates the projects to more closely match what a newly
generated app would look like with the exception of `tslint.json` files,
which would create too many linting failures. These will be updated in a
follow-up PR.
PR Close#36145
Update the Angular CLI and Angular framework packages to latest `@next`
versions. Also, update the app to look more closely to how a newly
generated app with the latest CLI would look like.
PR Close#36145
This change aligns behavior for resolvers which return EMPTY. Currently EMPTY resolvers have inconsistent behavior:
- One resolver that returns EMPTY => won't navigate and just ends on ResolveStart router event.
- Two resolvers where both return EMPTY => throws "Error: Uncaught (in promise): EmptyError: no elements in sequence"
- Two resolvers where one returns a value and the other one returns EMPTY => Navigates successfully.
With this change any EMPTY resolver will cancel navigation.
BREAKING CHANGE: Any resolver which return EMPTY will cancel navigation.
If you want to allow the navigation to continue, you will need to update the resolvers to emit
some value, (i.e. defaultIfEmpty(...), of(...), etc).
PR Close#24195
PR Close#24621
Previously it was not possible to provide `CacheQueryOptions` ([MDN](https://developer.mozilla.org/en-US/docs/Web/API/Cache)) for querying the Cache.
This commit introduces a new parameter called `cacheQueryOptions` for `DataGroup` and `AssetGroup`.
Currently only `ignoreSearch` is supported as `ignoreVary` and `ignoreMethod` would require using
the complete Request object for matching which is not possible with the current implementation.
Closes#28443
PR Close#34663
Correct typo in the router docs, changing "as your app growns" to "as your app grows". Previously the wrong spelling was used and this commit rectifies this.
PR Close#36786
This change is part of a larger effort to migrate all golden type
tracking files to a single location. Additionally, this makes it
a bit easier to manage file ownership in pullapprove.
PR Close#36455
link is very deep down on architecture page this commit is part of a larger effort to standardise ownload sections on angular.io
This commit partially addresses #35459
PR Close#36565
link is very deep down on acessibility page this commit is part of a larger effort to standardise ownload sections on angular.io
This commit partially addresses #35459
PR Close#36561
Version 7.0.0 is under LTS until 18-4-2020 removed it from the table which showed it as LTS and added to versions that are no longer under support.
PR Close#36708
Previously, when a document included `_`, the autoLinker will try to
generate a link, e.g from `core/ɵComponentDef._`. This commit adds it
to the ignored words to prevent that.
PR Close#36316
Previously, the auto linker generated links without an `href` when the
API was private. This commit fixes this by making sure that the `path`
of the document is not empty.
Closes#36260
PR Close#36316
In "Getting started" guide pipes are not intoduced anywhere but are used in the guide.
Added refrence to pipes for better consistency in the tutorial.
Fixes#36375
PR Close#36584
This rewrite changes headings to focus on user tasks rather than features,
verifies that content is up-to-date and complete, removes colloquial phrases,
adds prerequisites, and expands on a task-based section in the beginning
(a quick reference).
PR Close#35566
In the past, server-side rendered apps needed to convert URLs used in
API requests to absolute when rendering on the server. Originally, this
was handled in the `universal` guide and corresponding example app by
modifying the `HeroService` to use `APP_BASE_HREF` to derive the
absolute URL.
In #28956, the guide was updated to show an improved method: Specifying
an `HttpInterceptor` that took care of converting the URLs to absolute.
That interceptor was only provided when rendering the app on the server.
By mistake, the corresponding example app was not updated along with the
guide.
Since `@nguniversal/*` v7.1.0, it is no longer necessary to convert the
URLs to absolute inside the app. This is handled in the `@nguniversal`
libs (see angular/universal#897).
This commit updates the example app to remove unnecessary code and
modifies the guide to mention the issue with absolute URLs, but explain
that developers only need to worry about it when not using one of the
`@nguniversal/*-engine` packages.
PR Close#36483
Previously, there were no tests for the `universal` docs example. This
meant that the project was not tested at all (not even ensuring that it
can be built successfully).
This commit adds e2e tests for the `universal` example (ported from
`toh-pt6` and cleaned up) and also verifies that the project can be
built successfully (including the server).
PR Close#36483
Previously, building the `universal` example failed with:
```
node_modules/@types/express/index.d.ts(90,50): error TS2694: Namespace '".../@types/express-serve-static-core/index"' has no exported member 'Params'.
node_modules/@types/express/index.d.ts(90,64): error TS2694: Namespace '".../@types/express-serve-static-core/index"' has no exported member 'ParamsDictionary'.
```
This commit fixes the error by upgrading
`@types/express-serve-static-core` to a newer version.
See DefinitelyTyped/DefinitelyTyped#40905 for more details.
PR Close#36483
As mentioned in the `universal` guide, the `toh-pt6` examples is the
starting poitn for the `universal` example. However, the two examples
had become out-of-sync, because some fixes/changes were made to the
Tour-of-Heroes examples.
This commit ports these changes to the `universal` example.
PR Close#36483
Previously, the `package.json` template used in the ZIP archive of the
`universal` example that we offer for download missed the `build` npm
script.
This commit updates the template for the `universal` docs example to
include the `build` npm script.
NOTE:
The `build` npm script is already included in
`aio/tools/examples/shared/boilerplate/universal/package.json`, but it
was removed by the example zipper.
PR Close#36483
On small screens (e.g. on mobile), the text on some of the buttons in
the About page was truncated. Changed the text size, margin and
padding so that the the whole text is visible on such screens (320px to
480px).
PR Close#36576
Previously, the `elements` docs example only worked in browsers that
natively supported Custom Elements and ES2015 modules. Furthermore, it
didn't work on StackBlitz, because StackBlitz ignores the specified
`target` in `tsconfig.json` and uses the UMD bundles (i.e. ES5 code)
even on browsers that do support ES2015.
(NOTE: In the past, this was not a problem, because we explicitly did
not provide a StackBlitz example. This has changed in #36067.)
This commit ensures the example works on all browsers and also on
StackBlitz by providing the necessary Custom Elements polyfills.
Fixes#36532
PR Close#36536
`fullTemplateTypeCheck` is no longer required since we now use `strictTemplates` which is a superset of the former option.
Follow-up on: 04f61c0c3e (r38354112)
PR Close#36502
there was a typo in _resourcess.scss file there was an extra comma added some spaces too that were needed for proper styling of the code
PR Close#35935
on small mobile screens the top tab bar contains text which was not visible on small screens changed text size, margin and padding so that the text could be contained in these screens (320px to 480px)
PR Close#35935
Currently destroy hooks are stored in memory as `[1, hook, 5, hook]` where
the numbers represent the index at which to find the context and `hook` is
the function to be invoked. This breaks down for `multi` providers,
because the value at the index will be an array of providers, resulting in
the hook being invoked with an array of all the multi provider values,
rather than the provider that was destroyed. In ViewEngine `ngOnDestroy`
wasn't being called for `multi` providers at all.
These changes fix the issue by changing the structure of the destroy hooks to `[1, hook, 5, [0, hook, 3, hook]]` where the indexes inside the inner array point to the provider inside of the multi provider array. Note that this is slightly different from the original design which called for the structure to be `[1, hook, 5, [hook, hook]`, because in the process of implementing it, I realized that we wouldn't get passing the correct context if only some of the `multi` providers have `ngOnDestroy` and others don't.
I've run the newly-added `view_destroy_hooks` benchmark against these changes and compared it to master. The difference seems to be insignificant (between 1% and 2% slower).
Fixes#35231.
PR Close#35840
Each docs example has an `example-config.json` configuration file. Among
other things, this file can be used to specify what commands to run in
order to test the example. (If not specified, the `run-example-e2e.js`
script will run a default `yarn e2e` command.)
Previously, the property specifying the test commands was called `e2e`.
This is because in the past only e2e tests were run for docs examples.
Since recently, some examples may specify commands for other types of
tests (such as unit tests). Therefore, calling the property that holds
the list of test commands `e2e` no longer makes sense and can be
misleading to people looking at the configuration files.
This commit renamed the property to the more generic `tests`. In the
future, the `run-example-e2e.js` script (and corresponding npm script)
should be renamed and refactored to also avoid giving the impression
that only e2e tests are run.
Discussed in:
https://github.com/angular/angular/pull/36143#discussion_r395148379
PR Close#36143
The `core-js` dependency is no longer included in `package.json` for
`cli`-type examples, but only for the `systemjs` ones. This commit
updates the `package.json` templates to reflect that (and also updates
the `npm-packages` guide accordingly).
PR Close#36143
Previously, only e2e tests were run for docs examples on CI. As a
result, unit tests (which are included in the zipped archives we provide
for users to download and play with the examples locally) were often
outdated and broken.
This commit configures specific docs examples that have meaningful unit
tests to run them on CI (via the `run-example-e2e.js` script). Where
necessary, the unit tests are fixed to ensure they pass and reflect the
changes in the corresponding component/service.
This commit also removes some auto-generated unit tests that are not
meaningful (e.g. make trivial assertions, such that a component instance
is truthy) and are often broken anyway (e.g. because the corresponding
component has been changed in ways that make the tests fail).
PR Close#36143
Previously, the download link to the example for the angular element
guide was in the middle of the page. To make it easier for the user to
find the download link, it has been placed to the top of the page.
This commit partially addresses #35459
PR Close#36067
Since the livestream for ng-conf is not public this year,
(and is only available to ng-conf attendees), we are
removing the link from the angular.io homepage.
Instead, we are now pointing to the ng-conf homepage for
more information.
PR Close#36382
Co-Authored-By: Igor Minar <iminar@google.com>
Updating the recommended defaults for template typechecking strictness to the most strict in order
to catch most of the errors at compile time.
See https://angular.io/guide/template-typecheck for more info.
PR Close#35628
In #35381, a new Protractor config file was introduced in docs examples,
`protractor-puppeteer.conf.js`, that was only supposed to be used on CI
and not be shipped with the ZIP archives provided for users to download
and experiment with the docs examples locally.
The logic to ignore the `protractor-puppeteer.conf.js` file was
incorrect, resulting in the file being retained in some examples (e.g.
[universal][1]). The problem was not immediately obvious, because most
examples explicitly specify all `**/*.js` files as ignored, but for
other examples the file was retained in the ZIP archive.
This commit fixes the logic to ensure the file is excluded from all docs
examples ZIP archives.
[1]: https://v9.angular.io/generated/zips/universal/universal.zip
PR Close#36018
The `removeSystemJsConfig` and `type` properties (present in some
`zipper.json` files) are now obsolete and are not taken into account by
the example zipper:
- `removeSystemJsConfig` is no longer relevant since most examples have
been migrated to use the CLI.
- `type` is no longer relevant, because the project type is determined
based on the `projectType` property in `example-config.json` files.
This commit removes these properties from `zipper.json` files and
updates the `example-zipper` docs to not mention them.
PR Close#36018
The `app-list-item` component sounds like it is used for a single
item, however it renders a list of items. There were also
several changes in the documentation, where it was becoming
confusing if the `app-list-item` is using a single item or multiple
items. This commit fixes this issue. It renames the component and its
respective properties to make sure that the intention is very clear.
Closes#35598
PR Close#35601
1. During reading the documentation I found some code examples that were refering to the class properties via methods, but without specifying the context `this`.
2. The 'onInvoke' hook was duplicated
3. A minor typo on `Zones and execution contexts` section
4. A minor typo on `Zones and async lifecycle hooks` section
PR Close#36138
Previously, all StackBlitz examples included the default dependencies
for `cli`-type projects. However, different example types may have
different `package.json` files with different dependencies.
For example, the [boilerplate `package.json`][1] for `elements` examples
includes an extra dependency on `@angular/elements`.
This commit changes `StackblitzBuilder` to use the dependencies that
correspond to each example type.
(NOTE: Manually verified the changes.)
Jira issue: [FW-2002][2]
[1]: https://github.com/angular/angular/blob/05d058622/aio/tools/examples/shared/boilerplate/elements/package.json
[2]: https://angular-team.atlassian.net/browse/FW-2002
PR Close#36071
The AOT compilation section of the `ngUpgrade` guide was
outdated/non-applicable. This commit hides the section to avoid confusion.
Fixing the section and re-introducing it is being tracked in #35989.
PR Close#36015
Previously, the `package.json` files added as boilerplate to docs
example projects of type `systemjs` were incorrect/outdated. They
contained unused dependencies and npm scripts and omitted used
dependencies.
This is not a big issue, because these examples are not offered as live
StackBlitz examples or downloadable ZIP archives, but having incorrect
`package.json` files is confusing and makes it more complicated to
update these examples.
This commit updates the `package.json` templates for the `systemjs` docs
examples and other configuration files to include used dependencies (and
remove unused ones). It also removes unused npm scripts.
PR Close#36015
Update dependencies.
Also, disable AOT tests for `systemjs`-type examples in Ivy mode,
because our current setup does not work with v9. See #35989 for details.
Fixes#34382Fixes#34383
PR Close#36015
Update `tsconfig[.*].json`.
Also, all make necessary changes to ensure the example apps can be
successfully built with the new, stricter type-checking options.
PR Close#36015
In the example apps used in the `ngUpgrade` guide, the AngularJS files
are loaded in `index.html` from `https://code.angularjs.org/`. Latest
browsers prevent loading the scripts from a page running on localhost
due to CORS:
```
Access to script at 'https://code.angularjs.org/1.5.5/angular.js' from origin
'http://localhost:9876' has been blocked by CORS policy: No 'Access-Control-Allow-Origin'
header is present on the requested resource.
```
NOTE:
Loading the files from `code.angularjs.org` is not mentioned in the
guide, therefore it is not needed to mention this config change there.
PR Close#36015
The `build` and `run` properties in `example-config.json` are only used
in example projects of type `systemjs`. In CLI-type projects, `build`
and `run` are ignored.
PR Close#36015
The `unittesting` property in `example-config.json` is a remnant of the
setup (before `aio/` was moved into the `angular/angular` repo) and has
no effect any more.
PR Close#36015
This has a couple benefits:
- we now use a .bazelversion file rather than package.json to pin the version of bazel we want. This means even if you install bazel on your computer rather than via yarn, you'll still get a warning if your bazel version is wrong.
- you no longer end up downloading three copies of bazel due to bugs in both npm and yarn where they download all tarballs before checking the metadata to see which are usable on the local platform.
- bazelisk correctly handles the tools/bazel trick for wrapping functionality, which we want to use to instrument developer build latencies
PR Close#36078
In version 9.1, this is no longer needed as in the CLI, NGCC async has been integrated which will run during `ng build/ng serve/ng test`.
Reference: TOOL-1340
PR Close#36049
This commit merges the two `.api-body` style blocks, removing duplicate
styles and re-ordering sub-blocks (to group relevant styles together).
It should not affect styling.
PR Close#31574
In some cases, we want to test the AIO app or docs examples against the
locally built Angular packages (for example to ensure that the changes
in a commit do not introduce a breaking change). In order to achieve
this, we have the `ng-packages-installer` script that handles updating
a project's `package.json` file to use the locally built Angular
packages (and appropriate versions for their (dev-/peer-)dependencies).
Previously, `ng-packages-installer` would only consider the locally
built Angular packages (from `dist/packages-dist/`). However, given that
Zone.js is now part of the `angular/angular` repo, it makes sense to
also use the locally built Zone.js package (from `dist/zone.js-dist/`).
Otherwise, the tests might fail for commits that update both the Angular
packages (and related docs examples) and the Zone.js package. An example
of such a simultaneous change (that would have broken tests) is #33838.
This commit updates the script to install the locally built Zone.js
package (in addition to the Angular ones). The commit ensures that the
Zone.js package will always be available alongside the Angular packages
(i.e. that the Zone.js package will be built by the same script that
builds the Angular packages and that the `dist/zone.js-dist/` directory
will be cached on CI).
Note: This problem was discovered while enabling docs examples unit
tests in #34374.
PR Close#35858
In pr #34978 colors were not properly set, if we type wrong url in the browser and we are directed to the 404 page there some text is set to white color which as not visible set it to dark gray for visibility
PR Close#35866
This reverts commit 7d832ae1001b6264bb7124086089e9e69c10c9b6; breaks CI
with error `Concurrent upstream jobs persisted the same file(s) into the workspace:`
PR Close#35857
In some cases, we want to test the AIO app or docs examples against the
locally built Angular packages (for example to ensure that the changes
in a commit do not introduce a breaking change). In order to achieve
this, we have the `ng-packages-installer` script that handles updating
a project's `package.json` file to use the locally built Angular
packages (and appropriate versions for their (dev-/peer-)dependencies).
Previously, `ng-packages-installer` would only consider the locally
built Angular packages (from `dist/packages-dist/`). However, given that
Zone.js is now part of the `angular/angular` repo, it makes sense to
also use the locally built Zone.js package (from `dist/zone.js-dist/`).
Otherwise, the tests might fail for commits that update both the Angular
packages (and related docs examples) and the Zone.js package. An example
of such a simultaneous change (that would have broken tests) is #33838.
This commit updates the script to install the locally built Zone.js
package (in addition to the Angular ones). The commit ensures that the
Zone.js package will always be available alongside the Angular packages
(i.e. that the Zone.js package will be built by the same script that
builds the Angular packages and that the `dist/zone.js-dist/` directory
will be cached on CI).
Note: This problem was discovered while enabling docs examples unit
tests in #34374.
PR Close#35780
Previously, `NgPackagesInstaller` would only look for Angular local
packages and do so by listing all (deeply nested) files in
`dist/packages-dist/` and looking for `package.json` files nested two
levels deep (i.e. `dist/packages-dist/*/package.json`). Thus, it would
unnecessarily check a large number of files.
This commit changes the package detection logic to instead look for
a `package.json` file directly inside each subdirectory of
`dist/packages-dist/`, which speeds up the operation.
It also refactors the code to make it easier to look for packages in
other directories (besides `dist/packages-dist/`). This will be useful
in a subsequent commit to look for and use the locally built `zone.js`
package (from `dist/zone.js-dist/`).
PR Close#35780
This commit moves the build-related scripts
(`build-ivy-npm-packages.js`, `build-packages-dist.js` and
`package-builder.js`) to a dedicated directory to keep the `scripts/`
directory cleaner.
It also moves the logic for building the `zone.js` package to a separate
script, `zone-js-builder.js`, to make it re-usable. A subsequent commit
will use it to build the `zone.js` package when building the Ivy Angular
packages as well.
PR Close#35780
`TestBed.get()` has been [deprecated in v9][1], in favor of
`TestBed.inject()`. In ##32382, the HTTP guide wording has been updated
to mention `TestBed.inject()` instead of `TestBed.get()`, but the
associated code snippets (extracted from the `http` example) were not.
This commit updates the HTTP guide examples to also use
`TestBed.inject()`.
[1]: https://v9.angular.io/guide/deprecations#testingFixes#35609
PR Close#35777
In the `testing` guide, there is a section discussing configuring
`fakeAsync()` to handle more macro tasks (e.g.
`HTMLCanvasElement#toBlob()`).
Previously, the corresponding code snippets (some of which were
hard-coded in the guide) were incorrect/incomplete and the associated
tests were broken. This was discovered while enabling docs examples unit
tests in #34374.
This commit fixes the code snippets and associated tests and ensures the
examples used in the guide come from an example app (i.e. are not
hard-coded).
Note: The docs examples unit tests are currently not run on CI. This
will be fixed in #34374.
PR Close#35778
To understand the current sentence it requires to read it multiple times.
This fix should help developers to understand the sentence in a quicker way.
PR Close#35002
Prior to this patch, the `margin` and `padding` properties were not
detected properly by Firefox due to them being shorthand properties.
This patch ensures that both `margin` and `padding` are converted
read as `top right bottom left` in the event that the shorthand
property detection fails for auto-styling in Angular animations.
Fix#35463 (FW-1886)
PR Close#35701
Previously, when running the unit tests for aio on Windows, many 404s
are logged for images, resulting in progress logs being spread over
multiple lines. This commit fixes this by adding a `proxy` to point
the fake image to a real image within the `src` folder.
Closes#29775
PR Close#35741
Added additional links which can help user find the things they are
looking for when there are no search results (when searching or on a 404
page).
Note:
This commit increases the main bundle's payload size due to the extra
content of the `aio-search-results` component.
Fixes#31532
PR Close#34978
In #35702, the payload size limit for Ivy builds was bumped to account
for small incremental increases in recent PRs. The ViewEngine size has
also increased similarly (~500B), but it was not updated in #35702,
because its total increase was just below the 500B error threshold (by
6B).
This commit bumps the ViewEngine size limit too.
Note: Any investigation for the Ivy size increase (as a follow-up
to #35702) will most likely also apply to ViewEngine, since the size was
increased by the same amount.
PR Close#34978
This commit adds a new preprocessor to use `${@searchKeywords}`, allowing
the docs to use a list of custom search phrases that will be
prioritized over the keywords found in the content.
Closes#35449
PR Close#35539
This commit updates AIO payload size limit that is triggering a problem after merging 0bc35a71e2. That commit added some payload size, but all checks were "green" for the original PR (#34574), so it looks like it's an accumulated payload size increase from multiple changes. The goal of this commit is to bring the master branch back to "green" state.
PR Close#35702
Whenever cookies are disabled in the browser, `window.localStorage` is
not avaialable to the app (i.e. even trying to access
`window.localStorage` throws an error).
To avoid breaking the app, we use a no-op `Storage` implementation if
`window.localStorage` is not available.
(This is similar to #33829, but for `localStorage` instead of
`sessionStorage`.)
Fixes#35555
PR Close#35557
On API docs pages for Angular packages (e.g. https://angular.io/api/common), we show all primary and secondary entry-points. Following a link to one of the secondary entry-points (e.g. https://angular.io/api/common/http), navigates the docs page for the secondary entry-point, where it is incorrectly (and misleadingly) labelled as PACKAGE and not as an entry-point.
Implemented a new ENTRY-POINT label and add support for correctly differentiating between entry-points and packages.
Fixes#34081
PR Close#35427
Now Angular doesn't support add event listeners as passive very easily.
User needs to use `elem.addEventListener('scroll', listener, {passive: true});`
or implements their own EventManagerPlugin to do that.
Angular may finally support new template syntax to support passive event, for now,
this commit introduces a temp solution to allow user to define the passive event names
in zone.js configurations.
User can define a global varibale like this.
```
(window as any)['__zone_symbol__PASSIVE_EVENTS'] = ['scroll'];
```
to let all `scroll` event listeners passive.
PR Close#34503
Previously, the example in the `router` guide was not
preserving the query params after logging in.
This commit fixes this by using `navigate` instead of
using `navigateByUrl`, which ignores any properties in
the `NavigationExtras` that would change the provided URL.
Fixes 34917
PR Close#35176
Under View Engine's default (non-fullTemplateTypeCheck) checking, object and
array literals which appear in templates are treated as having type `any`.
This allows a number of patterns which would not otherwise compile, such as
indexing an object literal by a string:
```html
{{ {'a': 1, 'b': 2}[value] }}
```
(where `value` is `string`)
Ivy, meanwhile, has always inferred strong types for object literals, even
in its compatibility mode. This commit fixes the bug, and adds the
`strictLiteralTypes` flag to specifically control this inference. When the
flag is `false` (in compatibility mode), object and array literals receive
the `any` type.
PR Close#35462
The top-menu items have both a `title` and a `tooltip` property. The
`title` is used as text content, so there is little point in using it as
"tooltip" (via the HTMLElement's `title` property) too.
This commit switches to using the `tooltip` property to populate the
`title`. Note that in many cases, the `tooltip` property is derived from
`title` anyway (so there is no practical change in behavior in these
cases).
PR Close#33351
This commit updates AIO payload size limit that is triggering a problem after merging f95b8ce07e. That commit added some payload size, but all checks were "green" for the PR (https://github.com/angular/angular/pull/34481) after rebase that happened a couple hours before the merge, so this is an accumulated payload size increase from multiple changes. The goal of this commit is to bring the master and patch branches back to "green" state.
PR Close#35538
Before this change content queries with the `descendants: false` option, as implemented in ivy,
would not descendinto `<ng-container>` elements. This behaviour was different from the way the
View Engine worked. This change alligns ngIvy and VE behaviours when it comes to queries and the
`<ng-container>` elements and fixes a common bugs where a query target was placed inside the
`<ng-container>` element with a * directive on it.
Before:
```html
<needs-target>
<ng-container *ngIf="condition">
<div #target>...</div> <!-- this node would NOT match -->
</ng-container>
</needs-target>
```
After:
```html
<needs-target>
<ng-container *ngIf="condition">
<div #target>...</div> <!-- this node WILL match -->
</ng-container>
</needs-target>
```
Fixes#34768
PR Close#35384
Previously, when switching angular versions through the
version selector in the sidenav, the query and hash is lost.
The user has to manually navigate to the original location again.
This commit fixes this issue and preserves the query and hash
when navigating between different versions.
Closes#24495
PR Close#35318
Light house was reporting that 'Ensure text remains visible during webfont load' solution to this problem was adding &swap to the end of web fonts this leads to our first text showing before web-font download and improves the performance of site link to article: https://web.dev/font-display/\?utm_source\=lighthouse\&utm_medium\=lr
PR Close#35352
In #35049, integration and AIO tests were changed to use the browser
provided by `puppeteer` in tests. This commit switches the docs examples
tests to use the same setup.
IMPLEMENTATION NOTE:
The examples are used to create ZIP archives that docs users can
download to experiment with. Since we want the downloaded projects to
resemble an `@angular/cli` generated project, we do not want to affect
the project's Protractor configuration in order to use `puppeteer`.
To achieve this, a second Protractor configuration is created (which is
ignored when creating the ZIP archives) that extends the original one
and passes the approperiate arguments to use the browser provided by
`puppeteer`. This new configuration (`protractor-puppeteer.conf.js`) is
used when running the docs examples tests (on CI or locally during
development).
PR Close#35381
This is a follow-up to #35049 with a few minor fixes related to using
the browser provided by `puppeteer` to run tests. Included fixes:
- Make the `webdriver-manager-update.js` really portable. (Previously,
it needed to be run from the directory that contained the
`node_modules/` directory. Now, it can be executed from a subdirectory
and will correctly resolve dependencies.)
- Use the `puppeteer`-based setup in AIO unit and e2e tests to ensure
that the downloaded ChromeDriver version matches the browser version
used in tests.
- Use the `puppeteer`-based setup in the `aio_monitoring_stable` CI job
(as happens with `aio_monitoring_next`).
- Use the [recommended way][1] of getting the browser port when using
`puppeteer` with `lighthouse` and avoid hard-coding the remote
debugging port (to be able to handle multiple instances running
concurrently).
[1]: https://github.com/GoogleChrome/lighthouse/blame/51df179a0/docs/puppeteer.md#L49
PR Close#35381
- Fix minor typos in the Getting Started, Forms and AOT Compiler guide.
- Fix minor typo in the Tour of Heroes app.
- Fix coding styles in the Getting Started guide and the Tour of Heroes app
PR Close#35325
The update to Angular 9.0.0 appears to have lowered the main.js
file slightly, while the current master build of Angular appears
to have gone up slightly.
PR Close#35379
The previous range (^1.2.0) allowed the version 1.3.2 to be
installed which caused the ES2015 polyfills.js file to increase
in size unwantedly.
PR Close#35379
After the previous update to yarn.lock a problem surfaced
with the `mkdir-promise` package. The latest version of
dgeni-packages (0.28.3) fixes this problem.
PR Close#35379
This file had not been updated for some time and lots of
the dependencies have new versions.
This is actually necessary because (at least on OS/X) there
is a problem with `chokidar` and `fsevent` that is solved by
bumping the versions here.
PR Close#35379
Previously, the `deployment` section, was using the `firebase`
CLI to deploy the angular project into firebase. With the better
integration through the `fire` schematics, it is now easier to
deploy angular applications into firebase. This commit takes
care of this, by outlined the required steps for deployment.
Closes#35274
PR Close#35355
The message service was added in a section create message service but was impoted much before it removed those imports because they can be confusing
Fixes#35259
PR Close#35354
Previously, a section in the FAQ was not clear when discussing a
simple unit test. We also want to move away from question-based
sections. This commit clarified the confusing section and
changed all question-based sections.
Closes#35056
PR Close#35316
Removing for now, since the info is stale, and we need to determine how to adjust the schedule due to the unexpected and significant version 9 delay.
PR Close#34474
On home page, image size set to 400px, which make the page not render
properly on devices below the size of 400px width.
Also, when search results were scrolled, they interfered with the top
nav items. Added border at the top of the search results container so
that the results are not visible under the nav items during scrolling.
PR Close#35098
Footer links did not have enough space between them, so lighthouse was
reporting that tap targets are not appropriately sized. Added the
required 8px space between links.
Also updated the margin of group headers accordingly.
Fixes#34901
PR Close#35098
Because the animation completes in 2000ms, and browser.wait checks
every 100ms, there can be a race condition of if the final state has
actually been reached to read the color. By moving to 2101ms, we ensure
that we cheack after the 2000ms of the animation has completed.
PR Close#35089
https://angular.io/resources needs to be sturctured to be able to navigate to all resources with improved user experience. A lone scroll bar in this page will not help the reader a great deal in exploring the resources
Fixes#33526
PR Close#34756
The golang section was recently added to the deployment guide
but has been reported as returning errors, where it had previously
worked. After discussion and testing with
Stephen Fluin, we are removing this section because of
inconsistency in functionality.
PR Close#34099
This change changes the priority order of static styling.
Current priority:
```
(least priority)
- Static
- Component
- Directives
- Template
- Dynamic Binding
- Component
- Map/Interpolation
- Property
- Directives
- Map/Interpolation
- Property
- Template
- Map/Interpolation
- Property
(highest priority)
```
The issue with the above priority is this use case:
```
<div style="color: red;" directive-which-sets-color-blue>
```
In the above case the directive will win and the resulting color will be `blue`. However a small change of adding interpolation to the example like so. (Style interpolation is coming in https://github.com/angular/angular/pull/34202)
```
<div style="color: red; width: {{exp}}px" directive-which-sets-color-blue>
```
Changes the priority from static binding to interpolated binding which means now the resulting color is `red`. It is very surprising that adding an unrelated interpolation and style can change the `color` which was not changed. To fix that we need to make sure that the static values are associated with priority of the source (directive or template) where they were declared. The new resulting priority is:
```
(least priority)
- Component
- Static
- Map/Interpolation
- Property
- Directives
- Static
- Map/Interpolation
- Property
- Template
- Static
- Map/Interpolation
- Property
(highest priority)
```
PR Close#34938
In #35004, we started ignoring yarn's engines check for `yarn install`
in AIO's `test-production.sh` script to fix a failure in the
`aio_monitoring_stable` CI job. (See #35004 for details.)
It turns out that the version of yarn used on the stable branch (1.17.3)
`--ignore-engines` is needed on all yarn commands (including `yarn
run`). Thus, #35004 is not enough to fix the failures.
New example failure: https://circleci.com/gh/angular/angular/604341
This commit turns of the engines check for the whole
`aio_monitoring_stable` CI job to fix the failure and make the job more
robust.
PR Close#35033
There are different `DebugNode`/`DebugElement` implementations (and
associated helper functions) for ViewEngine and Ivy. Additionally, these
classes/functions, which are defined inside the `core` package, are
imported by the `platform-browser` package.
Previously, this code was not tree-shaken as expected in Ivy. #30130
partially addressed the issue, but only for the case where `core` and
`platform-browser` end up in the same closure after webpack's scope
hoisting. In cases where this is not the case, our webpack/terser based
tooling is not capable of tree-shaking it.
This commit fixes the problem, by ensuring that the code retained in Ivy
mode (due to the cross-package import) does not unnecessarily reference
`DebugNode`/`DebugElement`, allowing the code to be tree-shaken away.
This results in a 7.6KB reduction in the size of the main angular.io
bundle.
Jira issue: [FW-1802](https://angular-team.atlassian.net/browse/FW-1802)
PR Close#35003
In #34955, we switched to Node.js v12 on master and 9.0.x. This causes
the `aio_monitoring_job` CI job (which checks out files from the stable
branch; currently 8.2.x) to start failing yarn's engines check (since
the 8.2.x branch expects Node.js version <11).
Example failure: https://circleci.com/gh/angular/angular/602499
Since the job is expected to run with files from both the stable and the
master branches (and since the version of Node.js is not important
here), this commit uses the `--ignore-engines` option to prevent
failures due to Node.js version mismatch.
NOTE:
Typically, the stable and master branch are on the same Node.js version,
because related PRs land on both master and the patch branch. One
exception is during RC periods, when the stable branch is different than
the patch branch. These periods are usually short, but in the case of
9.0.0 the period has lasted several months causing the CI environments
between master and the stable branch to get significantly out-of-sync.
PR Close#35004
earlier p sigly was used to define a paragraph element which was not clear what we want to refer changed it to paragrapg element for better understanding
Fixes#34922
PR Close#34927
This update increases the main bundle by ~0.6KB
payload size snapshot:
456581 Jan 24 22:07 dist/main-es2015.38c39f92eab2fcc8c835.js
541321 Jan 24 22:06 dist/main-es5.38c39f92eab2fcc8c835.js
52487 Jan 24 22:05 dist/polyfills-es2015.b374ef3555a700a97add.js
146193 Jan 24 22:05 dist/polyfills-es5.c7dc569e6c646e42fade.js
2987 Jan 24 22:05 dist/runtime-es2015.29be4028399ae41ba25e.js
2981 Jan 24 22:05 dist/runtime-es5.29be4028399ae41ba25e.js
PR Close#34966
Previously we would write to class/style as strings `element.className` and `element.style.cssText`. Turns out that approach is good for initial render but not good for updates. Updates using this approach are problematic because we have to check to see if there was an out of bound write to style and than perform reconciliation. This also requires the browser to bring up CSS parser which is expensive.
Another problem with old approach is that we had to queue the DOM writes and flush them twice. Once on element advance instruction and once in `hostBindings`. The double flushing is expensive but it also means that a directive can observe that styles are not yet written (they are written after directive executes.)
The new approach uses `element.classList.add/remove` and `element.style.setProperty/removeProperty` API for updates only (it continues to use `element.className` and `element.style.cssText` for initial render as it is cheaper.) The other change is that the styling changes are applied immediately (no queueing). This means that it is the instruction which computes priority. In some circumstances it may result in intermediate writes which are than overwritten with new value. (This should be rare)
Overall this change deletes most of the previous code and replaces it with new simplified implement. The simplification results in code savings.
PR Close#34804
NOTE: This change must be reverted with previous deletes so that it code remains in build-able state.
This change deletes old styling code and replaces it with a simplified styling algorithm.
The mental model for the new algorithm is:
- Create a linked list of styling bindings in the order of priority. All styling bindings ere executed in compiled order and than a linked list of bindings is created in priority order.
- Flush the style bindings at the end of `advance()` instruction. This implies that there are two flush events. One at the end of template `advance` instruction in the template. Second one at the end of `hostBindings` `advance` instruction when processing host bindings (if any).
- Each binding instructions effectively updates the string to represent the string at that location. Because most of the bindings are additive, this is a cheap strategy in most cases. In rare cases the strategy requires removing tokens from the styling up to this point. (We expect that to be rare case)S Because, the bindings are presorted in the order of priority, it is safe to resume the processing of the concatenated string from the last change binding.
PR Close#34616
This change moves information from instructions to declarative position:
- `ɵɵallocHostVars(vars)` => `DirectiveDef.hostVars`
- `ɵɵelementHostAttrs(attrs)` => `DirectiveDef.hostAttrs`
When merging directives it is necessary to know about `hostVars` and `hostAttrs`. Before this change the information was stored in the `hostBindings` function. This was problematic, because in order to get to the information the `hostBindings` would have to be executed. In order for `hostBindings` to be executed the directives would have to be instantiated. This means that the directive instantiation would happen before we had knowledge about the `hostAttrs` and as a result the directive could observe in the constructor that not all of the `hostAttrs` have been applied. This further complicates the runtime as we have to apply `hostAttrs` in parts over many invocations.
`ɵɵallocHostVars` was unnecessarily complicated because it would have to update the `LView` (and Blueprint) while existing directives are already executing. By moving it out of `hostBindings` function we can access it statically and we can create correct `LView` (and Blueprint) in a single pass.
This change only changes how the instructions are generated, but does not change the runtime much. (We cheat by emulating the old behavior by calling `ɵɵallocHostVars` and `ɵɵelementHostAttrs`) Subsequent change will refactor the runtime to take advantage of the static information.
PR Close#34683
Previously, the template type-checker would always construct a generic
template context type with correct bounds, even when strictTemplates was
disabled. This meant that type-checking of expressions involving that type
was stricter than View Engine.
This commit introduces a 'strictContextGenerics' flag which behaves
similarly to other 'strictTemplates' flags, and switches the inference of
generic type parameters on the component context based on the value of this
flag.
PR Close#34649
This commit increases payload size limits for angular.io application that triggered an error after merging another commit (00f13cc074). The goal of this commit is to bring master back to a "green" state and separate investigation is required to identify the root cause for size increase.
PR Close#34913
The StackBlitz API (which we use to generate StackBlitz projects on the
fly, when a user clicks on a live example link in the docs) allows
specifying the file to open in the editor by passing a query param. If
no file is specified, StackBlitz opens a default one. In the past, it
used to be `main.ts` and nowadays it seems to be `app.component.ts`.
StackBlitz builder, the tool that we use to generate the StackBlitz
projects, allows specifying the primary file by setting the `file`
property in the corresponding `stackblitz.json`.
Previously, if the `file` property was not set, StackBlitz builder would
not specify a file, thus falling back on StackBlitz's default behavior.
This was not great, because the default behavior may change unexpectedly
is the future to something that is less useful for our users.
This commit change StackBlitz builder to always specify a primary file.
If no file is specified in `stackblitz.json`, the builder will look
for the first file that exists in the example from a list of predefined
files.
Partially addresses #22357.
PR Close#34553
The StackBlitz API (which we use to generate StackBlitz projects on the
fly, when a user clicks on a live example link in the docs) allows
specifying the file to open in the editor by passing a query param. If
no file is specified, StackBlitz opens a default one.
This commit specifies relevant landing files for some of the examples to
make it easier to engage with the examples more quickly, and to see what
the example is attempting to demonstrate.
Fixes#22357.
PR Close#34553
First we used a messages array to display messages toh-4 but it dsplayed only one message added additional messages on click of a hero
Fixes#28739
PR Close#34496
When running the e2e tests on CI, it is desirable that the build
progress is not logged, because that clutters the logs and makes it
difficult to get to the useful info in case of failures.
The previous config to achieve that doesn't work any more.
This commit update the `ci` configuration for e2e tests to suppress
build progress logging.
PR Close#34840
Previously, the examples in the `comparing-observables` guide were hard-coded.
This made it impossible to test them and verify they are correct.
This commit fixes this by converting them into a proper mini-app. In a
subsequent commit, tests will be added to verify that the source code
works as expected (and guard against regressions).
Fixes#31024
PR Close#34327
Previously, the examples in the `cli-builder` guide were hard-coded.
This made it impossible to test them and verify they are correct.
This commit fixes this by converting them into a proper mini-app. In a
subsequent commit, tests will be added to verify that the source code
works as expected (and guard against regressions).
Fixes#34314
PR Close#34362
earlier in the docs it was told that adding typescript's type checking make json response typed so changed docs to say that it adds all typescipt capabilities during compile time
Fixes#34746
PR Close#34845
With TS 3.7, these examples were running into the error below (e.g. on https://circleci.com/gh/angular/angular/574906#tests/containers/0):
```
============== AIO example output for: /home/circleci/ng/aio/content/examples/observables/
running: yarn tsc --project ./
$ /home/circleci/ng/aio/content/examples/observables/node_modules/.bin/tsc --project ./
../../../tools/examples/shared/node_modules/protractor/built/index.d.ts(5,10): error TS2440: Import declaration conflicts with local declaration of 'PluginConfig'.
../../../tools/examples/shared/node_modules/protractor/built/index.d.ts(5,24): error TS2440: Import declaration conflicts with local declaration of 'ProtractorPlugin'.
error Command failed with exit code 2.
info Visit https://yarnpkg.com/en/docs/cli/run for documentation about this command.
completed: yarn tsc --project ./
```
This happened because of https://github.com/angular/protractor/issues/5348.
It's unclear why this typings problem does not affect `ng e2e` runs, and only affects `tsc` runs.
For now it seems sensible to alter the tests to compile only the app and not the e2e, since the intent of 2cc954d5a5 was never to verify the correctness of the e2e in the first place.
We still need a release of protractor that supports TS 3.7 though, but at least it doesn't seem to block our update proper.
PR Close#33717
This simplifies the Firebase redirect config, removing a redundant
pattern (`/api/http`) which is covered by the previous pattern and
dropping an unused named captured segment (`:rest*`).
This change does not affect the redirection behavior for the deployed
apps, but allows the Firebase hosting emulator to work correctly.
(See [here][1] for more info.)
NOTE: Although we are not currently using the Firebase emulator for
development/testing, we might want to use it in the future.
[1]: https://github.com/firebase/superstatic/issues/231#issuecomment-573034515
PR Close#34726
Currently, the angular.io projects do not use Firebase's Realtime
Database and therefore we only need to configure and deploy changes for
`hosting`.
This commit removes the unused Realtime Database related configs and
files.
PR Close#34696
There was some confusion about how the service will be injected in the sentence with the `new` keyword. This PR should hopefully clear the confusion.
Fixes#34612
PR Close#34638
Previously, some of the examples in the `lazy-loading-ngmodules` guide
were hard-coded.
This commit ensures all examples in the guide are extracted from
docregions in the corresponding example project.
PR Close#34599
The main change here was to remove the updating instructions for
version 9 and instead point to update.angular.io. This ensures
we only have one "source of truth" for update instructions.
This commit also includes updates to error message text to
keep them up-to-date with live error messages (and thus keep
them searchable).
PR Close#34498
Previously, it was required that both `fullTemplateTypeCheck` and
`strictTemplates` had to be enabled for strict mode to be enabled. This
is strange, as `strictTemplates` implies `fullTemplateTypeCheck`. This
commit makes setting the `fullTemplateTypeCheck` flag optional so that
strict mode can be enabled by just setting `strictTemplates`.
PR Close#34195
in the getting started page (first tutorial) file products.ts which was not shown and was only present in the StackBlitz examples. So added a refrence that it is present in the example and also added a note that examples may carry filenames not present please look at StackBliz examples for details
Fixes#34291
PR Close#34301
This reverts commit f029af50820765019413fa319330830306b80d6a while we investigate
some failures on master on Circle CI. Currently the Windows tests and the
"test-ivy-aot" jobs are red because of incompatible yarn versions.
PR Close#34402
The headers of two of the code-snippets in the [Input section](https://angular.io/start#input)
of the "Getting Started" guide incorrectly referenced an non-existent
file path (`src/app/product-list/product-alerts.component.ts`).
This commit fixes the headers to show the correct file path
(`src/app/product-alerts/product-alerts.component.ts`).
Fixes#34320
PR Close#34321
Adds the ability to expose global symbols in the API docs via the `@globalApi` tag. Also supports optionally setting a namespace which will be added to the name automatically (e.g. `foo` will be renamed to `ng.foo`). Relevant APIs should also be exported through the `global.ts` file which will show up under `core/global`.
PR Close#34237
Rather than bumping up the allowed version of yarn on each release
we should instead just allow for anything within the major version
1 range.
PR Close#34236
On events page the header was not able to take full width when body exceeds viewport width of the screen So made the below body go overflow-x auto and resources page was taking 80% of the width which is okay on desktop but on mobile it should take 100% width put a media quer for it.
Fixes#34163
PR Close#34188
The local Angular packages used to build `aio/` when running
`yarn setup-local`/`yarn build-local` (and related commands), are built
by bazel. Bazel, determines the version to use for these locally built
packages based on the latest tag for a commit on the current branch.
(This works as expected during the release, because the packages are
built on the correct branch with up-to-date tags.)
During local development, however, this often leads to generating older
versions than what the current `@angular/cli` version is compatible
with, if the user has not fetched the latest tags from `angular/angular`
or the branch has not been rebased recently.
Previously, the above (common) situation would result in a build error
by the CLI. (Note that this would be a false error, because in this case
the version set by bazel would not reflect the actual version of the
local packages.) The solution would be for the user to fetch the latest
tags from `angular/angular`, rebase their branch and run a bazel build
again (ensuring that it would actually build anew and not emit cached
artifacts). This was cumbersome and most people didn't even know about
it.
This commit avoids this error and the associated pain-points by
overwriting the versions of the installed local packages with fake
versions based on the ones in the lockfile, which are guaranteed to be
compatible with the currently used CLI version.
Fixes#34208
PR Close#34213
We should only generate the `providedIn` property in injectable
defs if it has a non-null value. `null` does not communicate
any information to the runtime that isn't communicated already
by the absence of the property.
This should give us some modest code size savings.
PR Close#34116
For injectables, we currently generate a factory function in the
injectable def (prov) that delegates to the factory function in
the factory def (fac). It looks something like this:
```
factory: function(t) { return Svc.fac(t); }
```
The extra wrapper function is unnecessary since the args for
the factory functions are the same. This commit changes the
compiler to generate this instead:
```
factory: Svc.fac
```
Because we are generating less code for each injectable, we
should see some modest code size savings. AIO's main bundle
is about 1 KB smaller.
PR Close#34076
The missing-injectable migration has been updated to handle a breaking change that is
unrelated to missing ´@Injectable` decorators. Though, the breaking change will be handled
as part of this migration since we did not want to create another migration (with all the boilerplate etc.)
The guide has been already updated to reflect the new pattern the migration handles, but we
should also rename the title of the guide to something that also mentions the other pattern.
Not renaming the guide URL since it is referenced in past releases and it's safer to keep the old
URL. The important thing is to change the actual rendered title.
PR Close#34125
Previously, some RxJS-related examples (which are not proper Angular apps) were not
tested on CI as part of the `example-e2e` npm script. This meant that the examples
could get out-of-date or contain compile errors without as noticing.
This commit ensures that the `example-e2e` script picks up these examples and checks
that they compile successfully.
Partly addresses #28017.
PR Close#34063
Previously, the Angular AOT compiler would always add a
`ɵprov` to injectables. But in ngcc this resulted in duplicate `ɵprov`
properties since published libraries already have this property.
Now in ngtsc, trying to add a duplicate `ɵprov` property is an error,
while in ngcc the additional property is silently not added.
// FW-1750
PR Close#34085
Since we created the migration guide for the `missing-injectable` schematic, the schematic
changed in various ways. e.g. the migration no longer migrates classes passed to `useExisting`
Additionally the migration has been expanded to handle another Ivy breaking change where
providers like `{provide: X}` will be intepreted as `{provide: X, useClass: X}`. This pattern should
be documented in the migration guide.
PR Close#33960
Judy Bogart
Sonu Kapoor
Michiel Kikkert
Ajit Singh
Alan Agius
George Kalpakas
David Shevitz 🔵
Sonu Kapoor
Santosh Yadav
Paul Gschwendtner
Kara Erickson
Matias Niemelä
Igor Minar
Misko Hevery
Andrew Scott
Martin Sikora
Maximilian Koeller
Grant Fleming
Joey Perrott
Annie Wang
木杉
Tony Bove
crisbeto
Stephen Fluin
Kapunahele Wong
Rajat Soni
Mansour Fall
Sachin Grover
Priyash Patil
Doguhan Uluca
Ferdinand Malcher
Alexey Okhrimenko
JiaLiPassion
John Papa
Faouzi Medebbeb
Aristeidis Bampakos
Abraham Williams
profanis
Andrew Kushnir
Alex Eagle
Yvonne Allen
Stefanie Fluin
dishanfernando
jornare
tresor616
Daniil Gorbunov
Pete Bacon Darwin
John Ralph Umandal
Benjamin Kindle
Georgii Dolzhykov
Jeffrey Bosch
Alex Rickabaugh
Esteban Gehring
Pawel Kozlowski
Chives
Greg Magolan
Oleg Teterin
Schneider
Filipe Silva
Sasha Rudan
Joey Perrott
陈旭
frosty
Turtuvshin Byambaa
philonor
Aravind
Kristina Gocheva
GavinMK
Adam
mikef
Do Nhu Vy
arturovt
Sam Julien
ghiscoding
dependabot[bot]
ShubhrankR
Jeff Held
Sholka Jadav
JoostK
owenmecham
Jonathan Sharpe
Luka Petrovic
Matt Janssen
Denys Vuika
Kwinten Pisman
Amadou Sall
Charles Lyding
Nikita Potapenko
